USGS Science⌕ Search

SEARCH · USGS Science

Results for “Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92Linked to original sources
USGS1993

Short-term water and suspended-sediment fluctuations in a Louisiana marsh

To determine the timing of and driving forces for sediment suspension and deposition and the effect of impoundment, three self-recording instrument packages were deployed in a section of Louisiana marsh. Two of the packages went into an impoundment and one into an adjacent open, or control, area. A data logger in the package controlled sensors to measure water level, velocity, salinity, and temperature and suspended sediment concentration. At one impoundment site and the control site, weather stations recorded wind speed and direction. This paper describes and discusses the results.

Conference Paper↗
USGS1993

U.S. Geological Survey bedload sampling policy

During the late 1960's, the U.S. Geological Survey's (USGS) Water Resources Division (WRD) developed the Helley-Smith bedload sampler. Since then, the USGS and the Technical Committee of the Federal Interagency Subcommittee on Sedimentation (Technical Committee) have performed extensive flume and field studies concerning the calibration and use of bedload samplers. The policy and guidelines described in this paper are the results of this effort and are the current USGS policy and guidelines for the collection of bedload data.

Conference Paper↗
USGS1996

Interpreting the ASTM 'content standard for digital geospatial metadata'

ASTM and the Federal Geographic Data Committee have developed a content standard for spatial metadata to facilitate documentation, discovery, and retrieval of digital spatial data using vendor-independent terminology. Spatial metadata elements are identifiable quality and content characteristics of a data set that can be tied to a geographic location or area. Several Office of Management and Budget Circulars and initiatives have been issued that specify improved cataloguing of and accessibility to federal data holdings. An Executive Order further requires the use of the metadata content standard to document digital spatial data sets. Collection and reporting of spatial metadata for field investigations performed for the federal government is an anticipated requirement. This paper provides an overview of the draft spatial metadata content standard and a description of how the standard could be applied to investigations collecting spatially-referenced field data.

Conference Paper↗
USGS1995

Trend analyses of sediment data for the DEC project

Daily stream discharge, suspended-sediment concentration, and suspended-sediment discharge data were collected at eight sites in six watersheds of the Demonstration Erosion Control project in the Yazoo River Basin in north-central Mississippi during the period July 1985 through September 1991. The project is part of an ongoing interagency program of planning, design, construction, monitoring, and evaluation to alleviate flooding, erosion, sedimentation, and water-quality problems for watersheds located in the bluff hills upstream of the Mississippi River alluvial plain. This paper presents preliminary results of trend analyses for stream discharge and sediment data for the eight project sites. More than 550 stream discharge measurements and 20,000 suspended-sediment samples have been collected at the eight sites since 1985.

Conference Paper↗
USGS1997

Impact of an extreme event on the sediment budget: Hurricane Andrew in the Louisiana barrier islands

This paper examines the influence of Hurricane Andrew on the sediment budget of an 80-kilometer section of the Louisiana barrier islands west of the modern Mississippi delta. Because long-term bathymetric change has been extensively studied in this area, excellent baseline data are available for evaluating the impact of Hurricane Andrew. Results show that despite the high intensity of the storm and a storm track optimally positioned to impact the study area, the storm did not have an overwhelming influence on the sediment budget when compared to the changes occurring over the previous 50 years. For the Louisiana barrier islands, a 50-year record appears to be adequate for averaging the long-term contributions of both major and minor storm events to the sediment budget.

Louisiana↗
USGS1997

Status of downstream fish passage at hydroelectric projects in the northeast, USA

In the northeastern United States several guidance, protection, and conveyance methods have been employed to assist downstream migrating fish. Overlay racks, standard bar racks with close spacing, louvers, curtain walls, guide walls, netting, and other means have been used to guide and protect fish from entrainment. The design process of these facilities comprises consideration of various factors, including flow approach, attraction flow, guidance and protection devices, bypass location, conveyance mechanism, and plunge pool conditions. This paper presents the status of the design criteria for downstream fish passage facilities at hydroelectric sites in the northeast part of the United States. Examples of existing facilities are given.

Conference Paper↗
USGS1997

Resistance formulas in hydraulics-based models for routing debris flows

The one-dimensional, cross-section-averaged flow equations formulated for routing debris flows down a narrow valley are identical to those for clear-water flow, except for the differences in the values of the flow parameters, such as the momentum (or energy) correction factor, resistance coefficient, and friction slope. Though these flow parameters for debris flow in channels with cross-sections of arbitrary geometric shape can only be determined empirically, the theoretical values of such parameters for debris flow in wide channels exist. This paper aims to derive the theoretical resistance coefficient and friction slope for debris flow in wide channels using a rheological model for highly-concentrated, rapidly-sheared granular flows, such as the generalized viscoplastic fluid (GVF) model. Formulating such resistance coefficient or friction slope is equivalent to developing a generally applicable resistance formula for routing debris flows. Inclusion of a nonuniform term in the expression of the resistance formula proves useful in removing the customary assumption that the spatially varied resistance at any section is equal to what would take place with the same rate of flow passing the same section under conditions of uniformity. This in effect implies an improvement in the accuracy of unsteady debris-flow computation.

Conference Paper↗
USGS1999

Utilization of the gypsum from a wet limestone flue gas desulfurization process

The authors have been developing a process which converts FGD-gypsum to ammonium sulfate fertilizer with precipitated calcium carbonate as a by-product during the conversion. Preliminary cost estimates suggest that the process is economically feasible when ammonium sulfate crystals are produced in a granular size (1.2 to 3.3 mm), instead of a powder form. However, if additional revenue from the sale of the PCC for higher-value commercial application is applicable, this could further improve the economics of the process. Ammonium sulfate is known to be an excellent source of nitrogen and sulfur in fertilizer for corn and wheat production. It was not known what impurities might co-exist in ammonium sulfate derived from scrubber gypsum. Before the product could be recommended for use on farm land, the impurities and their impact on soil productivity had to be assessed. The objectives of this phase of the study were to evaluate the chemical properties of ammonium sulfate made from the FGD-gypsum, to estimate its effects on soil productivity, and to survey the marketability of the two products. The results of this phase of the study indicated that the impurities in the ammonium sulfate produced would not impose any practical limitations on its use at application levels used by farmers. The market survey showed that the sale price of solid ammonium sulfate fertilizer increased significantly from 1974 at $110/ton to 1998 at $187/ton. Utilities currently pay $16 to $20/ton for the calcium carbonate they use in their flue gas scrubber system. The industries making animal-feed grade calcium supplement pay $30/ton to $67/m-ton for their source of calcium carbonate. Paper, paint, and plastic industries pay as much as $200 to $300/ton for their calcium carbonate filers. The increased sale price of solid ammonium sulfate fertilizer and the possible additional revenue from the sale of the PCC by-product could further improve the economics of producing ammonium sulfate from FGD-gypsum.

Conference Paper↗
USGS1998

Large-area mapping of biodiversity

The age of discovery, description, and classification of biodiversity is entering a new phase. In responding to the conservation imperative, we can now supplement the essential work of systematics with spatially explicit information on species and assemblages of species. This is possible because of recent conceptual, technical, and organizational progress in generating synoptic views of the earth's surface and a great deal of its biological content, at multiple scales of thematic as well as geographic resolution. The development of extensive spatial data on species distributions and vegetation types provides us with a framework for: (a) assessing what we know and where we know it at meso-scales, and (b) stratifying the biological universe so that higher-resolution surveys can be more efficiently implemented, coveting, for example, geographic adequacy of specimen collections, population abundance, reproductive success, and genetic dynamics. The land areas involved are very large, and the questions, such as resolution, scale, classification, and accuracy, are complex. In this paper, we provide examples from the United States Gap Analysis Program on the advantages and limitations of mapping the occurrence of terrestrial vertebrate species and dominant land-cover types over large areas as joint ventures and in multi-organizational partnerships, and how these cooperative efforts can be designed to implement results from data development and analyses as on-the-ground actions. Clearly, new frameworks for thinking about biogeographic information as well as organizational cooperation are needed if we are to have any hope of documenting the full range of species occurrences and ecological processes in ways meaningful to their management. The Gap Analysis experience provides one model for achieving these new frameworks.

Conference Paper↗
USGS1999

Natural attenuation of chloroacetinilide herbicides in aquatic systems

Chloroacetanilide herbicides (e.g. alachlor and metolachlor) and their breakdown products are frequently found in agriculturally impacted and other natural waters. Although these compounds are usually present at low concentrations in aquatic systems, defining their fate and attenuation rate is important because they can be toxic at comparatively low exposure levels. This paper summarizes results from a four-year research program assessing factors that affect herbicide attenuation rates and breakdown product formation patterns in aquatic systems. Over 70 different field microcosms (11.3 m 3 cylindrical fiberglass tanks) were selectively manipulated (in replicate) to create nine unique aquatic ecosystems for this study. Alachlor and/or metolachlor were added to these units and transformations were observed over time. Alachlor half-lives ranged from 6.0 days to more than 100 days depending upon the temperature, oxygen conditions, and the nutrient conditions in the microcosm waters. The highest rates of alachlor decay were observed in warm, nutrient-rich, anaerobic water columns, whereas the lowest alachlor decay rates were observed under cooler, aerobic, oligotrophic water conditions. Similar relationships were observed for metolachlor, although metolachlor decay rates were about 40% slower. Our data suggest that herbicides will decay rapidly in waters that are high in nutrients possibly resulting from human activities. Alternately, low nutrient or pristine waters will have the lowest rates of herbicide decay. On a policy level, all efforts should be made to prevent exposure of comparatively pristine waters to herbicide inputs.

Conference Paper↗
USGS1998

Tidal creek changes at the Sonoma Baylands restoration site

Over the past 150 years, human activity has had a major impact on tidal wetlands adjoining the San Francisco Bay-Delta estuary Growing concern about the effect of this change on the ecology of the estuary has prompted Bay area managers to attempt to reclaim tidal wetlands. The Sonoma Baylands Restoration Project is designed to use dredge material to convert 348 acres from farmland to wetland. This paper describes changes to a tidal creek that flows from that restoration site to San Pablo Bay (north San Francisco Bay) through an existing tidal wetland during different phases of the project. Hydrologic measurements near the bottom of the creek and cross-creek profiles show how the creek responded to non-tidal flow conditions introduced by filling the site with dredge materials. At the time of this study, the creek had deepened by approximately 40 cm but had not widened.

Conference Paper↗
USGS1998

On sediment and habitat in the Upper Animas River watershed, Colorado

The Upper Animas River watershed in southwestern Colorado is located in the San Juan mountains and has been intensively mined. Active mining has essentially ceased but the impact of past mining on the aquatic ecosystem continues. This paper presents initial results from a study to determine the characteristics of the physical habitat for aquatic animals and the sediment characteristics as related to the habitat. The habitat for trout is limited by high streamflows and by winter conditions. Only the winter habitat limits are considered. The characteristics of the sediment in the river limit the winter habitat along with metals within the substrate.

Conference Paper↗
USGS1998

Pier-scour depths affected by clay in Mississippi

This paper briefly presents pier-scour depths measured during 1943-94, that are thought to have been affected by consolidated cohesive materials (clay) in Mississippi. MDOT soil reports were available for 29 measured pier-scour depths thought to be affected by clay. The cohesion and friction angles were approximated for the clay, and using the soil borings where clay was overlain by sand and(or) gravel, the top of the clay stratum was approximated in order to determine the net scour through the clay. Eight additional measured pier-scour depths were thought to be affected by clay, but no MDOT soil reports or borings were available. The net pier-scour depth through the clay is a rough approximation where sand and (or) gravel overlie a clay stratum and, therefore, only represents part of the total pier-scour depth. Limited data indicate the pier-scour depth decreases as shear strength of the clay increases.

Conference Paper↗
USGS1999

Strategies for ensuring global consistency/comparability of water-quality data

In the past 20 years the water quality of the United States has improved remarkably-the waters are safer for drinking, swimming, and fishing. However, despite many accomplishments, it is still difficult to answer such basic questions as: 'How clean is the water?' and 'How is it changing over time?' These same questions exist on a global scale as well. In order to focus water-data issues in the United States, a national Intergovernmental Task Force on Monitoring Water Quality (ITFM) was initiated for public and private organizations, whereby key elements involved in data collection, analysis, storage, and management could be made consistent and comparable. The ITFM recommended and its members are implementing a nationwide strategy to improve water-quality monitoring, assessment, and reporting activities. The intent of this paper is to suggest that a voluntary effort be initiated to ensure the comparability and utility of hydrological data on a global basis. Consistent, long-term data sets that are comparable are necessary in order to formulate ideas regarding regional and global trends in water quantity and quality. The author recommends that a voluntary effort similar to the ITFM effort be utilized. The strategy proposed would involve voluntary representation from countries and international organizations (e.g. World Health Organization) involved in drinking-water assessments and/or ambient water-quality monitoring. Voluntary partnerships such as this will improve curability to reduce health risks and achieve a better return on public and private investments in monitoring, environmental protection, and natural resource management, and result in a collaborative process that will save millions of dollars.In this work it is suggested that a voluntary effort be initiated to ensure the comparability and utility of hydrological data on a global basis. The strategy proposed would involve voluntary representation from countries and international organizations involved in drinking-water assessments and/or ambient water-quality monitoring.

Conference Paper↗
USGS2000

11 things a geologist thinks an engineer should know about carbonate beaches

A review is given on the geological aspects of carbonate beaches that a geologist thinks may be useful for an engineer. Though, Geologists not involved in engineering problems may find it difficult to know what an engineer should understand about carbonate beaches. Nevertheless, there are at least eleven topics that are potentially very useful for engineers to keep in mind. This paper emits the discussions of certain kinds of carbonate shorelines that are beyond the scope of engineering issues, and focuses on sand-sized coastal carbonate deposits.

Conference Paper↗
USGS2000

Oil and gas reserve growth-a model for the Volga-Ural Province, Russia

An understanding of reserve growth in known oil and gas fields has become a critical component of energy resource analysis. Significant statistical studies of reserve growth have been published in the U.S., whereas little information is available on other regions of the world. It may be expected that in many countries the magnitude of reserve growth is different from that in the U.S. because of differences in reporting systems and in exploration and production practices. This paper describes the results of a reserve growth study in a group of largest oil and gas fields of the Volga-Ural petroleum province, Russia. The dynamics of reserve growth in these fields shows rapid reserve additions during the first 5 years of field exploration and development, which results from intensive step-out and delineation drilling. Later reserve growth is slow and is related to improvements in recovery technologies and discoveries of new pools and extensions. These two stages of reserve growth are described by two different groups of empirical models. A comparison of these models with the models developed for the lower 48 states and Gulf Coast offshore of the U.S. demonstrates that the reserve growth in the Volga-Ural province is significantly lower than in the U.S. The proposed models may be used for assessment of future reserve additions in known fields of countries that presently have or recently had a centrally-planned economic system.

Conference Paper↗
USGS2000

Studies of volcanoes of Alaska by satellite radar interferometry

Interferometric synthetic aperture radar (InSAR) has provided a new imaging geodesy technique to measure the deformation of volcanoes at tens-of-meter horizontal resolution with centimeter to subcentimeter vertical precision. The two-dimensional surface deformation data enables the construction of detailed numerical models allowing the study of magmatic and tectonic processes beneath volcanoes. This paper summarizes our recent: InSAR studies over the Alaska-Aleutian volcanoes, which include New Trident, Okmok, Akutan, Augustine, Shishaldin, and Westdahl volcanoes. The first InSAR surface deformation over the Alaska volcanoes was applied to New Trident. Preliminary InSAR study suggested that New Trident volcano experienced several centimeters inflation from 1993 to 1995. Using the InSAR technique, we studied the 1997 eruption of Okmok. We have measured ???1.4 m deflation during the eruption, ???20 cm pre-eruptive inflation during 1992 to 1995, and >10 cm post-eruptive inflation within a year after the eruption, and modeled the deformations using Mogi sources. We imaged the ground surface deformation associated with the 1996 seismic crisis over Akutan volcano. Although seismic swarm did not result in an eruption, we found that the western part of the volcano uplifted ???60 cm while the eastern part of the island subsided. The majority of the complex deformation field at the Akutan volcano was modeled by dike intrusion and Mogi inflation sources. Our InSAR results also indicate that the pyroclastic flows from last the last eruption have been undergoing contraction/subsidence at a rate of about 3 cm per year since 1992. InSAR measured no surface deformation before and during the 1999 eruption of Shishaldin and suggested the eruption may be a type of open system. Finally, we applied satellite radar interferometry to Westdahl volcano which erupted 1991 and has been quiet since. We discovered this volcano had inflated about 15 cm from 1993 to 1998. In summary, satellite radar interferometry can not only be used to study a volcanic eruption, but also to detect aseismic deformation at quiescent volcanoes preceding a seismic swarm; it is a useful technique to study volcanic eruptions as well as to guide scientists to better focus their monitoring efforts.

Alaska↗
USGS2001

Results From a Channel Restoration Project: Hydraulic Design Considerations

Techniques for the hydraulic restoration of placer-mined streams and floodplains were developed in Denali National Park and Preserve, Alaska. The two-year study at Glen Creek focused on a design of stream and floodplain geometry using hydraulic capacity and shear stress equations. Slope and sinuosity values were based on regional relationships. Design requirements included a channel capacity for a bankfull discharge and a floodplain capacity for a 1.5- to 100-year discharge. Several bio-engineering techniques using alder and willow, including anchored brush bars, streambank hedge layering, seedlings, and cuttings, were tested to dissipate floodwater energy and encourage sediment deposition until natural revegetation stabilized the new floodplains. Permanently monumented cross-sections installed throughout the project site were surveyed every one to three years. Nine years after the project began, a summer flood caused substantial damage to the channel form, including a change in width/depth ratio, slope, and thalweg location. Many of the alder brush bars were heavily damaged or destroyed, resulting in significant bank erosion. This paper reviews the original hydraulic design process, and describes changes to the channel and floodplain geometry over time, based on nine years of cross-section surveys.

Conference Paper↗