USGS Science⌕ Search

SEARCH · USGS Science

Results for “Special Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91Linked to original sources

Results of a workshop concerning assessment of the functions of bottomland hardwoods

The U.S. Environmental Protection Agency (EPA) is authorized under Section 404 of the Clean Water Act (33 U.S.C. 1344) to participate in the regulation of the discharge of dredged or fill material into waters of the United States. This regulatory authority is exercised in partnership with the U.S. Army Corps of Engineers, which has responsibility for permit issuance, and in consultation with the U.S. Fish and Wildlife Service and the National Marine Fisheries Service. Through amendments to the original statute, a series of legal actions and court decisions, and the development of operating guidance among the responsible agencies, Section 404 has evolved into the primary mechanism afforded Federal authorities for the protection of wetlands. EPA recognizes the importance of wetlands in achieving the goals of the Clean Water Act, which are to protect and maintain the chemical, physical, and biological integrity of the Nation’s waters. EPA Administrator Lee Thomas has identified wetlands protection as among the highest of Agency priorities. EPA recognizes that bottomland hardwood (BLH) wetlands have vital and unique attributes that, if lost, would severely impact the physical, chemical, and biological integrity of the Nation's waters. As part of a broad program to better protect the Nation's wetlands, EPA has therefore identified bottomland hardwood wetlands as a priority resource requiring special attention on a national basis. Recognizing the importance of implementing an effective, nationally consistent, and scientifically defensible regulatory program, EPA, in October 1984, issued Interim Operating Guidance to its field personnel for implementing the Section 404 regulatory program in bottomland hardwood wetlands. With the goal of improving and finalizing that guidance, EPA is sponsoring a series of workshops designed to answer key questions concerning BLH wetlands, based on the best scientific and technical information currently available. The first two workshops were directed toward summarizing existing scientific and technical knowledge concerning the functions of BLH ecosystems, the characteristics that are important to each function, and the impact of various development activities on those characteristics. The first workshop, which was held in St. Francisville, Louisiana, in December, 1984, examined a wetland zonation concept as a framework for gaining a greater understanding of BLH structure and function. The workshop set out to determine whether characterization of BLH resources as a series of relatively distinct zones, defined by concomitant variation in hydrologic regime, soils, and vegetation, might provide the basis for a useful and scientifically sound regulatory framework. For examp1e, if certain zones are of particular importance to one or more wetland functions that the Clean Water Act was intended to protect, then the zonation concept might be useful from the perspective of how various activities should be regulated. Discussions during the first workshop, however, indicated that the zonation concept provides, at best, only an incomplete picture of the structure and function of BLH ecosystems. In many cases, BLH functions are not limited to or closely correlated with particular zones and, furthermore, many factors other than zone are important determinants of BLH functions. With these responses in mind, the second workshop, held at Lake Lanier, Georgia, in July, 1985, was designed to elicit information on two questions. First, if zones are not an adequate framework for understanding the functions of BLH systems, what characteristics (predictors) can be used to assess the extent to which a particular site performs these functions? And second, what are the impacts of various development activities that often occur in BLH ecosystems on those characteristics and thus on the functions themselves? At the second workshop, individual workgroups dealing with particular subject areas (e.g., hydrology, water quality, fisheries, wildlife, ecosystem processes, and cultural/recreational/economic resources) were able to identify site characteristics that are important determinants of the performance of various functions. For example, the Hydrology Workgroup identified flood storage as one of three major hydrologic functions that BLH ecosystems perform. The workgroup then identified the most important characteristic (e.g., surface area of the site, soil saturation, and others) that determine flood storage and the likely impact of several common activities (e.g., conversion to soybean production and levee construction) on these characteristics. Some of the workgroups also provided estimates of the aggregate impact of activities, acting through all of the characteristics, on certain functions. The workgroups also identified key characteristics that could be used to identify high-value wetlands for various functions. In addition, the workgroups pointed out a number of topics needing further examination and discussion. First, all of the workgroups identified the need to develop the technical basis and information sources to address the problem of cumulative impacts in the regulatory process. Second, most of the workgroups noted the important of contextual variables in assessing the function of a particular site. For example, the location of a BLH site in relationship to other tracts of habitat is an important variable for many wildlife species. Similarly, the extent to which a site retains or transforms contaminants is depended not only on the characteristics of the site, but also on its position in a watershed relative to contaminant inputs. And finally, several of the workgroups pointed out that assessing the impact of an activity on a function is not as simple as "adding up" the impact on individual characteristics, but may depend instead on complex interactions among characteristics. Addressing these questions, as summarized in the objectives and discussions that follow, was the focus of the third workshop, the results of which are described in this report.

Report↗

Status of groundwater quality in the Borrego Valley, Central Desert, and Low-Use Basins of the Mojave and Sonoran Deserts study unit, 2008-2010: California GAMA Priority Basin Project

Groundwater quality in the approximately 963-square-mile Borrego Valley, Central Desert, and Low-Use Basins of the Mojave and Sonoran Deserts study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is located in southern California in San Bernardino, Riverside, San Diego, and Imperial Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey and the Lawrence Livermore National Laboratory. The GAMA Borrego Valley, Central Desert, and Low-Use Basins of the Mojave and Sonoran Deserts study was designed to provide a spatially unbiased assessment of the quality of untreated (raw) groundwater in the primary aquifer system. The assessment is based on water-quality and ancillary data collected by the U.S. Geological Survey from 52 wells (49 grid wells and 3 understanding wells) and on water-quality data from the California Department of Public Health database. The primary aquifer system was defined by the depth intervals of the wells listed in the California Department of Public Health database for the Borrego Valley, Central Desert, and Low-Use Basins of the Mojave and Sonoran Deserts study unit. The quality of groundwater in the primary aquifer system may be different from that in the shallower or deeper water-bearing zones; shallow groundwater may be more vulnerable to surficial contamination. This study assesses the status of the current quality of the groundwater resource by using data from samples analyzed for volatile organic compounds (VOCs), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources in the primary aquifer system of the Borrego Valley, Central Desert, and Low-Use Basins of the Mojave and Sonoran Deserts study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than 1.0 indicates a concentration greater than a benchmark, and a relative-concentration less than or equal to 1.0 indicates a concentration equal to or less than a benchmark. Relative-concentrations of organic constituents and special-interest constituents [perchlorate and N-nitrosodimethylamine (NDMA)] were classified as high (relative-concentration greater than 1.0), moderate (relative-concentration greater than 0.1 and less than or equal to 1.0), or low (relative-concentration less than or equal to 0.1). Relative-concentrations of inorganic constituents were classified as high (relative-concentration greater than 1.0), moderate (relative-concentration greater than 0.5 and less than or equal to 1.0), or low (relative-concentration less than or equal to 0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifer system with a high relative-concentration for a particular constituent or class of constituents; this percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentages of the primary aquifer system with moderate and low relative-concentrations, respectively, of a constituent or class of constituents. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable to each other (within 90-percent confidence intervals) in the study unit. Inorganic constituents (one or more) with health-based benchmarks were detected at high relative-concentrations in 48 percent of the primary aquifer system and at moderate relative-concentrations in 26 percent of the primary aquifer system. The high aquifer-scale proportion of inorganic constituents primarily reflected high aquifer-scale proportions of fluoride (27 percent), arsenic (18 percent), molybdenum (16 percent), boron (10 percent), uranium (5.6 percent), gross alpha radioactivity (9.7 percent), and nitrate (2.7 percent). The inorganic constituents with secondary maximum contaminant levels (SMCLs) were detected at high relative-concentrations in 13 percent of the primary aquifer system and at moderate relative-concentrations in 39 percent. The high aquifer-scale proportion for SMCL constituents reflected high aquifer-scale proportions of total dissolved solids (TDS, 11 percent), manganese (2.8 percent), and chloride (2.8 percent). Organic constituents were not detected at high relative-concentrations in the primary aquifer system, and were present at moderate relative-concentrations in 5.0 percent, and at low relative-concentrations or were not detected in 95 percent of the primary aquifer system. Of the 148 organic constituents analyzed, 12 constituents were detected. Two organic constituents, chloroform and tetrachloroethene (PCE), were detected in more than 10 percent of samples, but were detected mostly at low relative-concentrations.

California↗

Geochemical Exploration Techniques Applicable in the Search for Copper Deposits

Geochemical exploration is an important part of copper-resource evaluation. A large number of geochemical exploration techniques, both proved and untried, are available to the geochemist to use in the search for new copper deposits. Analyses of whole-rock samples have been used in both regional and local geochemical exploration surveys in the search for copper. Analyses of mineral separates, such as biotite, magnetite, and sulfides, have also been used. Analyses of soil samples are widely used in geochemical exploration, especially for localized surveys. It is important to distinguish between residual and transported soil types. Orientation studies should always be conducted prior to a geochemical investigation in a given area in order to determine the best soil horizon and the best size of soil material for sampling in that area. Silty frost boils, caliche, and desert varnish are specialized types of soil samples that might be useful sampling media. Soil gas is a new and potentially valuable geochemical sampling medium, especially in exploring for buried mineral deposits in arid regions. Gaseous products in samples of soil may be related to base-metal deposits and include mercury vapor, sulfur dioxide, hydrogen sulfide, carbon oxysulfide, carbon dioxide, hydrogen, oxygen, nitrogen, the noble gases, the halogens, and many hydrocarbon compounds. Transported materials that have been used in geochemical sampling programs include glacial float boulders, glacial till, esker gravels, stream sediments, stream-sediment concentrates, and lake sediments. Stream-sediment sampling is probably the most widely used and most successful geochemical exploration technique. Hydrogeochemical exploration programs have utilized hot- and cold-spring waters and their precipitates as well as waters from lakes, streams, and wells. Organic gel found in lakes and at stream mouths is an unproved sampling medium. Suspended material and dissolved gases in any type of water may also be useful media. Samples of ice and snow have been used for limited geochemical surveys. Both geobotanical and biogeochemical surveys have been successful in locating copper deposits in many parts of the world. Micro-organisms, including bacteria and algae, are other unproved media that should be studied. Animals can be used in geochemical-prospecting programs. Dogs have been used quite successfully to sniff out hidden and exposed sulfide minerals. Tennite mounds are commonly composed of subsurface material, but have not as yet proved to be useful in locating buried mineral deposits. Animal tissue and waste products are essentially unproved but potentially valuable sampling media. Knowledge of the location of areas where trace-element-associated diseases in animals and man are endemic as well as a better understanding of these diseases, may aid in identifying regions that are enriched in or depleted of various elements, including copper. Results of analyses of gases in the atmosphere are proving valuable in mineral-exploration surveys. Studies involving metallic compounds exhaled by plants into the atmosphere, and of particulate matter suspended in the atmosphere are reviewed these methods may become important in the future. Remote-sensing techniques are useful for making indirect measurements of geochemical responses. Two techniques applicable to geochemical exploration are neutron-activation analysis and gamma-ray spectrometry. Aerial photography is especially useful in vegetation surveys. Radar imagery is an unproved but potentially valuable method for use in studies of vegetation in perpetually clouded regions. With the advent of modern computers, many new techniques, such as correlation analysis, regression analysis, discriminant analysis, factor analysis, cluster analysis, trend-surface analysis, and moving-average analysis can be applied to geochemical data sets. Selective use of these techniques can provide new insights into the interpretatio

Professional Paper↗

Monitoring lahars

Introduction Lahars, or debris flows that originate from a volcano (Pierson and Scott, 1985; Pierson, 1995), are among the most destructive, far-reaching, and persistent hazards on stratovolcanoes. Lahars may be triggered by syneruptive rapid melting of snow and ice, lake breakouts, or heavy rains in conjunction with large eruptive columns. Alternatively, lahars can follow eruptions, when clastic deposits are mobilized by heavy rainfall or lake breakouts, occurring sporadically for years to decades after large eruptions. Some lahars can travel many tens of kilometers in river drainages stemming from volcanoes, as during the 1980 eruption of Mount St. Helens (Washington) (for example, Janda and others, 1981), recent eruptions of Redoubt Volcano (Alaska) (fig. H1; Dorava and Meyer, 1994; Waythomas and others, 2013), and the 1991 eruption of Mount Pinatubo (Philippines) (Major and others, 1996; Pierson and others, 1996). Large lahars are less likely in the absence of eruptive activity, but still possible. The Electron Mudflow at Mount Rainier (approximately A.D. 1500), Wash., is an example of a potential noneruptive lahar, likely initiated by a spontaneous collapse of weak rock, that reached the Puget Lowland after it flowed dozens of kilometers without a recognized eruptive trigger (Sisson and Vallance, 2009). The extreme hazard posed by lahars was demonstrated tragically by the 1985 Nevado del Ruiz (Colombia) catastrophe that claimed the lives of more than 20,000 people (Naranjo and others, 1986). The potential to provide warnings of minutes to hours in advance of lahar arrival in a populated area (for example, Voight, 1990) is a strong reason to provide special monitoring attention to the hazard. Populated river valleys are located downstream from many very high threat and high threat volcanoes, and these areas could be affected by lahars (for example, Hoblitt and others, 1998). The volume and mobility of lahars are two characteristics that can influence the extent of downstream effects (for example, George and others, 2022). The flows that reach the farthest downstream are mobile and voluminous. Additionally, entrainment of material as a lahar travels downstream may increase the volume, and a lahar that starts small may grow to a destructive size under certain conditions. Increasingly, stratovolcanoes host recreational enthusiasts who could be affected by relatively localized geologic hazards, such as rainfall-induced debris flows, glacial outburst floods, rockfalls, and avalanches. These types of events can be common on many volcanoes, occurring seasonally in the case of debris flows and several times per year in the case of avalanches and rockfalls (for example, Allstadt and others, 2018). Many very high threat stratovolcanoes, especially within the contiguous United States, have low eruption frequencies (less than once per century), such that monitoring networks could be used more often for detection and characterization of small surface flows than for identification of volcanic unrest. Such information can be used to validate avalanche forecasts, inform rescue efforts, or notify other agencies of potentially damaged infrastructure (for example, roads, powerlines, or trails). Note that although many of these smaller surface flows create seismic and infrasound waves, the signals are typically highly distorted by the complex volcanic topography and geology. In general, the smaller the flow, the weaker the geophysical signals that it generates, and thus a denser geophysical network is required to study smaller flows (for example, Allstadt and others, 2018). Lahar detection may not be an appropriate or necessary monitoring capability for all volcanoes. Some very high threat volcanoes, like Kīlauea and Mauna Loa, have no lahar hazards currently, and thus no detection, tracking, and characterization capabilities for lahars are needed. At other very high threat volcanoes, such as Pavlof Volcano, Alaska, lahars might be common but pose minimal threat because the volcano is so remote. Ideally, the local observatory would understand the combination of hazard and risk associated with surface flows and assign monitoring and detection capabilities appropriately. Several volcano monitoring techniques (for example, Real-Time Seismic Amplitude Measurement [RSAM], amplitude-based locations, and infrasound array processing) can be adapted to also detect, characterize, and track debris flows, lahars, and other surface flows, so instrumentation installed for detecting volcanic unrest and eruptions can have multiple purposes. The utility of instrumentation for the purpose of monitoring unrest and lahars further justifies the importance and utility of a dense network of monitoring stations, even if the volcano remains quiescent.

Scientific Investigations Report↗

Status of groundwater quality in the Southern, Middle, and Northern Sacramento Valley study units, 2005-08: California GAMA Priority Basin Project

Groundwater quality in the Southern, Middle, and Northern Sacramento Valley study units was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study units are located in California’s Central Valley and include parts of Butte, Colusa, Glenn, Placer, Sacramento, Shasta, Solano, Sutter, Tehama, Yolo, and Yuba Counties. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey and the Lawrence Livermore National Laboratory. The three study units were designated to provide spatially-unbiased assessments of the quality of untreated groundwater in three parts of the Central Valley hydrogeologic province, as well as to provide a statistically consistent basis for comparing water quality regionally and statewide. Samples were collected in 2005 (Southern Sacramento Valley), 2006 (Middle Sacramento Valley), and 2007–08 (Northern Sacramento Valley). The GAMA studies in the Southern, Middle, and Northern Sacramento Valley were designed to provide statistically robust assessments of the quality of untreated groundwater in the primary aquifer systems that are used for drinking-water supply. The assessments are based on water-quality data collected by the USGS from 235 wells in the three study units in 2005–08, and water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer systems (hereinafter, referred to as primary aquifers) assessed in this study are defined by the depth intervals of the wells in the CDPH database for each study unit. The quality of groundwater in shallow or deep water-bearing zones may differ from quality of groundwater in the primary aquifers; shallow groundwater may be more vulnerable to contamination from the surface. The status of the current quality of the groundwater resource was assessed by using data from samples analyzed for volatile organic compounds (VOC), pesticides, and naturally occurring inorganic constituents, such as major ions and trace elements. This status assessment is intended to characterize the quality of groundwater resources within the primary aquifers of the three Sacramento Valley study units, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentrations divided by benchmark concentrations) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than 1.0 indicates a concentration greater than a benchmark. For organic (volatile organic compounds and pesticides) and special-interest (perchlorate) constituents, relative-concentrations were classified as high (greater than 1.0); moderate (equal to or less than 1.0 and greater than 0.1); or low (equal to or less than 0.1). For inorganic (major ion, trace element, nutrient, and radioactive) constituents, the boundary between low and moderate relative-concentrations was set at 0.5. Aquifer-scale proportions were used in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifers that have a relative-concentration greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the percentage of the primary aquifers that have moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based, which used one value per grid cell, and spatially-weighted, which used the full dataset—were used to calculate aquifer-scale proportions for individual constituents and classes of constituents. High and moderate aquifer-scale proportions were significantly greater for inorganic constituents than organic constituents in all three study units. In the Southern Sacramento Valley study unit, relative-concentrations for one or more inorganic constituents with health-based benchmarks (HBBs) were high in 30 percent (%), moderate in 30%, and low in 40% of the primary aquifer. In the Middle Sacramento Valley study unit, aquifer-scale proportions for inorganic constituents with HBBs were high in 24%, moderate in 38%, and low in 38% of the primary aquifer. Arsenic, boron, and nitrate were detected at high relative-concentrations in the Southern and Middle Sacramento Valley study units. In the Northern Sacramento Valley study unit, high, moderate, and low relative-concentrations of inorganic constituents relative to HBBs were 2.1, 12, and 86% of the primary aquifer, respectively. Arsenic was the only constituent detected at high relative-concentrations. The high aquifer-scale proportions for inorganic constituents with non-health-based benchmarks were 32, 27, and 4.6% of the primary aquifer for the Southern, Middle, and Northern Sacramento Valley study units, respectively. The high aquifer-scale proportions for organic constituents with HBBs were less than 1% in the Southern, Middle, and Northern Sacramento Valley study units. Organic constituents were detected at moderate relative-concentrations in about 3% of the Southern and Middle Sacramento Valley study units and in 1% of the Northern Sacramento Valley study unit. Of the 227 organic constituents analyzed for, 86 were detected, and of those detected, 56 have HBBs. Six organic constituents (atrazine, bentazon, chloroform, simazine, tetrachloroethene, and trichloroethene) were detected in 10% or more of the sampled wells in one or more of the three Sacramento Valley study units.

California↗

The geologic story of the Great Plains

The Great Plains! The words alone create a sense of space and a feeling of destiny a challenge. But what exactly is this special part of Western America that contains so much of our history? How did it come to be? Why is it different? Geographically, the Great Plains is an immense sweep of country; it reaches from Mexico far north into Canada and spreads out east of the Rocky Mountains like a huge welcome mat. So often maligned as a drab, featureless area, the Great Plains is in fact a land of marked contrasts and limitless variety: canyons carved into solid rock of an arid land by the waters of the Pecos and the Rio Grande; the seemingly endless grainfields of Kansas; the desolation of the Badlands; the beauty of the Black Hills. Before it was broken by the plow, most of the Great Plains from the Texas panhandle northward was treeless grassland. Trees grew only along the floodplains of streams and on the few mountain masses of the northern Great Plains. These lush prairies once were the grazing ground for immense herds of bison, and the land provided a bountiful life for those Indians who followed the herds. South of the grasslands, in Texas, shrubs mixed with the grasses: creosote bush along the valley of the Pecos River; mesquite, oak, and juniper to the east. The general lack of trees suggests that this is a land of little moisture, as indeed it is. Nearly all of the Great Plains receives less than 24 inches of rainfall a year, and most of it receives less than 16 inches. This dryness and the strength of sunshine in this area, which lies mostly between 2,000 and 6,000 feet above sea level, create the semiarid environment that typifies the Great Plains. But it was not always so. When the last continental glacier stood near its maximum extent, some 12,000-14,000 years ago, spruce forest reached southward as far as Kansas, and the Great Plains farther south was covered by deciduous forest. The trees retreated northward as the ice front receded, and the Great Plains has been a treeless grassland for the last 8,000-10,000 years. For more than half a century after Lewis and Clark crossed the country in 1805-6, the Great Plains was the testing ground of frontier America here America grew to maturity (fig. 1). In 1805-7, explorer Zebulon Pike crossed the southcentral Great Plains, following the Arkansas River from near Great Bend, Kans., to the Rocky Mountains. In later years, Santa Fe traders, lured by the wealth of New Mexican trade, followed Pike's path as far as Bents Fort, Colo., where they turned southwestward away from the river route. Those pioneers who later crossed the plains on the Oregon Trail reached the Platte River near the place that would become Kearney, Nebr., by a nearly direct route from Independence, Mo., and followed the Platte across the central part of the Great Plains.

Bulletin↗

Molt and aging criteria for four North American grassland passerines

Prairie and grassland habitats in central and western North America have declined substantially since settlement by Europeans (Knopf 1994) and many of the birds and other organisms that inhabit North American grasslands have experienced steep declines (Peterjohn and Sauer 1999; Johnson and Igl 1997; Sauer, Hines, and Fallon 2007). The species addressed here, Sprague’s Pipit (Anthus spragueii), Grasshopper (Ammodramus savannarum) and Baird’s (A. bairdii) sparrows, and Chestnut-collared Longspurs (Calcarius ornatus), are grassland birds that are of special conservation concern throughout their ranges due to declining populations and the loss of the specific grassland habitats required on both their breeding and wintering ranges (Knopf 1994, Davis and Sealy 1998, Davis 2003, Davis 2004, Jones and Dieni 2007). Population-trend data on grassland birds, while clearly showing declines, provides no information on the causes of population declines. Without demographic information (i.e., productivity and survivorship), there are no means to determine when in their life cycle the problems that are creating these declines are occurring, or to determine to what extent population trends are driven by factors that affect birth rates, death rates, or both (DeSante 1995). For migratory birds, population declines may be driven by factors on breeding grounds, during migration, and/or on wintering grounds. Lack of data on productivity and survivorship thus impedes the formulation of effective management and conservation strategies to reverse population declines (DeSante 1992). Furthermore, if deficiencies in survivorship are revealed, management strategies may need to address habitats on both breeding and non-breeding grounds, as well as along migratory pathways. One technique that helps inform management strategies is the biochemical analysis of isotopes and genetic markers, from the sampling of individual feathers from live birds (Smith et al. 2003, Pérez and Hobson 2006; Appendix). Determining demographic parameters and effectively sampling feathers to reveal connectivity between breeding and wintering grounds requires detailed knowledge of molt patterns and age determination criteria for the target species, in the hand. For example, productivity, survivorship, and territory acquisition may all be age-dependent, with first-year birds showing different patterns and responses than older birds. In many cases it may be possible to sample both a feather grown on the breeding grounds and one grown on the wintering grounds from a single individual, but knowledge of age-specific molt patterns, as well as an ability to recognize different feather generations, is needed to accomplish such a task. While some information on molt and aging criteria exists for grassland passerine species (Pyle 1997a), these species have been rarely captured during mark-recapture studies (Jones et al. 2007) and this information thus needs refining. There is a need for additional resources to assist field workers in determining molt patterns and age in captured individuals. Our objective is to describe molt and aging criteria for four grassland passerine species with the aid of digital photographs taken in the field. We hope that this document will be useful for researchers studying grassland species through capture and banding of live individuals on either the breeding or the wintering grounds. We present a general section on molt and aging techniques, followed by specific accounts for the four species treated: Sprague’s Pipits, Grasshopper and Baird sparrows, and Chestnut-collared Longspur. We also provide a brief protocol on collecting feather samples (Appendix).

Biological Technical Publication↗

Groundwater quality data for the northern Sacramento Valley, 2007: Results from the California GAMA Program

Groundwater quality in the approximately 1,180-square-mile Northern Sacramento Valley study unit (REDSAC) was investigated in October 2007 through January 2008 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project was developed in response to the Groundwater Quality Monitoring Act of 2001, and is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB). The study was designed to provide a spatially unbiased assessment of the quality of raw groundwater used for public water supplies within REDSAC and to facilitate statistically consistent comparisons of groundwater quality throughout California. Samples were collected from 66 wells in Shasta and Tehama Counties. Forty-three of the wells were selected using a spatially distributed, randomized grid-based method to provide statistical representation of the study area (grid wells), and 23 were selected to aid in evaluation of specific water-quality issues (understanding wells). The groundwater samples were analyzed for a large number of synthetic organic constituents (volatile organic compounds [VOC], pesticides and pesticide degradates, and pharmaceutical compounds), constituents of special interest (perchlorate and N-nitrosodimethylamine [NDMA]), naturally occurring inorganic constituents (nutrients, major and minor ions, and trace elements), radioactive constituents, and microbial constituents. Naturally occurring isotopes (tritium, and carbon-14, and stable isotopes of nitrogen and oxygen in nitrate, stable isotopes of hydrogen and oxygen of water), and dissolved noble gases also were measured to help identify the sources and ages of the sampled ground water. In total, over 275 constituents and field water-quality indicators were investigated. Three types of quality-control samples (blanks, replicates, and sampmatrix spikes) were collected at approximately 8 to 11 percent of the wells, and the results for these samples were used to evaluate the quality of the data obtained from the groundwater samples. Field blanks rarely contained detectable concentrations of any constituent, suggesting that contamination was not a noticeable source of bias in the data for the groundwater samples. Differences between replicate samples were within acceptable ranges for nearly all compounds, indicating acceptably low variability. Matrix-spike recoveries were within acceptable ranges for most compounds. This study did not attempt to evaluate the quality of water delivered to consumers; after withdrawal from the ground, raw groundwater typically is treated, disinfected, or blended with other waters to maintain water quality. Regulatory thresholds apply to water that is served to the consumer, not to raw ground water. However, to provide some context for the results, concentrations of constituents measured in the raw groundwater were compared with regulatory and nonregulatory health-based thresholds established by the U.S. Environmental Protection Agency (USEPA) and California Department of Public Health (CDPH) and with aesthetic and technical thresholds established by CDPH. Comparisons between data collected for this study and drinking-water thresholds are for illustrative purposes only and do not indicate compliance or noncompliance with those thresholds. The concentrations of most constituents detected in groundwater samples from REDSAC were below drinking-water thresholds. Volatile organic compounds (VOC) and pesticides were detected in less than one-quarter of the samples and were generally less than a hundredth of any health-based thresholds. NDMA was detected in one grid well above the NL-CA. Concentrations of all nutrients and trace elements in samples from REDSAC wells were below the health-based thresholds except those of arsenic in three samples, which were above the USEPA maximum contaminant level (MCL-US). However, none of these wells were public-supply wells. Concentrations of all radioactive constituents were below health-based thresholds except radon-222, which was detected above the proposed MCL-US of 300 pCi/L in samples from 11 grid wells. Most of the samples from REDSAC wells had concentrations of major elements, total dissolved solids, and trace elements below the non-enforceable thresholds set for aesthetic or technical concerns. A few samples contained iron, manganese, or pH at levels above the SMCL-CA or SMCL-US thresholds.

California↗

Annotated bibliography of economic literature on wetlands

This bibliography is intended for the use of wetlands scientists, policy analysts, and natural resource professionals who have little acquaintance with natural resource economics, and natural resource professionals who have some background in economic analysis and wish to sharpen their appreciation of the specialized methods used to value the nonmarket uses of wetland resources. It is not intended to serve as a first primer of natural resource economics. The purpose of including this discussion is to introduce the reader to the fact that specialized language and analytic techniques are used in this field, and that summary discussion of these techniques are not available in introductory or intermediate level economics textbooks. A key difficulty in economic analysis lies in the need that economists have to express common-sense terms such as "demand" or "supply" in a precise way; this facilitates the interpretation of data and is a powerful aid in making internally consistent, policy analysis. Natural resource economists would like to find a consistent, intuitively plausible measure of the social benefits conferred by some good or service. The most common fallacy noneconomists make in this field is to use expenditures as a measure of well-being or benefits. This measure is defective; expenditures may rise, while benefits fall. The following simple example should clarify the issue. Suppose that a certain population center, in the 1940's, is located 5 miles from a riverine recreation site. Suppose that a factory opens up 15 miles away from the site during the 1950's, and closes at the end of the 1960's; and that during this 20-year period, the bulk of this region's populace resides 15 miles from the site, close to the factory. In the 1970's, the populace of the region returns to the old population center, 5 miles from the recreation site. The benefits conferred by the site diminished during the 1950's and 1960's, even though travel (and even total) expenditures associated with the use of the site may have risen during this period. Both intuition and formal analysis suggest that accurate estimates of benefits conferred by a good or service provide quantitative indices of the availability of good substitutes for the good or service in question., The fewer low-priced substitutes, the greater the benefits conferred by the good. The prices (quantities) of available substitutes may be needed to specify empirically estimated demand (supply) curves. If so, omission of these variables will produce biased estimates of net benefits conferred if the approach used to estimate social benefits is based on the shape and position of an empirically estimated demand (supply) curve. In general, a good grasp of the meaning of both demand and supply (curves) is needed to produce sound estimates of benefits conferred by some commodity. Demand and supply curves are discussed in the following section that deals with various techniques for estimating benefits conferred by outdoor recreation sites. With wetlands functions and resources, the divergence between large total values and very low (zero) marginal values lies behind much of the controversy as to the appropriate procedure for imputing values to wetlands preservation benefits. If some type of wetland habitat is not a limiting factor in the production of some target wildlife species, the marginal value product of that habitat type is zero. The total social marginal product of the wetlands habitat type or complex may be very large, but if the removal of the last unit does not diminish total output, reallocating the land to more valuable economic activities increases social welfare.

Report↗

The Yellowstone hotspot, Greater Yellowstone ecosystem, and human geography

Active geologic processes associated with the Yellowstone hotspot are fundamental in shaping the landscapes of the greater Yellowstone ecosystem (GYE), a high volcanic plateau flanked by a crescent of still higher mountainous terrain. The processes associated with the Yellowstone hotspot are volcanism, faulting, and uplift and are observed in the geology at the surface. We attribute the driving forces responsible for the northeastward progression of these processes to a thermal plume rising through the Earth’s mantle into the base of the southwest-moving North American plate. This progression began 16 million years ago (Ma) near the Nevada-Oregon border and arrived at Yellowstone about 2 Ma. Before arrival of the hotspot, an older landscape existed, particularly mountains created during the Laramide orogeny about 70–50 Ma and volcanic terrain formed by Absaroka andesitic volcanism mostly between 50–45 Ma. These landscapes were more muted than the present, hotspot-modified landscape because the Laramide-age mountains had worn down and an erosion surface of low relief had developed on the Absaroka volcanic terrain. The Yellowstone Plateau was built by hotspot volcanism of rhyolitic lavas and caldera-forming rhyolite tuffs (ignimbrites). Streams eroding back into the edges of this plateau have created scenic waterfalls and canyons such as the Grand Canyon of the Yellowstone and Lewis Canyon. Rhyolite is poor in plant nutrients and forms sandy, well-drained soils that support the monotonous, fire-adapted lodgepole pine forests of the Yellowstone Plateau. Non-rhyolitic rocks surround this plateau and sustain more varied vegetation, including spruce, fir, and whitebark pine forests broken by grassy meadows. Heat from the hotspot rises upward and drives Yellowstone’s famed geysers, hot springs, and mudpots. These thermal waters are home to specialized, primitive ecosystems, rich in algae and bacteria. The rock alteration associated with hydrothermal systems creates the bright colors of Yellowstone’s Grand Canyon. Basin-and-range-style faulting has accompanied migration of the hotspot to Yellowstone and formed the linear mountains and valleys that occur north and south of the hotspot track, which is the present-day eastern Snake River Plain. High rates of basin-and-range faulting occurred adjacent to the migrating Yellowstone hotspot, creating distinctive landscapes within the GYE such as the Teton Range/Jackson Hole, with characteristic rugged, forested ranges and adjacent flat-floored grassy valleys. The difference in altitude between the mountains and valleys provides a topographic gradient in which vegetation maturation advances with altitude; animal-migration patterns also follow this trend. The valleys provide natural meadows, agricultural land, town sites, and corridors for roads. Uplift of the GYE by as much as 1 km (3,000 ft) during the last 5 million years has resulted in ongoing erosion of deep, steep-walled valleys. Many prominent ecological characteristics of Yellowstone derive from this hotspot-induced uplift, including the moderate- to high- altitude terrain and associated cool temperatures and deep snowfall. Modern and Pleistocene climate and associated vegetation patterns strongly relate to the topography created by the hotspot and its track along the eastern Snake River Plain. Winter air masses from the moist northern Pacific Ocean traverse the topographic low of the Snake River Plain to where orographic rise onto the Yellowstone Plateau and adjacent mountains produces deep snow. A winter precipitation shadow forms on the lee (eastern) sides of the GYE. During Pleistocene glacial times, this moisture conduit provided by the hotspot-track-produced ice-age glaciers that covered the core of the present GYE. These glaciers sculpted bedrock and produced glacial moraines that are both forested and unforested, sand and gravel of ice-marginal streams and outwash gravels that are commonly covered with sagebrush-grassland, and silty lake sediments that are commonly covered by lush grassland such as Hayden Valley. The effects of the Yellowstone hotspot also profoundly shaped the human history in the GYE. Uplift associated with the hotspot elevates the GYE to form the Continental Divide, and streams drain radially outward like spokes from a hub. Inhabitants of the GYE 12,000–10,000 years ago, as well as more recent inhabitants, followed the seasonal green-up of plants and migrating animals up into the mountain areas. During European immigration, people settled around Yellowstone in the lower parts of the drainages and established roads, irrigation systems, and cultural associations. The core Yellowstone highland is too harsh for agriculture and inhospitable to people in the winter. Beyond this core, urban and rural communities exist in valleys and are separated by upland areas. The partitioning inhibits any physical connection of communities, which in turn complicates pursuit of common interests across the whole GYE. Settlements thus geographically isolated evolved as diverse, independent communities

Idaho, Montana, Utah, Wyoming↗

Application of FTLOADDS to Simulate Flow, Salinity, and Surface-Water Stage in the Southern Everglades, Florida

The Comprehensive Everglades Restoration Plan requires numerical modeling to achieve a sufficient understanding of coastal freshwater flows, nutrient sources, and the evaluation of management alternatives to restore the ecosystem of southern Florida. Numerical models include a regional water-management model to represent restoration changes to the hydrology of southern Florida and a hydrodynamic model to represent the southern and western offshore waters. The coastal interface between these two systems, however, has complex surface-water/ground-water and freshwater/saltwater interactions and requires a specialized modeling effort. The Flow and Transport in a Linked Overland/Aquifer Density Dependent System (FTLOADDS) code was developed to represent connected surface- and ground-water systems with variable-density flow. The first use of FTLOADDS is the Southern Inland and Coastal Systems (SICS) application to the southeastern part of the Everglades/Florida Bay coastal region. The need to (1) expand the domain of the numerical modeling into most of Everglades National Park and the western coastal area, and (2) better represent the effect of water-delivery control structures, led to the application of the FTLOADDS code to the Tides and Inflows in the Mangroves of the Everglades (TIME) domain. This application allows the model to address a broader range of hydrologic issues and incorporate new code modifications. The surface-water hydrology is of primary interest to water managers, and is the main focus of this study. The coupling to ground water, however, was necessary to accurately represent leakage exchange between the surface water and ground water, which transfers substantial volumes of water and salt. Initial calibration and analysis of the TIME application produced simulated results that compare well statistically with field-measured values. A comparison of TIME simulation results to previous SICS results shows improved capabilities, particularly in the representation of coastal flows. This improvement most likely is due to a more stable numerical representation of the coastal creek outlets. Sensitivity analyses were performed by varying frictional resistance, leakage, barriers to flow, and topography. Changing frictional resistance values in inland areas was shown to improve water-level representation locally, but to have a negligible effect on area-wide values. These changes have only local effects and are not physically based (as are the unchanged values), and thus have limited validity. Sensitivity tests indicate that the overall accuracy of the simulation is diminished if leakage between surface water and ground water is not simulated. The inclusion of a major road as a complete barrier to surface-water flow influenced the local distribution and timing of flow; however, the changes in total flow and individual creekflows were negligible. The model land-surface altitude was lowered by 0.1 meter to determine the sensitivity to topographic variation. This topographic sensitivity test produced mixed results in matching field data. Overall, the representation of stage did not improve definitively. A final calibration utilized the results of the sensitivity analysis to refine the TIME application. To accomplish this calibration, the friction coefficient was reduced at the northern boundary inflow and increased in the southwestern corner of the model, the evapotranspiration function was varied, additional data were used for the ground-water head boundary along the southeast, and the frictional resistance of the primary coastal creek outlet was increased. The calibration improved the match between measured and simulated total flows to Florida Bay and coastal salinities. Agreement also was improved at most of the water-level sites throughout the model domain.

Scientific Investigations Report↗

Ground-water quality data in the Southern Sacramento Valley, California, 2005 — Results from the California GAMA Program

Ground-water quality in the approximately 2,100 square-mile Southern Sacramento Valley study unit (SSACV) was investigated from March to June 2005 as part of the Statewide Basin Assessment Project of Ground-Water Ambient Monitoring and Assessment (GAMA) Program. This study was designed to provide a spatially unbiased assessment of raw ground-water quality within SSACV, as well as a statistically consistent basis for comparing water quality throughout California. Samples were collected from 83 wells in Placer, Sacramento, Solano, Sutter, and Yolo Counties. Sixty-seven of the wells were selected using a randomized grid-based method to provide statistical representation of the study area. Sixteen of the wells were sampled to evaluate changes in water chemistry along ground-water flow paths. Four additional samples were collected at one of the wells to evaluate water-quality changes with depth. The GAMA Statewide Basin Assessment project was developed in response to the Ground-Water Quality Monitoring Act of 2001 and is being conducted by the California State Water Resources Control Board (SWRCB) in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory (LLNL). The ground-water samples were analyzed for a large number of man-made organic constituents (volatile organic compounds [VOCs], pesticides and pesticide degradates, pharmaceutical compounds, and wastewater-indicator constituents), constituents of special interest (perchlorate, N -nitrosodimethylamine [NDMA], and 1,2,3-trichloropropane [1,2,3-TCP]), naturally occurring inorganic constituents (nutrients, major and minor ions, and trace elements), radioactive constituents, and microbial indicators. Naturally occurring isotopes (tritium, and carbon-14, and stable isotopes of hydrogen, oxygen, and carbon), and dissolved noble gases also were measured to help identify the source and age of the sampled ground water. Quality-control samples (blanks, replicates, matrix spikes) were collected at ten percent of the wells, and the results for these samples were used to evaluate the quality of the data for the ground-water samples. Assessment of the quality-control data resulted in censoring of less than 0.03 percent of the analyses of ground-water samples. This study did not evaluate the quality of water delivered to consumers; after withdrawal from the ground, water typically is treated, disinfected, and (or) blended with other waters to maintain acceptable water quality. Regulatory thresholds apply to treated water that is served to the consumer, not to raw ground water. However, to provide some context for the results, concentrations of constituents measured in the raw ground water were compared with health-based thresholds established by the U.S. Environmental Protection Agency (USEPA) and California Department of Health Services (CADHS) (Maximum Contaminant Levels [MCLs], notification levels [NLs], or lifetime health advisories [HA-Ls]) and thresholds established for aesthetic concerns (Secondary Maximum Contaminant Levels [SMCLs]). All wells were sampled for organic constituents and selected general water quality parameters; subsets of wells were sampled for inorganic constituents, nutrients, and radioactive constituents. Volatile organic compounds were detected in 49 out of 83 wells sampled and pesticides were detected in 34 out of 82 wells; all detections were below health-based thresholds, with the exception of 1 detection of 1,2,3-trichloropropane above a NL. Of the 43 wells sampled for trace elements, 27 had no detections of a trace element above a health-based threshold and 16 had at least one detection above. Of the 18 trace elements with health-based thresholds, 3 (arsenic, barium, and boron) were detected at concentrations higher an MCL. Of the 43 wells sampled for nitrate, only 1 well had a detection above the MCL. Twenty wells were sampled for radioactive constituents; only 1 (radon-222) was measured at activities higher than the proposed MCL. Radon-222 was detected below the threshold in 7 wells and above the threshold in 13 wells. SMCLs have been established for nine constituents or parameters analyzed in SSACV. Six were measured at levels higher than an SMCL: chloride, iron, manganese, pH, specific conductance, and total dissolved solids. Chloride, iron, manganese, pH, and total dissolved solids were measured in 43 wells: 27 wells had no measurements above a threshold and 16 wells had a measurement above a threshold. Specific conductance was measured in 83 wells. In 68 wells, specific conductance was measured lower than the threshold and in 15 wells it was measured above the threshold.

California↗

Groundwater quality data for the Tahoe-Martis study unit, 2007: Results from the California GAMA Program

Groundwater quality in the approximately 460-square-mile Tahoe–Martis study unit was investigated in June through September 2007 as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA Priority Basin Project was developed in response to the Groundwater Quality Monitoring Act of 2001 and is being conducted by the U.S. Geological Survey (USGS) in cooperation with the California State Water Resources Control Board (SWRCB). The study was designed to provide a spatially unbiased assessment of the quality of raw groundwater used for public water supplies within the Tahoe–Martis study unit (Tahoe–Martis) and to facilitate statistically consistent comparisons of groundwater quality throughout California. Samples were collected from 52 wells in El Dorado, Placer, and Nevada Counties. Forty-one of the wells were selected using a spatially distributed, randomized grid-based method to provide statistical representation of the study area (grid wells), and 11 were selected to aid in evaluation of specific water-quality issues (understanding wells). The groundwater samples were analyzed for a large number of synthetic organic constituents (volatile organic compounds [VOC], pesticides and pesticide degradates, and pharmaceutical compounds), constituents of special interest (perchlorate and N -nitrosodimethylamine [NDMA]), naturally occurring inorganic constituents (nutrients, major and minor ions, and trace elements), radioactive constituents, and microbial indicators. Naturally occurring isotopes (tritium, carbon-14, strontium isotope ratio, and stable isotopes of hydrogen and oxygen of water), and dissolved noble gases also were measured to help identify the sources and ages of the sampled groundwater. In total, 240 constituents and water-quality indicators were investigated. Three types of quality-control samples (blanks, replicates, and samples for matrix spikes) each were collected at 12 percent of the wells, and the results obtained from these samples were used to evaluate the quality of the data for the groundwater samples. Field blanks rarely contained detectable concentrations of any constituent, suggesting that data for the groundwater samples were not compromised by possible contamination during sample collection, handling or analysis. Differences between replicate samples were within acceptable ranges. Matrix spike recoveries were within acceptable ranges for most compounds. This study did not attempt to evaluate the quality of water delivered to consumers; after withdrawal from the ground, raw water typically is treated, disinfected, or blended with other waters to maintain water quality. Regulatory thresholds apply to water that is served to the consumer, not to raw groundwater. However, to provide some context for the results, concentrations of constituents measured in the raw groundwater were compared with regulatory and nonregulatory health-based thresholds established by the U.S. Environmental Protection Agency (USEPA) and the California Department of Public Health (CDPH), and with aesthetic and technical thresholds established by CDPH. Comparisons between data collected for this study and drinking-water thresholds are for illustrative purposes only and do not indicate of compliance or noncompliance with regulatory thresholds. The concentrations of most constituents detected in groundwater samples from the Tahoe–Martis wells were below drinking-water thresholds. Organic compounds (VOCs and pesticides) were detected in about 40 percent of the samples from grid wells, and most concentrations were less than 1/100th of regulatory and nonregulatory health-based thresholds, although the conentration of perchloroethene in one sample was above the USEPA maximum contaminant level (MCL-US). Concentrations of all trace elements and nutrients in samples from grid wells were below regulatory and nonregulatory health-based thresholds, with five exceptions. Concentrations of arsenic were above the MCL-US in 20 percent of the samples from grid wells. Gross alpha particle activity (MCL-US), boron (CDPH notification level, NL-CA), and molybdenum (USEPA lifetime health advisory, HAL-US) were each detected above thresholds in two of the samples from grid wells, and radon (proposed alternative MCL-US) was detected above the threshold in one sample from a grid well. Most of the samples from Tahoe–Martis grid wells had concentrations of major elements, total dissolved solids, and trace elements below the CDPH secondary maximum contaminant levels, nonenforceable thresholds set for aesthetic and technical concerns. Fifteen percent of the samples from grid wells contained iron, manganese, or total dissolved solids at concentrations above these levels.

California, Nevada↗

Ground deformation and gravity for volcano monitoring

Introduction When magma accumulates or migrates, it can cause pressurization and related ground deformation. Characterization of surface deformation provides important constraints on the potential for future volcanic activity, especially in combination with seismic activity, gas emissions, and other indicators. A wide variety of techniques and instrument types have been applied to the study of ground deformation at volcanoes (sidebar, p. 2; Dzurisin, 2000, 2003, 2007). Geodetic instruments include continuously recording Global Navigation Satellite System (GNSS; of which the United States’ Global Positioning System is one example) stations (fig. D1), borehole tiltmeters, and interferometric synthetic aperture radar (InSAR) measurements (from satellites, occupied and unoccupied aircraft systems, and ground-based sensors). Additional geodetic measurements like continuous- and survey-mode gravity (fig. D2) can contribute substantially to interpreting these data. Borehole strainmeters (see chapter K , this volume, by Hurwitz and Lowenstern, 2024) also have outstanding utility for monitoring deformation, although because of cost and permitting challenges, we do not include them as part of standard volcano monitoring networks for U.S. volcanoes. Still other techniques like light detection and ranging (lidar), structure from motion, and optical satellite data can be used to derive gross topographic changes, which can be used to map volcanic deposits, infer eruption rates, and gain insights into the source processes associated with eruptive activity (see chapter G , this volume, on tracking surface changes caused by volcanic activity; Orr and others, 2024). Experience has shown that no single geodetic monitoring technique is adequate to detect and track the entire range of ground-motion patterns that occur at volcanoes, primarily because of the temporal and spatial diversity of volcano deformation (fig. D3). Similarly, the magnitude of surface deformation varies widely. Geodetic monitoring strategies should therefore include multiple techniques and instrument types to cover a wide range of spatial and temporal scales. In identifying recommendations for geodetic instrumentation for volcano monitoring networks, we attempted to maximize the diversity of instrument types to measure the full range of deformation signals and minimize their expense and number; thus, we do not include several well-known deformation-monitoring techniques in our recommendations. Extensometers, for example, measure strains over distances of a few meters and have an excellent record of success in detecting changes in preeruptive localized ground motion across existing cracks, including at Mount St. Helens, Washington (Iwatsubo and others, 1992), and Piton de la Fournaise, Réunion Island (Peltier and others, 2006). Despite being relatively inexpensive, extensometers are best used primarily when localized ground displacements (for example, ground cracks) need to be tracked, and are not necessary at all volcanoes. In considering volcano deformation monitoring strategies, two complicating factors are deserving of special attention. First, not all deformation is driven by subsurface magmatic activity—for example, at many large stratovolcanoes (for example, Mount Rainier), flank collapses and landslides are significant geologic hazards (Reid and others, 2001) that may occur even in the absence of magmatic activity. Monitoring the stability of volcanoes is thus another critical application of geodetic monitoring networks to inform hazard assessment. One of the most famous examples of edifice instability is the large flank collapse that initiated the May 18, 1980, eruption of Mount St. Helens. Deformation monitoring had detected a bulge on the north flank of the mountain in April 1980 that was expanding by several meters per day (Lipman and others, 1981). Given that flank collapses can happen at any time during a period of volcanic unrest (or even outside a period of unrest), the capability to assess edifice stability is critical. Second, although volcanoes are commonly treated as idealized structures that erupt from single points, like centralvent stratovolcanoes, many are characterized by long rift zones from which eruptions may originate, and distributed volcanic fields are characterized by broadly spaced vents. For example, linear dikes are common at Kīlauea, Mauna Loa, and between Mount Shasta and Medicine Lake in California. At Kīlauea, one of these linear dikes emerged more than 40 kilometers (km) away from the summit of the volcano during the lower East Rift Zone eruption in 2018. Other volcanic fields, like Lassen volcanic center, California, or the San Francisco Volcanic Field, Arizona, have many small vents spread over a wide area. Although the instrumentation guidelines presented in this chapter remain phrased for central-vent volcanoes, they should be modified as needed in the context of the eruptive characteristics of each individual volcanic system. Spatial analysis of geodetic network coverage could help to ensure adequate instrumentation in areas where volcanism can occur over a broad area as opposed to a central vent. As an example, consider the adjacent volcanoes Mount Shasta and Medicine Lake. If station locations are chosen based only on the distance from the centers of the volcanoes, then any geodetic anomalies between the two volcanoes—an area of potential volcanism as indicated by the presence of volcanic features—may remain undetected by ground-based instrumentation. The spatial analysis is accomplished via a grid of pressure point sources (Mogi, 1958) evenly distributed across the map area, at a depth of 5 km in this example (fig. D4). Each source is inflated until predicted deformations exceed the GNSS white noise uncertainty estimates at one site (Langbein, 2017; Murray and Svarc, 2017). This volume of detectable magma provides a measure of the quality of the coverage (fig. D4). The results indicate that, as of 2022, there is a large area between Mount Shasta and Medicine Lake volcano with existing mapped dikes in which a substantial amount of magma could intrude without being detected geodetically. Applying this style of analysis to individual volcanic systems can provide a guide for designing network geometry given the expected locations of future eruptions.

Scientific Investigations Report↗

Direct temperature measurements of deposits, Mount St. Helens, Washington, 1980-1981

A program of temperature studies of the eruptive products of Mount St. Helens was established May 20, 1980, 2 days after the catastrophic eruption of May 18. Temperature-depth profiles were measured by thermocouple to determine the emplacement temperatures of deposits of the debris avalanche and blast of May 18 and of deposits of the pyroclastic flows of May 18, May 25, June 12, July 22, August 7, and October 17, 1980. At some of the localities where deposits had cooled appreciably before measurement, emplacement temperatures were recovered mathematically from data gathered from observations of the cooling histories of the deposits. In addition, methodologies and specialized temperature-measuring equipment were developed to maximize efficiency in data collection and to minimize risk to personnel. In general, the more recent eruptive deposits were emplaced at higher temperatures than the earlier ones. Emplacement temperatures of deposits of the debris avalanche ranged from about 70 to 100°C. Temperatures of deposits of the blast ranged from about 100 to 325°C and varied with the azimuth of the measurement site from the vent; the higher temperatures were measured in the northeast sector. Emplacement temperatures of the later pumiceous pyroclastic-flow deposits ranged from about 300 to 680°C, and temperatures in nearvent facies were about 750 to 850°C. The most important features shown by the data obtained from the deposits produced by the blast are (1) their generally lower temperature relative to deposits emplaced by the subsequent pumiceous pyroclastic flows, attributed to relatively low temperatures of the cryptodome and admixing of significant amounts of accidental material and air; (2) an azimuthal variation of emplacement temperatures, hotter toward the east, attributed to thermal inhomogeneities in the source material and differential cooling associated with differing grain sizes and terrains over which the blast traveled; (3) emplacement temperatures that exhibited little change with distance from the vent to distances as great as 20 km, attributed to little cooling along the path, preferential elutriation of the cooler, finer particles, preferential interaction between air and the blast material at the head of the flow, and production of heat during the flow, possibly by friction; (4) thermal stratigraphy observed in some of the ponded pyroclastic-flow deposits in major valleys, attributed in part to a grain-size effect (finer upward) and in part to longer residence of the younger deposits as veneer deposits on the adjacent ridges before their secondary mobilization into the valleys; and (5) temperatures in the veneer deposits and moving blast cloud that were possibly higher than emplacement temperatures of the ponded pyroclastic-flow deposits. The most important features shown by the data obtained from the postblast, pumiceous pyroclastic-flow deposits are (1) generally hotter deposits in the later eruptions than in the earlier ones, attributed to less admixing of the pyroclastic material with air because of the observed progressive decrease in vigor of the successive eruptions; (2) little heat loss (100-200°C) of near-vent material during eruption, as predicted by simple adiabatic expansion; (3) little downflow cooling in the deposits after the first several hundred meters of travel, attributed to the same factors proposed for the blast deposits; (4) multiple flow units that were emplaced at different temperatures by most of the eruptions, attributed to differential cooling through differing amounts of admixed air in accordance with the vigor of the individual eruptive pulses; and (5) cooler material in the ash-cloud deposits than in the source pyroclastic flows because of more effective cooling of the elutriated finer material by the admixed air. Descriptions of the materials and methods we used, and the tabular data and temperature-depth profiles that support our findings, are included as appendices.

Professional Paper↗

Water resources of southeastern Florida, with special reference to the geology and ground water of the Miami area

The circulation of water, in any form, from the surface of the earth to the atmosphere and back again is called the hydrologic cycle. A comprehensive study of the water resources of any area must, therefore, include data on the climate of the area. The humid subtropical climate of southeastern Florida is characterized by relatively high temperatures, alternating semi-annual wet and dry seasons, and usually light but persistent winds. The recurrence of drought in an area having relatively large rainfall such as southeastern Florida indicates that the agencies that remove water are especially effective. Two of the most important of the agencies associated with climate are evaporation and transpiration, or "evapotranspiration". Evaporation losses from permanent water areas are believed to average between about 40 and 45 inches per year. Over land areas indirect methods must be used to determine losses by evapotranspiration; necessarily, these values are not precise. Because of their importance in the occurrence and movement of both surface and ground waters, detailed studies were made of the geology and geomorphology of southern Florida. As a result of widespread crustal movements, southern Florida emerged from the sea in late Pliocene time and probably was slightly tilted to the west. At the beginning of the Pleistocene the continent emerged still farther as a result of the lowering of sea level attending the first widespread glaciation. During this epoch, southern Florida may have stood several hundred feet above sea level. During the interglacial ages the sea repeatedly flooded southern Florida. The marine members of the Fort Thompson formation in the Lake Okeechobee-Everglades depression and the Caloosahatchee River Valley apparently are the deposits of these interglacial invasions by the sea. The fresh-water marls, sands, and organic deposits of the Fort Thompson formation appear to have accumulated during glacial ages when sea level was low and the area was a land surface partly occupied by fresh-water lakes and marshes. Elsewhere in southern Florida the deposits are mainly marine limestones and sandy terrace deposits. The Pliocene surface upon which these Pleistocene sediments were deposited was highest to the north and west of the present Everglades and Kissimmee River basin, and it sloped gently to the south, southeast, and east. On this slightly sloping floor, alternately submerged and emerged, the later materials were built; these materials modified by wind, rain, and surface and ground waters, have largely determined the present topographic and ecologic character of southern Florida. The most important aquifer in southern Florida, and the one in which most of the wells are developed, is the Biscayne aquifer. It is composed of parts of the Tamiami formation (Miocene), Caloosahatchee marl (Pliocene), Fort Thompson formation, Anastasia formation, Key Largo limestone, Miami oolite, and Pamlico sand (Pleistocene). In some parts of southern Florida, the Pamlico sand and the Anastasia formation are not a part of the Biscayne aquifer; however, they are utilized in the development of small water supplies. Most of the Caloosahatchee marl and the Fort Thompson formation in the Lake Okeechobee area is of very low permeability. In the northern Everglades their less permeable parts contain highly mineralized waters, which appear to have been trapped since the invasions by the Pleistocene seas. These waters have been modified by dilution with fresh ground water and by chemical reactions with surrounding materials. Sea-level fluctuations, starting at the close of the Pliocene with the highest levels and progressing toward the Recent with successively lower levels, have built a series of nearly flat marine terrances abutting against one another much like a series of broad stearsteps. Erosion and solution have defaced and, in places, have obliterated the original surficial forms of these old sea bottoms, shores, and shoreline features, but their remnants today are widespread and, in some places, are easily recognizable.

Florida↗

Promoting synergy in the innovative use of environmental data—Workshop summary

From December 2 to 4, 2015, NatureServe and the U.S. Geological Survey organized and hosted a biodiversity and ecological informatics workshop at the U.S. Department of the Interior in Washington, D.C. The workshop objective was to identify user-driven future directions and areas of collaboration in advanced applications of environmental data applied to forecasting and decision making for the sustainability of biodiversity and ecosystem services. Substantial effort to recruit attendees from diverse Federal, State, and private sector organizations successfully attracted participants from 20 Federal agencies and 48 different institutions in the academic, nonprofit, State government, and commercial sectors; the total number of attendees ranged from 100 to 144 during the 3-day workshop. The first one-half of the workshop was divided into 7 plenary sessions and 3 sets of lightning talk sessions organized by sector, providing 48 oral and visual plenary presentations that shared diverse perspectives on biodiversity and ecological informatics, including original biospatial analyses from 6 graduate student map contest winners. The second one-half of the workshop focused on 10 breakout sessions with participant-driven themes from the environmental data sphere and concluded with an address by the Director of the U.S. Fish and Wildlife Service. The workshop was structured to encourage interactivity. About 80–90 percent of attendees provided direct feedback using clicker devices for specific questions related to biodiversity and ecological data uses and needs, and 10 breakout session leaders shared the highlights of their group discussions during the final workshop plenary sessions. Participants were encouraged to use the Twitter hashtag #ShareUrData. Over lunch on day 2 there were 20 simultaneous presentations of tools and apps during a special “Tools Café” session. The 10 participant-defined breakout session topics are listed below: Ecosystem services and ecological indicators Inventory and monitoring Biogeographic map of the Nation Pollinators Invasive species Remote sensing Drivers of agricultural change Citizen science Climate Hydrology and watersheds Numerous common themes that emerged from the workshop include the following: The vital importance of completing foundational environmental datasets that are nationally consistent and are essential to multiple sectors, such as the Soil Survey Geographic database high-resolution soils data, a minimum 5-meter resolution digital elevation model, national hydrographic data, high-resolution land cover data, time series high-resolution spatial climate data from historical to future time steps, and a national wetland inventory. Improved, nationally consistent environmental datasets (integrated with targeted observations) will dramatically advance forecasting capacity and support early warning systems (that is, drought, forest disease); however, multiagency coordination should focus on decision support tools that convey appropriate actions and responses to adapt to, and mitigate, potential negative consequences. Digitizing and providing access to the vast stores of underused historical data that can be leveraged for this purpose is of national importance. Modern computational techniques and the ever-increasing flow of environmental data from ground and remote observations can support improved understanding of environmental change. Success of understanding patterns of change for decision making requires establishing baselines from which change can be measured. The value of digitized historical data is greater than ever before. There is a need to recognize the multifaceted potential of citizen science to engage the public in resource stewardship, to create the next generation of science, technology, engineering, math, and environmental leaders, and to have sufficient field personnel to monitor environmental trends, including early detection of alien invasive species, phenological shifts, shifting distribution and abundance of indicator species, and species inventories. The Federal government has an essential role in creating the infrastructure to dramatically improve mobilization of citizen science (and other) data by fostering the following: creation of data standards, creation of nationally consistent framework datasets, vertical integration of observation data, visualization and dissemination of aggregated datasets, and calculation and communication of derived trends. Current and near future trends in the availability of remotely sensed data (rapid expansion of satellite fleets and drones) is revolutionizing access to near-real-time ecological data. Targeted integration with ground-based observations and instrumentation has an extremely valuable role in validating remotely sensed data, filling data gaps, improving data quality, and fully realizing the potential of the near-real-time monitoring of environmental indicator trends. Integrated management of environmental data at the landscape scale is required even as specific actions on the ground are largely local in nature. The workshop highlighted numerous success stories; however, almost every breakout group pointed out the still-too-fragmented nature of the current data landscape. Management and delivery of the necessary data, tools, and analyses to sustain our Nation’s environmental capital must be a collaborative effort between Federal, State, and local governments, academia, nonprofits, and the commercial sector, even though the responsibilities of each sector are different.

Open-File Report↗

Status and understanding of groundwater quality in the central-eastside San Joaquin Basin, 2006: California GAMA Priority Basin Project

Groundwater quality in the approximately 1,695-square-mile Central Eastside San Joaquin Basin (Central Eastside) study unit was investigated as part of the Priority Basin Project (PBP) of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The GAMA PBP was developed in response to the California Groundwater Quality Monitoring Act of 2001, and is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey and the Lawrence Livermore National Laboratory. The GAMA Central Eastside study unit was designed to provide a spatially unbiased assessment of untreated-groundwater quality, as well as a statistically consistent basis for comparing water quality throughout California. During March through June 2006, samples were collected from 78 wells in Stanislaus and Merced Counties, 58 of which were selected using a spatially distributed, randomized grid-based method to provide statistical representation of the study unit (grid wells), and 20 of which were sampled to evaluate changes in water chemistry along groundwater-flow paths (understanding wells). Water-quality data from the California Department of Public Health (CDPH) database also were used for the assessment. An assessment of the current status of the groundwater quality included collecting samples from wells for analysis of anthropogenic constituents such as volatile organic compounds (VOCs) and pesticides, as well as naturally occurring constituents such as major ions and trace elements. The assessment of status is intended to characterize the quality of untreated-groundwater resources within the primary aquifer system, not the treated drinking water delivered to consumers by water purveyors. The primary aquifer system (hereinafter, primary aquifer) is defined as that part of the aquifer corresponding to the perforation interval of wells listed in the CDPH database for the Central Eastside study unit. The quality of groundwater in shallower or deeper water-bearing zones may differ from that in the primary aquifer; shallower groundwater may be more vulnerable to surficial contamination. The primary aquifer is represented by the grid wells, of which 90 percent had depths to the tops of their perforations of about 80 to 330 feet and depths to bottom of about 100 to 670 feet. Relative-concentrations (sample concentration divided by benchmark concentration) were used as the primary metric for assessing the status of water quality for those constituents that have Federal and (or) California human health or aesthetic benchmarks. A relative-concentration greater than (>) 1.0 indicates a concentration above a benchmark, and less than or equal to (≤) 1.0 indicates a concentration equal to or below a benchmark. For organic and special interest constituents, relative-concentrations were classified as high (>1.0), moderate (≤1.0 and >0.1), or low (≤0.1). For inorganic constituents, relative-concentrations were classified as high (>1.0), moderate (≤1.0 and >0.5), or low (≤0.5). The threshold between low and moderate classifications was lower for organic and special interest constituents than for inorganic constituents because organic constituents generally are less prevalent and have smaller relative-concentrations than inorganic constituents. Grid-based and spatially-weighted approaches, the latter incorporating data from all CDPH wells, were used to evaluate the proportion of the primary aquifer (aquifer-scale proportions) with high, moderate, or low relative-concentrations. For individual constituents or classes of constituents, the aquifer-scale high proportion is the percentage of the area of the study unit having high relative-concentrations within the depth-zones of the primary aquifer. Aquifer-scale moderate and low proportions are defined similarly. Spatially-weighted aquifer-scale high proportions nearly always fell within the 90-percent confidence interval of grid-based aquifer-scale high proportions, indicating that the grid-based approach yielded statistically equivalent results to the spatially-weighted approach incorporating CDPH data. The status assessment for inorganic constituents showed that inorganic constituents (one or more) were high, relative to human-health benchmarks, in 18.0 percent of the primary aquifer, moderate in 44.0 percent, and low in 38.0 percent. Of inorganic constituents with human-health benchmarks, arsenic, vanadium, and nitrate were detected at high relative-concentrations in 15.6 percent, 3.6 percent, and 2.1 percent, respectively, of the primary aquifer. Of inorganic constituents with secondary maximum contaminant levels (SMCL), manganese, iron, and TDS were detected at high relative-concentrations in 4.5 percent, 2.2 percent, and 1.7 percent, respectively, of the primary aquifer. The status assessment for organic constituents showed that organic constituents (one or more) were high, relative to human-health benchmarks, in a smaller proportion of the primary aquifer (1.2 percent) than inorganic constituents (18.0 percent). Organic constituents had moderate relative-concentrations in 14.3 percent, and had low relative-concentrations or were not detected in 84.5 percent, of the primary aquifer. The proportion of the primary aquifer with high relative-concentrations of organic constituents reflected high proportions of the discontinued soil fumigant 1,2-dibromo-3-chlororopane (DBCP; 1.0 percent) and the solvent tetrachloroethene (PCE; 0.2 percent). Most of the organic and special interest constituents detected in groundwater in the Central Eastside study unit have human-health benchmarks. Of the 205 organic and special interest constituents analyzed for, 36 constituents were detected. Of these constituents, 32 were detected only at low relative-concentrations. Four constituents, chloroform, carbon tetrachloride, DBCP, and perchlorate, were detected at moderate relative-concentrations in grid wells. Nine organic and special-interest constituents were detected frequently (detected in greater than 10 percent of samples): the trihalomethanes chloroform, bromoform, bromodichloromethane, and dibromochloromethane; the solvent PCE; the herbicides atrazine, simazine, and metolachlor, and special-interest constituent perchlorate. An assessment of understanding of the groundwater quality included sampling of understanding wells, some of which were perforated in shallower or deeper portions of the aquifer system than the primary aquifer, and analysis of correlations of groundwater quality with land use, depth, age classification, and other potential explanatory factors. The understanding assessment indicated that the concentrations of many constituents were related to depth and groundwater age. However, concentrations of individual constituents or constituent classes also were sometimes related to geochemical conditions, lateral position in the flow system, or land use. High and moderate relative-concentrations of uranium, nitrate, and total dissolved solids (TDS) were detected in some wells where the tops of perforations are within the upper 200 feet of the aquifer system. In wells with the depth to the top of perforations below this depth, concentrations were low. A similar pattern occurred for the sum of herbicide concentrations. These vertical water-chemistry patterns are consistent with the hydrogeologic setting, in which return flows from agricultural and urban land use are the major source of recharge, and withdrawals for irrigation and urban supply are the major source of discharge, resulting in substantial vertical components of groundwater flow. The decrease in concentrations of many constituents with depth reflects in part that groundwater gets older with depth. Tritium, helium-isotopes, and carbon-14 data were used to classify the predominant age of groundwater samples into three categories: modern (water that has entered the aquifer in the last 50 years), pre-modern (water that entered the aquifer more than 50 years, up to tens of thousands of years, ago), and mixed (mixtures of waters with modern and pre-modern ages). Uranium, nitrate, and herbicide concentrations were significantly higher in groundwater having modern- and mixed-ages than pre-modern ages, indicating that these constituents may be affected by anthropogenic activities in the last 50 years. Other patterns in the distribution of nitrate, uranium, and TDS are evident. Isotopic and geochemical data are consistent with partial denitrification of nitrate in some reducing groundwaters in the western and deeper parts of the flow system. Uranium and TDS concentrations increase from east to west across the valley, along the direction of regional lateral groundwater flow. High and moderate relative-concentrations of arsenic can be attributed to reductive dissolution of manganese or iron oxides, or to desorption by high pH waters. Arsenic concentrations also increased with increasing depth and groundwater age. High to moderate relative-concentrations of vanadium primarily are related to high pH under oxic conditions. The frequency of detections of DBCP was greater in areas with orchard-vineyard land use >40 percent and at depths <200 feet. THMs and solvents were correlated positively with percent urban land use. Herbicide concentrations were correlated negatively with percent natural land use. Perchlorate concentrations were significantly greater in waters having modern and mixed ages than waters having pre-modern ages and were significantly and positively correlated with two land uses—percent orchard/vineyard land use and percent urban land use.

California↗