USGS Science⌕ Search

SEARCH · USGS Science

Results for “Photogrammetric Engineering and Remote Sensing (PE&RS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 91Linked to original sources
USGS2024

Geoelectric evidence for a wide spatial footprint of active extension in central Colorado

Three-dimensional magnetotelluric (MT) imaging in central Colorado reveals a set of north-striking high-conductivity tracks at lower-crustal (50–20 km) depths, with conductive finger-like structures rising off these tracks into the middle crust (20–5 km depth). We interpret these features to represent saline aqueous fluids and partial melt that are products of active extensional tectonomagmatism. These conductors are distributed over a wider region than the narrow corridor along which Rio Grande rift structures are traditionally mapped at the surface, and they consequently demarcate regions of the lower crust where accommodation of bulk extensional strain has concentrated conductive phases. Our observations reveal limitations in existing models of Rio Grande rift activity and may reflect unrecognized spatiotemporal variations in rift system evolution globally.

Colorado↗
USGS2000

Estimating the probability of elevated nitrate (NO2+NO3-N) concentrations in ground water in the Columbia Basin Ground Water Management Area, Washington

Logistic regression was used to relate anthropogenic (man-made) and natural factors to the occurrence of elevated concentrations of nitrite plus nitrate as nitrogen in ground water in the Columbia Basin Ground Water Management Area, eastern Washington. Variables that were analyzed included well depth, depth of well casing, ground-water recharge rates, presence of canals, fertilizer application amounts, soils, surficial geology, and land-use types. The variables that best explain the occurrence of nitrate concentrations above 3 milligrams per liter in wells were the amount of fertilizer applied annually within a 2-kilometer radius of a well and the depth of the well casing; the variables that best explain the occurrence of nitrate above 10 milligrams per liter included the amount of fertilizer applied annually within a 3-kilometer radius of a well, the depth of the well casing, and the mean soil hydrologic group, which is a measure of soil infiltration rate. Based on the relations between these variables and elevated nitrate concentrations, models were developed using logistic regression that predict the probability that ground water will exceed a nitrate concentration of either 3 milligrams per liter or 10 milligrams per liter. Maps were produced that illustrate the predicted probability that ground-water nitrate concentrations will exceed 3 milligrams per liter or 10 milligrams per liter for wells cased to 78 feet below land surface (median casing depth) and the predicted depth to which wells would need to be cased in order to have an 80-percent probability of drawing water with a nitrate concentration below either 3 milligrams per liter or 10 milligrams per liter. Maps showing the predicted probability for the occurrence of elevated nitrate concentrations indicate that the irrigated agricultural regions are most at risk. The predicted depths to which wells need to be cased in order to have an 80-percent chance of obtaining low nitrate ground water exceed 600 feet in the irrigated agricultural regions, whereas wells in dryland agricultural areas generally need a casing in excess of 400 feet. The predicted depth to which wells need to be cased to have at least an 80-percent chance to draw water with a nitrate concentration less than 10 milligrams per liter generally did not exceed 800 feet, with a 200-foot casing depth typical of the majority of the area.

Washington↗
USGS1976

Uranium analysis of single drops of natural waters using the fission-track technique

The fission-track technique has been applied to uranium analysis of natural waters using a single drop of water. Samples may be collected in the field by evaporating a drop of water on a detector, and samples may then be analyzed by returning the detector to the laboratory. A sample collecting kit has been assembled, which facilitates the designed sampling method. Some unique advantages of this technique are picogram sensitivity (10 -12 g) for uranium on single drops of water, maintenance of sample integrity during transport and storage, and the ability to discern whether the uranium is in solution or in the suspended material. Counting the tracks is the most time-consuming part of the analysis, but it can be reduced by using automatic counting systems. The analytical error is generally ± 10 percent over the entire range of concentrations.

Open-File Report↗
USGS2025

State shifts in the deep Critical Zone drive landscape evolution in volcanic terrains

Understanding the near-surface environment where atmospheric and solid earth processes interact, often termed the “Critical Zone,” is important for assessing resources and building resilient societies. Here, we examine a volcanic landscape in the Oregon Cascade Range, an understudied Critical Zone setting that is host to major regional water resources, pervasive silicate weathering, and significant geohazards. We leverage a bedrock age chronosequence to show that the volcanic Critical Zone undergoes a structural shift, from depth extents of >1 km to meters, over timescales of ~1 My. We map an active groundwater volume comparable to major continental lakes, stored at the Cascade Range crest. This state shift makes volcanic landscape evolution a unique probe of deep coupling between Earth systems.

PNAS↗
USGS2026

Microtextural characteristics of adularia in banded quartz veins from the Midas low-sulfidation epithermal deposit, Nevada

High-grade ores at the Miocene Midas low-sulfidation epithermal deposit in northern Nevada are confined to crustiform quartz veins containing abundant adularia. Micro-X-ray fluorescence elemental mapping reveals that adularia is a common gangue mineral occurring in colloform bands, bands showing bladed textures, and bands with dendritic terminations. The adularia aggregates have delicate shapes and are comprised of stacked, submillimeter crystals hosted by fine-grained quartz. The textural evidence suggests that the adularia aggregates originally formed within a gel-like, noncrystalline silica matrix, which subsequently transformed into quartz. This indicates that the adularia did not precipitate in open space along the vein walls. Correlative microscopy, involving scanning electron microscopy-based automated mineralogy and optical petrography, demonstrates that bands containing abundant adularia are not the primary host to ore minerals. The ore minerals occur in different bands within the crustiform veins, implying that adularia and ore mineral precipitation did not always occur simultaneously. It is hypothesized here that fluid flow at Midas involved intermittent short-lived events of fluid flashing, causing rapid solute supersaturation in the liquid. During each flashing event, different amounts of vapor were produced along a given vein. Compositional differences between adjacent bands in the crustiform quartz veins may, therefore, be linked to variations in the amount of vapor formed during each flash event.

Nevada↗
USGS2026

A ground-motion model derived using a generalized mean rupture distance for large slab interface earthquakes

Source–station distance is a central input to ground‐motion models (GMMs) for predicting seismic shaking. GMM development uses distance metrics including the Joyner–Boore distance, which is the shortest distance from an observation point to the surface projection of the earthquake rupture, and R rup the shortest distance to the rupture in three dimensions. Thompson and Baltay (2018) proposed the generalized mean rupture distance R p to address observed near‐fault ground‐motion saturation. R p accounts for the contribution to the shaking of all parts of the rupture and provides a simple method for incorporating spatially variable slip. They used R p to develop a GMM for shallow crustal earthquakes, assuming uniform slip. Here, we investigate the improvement offered by an R p ‐based GMM for large subduction interface earthquakes by recalibrating the path term for a published GMM ( Parker et al. , 2022 ) using R p derived from distributed slip models (DSMs). Inspection of within‐event and total residuals indicates that the recalibrated model fits the data at least as well as an alternative in which the path term was recalibrated using R rup and the same dataset. Incorporating slip information in its entirety or trimming the DSM geometry is preferable to assuming uniform moment release on a prescribed model fault that extends beyond the actual ruptured area. R p tuned to minimize model uncertainty is closer to the maximum distance to rupture for peak ground velocity (PGV) than acceleration, possibly reflecting the contribution to high‐frequency shaking of slip on local asperities. However, when the moment is concentrated far from stations, PGV is fit adequately with R p closer to R rup ⁠ . Our results suggest incorporating slip‐derived moment release through R p could improve GMMs for slab interface events, especially if the implementation of R p ‐based models is refined using a larger dataset of earthquakes with greater geographic diversity to account for regional ground‐motion variations.

Seismological Research Letters↗
USGS2025

Analysis of the potential effects of Uzbekistan’s mineral endowment on the critical mineral supply of tungsten

Tungsten appears on the 2018 and 2022 U.S. Geological Survey critical mineral lists in part because of a very high global production concentration in China, which produces almost 83 percent of the world’s mined tungsten. Using known parameters and values from other tungsten mining operations, we created hypothetical scenarios in which three tungsten deposits in Uzbekistan are considered for development. Our results show that all three deposits are likely to be economically viable to develop under 2024 market conditions. If the three studied tungsten deposits were put into production, Uzbekistan could become the third-leading tungsten-producing country in the world and increase world output of tungsten by 2.7 percent. Putting these tungsten deposits in Uzbekistan into production could slightly reduce the tungsten global market concentration, therefore reducing the supply disruption potential for tungsten.

Open-File Report↗
USGS2024

Simulated ground-motion records for the seismic assessment of monumental masonry structures

Earthquakes are natural disasters that can cause widespread devastation and loss of life. Simulated ground-motion records can be useful in regions with limited seismic stations or a history of damaging but infrequent earthquakes. This is especially true in areas with a high concentration of heritage masonry structures, which are especially susceptible to damage, as simulated records can be crucial in predicting their seismic response and protecting these buildings from seismic damage. Despite the importance of simulated earthquakes, few studies have investigated how effective they are compared to real earthquakes when assessing the structural response of heritage buildings. To address this knowledge gap, we employ two different simulation methods of the Mw 6.2 Faial earthquake, which occurred on July 9th, 1998, in the Azores, to replicate the recorded time-series at four available stations within an epicentral distance of 150 km. The study has two objectives: first, to validate the simulated records of the 1998 Faial earthquake using alternative stochastic ground-motion simulation approaches, and second, to determine how these approaches impact the seismic assessment of historic masonry structures. To accomplish these objectives, this study uses real and simulated ground-motion datasets to conduct non-linear response history analyses of the São Francisco Church, a monumental structure in Horta that sustained damage during the Faial earthquake. The results show that both simulation approaches yield structural responses similar to the observed records.

Conference Paper↗
USGS2025

Anomalous shear stress variation in wet granular medium: Implications for landslide lateral faults

Landslide assessments typically focus on the mechanical properties of the basal shear zone, but lateral faults are frequently overlooked, possibly due to their lower normal stresses and variably saturated conditions. Using double-cylinder shear experiments on wet granular systems as analogs for landslide lateral faults, we observe anomalous shear stress variations with fluid volume fractions, defying an expected unimodal relationship associated with capillary cohesion. At low fluid volume fractions, shear strength weakens as the wet grain assembly experiences reduced lateral pressure and increased boundary slip. This boundary slip subsequently vanishes, with an abrupt strengthening due to the dilation of the grain assembly against fluid surface tension as saturation approaches. Strike-slip motion and confinement in this system explain the strength anomaly, highlighting a critical role of lateral faults in landslide stability, particularly in cases where dynamics cannot be adequately explained by monitored pore-water pressure or basal friction.

Geophysical Research Letters↗
USGS1977

Acid-rain weathering of a metasedimentary rock basin, Herkimer County, New York

A geochemical balance of major chemical constituents of precipitation inflow with those of surface-water outflow was used to evaluate the effect of acid rainfall (average pH = 4.3) on weathering rates of metasedimentary rocks underlying a surface-water basin in New York State. Precipitation samples and surface-water samples show that approximately 45 percent of the net cation outflow is due to weathering by precipitation acidity. The remaining 55 percent of the cation load in the outflow is attributed to interactions between atmosphere, rock, and soil water in the unsaturated zone. Comparison of the acidity of acid precipitation and air-equilibrated distilled water suggests that since preindustrial time, precipitation acidity has probably increased weathering rates for this basin approximately 75 percent. The increased acidity of the precipitation may also increase the rate of dissolution of heavy metals from water-piping systems.

New York↗
USGS2025

Horizontal transport of Picture Gorge Basalt magma through the Monument Dike Swarm determined by magnetic fabric

Flood basalts of the mid-Miocene Columbia River Basalt Group (CRBG) cover 210,000 km 2 of Washington, Oregon, and Idaho. The source of CRBG melt is debated; widely spaced feeder dike swarms can be projected toward hypothetical sources near the Oregon-Idaho border. In this study, we use anisotropy of magnetic susceptibility (AMS) to track magma flow in the Monument dike swarm (MDS), the feeder dikes of the Picture Gorge Basalt (PGB). This small formation of the main-phase CRBG eruptions allows us to explore in detail the localized dynamics of a large igneous province feeder system, with implications for the larger CRBG picture. We measured the magnetic fabric of 205 oriented paleomagnetic specimens subsampled from 97 samples collected from 15 dikes of the MDS. Thermal demagnetization and hysteresis loops show that the magnetic minerals are a mixture of single domain and multidomain sized titanomagnetites. At three dikes, the paleodepth of sampling was determined to be shallow (<350 m). Magma flowing through dikes has been shown—in most cases— to acquire an anisotropic magnetic fabric with an AMS ellipsoid minimum axis perpendicular to the wall and maximum axis aligned in the direction of flow. Of 15 dikes, 12 show horizontal flow directions in the plane of the dike. Only one dike displayed imbricated fabrics, showing westward flow away from the Oregon-Idaho border. We conclude that magma flow in the MDS was sub-horizontal from a distal source.

Oregon↗
USGS2026

Variable pH habitats could help prepare stone crabs for coastal acidification

Coastal acidification is being exacerbated by terrestrial organic inputs, especially after high precipitation events. Florida’s rainy season coincides with stone crab ( Menippe mercenaria) reproduction, and pH extremes could limit future harvests by reducing reproductive output. Populations that experience pH variability can serve as “natural laboratories” for estimating the tolerance of a species to coastal acidification. Here, we conducted a series of experiments to determine if ovigerous stone crabs conditioned in more variable pH habitats (seagrass) would result in faster embryonic development, greater hatching success, and higher larval survival relative to crabs conditioned in habitats with lower pH variability (sandy habitats). After field conditioning, crabs were transported to the laboratory and randomly acclimated to either a control pH (pH = ~ 7.90) or a reduced pH condition (pH = ~ 7.60) until larval release. The rate of embryo development was slower in the laboratory reduced pH treatment, however, there were no observable field condition effects on embryo development rate. Crabs conditioned in the more pH variable seagrass habitat did have greater hatching success and higher larval survival than crabs in less pH variable sandy habitats; however, larval survival was low across all treatments. These results suggest that the pH variability experienced in seagrass habitats during brooding may serve as a mechanism for stone crabs to acclimatize to extremes in seawater pH.

Marine Biology↗
USGS2025

Annual NLCD (National Land Cover Database)—The next generation of land cover mapping

Introduction The widely used National Land Cover Database (NLCD) has long been the foundational land cover source for scientists, resource managers, and decision makers across the United States. In 2024, a reinvention as Annual NLCD added the key improvement of annual time steps to show decades of change at a higher frequency than the intervals of 2–3 years used in the legacy NLCD. Annual NLCD was derived primarily from the long Landsat satellite data record, and it includes data from other sources. The first release in 2024 of Annual NLCD provides Collection 1.0 of products encompassing land cover and land change from 1985 through 2023 for the conterminous United States (CONUS). The Annual NLCD Collection 1.0 consists of six operational products that map the unique characteristics of land cover. A map created from Annual NLCD shows 16 land cover classes for the CONUS in 2023.

conterminous United States↗
USGS2024

Imaging of seismic discontinuities using an adjoint method

For imaging of seismic discontinuities at depth, reverse time migration (RTM) is a powerful method to apply to recordings of seismic events. It is especially powerful when an extensive receiver array, numerous seismic sources, or both, permit adequate reconstruction of incident and scattered wavefields at depth. Reconstructing either the incident or scattered wavefield at depth becomes less accurate when relatively few recordings of seismic events are available. Here we explore an inverse scattering approach to imaging discontinuities based on an adjoint method, employing sensitivity kernels (Frechet derivatives) that represent jumps in material properties across seismic-discontinuity surfaces. When combined with ray-based requirements on scattering geometry, it constitutes a powerful approach to determining the locations and amplitudes of the discontinuities, recovering only those properties that can be resolved by a spatially limited source and/or receiver distribution. This is illustrated by synthetic examples with local sources followed by a field example in a subduction zone setting

Washington↗
USGS2024

Predictions of groundwater PFAS occurrence at drinking water supply depths in the United States

Per- and polyfluoroalkyl substances (PFAS), known colloquially as “forever chemicals”, have been associated with adverse human health effects and have contaminated drinking water supplies across the United States owing to their long-term and widespread use. People in the United States may unknowingly be drinking water that contains PFAS because of a lack of systematic analysis, particularly in domestic water supplies. We present an extreme gradient boosting model for predicting the occurrence of PFAS in groundwater at the depths of drinking water supply for the conterminous United States. Our model results indicate that 71 to 95 million people in the conterminous United States potentially rely on groundwater with detectable concentrations of PFAS for their drinking-water supplies prior to any treatment.

conterminous United States↗
USGS2024

Deep syntectonic burial of the Anthracite belt, Eastern Pennsylvania

Fluid inclusion microthermometry and Raman spectroscopy of fluid inclusions in quartz veins from the Pennsylvanian rocks of the Anthracite belt, eastern Pennsylvania support a deep burial model of coalification in favor of focused orogenic hot fluid flow. High-temperature (250 to 255 °C) trapping of CH 4 ± CO 2 saturated aqueous fluids and CH 4 ± CO 2 inclusions indicate fluid trapping at depths of 11.5 to 13.4 km under a cover of Pennsylvanian to Permian(?) syntectonic load. In the folded rocks to the south of the Anthracite belt, CH 4 ± CO 2 fluid inclusions indicate a sediment load that was up to 16.3 km thick. Re -equilibrated aqueous fluid inclusions from veins in Silurian through Devonian rocks give the same range of trapping conditions but a wide range of fluid salinities suggesting that folding, fracturing, and meteoric recharge resulted in the intermixing of fluids from throughout the stratigraphic succession.

Pennsylvania↗
USGS2024

topoBuilder quick start guide

TopoBuilder is a public web application from the National Geospatial Program that enables anyone to create customized digital U.S. Geological Survey (USGS) topographic maps, called OnDemand Topos, with the best available, most up-to-date data from The National Map (nationalmap.gov). OnDemand Topos can be made at different scales or quadrangles and can cover anywhere within the United States and its territories.

Fact Sheet↗
USGS2025

An exploration of the relative influence of physical models for Omori’s law

Omori’s law states that the rate of aftershocks decays as a function of inverse time. There are multiple physical explanations that we reduce into a nonlinear mixed effects relation of three terms: (1) a Rate/State expression that can account for static/dynamic and viscoelastic triggering caused directly by the mainshock, (2) a fluid diffusion triggering term, and (3) a randomized secondary triggering (cascade) term. We fit free physical-model parameters to an observed aftershock sequence through two nonlinear regression methods to find the relative contributions of physics-based models in an observed aftershock sequence. Results from both methods show that Rate/State models overpredict aftershock rates by ∼0–30%. Secondary aftershocks cause a net negative contribution (seismicity rate reduction that corrects overprediction by other terms) ranging between ∼0 and 30%. All regression solutions yield negative secondary triggering contributions without being guided to do so. A physical explanation for this is that aftershock occurrence relieves stress from the crust, ultimately causing the sequence to extinguish itself. Fluid diffusion triggering contributions range from ∼0 to 20%. Diffusion processes are observed to be shorter in time than the full duration of an aftershock sequence and they are also spatially limited, diminishing their influence. Our results apply to an aftershock decay curve from the 2016 Central Apennines earthquake sequence, meaning that our specific results may not be general. Our primary conclusion is that any one physical model cannot alone fit the observed sequence as well as the combination of three we investigated.

Frontiers in Earth Science↗