SEARCH · USGS Science

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91Linked to original sources

USGS2017

Developing flood-inundation maps for Johnson Creek, Portland, Oregon

Digital flood-inundation maps were created for a 12.9‑mile reach of Johnson Creek by the U.S. Geological Survey (USGS). The flood-inundation maps depict estimates of water depth and areal extent of flooding from the mouth of Johnson Creek to just upstream of Southeast 174th Avenue in Portland, Oregon. Each flood-inundation map is based on a specific water level and associated streamflow at the USGS streamgage, Johnson Creek at Sycamore, Oregon (14211500), which is located near the upstream boundary of the maps. The maps produced by the USGS, and the forecasted flood hydrographs produced by National Weather Service River Forecast Center can be accessed through the USGS Flood Inundation Mapper Web site ( http://wimcloud.usgs.gov/apps/FIM/FloodInundationMapper.html ) . Water-surface elevations were computed for Johnson Creek using a combined one-dimensional and two‑dimensional unsteady hydraulic flow model. The model was calibrated using data collected from the flood of December 2015 (including the calculated streamflows at two USGS streamgages on Johnson Creek) and validated with data from the flood of January 2009. Results were typically within 0.6 foot (ft) of recorded or measured water-surface elevations from the December 2015 flood, and within 0.8 ft from the January 2009 flood. Output from the hydraulic model was used to create eight flood inundation maps ranging in stage from 9 to 16 ft. Boundary condition hydrographs were identical in shape to those from the December 2015 flood event, but were scaled up or down to produce the amount of streamflow corresponding to a specific water-surface elevation at the Sycamore streamgage (14211500). Sensitivity analyses using other hydrograph shapes, and a version of the model in which the peak flow is maintained for an extended period of time, showed minimal variation, except for overbank areas near the Foster Floodplain Natural Area. Simulated water-surface profiles were combined with light detection and ranging (lidar) data collected in 2014 to delineate water-surface extents for each of the eight modeled stages. The availability of flood-inundation maps in conjunction with real-time data from the USGS streamgages along Johnson Creek and forecasted hydrographs from the National Weather Service Northwest River Forecast Center will provide residents of the watershed and emergency management personnel with valuable information that may aid in flood response, including potential evacuations, road closures, and mitigation efforts. In addition, these maps may be used for post-flood recovery efforts.

Oregon↗

USGS2008

Elements in Mud and Snow in the Vicinity of the DeLong Mountain Regional Transportation System Road, Red Dog Mine, and Cape Krusenstern National Monument, Alaska, 2005-06

A small number of mud, road bed soil, and snow samples were collected in 2005 and 2006 to assess metal concentrations and loadings to areas adjacent to the DeLong Mountain Regional Transportation System (DMTS) road in northwest Alaska. The DMTS road is used by large trucks to transport lead and zinc concentrates from Red Dog Mine to the shipping facility at Red Dog Port; it traverses 32 kilometers of land in Cape Krusenstern National Monument (CAKR). Mud collected in the summer of 2005 from wheel-wells of two passenger vehicles used for transport between Red Dog Mine and the port facility were enriched in cadmium, lead, and zinc by factors of about 200 to 800 as compared with mud collected from a vehicle stationed in Kotzebue, Alaska, whereas DMTS road bed soil samples were enriched by factors of 6 to 12. Thus, as of 2005, dispersal of mine ore wastes or concentrates by vehicles appeared to remain a potential source of metals along the DMTS road. Compared to snow samples obtained near a gravel road located near Kotzebue, Alaska, metal loadings estimated from individual snow samples collected in CAKR in April 2006 near three creeks, 13 to 50 meters from the road, were greater by factors of 13 to 316 for cadmium, 28 to 589 for lead, and 8 to 195 for zinc. When averaged for all three creek locations, mean loadings of cadmium, lead, and zinc calculated from snow samples collected at a nominal distance of 15 meters to the north of the road were 0.63, 34, and 89 milligrams of metal per square meter, respectively. Variability of particulate and metal loadings between individual samples and the three creek locations probably was affected by localized meteorological conditions and micro-topography on the snow drift and scour patterns, but road orientation on attainable truck speeds also might have been a factor. Results indicated that the ?port effect?, previously attributed to fugitive metal-enriched dusts stemming from concentrate transfer operations at the port facility, was not necessarily an important factor affecting spatial differences of metals deposition in snow along the road in CAKR during winter 2005?06. The average metal content of particulates in 2005?06 snow samples was slightly less than that of snow samples collected by the U.S. Geological Survey in CAKR at three near-road locations in April 2003. Mean metals concentrations in 2006 snow particulates were about three times greater than in the road bed soils that were sampled in 2005; however, the fraction of annual metals loadings occurring in winter as compared to the remainder of the year was not readily determined by these data. Although procedures have been implemented in recent years to reduce the quantities of metal-enriched fugitive dusts, particulates dispersed near the road during the winter of 2005?06 were enriched in metals and these particulates contributed considerable metal loadings to the nearby terrain.

Scientific Investigations Report↗

USGS1954

Criteria for the mode of emplacement of the alkaline stock at Mount Monadnock, Vermont

The alkaline stock at Mount Monadnock , Vermont , described briefly by Wolff (1929), has been restudied in detail. Its petrography and structure are discussed here and conclusions are drawn as to its mode of emplacement . The stock consists of plutonic and hypabyssal rocks which intrude folded Ordovician (?) schist and quartzite. The longer axis, trending north-northwest across the strike of the country rock, is 3 miles long, and the shorter one about 2 1/2 miles. Essentially the stock consists of quartz syenite, but it encloses a long arcuate mass of older essexite and transition rock, and along its eastern edge are later intrusions of granite. Late dikes of various compositions cut the plutonics and surrounding metamorphic rocks. The following facts have been established: (1) The igneous rocks are typical representatives of the White Mountain magma series (Mississippian?), quite lacking in foliation and lineation. (2) The stock is discordant and has an elliptical ground plan. (3) In detail the boundary is irregular and characterized by abundant dikes and xenoliths. (4) The igneous rocks make sharp contacts with the metamorphosed country rock. (5) The arcuate mass of older essexite is undoubtedly a screen. (6) The small bodies of late granite resemble ring dikes. (7) The stock is cut by prominent sets of steeply dipping radial and tangential joints. (8) The late dikes show radial and tangential patterns. (9) Along the northern and southern margins of the stock the country rock shows strikes and dips which differ from the regional ones. From these criteria it is concluded that the plutonic rocks have invaded the crust by cauldron subsidence accompanied by the stoping of large arcuate slabs and smaller blocks from the walls of the magma reservoir.

Vermont↗

USGS1962

Geology and ground-water resources of Fond du Lac County, Wisconsin

The principal water-bearing rocks underlying Fond du Lac County, Wis., are sandstones of Cambrian and Ordovician age and dolomite of Silurian age. Other aquifers include dolomite of Ordovician age and sand. and gravel of Quaternary age. Crystalline rocks of Precambrian age, which underlie all the water-bearing formations, form a practically impermeable basement complex and yield little or no water to wells. Ground water is the source of all public and most private and industrial water supplies in the county. The municipalities and industries obtain water chiefly from wells that penetrate the sandstones of Cambrian and Ordorician age. The Platteville formation and Galena dolomite of Ordovician age and the Niagara dolomite of Silurian age supply water to most domestic and stock wells and to a few industrial wells. Several buried valleys in the bedrock surface contain water-bearing deposits of sand and gravel. The source of the ground water in Fond du Lac County is local precipitation. Recharge to the water-bearing beds occurs in most of the county but is greatest where the bedrock formations are near the surface. Ground water is discharged by seeps and springs, by evaporation and transpiration, and by wells. Ground-water levels in wells fluctuate in response to recharge and to natural discharge and pumping. In areas not affected by pumping, water levels generally decline through the summer months because of natural discharge and lack of recharge, recover slightly in the fall after the first killing frost, decline during the winter, and recover in the spring when recharge is greatest. In areas of heavy pumping, the water levels are lowest in late summer and highest in late winter. Water levels in wells in the Fond du Lac area were about 5 to 50 feet above the land surface in 1885, but they had declined to as low as 185 feet below the land surface by 1957. Coefficients of transmissibility and storage of the sandstones of Cambrian and Ordovician age were determined by making controlled aquifer tests at Fond du Lac. The coefficients were verified by comparing computed water-level declines with actual declines. The computed values were within about 30 percent of the actual values, a reasonable agreement for coefficients of this type. Probable declines of water levels by 1966 were computed, using the same coefficients of transmissibility and storage. If the distribution of wells and the rate of pumping remain the same in 1957-66 as they were in 1956, the water levels will decline about 5 feet more by 1966. If, however, the distribution of pumped wells remains the same but the pumping by the city of Fond du Lac increases at a uniform rate from the 3 mgd (million gallons per day) pumped in 1956 to 5 mgd in 1966, the water levels in 1966 will be at least 60 feet below those of 1956. Dispersal of wells to the northwest toward the recharge area would reduce the water-level declines. The results of pumping tests, of test holes tapping the Niagara dolomite indicate that wells producing at least 200 gpm (gallons per minute) could be developed east of the Niagara escarpment. The ground water in Fond do Lac County is, in general, a hard calcium and magnesium bicarbonate water, which contains excessive iron in some areas.

Wisconsin↗

USGS1972

Reconnaissance geology of the Bi'r Al Badriyah quadrangle, Kingdom of Saudi Arabia

The Bi'r al Badriyah quadrangle covers an area of 2843 sq km in the extreme eastern part of the Precambrian Shield in central Saudi Arabia. The Precambrian rocks in the southeastern part of the area are unconformably overlain by limestone of Permian age, which occupies only a small part of the quadrangle. Three great sequences of Precambrian rocks are recognized and called, from oldest to youngest, the Halaban Group, the Bi'r Khountina Group, and the Murdama Group. From evidence within the quadrangle itself the three groups are seen to be separated by erosional unconformities, and the Halaban and Bi'r Khountina Groups are intruded by granitic and gabbroic plutonic rocks and a wide variety of dikes. Exposures north of the quadrangle show that the Murdama Group is also intruded by granitic rocks. The Halaban Group, consists of three formations called, from oldest to youngest, the Umm Mushraha Formation, the Jebal al Egfool Formation, and the Wadi al Jifr Formation. These rocks are variably metamorphosed, but characteristically they are at the epidote-albite amphibolite facies of regional metamorphism, are polymetamorphic, and rest unconformably on ancient granite gneiss. The Umm Mushraha Formation consists of amphibolite, schistose andesite, and greenstone associated with minor meta-agglomerate, meta-graywacke, and marble. The Jebal al Egfool Formation consists of sheared and metamorphosed volcanic rocks of intermediate composition, and the Wadi al Jifr Formation is made up of metamorphosed felsic volcanic rocks. Rocks of the Bi'r Khountina Group are rather similar to the Halaban Group in original composition, but they are separated from the Halaban by an angular unconformity and have distinctive formations of conglomerate (the Idsas Formation), marble (the Fawara Formation), and graywacke (the Abu Sawarir Formation) at the base. Most of the Bi'r Khountina Group consists of andesitic volcanic rocks in the Badriyah Formation. Mostly, the Bi'r Khountina Group is unmetamorphosed or feebly metamorphosed to the greenschist facies. Locally, as in the aureole of intrusive rocks, the Bi'r Khountina Group reaches higher metamorphic grades. The rocks of the Murdama Group unconformably overlie the Bi'r Khountina Group, and basal conglomerates of the Murdama contain fragments of distinctive rocks intrusive into the Bi'r Khountina. The Murdama Group is composed of the Z'relba Formation, Consisting of conglomerate and schistose conglomerate and the Abt Formation, a thick sequence of laminated, mainly fine-grained, sedimentary rocks. Metamorphism in .the Murdama increases toward the north, and along the north edge of the area the Murdama Group is represented by chlorite-sericite schists. Three major episodes of folding are recorded in the Precambrian rocks. The earliest episode folded the rocks of the Halaban Group along north-trending axes which are now truncated by the unconformity at the base of the Bi'r Khountina Group. After the rocks of the Bi'r Khountina and Murdama Groups were deposited, the three groups were folded along northwest-trending axes of regional scale. Later, possibly at a time of major faulting along a northwesterly direction, the rocks were again folded on north-trending axes. Samples of rock materials collected at 105 localities in the quadrangle were analyzed for 27 elements. Only one anomalous value was found: a low positive anomaly for lead at the Umm Mushraha gold mine. Threshold amounts of Ag, B, Cr, Cu, La, Mn, Mo, NI, Sc, Sn, Ti, V, and Zr were detected. The distribution of copper and molybdenum suggests that two plutons of biotite-hornblende granite in the central part of the quadrangle, and the rocks between them, should be examined for possible disseminated copper and molybdenum of the porphyry type. The distribution of scandium and detrital scheelite suggests that a zone adjacent to phyllonite in the northeastern quarter of the quadrangle be examined for tungsten associated with amphibolite.

Open-File Report↗

USGS2020

Origin and geochemistry of formation waters from the lower Eagle Ford Group, Gulf Coast Basin, south central Texas

The lower Eagle Ford Group (LEFG) is one of the most productive continuous hydrocarbon plays in the United States but few associated produced waters data and minimal interpretation have been published. This effort focuses on results from compositional and isotopic data from 39 produced water samples collected from horizontal wells producing from the LEFG in south central Texas. The depth of the LEFG increases by approximately 1 km across the study area, from northwest (2.9 km) to southeast (3.9 km). Associated increases in calculated reservoir temperature (125-165 C), development of reservoir over-pressuring (400-800 bars total pressure), and increased thermal maturity (heavy oil to gas condensate) also occur along this trend. Produced water salinity starts at nearly 100 g/L in the shallowest samples and decreases linearly with depth to <35 g/L. Comparison of Br/Cl and ⁸⁷Sr/⁸⁶Sr data between LEFG produced waters and the Louann salt, suggests that halite recycling is the mechanism behind salinity greater than seawater. Decreasing salinity with depth and thermal maturity in the Gulf Coast Basin have previously been shown to be a result of release of inter-layer water during smectite to illite conversion. The produced water samples show increasing 18O and decreasing 2H with depth, which is attributed temperature-dependent isotope fractionation of O and H exchange between seawater and clays and calcite with increasing temperature. Multiple sources of data indicate that the waters in the LEFG are not connate, but rather entered the unit prior to smectite-illite conversion. Presence of allochthonous water in many major tight oil and shale gas plays in the U.S., including the LEFG, suggests there is unknown mechanism allowing for water advection into low permeability reservoirs.

Texas↗

USGS1962

Hornblendes formed during progressive metamorphism of amphibolites, northwest Adirondack Mountains, New York

Hornblendes in amphibolite interlayers in the paragneiss of the northwest Adirondack Mountains undergo systematic changes in color, composition, and density during progressive metamorphism from almandine- amphibolite to hornblende -granulite facies. In contrast, indices of refraction of the hornblendes remain about constant. In the almandine- amphibolite facies the amphibolite layers have the bulk composition of a saturated basalt and consist of bluish-green hornblende , andesine, and quartz. As these layers are traced into the hornblende -granulite facies, their composition undergoes a progressive change to that of an olivine basalt with brownish-green hornblende , clinopyroxene and orthopyroxene, and calcic andesine as major constituents. Compositional changes in the hornblendes with increasing grade of metamorphism include increases in Ti, Na, K, Cr, V, and Sc. Decreases occur in the amounts of Mn, Zn, OH + F + Cl, and in the ratios Fe 2 O 3 /FeO and Fe/Mg. Density of the hornblendes increases from 3.260 to 3.278 with the increasing grade of metamorphism . These changes in the hornblendes with increasing T and P, although well denned, are less pronounced than those measured in biotites and garnets of the enclosing paragneiss. Large variations in the physical and chemical properties of hornblendes in metamafic rocks reconstituted above the epidote- amphibolite facies appear to be induced principally by critical changes in the bulk composition of the total rock, and not by the regional gradients in T, P, or by changes in kind, or composition, of the coexisting minerals.

New York↗

USGS1963

Metasomatic origin of large parts of the Adirondack Phacoliths

A metasomatic origin seems established for large parts of the granite phacoliths in the northwest Adirondack Mountains, New York. This conclusion is based upon the discovery and detailed mapping of a blurred but widespread stratigraphic sequence in the phacoliths . Highly complicated patterns of relict beds are defined by alternations of granitic gneiss, amphibolite, oligoclase-quartz gneiss, and a predominant alaskitic granite. Regional reconstructions indicate these relict beds comprise a major basal formation, probably of arkosic and calcareous quartzites, in the exposed Grenville metasedimentary rocks. The existing amphibolite interlayers formed early in the metasomatic epoch, probably replacing the more calcareous quartzite beds. This mafic metasomatism was overlapped and followed by pervasive granitization of the arkosic and highly quartzose members. Pink alaskitic granite is the final metasomacic product. It tends to replace all pre-existing rock types, especially in the cores of the antiforms. This mafic and granitic metasomatism occurred during the evolution of the major folds in the metasedimentary sequence. As the folds evolved, rising domes in the quartzite probed upward into successively higher horizons in the overlying marbles. At least three quartzite antiforms (California, Clark Pond, and South Edwards phacoliths ) punctured the overlying marble, invading the basal layers of the Adirondack paragneiss. The crests of the evolving folds in the basal quartzite, capped by carbonate-rich marble, acted as traps for aqueous and carbonated, alkali-bearing fluids, and perhaps some associated anatectic granitic magma generated in the deeper, hotter basement to the Grenville.

New York↗

USGS2003

Structural localization and origin of compartmentalized fluid flow, Comstock lode, Virginia City, Nevada

Bonanza-grade orebodies in epithermal-style mineral deposits characteristically occur as discrete zones within spatially more extensive fault and/or fracture systems. Empirically, the segregation of such systems into compartments of higher and lower permeability appears to be a key process necessary for high-grade ore formation and, most commonly, it is such concentrations of metals that make an epithermal vein district world class. In the world-class silver- and gold-producing Comstock mining district, Nevada, several lines of evidence lead to the conclusion that the Comstock lode is localized in an extensional stepover between right-lateral fault zones. This evidence includes fault geometries, kinematic indicators of slip, the hydraulic connectivity of faults as demonstrated by veins and dikes along faults, and the opening of a normal-fault-bounded, asymmetric basin between two parallel and overlapping northwest-striking, lateral- to lateral-oblique-slip fault zones. During basin opening, thick, generally subeconomic, banded quartz-adularia veins were deposited in the normal fault zone, the Comstock fault, and along one of the bounding lateral fault zones, the Silver City fault. As deformation continued, the intrusion of dikes and small plugs into the hanging wall of the Comstock fault zone may have impeded the ability of the stepover to accommodate displacement on the bounding strike-slip faults through extension within the stepover. A transient period of transpressional deformation of the Comstock fault zone ensued, and the early-stage veins were deformed through boudinaging and hydraulic fragmentation, fault-motion inversion, and high- and low-angle axial rotations of segments of the fault planes and some fault-bounded wedges. This deformation led to the formation of spatially restricted compartments of high vertical permeability and hydraulic connectivity and low lateral hydraulic connectivity. Bonanza orebodies were formed in the compartmentalized zones of high permeability and hydraulic connectivity. As heat flow and related hydrothermal activitv waned along the Comstock fault zone, extension was reactivated in the stepover along the Occidental zone of normal faults east of the Comstock fault zone. Volcanic and related intrusive activity in this part of the stepover led to a new episode of hydrothermal activity and formation of the Occidental lodes.

Economic Geology↗

USGS2007

Map and Database of Probable and Possible Quaternary Faults in Afghanistan

The U.S. Geological Survey (USGS) with support from the U.S. Agency for International Development (USAID) mission in Afghanistan, has prepared a digital map showing the distribution of probable and suspected Quaternary faults in Afghanistan. This map is a key component of a broader effort to assess and map the country's seismic hazards. Our analyses of remote-sensing imagery reveal a complex array of tectonic features that we interpret to be probable and possible active faults within the country and in the surrounding border region. In our compilation, we have mapped previously recognized active faults in greater detail, and have categorized individual features based on their geomorphic expression. We assigned mapped features to eight newly defined domains, each of which contains features that appear to have similar styles of deformation. The styles of deformation associated with each domain provide insight into the kinematics of the modern tectonism, and define a tectonic framework that helps constrain deformational models of the Alpine-Himalayan orogenic belt. The modern fault movements, deformation, and earthquakes in Afghanistan are driven by the collision between the northward-moving Indian subcontinent and Eurasia. The patterns of probable and possible Quaternary faults generally show that much of the modern tectonic activity is related to transfer of plate-boundary deformation across the country. The left-lateral, strike-slip Chaman fault in southeastern Afghanistan probably has the highest slip rate of any fault in the country; to the north, this slip is distributed onto several fault systems. At the southern margin of the Kabul block, the style of faulting changes from mainly strike-slip motion associated with the boundary between the Indian and Eurasian plates, to transpressional and transtensional faulting. North and northeast of the Kabul block, we recognized a complex pattern of potentially active strike-slip, thrust, and normal faults that form a conjugate shear system in a transpressional region of the Trans-Himalayan orogenic belt. The general patterns and orientations of faults and the styles of deformation that we interpret from the imagery are consistent with the styles of faulting determined from focal mechanisms of historical earthquakes. Northwest-trending strike-slip fault zones are cut and displaced by younger, southeast-verging thrust faults; these relations define the interaction between northwest-southeast-oriented contraction and northwest-directed extrusion in the western Himalaya, Pamir, and Hindu Kush regions. Transpression extends into north-central Afghanistan where north-verging contraction along the east-west-trending Alburz-Marmul fault system interacts with northwest-trending strike-slip faults. Pressure ridges related to thrust faulting and extensional basins bounded by normal faults are located at major stepovers in these northwest-trending strike-slip systems. In contrast, young faulting in central and western Afghanistan indicates that the deformation is dominated by extension where strike-slip fault zones transition into regions of normal faults. In addition to these initial observations, our digital map and database provide a foundation that can be expanded, complemented, and modified as future investigations provide more detailed information about the location, characteristics, and history of movement on Quaternary faults in Afghanistan.

Open-File Report↗

USGS1987

Petrogenesis of gabbronorite at Yakobi and northwest Chichagof Islands, Alaska

On Yakobi Island and at Mirror Harbor on the northwest coast of Chichagof Island, gabbronorite occurs as irregular bodies, as much as 5.5 km in maximum dimension, mostly within a 40 to 43 m.y. composite pluton consisting largely of tonalite. The gab-bronorites are the host rocks for a magmatic nickel-copper sulfide deposit consisting predominantly of pyrrhotite, pentlandite, and chalcopyrite. The gabbronorites characteristically have more orthopyroxene than augite and have a significant amount of hornblende. Rock types mapped as gabbronorite range from hornblende pyroxenite to hornblende-pyroxene gabbronorite to quartz-bearing norite and gabbronorite. The tonalite pluton is composed of hornblende diorite, biotite-hornblende diorite, hornblende quartz diorite, biotite-hornblende tonalite, and biotite granodiorite. Contacts between types of gabbronorite are generally gradational on a scale of centimetres to metres; contacts between gabbronorite and the tonalite pluton are gradational on a scale of metres to tens of metres. Rock textures, pyroxene-hornblende relations, and rock and mineral chemistry of the gabbronorites show systematic changes as the gabbronorites grade into the tonalites. The field, petrographic, and chemical data, including trace-element abundances, of the gabbronorites and tonalite pluton rocks can best be explained by either (1) crystallization of gabbronorite from a tholeiitic magma with subsequent assimilation by tonalite that was simultaneously undergoing fractional crystallization or (2) fractional crystallization of a quartz diorite parent magma yielding the range of gabbronorites and tonalite pluton rocks.

Geological Society of America Bulletin↗

USGS2012

A conceptual model of the hydrogeologic framework, geochemistry, and groundwater-flow system of the Edwards-Trinity and related aquifers in the Pecos County region, Texas

A conceptual model of the hydrogeologic framework, geochemistry, and groundwater-flow system of the Edwards-Trinity and related aquifers, which include the Pecos Valley, Igneous, Dockum, Rustler, and Capitan Reef aquifers, was developed as the second phase of a groundwater availability study in the Pecos County region in west Texas. The first phase of the study was to collect and compile groundwater, surface-water, water-quality, geophysical, and geologic data in the area. The third phase of the study involves a numerical groundwater-flow model of the Edwards-Trinity aquifer in order to simulate groundwater conditions based on various groundwater-withdrawal scenarios. Resource managers plan to use the results of the study to establish management strategies for the groundwater system. The hydrogeologic framework is composed of the hydrostratigraphy, structural features, and hydraulic properties of the groundwater system. Well and geophysical logs were interpreted to define the top and base surfaces of the Edwards-Trinity aquifer units. Elevations of the top and base of the Edwards-Trinity aquifer generally decrease from the southwestern part of the study area to the northeast. The thicknesses of the Edwards-Trinity aquifer units were calculated using the interpolated top and base surfaces of the hydrostratigraphic units. Some of the thinnest sections of the aquifer were in the eastern part of the study area and some of the thickest sections were in the Pecos, Monument Draw, and Belding-Coyanosa trough areas. Normal-fault zones, which formed as growth and collapse features as sediments were deposited along the margins of more resistant rocks and as overlying sediments collapsed into the voids created by the dissolution of Permian-age evaporite deposits, were delineated based on the interpretation of hydrostratigraphic cross sections. The lowest aquifer transmissivity values were measured in the eastern part of the study area; the highest transmissivity values were measured in a faulted area of the Monument Draw trough. Hydraulic conductivity values generally exhibited the same trends as the transmissivity values. Groundwater-quality data and groundwater-level data were used in context with the hydrogeologic framework to assess the chemical characteristics of water from different sources, regional groundwater-flow paths, recharge sources, the mixing of water from different sources, and discharge in the study area. Groundwater-level altitudes generally decrease from southwest to northeast and regional groundwater flow is from areas of recharge south and west to the north and northeast. Four principal sources of recharge to the Edwards-Trinity aquifer were identified: (1) regional flow that originated as recharge northwest of the study area, (2) runoff from the Barilla, Davis, and Glass Mountains, (3) return flow from irrigation, and (4) upwelling from deeper aquifers. Results indicated Edwards-Trinity aquifer water in the study area was dominated by mineralized, regional groundwater flow that most likely recharged during the cooler, wetter climates of the Pleistocene with variable contributions of recent, local recharge. Groundwater generally flows into the down-dip extent of the Edwards-Trinity aquifer where it discharges into overlying or underlying aquifer units, discharges from springs, discharges to the Pecos River, follows a regional flow path east out of the study area, or is withdrawn by groundwater wells. Structural features such as mountains, troughs, and faults play a substantial role in the distribution of recharge, local and regional groundwater flow, spring discharge, and aquifer interaction.

Texas↗

USGS2015

Water levels of the Ozark aquifer in northern Arkansas, 2013

The Ozark aquifer is the largest aquifer, both in area of outcrop and thickness, and the most important source of freshwater in the Ozark Plateaus physiographic province, supplying water to northern Arkansas, southeastern Kansas, southern Missouri, and northeastern Oklahoma. The study area includes 16 Arkansas counties lying completely or partially within the Ozark Plateaus of the Interior Highlands major physiographic division. The U.S. Geological Survey, in cooperation with the Arkansas Natural Resources Commission and the Arkansas Geological Survey, conducted a study of water levels in the Ozark aquifer within Arkansas. This report presents a potentiometric-surface map of the Ozark aquifer within the Ozark Plateaus of northern Arkansas, representing water-level conditions for the early spring of 2013 and selected water-level hydrographs. The Ozark aquifer in Arkansas is composed of dolomites, limestones, sandstones, and shales of Late Cambrian to Middle Devonian age and ranges in thickness from approximately 1,100 feet (ft) in northwestern Arkansas to more than 4,000 ft in the west-central part of Arkansas. Most wells completed in the aquifer yield between 50 and 100 gallons per minute (gal/min), although some wells may yield as much as 600 gal/min. Water-level measurements were made in wells completed in the Ozark aquifer from February to May 2013. Hydrographs were constructed for nine wells that have water-level measurements with a minimum 20-year period of record. Water-level altitudes in wells used to construct the potentiometric-surface map range from about 1,159 ft to 313 ft above National Geodetic Vertical Datum of 1929 (NGVD 29). The highest water-level altitudes occur in Carroll and Washington Counties while water-level altitudes of less than 400 ft above NGVD 29 are mapped along the eastern and southeastern part of the study area in Independence, Lawrence, Randolph, and Sharp Counties. The lowest water level of 313 ft above NGVD 29 was measured in southwestern Randolph County. The direction of groundwater flow generally is affected by local topography, flowing from high altitudes toward stream valleys. In southern Baxter, eastern Fulton, Independence, eastern Izard, Lawrence, Randolph, and Sharp Counties, the groundwater flow is generally to the south and southeast. In western Fulton and Izard Counties, the groundwater flow is generally to the southwest. In Boone, Marion, Newton, Searcy, and Stone Counties, the groundwater flow is generally to the east and northeast. In eastern Benton, Carroll, Madison, and eastern Washington Counties, the groundwater flow is generally to the north and northeast. In western Benton and western Washington Counties, the groundwater flow is generally to the west and northwest. The general level and shape of the potentiometric surface has changed little since predevelopment. A comparison of the predevelopment potentiometric surface and the 2007, 2010, and 2013 potentiometric surfaces indicate general agreement between the mapped surfaces with the exception of parts of Benton, Boone, Marion, and Washington Counties. In Boone and northern Marion Counties in 2013, water levels have declined when compared to the predevelopment potentiometric surface, although the direction of flow is still to the northeast and north. In southern Marion County, water levels have declined when compared to the predevelopment, 2007, and 2010 potentiometric surfaces, although the direction of flow is towards and along the stream valleys. In western Benton and northwestern Washington Counties, water levels are similar when compared to the predevelopment potentiometric surface, and the direction of flow is to the west and northwest, similar to the predevelopment direction of flow. The mapped 2007 and 2010 potentiometric surfaces are very different from the mapped 2013 potentiometric surface in western Benton and northwestern Washington Counties. The mapped 2013 potentiometric surface in western Benton and northwestern Washington Counties follows the contours of the top of the formation, similar to the predevelopment potentiometric surface. Since 1975, water use in the Ozark aquifer has declined 45 percent, while water levels in Benton, Boone, Marion, and Washington Counties continue to decline. Nine hydrographs were selected as representative of the water-level conditions in their respective counties. Wells in Fulton, Izard, and Newton Counties (station names 20N08W27ABD1, 18N09W15BCB1, and 16N21W34ABC1, respectively) have water levels that are within the usual range of values for their respective counties. Wells in Boone, Marion, and Washington Counties (station names 18N19W19BCC1, 19N15W20ACC1, and 16N32W09ABD1, respectively) have water levels that have recently declined or are declining for the period of record. Wells in Benton, Carroll, and Sharp Counties (station names 19N29W07DAA1, 21N26W17BCC1, and 15N05W06DDD1, respectively) have water levels that have been rising recently.

Arkansas↗

USGS2014

Correlation chart of Pennsylvanian rocks in Alabama, Tennessee, Kentucky, Virginia, West Virginia, Ohio, Maryland, and Pennsylvania showing approximate position of coal beds, coal zones, and key stratigraphic units

The Appalachian basin, one of the largest Pennsylvanian bituminous coal-producing regions in the world, currently contains nearly one-half of the top 15 coal-producing States in the United States (Energy Information Agency, 2006). Anthracite of Pennsylvanian age occurs in synclinal basins in eastern Pennsylvania, but production is minimal. A simplified correlation chart was compiled from published and unpublished sources as a means of visualizing currently accepted stratigraphic relations between the rock formations, coal beds, coal zones, and key stratigraphic units in Alabama, Tennessee, Kentucky, Virginia, West Virginia, Ohio, Maryland, and Pennsylvania. The thickness of each column is based on chronostratigraphic divisions (Lower, Middle, and Upper Pennsylvanian), not the thickness of strata. Researchers of Pennsylvanian strata in the Appalachian basin also use biostratigraphic markers and other relative and absolute geologic age associations between the rocks to better understand the spatial relations of the strata. Thus, the stratigraphic correlation data in this chart should be considered provisional and will be updated as coal-bearing rocks within the Appalachian coal regions continue to be evaluated. Most geologic formations are identified and defined by the distinctive lithologic features they contain. However, formations of Pennsylvanian age in the Appalachian basin and the Pennsylvania Anthracite region have traditionally been described and named to reflect the presence or absence of economic coal beds and coarse-grained sandstone units, most of which have since been proven to be locally or regionally discontinuous (Ruppert and Rice, 2001). Many of the stratigraphic names and boundaries used for the coals and other geologic units in the Pennsylvanian rocks differ between States or regions (fig. 1). Because local and regional stratigraphic complexities occur within some States, a multiplicity of State-specific names is introduced that may be confusing to those conducting regional geologic assessments in the basin. Nonetheless, many of these stratigraphic names and boundaries have some elements that allow for regional stratigraphic correlation. For instance, many coals in the northern Appalachian basin coal region are easier to trace over greater distances than coals in the central and southern Appalachian basin coal regions (fig. 2). The Upper Pennsylvanian Pittsburgh coal bed (fig. 1) of the northern Appalachian basin coal region, for example, occurs as a synchronogenic bed deposited on a laterally continuous surface of sediments (Cross, 1954; Tewalt and others, 2001). The base of the Pittsburgh coal bed is designated as the contact between the Conemaugh Group (Upper Pennsylvanian) and the overlying Monongahela Group in western Pennsylvania, western Maryland, Ohio, and West Virginia (fig. 1). Therefore, in areas where the Pittsburgh coal bed is present, there is little controversy over its position or the placement of the boundary between the Conemaugh and Monongahela Groups. In other regions of the basin, group and formation boundaries are more difficult to identify over extensive areas. One example is the placement of the contact between the New River Formation and the overlying Kanawha Formation—a boundary that is not easily defined beyond the area where these units were first defined in West Virginia. At the type section of the Kanawha Formation, the base of the Lower Douglas coal zone (fig. 1) defines the contact between the Kanawha Formation and the underlying New River Formation (Rice and others, 1994b). However, subsequent mapping has demonstrated that the Lower Douglas coal zone is regionally discontinuous and in many parts of West Virginia is absent (Blake and others, 2002). Where absent, the Nuttall Sandstone Member of the underlying New River Formation sometimes occurs in the stratigraphic position of the Lower Douglas coal zone. Yet, even the Nuttall Sandstone Member has been found to be regionally discontinuous and of varying thickness throughout its extent, features that hinder its use as a regional stratigraphic marker bed in the Appalachian basin. Because of the many names used to identify individual coal beds and coal zones in the historic Appalachian basin coal-mining districts, coal bed designations may differ even more than stratigraphic nomenclature. In eastern Kentucky, northwest of the Pine Mountain thrust fault on the Cumberland overthrust sheet, for example, coal beds or coal zones equivalent to the Lower Elkhorn coal zone (within the Pikeville Formation) are identified also as the Eagle coal zone, Pond Creek coal zone, and Blue Gem coal bed (fig. 1). Southeast of the Pine Mountain thrust fault, yet still in Kentucky, equivalent coals in this same interval are known as the Imboden and Rich Mountain. Moreover, this same interval of coal is identified as the Blue Gem coal in Tennessee, the Imboden coal bed or Campbell Creek or Pond Creek coal zones in Virginia, and the Eagle coal zone in West Virginia.

Appalachian basin↗

USGS1987

Geologic map of the east part of the San Francisco Volcanic Field, north-central Arizona

The geologic map of the east part of the San Francisco volcanic field (called the East map area) is one of five adjoining geologic maps (fig. 1) prepared under the Geothermal Research Program of the U.S. Geological Survey as a basis for interpreting the history of magmatic activity in the volcanic field. This map is a revision of an earlier one (Moore and Wolfe, 1976). Detail of pyroclastic and alluvial deposits has been reduced for clarity on this uncolored version, and eolian deposits, represented by numerous active dunes of basaltic ash, have been completely omitted. Small cinder cones developed over rootless vents on the basalt flow (Qbb) of = vent 2019 have also been omitted. In addition, a few changes have been made in correlations of flows and vents. The stratigraphic classification has been modified because magnetic-polarity determinations and new K-Ar ages indicate that the physiographically defined Tappan and Woodhouse age groups (Moore and others, 1976) overlap significantly in age, and the rocks of those age groups are now assigned to the Brunhes or Matuyama Polarity Chronozones (Mankinen and Dalrymple, 1979). The San Francisco field, which is largely Pliocene and Pleistocene in age, is in northern Arizona, just north of the broad transition zone between the Colorado Plateau and the Basin and Range province. It is one of several dominantly basaltic volcanic fields of late Cenozoic age situated near the southern margin of the Colorado Plateau. The East map area encompasses approximately 1,220 km 2 . The volcanic field contains rocks ranging in composition from basalt to rhyolite--the products of eruption through Precambrian basement rocks and approximately a kilometer of overlying, nearly horizontal, Paleozoic and Mesozoic sedimentary rocks. About 500 km 3 of erupted rocks cover about 5,000 km 2 of predominantly Permian and locally preserved Triassic sedimentary rocks that form the erosionally stripped surface of the Colorado Plateau in northern Arizona. In the East map area, basalt, basaltic andesite and locally associated small dacite domes, and, in a few cases, andesite were extruded from numerous individual vents, each of which presumably erupted briefly and then became inactive. Such short-lived vents, represented mainly by cinder cones or tuff rings, are widely distributed over the map area, and their flows cover much of its surface. However, repeated eruption of andesite, dacite, and rhyolite domes and flows formed the O'Leary Peak eruptive center in the northwest part of the map area, and flows of andesite (Qa 1 and Qa 2 ) from the San Francisco Mountain stratovolcano entered the East map area from the west. A northeastward progression of volcanism during the past 15 m.y., from central Arizona into the San Francisco volcanic field, is shown by the compilation of Luedke and Smith (1978). Although complicated in detail, a general northeastward to eastward progression of volcanic activity is also apparent within the San Francisco volcanic field. Thus, much of the eruptive activity of the East map area occurred late in the development of the San Francisco field, and the East map area includes the youngest volcanic rocks of the field. These youngest rocks were formed during the Sunset Crater eruption, which occurred within the past 1,000 years (Smiley, 1958). A northeast-trending, faulted monocline occurs near Doney Mountain in the north-central part of the East map area, and a broad north- to northwest-trending anticline occurs at the east edge of the map area. Nearby volcanic rocks are not folded or faulted by either structure. Northwest-trending normal faults of small throw occur in the southern and northwestern parts of the map area. The faults in the northwestern part transect basalt flows of Matuyama and Brunhes ages (Tmb, Qmb, and Qbb). The volcanic rocks are not faulted elsewhere in the East map area. However, local northwestward elongation and alignment of vent deposits, as shown for example by the fissure deposits of the Sunset Crater eruption (Qbsbf), indicate the presence of a northwest-trending fracture system that apparently localized some of the eruptive feeders.

Arizona↗

USGS2015

California State Waters Map Series — Offshore of San Francisco, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of San Francisco map area is centered on the City of San Francisco and the Golden Gate channel, a waterway that connects the Pacific Ocean to the San Francisco Bay between the Marin Headlands and San Francisco Peninsula. The San Francisco Bay Area is the second-largest urban area on the U.S. West Coast with a combined population of over seven million. The bay supports several major cargo ports and the Port of San Francisco’s Fisherman’s Wharf is a major center for Northern California’s commercial and sport fishing fleets. The coastal part of the map area predominantly consists of high bluffs and vertical sea cliffs shaped by uplift and erosion of the Marin Headlands and San Francisco Peninsula east of the San Andreas and San Gregorio Fault Zones. The seafloor in the map area extends from the shoreline and western end of the Golden Gate channel to water depths of about 30 to 50 m, except for the San Andreas graben area, where water depths reach 75 m. Sea-level rise, tidal currents, and tectonics have shaped bathymetry in the map area. During the Last Glacial Maximum, Sea level was about 125 m lower than present day and the shoreline was more than 45 km west of San Francisco near the Farallon Islands. At that time, the map area was part of a large alluvial plain connected to a drainage basin that included much of California’s Central Valley. A river system flowed westward through the narrows of the Golden Gate channel and an alluvial valley bounded to the north and south by bedrock highlands, including the present-day Pacifica-Pescadero and Bolinas shelves. Rising seas entered the Golden Gate about 11,000 to 10,000 years ago and subsequent marine flooding led to progressive growth of the San Francisco Bay. Strong tidal currents, accelerating through the relatively narrow Golden Gate, have scoured the bedrock channel to a depth of 113 m. East and west of the channel, tidal currents decelerate and form large fields of sand waves. Offshore of the Marin Headlands, eastward transfer of right-lateral fault slip in a complex of faults northwest of the map area has caused extension and the formation of a sediment basin called the San Andreas graben on the continental shelf. The accommodation space created by extension on the shelf and the proximity to sediment transported to the ocean through San Francisco Bay results in a sand-dominated offshore shelf environment. Seafloor habitats in the Offshore of San Francisco map area comprise significant sand-dominated sediment habitat with sand wave and ripple bedforms indicative of high wave and current energy. North of the Golden Gate, biological productivity resulting from coastal upwelling supports populations of Sooty Shearwater, Western Gull, Common Murre, Cassin’s Auklet, and many other less populous bird species. In addition, an observable recovery of Humpback and Blue Whales has occurred in the area; both species are dependent on coastal upwelling to provide nutrients. For the first time in 65 years, Pacific Harbor Porpoise returned to San Francisco Bay in 2009. On the coast north of the Golden Gate, the large extent of exposed inner shelf bedrock supports large forests of “bull kelp,” which is well adapted for high wave-energy environments. Common fish species found in the kelp beds and rocky reefs include painted greenling, kelp greenling, lingcod, and several varieties of rockfish. Circulation over the continental shelf in the Offshore of San Francisco map area is dominated by the southward-flowing California Current, an eastern limb of the North Pacific Gyre that flows from Oregon to Baja California. At its midpoint offshore of central California, the California Current transports subarctic surface waters southeastward, about 150 to 1,300 km from shore. Seasonal northwesterly winds that are, in part, responsible for the California Current, generate coastal upwelling. Ocean temperatures offshore of central California have increased over the past 50 years, driving an ecosystem shift from the productive subarctic regime towards a depopulated subtropical environment.

California↗

USGS1961

Tertiary geology and oil-shale resources of the Piceance Creek basin between the Colorado and White Rivers, northwestern Colorado

The area of the Piceance Creek basin between the Colorado and White Rivers includes approximately 1,600 square miles and is characterized by an extensive plateau that rises 1,000 to more than 4,000 feet above the surrounding lowlands. Relief is greatest in Naval Oil-Shale Reserves Nos. 1 and 3 near the south margin of the area, where the spectacular Roan Cliffs tower above the valley of the Colorado River. The oldest rocks exposed in the mapped area are sandstone, shale, and coal beds of the Mesaverde group of Late Cretaceous age, which crop out along the east margin of the area. Overlying the Mesaverde is an unnamed sequence of dark-colored sandstone and shale, Paleocene in age. The Ohio Creek conglomerate, composed of black and red chert and quartzite pebbles in a white sandstone matrix, is probably the basal unit in the Paleocene sequence. The Wasatch formation of early Eocene age overlies the Paleocene sedimentary rocks. It is composed of brightly colored shale, lenticular beds of sandstone, and a few thin beds of fresh-water limestone. The Kasatch formation interfingers with and is overlain by the Green River formation of middle Eocene age. The Green River formation has been divided into the Douglas Creek, Garden Gulch, Anvil Points, Parachute Creek, and Evacuation Creek members. The basal and uppermost members, the Douglas Creek and Evacuation Creek, respectively, are predominantly sandy units. The two middle members, the Garden Gulch and Parachute Creek, are composed principally of finer clastic rocks. The Anvil Points member is present only on the southeast, east, and northeast margins of the area. It is a nearshore facies composed principally of sandstone and is the equivalent of the Douglas Creek, Garden Gulch, and the lower part of the Parachute Creek members. All of the richer exposed oil-shale beds are found in the Parachute Creek member, which is divided into two oil-shale zones by a series of low-grade oilshale beds. The upper oil-shale zone has several key beds and zones which can be traced throughout most of the mapped area. One of these, the Mahogany ledge or zone, is a group of very rich oil-shale beds at the base of the upper oil-shale zone. Drilling for oil and gas in the northeastern part of the area has revealed rich oil-shale zones in the Garden Gulch member also. Local unconformities within and at the base of the Evacuation Creek member are exposed at several places along Piceance Creek and at one place near the mouth of Yellow Creek; otherwise, the rock sequence is conformable. The mapped area is the major part of a large syncline, modified by numerous smaller structural features. Fractures, probably associated genetically with the minor structural features, are present in the central part of the area. These fractures are high-angle normal faults with small displacement. They occur in pairs with the intervening block downdropped. Two sets of joints are prominent, one trending northwest and the other northeast. The joint systems control the drainage pattern in the south-central part of the area. More than 20,000 feet of sedimentary rocks underlies the area. Many of the formations yield oil or gas in northwestern Colorado, northeastern Utah, and southwestern Wyoming. The Piceance Creek gas field, in which gas occurs in the Douglas Creek member of the Green River formation, is the largest oil or gas field discovered thus far within the area. About 7,000 million barrels of oil is contained in oil shale that yields an average of 45 gallons per ton from a continuous sequence 5 or more feet thick in the Mahogany zone. Oil shale in the Mahogany zone and adjacent beds that yields an average of 30 gallons of oil per ton from a continuous sequence 15 or more feet thick contains about 91,000 million barrels of oil. Similar shale in deeper zones in the northern part of the area, for which detailed estimates have not been prepared, are now known to contain at least an additional 72,000 million barrels of oil. Oil shale in a sequence 15 or more feet thick that yields an average of 25 gallons of oil per ton contains about 154,000 million barrels of oil in the Mahogany zone and adjacent beds; such shale in deeper zones in the northern part of the area probably contains at least an additional 157,000 million barrels of oil, although detailed estimates were not made. Oil shale in a sequence greater than 15 feet thick that yields an average of 15 gallons of oil per ton contains more than 900,000 million barrels of oil. These estimates of the oil content of the deposit do not take into account any loss in mining or processing of the shale.

Colorado↗

USGS2008

Submarine landslide as the source for the October 11, 1918 Mona Passage tsunami: Observations and modeling

The October 11, 1918 ML 7.5 earthquake in the Mona Passage between Hispaniola and Puerto Rico generated a local tsunami that claimed approximately 100 lives along the western coast of Puerto Rico. The area affected by this tsunami is now significantly more populated. Newly acquired high-resolution bathymetry and seismic reflection lines in the Mona Passage show a fresh submarine landslide 15 km northwest of Rinćon in northwestern Puerto Rico and in the vicinity of the first published earthquake epicenter. The landslide area is approximately 76 km2 and probably displaced a total volume of 10 km3. The landslide's headscarp is at a water depth of 1200 m, with the debris flow extending to a water depth of 4200 m. Submarine telegraph cables were reported cut by a landslide in this area following the earthquake, further suggesting that the landslide was the result of the October 11, 1918 earthquake. On the other hand, the location of the previously suggested source of the 1918 tsunami, a normal fault along the east wall of Mona Rift, does not show recent seafloor rupture. Using the extended, weakly non-linear hydrodynamic equations implemented in the program COULWAVE, we modeled the tsunami as generated by a landslide with a duration of 325 s (corresponding to an average speed of ~ 27 m/s) and with the observed dimensions and location. Calculated marigrams show a leading depression wave followed by a maximum positive amplitude in agreement with the reported polarity, relative amplitudes, and arrival times. Our results suggest this newly-identified landslide, which was likely triggered by the 1918 earthquake, was the primary cause of the October 11, 1918 tsunami and not the earthquake itself. Results from this study should be useful to help discern poorly constrained tsunami sources in other case studies.

Puerto Rico↗