USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geophysical Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91Linked to original sources
USGS2012

Compositions, growth mechanisms, and temporal relations of hydrothermal sulfide‐sulfate‐silica chimneys at the northern Cleft segment, Juan de Fuca Ridge

Three active hydrothermal vents forming sulfide mounds and chimneys (Monolith, Fountain, and Pipe Organ) and more widely distributed inactive chimneys are spatially related to a system of discontinuous fissures and young sheet flow lavas at the northern Cleft segment, Juan de Fuca Ridge. The formation of zoned tubular Curich chimneys (type I) on the Monolith sulfide mound is related to focused flow of high‐temperature (to 328°C) fluid. Bulbous chimneys (type II or “beehives”) at the Monolith and Fountain vents are products of diffuse high‐temperature (to 315°C) discharge. A broader zone of vigorous mixing between the hydrothermal fluid and seawater results in quench crystallization of anhydrite‐rich shells. Columnar Zn‐sulfide‐rich chimneys with narrow channelways (type III) are constructed where focused and relatively low‐temperature (261°C) fluid vents directly from the basalt substrate. The bulk chemistry (low Cu; high Pb, Ag, and SiO 2 contents), mineralogy (pyrite‐marcasite‐wurtzite‐amorphous silica‐anglesite), colloform and filamentous textures, and oxygen isotope characteristics of inactive (type IV) chimneys indicate a low‐temperature (<250°C) origin involving diffuse and sluggish flow patterns and conductive cooling. Seafloor observations and 210 Pb data indicate that (1) type IV chimneys are products of an earlier period of hydrothermal activity that ended no more than 60 years ago but prior to the sheet flow eruption, (2) the high‐temperature Monolith and Fountain vents are manifestations of the same heating event (shallow emplacement of magma) that led to the sheet flow eruption and recent megaplumes, and (3) the Pipe Organ Vent is in a very youthful stage of development and chimney deposition postdates the sheet flow eruption.

California, Oregon, Washington↗
USGS2012

Rock-forming metals and Pb in modern Alaskan snow

Metal concentrations in annual and subannual increments of snowpack from the accumulation zone of a south central Alaska glacier indicate that the deposition of Pb with and upon snow is decoupled from that of rock dusts. Rock dusts accumulate, apparently as dry deposition, on the topmost, exposed surfaces of snowpacks in spring and summer, whereas Pb does not. Pb concentration is elevated throughout the latest one third of an annual snowpack, whereas that of rock dusts is not. For whole-year snowpacks, there is a generally sympathetic relationship among concentration of Pb, concentration of rock dust, degree of dominance of rock dusts over ocean solutes, and ferromagnesian character of the rock dusts; however, the fractional abundance of Pb in whole year samples may decrease when rock dust masses become large and/or when rock dusts dominate most strongly over salts. The metal suite chosen to characterize rock dusts and to distinguish them from ocean solutes gives detailed information about rock type of dust source areas and about the nature of the degraded rock products that are taken up, transported, and deposited by the atmosphere. Rock dusts are present at concentrations of only about 300 nanograms (ng) of dust per gram of snow in the Alaskan snowpacks. Concentrations of Pb in the Alaska snow samples are moderate, ranging from 0.1 to 0.3 ng Pb/g snow. This contrasts with larger Pb concentrations of 0.4 to 0.9 ng Pb/g snow in whole-year snowpack samples from the Sierra Nevada, California; with similar to smaller concentrations from north and south Greenland of about 0.04 ng Pb/g snow or less, and about 0.2 ng Pb/g snow or less, respectively, and with much smaller concentrations from Antarctica, now believed to range from a minimum of about 0.001 to a maximum of 0.005 (or 0.01) ng Pb/g snow.

Journal of Geophysical Research D: Atmospheres↗
USGS2012

Lunar ferroan anorthosites: mineralogy, compositional variations, and petrogenesis

Detailed petrologic study of a suite of lunar ferroan anorthosites indicates that their mineral compositional variations are generally consistent with derivation of these anorthosites from a common parent magma. There are continuous compositional variations in major elements and smooth trends in minor elements (Mg, Fe in plagioclase; Al, Ti, Cr in pyroxene). Relict textures, zoning, and possible primary trends of mineral compositional variations are preserved in many of the anorthosites. The presence of heterogeneous, bimodal, and/or trimodal pyroxene compositions suggests that some of the anorthosites are polymict rocks; however, they are composed entirely of ferroan-anorthosite-suite lithologies. Some aspects of the mineral composition data suggest that complex processes operated during formation of the ferroan anorthosites. The lack of a well-defined, positive or negative trend of pyroxene Mg/(Mg + Fe) versus plagioclase anorthite content, the homogenization of mineral compositions in some anorthosites, and the varied and apparently enriched Mn contents of pyroxenes in some anorthosites suggest that original igneous compositional characteristics have been altered during and/or after crystallization. Processes operative during anorthosite formation may have included some mixing of different melts, trapping of variable amounts of intercumulus liquid, postcrystallization redistribution of elements, or perturbations both during adcumulus growth and subsequent to crystallization by impact events. FeO and MgO contents of the highly calcic plagioclase typical of these anorthosites suggest that the plagioclase-melt distribution coefficients for these elements need to be reassessed.

Journal of Geophysical Research↗
USGS2012

Galileo observations of Post-Imbrium lunar craters during the first Earth-Moon flyby

Copernican‐age craters are among the most conspicuous features seen on the far side and western limb of the Moon in the Galileo multispectral images acquired in December 1990. Among the new morphologic observations of far‐side craters are bright rays, continuous ejecta deposits, and dark rings associated with probable impact‐melt veneers. These observations suggest that the mapped age assignments of several large far‐side craters (Ohm, Robertson, and possibly Lowell and Lenz) need revision. New crater size‐frequency measurements on Lunar Orbiter images suggest the following age reassignments: Hausen (170 km diameter), Pythagoras (120 km), and Bullialdus (61 km) from Eratosthenian to Upper Imbrian, and Carpenter (60 km) and Harpalus (39 km) from Copernican to Eratosthenian. Colors and albedos of craters (away from impact‐melt veneers) are correlated with their geologic emplacement ages as determined from counts of superposed craters; these age‐color relations are used to estimate the emplacement age (time since impact event) for other Copernican‐age craters. These age‐color relations indicate a probable Copernican age for 27 far‐side or western limb craters larger than 10 km diameter that were not previously mapped as Copernican. The apparent deficiency of Copernican craters on the far side compared with the near side in published geologic maps is not present in our data. Age‐color trends differ between mare and highland regions and between the interiors and continuous ejecta of the craters. Similar trends are established for color and albedo versus soil‐maturity indices for the returned lunar samples, with distinct trends for mare and highland soils. However, the mare versus highland offsets are reversed in the two comparisons. These relations can be explained by variations in regolith thicknesses and rates of mixing with relatively fresh, crystalline ejecta. Therefore, the soil‐maturity trends represent longer geologic time periods in regions with thinner regoliths, such as the maria.

Journal of Geophysical Research E: Planets↗
USGS2012

Impact crater outflows on Venus: Morphology and emplacement mechanisms

Many of the 932 impact craters discovered by the Magellan spacecraft at Venus are associated with lobate flows that originate at or near the crater rim. They extend for several to several hundred kilometers from the crater, and they commonly have a strong radar backscatter. A morphologic study of all identifiable crater outflows on Venus has revealed that many individual flows each consist of two areas, defined by distinct morphologic features. These two areas appear to represent two stages of deposition for each flow. The part of the flow that is generally deposited closest to the crater tends to be on the downrange side of the crater, flows in the downrange direction, and it is interpreted to be a late-stage ejecta. In many cases, this proximal part of the flow is too thin to completely bury the large blocks in subjacent ejecta deposits. Dendritic channels, present in many proximal flows, appear to have drained liquid from the proximal part in the downhill direction, and they debouch to feed the outer part of the flows. This distal part flows downhill, fills small grabens, and is ponded by ridges, behavior that mimics that of volcanic lava flows. The meandering and dendritic channels and the relation of the distal flows to topography strongly suggest that the distal portion is the result of coalescence and slow drainage of impact melt from the proximal portion. Impact melt forms a lining to the transient crater and mixes turbulently with solid clasts, and part of this mixture may be ejected to form the proximal part of the flow during the excavation stage of crater development. A statistical study of the Venusian craters has revealed that, in general, large craters produced by impacts with relatively low incidence angles to the surface are more likely to produce flows than small craters produced by higher-angle impacts. The greater flow production and downrange focusing of the proximal flows with decreasing incidence angle indicate a strong control of the flows by the impactor flight direction, and a high downrange velocity imparted to the proximal flow material in lower angle impacts. On the Moon, small flows interpreted to be composed of impact melt are observed atop the ejecta of large, fresh craters; on Earth, melt-rich suevite deposits form the uppermost layer of ejecta of some fresh craters. These features, albeit much smaller, may be analogous to the flows on Venus. Numerical models have predicted that larger volumes of impact melt would be produced on Venus than on the cooler terrestrial bodies due to high atmospheric and target temperatures, perhaps 3 times the volume produced on the Moon for a given crater diameter.

Journal of Geophysical Research E: Planets↗
USGS2012

Coupling of volatile transport and internal heat flow on Triton

Recently Brown et al. (1991) showed that Triton's internal heat source could amount to 5–20% of the absorbed insolation on Triton, thus significantly affecting volatile transport and atmospheric pressure. Subsequently, Kirk and Brown (1991a) used simple analytical models of the effect of internal heat on the distribution of volatiles on Triton's surface, confirming the speculation of Brown et al. that Triton's internal heat flow could strongly couple to the surface volatile distribution. To further explore this idea, we present numerical models of the permanent distribution of nitrogen ice on Triton that include the effects of sunlight, the two‐dimensional distribution of internal heat flow, the coupling of internal heat flow to the surface distribution of nitrogen ice, and the finite viscosity of nitrogen ice. From these models we conclude that: (1) The strong vertical thermal gradient induced in Triton's polar caps by internal heat‐flow facilitates viscous spreading to lower latitudes, thus opposing the poleward transport of volatiles by sunlight, and, for plausible viscosities and nitrogen inventories, producing permanent caps of considerable latitudinal extent; (2) It is probable that there is a strong coupling between the surface distribution of nitrogen ice on Triton and internal heat flow; (3) Asymmetries in the spatial distribution of Triton's heat flow, possibly driven by large‐scale, volcanic activity or convection in Triton's interior, can result in permanent polar caps of unequal latitudinal extent, including the case of only one permanent polar cap; (4) Melting at the base of a permanent polar cap on Triton caused by internal heat flow can significantly enhance viscous spreading, and, as an alternative to the solid‐state greenhouse mechanism proposed by Brown et al. (1990), could provide the necessary energy, fluids, and/or gases to drive Triton's geyser‐like plumes; (5) The atmospheric collapse predicted to occur on Triton in the next 20 years (Spencer, 1990) may be plausibly avoided because of the large latitudinal extent expected for permanent polar caps on Triton.

Journal of Geophysical Research E: Planets↗
USGS2012

Topography of Valles Marineris: Implications for erosional and structural history

Compilation of a simplified geologic/geomorphic map onto digital terrain models of the Valles Marineris permitted an evaluation of elevations in the vicinity of the troughs and the calculation of depth of troughs below surrounding plateaus, thickness of deposits inside the troughs, volumes of void spaces above geologic/geomorphic units, and volumes of deposits. The central troughs north Ophir, north and central Candor, and north Melas Chasmata lie as much as 11 km below the adjacent plateaus. In Ophir and Candor Chasmata, interior layered deposits reach 8 km in elevation. If the deposits are lacustrine and if all troughs were interconnected, lake waters standing 8 km high would have spilled out of Coprates Chasma onto the surrounding plateaus having surface elevations of only 4–5 km. In this case, interior deposits above about 4 km in the central troughs would not be lacustrine. They could be volcanic. On the other hand, the troughs may not have been interconnected at the time of interior‐deposit emplacement; they may have formed isolated ancestral basins. The existence of such basins is supported by independent structural and stratigraphic evidence. The ancestral basins may have eventually merged, perhaps through renewed faulting, to form northern subsidiary troughs in Ophir and Candor Chasmata and the Coprates/north Melas/Ius graben system. The peripheral troughs are only 2–5 km deep, shallower than the central troughs. They may have formed from a combination of erosional collapse and structural activity. Chaotic terrain is seen in the peripheral troughs near a common contour level of about 4 km on the adjacent plateaus, which supports the idea of release of water under artesian pressure from confined aquifers. The layered deposits in the peripheral troughs may have formed in isolated depressions that harbored lakes and predated the formation of the deep outflow channels. If these layered deposits are of volcanic origin, they may have been emplaced beneath ice in the manner of table mountains. Areal and volumetric computations show that erosion widened the troughs by about one‐third and that deposits occupy one‐sixth of the interior space. Even though the volume eroded is larger than the volume deposited, topographic and geologic considerations imply that material eroded from trough walls was probably part of the interior layered deposits but not their sole source. Additional material may have come from subterranean piping, from reworking of local disintegration products on the floors, such as chaotic materials, or from eolian influx. But overall it is likely that the additional material is volcanic and that it forms mostly the upper, more diversely bedded layers of the interior deposits.

Journal of Geophysical Research E: Planets↗
USGS2012

Fluid expulsion sites on the Cascadia accretionary prism: mapping diagenetic deposits with processed GLORIA imagery

Point-discharge fluid expulsion on accretionary prisms is commonly indicated by diagenetic deposition of calcium carbonate cements and gas hydrates in near-surface (<10 m below seafloor; mbsf) hemipelagic sediment. The contrasting clastic and diagenetic lithologies should be apparent in side scan images. However, sonar also responds to variations in bottom slope, so unprocessed images mix topographic and lithologic information. We have processed GLORIA imagery from the Oregon continental margin to remove topographic effects. A synthetic side scan image was created initially from Sea Beam bathymetric data and then was subtracted iteratively from the original GLORIA data until topographic features disappeared. The residual image contains high-amplitude backscattering that we attribute to diagenetic deposits associated with fluid discharge, based on submersible mapping, Ocean Drilling Program drilling, and collected samples. Diagenetic deposits are concentrated (1) near an out-of-sequence thrust fault on the second ridge landward of the base of the continental slope, (2) along zones characterized by deep-seated strikeslip faults that cut transversely across the margin, and (3) in undeformed Cascadia Basin deposits which overlie incipient thrust faults seaward of the toe of the prism. There is no evidence of diagenetic deposition associated with the frontal thrust that rises from the dècollement. If the dècollement is an important aquifer, apparently the fluids are passed either to the strike-slip faults which intersect the dècollement or to the incipient faults in Cascadia Basin for expulsion. Diagenetic deposits seaward of the prism toe probably consist dominantly of gas hydrates.

Cascadia Basin↗
USGS2012

Evolution of the Precambrian lithosphere: Seismological and geochemical constraints

Several recent models of crustal evolution are based on the belief that the thickness of the continental crust is proportional to its age, with ancient crust being the thickest. A worldwide review of seismic structure contradicts this belief and falsifies these models, at least for the Archean. Proterozoic crust has a thickness of 40–55 km and a substantial high‐velocity (>7 km/s) layer at its base, while Archean crust is only 27–40 km thick (except at the site of younger rifts and collisional boundaries) and lacks the basal high‐velocity layer. Seismology also provides evidence that the lithosphere is thickest beneath Archean cratons, while diamond ages show that this lithospheric keel must have already existed in the Archean. Geochemical data also indicate significant differences between Archean and Proterozoic lithosphere. Major and trace element studies of sediments show a change in upper crustal composition between the Archean and Proterozoic. Archean rocks are depleted in Si and K and enriched in Na, Ca, and Mg. There is also a marked change in the Eu/Eu * ratio. Mantle xenoliths and continental flood basalts show that the mantle lithosphere beneath Archean crust is ultradepleted in FeO compared to that beneath post‐Archean crust. The secular change in the crust‐forming process is attributed to a decline in mantle temperature, leading to a change in the composition of the lithospheric mantle. The higher temperature of the Archean mantle led to the eruption of komatiitic lavas, producing a refractory lithospheric mantle which is ultradepleted in FeO and volatiles. The resultant lithospheric keel is intrinsically less dense than the surrounding mantle and thus not susceptible to delamination. It was sufficiently thick and cool for diamonds to form during the Archean. In contrast, Proterozoic crust developed above fertile mantle. The eruption of continental flood basalts and underplating of basaltic sills is attributed to subsequent heating and partial melting of the lithospheric mantle. Consequently, Proterozoic crust is thickened and has a high‐velocity basal layer.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Seismic guided waves trapped in the fault zone of the Landers, California, earthquake of 1992

A mobile seismic array of seven stations was deployed at 11 sites along the fault trace of the M 7.4 Landers earthquake of June 28, 1992, with a maximum offset of 1 km from the trace. We found a distinct wave train with a relatively long period following the S waves that shows up only when both the stations and the events are close to the fault trace. This wave train is interpreted as a seismic guided wave trapped in a low‐velocity fault zone. To study the distribution of amplitude of the guided waves with distance from the fault trace and also their attenuation with travel distance along the fault zone, we eliminated source and recording site effects by the coda normalization method. The normalized amplitudes of guided waves show a spectral peak at 3–4 Hz, which decays sharply with distance from the fault trace. Spectral amplitudes at high frequencies (8–15 Hz) show an opposite trend, increasing with distance from the fault trace. The normalized amplitudes of guided waves at 3–4 Hz also show a systematic decrease with hypocentral distance along the fault zone, from which we infer an apparent Q of 50. In order to confirm the existence of the guided waves, a dense array of 31 stations was deployed at one of the 11 sites. The resultant records revealed unequivocal evidence for the existence of guided waves associated with the fault zone. By modeling the waveforms as S waves trapped in a low‐velocity waveguide sandwiched between two homogeneous half‐spaces with velocity V s = 3.0 km/s, we infer a waveguide width of about 180 m, a shear velocity of 2.0–2.2 km/s, and a Q of ∼50. Hypocenters of aftershocks with clear guided waves show a systematic distribution both laterally and with depth delineating the extent of the low‐velocity fault zone in three dimensions. We find that the zone extends to a depth of at least 10 km. This zone apparently continues to the south across the Pinto Mountain fault because guided waves are observed at stations north of the Pinto Mountain fault for earthquakes with epicenters south of it. On the other hand, the zone appears to be discontinuous at the fault bend located about 20 km north of the mainshock epicenter; guided waves were observed for stations and epicenters which are located on the same sides of the fault bend but not for those on the opposite sides.

California↗
USGS2012

Postseismic deformation following the 1989 (M = 7.1): Loma Prieta, California, earthquake

Postseismic deformation along a 90‐km profile bisecting the projected surface trace of the coseismic rupture of the 1989 Loma Prieta earthquake has been monitored by frequent GPS surveys for 3.3 years following the earthquake. In addition to the expected deformation associated with secular strain accumulation on the San Andreas and Calaveras faults, deformation associated with postseismic readjustment has been detected. Most of that deformation can be attributed to 1.5 m right‐lateral and 0.9 m reverse postseismic slip on a 5‐km‐wide downdip extension of the Loma Prieta rupture. In addition, there seems to be a 0.1 m postseismic collapse of the Loma Prieta rupture zone in the direction perpendicular to the plane of the rupture. The fault‐normal (N48°E) surface displacements plotted as a function of time exhibit a curvature suggesting a relaxation time of about 1.4 years. Similar plots of the fault‐parallel (N42°W) displacement components do not exhibit significant curvature. Presumably, the deformation shown in those plots is dominated by secular strain accumulation along the San Andreas and Calaveras faults rather than postseismic relaxation.

California↗
USGS2012

The seismic velocity structure of the Newfoundland Appalachian orogen

The deep structure of the Newfoundland Appalachian orogen is investigated by analyses of three intersecting seismic refraction/wide-angle reflection profiles which traverse the Gander and Dunnage zones or central mobile belt of Newfoundland. A simultaneous travel time inversion for velocity and interface was applied to the in-line seismic refraction/wide-angle reflection data and constrained by synthetic amplitude models. The results of the modeling procedure show a subhorizontally layered crust with upper crustal velocities ranging from 5.4 to 6.2 km/s, a midcrustal velocity of 6.25–6.35 km/s, and a lower crustal velocity of 6.7±0.2 km/s. The top of the lower crust is marked by a series of prominent reflections between 18 and 23 km depth which suggest a complex layered velocity interface. Strong laterally coherent Moho reflections indicate a sharp crust-mantle transition at 35 ± 3 km. The uppermost mantle has a velocity of 8.0±0.2 km/s, and a reflecting horizon at 55 km depth suggests an increase to velocities approaching 8.5 km/s. Normal moveout corrections applied to fan profiles provide constraining evidence for the reflecting horizon at the top of the lower crust and laterally continuous Moho reflections at 11–12 s two-way travel time. Comparisons with a coincident deep seismic reflection profile show that the refraction and reflection Mohos match to better than 2–3 km. Bulk Poisson's ratios of 0.23–0.24 for the whole crust calculated from P m P / S m S travel times suggest a crust dominated by quartzofeldspathic lithologies and a notable absence of voluminous mafic additions to the lower crust. The absence of a deep crustal root, coupled with the bulk intermediate composition inferred for the lower crust from the seismic refraction/wide-angle data, implies that the crust beneath central Newfoundland has undergone multiple periods of reactivation and equilibration following successive orogenic episodes.

Newfoundland and Labrador↗
USGS2008

Aeromagnetic evidence for a buried Early Cretaceous magmatic arc, northeast Japan

Positive aeromagnetic anomalies, recent drilling, and models constructed from these data delineate the plutonic roots of the Early Cretaceous Kitakami magmatic arc in northeast Japan. Buried plutons, mostly offshore, produce belts of positive magnetic anomalies. These anomalies and magnetotelluric data suggest that the plutons form a batholith 70–120 km wide, nearly 800 km long, and 10–15 km thick. The batholith may mark the location of the main Kitakami arc. Most of the exposed Kitakami plutons are 2–20 km in diameter; some are 3 km thick. The small plutons line up along NW trending faults; some may have been satellite vents that tapped into the magma supply of the main arc. The batholithic roots of the main arc now compose almost half of the modern Japan forearc basement. Steep magnetic gradients, offset anomalies, and basin stratigraphy portray extensive faulting of the Kitakami batholith during oblique subduction in the Late Cretaceous and rifting in the Miocene. The eastern boundary of the Kitakami batholith lies between 90 and 140 km west of the modern trench, much closer than the 300-km distance between the active arc and trench. The Early Cretaceous forearc basin and accretionary prism may underlie the modern forearc basin east of the batholith, but clear evidence is lacking. Much of the Early Cretaceous margin, including most of its forearc therefore is missing. How the material was removed is unknown: it could have been strike-slip faulted, eroded by subduction-related processes, or both.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Strain accumulation along the Laguna Salada Fault, Baja California, Mexico

Strain accumulation observed over the 1978–1991 interval in a 30×100 km aperture trilateration network spanning the Laguna Salada fault is described by the principal strain rates 0.101±0.012 strain/yr N80°E±2° and −0.021±0.012 strain/yr N10°W±2°, extension reckoned positive. These strain accumulation rates have been corrected to remove coseismic effects of the nearby 1979 Imperial Valley ( = 6.5), 1980 Victoria (Baja California) ( = 6.4), 1987 Superstition Hills ( = 6.5), and 1987 Elmore Ranch ( = 5.9) earthquakes. The observed strain rates indicate extension at a rate of about 0.08 strain/yr perpendicular to the trend (N35°W) of the Salton trough as well as a right‐lateral tensor shear strain rate 0.05 strain/yr across it. The extension perpendicular to the trough is observed neither farther north near the Salton Sea nor farther south across the Gulf of California. However, Holocene slip on the Laguna Salada fault, about equal parts right‐lateral and normal slip, is consistent with the observed strain accumulation. A simple dislocation model intended to explain the observed strain accumulation as a product of slip at depth on the Laguna Salada fault would require that the fault be listric.

California↗
USGS2012

Seismic refraction measurements within the Peninsular terrane, south central Alaska

We present an interpretation of crustal seismic refraction data from the Peninsular terrane, one of the many exotic terranes that have been accreted to the continental margin of southern Alaska in the past 200 m.y. A seismic refraction line was collected along the Glenn Highway in the Copper River Basin of south central Alaska in 1984 and 1985, as part of the U.S. Geological Survey Trans‐Alaska Crustal Transect (TACT) program. P wave velocities of 2.7–3.5 km/s and thicknesses of 1–2 km characterize post‐Lower Jurassic sedimentary rocks that underlie most of the seismic refraction line. An average crustal velocity structure includes the following five velocity divisions. Beneath the sedimentary rocks lie 1–2 km of 4.0–4.6 km/s materials, correlating with andesitic volcaniclastic sedimentary rocks and lava flows of the Lower Jurassic Talkeetna Formation. Below these rocks, seismic velocity increases rapidly, from 5.0 to 6.1 km/s, in 2–3 km. At 7–8 km depth, velocity jumps to 6.3 km/s and increments to 6.6 km/s by 10–12 km depth. Velocities increase from 6.8 to 7.0 km/s between 12 to 20 km depth. At about 22 km depth, a jump in velocity from 7.0 to 7.4 km/s is inferred but is poorly resolved. Depth to the Moho discontinuity could not be determined from our data. The absence of clear PmP reflections may indicate that Moho is deeper than 40 km. Data from two offset shotpoints northeast of the line and within the Wrangellia terrane constrain the deep structure transition between Peninsular and Wrangellia terranes. The 6.3–6.6 km/s material thickens to the northeast, toward the suture between Peninsular and Wrangellia terranes, but southwest of its mapped trace at the West Fork fault. Peninsular terrane crustal structure appears dissimilar to that of continental interiors. It is similar to velocity structures determined for accreted island arc fragments in California, such as the basement of the Great Valley and the Klamath Mountains.

Alaska↗
USGS2012

Three-dimensional modeling of pull-apart basins: implications for the tectonics of the Dead Sea Basin

We model the three-dimensional (3-D) crustal deformation in a deep pull-apart basin as a result of relative plate motion along a transform system and compare the results to the tectonics of the Dead Sea Basin. The brittle upper crust is modeled by a boundary element technique as an elastic block, broken by two en echelon semi-infinite vertical faults. The deformation is caused by a horizontal displacement that is imposed everywhere at the bottom of the block except in a stress-free &ldquo;shear zone&rdquo; in the vicinity of the fault zone. The bottom displacement represents the regional relative plate motion. Results show that the basin deformation depends critically on the width of the shear zone and on the amount of overlap between basin-bounding faults. As the width of the shear zone increases, the depth of the basin decreases, the rotation around a vertical axis near the fault tips decreases, and the basin shape (the distribution of subsidence normalized by the maximum subsidence) becomes broader. In contrast, two-dimensional plane stress modeling predicts a basin shape that is independent of the width of the shear zone. Our models also predict full-graben profiles within the overlapped region between bounding faults and half-graben shapes elsewhere. Increasing overlap also decreases uplift near the fault tips and rotation of blocks within the basin. We suggest that the observed structure of the Dead Sea Basin can be described by a 3-D model having a large overlap (more than 30 km) that probably increased as the basin evolved as a result of a stable shear motion that was distributed laterally over 20 to 40 km.

Dead Sea Basin↗
USGS2012

Relation of peralkaline magmatism to heterogeneous extension during the Middle Miocene, southeastern Nevada

Volcanism migrated southward in the northern Basin and Range province in the Oligocene and early Miocene to produce voluminous calcalkaline silicic ash flow tuffs. Alkaline volcanism became dominant by middle Miocene (17–14 Ma) as smaller volumes of rhyolite-trachyte-basalt suites were erupted from the relatively small Kane Springs Wash caldera complex including the Narrow Canyon, Boulder Canyon, and Kane Springs Wash calderas in southeastern Nevada. Only minor extension affected the Kane Wash area before the end of calcalkaline activity, but extension expressed by rate of progressive stratal tilt peaked (15–13.5 Ma) with peralkaline magmatism (14.7–14.4 Ma). Variations in distribution, degree, style, and timing of deformation demonstrate heterogeneous extension in the Kane Wash area. Only minor extension and tilting persisted post-middle Miocene (<12 Ma). All major eruptive sources overlap domains of rapid extension. Most of the eruptive volumes from the two oldest calderas of the complex apparently pooled within their calderas, creating outflow deficits. Denudation faulting associated with magmatic tumescence may have followed preexisting active extensional fault systems to unload magma chambers, thus triggering eruptions into structural depressions. Evolution of alkaline magmas is demonstrated by progressive increases in peralkalinity and high field strength elements such as Zr, Y, and Nb. Nd, Pb, and Sr isotopic compositions provide evidence that significantly less crustal interaction affected middle Miocene peralkaline magmas than pre-middle Miocene calcalkaline magmas. ε Nd values are −5 to −7 for peralkaline magmas and −7 to −11 for calcalkaline magmas; 208 Pb/ 204 Pb ratios are 38.2–38.6 for peralkaline magmas and 38.5–38.9 for calcalkaline magmas. Regional cooling, short duration of magmatism, small volumes of magma, and local extension caused less crustal interaction in peralkaline Kane Wash magmas than in earlier magmas. North of the Kane Wash area, older more voluminous calcalkaline magmas intruded hotter crust for a longer period and thus interacted with the crust to a greater degree in spite of synvolcanic extension.

Journal of Geophysical Research↗
USGS2012

The 40Ar/39Ar ages and tectonic setting of the Middle Eocene northeast Nevada volcanic field

Widespread middle to late Eocene calc-alkalic volcanism, which formed the Northeast Nevada Volcanic Field, marks the earliest Tertiary volcanism in the northern Basin and Range. The central part of this major field in northeast Nevada and adjacent Utah is herein defined by 23 40 Ar/ 39 Ar ages that range from 42.6 to 39.0 Ma, rock chemistry from 12 localities, stratigraphic position of the volcanic rocks above a regional middle Eocene unconformity, volcanic setting, and lithology. The type area is at Nanny Creek, in the northern Pequop Mountains, Nevada, where rhyolite ash flow tuffs are overlain by a thick section of intercalated andesitic to dacitic flows and flow breccias and rhyolite ash flow tuffs. The intermediate composition rocks are locally derived throughout the volcanic field, whereas the sources for rhyolite ash flow tuffs are unknown. The uniform and widespread occurrence of the andesitic and dacitic flows and flow breccias strongly suggests that the upper crust was perforated by intermediate composition magma across the entire region. In the central part of the field the middle Eocene volcanic rocks rest with depositional angular discordance on deformed middle Paleozoic to Triassic strata; ostracode-bearing limestone, probably of early Eocene age, is locally present below the volcanic rocks. In the western and southeastern parts of the field these middle Eocene volcanic rocks rest with depositional angular discordance on lower Eocene lacustrine strata of the Elko and White Sage Formations, respectively. This angular discordance documents a middle Eocene deformational event previously unrecognized in the region.

Journal of Geophysical Research↗