SEARCH · USGS Science

Results for “Economic Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,639 records · Page 91Linked to original sources

USGS2013

Integrated geophysical imaging of a concealed mineral deposit: a case study of the world-class Pebble porphyry deposit in southwestern Alaska

We combined aeromagnetic, induced polarization, magnetotelluric, and gravity surveys as well as drillhole geologic, alteration, magnetic susceptibility, and density data for exploration and characterization of the Cu-Au-Mo Pebble porphyry deposit. This undeveloped deposit is almost completely concealed by postmineralization sedimentary and volcanic rocks, presenting an exploration challenge. Individual geophysical methods primarily assist regional characterization. Positive chargeability and conductivity anomalies are observed over a broad region surrounding the deposit, likely representing sulfide minerals that accumulated during multiple stages of hydrothermal alteration. The mineralized area occupies only a small part of the chargeability anomaly because sulfide precipitation was not unique to the deposit, and mafic rocks also exhibit strong chargeability. Conductivity anomalies similarly reflect widespread sulfides as well as water-saturated glacial sediments. Mineralogical and magnetic susceptibility data indicate magnetite destruction primarily within the Cu-Au-Mo mineralized area. The magnetic field does not show a corresponding anomaly low but the analytic signal does in areas where the deposit is not covered by postmineralization igneous rocks. The analytic signal shows similar lows over sedimentary rocks outside of the mineralized area, however, and cannot uniquely distinguish the deposit. We find that the intersection of positive chargeability anomalies with analytic signal lows, indicating elevated sulfide concentrations but low magnetite at shallow depths, roughly delineates the deposit where it is covered only by glacial sediments. Neither chargeability highs nor analytic signal lows are present where the deposit is covered by several hundred meters of sedimentary and volcanic rocks, but a 3D resistivity model derived from magnetotelluric data shows a corresponding zone of higher conductivity. Gravity data highlight geologic features within the deposit, including shallow diorite sills that locally contain higher-grade mineralization. The results thus show ways in which an integrated survey approach might be used to distinguish zones of potentially economic mineralization.

Alaska↗

USGS1962

Geology and fluorspar deposits of the Levias-Keystone and Dike-Eaton areas, Crittenden County, Kentucky

The fault systems of the Levias-Keystone and Dike-Eaton areas, in the Kentucky-Illinois fiuorspar district, are a complex northeastward-trending sys- tem and a simple northwestward-trending system of steeply dipping normal faults, associated in part with a lamprophyre dike. Fluorspar mining started in the area about 1900 and, as of 1945, more than 200,000 tons of crude ore probably has been mined; most of the ore was from the Levias-Keystone area. A small quantity of zinc and lead ore also is present in the Dike-Eaton area. The deposits are localized along faults that displace fiat-lying or low-dipping limestones, sandstones, and shales of the Meramec and Chester series of Missis- sippian age. Movement along most of the faults was principally vertical, with displacement as much as 600 feet. Some horizontal movement occurred along at least one fault. Geologic mapping of the surface and data from underground workings have revealed 13 faults in an area of four-fifths of a square mile. Only a few of these faults are known to contain economically important deposits of fiuorspar. The most abundant vein minerals are calcite and fiuorite with subordinate quantities of sphalerite, galena, barite, and quartz. Some weathering products of sphalerite and galena are present also. The veins are dominantly calcite that contains fiuorite lenses but in places are mainly fiuorite having lesser quantities of calcite. Sphalerite- and galena-bearing deposits are present in the Dike-Eaton area. The ore bodies mainly are the result of fissure filling and replacement of calcite by fiuorite; in addition a small amount of limestone wallrock probably has been replaced. Residual concentrations of high-grade fluorspar in the overburden above faults have yielded some so-called gravel fiuorspar. The position of the veins within the faults may be related to one or more factors such as type of wallrock, change in dip of the fault, and amount of displacement.

Kentucky↗

USGS2008

The ShakeOut Earthquake Scenario— A story that southern Californians are writing

The question is not if but when southern California will be hit by a major earthquake - one so damaging that it will permanently change lives and livelihoods in the region. How severe the changes will be depends on the actions that individuals, schools, businesses, organizations, communities, and governments take to get ready. To help prepare for this event, scientists of the U.S. Geological Survey (USGS) have changed the way that earthquake scenarios are done, uniting a multidisciplinary team that spans an unprecedented number of specialties. The team includes the California Geological Survey, Southern California Earthquake Center, and nearly 200 other partners in government, academia, emergency response, and industry, working to understand the long-term impacts of an enormous earthquake on the complicated social and economic interactions that sustain southern California society. This project, the ShakeOut Scenario, has applied the best current scientific understanding to identify what can be done now to avoid an earthquake catastrophe. More information on the science behind this project will be available in The ShakeOut Scenario (USGS Open-File Report 2008-1150; http://pubs.usgs.gov/of/2008/1150/). The 'what if?' earthquake modeled in the ShakeOut Scenario is a magnitude 7.8 on the southern San Andreas Fault. Geologists selected the details of this hypothetical earthquake by considering the amount of stored strain on that part of the fault with the greatest risk of imminent rupture. From this, seismologists and computer scientists modeled the ground shaking that would occur in this earthquake. Engineers and other professionals used the shaking to produce a realistic picture of this earthquake's damage to buildings, roads, pipelines, and other infrastructure. From these damages, social scientists projected casualties, emergency response, and the impact of the scenario earthquake on southern California's economy and society. The earthquake, its damages, and resulting losses are one realistic outcome, deliberately not a worst-case scenario, rather one worth preparing for and mitigating against. Decades of improving the life-safety requirements in building codes have greatly reduced the risk of death in earthquakes, yet southern California's economic and social systems are still vulnerable to large-scale disruptions. Because of this, the ShakeOut Scenario earthquake would dramatically alter the nature of the southern California community. Fortunately, steps can be taken now that can change that outcome and repay any costs many times over. The ShakeOut Scenario is the first public product of the USGS Multi-Hazards Demonstration Project, created to show how hazards science can increase a community's resiliency to natural disasters through improved planning, mitigation, and response.

California↗

USGS1976

Spectrographic and chemical analyses of geochemical samples from the McCarthy Quadrangle, Alaska

As an integral part of the Alaskan Mineral Resource Assessment Program, a geochemical reconnaissance survey was conducted in the McCarthy quadrangle during the summer of 1974. The investigation consisted of geochemical sampling, multielement chemical and spectrographic analyses, compilation of new and existing geochemical data, statistical evaluation of the total data set, and the generation of element distribution and abundance maps. The purpose of the survey was to define areas in the quadrangle that contain anomalous concentrations of metallic and nonmetallic elements. These studies are fundamental to a comprehensive evaluation of the mineral resource potential of the area and to assist in the discovery of additional economic mineral deposits. The first-large scale geochemical sampling and analytical surveys were initiated in the McCarthy quadrangle in the early 1960's with the inception of the Wrangell Mountain project by the U.S. Geological Survey. Since that time, levels of activity in geochemical sampling in the quadrangle have fluctuated. Each year, many geochemical samples have been collected concomitantly with geologic mapping, and was culminated under the Alaskan Minerals Resource Assessment Program 1974.

Alaska↗

USGS1986

Annual summary of ground-water conditions in Arizona, spring 1984 to spring 1985

In arid and semiarid regions such as Arizona, the availability of adequate water supplies has a significant influence on the type and extent of economic development. About two-thirds of the water used in the State is groundwater. The nature and extent of the groundwater reservoirs must be known for proper management of this valuable resource. The U.S. Geological Survey, in cooperation with the State of Arizona, has conducted a program of groundwater studies in Arizona since 1939. The primary purposes of these studies are to define the amount, location, and quality of the groundwater resources of Arizona and to monitor the effects of large-scale development of the groundwater supplies. The program includes the collection, compilation, and analysis of the geologic and hydrologic data necessary to evaluate the groundwater resources of the State. The basic hydrologic data are in computer storage and are available to the public. Since 1974, a major thrust of the program has been to inventory the groundwater conditions in the 68 groundwater areas of the State. Several selected groundwater areas are studied each year; water levels are measured annually in a statewide observation well network, many groundwater samples are collected and analyzed annually, and groundwater pumpage is computed for most of the areas. As of July 1985, reports had been published for 56 of the 68 groundwater areas. Data collected in the groundwater areas include information on selected wells, water level measurements, and water samples for chemical analysis. The data for each of the selected groundwater areas are analyzed, and the results are published in map form. Typically, the maps show depth to water; change in water levels; altitude of the water level; and quality of water data, such as specific conductance, dissolved solids, and fluoride. (Lantz-PTT)

Arizona↗

USGS2015

Numerical simulation of groundwater flow, resource optimization, and potential effects of prolonged drought for the Citizen Potawatomi Nation Tribal Jurisdictional Area, central Oklahoma

A hydrogeological study including two numerical groundwater-flow models was completed for the Citizen Potawatomi Nation Tribal Jurisdictional Area of central Oklahoma. One numerical groundwater-flow model, the Citizen Potawatomi Nation model, encompassed the jurisdictional area and was based on the results of a regional-scale hydrogeological study and numerical groundwater flow model of the Central Oklahoma aquifer, which had a geographic extent that included the Citizen Potawatomi Nation Tribal Jurisdictional Area. The Citizen Potawatomi Nation numerical groundwater-flow model included alluvial aquifers not in the original model and improved calibration using automated parameter-estimation techniques. The Citizen Potawatomi Nation numerical groundwater-flow model was used to analyze the groundwater-flow system and the effects of drought on the volume of groundwater in storage and streamflow in the North Canadian River. A more detailed, local-scale inset model was constructed from the Citizen Potawatomi Nation model to estimate available groundwater resources for two Citizen Potawatomi Nation economic development zones near the North Canadian River, the geothermal supply area and the Iron Horse Industrial Park. Groundwater pumping rates at potential well locations were optimized using the most recent version of the U.S. Geological Survey Groundwater-Management Process for MODFLOW. The objectives of optimization were to determine if a total pumping rate of 500 gallons per minute could be pumped from 5 wells at the geothermal supply area and to maximize discharge from 16 wells at the Iron Horse Industrial Park without exceeding specified head drawdown constraints at the pumping wells and thus prevent groundwater depletion. The inset model was used to estimate North Canadian River streamflow depletion caused by optimized pumping at the Iron Horse Industrial Park because water quality was a concern, and the river may have degraded water quality compared to water in other parts of the alluvial aquifer. The fate of streamflow that infiltrates into groundwater because of pumping was not directly determined, but it was assumed that this water could end up in the well discharge, and was considered to be a maximum proportion of well discharge derived from the North Canadian River. The total optimized continuous pumping rate from five managed wells at the geothermal supply area was 638 gallons per minute, which exceeded the target pumping rate of 500 gallons per minute. The total continuous pumping rate from 16 wells at the Iron Horse Industrial Park was 1,472 gallons per minute, which induced stream infiltration of approximately 4.1 gallons per minute (approximately 0.3 percent of the total well discharge) from the North Canadian River. To estimate the effects of drought on water resources in the Citizen Potawatomi Nation Tribal Jurisdictional Area, a hypothetical 10-year drought during which precipitation would decrease by 50 percent was simulated by decreasing model groundwater recharge by the same proportion for the period 1990–2000 of the transient model. The effects of the drought were estimated by calculating the change in the volume of groundwater storage and groundwater flow to streams at the end of the drought period, and the change in simulated streamflow in the North Canadian River at the streamflow-gaging station at Shawnee, Okla., during and after the drought. The hypothetical decrease in recharge during the simulated drought caused groundwater in storage over the entire model in the study area to decrease by 361,500 acre-feet (14,100 acre-feet in the North Canadian River alluvial aquifer and 347,400 acre-feet in the Central Oklahoma aquifer), or approximately 0.2 percent of the total groundwater in storage over the drought period. This small percentage of groundwater loss showed that the Central Oklahoma aquifer as a bedrock aquifer has relatively low rates of recharge from the surface relative to the approximate storage. The budget for base flow to the North Canadian River indicated that the change in groundwater flow to the North Canadian River decreased during the 10-year drought by 386,500 acre-feet, or 37 percent. In all other parts of the Citizen Potawatomi Nation Tribal Jurisdictional Area, base flow decreased by 292,000 acre-feet, or 28 percent. Streamflow in the North Canadian River at the streamflow-gaging station at Shawnee, Okla., decreased during the hypothetical drought by as much as 28 percent, and the mean change in streamflow decreased as much as 16 percent. Streamflow at the Shawnee streamflow-gaging station did not recover to nondrought conditions until about 3 years after the simulated drought ended, during the relatively wet year of 2007.

Oklahoma↗

USGS1981

Some thoughts on cartographic and geographic information systems for the 1980's

The U.S. Geological Survey is adopting computer techniques to meet the expanding need for cartographic base category data. Digital methods are becoming increasingly important in the mapmaking process, and the demand is growing for physical, social, and economic data. Recognizing these emerging needs, the National Mapping Division began, several years ago, an active program to develop advanced digital methods to support cartographic and geographic data processing. An integrated digital cartographic database would meet the anticipated needs. Such a database would contain data from various sources, and could provide a variety of standard and customized map and digital data file products. This cartographic database soon will be technologically feasible. The present trends in the economics of cartographic and geographic data handling and the growing needs for integrated physical, social, and economic data make such a database virtually mandatory.

Pecora VII Symposium↗

USGS1946

Ground-water level fluctuations in Utah, 1936-45

Ground-water investigations in Utah by the Geological Survey of the U.S. Department of the Interior have been in progress since 1935, in cooperation with the Utah State Engineer. This cooperative work includes (1) determination of the fluctuations of water level in most of the developed ground-water areas in the state, based upon measurements which are tabulated and published annually by the Geological Survey; and (2) detailed investigations of specific ground-water areas to determine source, movement, disposal, quantity and quality of the ground water, and to show the relation of present development to the maximum economic development of which those areas are capable. Such detailed investigations have been completed during the past decade for areas in Iron, Millard, Salt Lake, Tooele, and Weber Counties, and are referred to in discussion subsequently. Similar investigations are now in progress in other areas in Davis, Iron, and Weber Counties.

Utah↗

USGS1971

Geochemical, aeromagnetic, and generalized geologic maps showing distribution and abundance of lead and silver, Golconda and Iron Point quadrangles, Humboldt County, Nevada

Detailed geologic and geochemical studies of the four 7 1/2-minute quadrangles that make up the Edna Mountain 15-minute quadrangle in Humboldt County, Nevada, were begun during the 1969 summer field season. The objectives of the project are to map the geology of this struct urally complex area at 1:24·,000 scale and to determine the regional distribution and abundance of metals in rocks of the are\3. and the factors that control the distribution and abundance of those metals. Tungstenbearing hot-spring tufa, metalliferous black shale in Ordovician rocks, base-metal and barite deposits in Paleozoic sedimentary rocks, and copper-molybdenum in granodiorite plutons of Cretaceous age occur in the Edna Mountain area. None of these deposits have been of much economic significance, although tungsten was mined from the hot-spring deposits during World War II. The numerous occurrences of mineralized ground, however, along with the broad spectrum of types of mineralization, intensity of alteration, structural complexity, and abundance of intermediate to silicic igneous intrusive rocks suggest that concealed or heretofore unrecognized mineral deposits may exist in the area. Integrated geologic, geochemical, and geophysical studies on a district- wide scale might improve our un~erstanding of the factors that control the distribution, methods of emplacement, and spatial and genetic relationships (if any) of these different types of deposits. We hope that broad target areas or guidelines for mineral exploration in th.is area may be identified. This series of maps shows the distribu t ion and abundance of mercury, arsenic, antimony, tungsten, gold, copper, l ead, and s ilver related to a geologic and aeromagnetic base in the Golconda and Iron Point 7 1/2-minute quadrangles. All samples are rock samples; most are f rom shear or f ault zones, fractures, jasperoid, breccia reefs, and altered rocks . All the samples were prepared and analyzed in truck-mounted laboratories at Wi nnemucca, Nevada. Arsenic , tungs t en, copper, lead, and si lver were determined by semiquantitative spectrogr aph i c methods by D. F. Siems and E. F. Cooley . Mercury and gold were determined by atomi c absorption methods and antimony was determined by a colorimetric method by R. M. O'Leary, M. S. Erickson, and others.

Nevada↗

USGS1972

Geochemical, aeromagnetic, and generalized geologic maps showing distribution and abundance of molybdenum and zinc, Golconda and Iron Point quadrangles, Humboldt County, Nevada

Detailed geologic and geochemical studies of the four 7½-minute quadrangles that make up the Edna Mountain 15-minute quadrangle in Humboldt County, Nevada, were begun during the 1969 summer field season. The objectives of the project are to map the geology of this structurally complex area at 1:24,000 scale and to determine the regional distribution and abundance of metals in rocks of the area and the factors that control the distribution and abundance of those metals. Tungsten-bearing hot-spring tufa, metalliferous black shale in Ordovician rocks, base-metal and barite deposits in Paleozoic sedimentary rocks, and copper-molybdenum in granodiorite pultons of Cretaceous age occur in the Edna Mountain area. None of these deposits have been of much economic significance, although tungsten was mined for the hot-spring deposits during World War II. The numerous occurrences of mineralized ground, however, along with the broad spectrum of types of mineralization, intensity of alteration, structural complexity, and abundance of intermediate to silicic igneous intrusive rocks suggest that concealed or heretofore unrecognized mineral deposits may exist in the area. Integrated geologic, geochemical, and geophysical studies on a district-wide scale might improve our understanding of the factors that control the distribution, methods of emplacement, and spatial and genetic relationships (if any) of these different types of deposits. We hope that broad target areas or guidelines for mineral exploration in this area may be identified. This series of maps shows the distribution and abundance of mercury, arsenic, antimony, tungsten, gold, copper, lead, and silver related to a geologic and aeromagnetic base in the Golconda and Iron Point 7½-minute quadrangles. All samples are rock samples; most are from shear or fault zones, fractures, jasperoid, breccia reefs, and altered rocks. All the samples were prepared and analyzed in truck-mounted laboratories at Winnemucca, Nevada. Arsenic, tungsten, copper, lead, and silver were determined by semiquantitative spectrographic methods by D.F. Siems and E.F. Cooley. Mercury and gold were determined by atomic absorption methods and antimony was determined by wet chemical methods by R.M. O'Leary, M.S. Erickson, and others.

Nevada↗

USGS2025

Geothermal potential of orphan oil and gas wells

The United States is estimated to have hundreds of thousands of orphan oil and gas wells. Orphan wells are abandoned wells that are both unremediated and have no responsible operator. While traditionally considered environmental and economic liabilities, orphan oil and gas wells may offer new opportunities in sustainable geothermal energy development. This study evaluates the potential of repurposing orphan wells for geothermal energy production. We analyzed more than 1.4 million bottom-hole temperature (BHT) records from oil and gas well logs to create corrected temperature-depth profiles in a grid across the United States. Total depth values, where available, in documented orphan wells from a U.S. Geological Survey (USGS) database were then correlated to these temperature-depth profiles to estimate a corrected BHT for each orphan well. The orphan wells were then categorized as having low (<90°C), moderate (90–150°C), and high (>150°C) geothermal potential, identifying them as wells in the U.S. that could be used to access geothermal resources. In addition, repurposing these wells could contribute to broader environmental and economic goals, including well remediation, rogue methane emissions reduction, and energy production. This study provides a framework for integrating inactive well inventories with geothermal resource assessments and further highlights the potential for orphan wells to play a transformative role in expanding geothermal energy capacity in the United States.

contiguous United States↗

USGS2014

Great Lakes restoration success through science: U.S. Geological Survey accomplishments 2010 through 2013

The Great Lakes (Superior, Michigan, Huron, Erie, and Ontario) are the largest group of freshwater lakes on Earth and serve as an important source of drinking water, transportation, power, and recreational opportunities for the United States and Canada. They also support an abundant commercial and recreational fishery, are crucial for agriculture, and are essential to the economic vitality of the region. The Great Lakes support a wealth of biological diversity, including over 200 globally rare plants and animals and more than 40 species that are found nowhere else in the world. However, more than a century of environmental degradation has taken a substantial toll on the Great Lakes. To stimulate and promote the goal of a healthy Great Lakes region, President Obama and Congress created the Great Lakes Restoration Initiative (GLRI) in 2009. The GLRI is an interagency collaboration that seeks to address the most significant environmental problems in the Great Lakes ecosystem. The GLRI is composed of five focus areas that address these issues: Cleaning up toxic substances and Areas of Concern, Preventing and controlling invasive species, Promoting nearshore health, Protecting and restoring habitat and wildlife, Tracking progress and working with partners. As of August 2013, the GLRI had funded more than 1,500 projects and programs of the highest priority to meet immediate cleanup, restoration, and protection needs. These projects use scientific analyses as the basis for identifying the restoration needs and priorities for the GLRI. Results from the science, monitoring, and other on-the-ground actions by the U.S. Geological Survey (USGS) provide the scientific information needed to help guide the Great Lakes restoration efforts. This document highlights a selection of USGS projects for each of the five focus areas through 2013, demonstrating the importance of science for restoration success. Additional information for these and other USGS projects that are important for Great Lakes restoration is available at http://cida.usgs.gov/glri/glri-catalog/ .

Great Lakes↗

USGS2023

Rapid characterization of the February 2023 Kahramanmaraş, Turkey, earthquake sequence

The 6 February 2023 M w "> M w 7.8 Pazarcık and subsequent M w "> M w 7.5 Elbistan earthquakes generated strong ground shaking that resulted in catastrophic human and economic loss across south‐central Türkiye and northwest Syria. The rapid characterization of the earthquakes, including their location, size, fault geometries, and slip kinematics, is critical to estimate the impact of significant seismic events. The U.S. Geological Survey National Earthquake Information Center (NEIC) provides real‐time monitoring of earthquakes globally, including rapid source characterization and impact estimates. Here, we describe the seismic characterization products generated and made available by the NEIC over the two weeks following the start of the earthquake sequence in southeast Türkiye, their evolution, and how they inform our understanding of regional seismotectonics and hazards. The kinematics of rupture for the two earthquakes was complex, involving multiple fault segments. Therefore, incorporating observations from rupture mapping was critical for characterizing these events. Dense local datasets facilitated robust source characterization and impact assessment once these observations were obtained and converted to NEIC product input formats. We discuss how we may improve the timeliness of NEIC products for rapid assessment of future seismic hazards, particularly in the case of complex ruptures.

The Seismic Record↗

USGS1933

The bleaching clays

Groundwater is one of Utah 's most extensive and valuable natural resources. Because of its widespread occurrence in both wet and dry areas, groundwater has been, and is a major factor affecting economic growth and development of the State. In some areas, groundwater is used to supplement streamflow for irrigation, public supply, and other uses. In other areas, it is the only water available for use. The U.S. Geological Survey, under cooperative programs with the Utah Department of Natural Resources and other Federal, State, and local agencies has been studying Utah 's groundwater resources since 1987. Much information has been gained during those studies about the occurrence, availability, and quality of groundwater; the withdrawal and use of the water; and the effects of withdrawal. This report summarizes that information in nontechnical language , which is designed for all readers. (Lantz-PTT)

Circular↗

USGS2007

Peru Mercury Inventory 2006

In 2004, a specific need for data on mercury use in South America was indicated by the United Nations Environmental Programme-Chemicals (UNEP-Chemicals) at a workshop on regional mercury pollution that took place in Buenos Aires, Argentina. Mercury has long been mined and used in South America for artisanal gold mining and imported for chlor-alkali production, dental amalgam, and other uses. The U.S. Geological Survey (USGS) provides information on domestic and international mercury production, trade, prices, sources, and recycling in its annual Minerals Yearbook mercury chapter. Therefore, in response to UNEP-Chemicals, the USGS, in collaboration with the Economic Section of the U.S. Embassy, Lima, has herein compiled data on Peru's exports, imports, and byproduct production of mercury. Peru was selected for this inventory because it has a 2000-year history of mercury production and use, and continues today as an important source of mercury for the global market, as a byproduct from its gold mines. Peru is a regional distributor of imported mercury and user of mercury for artisanal gold mining and chlor-alkali production. Peruvian customs data showed that 22 metric tons (t) of byproduct mercury was exported to the United States in 2006. Transshipped mercury was exported to Brazil (1 t), Colombia (1 t), and Guyana (1 t). Mercury was imported from the United States (54 t), Spain (19 t), and Kyrgyzstan (8 t) in 2006 and was used for artisanal gold mining, chlor-alkali production, dental amalgam, or transshipment to other countries in the region. Site visits and interviews provided information on the use and disposition of mercury for artisanal gold mining and other uses. Peru also imports mercury-containing batteries, electronics and computers, fluorescent lamps, and thermometers. In 2006, Peru imported approximately 1,900 t of a wide variety of fluorescent lamps; however, the mercury contained in these lamps, a minimum of approximately 76 kilograms (kg), and in other products such as batteries and computer electronics is not recycled and may ultimately be released to the environment.

Open-File Report↗

USGS2008

The ShakeOut Scenario

This is the initial publication of the results of a cooperative project to examine the implications of a major earthquake in southern California. The study comprised eight counties: Imperial, Kern, Los Angeles, Orange, Riverside, San Bernardino, San Diego, and Ventura. Its results will be used as the basis of an emergency response and preparedness exercise, the Great Southern California ShakeOut, and for this purpose we defined our earthquake as occurring at 10:00 a.m. on November 13, 2008. As members of the southern California community use the ShakeOut Scenario to plan and execute the exercise, we anticipate discussion and feedback. This community input will be used to refine our assessment and will lead to a formal publication in early 2009. Our goal in the ShakeOut Scenario is to identify the physical, social and economic consequences of a major earthquake in southern California and in so doing, enable the users of our results to identify what they can change now?before the earthquake?to avoid catastrophic impact after the inevitable earthquake occurs. To do so, we had to determine the physical damages (casualties and losses) caused by the earthquake and the impact of those damages on the region?s social and economic systems. To do this, we needed to know about the earthquake ground shaking and fault rupture. So we first constructed an earthquake, taking all available earthquake research information, from trenching and exposed evidence of prehistoric earthquakes, to analysis of instrumental recordings of large earthquakes and the latest theory in earthquake source physics. We modeled a magnitude (M) 7.8 earthquake on the southern San Andreas Fault, a plausible event on the fault most likely to produce a major earthquake. This information was then fed forward into the rest of the ShakeOut Scenario. The damage impacts of the scenario earthquake were estimated using both HAZUS-MH and expert opinion through 13 special studies and 6 expert panels, and fall into four categories: building damages, non-structural damages, damage to lifelines and infrastructure, and fire losses. The magnitude 7.8 ShakeOut earthquake is modeled to cause about 1800 deaths and $213 billion of economic losses. These numbers are as low as they are because of aggressive retrofitting programs that have increased the seismic resistance of buildings, highways and lifelines, and economic resiliency. These numbers are as large as they are because much more retrofitting could still be done. The earthquake modeled here may never happen. Big earthquakes on the San Andreas Fault are inevitable, and by geologic standards extremely common, but probably will not be exactly like this one. The next very damaging earthquake could easily be on another fault. However, lessons learned from this particular event apply to many other events and could provide benefits in many possible future events.

Open-File Report↗

USGS1980

Bibliography of fine-grained siliceous deposits

This bibliography was compiled under the auspices of the International Geologic Correlations Project's (IGCP) Research Group 115, "Siliceous Deposits of the Pacific Region"; IGCP is sponsored by UNESCO and the International Union of Geological Sciences (IUGS). Research Group 115 was originally proposed to IGCP in 1974 by Professor Azuma Iijima, University of Tokyo, and is now headed by James R. Hein, U.S. Geological Survey. Cooperative efforts by 86 members from 17 countries help in accomplishing Research Group 115's objectives of correlating sedimentary processes of siliceous deposits in the Pacific Basin and neighboring geosynclinal areas by means of stratigraphy, sedimentology, geochemisty, and paleontology. These correlations will allow us to estimate the geochemical silica budget in the Earth's crust; to estimate the production of silica in the marine environment through geologic time; to formulate a general rule on sedimentation of siliceous deposits in geosynclines; to increase understanding of the development of circum-Pacific orogenic belts; and to obtain basic methods to evaluate siliceous deposits of economic interest. The group agreed to focus on fine-grained siliceous deposits (cherts, siliceous shales, diatomites, and the like) and to exclude quartz sand deposits and quartzose sandstones.

Open-File Report↗

USGS2014

Occurrence model for magmatic sulfide-rich nickel-copper-(platinum-group element) deposits related to mafic and ultramafic dike-sill complexes

Magmatic sulfide deposits containing nickel (Ni) and copper (Cu), with or without (±) platinum-group elements (PGE), account for approximately 60 percent of the world’s nickel production. Most of the remainder of the Ni production is derived from lateritic deposits, which form by weathering of ultramafic rocks in humid tropical conditions. Magmatic Ni-Cu±PGE sulfide deposits are spatially and genetically related to bodies of mafic and/or ultramafic rocks. The sulfide deposits form when the mantle-derived mafic and/or ultramafic magmas become sulfide-saturated and segregate immiscible sulfide liquid, commonly following interaction with continental crustal rocks. Deposits of magmatic Ni-Cu sulfides occur with mafic and/or ultramafic bodies emplaced in diverse geologic settings. They range in age from Archean to Tertiary, but the largest number of deposits are Archean and Paleoproterozoic. Although deposits occur on most continents, ore deposits (deposits of sufficient size and grade to be economic to mine) are relatively rare; major deposits are present in Russia, China, Australia, Canada, and southern Africa. Nickel-Cu sulfide ore deposits can occur as single or multiple sulfide lenses within mafic and/or ultramafic bodies with clusters of such deposits comprising a district or mining camp. Typically, deposits contain ore grades of between 0.5 and 3 percent Ni and between 0.2 and 2 percent Cu. Tonnages of individual deposits range from a few tens of thousands to tens of millions of metric tons (Mt) bulk ore. Two giant Ni-Cu districts, with ≥10 Mt Ni, dominate world Ni sulfide resources and production. These are the Sudbury district, Ontario, Canada, where sulfide ore deposits are at the lower margins of a meteorite impact-generated igneous complex and contain 19.8 Mt Ni; and the Noril’sk-Talnakh district, Siberia, Russia, where the ore deposits are in subvolcanic mafic intrusions related to flood basalts and contain 23.1 Mt Ni. In the United States, the Duluth Complex in Minnesota, comprised of a group of mafic intrusions related to the 1.1 Ga Midcontinent Rift system, represents a major Ni resource of 8 Mt Ni, but deposits generally exhibit low grades (0.2 percent Ni, 0.66 percent Cu) and remain in the process of being proven economic. The sulfides in magmatic Ni-Cu deposits generally constitute a small volume of the host rock(s) and tend to be concentrated in the lower parts of the mafic and/or ultramafic bodies, often in physical depressions or areas marking changes in the geometry of the footwall topography. In most deposits, the sulfide mineralization can be divided into disseminated, matrix or net, and massive sulfide, depending on a combination of the sulfide content of the rock and the silicate texture. The major Ni-Cu sulfide mineralogy typically consists of an intergrowth of pyrrhotite (Fe 7 S 8 ), pentlandite ([Fe, Ni] 9 S 8 ), and chalcopyrite (FeCuS 2 ). Cobalt, PGE, and gold (Au) are extracted from most magmatic Ni-Cu ores as byproducts, although such elements can have a significant impact on the economics in some deposits, such as the Noril’sk-Talnakh deposits, which produce much of the world’s palladium. In addition, deposits may contain between 1 and 15 percent magnetite associated with the sulfides.

Scientific Investigations Report↗