SEARCH · USGS Science

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90Linked to original sources

USGS2020

Positional accuracy assessment of lidar point cloud from NAIP/3DEP pilot project

The Leica Geosystems CountryMapper hybrid system has the potential to collect data that satisfy the U.S. Geological Survey (USGS) National Geospatial Program (NGP) and 3D Elevation Program (3DEP) and the U.S. Department of Agriculture (USDA) National Agriculture Imagery Program (NAIP) requirements in a single collection. This research will help 3DEP determine if this sensor has the potential to meet current and future 3DEP topographic lidar collection requirements. We performed an accuracy analysis and assessment on the lidar point cloud produced from CountryMapper. The boresighting calibration and co-registration by georeferencing correction based on ground control points are assumed to be performed by the data provider. The scope of the accuracy assessment is to apply the following variety of ways to measure the accuracy of the delivered point cloud to obtain the error statistics. Intraswath uncertainty from a flat surface was computed to evaluate the point cloud precision. Intraswath difference between opposite scan directions and the interswath overlap difference were evaluated to find boresighting or any systematic errors. Absolute vertical accuracy over vegetated and non-vegetated areas were also assessed. Both horizontal and vertical absolute errors were assessed using the 3D absolute error analysis methodology of comparing conjugate points derived from geometric features. A three-plane feature makes a single unique intersection point. Intersection points were computed from ground-based lidar and airborne lidar point clouds for comparison. The difference between two intersection points form one error vector. The geometric feature-based error analysis was applied to intraswath, interswath, and absolute error analysis. The CountryMapper pilot data appear to satisfy the accuracy requirements suggested by the USGS lidar specification, based upon the error analysis results. The focus of this research was to demonstrate various conventional accuracy measures and novel 3D accuracy techniques using two different error computation methods on the CountryMapper airborne lidar point cloud.

Remote Sensing↗

USGS2020

QCam: sUAS-based doppler radar for measuring river discharge

The U.S. Geological Survey is actively investigating remote sensing of surface velocity and river discharge (discharge) from satellite-, high altitude-, small, unmanned aircraft systems- (sUAS or drone), and permanent (fixed) deployments. This initiative is important in ungaged basins and river reaches that lack the infrastructure to deploy conventional streamgaging equipment. By coupling alternative discharge algorithms with sensors capable of measuring surface velocity, streamgage networks can be established in regions where data collection was previously impractical or impossible. To differentiate from satellite or high-altitude platforms, near-field remote sensing is conducted from sUAS or fixed platforms. QCam is a Doppler (velocity) radar mounted and integrated on a 3DR © Solo sUAS. It measures the along-track surface velocity by spot dwelling in a river cross section at a vertical where the maximum surface velocity is recorded. The surface velocity is translated to a mean-channel (mean) velocity using the probability concept (PC), and discharge is computed using the PC-derived mean velocity and cross-sectional area. Factors including surface-scatterer quality, flight altitude, propwash, wind drift, and sample duration may affect the radar-returns and the subsequent computation of mean velocity and river discharge. To evaluate the extensibility of the method, five science flights were conducted on four rivers of varying size and dynamics and included the Arkansas River, Colorado (CO), USA (two events); Salcha River near Salchaket, Alaska (AK), USA; South Platte River, CO, USA; and the Tanana River, AK, USA. QCam surface velocities and river discharges were compared to conventional streamgaging methods, which represented truth. QCam surface velocities for the Arkansas River, Salcha River, South Platte River, and Tanana River were 1.02 meters per second (m/s) and 1.43 m/s; 1.58 m/s; 0.90 m/s; and 2.17 m/s, respectively. QCam discharges (and percent differences) were 9.48 (0.3%) and 20.3 cubic meters per second (m 3 /s) (2.5%); 62.1 m 3 /s (−10.4%); 3.42 m 3 /s (7.3%), and 1579 m 3 /s (−18.8%). QCam results compare favorably with conventional streamgaging and are a viable near-field remote sensing technology that can be operationalized to deliver real-time surface velocity, mean velocity, and river discharge, if cross-sectional area is available.

Remote Sensing↗

USGS2021

Sea state from single optical images: A methodology to derive wind-generated ocean waves from cameras, drones and satellites

Sea state is a key variable in ocean and coastal dynamics. The sea state is either sparsely measured by wave buoys and satellites or modelled over large scales. Only a few attempts have been devoted to sea state measurements covering a large domain; in particular its estimation from optical images. With optical technologies becoming omnipresent, optical images offer incomparable spatial resolution from diverse sensors such as shore-based cameras, airborne drones (unmanned aerial vehicles/UAVs), or satellites. Here, we present a standalone methodology to derive the water surface elevation anomaly induced by wind-generated ocean waves from optical imagery. The methodology was tested on drone and satellite images and compared against ground truth. The results show a clear dependence on the relative azimuth view angle in relation to the wave crest. A simple correction is proposed to overcome this bias. Overall, the presented methodology offers a practical way of estimating ocean waves for a wide range of applications.

Remote Sensing↗

USGS2021

Comparison of historical water temperature measurements with landsat analysis ready data provisional surface temperature estimates for the Yukon River in Alaska

Water temperature is a key element of freshwater ecological systems and a critical element within natural resource monitoring programs. In the absence of in situ measurements, remote sensing platforms can indirectly measure water temperature over time and space. The Earth Resources Observation and Science (EROS) Center has processed archived Landsat imagery into analysis ready data (ARD), including Level-2 Provisional Surface Temperature (pST) estimates derived from the Landsat 4–5 Thematic Mapper (TM), Landsat 7 Enhanced Thematic Mapper Plus (ETM+), and Landsat 8 Thermal Infrared Sensor (TIRS). We compared in situ measurements of water temperature within the Yukon River in Alaska with 52 instances of pST estimates between June 2014 and September 2020. Agreement was good with an RMSE of 2.25 °C and only a slight negative bias in the estimated mean daily water temperature of −0.47 °C. For the 52 dates compared, the average daily water temperature measured by the USGS streamgage was 11.3 °C with a standard deviation of 5.7 °C. The average daily pST estimate was 10.8 °C with a standard deviation of 6.1 °C. At least in the case of large unstratified rivers in Alaska, ARD pST can be used to infer water temperature in the absence of or in tandem with ground-based water temperature monitoring campaigns.

Alaska↗

USGS2021

Evaluation of SWIR crop residue bands for the Landsat Next mission

This research reports the findings of a Landsat Next expert review panel that evaluated the use of narrow shortwave infrared (SWIR) reflectance bands to measure ligno-cellulose absorption features centered near 2100 and 2300 nm, with the objective of measuring and mapping non-photosynthetic vegetation (NPV), crop residue cover, and the adoption of conservation tillage practices within agricultural landscapes. Results could also apply to detection of NPV in pasture, grazing lands, and non-agricultural settings. Currently, there are no satellite data sources that provide narrowband or hyperspectral SWIR imagery at sufficient volume to map NPV at a regional scale. The Landsat Next mission, currently under design and expected to launch in the late 2020’s, provides the opportunity for achieving increased SWIR sampling and spectral resolution with the adoption of new sensor technology. This study employed hyperspectral data collected from 916 agricultural field locations with varying fractional NPV, fractional green vegetation, and surface moisture contents. These spectra were processed to generate narrow bands with centers at 2040, 2100, 2210, 2260, and 2230 nm, at various bandwidths, that were subsequently used to derive 13 NPV spectral indices from each spectrum. For crop residues with minimal green vegetation cover, two-band indices derived from 2210 and 2260 nm bands were top performers for measuring NPV (R 2 = 0.81, RMSE = 0.13) using bandwidths of 30 to 50 nm, and the addition of a third band at 2100 nm increased resistance to atmospheric correction residuals and improved mission continuity with Landsat 8 Operational Land Imager Band 7. For prediction of NPV over a full range of green vegetation cover, the Cellulose Absorption Index, derived from 2040, 2100, and 2210 nm bands, was top performer (R 2 = 0.77, RMSE = 0.17), but required a narrow (≤20 nm) bandwidth at 2040 nm to avoid interference from atmospheric carbon dioxide absorption. In comparison, broadband NPV indices utilizing Landsat 8 bands centered at 1610 and 2200 nm performed poorly in measuring fractional NPV (R 2 = 0.44), with significantly increased interference from green vegetation.

Remote Sensing↗

USGS2021

Evaluation of satellite imagery for monitoring Pacific walruses at a large coastal haulout

Pacific walruses ( Odobenus rosmarus divergens ) are using coastal haulouts in the Chukchi Sea more often and in larger numbers to rest between foraging bouts in late summer and autumn in recent years, because climate warming has reduced availability of sea ice that historically had provided resting platforms near their preferred benthic feeding grounds. With greater numbers of walruses hauling out in large aggregations, new opportunities are presented for monitoring the population. Here we evaluate different types of satellite imagery for detecting and delineating the peripheries of walrus aggregations at a commonly used haulout near Point Lay, Alaska, in 2018–2020. We evaluated optical and radar imagery ranging in pixel resolutions from 40 m to ~1 m: specifically, optical imagery from Landsat, Sentinel-2, Planet Labs, and DigitalGlobe, and synthetic aperture radar (SAR) imagery from Sentinel-1 and TerraSAR-X. Three observers independently examined satellite images to detect walrus aggregations and digitized their peripheries using visual interpretation. We compared interpretations between observers and to high-resolution (~2 cm) ortho-corrected imagery collected by a small unoccupied aerial system (UAS). Roughly two-thirds of the time, clouds precluded clear optical views of the study area from satellite. SAR was unaffected by clouds (and darkness) and provided unambiguous signatures of walrus aggregations at the Point Lay haulout. Among imagery types with 4–10 m resolution, observers unanimously agreed on all detections of walruses, and attained an average 65% overlap (sd 12.0, n 100) in their delineations of aggregation boundaries. For imagery with ~1 m resolution, overlap agreement was higher (mean 85%, sd 3.0, n 11). We found that optical satellite sensors with moderate resolution and high revisitation rates, such as PlanetScope and Sentinel-2, demonstrated robust and repeatable qualities for monitoring walrus haulouts, but temporal gaps between observations due to clouds were common. SAR imagery also demonstrated robust capabilities for monitoring the Point Lay haulout, but more research is needed to evaluate SAR at haulouts with more complex local terrain and beach substrates.

Alaska↗

USGS2022

The applicability of time-integrated unit stream power for estimating bridge pier scour using noncontact methods in a gravel-bed river

In near-field remote sensing, noncontact methods (radars) that measure stage and surface water velocity have the potential to supplement traditional bridge scour monitoring tools because they are safer to access and are less likely to be damaged compared with in-stream sensors. The objective of this study was to evaluate the use of radars for monitoring the hydraulic conditions that contribute to bridge–pier scour in gravel-bed channels. Measurements collected with a radar were also leveraged along with minimal field measurements to evaluate whether time-integrated stream power per unit area (Ω) was correlated with observed scour depth at a scour-critical bridge in Colorado. The results of this study showed that (1) there was close agreement between radar-based and U.S. Geological Survey streamgage-based measurements of stage and discharge, indicating that radars may be viable tools for monitoring flow conditions that lead to bridge pier scour; (2) Ω and pier scour depth were correlated, indicating that radar-derived Ω measurements may be used to estimate scour depth in real time and predict scour depth based on the measured trajectory of Ω. The approach presented in this study is intended to supplement, rather than replace, existing high-fidelity scour monitoring techniques and provide data quickly in information-poor areas.

Colorado↗

USGS2023

Landsat 9 geometric commissioning calibration updates and system performance assessment

Starting with launch of Landsat 7 (L7) on 15 April 1999, the USGS Landsat Image Assessment System (IAS) has been performing calibration and characterization operations for over 20 years on the Landsat spacecrafts and their associated payloads. With the launch of Landsat 9 (L9) on 27 September 2021, that spacecraft and its payloads, the Operational Land Imager-2 (OLI-2) and Thermal Infrared Sensor-2 (TIRS-2), were added to the existing suite of missions supported by the IAS. This paper discusses the geometric characterizations, calibrations, and performance analyses conducted during the commissioning period of the L9 spacecraft and its instruments. During this time frame the following calibration refinements were performed; (1) alignment between the OLI-2 and TIRS-2 instruments and the spacecraft attitude control system, (2) within-instrument band alignment, (3) instrument-to-instrument alignment. These refinements, carried out during commissioning and discussed in this paper, were performed to provide an on-orbit update to the pre-launch calibration parameters that were determined through Ground System Element (GSE) testing and Thermal Vacuum Testing (TVAC) for the two instruments and the L9 spacecraft. The commissioning period calibration update captures the effects of launch shift and zero-G release, and typically represents the largest changes that are made to the on-orbit geometric calibration parameters during the mission. The geometric calibration parameter updates performed during commissioning were done prior to releasing any L9 products to the user community. This commissioning period also represents the time frame during which focus is more strictly placed on the spacecraft and instrument performance, ensuring that system and instrument requirements are met, as contrasted with the post commissioning time frame when a greater focus is placed on the products generated, their behavior and their impact on the user community. Along with the calibration updates discussed in this paper key geometric performance requirements with respect to geodetic accuracy, geometric accuracy, and swath width are presented, demonstrating that the geometric performance of the L9 spacecraft and its’ instruments with respect to these key performance requirements are being met. Within the paper it will be shown that the absolute geodetic accuracy is met for OLI-2 and TIRS-2 with a margin of approximately 79% and 65% respectively while the geometric accuracy is met for OLI-2 and TIRS-2 with a margin of approximately 68% and 43% respectively.

Remote Sensing↗

USGS2024

Identifying conservation introduction sites for endangered birds through the integration of lidar-based habitat suitability models and population viability analyses

Similar to other single-island endemic Hawaiian honeycreepers, the critically endangered ‘ākohekohe ( Palmeria dolei ) is threatened by climate-driven disease spread. To avert the imminent risk of extinction, managers are considering novel measures, including the conservation introduction (CI) of ‘ākohekohe from Maui to higher elevation habitats on the Island of Hawai’i. This study integrated lidar-based habitat suitability models (LHSMs) and population viability analyses (PVAs) to assess five candidate sites currently considered by managers for CI. We first developed an LHSM for the species’ native range on Maui. We then projected habitat suitability across candidate CI sites, using forest structure and topography metrics standardized across sensor types. Given the structural variability observed within the five candidate sites, we identified clusters of contiguous, highly suitable habitat as potential release sites. We then determined how many adult individuals could be supported by each cluster based on adult home range estimates. To determine which clusters could house the minimum number of ‘ākohekohe birds necessary for a stable or increasing future population, we conducted PVAs under multiple scenarios of bird releases. We found that canopy height and relative height 90 had the greatest effects on model performance, possibly reflecting ‘ākohekohe’s preference for taller canopies. We found that a small release of at least nine pairs of equal sex ratios were sufficient for an 80% chance of success and a <1% chance of extirpation in 20 years, resulting in a minimum release area of 4.5 ha in size. We integrated the results of the LHSM and PVA into an interactive web application that allowed managers to consider the caveats and uncertainties associated with both LHSMs and PVAs in their decision-making process. As climate change continues to threaten species worldwide, this research demonstrates the value of lidar remote sensing combined with species-specific models to enable rapid, quantitative assessments that can inform the increasing consideration of time-sensitive conservation introductions.

Hawaii↗

USGS2025

Advancements in satellite observations of inland and coastal waters: Building towards a global validation network

The use of satellite-based remote sensing imagery for water quality monitoring of inland and coastal waters has become widespread over the last few decades, with the expansion of, and investment in, operational Earth-observing missions. Satellite-based sensors are uniquely suited to provide synoptic, system-wide water quality parameter estimates that supplement traditional field-based sampling methods. The remote sensing of water quality parameter estimates is particularly valuable in systems with high temporal and spatial variability, as well as in areas that are difficult to access, or where agencies lack funding for routine monitoring. However, optically complex inland and coastal waters pose additional challenges for developing robust remote sensing retrieval models for optical properties and water quality parameters. One of the biggest challenges is collecting high quality field measurements that are used to calibrate and validate the retrieval algorithms. Here, we present the current status of satellite missions, field methods that include instruments used and commonly measured parameters, and repositories of historical field data that are relevant to inland and coastal water studies. We then present data requirements for model validation and highlight gaps in validation coverage. Finally, we provide suggestions for future field campaigns to improve coordination with remote sensing data collection and to ensure that field data is well suited for use in model or algorithm development.

Remote Sensing↗

USGS2026

Tidal wetland inundated volume estimates using L-band radar imagery and synthetic tide gauging

Tidal inundation dynamics are a principal driver of hydrological and biogeochemical processes in coastal ecosystems, controlling the exchange of carbon, nutrients, and sediments between wetlands and estuaries. In this study, we assessed the utility of L-band radar imagery in deriving tidal wetland inundated volume estimates (pixel-wise water depths), which provide a more robust characterization of wetland–estuary exchange processes than the lateral inundation state estimates. Inundation state products derived using L-band radar were combined with digital elevation models (DEMs) and synthetic tide gauging to estimate the volume of inundation. Synthetic tide gauges, models of water level produced from combined short-term field measurements and long-term monitoring stations were employed to provide calibration and validation for satellite observations for times outside of the water level sensor monitoring period (August–December 2018). Ten synthetic gauges were established across the Charles H. Wheeler Wildlife Management Area (Connecticut, USA) in a regular grid and were used to validate the radar-based inundation state and inundated volume products. To generate volumetric inundation estimates from inundation state products, we employed two bathymetric fill approaches using a DEM to constrain water surface elevations. The first approach assumed a constant water elevation fill for all inundated pixels, while the second introduced a maximum water depth constraint. While both approaches showed strong correlations with synthetic gauges, the depth constraint approach was more accurate, increasing R 2 from 0.87 to 0.98 and lowering RMSE from 0.79 m to 0.02 m. In this study, PALSAR-1/2 served as a proxy for the recently launched NISAR mission. Future research is planned to leverage the improved temporal sampling of the NISAR data record, combined with in-marsh water level observations (May 2025–present) and synthetic gauge estimates to improve wetland–estuary volumetric exchange characterization, which we demonstrate can be accurately estimated when paired with high-quality DEMs.

Connecticut↗

USGS2026

Quantifying Landsat’s contributions to U.S. agricultural and forestry applications

The Landsat program has provided over 54 years of multispectral imagery, contributing vital information for agricultural and forestry scientific research and operational activities. Freely available Landsat data have enabled scientists to analyze land use patterns, assess ecological impacts, and develop strategies for sustainable management. We explored Landsat’s pivotal role through the lens of the United States Group on Earth Observations 2023 Earth Observation Assessment (EOA). The EOA included comprehensive surveys of more than 2000 federally supported Earth observation data products. We subsequently analyzed how Landsat satellite data and derived products support agricultural and forestry-related priorities compared to other Earth observation inputs. We evaluated both direct and indirect applications of the data, identifying key users across federal agencies and assessing how Landsat data contribute to critical products, services, and objectives. The results indicate that Landsat provides key information to support diverse activities across agriculture and forestry sectors, such as enhancing food supply, improving resilience to disaster and disturbance events, maximizing ecosystem productivity and conservation, and supporting regulatory requirements and decision-making. The Landsat OLI and TIRS sensors ranked 4th and 10th, respectively, out of 1171 Earth observation inputs identified in the study, underscoring their value to agriculture and forestry.

Remote Sensing↗

USGS2010

Visible and infrared remote imaging of hazardous waste: A review

One of the critical global environmental problems is human and ecological exposure to hazardous wastes from agricultural, industrial, military and mining activities. These wastes often include heavy metals, hydrocarbons and other organic chemicals. Traditional field and laboratory detection and monitoring of these wastes are generally expensive and time consuming. The synoptic perspective of overhead remote imaging can be very useful for the detection and remediation of hazardous wastes. Aerial photography has a long and effective record in waste site evaluations. Aerial photographic archives allow temporal evaluation and change detection by visual interpretation. Multispectral aircraft and satellite systems have been successfully employed in both spectral and morphological analysis of hazardous wastes on the landscape and emerging hyperspectral sensors have permitted determination of the specific contaminants by processing strategies using the tens or hundreds of acquired wavelengths in the solar reflected and/or thermal infrared parts of the electromagnetic spectrum. This paper reviews the literature of remote sensing and overhead imaging in the context of hazardous waste and discusses future monitoring needs and emerging scientific research areas.

Remote Sensing↗

USGS2011

Oil detection in a coastal marsh with polarimetric Synthetic Aperture Radar (SAR)

The National Aeronautics and Space Administration's airborne Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) was deployed in June 2010 in response to the Deepwater Horizon oil spill in the Gulf of Mexico. UAVSAR is a fully polarimetric L-band Synthetic Aperture Radar (SAR) sensor for obtaining data at high spatial resolutions. Starting a month prior to the UAVSAR collections, visual observations confirmed oil impacts along shorelines within northeastern Barataria Bay waters in eastern coastal Louisiana. UAVSAR data along several flight lines over Barataria Bay were collected on 23 June 2010, including the repeat flight line for which data were collected in June 2009. Our analysis of calibrated single-look complex data for these flight lines shows that structural damage of shoreline marsh accompanied by oil occurrence manifested as anomalous features not evident in pre-spill data. Freeman-Durden (FD) and Cloude-Pottier (CP) decompositions of the polarimetric data and Wishart classifications seeded with the FD and CP classes also highlighted these nearshore features as a change in dominant scattering mechanism. All decompositions and classifications also identify a class of interior marshes that reproduce the spatially extensive changes in backscatter indicated by the pre- and post-spill comparison of multi-polarization radar backscatter data. FD and CP decompositions reveal that those changes indicate a transform of dominant scatter from primarily surface or volumetric to double or even bounce. Given supportive evidence that oil-polluted waters penetrated into the interior marshes, it is reasonable that these backscatter changes correspond with oil exposure; however, multiple factors prevent unambiguous determination of whether UAVSAR detected oil in interior marshes.

Louisiana↗

USGS2013

Estimating riparian and agricultural evapotranspiration by reference crop evapotranspiration and MODIS Enhanced Vegetation Index

Dryland river basins frequently support both irrigated agriculture and riparian vegetation and remote sensing methods are needed to monitor water use by both crops and natural vegetation in irrigation districts. We developed an algorithm for estimating actual evapotranspiration (ET a ) based on the Enhanced Vegetation Index (EVI) from the Moderate Resolution Imaging Spectrometer (MODIS) sensor on the EOS-1 Terra satellite and locally-derived measurements of reference crop ET (ET o ). The algorithm was calibrated with five years of ETa data from three eddy covariance flux towers set in riparian plant associations on the upper San Pedro River, Arizona, supplemented with ETa data for alfalfa and cotton from the literature. The algorithm was based on an equation of the form ET a = ET o [a(1 − e −bEVI ) − c], where the term (1 − e −bEVI ) is derived from the Beer-Lambert Law to express light absorption by a canopy, with EVI replacing leaf area index as an estimate of the density of light-absorbing units. The resulting algorithm capably predicted ET a across riparian plants and crops (r 2 = 0.73). It was then tested against water balance data for five irrigation districts and flux tower data for two riparian zones for which season-long or multi-year ET a data were available. Predictions were within 10% of measured results in each case, with a non-significant (P = 0.89) difference between mean measured and modeled ET a of 5.4% over all validation sites. Validation and calibration data sets were combined to present a final predictive equation for application across crops and riparian plant associations for monitoring individual irrigation districts or for conducting global water use assessments of mixed agricultural and riparian biomes.

Remote Sensing↗

USGS2014

Landsat 8 operational land imager on-orbit geometric calibration and performance

The Landsat 8 spacecraft was launched on 11 February 2013 carrying the Operational Land Imager (OLI) payload for moderate resolution imaging in the visible, near infrared (NIR), and short-wave infrared (SWIR) spectral bands. During the 90-day commissioning period following launch, several on-orbit geometric calibration activities were performed to refine the prelaunch calibration parameters. The results of these calibration activities were subsequently used to measure geometric performance characteristics in order to verify the OLI geometric requirements. Three types of geometric calibrations were performed including: (1) updating the OLI-to-spacecraft alignment knowledge; (2) refining the alignment of the sub-images from the multiple OLI sensor chips; and (3) refining the alignment of the OLI spectral bands. The aspects of geometric performance that were measured and verified included: (1) geolocation accuracy with terrain correction, but without ground control (L1Gt); (2) Level 1 product accuracy with terrain correction and ground control (L1T); (3) band-to-band registration accuracy; and (4) multi-temporal image-to-image registration accuracy. Using the results of the on-orbit calibration update, all aspects of geometric performance were shown to meet or exceed system requirements.

Remote Sensing↗

USGS2014

Prevalence of pure versus mixed snow cover pixels across spatial resolutions in alpine environments: implications for binary and fractional remote sensing approaches

Remote sensing of snow-covered area (SCA) can be binary (indicating the presence/absence of snow cover at each pixel) or fractional (indicating the fraction of each pixel covered by snow). Fractional SCA mapping provides more information than binary SCA, but is more difficult to implement and may not be feasible with all types of remote sensing data. The utility of fractional SCA mapping relative to binary SCA mapping varies with the intended application as well as by spatial resolution, temporal resolution and period of interest, and climate. We quantified the frequency of occurrence of partially snow-covered (mixed) pixels at spatial resolutions between 1 m and 500 m over five dates at two study areas in the western U.S., using 0.5 m binary SCA maps derived from high spatial resolution imagery aggregated to fractional SCA at coarser spatial resolutions. In addition, we used in situ monitoring to estimate the frequency of partially snow-covered conditions for the period September 2013–August 2014 at 10 60-m grid cell footprints at two study areas with continental snow climates. Results from the image analysis indicate that at 40 m, slightly above the nominal spatial resolution of Landsat, mixed pixels accounted for 25%–93% of total pixels, while at 500 m, the nominal spatial resolution of MODIS bands used for snow cover mapping, mixed pixels accounted for 67%–100% of total pixels. Mixed pixels occurred more commonly at the continental snow climate site than at the maritime snow climate site. The in situ data indicate that some snow cover was present between 186 and 303 days, and partial snow cover conditions occurred on 10%–98% of days with snow cover. Four sites remained partially snow-free throughout most of the winter and spring, while six sites were entirely snow covered throughout most or all of the winter and spring. Within 60 m grid cells, the late spring/summer transition from snow-covered to snow-free conditions lasted 17–56 days and averaged 37 days. Our results suggest that mixed snow-covered snow-free pixels are common at the spatial resolutions imaged by both the Landsat and MODIS sensors. This highlights the additional information available from fractional SCA products and suggests fractional SCA can provide a major advantage for hydrological and climatological monitoring and modeling, particularly when accurate representation of the spatial distribution of snow cover is critical.

Remote Sensing↗

USGS2015

The challenges of remote monitoring of wetlands

Wetlands are highly productive and support a wide variety of ecosystem goods and services. Various forms of global change impose compelling needs for timely and reliable information on the status of wetlands worldwide, but several characteristics of wetlands make them challenging to monitor remotely: they lack a single, unifying land-cover feature; they tend to be highly dynamic and their energy signatures are constantly changing; and steep environmental gradients in and around wetlands produce narrow ecotones that often are below the resolving capacity of remote sensors. These challenges and needs set the context for a special issue focused on wetland remote sensing. Contributed papers responded to one of three overarching questions aimed at improving remote, large-area monitoring of wetlands: (1) What approaches and data products are being developed specifically to support regional to global long-term monitoring of wetland landscapes? (2) What are the promising new technologies and sensor/multisensor approaches for more accurate and consistent detection of wetlands? (3) Are there studies that demonstrate how remote long-term monitoring of wetland landscapes can reveal changes that correspond with changes in land cover and land use and/or changes in climate?

Remote Sensing↗