USGS Science⌕ Search

SEARCH · USGS Science

Results for “Northwest Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90Linked to original sources

Eocene age of the Adak ‘Paleozoic (?)’ rocks, Aleutian Islands, Alaska

In 1948, several specimens identified as the plant genus Annularia, a primitive horsetail of Pennsylvanian or Permian age, were found in tuffaceous sandstone exposed near the northern end of Adak Island, Alaska. These beds form the basal part of the Andrew Lake Formation, a newly named sequence of marine sedimentary rocks that is more than 850 m thick, and, in the main, consists of northwest-dipping tuffaceous sandstone, siltstone, shale, and siliceous siltstone and shale interbedded with basaltic flows or penecontemporaneous(?) sills (or both) a few tens of meters thick. This formation rests depositionally(?) on the Finger Bay Volcanics, the massive and intensely altered andesitic and basaltic flows and pyroclastic rocks that form the bulk of Adak Island. Mollusks, foraminifers, sponge spicules, and fish scales and skeletal remains occur in the lower 350 m of the section immediately overlying the basal “Annularia”-bearing beds. Included in this fauna is the pecten Pro-peamussium (cf. P. stanfordensis Arnold), of probable Eocene age; the associated foraminiferal fauna is provincially considered to be of late Eocene (Narizian) age, and the fish scales are similar to those found in the Narizian and Refugian (Eocene and Oligocene) of California. Examination of the matrix surrounding specimens of “Annularia” revealed a substantial dinoflagellate flora—establishing that the “Annularia”- bearing beds are themselves marine units of middle or late Eocene age. The Andrew Lake Formation probably accumulated in a perched basin along the crestal region of an early Tertiary Aleutian ridge. Accordingly, there is no evidence for a Paleozoic Aleutian ridge. There is only scant evidence that the ridge existed in Mesozoic time.

Alaska↗

Timing of the Acadian Orogeny in northern New Hampshire

New U-Pb geochronology constrains the timing of the Acadian orogeny in the Central Maine Terrane of northern New Hampshire. Sixteen fractions of one to six grains each of zircon or monazite have been analyzed from six samples: (1) an early syntectonic diorite that records the onset of the Acadian, (2) a schist, a migmatite, and two granites that together record the peak of the Acadian; and (3) a postkinematic pluton that records the end of the Acadian. Zircon from the syntectonic Wamsutta Diorite gives a 207Pb/206Pb age of circa 408 Ma, the time at which the boundary between the deforming orogenic wedge and the foreland basin was in the vicinity of the Presidential Range. This age agrees well with the Emsian position of the northwest migrating Acadian orogenic front and records the beginning of the Acadian in this part of the Central Maine Terrane. We propose a possible Acadian tectonic model that incorporates the geochronologic, structural, and stratigraphic data. Monazite from the schist, migmatite, Bigelow Lawn Granite, and Slide Peak Granite gives 207Pb/206U ages, suggesting the peak of Acadian metamorphism and intrusion of two-mica granites occurred at circa 402-405 Ma, the main pulse of Acadian orogenesis. Previously reported monazite ages from schists that likely record the peak metamorphism in the Central Maine Terrane of New Hampshire and western Maine range from circa 406-384 Ma, with younger ages in southeastern New Hampshire and progressively older ages to the west, north, and northeast. Acadian orogenesis in the Presidential Range had ended by circa 355 Ma, the 207Pb/235U age of monazite from the Peabody River Granite. From 408 to perhaps at least 394 Ma, Acadian orogenesis in the Presidential Range was typical of the tectonic style, dominated by synkinematic metamorphism, seen in central and southern New Hampshire, Massachusetts, and Connecticut. From no earlier than 394 Ma to as late as 355 Ma, the orogenesis was typical of the style in parts of Maine dominated by postkinematic metamorphism.

Journal of Geology↗

No ring fracture in Mono Basin, California

In Mono Basin, California, USA, a near-circular ring fracture 12 km in diameter was proposed by R.W. Kistler in 1966 to have originated as the protoclastic margin of the Cretaceous Aeolian Buttes pluton, to have been reactivated in the middle Pleistocene, and to have influenced the arcuate trend of the chain of 30 young (62−0.7 ka) rhyolite domes called the Mono Craters. In view of the frequency and recency of explosive eruptions along the Mono chain, and because many geophysicists accepted the ring fracture model, we assembled evidence to test its plausibility. The shear zone interpreted as the margin of the Aeolian Buttes pluton by Kistler is 50−400 m wide but is exposed only along a 7-km-long set of four southwesterly outcrops that subtend only a 70° sector of the proposed ring. The southeast end of the exposed shear zone is largely within the older June Lake pluton, and at its northwest end, the contact of the Aeolian Buttes pluton with a much older one crosses the shear zone obliquely. Conflicting attitudes of shear structures are hard to reconcile with intrusive protoclasis. Also inconsistent with the margin of the ovoid intrusion proposed by Kistler, unsheared salients of the pluton extend ∼1 km north of its postulated circular outline at Williams Butte, where there is no fault or other structure to define the northern half of the hypothetical ring. The shear zone may represent regional Cretaceous transpression rather than the margin of a single intrusion. There is no evidence for the Aeolian Buttes pluton along the aqueduct tunnel beneath the Mono chain, nor is there evidence for a fault that could have influenced its vent pattern. The apparently arcuate chain actually consists of three linear segments that reflect Quaternary tectonic influence and not Cretaceous inheritance. A rhyolitic magma reservoir under the central segment of the Mono chain has erupted many times in the late Holocene and as recently as 700 years ago. The ring fracture idea, however, prompted several geophysical investigations that sought a much broader magma body, but none identified a low-density or low-velocity anomaly beneath the purported 12-km-wide ring, which we conclude does not exist.

California↗

Boulder Creek batholith, Colorado part III: Fingerprinting discordant zircon ages in a complex intrusion

The apparent ages (32 lead/alpha and 6 Pb 206 /U 238 ) of zircon as plotted on an isochron map of the Boulder Creek batholith define the following pattern: (1) very high ages (1600 to 1900 m.y.) within the outermost border zone on the southwest, south, and southeast; (2) transitional high ages (1300 to 1600 m.y.) within an inner border zone on the east and widening to the south and west to include about one-third of the batholith; (3) transitional low ages (1000 to 1300 m.y.) throughout much of the interior of the northern half; and (4) very low ages (1000 m.y. or less) limited to a small area within the northeast corner. The area of minimum age is shown to be part of the reduced-age aureole surrounding the 77 m.y. hornblende granodiorite stock at Jamestown that intrudes the Silver Plume Granite of the Longs Peak-St. Vrain batholith in the region immediately to the north of the minimum-age area of the Boulder Creek batholith. A southeastward elongation of the area of minimum age is attributed to channelway control of the solutions responsible for the recrystallization of the zircon by those northwest-trending breccia reefs that are cut by, or strike toward, the Laramide intrusion. Statistical studies of five zircon separates used for isotopic work showed that the frequency of grains having partial, or complete, rims of colorless zircon on purple to semiopaque zircon cores increased inversely with measured Pb 206 /U 238 age along a smooth curve that, when extrapolated, connected the point representing age of emplacement (0 percent rims) and the point representing the approximate age of re-crystallization (100 percent rims). Consequently, in the Boulder Creek zircon rim frequency gives a useful estimate of the amount of lead lost relative to uranium and thorium from a given sample during its recrystallization. The microstudy indicated: (1) the surface separating core and rim is a major discontinuity; (2) the greater part of the rims appear to be true overgrowths; and (3) the highest frequency of rims is found in the most metamict zircon. However, in any one sample a significant fraction of the most metamict zircon has been sheltered from reaction, presumably by inclusion within relatively impervious minerals, and remains free of rims. These observations coupled with the map evidence of selective channelway control point to warm solutions rather than dry heat as the agent of recrystallization and lead loss.

Colorado↗

Storm-controlled oblique dunes of the Oregon coast

The large (mean height 25 m, spacing 300 m), relatively straight-crested dunes of the central Oregon coast migrate an average of 3.8 m/yr toward an azimuth of 26°. The dunes are transverse to the strong, south-southwesterly winter storm winds that are responsible for their basic form, orientation, and migration. The dry, moderate, north-northwesterly summer winds modify the dune form but not the dune trend. Comparison of the sand transport calculated from wind data and the transport measured from dune migration indicates that the actual transport by the wet southerly winds is only one-third of the amount calculated assuming dry conditions. The resultant (vector-mean) transport rate, as recalculated by comparison of the measured and initially calculated rates, is 34 m 3 /m·yr toward an azimuth of 45°. The dunes are thus oblique by our definition of an oblique dune (angle between dune trend and resultant transport direction between 15° and 75°). The internal structures of the dunes confirm northward migration during wet conditions. Evidence for deposition during wet conditions includes slipface deposits deformed mostly by sliding and various structures formed by the adhesion of sand grains to wet surfaces. Most summer deposits are not preserved, but those on the basal apron (the gentle north slope at the base of the winter slipface) have a high preservation potential. A depositional model based on dune climbing predicts that the preserved record of oblique dunes formed by an obtuse-bimodal wind regime would consist of tabular sets of crossbeds in which the dip angles increase upward from the base of each set.

Oregon↗

Kilometers-scale subsidence of the inner Puerto Rico Trench wall since the Pleistocene

We have observed a thin veneer of Pleistocene-age carbonate rocks on the southern side of Mona Block, a seamount northwest of Puerto Rico, above a water depth of 1800 m. Mona Block is located within the inner wall of the Puerto Rico Trench. A similar veneer of carbonate rocks (corals and pavement) was encountered during a deep submergence vehicle (DSV) Alvin dive in 1976 on the north side of Mona Block at depths of 3650–2900 m. We also observed a remnant Oligocene–Pliocene carbonate platform at a depth of 2080 m on the east side of the block. Restoring the carbonate outcrops to near sea level implies that Mona Block, with a summit currently at 670 m bsl, was an island with an elevation of ≥1000 m until the mid-Pleistocene and has subsided and tilted to the north thereafter. We suggest that the observed subsidence was caused by the foundering or retreating North American slab, which gave rise to the anomalously deep Puerto Rico Trench. Our estimated trench wall subsidence varies nonlinearly from ~800 m in the distal part to ≥3700 m near the trench. Carbonate platform subsidence north of Puerto Rico is older (mid-Pliocene), suggesting that subsidence and, by inference, trench collapse had propagated westward with time. Mona Block is thus a yardstick for studying mantle processes associated with slab retreat and foundering.

Geology↗

Upper-crustal structure beneath the Columbia River Basalt Group, Washington: Gravity interpretation controlled by borehole and seismic studies

A three-dimensional gravity model based on deep-borehole stratigraphy, densities from borehole gravimetry, and crustal structure from deep seismic and electrical surveys puts limits on sub-basalt crustal structure in the northwest quadrant of the Columbia Plateau, Washington. The gravity model indicates that the Miocene Columbia River Basalt Group (CRBG) overlies a broad basin filled with sedimentary rocks that reach thicknesses in excess of 5 km; thickest sub-basalt sedimentary rocks are beneath the late Cenozoic Yakima basin. Analysis of residual gravity shows that the Eocene Chiwaukum graben does not continue beneath the CRBG and that sub-basalt sedimentary rocks are not thrust into the cores of the basalt anticlines in the Yakima fold belt. A gravity high that trends north-south in the center of the CRBG is probably caused by a broad basement ridge marked by thinner sedimentary rocks beneath the Columbia River basalts; the western edge of the north-south basement high is traced at the surface by the Hog Ranch-Naneum Ridge. A major crustal feature, the Olympic- Wallowa lineament, is expressed in the gravity field; the lineament crosses the north-south basement high but does not offset it, suggesting that any strike- slip motion on the lineament preceded development of the north-south basement high. An alternative interpretation of the north-south gravity high, based on a previous seismic study, relates it to a high-density structure in the crystalline basement, perhaps associated with a failed continental rift.

Idaho, Oregon, Washington↗

Subsurface geology and oil and gas resources of Osage County, Oklahoma. Part 8, Parts of township 20 north, ranges 9 and 10 east, and township 21 north, ranges 8 and 9 east and all of township 21 north, range 10 east

The area whose subsurface geology and oil and gas resources are described in this report lies along the southern border of Osage County, Okla., and includes parts of T. 20 N., Rs. 9 and 10 E., and of T. 21 N., Rs. 8 and 9 E., and all of T. 21 N., R. 10 E. The towns of Osage and Prue are within the area; Cleveland, which is a mile south of the Arkansas River, is not far beyond its southwestern limit; and Tulsa is 10 miles east of its southeast corner. The production of oil and gas from the many fields in the five townships began as early as 1905, and drilling has continued up to the present. Oil or gas is produced from 13 zones at depths ranging from 250 to 2,600 feet. Of these zones, one is in the Ordovician system, one is at the contact of the Mississippian and the Pennsylvanian series, and all others are in the Pennsylvanian series. The five townships lie within a region that contains many oil and gas fields in the Bartlesville sand; the Red Fork sand is oil-bearing in a narrow belt in T. 21 N., R. 8 E.; and oil and gas are produced in small areas from the Taneha, Skinner, Squirrel, Cleveland, Jones, and Layton sands, the Mussehem and Peoples sand zone, the Okesa, Torpedo, and Clem Creek sand zone, and the Big lime and Peru sand zone. The rocks dip westward across the five townships at an average rate of about 38 feet to the mile as measured on the top of the Oswego lime. This regional dip is interrupted, however, by many anticlines, domes, synclines, and structural basins. The subsurface crests of most of the domes and anticlines are not directly under the crests as determined on the exposed rocks, and the dips of the deeper rocks are steeper and the structural closures greater in the buried rocks than in the exposed rocks. The exposed rocks are cut by several faults that trend northwest, but the data are insufficient to determine whether the deeply buried rocks, also, are displaced along the faults. This investigation has shown that there are a few localities not yet completely tested in this part of Osage County that may produce oil and gas and that a few producing oil fields have areas within or adjacent to them that have not been thoroughly prospected. It is pointed out that yields of oil and gas from limy reservoir rocks may be increased by acid treatment and that additional oil may be produced from some of the reservoir sands by repressuring them with gas or flooding them with water.

Oklahoma↗

Changes between early development (1930–60) and recent (2005–15) groundwater-level altitudes and dissolved-solids and nitrate concentrations In and near Gaines, Terry, and Yoakum Counties, Texas

Llano Estacado Underground Water Conservation District, Sandy Land Underground Water Conservation District, and South Plains Underground Water Conservation District manage groundwater resources in a part of west Texas near the Texas-New Mexico State line. Declining groundwater levels have raised concerns about the amount of available groundwater in the study area and the potential for water-quality changes resulting from dewatering and increased vertical groundwater movement between adjacent water-bearing units. In 2014, the U.S. Geological Survey, in cooperation with Llano Estacado Underground Water Conservation District, Sandy Land Underground Water District, and South Plains Underground Water Conservation District, began a multiphase project to develop a regional conceptual model of the hydrogeologic framework and geochemistry of the Ogallala, Edwards-Trinity, and Dockum aquifers. The Ogallala aquifer is the shallowest aquifer in the study area and is the primary source of water for agriculture and municipal supply in the area. This report describes the results of the first phase of the study, during which groundwater-level-altitude and selected water-quality data from wells in and near Gaines, Terry, and Yoakum Counties were compiled and evaluated for the Ogallala, Edwards-Trinity, and Dockum aquifers. Readily available digital groundwater data for the study area (geologic, well-construction, groundwater-level-altitude, and selected water-quality data) were compiled to assess temporal and spatial changes in groundwater resources from early development (1930–60) to recent (2005–15) periods. Pertinent data were compiled from available sources for the study area and for a 5-mile buffer area around the study area to prevent gridding errors near the boundary. Geologic and well-construction data were used to determine or verify the aquifer in which each well was completed. Depending on the available data, the aquifer assignment (aquifer in which a given well was completed) was determined on the basis of the following criteria, in order of priority: (1) the screened or open interval(s) of the well, (2) the total depth of the well, or (3) the completed aquifer reported for a given well by the data source. Potentiometric-surface maps were created to depict changes in groundwater-level altitudes for the Ogallala and Edwards-Trinity aquifers. In addition to comparing groundwater-level altitudes and water quality from the early development and recent periods, hydrographs of groundwater-level altitudes were created, and changes in water quality for various periods between 1930 and 2015 were evaluated. Variance maps for each groundwater-level-altitude grid were used to evaluate the spatial data coverage and to identify areas with higher uncertainty because of spatially limited data availability for some of the aquifers. For this report, existing dissolved-solids and nitrate concentration data were compiled and assessed for evidence of spatial patterns and changes over time. These data were compiled for samples collected from wells completed in the Ogallala, Edwards-Trinity, or Dockum aquifer during the early development period (1930–60) or the recent period (2005–15); temporal and spatial variations were assessed from depictions of the measured concentration values. Dissolved-solids and nitrate concentrations measured in samples from three wells completed in the Ogallala aquifer (well identifiers 11524, 11824, and 11825) for which long-term monitoring was done for various periods between 1950 and 2015 were also compiled and analyzed. Groundwater-level altitudes of the Ogallala aquifer are generally higher in the northwestern part of the study area and lower in the southeastern part of the study area, varying by as much as 800 feet. Groundwater flow paths for the early development period generally trend from northwest to southeast across the study area. Compared to those for the early development period, local features in the potentiometric surface for the recent period are more pronounced, likely as a result of additional data coverage, increased groundwater withdrawals, and local flow paths that are more variable. For the Edwards-Trinity aquifer potentiometric-surface map of the recent period, a general northwest to southeast flow gradient was also evident, with some subtle differences compared to the early development period. The Edwards-Trinity aquifer water-level-altitude change map between the early development and recent periods indicated similar spatial trends as in the Ogallala aquifer and indicated that groundwater-level altitudes declined over a large amount of the area for which sufficient data were available for reliably mapping changes. During the recent period, median dissolved-solids concentrations of less than 1,000 milligrams per liter (mg/L) were predominantly measured in the western part of the study area, and median concentrations of more than 1,000 mg/L were predominantly measured in the eastern part of the study area. A general pattern of increasing nitrate concentrations from west to the northeast was evident in the study area. Nitrate concentrations measured in samples collected from 16 wells completed in the Ogallala aquifer for the recent period were equal to or greater than 10 mg/L, the primary drinking water standard for finished drinking water.

Texas↗

Geohydrology and conceptual model of a ground-water-flow system near a Superfund site in Cheshire, Connecticut

Degradation of ground-water quality has been identified in an area of the north-central part of the town of Cheshire, Connecticut. An investigation by the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, was done during 1994-95 to characterize the unconsolidated glacial deposits and the sedimentary bedrock, integrate the local geohydrologic conditions with the regional geohydrologic system, and develop a conceptual understanding of ground-water flow in the study area. A regional ground-water-flow model developed for the region near the study area indicates that perennial streams, including Judd Brook and the Tenmile River, form hydrologic divides that separate the larger region into hydraulically independent flow systems. In the local study area, synoptic water-level measurements made in June 1995 indicate that ground water near the water table flows west and southwestward from the low hill on the eastern side of the area toward the pond and wetlands along Judd Brook. Water-level data indicate that there is good hydraulic connection between the unconsolidated materials and underlying fractured bedrock. Unconsolidated materials in the study area consist principally of glacial stratified deposits that are fine sand, silt, and clay of glaci- olacustrine origin; locally these overlie thin glacial till. The glacial sediments range in thickness from a few feet to about 25 ft in the eastern part of the study area and are as much as 100 ft thick in the western and southern part of the study area beneath the Judd Brook and Tenmile River valleys. Fluvial redbeds of the New Haven Arkose underlie the glacial deposits in the region; in the study area, the redbeds consist of (1) channel sandstone units, which are coarse sandstone to fine conglomerate, generally in 6- to 15-ft- thick sequences; and (2) overbank mudstone units, which are siltstone and silty sandstone with some fine sandstone, generally in 6- to 50-ft-thick sequences. Thin-bedded zones of siltstone that are particularly fissile are present locally within the mudstone units. Rock units strike northward and dip eastward at about 20. The eastward-dipping strata are cut by a consistent set of west to west-northwest dipping, high-angle fractures. These fractures are oriented perpendicular to bedding and are present mostly in the channel sandstone units, but locally extend into the mudstone units as well. Borehole-geophysical logging indicates that ground water flows along bedding planes in fissile zones and between fissile zones in high-angle fractures, which are perpendicular to bedding. The combined fracture types form an aquifer system in which ground water follows a stair-step flowpath, flowing horizontally through fissile zones and vertically through high-angle fractures. Heat-pulse flow meter measurements and borehole fluid-conductivity and temperature logs indicate that only a small subset of the fissile zones and some high-angle fractures are hydraulically significant. A generalized local-scale ground-water flow model based on a nonspecific, but realistic, rock and fracture geometry was developed for the study area. Simulations show that under nonpumping conditions at a hypothetical well located in the middle of the model, ground-water flow was separated into upper and lower zones in which flow paths differed but were generally from northeast to southwest. Several short-duration aquifer tests conducted in the study area indicate that there is good hydraulic connection in the fractures between the pumping well (CS-221) and two bedrock wells located approximately 100 ft to the north and south along bedding strike. During the short duration of the aquifer tests, there was no hydraulic connection in bedrock wells located to the east, perpendicular to the strike. A range of transmissivity of 27 to 46 ft2/d was calculated from the aquifer-test data for the fractured-bedrock aquifer at CS-221 and TH-2. Individual fracture zones identified by bo

Open-File Report↗

Demonstration-site development and phytoremediation processes associated with trichloroethene (TCE) in ground water, Naval Air Station-Joint Reserve Base Carswell Field, Fort Worth, Texas

A field-scale phytoremediation demonstration study was initiated in 1996 by the U.S. Geological Survey (USGS), in cooperation with the U.S. Air Force, at a site on Naval Air StationJoint Reserve Base Carswell Field (NAS–JRB) adjacent to Air Force Plant 4 (AFP4) in Fort Worth, Tex. (fig. 1). Trichloroethene (TCE) has been used at AFP4 in aircraft manufacturing processes for decades; spills and leaks from tanks in the manufacturing building have resulted in shallow ground-water contamination on-site and downgradient from the facility (Eberts and others, 2003). The objective of the study was to determine the effectiveness of eastern cottonwoods ( Populus deltoides ) in decreasing the mass of dissolved TCE in ground water through phytoremediation. Phytoremediation is a process by which plants decrease the mass of a contaminant through a variety of chemical, physical, and biological means. Before development of the phytoremediation demonstration site, natural attenuation of TCE at the site occurred by sorption, dispersion, dilution, and possibly volatilization (Eberts and others, 2003). Long-term, field-scale monitoring and evaluation of this site contribute to the understanding of the processes associated with phytoremediation and provide practical information about field-scale applications of the method. This fact sheet briefly summarizes the development of the phytoremediation demonstration site at NAS–JRB and describes some of the physical and chemical processes associated with phytoremediation. The phytoremediation demonstration site is on the southern edge of the central lobe of a TCE plume in the surficial (alluvial) aquifer. The plume originates at AFP4 about 0.9 mile upgradient from the site (fig. 1). The 9.5-acre site is in the northwestern corner of the golf course on NAS–JRB. The saturated thickness of the alluvial aquifer, which is composed of clay, silt, sand, and gravel, ranges from about 1.5 to 5 feet at the site. The total thickness of the alluvial aquifer ranges from about 6 to 15 feet. The Goodland-Walnut confining unit, composed of massively bedded shaley limestone, underlies the alluvial aquifer. The general direction of ground-water flow in the study area (fig. 2) is from northwest to southeast, approximately perpendicular to the long sides of the cottonwood plantations. Ground water flows toward Farmers Branch Creek in the area southwest of the golf cart path. At the time of site characterization in August 1996, depth to water ranged from 8 to 13 feet below land surface.

Texas↗

Devonian brachiopods of southwesternmost laurentia: Biogeographic affinities and tectonic significance

Three brachiopod faunas discussed herein record different depositional and tectonic settings along the southwestern margin of Laurentia (North America) during Devonian time. Depositional settings include inner continental shelf (Cerros de Los Murcielagos), medial continental shelf (Rancho Placeritos), and offshelf continental rise (Rancho Los Chinos). Ages of Devonian brachiopod faunas include middle Early (Pragian) at Rancho Placeritos in west-central Sonora, late Middle (Givetian) at Cerros de Los Murcielagos in northwestern Sonora, and late Late (Famennian) at Rancho Los Chinos in central Sonora. The brachiopods of these three faunas, as well as the gastropod Orecopia, are easily recognized in outcrop and thus are useful for local and regional correlations. Pragian brachiopods dominated by Acrospirifer and Meristella in the "San Miguel Formation" at Rancho Placeritos represent the widespread Appohimchi Subprovince of eastern and southern Laurentia. Conodonts of the early to middle Pragian sulcatus to kindlei Zones associated with the brachiopods confirm the ages indicated by the brachiopod fauna and provide additional information on the depositional setting of the Devonian strata. Biostratigraphic distribution of the Appohimchi brachiopod fauna indicates continuous Early Devonian shelf deposition along the entire southern margin of Laurentia. The largely emergent southwest-trending Transcontinental arch apparently formed a barrier preventing migration and mixing of many genera and species of brachiopods from the southern shelf of Laurentia in northern Mexico to the western shelf (Cordilleran mio-geocline) in the western United States. Middle Devonian Stringocephalus brachiopods and Late Devonian Orecopia gastropods in the "Los Murcielagos Formation" in northwest Sonora represent the southwest-ernmost occurrence of these genera in North America and date the host rocks as Givetian and Frasnian, respectively. Rhynchonelloid brachiopods (Dzieduszyckia sonora) and associated worm tubes in the Los Pozos Formation of the Sonora allochthon in central Sonora are also found in strati-form-barite facies in the upper Upper Devonian (Famennian) part of the Slaven Chert in the Roberts Mountains allochthon (upper plate) of central and western Nevada. Although these brachiopods and worm tubes occur in similar depositional settings along the margin of Laurentia in Mexico, they occur in allochthons that exhibit different tectonic styles and times of emplacement. Thus, the allochthons containing the brachiopods and worm tubes in Sonora and Nevada are parts of separate orogenic belts and have different geographic settings and tectonic histories. Devonian facies belts and faunas in northern Mexico indicate a continuous continental shelf along the entire southern margin of Laurentia. These data, in addition to the continuity of the late Paleozoic Ouachita-Marathon-Sonora orogen across northern Mexico, contradict the early Late Jurassic Mojave-Sonora megashear as a viable hypothesis for large-magnitude offset (600-1100 km) of Proterozoic through Middle Jurassic rocks from California to Sonora.

Special Paper of the Geological Society of America↗

High-resolution aeromagnetic mapping of volcanic terrain, Yellowstone National Park

High-resolution aeromagnetic data acquired over Yellowstone National Park (YNP) show contrasting patterns reflecting differences in rock composition, types and degree of alteration, and crustal structures that mirror the variable geology of the Yellowstone Plateau. The older, Eocene, Absaroka Volcanic Supergroup, a series of mostly altered, andesitic volcanic and volcaniclastic rocks partially exposed in mountains on the eastern margin of YNP, produces high-amplitude, positive magnetic anomalies, strongly contrasting with the less magnetic, younger, latest Cenozoic, Yellowstone Plateau Group, primarily a series of fresh and variably altered rhyolitic rocks covering most of YNP. The Yellowstone caldera is the centerpiece of the Yellowstone Plateau; part of its boundary can be identified on the aeromagnetic map as a series of discontinuous, negative magnetic anomalies that reflect faults or zones along which extensive hydrothermal alteration is localized. The large-volume rhyolitic ignimbrite deposits of the 0.63-Ma Lava Creek Tuff and the 2.1-Ma Huckleberry Ridge Tuff, which are prominent lithologies peripheral to the Yellowstone caldera, produce insignificant magnetic signatures. A zone of moderate amplitude positive anomalies coincides with the mapped extent of several post-caldera rhyolitic lavas. Linear magnetic anomalies reflect the rectilinear fault systems characteristic of resurgent domes in the center of the caldera. Peripheral to the caldera, the high-resolution aeromagnetic map clearly delineates flow unit boundaries of pre- and post-caldera basalt flows, which occur stratigraphically below the post-caldera rhyolitic lavas and are not exposed extensively at the surface. All of the hot spring and geyser basins, such as Norris, Upper and Lower Geyser Basins, West Thumb, and Gibbon, are associated with negative magnetic anomalies, reflecting hydrothermal alteration that has destroyed the magnetic susceptibility of minerals in the volcanic rocks. Within Yellowstone Lake, which is mostly within the Yellowstone caldera, aeromagnetic lows also are associated with known hydrothermal activity in the lake. Many of the magnetic lows extend beyond the areas of alteration and hot springs, suggesting a more extensive currently active or fossil hydrothermal system than is currently mapped. Steep magnetic gradients, suggesting faults or fractures, bound the magnetic lows. This implies that fractures localize the hot springs. Magnetic gradient trends reflect the mapped Basin and Range structural trends of north and northwest, as well as northeasterly trends that parallel the regional trend of the Snake River Plain and the track of the Yellowstone hot spot which follow the Precambrian structural grain. These trends are found both at small scales such as in hydrothermal basins and at more regional fault scales, which suggests that the regional stress field and reactivated older structures may exert some control on localization of hydrothermal activity. ?? 2002 Elsevier Science B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗

U-Pb geochronology and geochemistry of the McCoy Mountains Formation, southeastern California: A Cretaceous retroarc foreland basin

The timing of deposition of fluvial sediments now forming the >7-km-thick McCoy Mountains Formation is one of the key uncertainties in reconstructing the Mesozoic poleogeography of southern California and western Arizona. Ion-microprobe U-Pb geochronologic data for individual zircons from nine sandstones from the McCoy Mountains type section and six associated igneous rocks provide significant new constraints on the tectonic setting and the timing of deposition within the northwest-trending McCoy basin. U-Pb zircon data from a metavolcanic rock of the underlying Dome Rock sequence in the Palen Mountains confirm that the McCoy Mountains Formation was deposited after regional Middle to Late Jurassic arc magmatism. U-Ph zircon data from a Late Cretaceous granodiorite intruding the formation in the Coxcomb Mountains confirm that the formation was deformed and metamorphosed prior to 73.5 ?? 1.3 Ma. Populations of detrital zircons vary systematically with both rock type and stratigraphic height; lithic arkoses predominantly derived from the west have consistently more abundant younger zircons than do litharenite sandstones predominantly derived from the north, and the youngest zircons yield maximum depositional ages that decrease from 116 Ma near the base to 84 Ma near the top of the section. The detrital-zircon data permit a Late Jurassic age for the basal, comparatively quartz-rich sandstone. However, the data further suggest that >90% of the formation was deposited between middle Early and middle Late Cretaceous time. These results are consistent with the hypothesis that most of the McCoy Mountains Formation represents a retroarc foreland basin, deposited behind the active, evolving Cretaceous Cordilleran continental-margin magmatic arc that lay to the west and in the foreland of the actively deforming Cretaceous Maria fold-and-thrust belt.

Geological Society of America Bulletin↗

Reconnaissance geologic map of the Dixonville 7.5' quadrangle, Oregon

The Dixonville 7.5 minute quadrangle is situated near the edge of two major geologic and tectonic provinces the northernmost Klamath Mountains and the southeastern part of the Oregon Coast Ranges (Figure 1). Rocks of the Klamath Mountains province that lie within the study area include ultramafic, mafic, intermediate and siliceous igneous types (Diller, 1898, Ramp, 1972, Ryberg, 1984). Similar rock associations that lie to the southwest yield Late Jurassic and earliest Cretaceous radiometric ages (Dott, 1965, Saleeby, et al., 1982, Hotz, 1971, Harper and Wright, 1984). These rocks, which are part of the Western Klamath terrane (Western Jurassic belt of (Irwin, 1964), are considered to have formed within an extensive volcanic arc and rifted arc complex (Harper and Wright, 1984) that lay along western North America during the Late Jurassic (Garcia, 1979, Garcia, 1982, Saleeby, et al., 1982, Ryberg, 1984). Imbricate thrust faulting and collapse of the arc during the Nevadan orogeny, which ranged in age between about 150 to 145 Ma in the Klamath region (Coleman, 1972, Saleeby, et al., 1982, Harper and Wright, 1984) was syntectonic with, or closely followed by deposition of the volcano-lithic clastic rocks of the Myrtle Group. The Myrtle Group consists of Upper Jurassic and Lower to middle Cretaceous turbidity and mass flow deposits considered to be either arc basin and/or post-orogenic flysh basins that were syntectonic with the waning phases of arc collapse (Imlay et al., 1959, Ryberg, 1984, Garcia, 1982, Roure.and Blanchet, 1983). The intermediate and mafic igneous rocks of the Rogue arc and the pre-Nevadan sedimentary cover (the Galice Formation, (Garcia, 1979) are intruded by siliceous and intermediate plutonic rocks principally of quartz diorite and granodiorite composition (Dott, 1965, Saleeby, et al., 1982, Garcia, 1982, Harper and Wright, 1984). The plutonic rocks are locally tectonized into amphibolite, gneiss, banded gneiss and augen gneiss. Similar metamorphic rocks have yielded metamorphic ages of 165 to 150 Ma (Coleman, 1972, Hotz, 1971, Saleeby, et al., 1982, Coleman and Lanphere, 1991). The Jurassic arc rocks and sedimentary cover occur as a tectonic outlier in this region (Figure 2) as they are bound to the northwest and southeast by melange, broken formation and semi-schists of the Dothan Formation and Dothan Formation(?) that are considered part of a late Mesozoic accretion complex (Ramp, 1972, Blake, et al., 1985). The plutonism that accompanied arc formation and tectonic collapse of the arc does not intrude the structurally underlying Dothan Formation, indicating major fault displacements since the Early Cretaceous. Semischistose and schistose rocks of the accretion complex have yielded metamorphic ages of around 125-140 Ma where they have been studied to the southwest (Coleman and Lanphere, 1971, Dott, 1965, Coleman, 1972). These rocks were unroofed and unconformably overlain by marine deposits by late early Eocene time (Baldwin, 1974). The early Tertiary history of this region is controversial. The most recent interpretation is that during the Paleocene and early Eocene the convergent margin was undergoing transtension or forearc extension as suggested by the voluminous extrusion of pillow basalt and related dike complexes (Wells, et al., 1984, Snavely, 1987). This episode was followed shortly by thrust and strike-slip faulting in the late early Eocene (Ryberg, 1984). During the Eocene, the Mesozoic convergent margin association of arc, clastic basin, and accretion complex was partly unroofed and faulted against early Cenozoic rocks of the Oregon Coast Ranges (Ramp, 1972, Baldwin, 1974, Champ, 1969, Ryberg, 1984). Faults that are typical of this period of deformation include high-angle reverse faults with a very strong component of strike-slip displacement characterized by a low-angle rake of striae. Thrust and oblique-slip faults are ubiquitous in early Tertiary rocks to the northwest (Ryberg, 1984, Niem and Niem, 1990). The late Mesozoic and early Cenozoic arc and forearc rocks are unconformably overlain to the east by the late Eocene and younger, mainly continental fluvial deposits and pyroclastic flows of the Cascade arc (Peck, et al., 1964, Baldwin, 1974, Walker and MacLeod, 1991). Minor fossiliferous shallow marine sandstone is locally present. The volcanic sequence consists of a homoclinal section of about 1 to 2 kilometers of andesitic to rhyolitic flows and ash flow tuff. The section is gently east-tilted and is slightly disrupted by NE trending faults with apparent normal separation.

Oregon↗

Pennsylvanian to Jurassic eolian transportation systems in the western United States

The direction of sediment transport in eolian sandstones of Pennsylvanian to Jurassic age was interpreted from crossbedding resultants (vector means) obtained from studies of eolian rocks in the western U.S., supplemented by data from the few eolian units of eastern North America. These were compiled from the published or unpublished (theses) literature, from unpublished field data contributed by colleagues, or from measurements made for this study. In addition, new paleogeographic maps were compiled to evaluate the influence of geographic features on the atmospheric circulation patterns that are inferred from the crossbedding studies. Regionally, the crossbedding indicates northeasterly, northerly, or northwesterly winds (present coordinates) from Pennsylvanian through most of Middle Jurassic time. A rather abrupt change in wind directions occurred in late Middle Jurassic time (late part of the Callovian Age) when westerly wind patterns developed. By the Late Jurassic the winds shifted to southwesterly. Calculations of the consistency factor (vector mean strength) made from region-wide analyses of the resultants indicate fairly unidirectional winds from the Pennsylvanian through the Early Jurassic. Middle Jurassic circulation was more varied, judging from crossbedding studies in the lower part of the Entrada Sandstone. Crossbedding in Upper Jurassic eolian rocks of Wyoming and South Dakota yielded a random pattern but Upper Jurassic rocks farther south on the Colorado Plateau and adjoining areas show a return to a fairly unidirectional pattern. Comparing the resultants with their reconstructed paleogeographic setting shows surprisingly little influence of major geographic features on overall circulation patterns. However, the greatest amount of local variation occurred at or near highly indented shorelines where the temperature contrast between land and water produces local wind currents that may vary appreciably from regional circulation patterns. Although they do not cause noticeable horizontal deflections in wind patterns, small and low topographic highs appear to be able to promote the development of a dune field if a source of sand is available and if streams do not enter the growing dune field.

western United States↗

Jurassic normal and strike-slip faults at Crater Island, northwestern Utah

At Crater Island, northern Silver Island Mountains, northwestern Utah, an unbroken Tertiary fault block within the Basin and Range province exhibits Jurassic or older structures that are virtually unmodified by subsequent tectonism, providing an opportunity to examine the tectonics of the Jurassic back arc of the Cordillera. Widespread high-angle faults, mainly striking north and northeast, offset the moderately west-dipping strata down to the west, thereby extending the strata parallel to bedding by 10% to 20%. These faults apparently belong to a single kinematic event of west-northwest oriented extension subparallel to bedding. The normal faults merge with a north-northwest dextral strike-slip fault system. The two fault systems are kinematically compatible, suggesting that they may have been contemporaneous. A low-angle (thrust?) fault nearly parallel to bedding within Ordovician strata is cut by the high-angle faults. Intrusive relations with about 160 Ma granitoid rocks show that all of these faults are Late Jurassic or older, with a reasonable lower age limit of Early Jurassic established on the basis of paleogeographic reconstructions using sedimentary deposits in the region. Jurassic dikes indicate a minimum horizontal compression direction that is parallel to the extension direction indicated by the normal faults, thus supporting the inference that normal and strike-slip faulting took place during the late Middle or early Late Jurassic. We interpret these data to indicate that minor thrusting, probably during the Jurassic, was followed by extensional faulting within a strike-slip fault system, probably close in time to intrusion. These relations are similar to those reported previously in the nearby Newfoundland Mountains. Other mountains of northern Utah and adjacent Nevada also have examples of Jurassic normal faults that contrast with the more generally observed thrust faults and tectonite fabrics. These data point to a possible regional extensional tectonic event affecting the crust far inland of the Jurassic magmatic arc, an event probably associated with back-arc magmatism.

Utah↗

Stratigraphy and depositional environment of nonmarine facies of Frontier Formation, Eastern Pioneer Mountains, southwestern Montana

The Upper Cretaceous Frontier Formation in the eastern Pioneer Mountains of southwestern Montana was deposited in nonmarine environments west of the Western Interior Seaway within the Cordilleran foreland basin. These rocks have been assigned to the Frontier because they contain lithologies typical of the Frontier in the region even though they are entirely nonmarine and are thicker than the correlative marine Frontier to the east. The Frontier in the eastern Pioneer Mountains is underlain by the Vaughn Member of the Blackleaf Formation, but the upper part of the Frontier has been eroded and locally is overlain by rocks of Tertiary age. Geologic mapping was conducted and four sections were measured and described to determine facies, thickness variations, and depositional environments. In the eastern Pioneer Mountains study area, the Frontier ranges in thickness from about 1200 ft (366 m) in the south to more than 3400 ft (1036 m) in the north\. Frontier strata in the study area cannot be readily subdivided into mappable units, but two broadly-defined informal lithic units are described. The lower unit contains yellow-brown weathering siltstone, mudstone, and fine-grained quartz-rich sandstone, and is about 250 ft (76 m) thick. The upper unit is composed of yellow-brown to dark-gray siltstone and mudstone, quartz- and chert-rich sandstone, conglomeratic sandstone, and limestone, and is more than 2100 ft (640 m) thick in one measured section. The lower contact of the Frontier is placed at the top of a porcellanite bed that is associated with maroon mudstone and siltstone, limestone, and calcareous dark-gray shale in the underlying Vaughn Member of the Blackleaf Formation. The porcellanite bed directly overlies the highest maroon mudstone-siltstone bed of the upper Vaughn. The Frontier Formation in the eastern Pioneer Mountains was deposited on a broad delta plain dominated by fine-grained sediments. Sandstones exhibit characteristics of anastomosing fluvial channels, average 5% to 10% of the entire formation, and have width to depth ratios of less than 30. The Frontier in the eastern Pioneer Mountains is lithostratigraphically equivalent to the Frontier to the east in the Gravelly, Greenhorn, and Madison Ranges, but may include strata that are younger in age. Frontier strata to the south at Lima Peaks are the thickest in the region (up to 7000 ft; 2100 m) and include facies that are time-equivalent to the marine Frontier, the overlying Cody Shales, and the Telegraph Creek Formation of the Madison Range to the east. The Frontier in the eastern Pioneer Mountains is in part lithostratigraphically equivalent to the Coberly Formation in the Drummond, Montana area (50 mi [80 km] northwest of Butte, Montana) and the Marias River Shales near Great Falls (150 mi [240 km] northeast of Butte) in west-central Montana.

Mountain Geologist↗