USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research Earth Surface”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 163 records · Page 9Linked to original sources
USGS1997

A test of the double-shearing model of flow for granular materials

The double-shearing model of flow attributes plastic deformation in granular materials to cooperative slip on conjugate Coulomb shears (surfaces upon which the Coulomb yield condition is satisfied). The strict formulation of the double-shearing model then requires that the slip lines in the material coincide with the Coulomb shears. Three different experiments that approximate simple shear deformation in granular media appear to be inconsistent with this strict formulation. For example, the orientation of the principal stress axes in a layer of sand driven in steady, simple shear was measured subject to the assumption that the Coulomb failure criterion was satisfied on some surfaces (orientation unspecified) within the sand layer. The orientation of the inferred principal compressive axis was then compared with the orientations predicted by the double-shearing model. The strict formulation of the model [ Spencer , 1982] predicts that the principal stress axes should rotate in a sense opposite to that inferred from the experiments. A less restrictive formulation of the double-shearing model by de Josselin de Jong [1971] does not completely specify the solution but does prescribe limits on the possible orientations of the principal stress axes. The orientations of the principal compression axis inferred from the experiments are probably within those limits. An elastoplastic formulation of the double-shearing model [ de Josselin de Jong , 1988] is reasonably consistent with the experiments, although quantitative agreement was not attained. Thus we conclude that the double-shearing model may be a viable law to describe deformation of granular materials, but the macroscopic slip surfaces will not in general coincide with the Coulomb shears.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

The Galapagos Spreading Centre at 86° W: A detailed geothermal field study

We report here measurements of the heat flow field of the Galapagos Spreading Center on crust of age less than 1.0 m.y. The 443 measurements in an area of about 570 km 2 reveal the general planform of the geothermal flux and permit the first truly areal estimate of the near-axis conductive heat flux. The intrusion process and associated hydrothermal circulation dominate the surface heat flow pattern, with circulation apparently continuing beyond the limits of our survey. The areal average of the conductive heat flux is 7.1 ± 0.8 HFU (295 ± 33 mW/m 2 ), about one-third the heat flux predicted by plate models. The remaining heat is apparently removed by venting of hydrothermal waters at the spreading axis and through basalt outcrops and hydrothermal mounds off axis. The pattern of surface heat flux is lineated parallel to the axis and the strongly lineated topography. Sharp lateral gradients in the heat flow, greater than 10 HFU/km near escarpments and commonly expressed as high heat flow at the tops of the scarps and lower heat flow in the valleys, may indicate a local concentration of the circulation by surface fault systems and/or variable sediment thickness.

Journal of Geophysical Research Solid Earth↗
USGS2014

Time-averaged discharge rate of subaerial lava at Kīlauea Volcano, Hawai‘i, measured from TanDEM-X interferometry: Implications for magma supply and storage during 2011-2013

Differencing digital elevation models (DEMs) derived from TerraSAR add-on for Digital Elevation Measurements (TanDEM-X) synthetic aperture radar imagery provides a measurement of elevation change over time. On the East Rift Zone (EZR) of Kīlauea Volcano, Hawai‘i, the effusion of lava causes changes in topography. When these elevation changes are summed over the area of an active lava flow, it is possible to quantify the volume of lava emplaced at the surface during the time spanned by the TanDEM-X data—a parameter that can be difficult to measure across the entirety of an ~100 km 2 lava flow field using ground-based techniques or optical remote sensing data. Based on the differences between multiple TanDEM-X-derived DEMs collected days to weeks apart, the mean dense-rock equivalent time-averaged discharge rate of lava at Kīlauea between mid-2011 and mid-2013 was approximately 2 m 3 /s, which is about half the long-term average rate over the course of Kīlauea's 1983–present ERZ eruption. This result implies that there was an increase in the proportion of lava stored versus erupted, a decrease in the rate of magma supply to the volcano, or some combination of both during this time period. In addition to constraining the time-averaged discharge rate of lava and the rates of magma supply and storage, topographic change maps derived from space-based TanDEM-X data provide insights into the four-dimensional evolution of Kīlauea's ERZ lava flow field. TanDEM-X data are a valuable complement to other space-, air-, and ground-based observations of eruptive activity at Kīlauea and offer great promise at locations around the world for aiding with monitoring not just volcanic eruptions but any hazardous activity that results in surface change, including landslides, floods, earthquakes, and other natural and anthropogenic processes.

Hawai'i↗
USGS2009

Premonitory acoustic emissions and stick-slip in natural and smooth-faulted Westerly granite

A stick-slip event was induced in a cylindrical sample of Westerly granite containing a preexisting natural fault by loading at constant confining pressure of 150 MPa. Continuously recorded acoustic emission (AE) data and computer tomography (CT)-generated images of the fault plane were combined to provide a detailed examination of microscale processes operating on the fault. The dynamic stick-slip event, considered to be a laboratory analog of an earthquake, generated an ultrasonic signal that was recorded as a large-amplitude AE event. First arrivals of this event were inverted to determine the nucleation site of slip, which is associated with a geometric asperity on the fault surface. CT images and AE locations suggest that a variety of asperities existed in the sample because of the intersection of branch or splay faults with the main fault. This experiment is compared with a stick-slip experiment on a sample prepared with a smooth, artificial saw-cut fault surface. Nearly a thousand times more AE were observed for the natural fault, which has a higher friction coefficient (0.78 compared to 0.53) and larger shear stress drop (140 compared to 68 MPa). However at the measured resolution, the ultrasonic signal emitted during slip initiation does not vary significantly between the two experiments, suggesting a similar dynamic rupture process. We propose that the natural faulted sample under triaxial compression provides a good laboratory analogue for a field-scale fault system in terms of the presence of asperities, fault surface heterogeneity, and interaction of branching faults. ?? 2009.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Geyser periodicity and the response of geysers to deformation

Numerical simulations of multiphase fluid and heat transport through a porous medium define combinations of rock properties and boundary conditions which lead to geyser‐like periodic discharge. Within the rather narrow range of conditions that allow geyser‐like behavior, eruption frequency and discharge are highly sensitive to the intrinsic permeabilities of the geyser conduit and the surrounding rock matrix, to the relative permeability functions assumed, and to pressure gradients in the matrix. In theory, heat pipes (concomitant upward flow of steam and downward flow of liquid) can exist under similar conditions, but our simulations suggest that the periodic solution is more stable. Simulated time series of geyser discharge are chaotic, but integrated quantities such as eruption frequency and mass discharge per eruption are free of chaos. These results may explain the observed sensitivity of natural geysers to small strains such as those caused by remote earthquakes, if ground motion is sufficient to induce permeability changes. Changes in geyser behavior caused by minor preseismic deformation, periodic surface loading, and Earth tides are more difficult to explain in the context of our current model.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

A migratory mantle plume on Venus: Implications for Earth?

A spatially fixed or at least internally rigid hotspot reference frame has been assumed for determining relative plate motions on Earth. Recent 1:5,000,000 scale mapping of Venus, a planet without terrestrial-style plate tectonics and ocean cover, reveals a systematic age and dimensional progression of corona-like arachnoids occurring in an uncinate chain. The nonrandom associations between arachnoids indicate they likely formed from a deep-seated mantle plume in a manner similar to terrestrial hotspot features. However, absence of expected convergent "plate" margin deformation suggests that the arachnoids are the surface expression of a migratory mantle plume beneath a stationary surface. If mantle plumes are not stationary on Venus, what if any are the implications for Earth?

Journal of Geophysical Research B: Solid Earth↗
USGS2022

Off-fault deformation in regions of complex fault geometries: the 2013, Mw7.7, Baluchistan rupture (Pakistan)

Observations of recent earthquake surface ruptures show that ground deformations include a localized component occurring on faults, and an off-fault component affecting the surrounding medium. This second component is also referred to as off-fault deformation (OFD). The localized component generally occurs on complex networks of faults that connect at depth onto a unique fault plane, whereas OFD consists of distributed fracturing and diffuse deformation of the bulk volume, and occurs over scales of hundreds of meters to kilometers around the faults. High-resolution optical image correlation presents a unique potential to characterize the complexity of the surface displacements, including on-fault displacements and OFDs. In this study, we used sub-pixel correlation of 0.5-m resolution optical images to measure the surface displacement field with a <20 cm accuracy for a 30-km long section of the 2013 M w 7.7 Baluchistan, Pakistan, rupture. Our results document significant variability in the fault displacements, associated with large proportions of OFD in regions of fault geometrical complexity. Conversely, in regions where the fault geometry is simple, surface deformation is entirely accommodated by the primary faults with 0% OFD. When combining the localized deformation on faults with the OFD, we show that the total surface displacement budget is constant along the strike of the rupture, despite strong variations observed in the rupture geometry. Based on this analysis, we propose an idealized scenario of earthquake surface deformation as a function of the rupture geometrical variations.

Journal of Geophysical Research, Solid Earth↗
USGS2012

Seismic evidence for active magmatic underplating beneath the Basin and Range Province, western United States

Near-vertical and wide-angle seismic reflection data provide evidence for the presence of a magma body at the base of the crust beneath Buena Vista Valley in northwestern Nevada. The seismic response of this hypothesized magma body is characterized by high-amplitude, near-vertical P wave reflections and a comparably strong P -to- S converted phase. The magma body, referred to here as the Buena Vista Magma Body, is probably a single sill with thickness no greater than 200 m and length no greater than 1.8 km. The melt fraction in the sill is undoubtedly greater than 20–30%, and probably exceeds 50%. Melt composition is unconstrained. Although the age of the Buena Vista Magma Body is difficult to determine precisely, it is probably no older than 500,000 years. This suggests that magmatism in the Basin and Range Province is an ongoing process, despite the relative paucity of volcanic rocks erupted at the surface during the last 6 m.y.

Nevada, Idaho↗
USGS2012

Stress measurements at depth in the vicinity of the San Andreas fault. Implications for the magnitude of shear stress at depth

Using the hydraulic fracturing technique, we have made a systematic series of in situ stress measurements in wells drilled near the San Andreas fault. In an attempt to provide constraints for the magnitude of shear stress on the San Andreas fault at depth we have measured both the variation of stress with distance from the fault in relatively shallow (∼230 m) wells and the variation of stress with depth in a ∼1-km-deep well located 4 km from the fault. The shallow wells are located along profiles roughly perpendicular to the fault in the western Mojave desert near Palmdale and in central California where the fault is creeping. In both areas the direction of maximum compression was found to be approximately 45° from the local trend of the San Andreas. The two stress profiles show very similar results: (1) shear stress (on planes parallel to the San Andreas) increases with distance from the fault, more markedly in the western Mojave, (2) the far-field shear stress at ∼200 m depth is ∼50 bars, and (3) the horizontal principal stresses as well as shear stress increase with depth more rapidly in the wells farthest from the fault. The ∼1-km-deep well, also located in the western Mojave desert, shows increases of both horizontal principal stresses and shear stress with depth. Shear stress increases from about 25 bars at 150–300 m to about 80 bars at 750–850 m. Although this rapid increase of shear stress with depth suggests that the mean shear stress on the fault at seismogenic depths exceeds several hundred bars, the principal stresses increase with depth in a steplike manner. As this may be a near-surface effect, extrapolation of the measurements to much greater depths may not be warranted.

Journal of Geophysical Research Solid Earth↗
USGS2012

Earthquake swarm in Long Valley caldera, California, January 1983: Evidence for dike inflation

The 1982–1983 deformation observed by trilateration and leveling surveys across the Long Valley caldera is apparently related to the 8.5‐km‐long by 8‐km‐deep vertical rupture surface defined by the January 1983 earthquake swarm that occurred in the south moat of the caldera. The observed deformation can be explained as follows. In late 1982, 0.03 km 3 of magma was injected into a dike that dips 30° northward from the bottom of the rupture surface. The downdip dimension of this dike is 8 km. The dike inflation accounts for the uplift observed across the caldera as well as some of the horizontal deformation. Inflation of the dike generated a tension of about 3 bars across the vertical plane that was to become the rupture surface of the January swarm. This reduced the frictional stress on the rupture plane and perhaps triggered the slip that caused the January swarm. Right‐lateral slip (0.22 m) on the uppermost 2 km of the rupture plane during and after the January swarm accounts for the additional horizontal deformation observed. The model can be improved marginally if strike slip is admitted over the entire rupture surface and 0.006 km 3 of magma is injected along that surface in the depth interval 3–8 km. The improvement in the model fit, however, is not sufficient to require shallow injection of magma. Thus we conclude that inflation of a dike at depth (8–12 km) dipping northward beneath the resurgent dome plus shallow right‐lateral slip on the rupture surface is a simple, but not unique, explanation of the observed deformation and seismicity.

California↗
USGS2017

Rock friction under variable normal stress

This study is to determine the detailed response of shear strength and other fault properties to changes in normal stress at room temperature using dry initially bare rock surfaces of granite at normal stresses between 5 and 7 MPa. Rapid normal stress changes result in gradual, approximately exponential changes in shear resistance with fault slip. The characteristic length of the exponential change is similar for both increases and decreases in normal stress. In contrast, changes in fault normal displacement and the amplitude of small high-frequency elastic waves transmitted across the surface follow a two stage response consisting of a large immediate and a smaller gradual response with slip. The characteristic slip distance of the small gradual response is significantly smaller than that of shear resistance. The stability of sliding in response to large step decreases in normal stress is well predicted using the shear resistance slip length observed in step increases. Analysis of the shear resistance and slip-time histories suggest nearly immediate changes in strength occur in response to rapid changes in normal stress; these are manifested as an immediate change in slip speed. These changes in slip speed can be qualitatively accounted for using a rate-independent strength model. Collectively, the observations and model show that acceleration or deceleration in response to normal stress change depends on the size of the change, the frictional characteristics of the fault surface, and the elastic properties of the loading system.

Journal of Geophysical Research B: Solid Earth↗
USGS2004

Crystallographic controls on the frictional behavior of dry and water-saturated sheet structure minerals

We compare the frictional strengths of 17 sheet structure mineral powders, measured under dry and water-saturated conditions, to identify the factors that cause many of them to be relatively weak. The dry coefficient of friction μ ranges upward from 0.2 for graphite, leveling off at 0.8 for margarite, clintonite, gibbsite, kaolinite, and lizardite. The values of μ (dry) correlate directly with calculated (001) interlayer bond strengths of the minerals. This correlation occurs because shear becomes localized along boundary and Riedel shears and the platy minerals in them rotate into alignment with the shear planes. For those gouges with μ (dry) < 0.8, shear occurs by breaking the interlayer bonds to form new cleavage surfaces. Where μ (dry) = 0.8, consistent with Byerlee's law, the interlayer bonds are sufficiently strong that other frictional processes dominate. The transition in dry friction mechanisms corresponds to calculated surface energies of 2–3 J/m 2 . Adding water causes μ to decrease for every mineral tested except graphite. If the minerals are separated into groups with similar crystal structures, μ (wet) increases with increasing interlayer bond strength within each group. This relationship also holds for the swelling clay montmorillonite, whose water-saturated strength is consistent with the strengths of nonswelling clays of similar crystal structure. Water in the saturated gouges forms thin, structured films between the plate surfaces. The polar water molecules are bonded to the plate surfaces in proportion to the mineral's surface energy, and μ (wet) reflects the stresses required to shear through the water films.

Journal of Geophysical Research B: Solid Earth↗
USGS2003

The strength and rheology of methane clathrate hydrate

Methane clathrate hydrate (structure I) is found to be very strong, based on laboratory triaxial deformation experiments we have carried out on samples of synthetic, high-purity, polycrystalline material. Samples were deformed in compressional creep tests (i.e., constant applied stress, ??), at conditions of confining pressure P = 50 and 100 MPa, strain rate 4.5 ?? 10-8 ??? ?? ??? 4.3 ?? 10-4 s-1, temperature 260 ??? T ??? 287 K, and internal methane pressure 10 ??? PCH4 ??? 15 MPa. At steady state, typically reached in a few percent strain, methane hydrate exhibited strength that was far higher than expected on the basis of published work. In terms of the standard high-temperature creep law, ?? = A??ne-(E*+PV*)/RT the rheology is described by the constants A = 108.55 MPa-n s-1, n = 2.2, E* = 90,000 J mol-1, and V* = 19 cm3 mol-1. For comparison at temperatures just below the ice point, methane hydrate at a given strain rate is over 20 times stronger than ice, and the contrast increases at lower temperatures. The possible occurrence of syntectonic dissociation of methane hydrate to methane plus free water in these experiments suggests that the high strength measured here may be only a lower bound. On Earth, high strength in hydrate-bearing formations implies higher energy release upon decomposition and subsequent failure. In the outer solar system, if Titan has a 100-km-thick near-surface layer of high-strength, low-thermal conductivity methane hydrate as has been suggested, its interior is likely to be considerably warmer than previously expected.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Usefulness of weak bands in midinfrared remote sensing of particulate planetary surfaces

Midinfrared (2.5–25 μm) reflectance spectra of minerals are often used to predict emittance qualitatively. These spectra display weak overtone and combination tone bands, which may be as diagnostic of composition as the strong fundamental molecular vibration bands usually considered for remote sensing applications, but which have been widely ignored. However, unlike the strong bands, the contrast of weak bands relative to the continuum in the midinfrared usually does not decrease with decreasing particle size, but typically increases. To illustrate this behavior, transmittance and reflectance spectra of calcite and quartz are presented for the wavelength range from 4000 to 400 cm −1 (2.5–25 μm). It is the purpose of this paper to point out that these weak bands are potentially useful for compositional remote sensing of particulate planetary surfaces; this will require completion of supporting laboratory studies to document the occurrence of weak bands.

Journal of Geophysical Research Solid Earth↗
USGS2012

On the state of lithospheric stress in the absence of applied tectonic forces

Numerous published analyses of the nontectonic state of stress are based on Hooke's law and the boundary condition of zero horizontal deformation. This approach has been used to determine the gravitational stress state as well as the effects of processes such as erosion and temperature changes on the state of lithospheric stress. The major disadvantage of these analyses involves the assumption of lateral constraint which seems unrealistic in view of the observational fact that the crust can deform horizontally in response to applied loads. If the same problems are addressed by assuming that the remote stress state is constant, instead of the condition of zero horizontal deformation, then the resulting stress states are entirely different and in good accord with observations. In the absence of applied tectonic forces the only likely gravitational stress states are those for which all three principal stresses are nearly equal. To the contrary, the gravitational stress states developed on the basis of the lateral constraint assumption can be ruled out. The processes of erosion and sedimentation have slight tendencies to increase and decrease, respectively, the state of deviatoric stress. In particular, for initial stress states in the range of slightly extensional to compressional, erosion has the effect of enhancing the ratio of average horizontal to vertical stress, which may explain, at least in part, the common observation of high near-surface horizontal stresses. Temperature changes have only minor effects on the stress state, as averaged over the thickness of the lithosphere.

Journal of Geophysical Research Solid Earth↗
USGS2012

Historic surface slip along the San Andreas Fault near Parkfield, California

The Parkfield Earthquake Prediction Experiment is focusing close attention on the 44-km-long section of the San Andreas fault that last ruptured seismically in 1966 ( M s 6.0). The 20-km-long central segment of the 1966 Parkfield rupture, extending from the mainshock epicenter at Middle Mountain southeastward to Gold Hill, forms a 1- to 2-km salient northeastward away from the dominant N40°W strike. Following the 1966 earthquake afterslip, aseismic slip has been nearly constant. Moderate Parkfield earthquakes have recurred on average every 21 years since 1857, when a great earthquake ( M ≈8) ruptured at least as far north as the southern Parkfield segment. Many measurements of slip have been made near Parkfield since 1966. Nevertheless, much of the history of surface slip remained uncertain, especially the total amount associated with the 1966 event. In 1985 we measured accumulated slip on the four oldest cultural features offset by the fault along the 1966 Parkfield rupture segment. We interpret net slip on each feature as a sum of event slip (sum of coseismic and rapid preseismic and postseismic slip) from Parkfield earthquakes and steady interseismic slip as measured over the last 20 years on nearby alinement arrays, creep meters, and trilateration lines. We assumed for each site that event slip was identical for the 1922, 1934, and 1966 Parkfield events and that long-term average rate of interseismic slip was constant between all events. Two fences on the southern segment, southeast of Gold Hill, indicate event slip of 13 and 15 cm and interseismic slip rate of 0.36 and 0.30 cm/yr since 1959 and 1908, respectively. At these sites, redundant independent data support our assumption that both event and interseismic slip occur uniformly. On the central segment, near Parkfield, both the 1934 and the 1966 ruptures offset a bridge built in 1932. Interseismic slip rate near the bridge has been about 1.1 cm/yr since 1966; thus we deduce an average event slip of 31 cm for the 1934 and 1966 earthquakes. On a parallel fault trace, 1 km to the southwest, slip was about 8 cm in 1966; thus total event slip summed across the entire fault zone near Parkfield was nearly 40 cm. On Middle Mountain, 4 km north of the 1966 mainshock epicenter, an offset fence indicates 17 cm of slip in 1966 and a 2.26-cm/yr interseismic slip rate since circa 1946. Thus the central segment of the 1966 rupture is characterized by much larger event slip (∼40 cm) than both distal segments (∼15 cm). This amount of surface slip per event is about twice what had been previously assumed. Larger 1966 surface slip in the central part of the rupture is geodetically compatible with a coseismic slip of 65±10 cm slip on a narrow, buried asperity between Middle Mountain and Gold Hill that has been inferred from the depth distribution of early aftershocks. Assuming our characteristic surface slip model, one can further deduce a deficit in slip since the great 1857 earthquake. Taking the long-term slip rate as 3.3 cm/yr, the surface slip deficit is 3±0.2 m south of Gold Hill but only 0.3±0.3 m northward from Parkfield.

Journal of Geophysical Research Solid Earth↗
USGS2003

New insights into Kilauea's volcano dynamics brought by large-scale relative relocation of microearthquakes

We investigated the microseismicity recorded in an active volcano to infer information concerning the volcano structure and long-term dynamics, by using relative relocations and focal mechanisms of microearthquakes. There were 32,000 earthquakes of the Mauna Loa and Kilauea volcanoes recorded by more than eight stations of the Hawaiian Volcano Observatory seismic network between 1988 and 1999. We studied 17,000 of these events and relocated more than 70%, with an accuracy ranging from 10 to 500 m. About 75% of these relocated events are located in the vicinity of subhorizontal decollement planes, at a depth of 8-11 km. However, the striking features revealed by these relocation results are steep southeast dipping fault planes working as reverse faults, clearly located below the decollement plane and which intersect it. If this decollement plane coincides with the pre-Mauna Loa seafloor, as hypothesized by numerous authors, such reverse faults rupture the pre-Mauna Loa oceanic crust. The weight of the volcano and pressure in the magma storage system are possible causes of these ruptures, fully compatible with the local stress tensor computed by Gillard et al. [1996]. Reverse faults are suspected of producing scarps revealed by kilometer-long horizontal slip-perpendicular lineations along the decollement surface and therefore large-scale roughness, asperities, and normal stress variations. These are capable of generating stick-slip, large-magnitude earthquakes, the spatial microseismic pattern observed in the south flank of Kilauea volcano, and Hilina-type instabilities. Rupture intersecting the decollement surface, causing its large-scale roughness, may be an important parameter controlling the growth of Hawaiian volcanoes.

Journal of Geophysical Research B: Solid Earth↗
USGS1997

Coseismic deformation of the Wrights tunnel during the 1906 San Francisco earthquake: A key to understanding 1906 fault slip and 1989 surface ruptures in the southern Santa Cruz Mountains, California

The Wrights tunnel is an abandoned railroad tunnel that crosses the San Andreas fault in the southern Santa Cruz Mountains in the vicinity of the 1989 Loma Prieta earthquake. The tunnel was damaged and deformed during the 1906 San Francisco earthquake and a plot showing postearthquake measurements made in the tunnel is given by Lawson [1908]. The amount of offset shown on this plot (1.5 m) has been used in several studies as being representative of the amount of fault offset along this segment of the San Andreas fault in 1906. Our historical research shows that different observers reported different amounts of fault offset in the tunnel and that the 1.5 m given on the plot is not a surveyed measurement. In addition, the plot of the tunnel has been interpreted in several previous studies as evidence of a broad (1.5 km) zone of faulting beneath Summit Ridge. Our analysis shows that this plot need not indicate a broad zone of deformation. Our historical research and modeling of the tunnel measurements indicate that faulting was confined to a zone less than 400 m wide and that 60–85% of the coseismic slip occurred across a single fault plane. There is no evidence for offset across a second shear zone beneath Summit Ridge in 1906. This implies that surface fractures reported on Summit Ridge in 1906 were not associated with significant deformation of the tunnel, implying that they were shallow, surficial features. By analogy, the very similar fractures that occurred on Summit Ridge in 1989 were also probably the result of shallow gravitational, rather than deep-seated tectonic, processes. Our modeling also indicates that total coseismic, near-surface slip across the San Andreas fault zone in the Wrights tunnel in 1906 was at least 1.7–1.8 m.

Journal of Geophysical Research B: Solid Earth↗