USGS Science⌕ Search

SEARCH · USGS Science

Results for “River Research and Applications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 89Linked to original sources
USGS2025

Assessing legacy nitrogen in groundwater using numerical models of the Long Island aquifer system, New York

Nitrogen transported along groundwater flow paths in coastal aquifers can contribute substantially to nitrogen loading into surface water receptors, particularly in hydrologic systems dominated by groundwater discharge. Nitrogen entrained in the aquifer is a function of land use and associated nitrogen sources at the time of groundwater recharge, which may differ considerably from present-day sources. Legacy nitrogen can result in substantial discrepancies between observed present-day nitrogen loading to surface water receptors and loading estimated from present-day sources. Additionally, legacy nitrogen can continue to discharge into surface waters after nitrogen mitigation actions have been undertaken. Here, we use a numerical modeling framework to compare three methods of estimating time-varying historical nitrogen loads to four water bodies (receptors) on eastern Long Island, New York. The methods span a range of data requirements and process complexity, from instantaneous receptor loads calculated from steady-state groundwater contributing areas, to transient loads estimated by explicitly simulating legacy groundwater nitrogen transport over a century with large changes in nitrogen sources and hydrologic conditions. The effects of legacy nitrogen on estimated receptor loads varied temporally and spatially within the study area. Depending on antecedent nitrogen inputs and hydrologic conditions, historical annual nitrogen loads estimated from transient simulations accounting for legacy nitrogen can be quite similar (<10% difference) or substantially different (±100%) from those estimated from simpler instantaneous methods. Continued input of present-day nitrogen sources using methods that account for legacy nitrogen results in asymptotic increases in receptor nitrogen loads over time, indicating that simulated present-day receptor nitrogen loads are not in equilibrium with present-day inputs. For these receptors in disequilibrium, models simulating transient groundwater nitrogen transport could be used to account for legacy nitrogen lag times to help resource managers evaluate the potential effectiveness of proposed nitrogen mitigation actions.

EarthArXiv↗
USGS2025

Overview of The SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest earthquake sequence

We present initial findings from the ongoing Community Stress Drop Validation Study to compare spectral stress‐drop estimates for earthquakes in the 2019 Ridgecrest, California, sequence. This study uses a unified dataset to independently estimate earthquake source parameters through various methods. Stress drop, which denotes the change in average shear stress along a fault during earthquake rupture, is a critical parameter in earthquake science, impacting ground motion, rupture simulation, and source physics. Spectral stress drop is commonly derived by fitting the amplitude‐spectrum shape, but estimates can vary substantially across studies for individual earthquakes. Sponsored jointly by the U.S. Geological Survey and the Statewide (previously, Southern) California Earthquake Center our community study aims to elucidate sources of variability and uncertainty in earthquake spectral stress‐drop estimates through quantitative comparison of submitted results from independent analyses. The dataset includes nearly 13,000 earthquakes ranging from M 1 to 7 during a two‐week period of the 2019 Ridgecrest sequence, recorded within a 1° radius. In this article, we report on 56 unique submissions received from 20 different groups, detailing spectral corner frequencies (or source durations), moment magnitudes, and estimated spectral stress drops. Methods employed encompass spectral ratio analysis, spectral decomposition and inversion, finite‐fault modeling, ground‐motion‐based approaches, and combined methods. Initial analysis reveals significant scatter across submitted spectral stress drops spanning over six orders of magnitude. However, we can identify between‐method trends and offsets within the data to mitigate this variability. Averaging submissions for a prioritized subset of 56 events shows reduced variability of spectral stress drop, indicating overall consistency in recovered spectral stress‐drop values.

California↗
USGS2026

Remote compositional analyses of space-weathered lunar maria

Visible-to-shortwave infrared (VSWIR) reflectance spectroscopy has revolutionized our understanding of planetary surface compositions. However, space-weathering processes on airless bodies complicate quantitative compositional analyses. Here, we present a framework to isolate the signatures of space weathering in VSWIR spectra of lunar maria by leveraging radiative transfer modeling under the assumptions that (i) a space-weathered target can be expressed as a mixture of fresh and fully space-weathered components and (ii) remaining signatures can be modeled by including agglutinates as an end-member component. We first validate this approach against laboratory spectra of space-weathered Apollo mare soils of known mineral compositions using a probabilistic Markov Chain Monte Carlo implementation of the Hapke radiative transfer model. Second, we illustrate how this approach can be applied to orbital Moon Mineralogy Mapper data. The proposed space-weathering correction workflow for lunar maria could be expanded to other lunar lithologies and applied to existing and future data sets.

Planetary Science Journal↗
USGS2025

Simulating human behavior under earthquake early warning

Earthquakes are a rapid-onset hazard where advance planning and learning plays a key role in mitigating injuries and death to individuals. Recent advances in earthquake detection have resulted in the development of earthquake early warning (EEW) systems. These systems can provide advance warning to predetermined geographic regions that an earthquake is in progress, which may result in individuals receiving warning seconds before significant shaking is felt at their location. This additional time could allow individuals to take more effective protective actions during the immediate disaster. To demonstrate this, we created an agent-based simulation of a basic apartment that allowed us to randomly and repeatedly simulate an individual receiving and responding to an EEW message. The results of our preliminary simulation show that, in our study environment, earthquake early warning alerts have the potential to allow for sufficient time for individuals to take protective actions.

Washington↗
USGS2024

Chloride concentrations in groundwater from the western part of the Southern Hills regional aquifer system, Louisiana, 2021–22

Groundwater is heavily used for public supply and industrial uses in the Baton Rouge, Louisiana, area. Lowered water levels resulting from groundwater withdrawals have induced the movement of saltwater towards wells in East Baton Rouge and West Baton Rouge Parishes. Saltwater intrusion has the potential to affect water supply infrastructure, reduce water availability for some uses, and increase treatment costs. To document current conditions, samples were collected from 161 wells screened in 10 aquifers of the Southern Hills regional aquifer system during November 2021 through February 2022. The results were compared with historical data to identify where chloride concentrations are increasing, which could indicate that saltwater intrusion is occurring. Saltwater intrusion, to varying degrees and areal extents, was observed in most of the 10 aquifers. The limited availability of monitoring wells near or within some of the known saltwater plume areas restricts tracking of the movement or delineation of the plumes’ current extents.

Louisiana↗
USGS2026

Multi-objective optimization of a hydro-economic model in an over-allocated agricultural basin

Groundwater depletion for agricultural irrigation poses significant environmental and economic challenges. This study introduces a proof-of-concept that combines hydro-economic modeling, scenario-based modeling, and multi-objective optimization to manage pumping curtailment in an over-allocated basin in the western United States. Three optimization scenarios were evaluated, each offering different degrees of management flexibility. Results reveal that scenarios with finer spatial resolution achieved greater environmental benefits per unit profit loss. Additionally, strategies allowing fractional reductions in curtailed wells–rather than complete shutdowns based on water rights seniority–substantially improved efficiency, highlighting the value of increased decision-making flexibility. Although scenario testing can aid stakeholder engagement and strategy exploration, multi-objective optimization provides a systematic framework to quantify tradeoffs between competing objectives. This combined approach demonstrates promise for building consensus and supporting the design of sustainable water management strategies that balance agricultural livelihoods with ecosystem preservation.

Oregon↗
USGS2024

Characterizing directivity in small (M 2.4-5) aftershocks of the Ridgecrest sequence

Directivity, or the focusing of energy along the direction of an earthquake rupture, is a common property of earthquakes of all sizes and can cause increased hazard due to azimuthally dependent ground‐motion amplification. For small earthquakes, the effects of directivity are generally less pronounced due to reduced rupture size, yet the directivity in small events can bias source property estimates and provide important insights into general regional faulting patterns. However, due to observational limitations, directivity is usually only measured and modeled for large events. As such, many studies of small earthquakes either ignore directivity altogether or assume a constant rupture direction for all events in a cluster. In our study, we apply a refined directivity fitting method constrained with two separate methods of source deconvolution to the dataset of aftershocks of the 2019 Ridgecrest earthquakes, which contain a large number of well‐recorded small‐to‐mid sized earthquakes occurring in close proximity to each other. The revealed directivity of 100+ small (M 2.4–5) earthquakes is highly heterogeneous and primarily oblique to and away from the main fault strike, suggesting a complex postseismic stress redistribution. In addition, the energy focusing effect of directivity appears to bias the selection of high‐quality data from stations in the direction of rupture, leading to average stress‐drop increases of 50% if directivity is not accounted for.

California↗
USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2025

Long-term dynamics of earthquake swarms in the Yellowstone caldera

The factors controlling the spatial distribution and temporal evolution of earthquake swarms in volcanic systems remain unclear. We leverage leading-edge deep learning algorithms and a detailed three-dimensional velocity model to construct a 15-year high-resolution earthquake catalog of the Yellowstone caldera region. More than half of the region’s earthquakes are clustered into swarm-like families characterized by episodes of hypocenter expansion and migration. Adjacent earthquake swarms, separated by long quiescent periods, are found to be a dominant feature. We suggest that these swarms are controlled by the interplay between slowly diffusing aqueous fluids and rapid episodic fluid injections, which may result from the breaking of permeability seals. Our analyses also indicate that clustered seismicity beneath the caldera occurs on relatively immature, rougher fault structures, compared to more planar faults outside. Our results provide additional context for understanding seismicity in hydrothermal systems, highlighting the key role played by long-term fluid diffusion processes in driving the occurrence of earthquake swarms.

Idaho, Montana, Wyoming↗
USGS2024

Preliminary observations of the April 5th, 2024, Mw4.8 New Jersey earthquake

On 5 April 2024, 10:23 a.m. local time, a moment magnitude 4.8 earthquake struck Tewksbury Township, New Jersey, about 65 km west of New York City. Millions of people from Virginia to Maine and beyond felt the ground shaking, resulting in the largest number (>180,000) of U.S. Geological Survey (USGS) “Did You Feel It?” reports of any earthquake. A team deployed by the Geotechnical Extreme Events Reconnaissance Association and the National Institute of Standards and Technology documented structural and nonstructural damage, including substantial damage to a historic masonry building in Lebanon, New Jersey. The USGS National Earthquake Information Center reported a focal depth of about 5 km, consistent with a lack of signal in Interferometric Synthetic Aperture Radar data. The focal mechanism solution is strike slip with a substantial thrust component. Neither mechanism’s nodal plane is parallel to the primary northeast trend of geologic discontinuities and mapped faults in the region, including the Ramapo fault. However, many of the relocated aftershocks, for which locations were augmented by temporary seismic deployments, form a cluster that parallels the general northeast trend of the faults. The aftershocks lie near the Tewksbury fault, north of the Ramapo fault.

New Jersey↗
USGS2024

The advantages of electric-grade heat storage in long closed-loop wells

Though long (e.g., tens of kilometers) closed-loop geothermal wells are under consideration for the extraction of subsurface heat, these wells might also serve as an efficient energy storage mechanism for electricity generation. Using a semi-analytic model solution, the potential for electric-grade heat storage as a function of ambient temperature (e.g., corresponds to depth of loop), well length, well diameter, and flow rate is evaluated. The following simplified cases for comparison of standard closed loop operation with energy storage operation were considered: [1] constant flow rate and constant temperature (90 °C) injection to represent the standard closed-loop base-case; and [2] constant flow rate and annual cycle sinusoidal temperature (90-150 °C) to represent seasonal (summer) charging while solar resources are peak. Initial temperatures for all scenarios considered herein are a uniform 175 °C. Electric-grade heat is assumed to be delivered whenever temperatures at the extraction point exceed 90 °C. For calculation purposes only, if temperature falls below 100 °C, it is assumed that heat delivered is sub-economic, so no electricity would be produced. For all scenarios, temperatures at the extraction well asymptotically approach the flow-weighted average injection temperature, but energy storage scenarios exhibited a damped time-varying signal that diminishes in magnitude with length of the loop. The asymptotic approach depends on initial temperatures in the rock and the heat extraction rate (a function of well diameter and flowrate). This analysis demonstrates that shorter closed loops can produce more electricity over time than longer closed-loops previously proposed for electricity production over typical engineering design lifetimes (e.g., 30 years). Although only a high-temperature scenario is considered herein, rock that is initially below boiling temperature would not host a standard closed-loop resource, but injection of hot water seasonally would asymptotically heat this low-temperature system to temperatures capable of electricity production. In other words, regardless of initial temperatures, closed loops could be used to store electricity with no critical minerals in the geothermal battery.

Conference Paper↗
USGS2026

Controls on natural hydrogen generation during serpentinization of mantle rocks

Mantle rocks undergoing serpentinization can generate significant amounts of natural hydrogen, yet the rates and controlling processes remain poorly understood. Here, we constrain the possible hydrogen generation rates in two distinct mantle rock types, the fertile lherzolites of the Western Pyrenees and the depleted harzburgites of Northern California, to relatively low rates of ~0.1 to ~0.5 tonnes H₂ yr⁻¹ km⁻³ of reactive rock. When integrated over the full reactive volumes, this corresponds to total production rates of ~300 to ~600 tonnes H₂ yr⁻¹. By combining three-dimensional geophysical inversion with numerical modelling of fluid-rock processes, we show that hydrogen generation rates are mainly limited by H₂ saturation in the fluid and reaction kinetics. Under these constraints, hydrogen generation in mantle-derived serpentinization systems proceeds slowly, making rapid large-scale replenishment unlikely and suggesting that large, economically relevant accumulations, would require timescales of thousands to tens of thousands of years to develop.

northern California, western Pyrenees↗
USGS2025

False positives in the identification of dynamic earthquake triggering

Dynamic earthquake triggering is commonly identified through the temporal correlation between increased seismicity rates and global earthquakes that are possible triggering events. However, correlation does not imply causation. False positives may occur when unrelated seismicity rate changes coincidently occur at around the time of candidate triggers. We investigate the expected false positive rate in Southern California with global M ≥ 6 earthquakes as candidate triggers. We compute the false positive rate by applying the statistical tests used by DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 to synthetic earthquake catalogs with no real dynamic triggering. We find a false positive rate of ∼3.5%–8.5% when realistic earthquake clustering is present, consistent with the 95% confidence typically used in seismology. However, when this false positive rate is applied to the tens of thousands of spatial-temporal windows in Southern California tested in DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 , thousands of false positives are expected. The expected false positive occurrence is large enough to explain the observed apparent triggering following 70% of large global earthquakes (DeSalvio & Fan, 2023, https://doi.org/10.1029/2023jb026487 ), without requiring any true dynamic triggering. Aside from the known triggering from the nearby El Mayor-Cucapah, Mexico, earthquake, the spatial and temporal characteristics of the reported triggering are indistinguishable from random false positives. This implies that best practice for dynamic triggering studies that depend on temporal correlation is to estimate the false positive rate and investigate whether the observed apparent triggering is distinguishable from the correlations that may occur by chance.

JGR Solid Earth↗
USGS2025

The Mammoth magnetic anomaly, Pinal County, Arizona

A high-resolution Earth Mapping Resources Initiative airborne geophysical survey was flown in the southwest North American porphyry copper province to improve bedrock geologic maps and to identify areas that have unrecognized critical mineral resource potential. During the review of the aeromagnetic data, a distinctly monopolar-shaped, negative magnetic anomaly was observed at a flight elevation of 200 m above the ground with a maximum amplitude of –9500 nT. We have named this the Mammoth magnetic anomaly (MMA) because it is centered 12 km northeast of the town of Mammoth, Arizona, USA. The total field anomaly (TFA) contour of –500 nT enclosing the MMA defines an elongate shape measuring 2.5 km long by 1 km wide that trends northwest–southeast. Given the striking nature of this negative, monopolar-shaped magnetic anomaly, we conducted a ground campaign in May 2025 to determine its authenticity and potential relationship to critical mineral endowment. The MMA was confirmed on the ground with a TFA approaching –46,000 nT. Total magnetic intensity (TMI) observations routinely fell below the 18,000 nT operating floor of an industry-standard cesium-vapor total field magnetometer, and extremely low TMI measurements were corroborated along coincident traverse lines using two high dynamic range, but lower sensitivity, smartphone vector magnetometers. The lowest TMI values recorded by both smartphone magnetometers were 1000 nT and confirmed with multiple adjacent and crossing lines. Field observations suggest that this magnetic feature is caused by strong remanent magnetization within fine-grained magnetite hosted within locally altered Pinal Schist.

Arizona↗
USGS2026

Development of liquefaction-targeted design basis in U.S. seismic provisions

Seismic design criteria for new buildings in the United States have historically focused on life safety performance objectives through minimizing the potential for structural collapse. Development of design criteria to meet this performance objective has evolved over time, leading to the current, risk-targeted maximum considered earthquake (MCE R ) design basis. Corresponding MCE R seismic design loads incorporate the full range of probabilistic ground motion hazard information available from U.S. Geological Survey National Seismic Hazard Models, as well as a representation of the uncertainty in structural collapse capacity. Despite these considerable advances in structural design criteria, guidelines for geotechnical hazards such as liquefaction-induced damage, which continue to be based on uniform ground-shaking hazard (i.e., MCE ground motions), are not well-connected with risk-based, collapse prevention performance objectives. This study, undertaken as part of Building Seismic Safety Council efforts to update recommended seismic provisions through the National Earthquake Hazards Reduction Program, presents probabilistic, liquefaction-targeted design objectives and corresponding ground motion parameters, with a focus on improving consistency in first-level screening criteria for liquefaction hazard assessment. This study identifies a potential maximum acceptable annualized probability of liquefaction triggering ( P L,max ) of 2.5% in 50 years, above which liquefaction consequences and potential mitigation measures would be considered. The P L,max -based design basis is calibrated to effective probabilistic liquefaction hazard levels obtained in practice using current MCE peak ground accelerations, and could be implemented via a new liquefaction-targeted maximum considered earthquake (MCE L ) peak ground acceleration ( PGA L ). The proposed PGA L is derived from probabilistic liquefaction hazard curves and includes uncertainties inherent to liquefaction hazard modeling. The potential design effects of the proposed PGA L are demonstrated via comparison with current MCE PGA levels, effects on first-level liquefaction screening analyses, and improvements in the consistency of P L,max levels across the United States, and for a wide range of site conditions.

conterminous United States↗
USGS2025

From critical minerals to food security, the benefits of data collaboration

The volume of data in the public geoscience sphere is rapidly and continually expanding. At Geoscience Australia (GA) we saw an over 500% increase in data points within our relational databases between 2018 and 2024, over the life of the Exploring for the Future (EFTF) program. With the Resourcing Australia’s Prosperity initiative, a continued increase in data quantity will be seen for the next 10 to 35 years. At the same time, a broadening audience for geoscience data is increasing the desire to enhance the diversity of delivery streams. This ranges from data-dense highly technical outputs for geoscience specialists to curated interpretive products for people who are non-geoscientists. Development of these curated outputs has contributed to our awareness of the need for data to be collected and compiled in a way that ensures its reuse, with a focus on quality metadata and data provenance.

Conference Paper↗
USGS2025

Impact of land subsidence on housing sale values: Evidence from the San Joaquin Valley, California

This study assesses the impact of land subsidence on housing sale values in the San Joaquin Valley, California. The study utilizes home sale transactions and vertical land-surface displacement data from Interferometric Synthetic Aperture Radar techniques. Using fine-scale fixed effects, matching, as well as a repeat-sales approach, our results indicate that land subsidence resulted in a 2.4% to 5.8% reduction in housing sale values, with the largest reductions occurring in areas where substantial subsidence occurred. Such findings may have implications for groundwater management and can potentially help inform policy design to help mitigate the causes and impacts of land subsidence.

California↗
USGS2026

Methodology for quantitative spatial sensitivity analysis of volcanic geodetic networks

Introduction This report introduces a methodology for assessing the state of the U.S. Geological Survey Volcano Observatories’ geodetic monitoring networks that measure how volcanoes deform or change shape. This new method uses a model-based approach that considers the uniqueness of the instrument environments at each volcano. This report focuses on simplified volcanic sources, is independent of the shape or size of the volcano, or the network geometry, and thus highlights the strengths and potential vulnerabilities of each volcano’s geodetic network in an actionable visual format. This analysis can help observatories to make informed decisions about whether volcanoes have an adequate level of geodetic monitoring and indicate where improvements are needed.

Lassen Peak, Mount Shasta↗