USGS Science⌕ Search

SEARCH · USGS Science

Results for “Deep Sea Research Part II: Topical Studies in Oceanography”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,615 records · Page 89Linked to original sources
USGS2024

2024 Crustal Deformation Modeling Workshop report

The 2024 Crustal Deformation Modeling Workshop was held June 10–14 at the Colorado School of Mines. The workshop included two days of tutorials on using PyLith for crustal deformation modeling, followed by three days of science talks and discussions. The workshop focused on four primary themes: ● Constraining long-term fault slip rates and their uncertainties using geodetic and geologic data; ● Earthquake cycle modeling with a focus on constraining models using seismic and geodetic data; ● Interaction of fluids and faulting; and ● Separating contributions of surface loading and tectonic loading in crustal deformation. The complete agenda is available on the CIG website.

Conference Paper↗
USGS2025

U.S. Geological Survey National Groundwater Climate Response Network

What is the U.S. Geological Survey National Groundwater Climate Response Network? The U.S. Geological Survey’s (USGS) National Water Monitoring Network is a network of networks that includes the Climate Response Network (CRN). The CRN is a network of wells selected to monitor the effects of climate variability, including droughts, on groundwater systems within the United States, Puerto Rico, and the U.S. Virgin Islands. The primary purpose of the CRN is to monitor these effects on groundwater levels in unconfined or near-surface confined aquifers that are minimally affected by pumping or other human-induced stresses.

Fact Sheet↗
USGS2024

Getting to the surface of the problem: A dynamic rupture benchmark for shallowly dipping faults near Earth’s surface

The Statewide California Earthquake Center (SCEC) Dynamic Rupture Group workshop “Getting to the Surface of the Problem: A Dynamic Rupture Benchmark for Shallowly-Dipping Faults Near Earth’s Surface” was convened virtually, in an online meeting on November 4, 2024. 52 people participated, including two who sent pre-recorded lightning talks earlier, but were unable to join us that day due to the international time-zone difference. One-half of our participants were students or postdocs, and the group included scientists from 11 countries (USA, Canada, China, Czech Republic, France, Germany, Iceland, Japan, New Zealand, Saudi Arabia, Switzerland).

Final Report↗
USGS2026

Efficient physics‐informed ground‐motion simulations with reduced‐order models: CyberShake implications and high‐resolution site terms for southern San Andreas fault earthquakes

Recent advances in Probabilistic Seismic Hazard Analysis (PSHA) leverage physics‐based ground‐motion simulations to estimate seismic hazard, such as the CyberShake project. However, computational costs quickly escalate when performing PSHA for numerous faults or sites and can become prohibitively expensive. To reduce computational demands, CyberShake uses reciprocity and interpolates physics‐informed corrections from simulations conducted at fewer locations, but the accuracy of these interpolations remains poorly quantified. To quantify the interpolation accuracy, we derive high‐resolution, frequency‐dependent site terms for southern California and compare them with interpolated site terms using the CyberShake approach. We accomplish this by performing a set of earthquake point‐source simulations distributed along the nonplanar fault geometry for the southern San Andreas fault (SSAF) extending from Bombay Beach to Lake Hughes. Using SeisSol, we simulate three minutes of viscoelastic seismic wave propagation for these sources and store the horizontal‐component Green’s functions for 480,000 sites. We then use a scientific machine learning approach based on interpolated proper orthogonal decomposition to construct an accurate reduced‐order model of the Green’s functions to efficiently predict effective amplitude spectra (EAS) for finite‐source rupture models of SSAF earthquakes. Using minimum curvature interpolation with tension, as used in CyberShake, we compare the interpolated site terms against our high‐resolution site terms. We identify local discrepancies with EAS differing by up to a factor of approximately three. Furthermore, we identify locations where unexpectedly high or low ground motions are missed when using the interpolated dataset for these earthquakes. We estimate that our approach may be used within CyberShake to reduce the time‐to‐solution by a factor of 336 for the entire earthquake rupture forecast. Our analysis of physics‐based site terms provides more insight into the seismic hazard due to SSAF ruptures and guides future developments by combining high‐performance computing and reduced‐order modeling techniques for PSHA.

California↗
USGS2026

Methodology for quantitative spatial sensitivity analysis of volcanic geodetic networks

Introduction This report introduces a methodology for assessing the state of the U.S. Geological Survey Volcano Observatories’ geodetic monitoring networks that measure how volcanoes deform or change shape. This new method uses a model-based approach that considers the uniqueness of the instrument environments at each volcano. This report focuses on simplified volcanic sources, is independent of the shape or size of the volcano, or the network geometry, and thus highlights the strengths and potential vulnerabilities of each volcano’s geodetic network in an actionable visual format. This analysis can help observatories to make informed decisions about whether volcanoes have an adequate level of geodetic monitoring and indicate where improvements are needed.

Lassen Peak, Mount Shasta↗
USGS2025

The U.S. Geological Survey, the U.S. Department of Defense, and the U.S. Intelligence Community—100 years of mapping and remote sensing collaboration, 1879–1979

Introduction The U.S. Geological Survey (USGS)—a Federal civilian agency—and U.S. military and intelligence agencies collaborate on mapping and remote sensing and have since the establishment of the USGS. The organizations exchange data and information and share technology to further their respective missions in service to the American people. Often referred to as examples of “good government” or “whole of government,” the collaboration avoids costly duplication and maximizes time and effort for the government sectors. Collaboration between these sectors started with the original mapping of the United States and evolved to include remote sensing after the advent of aerial photography and satellite imagery.

Circular↗
USGS2025

Cenozoic stratigraphy of Colorado

As a successor to previous Colorado stratigraphy charts (MS-53 Colorado Stratigraphic Chart and MS-54 Cretaceous Stratigraphy of Colorado), this Colorado Geological Survey (CGS) publication resulted from a collaboration between the CGS, USGS, and the Denver Museum of Nature and Science (DMNS). The chart was designed to illustrate Cenozoic stratigraphy spanning the state’s many sedimentary basins. It builds upon the work of dozens of colleagues and updates Richard Pearl’s seminal 1974 stratigraphy chart. The chart leverages the community’s stratigraphic work in both the subsurface and outcrop, and depicts new geochronologic constraints for many units. To facilitate comparison of strata to external forcing factors, the chart employs a linear timescale. Each unit’s dominant depositional environment is depicted, as are major mountain building events, erosional events, and regional unconformities.

Colorado↗
USGS2026

Velocity-independent dry friction on mica: A realization of ideal Amontons-Coulomb friction

The Amontons-Coulomb friction law assumes that the frictional force between materials is independent of sliding velocity. However, as Coulomb noted, this is a rough approximation, and a second-order dependence of friction on the logarithm of sliding velocity is incorporated in a commonly used ‘rate- and state-dependent’ friction representation. Here we conduct shear experiments on mica, a layer-structured mineral, at temperatures ranging from 25 to 200ºC and under normal stress of 100 MPa. The friction coefficient clearly depends on the logarithmic sliding velocity at 25ºC, but rate sensitivity decreases with increasing temperature until at 200ºC, the friction coefficient is independent of sliding velocity. Our findings could initiate the development of velocity-independent frictional materials, realizing the ideal Amontons-Coulomb friction.

Physical Review Letters↗
USGS2026

Low-frequency earthquakes track the motion of a captured slab fragment

Accurate tectonic models are essential for assessing seismic hazard and fault interactions. However, the plate configuration at the complex Mendocino triple junction, where the San Andreas Fault and the Cascadia subduction zone meet, remains uncertain. We analyzed fault slip associated with a recently identified zone of tectonic tremor and low-frequency earthquakes (LFEs) near the southern edge of the subducting Gorda slab. Based on tidal sensitivity and P-wave first motions, we show that the LFEs are generated by dipping, strike-slip motion. This suggests that a former Farallon slab fragment, now captured by the Pacific plate, is translating northward beneath westernmost North America. This geometry effectively extends the slab interface fault, challenging prevailing interpretations of slab window formation and creating a potential unaccounted earthquake hazard in this region.

Science↗
USGS2026

USGS Geochron Database

Introduction Geochronology helps us understand Earth’s history by determining when important events, like volcanic eruptions, the rise of mountains, the formation of mineral resources, and changes in the landscape, happened. Geochronological data directly support geologic mapping and can inform decisions about geologic hazard mitigation, natural resource management, and infrastructure resilience. The U.S. Geological Survey (USGS) Geochron database provides access to more than 300,000 published, publicly available age measurements from more than 40,000 geological samples. This database is the result of a collaborative effort with State geological surveys and geoscientists from across the globe. The USGS Geochron database is the most comprehensive collection of geochronological data available for the United States. Users can view data through an interactive map explorer, download datasets, and integrate data into geospatial software or other analysis tools.

Fact Sheet↗
USGS1976

Diamond drilling at the Ma'milah Mine, Kingdom of Saudi Arabia

The Ma'millah gold mine is about 90 km southeast of At Ta'if at lat 21°03'N., long 41°18'E., in southwestern Saudi Arabia. The deposit, which was worked extensively by ancient miners, consists of several veins and massive lenses of quartz along a regional fault. The extensive ancient mine workings, large size of some quartz outcrops, and significant gold content of several samples indicated that subsurface exploration was warranted. Accordingly, two holes were drilled into the deposit during the interval December 1972 to February 1973. The drill findings were disappointing; the grade of vein material was found to be too low to be of economic interest and the quartz bodies were found to pinch out both along strike and downdip. The drilling program therefore was terminated. The deposit is not worth further exploration

Ma'milah Mine↗
USGS2024

Using geologic mapping to understand temporal and spatial relations of closely clustered to concurrent latest Holocene surface ruptures on two intersecting faults, south-central Mojave Desert, California

The Pinto Mountain Fault Zone (PMFZ) marks a major structural boundary between east-oriented sinistral faults of the eastern Transverse Ranges (to the south) and northwest-oriented dextral faults of the south-central Mojave Desert (to the north). These structural fault systems comprise sinistral and dextral deformational domains of the Eastern California Shear Zone (ECSZ) that intersect one another in the Copper Mountain and Twentynine Palms areas. The U.S. Geological Survey (USGS) is conducting detailed geologic mapping and geochronologic investigations designed to clarify geometric, kinematic, and temporal relations among the two domains, that are focused on the central portion of the left-lateral PMFZ near its intersection with the right-lateral Copper Mountain Fault (CMF) and Mesquite Lake Fault Zone (MLFZ).

California↗
USGS2024

Field observations and logs from the Rose Hip trench exposure across a north-facing scarp within the Seattle Fault Zone, southern Bainbridge Island, Washington

The Seattle Fault Zone is an approximately 70-km-long, east-west-trending zone of south-dipping blind reverse faults within the Puget lowland region in Washington. Because of the proximity, the Seattle Fault Zone poses a significant earthquake hazard to the Puget sound and Seattle metropolitan regions. We present preliminary mapping and trench-site information from a paleoseismic investigation across a newly identified active fault scarp located within the hanging wall of the Seattle Fault Zone on southern Bainbridge Island, Washington. The trench exposed monoclinally folded Miocene bedrock, fractured and faulted glacial-related deposits, and laminated lacustrine deposits capped by slope-derived colluvium. The observations from this investigation record late Pleistocene to Holocene north-vergent folding and faulting along this new fault scarp.

Washington↗
USGS2026

Open-source gravity reduction workflows for geothermal resource assessment

Potential-field geophysical data such as gravity can enhance understanding of geothermal resources at all stages of the resource life cycle, including assessment, exploration, development, and monitoring, and at multiple scales, from the reservoir scale to regional scale. However, to make gravity data useful for geothermal resource characterization, several processing steps are required to isolate the effects of density variations in the Earth’s crust to enable the identification of structural features associated with geothermal resources. Although this process is well-established, standard computational implementations for processing gravity data that are FAIR (Findable, Accessible, Interoperable, and Reproduceable) are still lacking. This paper details ongoing efforts at the U.S. Geological Survey (USGS) to develop a standard set of open-source Python tools for gravity data reduction that align with the FAIR principles. This workflow makes use of existing open-source tools for geophysical data processing with the goal of maximizing opportunities for rapid improvements, interoperability, and adaptability to other types of geophysical data.

Conference Paper↗
USGS2025

Estimating the probability of export restrictions to inform mineral criticality

To assess risks associated with advanced technologies’ supply chain disruptions, governmental agencies and others have developed mineral “criticality” assessments, with criticality described using the economic impact and probability of supply chain disruptions. Previous work developed subjective supply risk indicators to approximate this probability, typically combining several factors such as supply diversity and trading partners’ political stability, where indicator weightings can substantially impact results. This work explicitly quantifies export barrier probability using an ensemble of machine learning classifiers, with probability estimates informed by exogenous variables, including prior barrier implementation and global export dominance. Major differences in high-probability countries and commodities are observed across models, but the ensemble method highlights Indonesia, China, Tanzania, and the United States as particularly high risk. The Supplementary Data File provides export barrier probability estimates for each analyzed country-commodity pair, enabling a direct, quantitative, objective contribution to assessing mineral criticality, enhancing risk identification and prioritization for policymakers.

Resources, Conservation, and Recycling↗
USGS2025

Flood-Inundation Maps of the Current and Jacks Fork Rivers including the Ozark National Scenic Riverways, Southeast Missouri, 2023

Digital flood-inundation maps for a 131.8-mile reach of the Current River and a 44.6-mile reach of the Jacks Fork River, in southeast Missouri, were created by the U.S. Geological Survey (USGS) in cooperation with the Ozark Foothills Regional Planning Commission and the South Central Ozark Council of Governments. The maps also encompass the 134 miles of the Current and Jacks Fork Rivers within the Ozark National Scenic Riverways, which is the first national park area to protect a river system. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (hereafter referred to as “stages”) at eight reference USGS streamgages—five on the Current River (USGS station numbers 07064440, 07064533, 07066510, 07067000, and 07068000) and three on the Jacks Fork River (USGS station numbers 07065200, 07065495, and 07066000). Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or the National Weather Service National Water Prediction Service at http://water.noaa.gov/ , which also forecasts flood hydrographs at four of these sites (USGS station numbers 07067000, 07068000, 07065495, and 07066000). Flood profiles were computed for seven of the eight map reaches by means of two-dimensional hydraulic models and the remaining reach by a one-dimensional hydraulic model. The models were calibrated by using stage-streamflow relations or streamflow measurements at the USGS streamgages and from high-flow stage measurements from water-level loggers distributed throughout the reaches. The hydraulic models were used to compute water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datums. The profile stages ranged from the National Weather Service “action stage” or near bankfull, to a stage exceeding the highest recorded water level at each streamgage. The simulated water-surface profiles were then combined with a digital elevation model (derived from light detection and ranging data having a nonvegetated vertical accuracy of a maximum 10-centimeter root mean square error) to delineate the area flooded at each water level and the associated water depths. The availability of these maps, along with information regarding current stage from the USGS streamgage and forecasted high-flow stages from the National Weather Service, will provide emergency management personnel, resource managers, and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Missouri↗
USGS2025

Prospectivity modeling of the NASA VIPER landing site at Mons Mouton near the Lunar South Pole

We use a high-resolution digital elevation model and a numerical thermal model to produce a variety of inputs for a water-ice prospectivity model for the Volatiles Investigating Polar Exploration Rover (VIPER) landing site. These input data are maps of topography, surface slope, surface aspect, surface curvature, maximum temperature, depth to ice stability, permanently shadowed regions (PSRs), distance to PSRs, and PSR density. This model predicts where water ice is most likely within the top meter of regolith, assuming plausible relationships between ice concentration and the various inputs. The model is designed to be adjusted in near-real time as data are collected during the VIPER mission. As such, it is a tool for both analyzing data from the mission as well as planning operations. Since the current model, at this point, relies only on orbital remote sensing, the final version will also be a tool to extrapolate the VIPER mission results across the lunar poles.

Planetary Science Journal↗
USGS2024

Relatively stable pressure effects and time-increasing thermal contraction control Heber geothermal field deformation

Due to geological complexities and observational gaps, it is challenging to identify the governing physical processes of geothermal field deformation including ground subsidence and earthquakes. In the west and east regions of the Heber Geothermal Field (HGF), decade-long subsidence was occurring despite injection of heat-depleted brines, along with transient reversals between uplift and subsidence. These observed phenomena contradict current knowledge that injection leads to surface uplift. Here we show that high-yield production wells at the HGF center siphon fluid from surrounding regions, which can cause subsidence at low-rate injection locations. Moreover, the thermal contraction effect by cooling increases with time and eventually overwhelms the pressure effects of pressure fluctuation and poroelastic responses, which keep relatively stable during geothermal operations. The observed subsidence anomalies result from the siphoning effect and thermal contraction. We further demonstrate that thermal contraction dominates long-term trends of surface displacement and seismicity growth, while pressure effects drive near-instantaneous changes.

California↗