SEARCH · USGS Science

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,585 records · Page 88Linked to original sources

USGS2023

“Aftershock Faults” and what they could mean for seismic hazard assessment

We study stress‐loading mechanisms for the California faults used in rupture forecasts. Stress accumulation drives earthquakes, and that accumulation mechanism governs recurrence. Most moment release in California occurs because of relative motion between the Pacific plate and the Sierra Nevada block; we calculate relative motion directions at fault centers and compare with fault displacement directions. Dot products between these vectors reveal that some displacement directions are poorly aligned with plate motions. We displace a 3D finite‐element model according to relative motions and resolve stress tensors onto defined fault surfaces, which reveal that poorly aligned faults receive no tectonic loading. Because these faults are known to be active, we search for other loading mechanisms. We find that nearly all faults with no tectonic loading show increase in stress caused by slip on the San Andreas fault, according to an elastic dislocation model. Globally, faults that receive a sudden stress change respond with triggered earthquakes that obey an Omori law rate decay with time. We therefore term this class of faults as “aftershock faults.” These faults release ∼4% of the moment release in California, have ∼0.1%–5% probability of M 6.7 earthquakes in 30 yr, and have a 0.001%–1% 30 yr M 7.7 probability range.

California↗

USGS1994

Slip triggered on southern California faults by the 1992 Joshua Tree, Landers, and big bear earthquakes

Five out of six functioning creepmeters on southern California faults recorded slip triggered at the time of some or all of the three largest events of the 1992 Landers earthquake sequence. Digital creep data indicate that dextral slip was triggered within 1 min of each mainshock and that maximum slip velocities occurred 2 to 3 min later. The duration of triggered slip events ranged from a few hours to several weeks. We note that triggered slip occurs commonly on faults that exhibit fault creep. To account for the observation that slip can be triggered repeatedly on a fault, we propose that the amplitude of triggered slip may be proportional to the depth of slip in the creep event and to the available near-surface tectonic strain that would otherwise eventually be released as fault creep. We advance the notion that seismic surface waves, perhaps amplified by sediments, generate transient local conditions that favor the release of tectonic strain to varying depths. Synthetic strain seismograms are presented that suggest increased pore pressure during periods of fault-normal contraction may be responsible for triggered slip, since maximum dextral shear strain transients correspond to times of maximum fault-normal contraction.

California↗

USGS1997

Structural underpinnings and neotectonics of the southern Illinois Basin: An overview

The southern end of the Illinois Basin is one of the most structurally complex regions in the Midcontinent United States. Two major structural elements characterize this part of the basin: (1) A broad southwestward-plunging cratonic depression extends across central Illinois and southwestern Indiana. Investigations of historical and prehistorical earthquakes in this part of the basin indicate that moderate to high earthquake potential exists; the seismogenic sources, however, remain enigmatic. (2) The southernmost part of the basin is underlain by the Reelfoot Rift and Rough Creek Graben, a rift system that formed during late Precambrian to Middle Cambrian time. Geodynamic processes operating within the rift since the late Precambrian have had a major influence on the tectonic, diagenetic, and depositional history of the region. In addition, tectonic compressive stress appears to be reactivating ancient faults within the Reelfoot Rift, resulting in coherent linear segments of earthquake epicenters called the New Madrid Seismic Zone. Geological and geophysical information suggests that the cause of earthquakes in the New Madrid Seismic Zone is unrelated to that in the region north of the rift system.

Illinois, Indiana, Kentucky, Missouri↗

USGS1997

Seismic evidence of Quaternary faulting in the Benton Hills area, southeast Missouri

Two reflection seismic profiles at English Hill, across the southern edge of the Benton Hills escarpment, southeast Missouri, establish that geologic structures at English Hill are of tectonic origin. The lowland area to the south of the escarpment is relatively undisturbed. The geology at English Hill is structurally complex, and reflection seismic and geologic data indicate extensive and episodic faulting of Paleozoic, Cretaceous, Tertiary, and Quaternary strata. The individual faults have near-vertical fault surfaces with maximum vertical separations on the order of 15 m. They appear to be clustered in north-northeast trending zones that essentially parallel one of the dominant Benton Hills structural trends. These observations suggest that previously mapped Quaternary faults at English Hill are deep-seated and tectonic in origin. This paper documents recent faulting at English Hill and is the first time late Quaternary, surface-rupture faulting has been recognized in the middle Mississippi River Valley region outside of the New Madrid seismic zone. This has important implications for earthquake assessment in the midcontinent.

Missouri↗

USGS2000

Preliminary report on the 16 October 1999 M 7.1 Hector mine, California, earthquake

The M w 7.1 Hector Mine, California, earthquake occurred at 9:46 GMT on 16 October 1999. The event caused minimal damage because it was located in a remote, sparsely populated part of the Mojave Desert, approximately 47 miles east-southeast of Barstow, with epicentral coordinates 34.59°N 116.27°W and a hypocentral depth of 5 ± 3 km. Twelve foreshocks, M 1.9-3.8, preceded the mainshock during the previous twelve hours. All of these events were located close to the hypocenter of the mainshock. The Hector Mine earthquake occurred within the Eastern California Shear Zone (ECSZ). By virtue of its remote location, the societal impact of the Hector Mine earthquake was, fortunately, minimal in spite of the event's appreciable size. The ECSZ is characterized by high seismicity, a high tectonic strain rate, and a broad, distributed zone of north-northwest-trending faults (ECSZ; Figure 1 ; Dokka and Travis, 1990 ; Sauber et al., 1986 ; Sauber et al., 1994 ; Sieh et al., 1993 ). Data regarding the slip rates of faults within the ECSZ suggest that on the order of 15% of the Pacific-North American plate motion occurs along this zone ( Sauber et al., 1986 ; Wesnousky, 1986 ). Most of the faults in the ECSZ have low slip rates and long repeat times for major earthquakes, on the order of several thousands to tens of thousands of years. The occurrence of the Hector Mine earthquake within seven years and only about 30 km east of the 1992 M w 7.3 Landers earthquake suggests that the closely spaced surface faults in the ECSZ are mechanically related. The Hector Mine event involved rupture on two previously mapped fault zones—the Bullion Fault and an unnamed, more northerly-trending fault that is informally referred to in this paper as the Lavic Lake Fault (Dibblee, 1966 , 1967a , b ). Traces of the Bullion Fault exhibit evidence of Holocene displacement and were zoned as active in 1988 under California's Mquist-Priolo Earthquake Fault Zoning Act ( Hart and Bryant, 1997 ). The pattern of rupture along more than one named fault was also observed from the 1992 Landers earthquake ( Hauksson et al., 1993 ; Sieh et al., 1994). Much of the fault zone that produced the Hector Mine earthquake had been buried by relatively young stream deposits, and the fault scarps in bedrock have a subdued morphology. It appears that these faults have not experienced significant offset for perhaps 10,000 years or more ( Hart, 1987 ). Planned future investigations will refine the age of the last event on these faults. The portion of the Lavic Lake Fault that ruptured between the northern end of the Bullion Mountains and Lavic Lake had not previously been mapped. However, our field investigations have identified ancient, subdued fault scarps along portions of the 1999 rupture zone in this area. It thus appears that the entire segment of the Lavic Lake Fault that was involved in the 1999 event had ruptured in the past. As is typical for most faults within the Eastern California Shear Zone, the rate of movement along the Lavic Lake Fault may be quite slow (<1 mm/yr) and should produce earthquakes only infrequently. This event is a reminder that faults that have ruptured in late Quaternary time, but that lack evidence of Holocene displacement, can still produce earthquakes in this low-slip-rate tectonic setting. Additionally, the Hector Mine earthquake is noteworthy for a couple of other reasons. First, it clearly produced triggered seismicity over much of southern California, from the rupture zone toward the south-southwest in particular. Second, as we will discuss, the event may provide new data and insight into recently developed paradigms concerning earthquake interactions and the role of static stress changes. Questions such as these will, of course, be the subject of extensive detailed analyses in years to come. Fortunately, the Hector Mine sequence will provide one of the best data sets obtained to date for a significant earthquake in the United States. Because it occurred when major upgrades to both the regional seismic network (TriNet) and the regional geodetic network (SCIGN) were well underway, the Earth science community will have abundant high-quality data with which to explore the important and interesting questions that have been raised. In this paper, we present and discuss the basic data and preliminary results from the Hector Mine earthquake.

California↗

USGS2008

The 8 October 2006 Md 4.5 Cowlitz chimneys earthquake in Mount Rainier National Park

An M d 4.5 earthquake located ∼12 km east of Mount Rainier occurred on 8 October 2006 at 02:48 UTC ( figure 1 ). Although not large enough to be damaging or of major tectonic significance, a summary description of the earthquake is warranted because of its proximity to Mount Rainier, and because earthquakes of M d ≥ 4.5 are relatively rare in this region. Previous events of M d ≥ 4.5 have occurred approximately once a decade within a radius of ∼60 km from this mainshock, with the closest and most recent prior earthquake being an M d 4.9 event located 46 km to the southwest in 1989. Magnitudes in this paper refer to the coda duration magnitude determined by the Pacific Northwest Seismic Network (PNSN) ( Crosson 1972 ). We refer to the 2006 event as the “Cowlitz Chimneys” earthquake because it occurred beneath the Cowlitz Chimneys, a prominent ridge in Mount Rainier National Park. This paper describes the mainshock's focal mechanism and its aftershock distribution. The inferred source mechanism, its ordinary aftershock sequence, and the lack of significant triggered seismicity near the volcanic edifice lead us to conclude that this was a regular tectonic crustal earthquake rather than one related to volcanic processes.

Seismological Research Letters↗

USGS2011

Developing seismogenic source models based on geologic fault data

Calculating seismic hazard usually requires input that includes seismicity associated with known faults, historical earthquake catalogs, geodesy, and models of ground shaking. This paper will address the input generally derived from geologic studies that augment the short historical catalog to predict ground shaking at time scales of tens, hundreds, or thousands of years (e.g., SSHAC 1997). A seismogenic source model, terminology we adopt here for a fault source model, includes explicit three-dimensional faults deemed capable of generating ground motions of engineering significance within a specified time frame of interest. In tectonically active regions of the world, such as near plate boundaries, multiple seismic cycles span a few hundred to a few thousand years. In contrast, in less active regions hundreds of kilometers from the nearest plate boundary, seismic cycles generally are thousands to tens of thousands of years long. Therefore, one should include sources having both longer recurrence intervals and possibly older times of most recent rupture in less active regions of the world rather than restricting the model to include only Holocene faults (i.e., those with evidence of large-magnitude earthquakes in the past 11,500 years) as is the practice in tectonically active regions with high deformation rates. During the past 15 years, our institutions independently developed databases to characterize seismogenic sources based on geologic data at a national scale. Our goal here is to compare the content of these two publicly available seismogenic source models compiled for the primary purpose of supporting seismic hazard calculations by the Istituto Nazionale di Geofisica e Vulcanologia (INGV) and the U.S. Geological Survey (USGS); hereinafter we refer to the two seismogenic source models as INGV and USGS, respectively. This comparison is timely because new initiatives are emerging to characterize seismogenic sources at the continental scale (e.g., SHARE in the Euro-Mediterranean, http://www.share-eu.org/; EMME in the Middle East, http://www.emme-gem.org/) and global scale (e.g., GEM, http://www.globalquakemodel.org/; Anonymous 2008). To some extent, each of these efforts is still trying to resolve the level of optimal detail required for this type of compilation. The comparison we provide defines a common standard for consideration by the international community for future regional and global seismogenic source models by identifying the necessary parameters that capture the essence of geological fault data in order to characterize seismogenic sources. In addition, we inform potential users of differences in our usage of common geological/seismological terms to avoid inappropriate use of the data in our models and provide guidance to convert the data from one model to the other (for detailed instructions, see the electronic supplement to this article). Applying our recommendations will permit probabilistic seismic hazard assessment codes to run seamlessly using either seismogenic source input. The USGS and INGV database schema compare well at a first-level inspection. Both databases contain a set of fields representing generalized fault three-dimensional geometry and additional fields that capture the essence of past earthquake occurrences. Nevertheless, there are important differences. When we further analyze supposedly comparable fields, many are defined differently. These differences would cause anomalous results in hazard prediction if one assumes the values are similarly defined. The data, however, can be made fully compatible using simple transformations.

Seismological Research Letters↗

USGS2012

Predicted eelgrass response to sea level rise and its availability to foraging Black Brant in Pacific coast estuaries

Managers need to predict how animals will respond to habitat redistributions caused by climate change. Our objective was to model the effects of sea level rise on total eelgrass ( Zostera marina ) habitat area and on the amount of that area that is accessible to Brant geese ( Branta bernicla ), specialist grazers of eelgrass. Digital elevation models were developed for seven estuaries from Alaska, Washington, California (USA), and Mexico. Scenarios of future total eelgrass area were derived from combinations of estuarine specific sediment and tectonic rates (i.e., bottom change rate) with three rates of eustatic sea level rise (ESLR). Percentages of total eelgrass areas that were accessible to foraging Brant were determined for December when the birds overwinter at more southerly sites and in April as they move north to sites where they build body stores on their way to nesting areas in Alaska. The modeling showed that accessible eelgrass area could be lower than total area due to how daytime low-tide height, eelgrass shoot length, and the upper elevation of eelgrass determined Brant-reaching depth. Projections of future eelgrass area indicated that present-day ESLR (2.8 mm/yr) and bottom change rates should sustain the current pattern of estuarine use by Brant except in Morro Bay, where use should decrease because eelgrass is being ejected from this estuary by a positive bottom change rate. Higher ESLR rates (6.3 and 12.7 mm/yr) should result in less Brant use of estuaries at the northern and southern ends of the flyway, particularly during the winter, but more use of mid-latitude estuaries. The capacity of mid-latitude estuaries to function as Brant feeding refugia, or for these estuaries and Izembek Lagoon to provide drift rather than attached leaves, is eventually limited by the decrease in total eelgrass area, which is a result of a light extinction affect on the eelgrass, or the habitat being pushed out of the estuary by positive tectonic rates. Management responses are limited to the increase or decrease of sediment supply and the relocation of levees to allow for upslope migration of eelgrass habitat.

Alaska;California;Washington↗

USGS2003

Influence of climate on deep-water clastic sedimentation: application of a modern model, Peru-Chile Trough, to an ancient system, Ouachita Trough

Traditionally, an abrupt and massive influx of siliciclastic sediments into an area of deposition has been attributed to tectonic uplift without consideration of the influence of climate or climatic change on rates of weathering, erosion, transportation, and deposition. With few exceptions, fluvial sediment transport is minimal in both extremely arid climates and in perhumid (everwet) climates. Maximum sediment transport occurs in climates characterized by strongly seasonal rainfall, where the effect of vegetation on erosion is minimal. The Peru–Chile trench and Andes Mountain system (P–CT/AMS) of the eastern Pacific Ocean clearly illustrates the effects of climate on rates of weathering, erosion, transport, and deep-sea sedimentation. Terrigenous sediment is virtually absent in the arid belt north of lat. 30° S in the P–CT, but in the belt of seasonal rainfall south of lat. 30° S terrigenous sediment is abundant. Spatial variations in the amount and seasonality of annual precipitation are now generally accepted as the cause for this difference. The spatial variation in sediment supply to the P–CT appears to be an excellent modern analogue for the temporal variation in sediment supply to certain ancient systems, such as the Ouachita Trough in the southern United States. By comparison, during the Ordovician through the early Mississippian, sediment was deposited at very slow rates as the Ouachita Trough moved northward through the southern hemisphere dry belt (lat. 10° S to lat. 30° S). The deposystem approached the tropical humid zone during the Mississippian, coincident with increased coarse clastic sedimentation. By the Middle Pennsylvanian (Atokan), the provenance area and the deposystem moved well into the tropical humid zone, and as much as 8,500 m of mineralogically mature (but texturally immature) quartz sand was introduced and deposited. This increase in clastic sediment deposition traditionally has been attributed solely to tectonic activity. However, we contend that the principal control on the introduction of abundant terrigenous sediment was the movement of the deposystem from an arid or semiarid climate into a seasonally wetter climatic regime. The physical and mineralogical maturity of the quartz sand is the result of tropical weathering in provenance areas.

Climate Controls on Stratigraphy: SEPM Special Pub↗

USGS2005

Diagenesis and late-stage porosity development in the Pennsylvanian Strawn Formation, Val Verde basin, Texas, U.S.A

The Middle Pennsylvanian (Desmoinesian) Strawn Formation in the Trans-Pecos area of Texas was deposited during relative tectonic quiescence that prevailed before rapid infilling of the Val Verde Basin. It represents one of a series of backstepping carbonate ramps formed on the craton side of this foreland basin. Strawn Formation carbonate rocks in three cores - Conoco Anna McClung #3-1, Alex Mitchell S2-1R, and Creek Ranch #10-1 - show several shallowing-up ward sequences, each a few meters thick. The Creek Ranch core displays the deepest-water characteristics of the three cores; the lower part of this core is dominated by graded bedding. The Mitchell and McClung cores contain skeletal-rich carbonates. Both of these cores display characteristics of shallow-water bank or lagoonal environments. All three cores have approximately the same diagenetic history. Primary fluid inclusions indicate early porosity-occluding interparticle and mold-filling calcite precipitated from water with a narrow range of salinities. Modal salinities are that of seawater, but slightly lesser salinities (indicating mixing of seawater and meteoric water) and slightly greater salinities (indicating evaporative concentration of seawater) are also indicated. The influence of meteoric groundwater can be detected by stable-isotope analyses of the early cements at stratigraphic levels that correlate to the tops of the major shallowing-upward depositional sequences. However, subaerial exposure surfaces are not demonstrated in these cores but were likely to be present updip. Most porosity is cement-reduced vugs, dissolution-enlarged (and cement-reduced) molds (> 1/16 mm, < 4 mm), and fractures. Minor intraparticle, intercrystalline, and shelter porosity is also present. Reservoir porosity is caused by fracturing and a late-stage dissolution event. Dissolution in the Creek Ranch core is not as pronounced as in the other cores because of a dearth of skeletal material. Porous zones in the McClung and Mitchell cores are associated with open fractures spatially, which commonly interconnect with nearby molds and vugs. This complex porosity system occurred after stylolitization, as evidenced by "cuticles" of insoluble styloliticresidue thatbridge across small dissolution-enlarged fractures. Porosity detected by wireline logs therefore is mostly effective porosity. The open-fracture network may have been caused by thrusting of the Strawn Formation, most likely in Permian time. Late-stage cement reduction of porosity occurs in two stages-first by calcite spar, then saddle dolomite. These cements are unevenly distributed. Both of these cements contain primary oil-filled fluid inclusions. Homogenization temperatures of primary aqueous fluid inclusions in saddle dolomites indicate that the Strawn Formation has been subjected to a temperature of at least 136??C (roughly 45??C over present formation temperature), which correlates to a vitrinite reflectance equivalent of 1.22%. Homogenization temperatures, in conjunction with oxygen isotope compositions, indicate that fracture-filling calcite spars and the later saddle dolomites precipitated from isotopically positive fluids, which were probably connate waters that had undergone extensive rock-water interaction. These observations suggest that thrusting of carbonate shelf strata, in a proximal foreland setting, was responsible for creation of latestage fracture porosity. In turn, tectonic expulsion of undersaturated, heated, connate water into the Strawn Formation enhanced the porosity. As this expulsed water cooled, it reached saturation with respect to calcite and dolomite, and these cements partly filled the available porosity. These processes of reservoir creation might be expected in other proximal foreland settings.

Texas↗

USGS1991

Initiation processes and flow evolution of turbidity currents: Implications for the depositional record

Interpretations of sea-level change and source-area tectonism from the character of turbidite deposits require knowledge of the sediment source, the flow-initiation process, how the turbidity current evolved during flow, and what flow phases were associated with deposition. The flow responds to shape and size characteristics of both the erosional pathway and the morphology of previous deposits; these, in turn, reflect factors such as basin size, shape, and tectonic activity. The initiation of turbidity currents generally involves either transformation from mass failures or one of a variety of fluid-flow events involving ignitive flow. The variability of these initiating processes with geologic setting is illustrated by analysis of three case studies involving 1) initiation by storm surge on a carbonate-reef slope, 2) a seismically triggered failure of a line source within midslope sediment, and 3) a bedload delta showing both hyperpycnal flow of river bedload and failure of unstable prodelta sediment. General criteria for the initiation of turbidity currents are given. Depositional and erosional features of the turbidite deposits themselves allow recognition of changes in flow processes as the turbidity currents traverse the basin. High-concentration basal flow beneath the main turbulent turbidity current will leave a distinctive depositional record from more energetic flow, particularly in proximal and channel settings. Turbidity currents of different sizes and sediment distribution interact quite differently with local fan morphology. Many large, muddy turbidity currents are much thicker than levee-channel relief; the upper parts of such flows are "stripped off" across levees and can become rechannelized farther downslope. in restricted basins, the basin margin acts like a channel wall for larger flows, thus maintaining competence over long distances. Thinner, sandier flows flush out channel systems, and a large proportion of sediment in some turbidite deposits may be derived from bed erosion. A broad range of local bedforms, especially sediment waves and scours, reflects changes in the character of turbulence and competence within quasi-steady flows. This paper emphasizes the broad range of size, sediment distribution, and depositional processes in turbidity currents that largely reflects the variety of initiation processes. This variability means that caution is needed when interpreting depositional conditions of ancient turbidite sediment with ill-defined morphologic setting.

Book chapter↗

USGS2014

Carbonate margin, slope, and basin facies of the Lisburne Group (Carboniferous-Permian) in northern Alaska

The Lisburne Group (Carboniferous-Permian) consists of a carbonate platform that extends for >1000 km across northern Alaska, and diverse margin, slope, and basin facies that contain world-class deposits of Zn and Ba, notable phosphorites, and petroleum source rocks. Lithologic, paleontologic, isotopic, geochemical, and seismic data gathered from outcrop and subsurface studies during the past 20 years allow us to delineate the distribution, composition, and age of the off-platform facies, and to better understand the physical and chemical conditions under which they formed. The southern edge of the Lisburne platform changed from a gently sloping, homoclinal ramp in the east to a tectonically complex, distally steepened margin in the west that was partly bisected by the extensional Kuna Basin (~200 by 600 km). Carbonate turbidites, black mudrocks, and radiolarian chert accumulated in this basin; turbidites were generated mainly during times of eustatic rise in the late Early and middle Late Mississippian. Interbedded black mudrocks (up to 20 wt% total organic carbon), granular and nodular phosphorite (up to 37 wt% P 2 O 5 ), and fine-grained limestone rich in radiolarians and sponge spicules formed along basin margins during the middle Late Mississippian in response to a nutrient-rich, upwelling regime. Detrital zircons from a turbidite sample in the western Kuna Basin have mainly Neoproterozoic through early Paleozoic U-Pb ages (~900-400 Ma), with subordinate populations of Mesoproterozoic and late Paleoproterozoic grains. This age distribution is similar to that found in slightly older rocks along the northern and western margins of the basin. It also resembles age distributions reported from Carboniferous and older strata elsewhere in northwestern Alaska and on Wrangel Island. Geochemical and isotopic data indicate that suboxic, denitrifying conditions prevailed in the Kuna Basin and along its margins. High V/Mo, Cr/Mo, and Re/Mo ratios (all marine fractions [MF]) and low MnO contents (<0.01 wt%) characterize Lisburne black mudrocks. Low Qmf/Vmf ratios (mostly 0.8-4.0) suggest moderately to strongly denitrifying conditions in suboxic bottom waters during siliciclastic and phosphorite sedimentation. Elevated to high Mo contents (31-135 ppm) in some samples are consistent with seasonal to intermittent sulfidic conditions in bottom waters, developed mainly along the basin margin. High d 15 N values (6-120) imply that the waters supplying nutrients to primary producers in the photic zone had a history of denitrification either in the water column or in underlying sediments. Demise of the Lisburne platform was diachronous and reflects tectonic, eustatic, and environmental drivers. Southwestern, south-central, and northwestern parts of the platform drowned during the Late Mississippian, coincident with Zn and Ba metallogenesis within the Kuna Basin and phosphogenesis along basin margins. This drowning was temporary (except in the southwest) and likely due to eutrophication associated with upwelling and sea-level rise enhanced by regional extension, which allowed suboxic, denitrifying waters to form on platform margins. Final drowning in the southcentral area occurred in the Early Pennsylvanian and also may have been linked to regional extension. In the northwest, platform sedimentation persisted into the Permian; its demise there appears to have been due to increased siliciclastic input. Climatic cooling may have produced additional stress on parts of the Lisburne platform biota during Pennsylvanian and Permian times.

Alaska↗

USGS2020

Cordilleran subduction initiation: Retro-arc timing and basinal response in the Inyo Mountains, eastern California

Subduction zones drive plate tectonics on Earth, yet subduction initiation and the related upper plate depositional and structural kinematics remain poorly understood because upper plate records are rare and often strongly overprinted by magmatism and deformation. During the late Paleozoic time, Laurentia’s western margin was truncated by a sinistral strike-slip fault that transformed into a subduction zone. Thick Permian strata in the Inyo Mountains of central-eastern California record this transition. Two basins that were separated by a transpressional antiform contain sedimentary lithofacies that record distinct patterns of shoaling and deepening conditions before and during tectonism associated with subduction initiation. Sandstone petrography and lithofacies analysis show that rocks in a southeastern basin are dominated by carbonate grains derived from adjacent carbonate shelves, whereas sandstones in a northwestern basin are predominantly quartzose with likely derivation from distant ergs or underlying strata. Detrital zircon spectra from all but the youngest strata in both basins are typical of Laurentian continent spectra with prominent peaks that indicate ultimate sources in Appalachia, Grenville, Yavapai/Mazatzal, and the Wyoming or Superior cratons. The first Cordilleran arc-derived detrital zircon grains appear in the uppermost strata of the northwestern basin and record Late Permian (ca. 260 Ma) Cordilleran arc magmatism at this approximate latitude, and a possible source area is suggested by geochemical similarities between these detrital zircons and broadly coeval magmatic zircons in the El Paso Mountains to the southwest. Deformation responsible for basin partitioning is consistent with sinistrally oblique contraction in the earliest Permian time. The data presented from the Inyo Mountains shed more light on the nature of Cordilleran subduction initiation and the upper-crustal response to this transition.

California↗

USGS2001

Remnant colloform pyrite at the haile gold deposit, South Carolina: A textural key to genesis

Auriferous iron sulfide-bearing deposits of the Carolina slate belt have distinctive mineralogical and textural features-traits that provide a basis to construct models of ore deposition. Our identification of paragenetically early types of pyrite, especially remnant colloform, crustiform, and layered growth textures of pyrite containing electrum and pyrrhotite, establishes unequivocally that gold mineralization was coeval with deposition of host rocks and not solely related to Paleozoic tectonic events. Ore horizons at the Haile deposit, South Carolina, contain many remnants of early pyrite: (1) fine-grained cubic pyrite disseminated along bedding; (2) fine- grained spongy, rounded masses of pyrite that may envelop or drape over pyrite cubes; (3) fragments of botryoidally and crustiform layered pyrite, and (4) pyritic infilling of vesicles and pumice. Detailed mineral chemistry by petrography, microprobe, SEM, and EDS analysis of replaced pumice and colloform structures containing both arsenic compositional banding and electrum points to coeval deposition of gold and the volcanic host rocks and, thus, confirms a syngenetic origin for the gold deposits. Early pyrite textures are present in other major deposits of the Carolina slate belt, such as Ridgeway and Barite Hill, and these provide strong evidence for models whereby the sulfide ores formed prior to tectonism. The role of Paleozoic metamorphism was to remobilize and concentrate gold and other minerals in structurally prepared sites. Recognizing the significance of paragenetically early pyrite and gold textures can play an important role in distinguishing sulfide ores that form in volcanic and sedimentary environments from those formed solely by metamorphic processes. Exploration strategies applied to the Carolina slate belt and correlative rocks in the eastern United States in the Avalonian basement will benefit from using syngenetic models for gold mineralization.

Economic Geology↗

USGS2001

Miocene and early Pliocene epithermal gold-silver deposits in the northern Great Basin, western United States: Characteristics, distribution, and relationship to Magmatism

Numerous important Miocene and early Pliocene epithermal Au-Ag deposits are present in the northern Great Basin. Most deposits are spatially and temporally related to two magmatic assemblages: bimodal basalt-rhyolite and western andesite. These magmatic assemblages are petrogenetic suites that reflect variations in tectonic environment of magma generation. The bimodal assemblage is a K-rich tholeiitic series formed during continental rifting. Rocks in the bimodal assemblage consist mostly of basalt to andesite and rhyolite compositions that generally contain anhydrous and reduced mineral assemblages (e.g., quartz + fayalite rhyolites). Eruptive forms include mafic lava flows, dikes, cinder and/or spatter cones, shield volcanoes, silicic flows, domes, and ash-flow calderas. Fe-Ti oxide barometry indicates oxygen fugacities between the magnetite-wustite and fayalite-magnetite-quartz oxygen buffers for this magmatic assemblage. The western andesite assemblage is a high K calc-alkaline series that formed a continental-margin are related to subduction of oceanic crust beneath the western coast of North America. In the northern Great Basin, most of the western andesite assemblage was erupted in the Walker Lane belt, a zone of transtension and strike-slip faulting. The western andesite assemblage consists of stratovolcanoes, dome fields, and subvolcanic plutons, mostly of andesite and dacite composition. Biotite and hornblende phenocrysts are abundant in these rocks. Oxygen fugacities of the western andesite assemblage magmas were between the nickel-nickel oxide and hematite-magnetite buffers, about two to four orders of magnitude greater than magmas of the bimodal assemblage. Numerous low-sulfidation Au-Ag deposits in the bimodal assemblage include deposits in the Midas (Ken Snyder), Sleeper, DeLamar, Mule Canyon, Buckhorn, National, Hog Ranch, Ivanhoe, and Jarbidge districts; high-sulfidation gold and porphyry copper-gold deposits are absent. Both high- and low-sulfidation gold-silver and porphyry copper-gold deposits are affiliated with the western andesite assemblage and include the Comstock Lode, Tonopah, Goldfield, Aurora, Bodie, Paradise Peak, and Rawhide deposits. Low-sulfidation Au-Ag deposits in the bimodal assemblage formed under relatively low oxygen and sulfur fugacities and have generally low total base metal (Cu + Pb + Zn) contents, low Ag/Au ratios, and notably high selenide mineral contents compared to temporally equivalent low-sulfidation deposits in the western andesite assemblage. Petrologic studies suggest that these differences may reflect variations in the magmatic-tectonic settings of the associated magmatic assemblages-deposits in the western andesite assemblage formed from oxidized, water-rich, subduction-related calc-alkaline magmas, whereas deposits in the bimodal assemblage were associated with reduced, water-poor tholeiitic magmas derived from the lithospheric mantle during continental extension. The contrasting types and characteristics of epithermal deposits and their affinities with associated igneous rocks suggest that a genetic relationship is present between these Au-Ag deposits and their temporally associated magmatism, although available data do not prove this relationship for most low-sulfidation deposits.

Economic Geology↗

USGS2011

Structural controls and evolution of gold-, silver-, and REE-bearing copper-cobalt ore deposits, Blackbird district, east-central Idaho: Epigenetic origins

The Cu-Co ± Au (± Ag ± Ni ± REE) ore deposits of the Blackbird district, east-central Idaho, have previously been classified as Besshi-type VMS, sedex, and IOCG deposits within an intact stratigraphic section. New studies indicate that, across the district, mineralization was introduced into the country rocks as a series of structurally controlled vein and alteration systems. Quartz-rich and biotite-rich veins (and alteration zones) and minor albite and siderite veinlets maintain consistent order and sulfide mineral associations across the district. Both early and late quartz veins contain chalcopyrite and pyrite, whereas intermediate-stage tourmaline-biotite veins host the cobaltite. Barren early and late albite and late carbonate (generally siderite) form veins or are included in the quartz veins. REE minerals, principally monazite, allanite, and xenotime, are associated with both tourmaline-biotite and late quartz veins. The veins are in mineralized intervals along axial planar cleavage, intrafolial foliation, and shears. Mineralized intervals are hosted by a variety of metasedimentary rocks, including three phyllitic units of Mesoproterozoic age and two schistose units. All of these units are S-tectonites in the footwall of a regional thrust fault. Specifically, the district lies within an oblique thrust ramp containing a series of structural horses (three domains) in a duplex system. The deposits span the three domains and are hosted by metamorphic rocks that range from lower amphibolite facies in the structurally upper domain to lower-middle greenschist facies in the lower domain (an inverted metamorphic sequence). Early quartz and biotite veins were introduced during progressive folding and prolonged peak metamorphic conditions and they underwent late-tectonic retrograde recrystallization and metamorphic mineral growth, to the same extent as the country rocks in each domain. Where little subsequent deformation occurred, early veins are discordant to bedding but, where folding was polyphase and fabrics are penetrative, mineralized zones are concordant with metamorphic compositional layering. Late quartz veins in the zones are associated with retrograde minerals and textures and are only locally deformed. 40 Ar/ 39 Ar dating of unoriented muscovite from the selvage of a late quartz vein yields a Late Cretaceous age of about 83 Ma, the time of retrograde metamorphism associated with introduction of late quartz veins. Textural data at all scales indicate that the host sites for veins and the tectonic evolution of both host rocks and mineral deposits were kinematically linked to Late Cretaceous regional thrust faulting. Heat, fluids, and conduits for generation and circulation of fluids were part of the regional crustal thickening. The faulting also juxtaposed metaevaporite layers in the Mesoproterozoic Yellowjacket Formation over Blackbird district host rocks. We conclude that this facilitated chemical exchange between juxtaposed units resulting in leaching of critical elements (Cl, K, B, Na) from metaevaporites to produce brines, scavenging of metals (Co, Cu, etc) from rocks in the region, and, finally, concentrating metals in the lower-plate ramp structures. Although the ultimate source of the metals remains undetermined, the present Cu-Co ± Au (± Ag ± Ni ± REE) Blackbird ore deposits formed during Late Cretaceous compressional deformation .

Idaho↗

USGS1934

Structural history of the fracture systems at Grass Valley, California

In the foregoing outline of the structural history of the Grass Valley intrusive the vein fractures are regarded as elements of the internal tectonics of the intrusive body itself. They originated in an early stage of the structural development of the region, and are equivalent to the marginal thrusts observed in the Yose-mite and along the Mother Lode system . As such, the vein fractures are of local origin, since they are entirely restricted to the neighborhood of intrusive contacts. As the area of consolidation within the Sierra Nevada batholith increased, larger units were affected by tectonic stresses, and joints were formed which belong to a system of regional extent. As this system has been observed over an area of at least 7500 square miles, its regional character seems proven. Basic dikes and aplites follow the crossing system , and thus indicate that the earliest crossings were formed when magma to fill them was still available. Both fissure systems repeatedly served for adjustment of later stresses, as can be proved by relative mutual displacements and by the repeated fracturing and renewed deposition of quartz within the vein fissures. It is probable that these later stresses were regional in character.

California↗

USGS1961

Sandstone-type uranium deposits at Ambrosia Lake, New Mexico-An interim report

The Ambrosia Lake district in northwestern New Mexico is the most important uranium mining and milling district in the United States. Together with the nearby Laguna district it contains more than 50 percent of the nation's reserves.Most of the ore occurs in the Morrison formation of Late Jurassic age as elongate, tabular, mantolike bodies principally in the upper half of the Westwater Canyon sandstone member and near the base of the Poison Canyon sandstone tongue (9). Individual deposits are distributed along two easterly trending belts 2 to 3 miles apart. The ore bodies are as much as 3,000 feet long, several hundred feet wide, and 100 feet thick. Depths to the ore range from 0 to 2,200 feet. Some ore is also mined from the Todilto limestone of Late Jurassic age and from the Dakota sandstone of Early (?) and Late Cretaceous age.Two types of unoxidized ore are recognized: prefault ore, which is considered to be primary, and postfault ore, which may be redistributed. The prefault ore shows no obvious relationship to tectonic structures but appears to be controlled by a variety of sedimentary structures. Postfault ore is controlled by a combination of sedimentary and tectonic structures. Disseminated carbonaceous matter, believed to be plant derived, appears to be the dominant control in the localization of the uranium .The ore mineralogy is comparatively simple, and coffinite is by far the most abundant ore mineral. Molybdenum, selenium, vanadium, and iron occur in anomalous quantities in the deposits in both oxidized and unoxidized minerals.U/eU ratios and radioisotope distribution indicate almost universal disequilibrium and fairly recent migration of radioisotopes in all deposits that have been sampled.Further studies on the organic carbonaceous matter, sandstone alteration, age determinations, and sulfur isotope composition are required to obtain a better understanding of the source, transportation, and deposition of uranium and other elements in the deposits .

New Mexico↗