USGS Science⌕ Search

SEARCH · USGS Science

Results for “Ore and Energy Resource Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,664 records · Page 88Linked to original sources
USGS2024

Limited preservation of strike-slip surface displacement in the geomorphic record

Offset geomorphic markers are commonly used to interpret slip history of strike-slip faults and have played an important role in forming earthquake recurrence models. These data sets are typically analyzed using cumulative probability methods to interpret average amounts of slip in past earthquakes. However, interpretation of the geomorphic record to infer surface slip history is complicated by slip variability, measurement uncertainty, and modification of offset features in the landscape. To investigate how well geomorphic data record surface slip, we use offset measurements from recent strike-slip surface ruptures ( n = 39), faults with geomorphic evidence of multiple strike-slip earthquakes ( n = 29), and synthetic slip distributions with added noise ( n > 10,000) to examine the constraints of the geomorphic record and the underlying assumptions of the cumulative offset probability distribution analysis method. We find that the geomorphic record is unlikely to resolve more than two paleo-slip distributions, except in specific cases with low slip variability, high slip-per-event, and semiarid climate. In cases where site-specific conditions allow for interpretation of more than two earthquakes, lateral extrapolation along a fault is not straightforward because on-fault displacement and distributed deformation may be spatially variable in each earthquake. We also find that average slip in modern earthquakes is adequately recovered by probability methods, but the reported prevalence of strike-slip faults with characteristic slip history is not supported by geomorphic data. We also propose updated methods to interpret slip history and construct uncertainty bounds for paleo-slip distributions.

Journal of Geophysical Research: Solid Earth↗
USGS2026

Rapid characterization of the 2025 Mw 8.8 Kamchatka, Russia earthquake

The 29 July 2025 M w 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near‐source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real‐time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite‐fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The M w 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.

Kuril-Kamchatka subduction zone↗
USGS2025

Fiber-imaged supershear dynamics in the 2024 Mw 7 Mendocino Fault earthquake

Fault structure and rupture physics are deeply intertwined, and observations of this coupling are critical for understanding earthquake behavior. Rupture propagation is observable at fine scales using dense seismic networks. Fiber-optic sensing allows for long-term deployments of ultradense arrays that enable high-resolution measurements of infrequent, large earthquakes. We recorded the 2024 moment magnitude ( M w ) 7 Mendocino Fault earthquake with a nearby fiber-optic array and imaged its behavior with seismic beamforming. The rupture propagated to the east at subshear velocity; stagnated near the Mendocino Triple Junction, a zone of structural complexity; and subsequently transitioned to supershear velocity. The correlation between source physics and structure shows how lithospheric heterogeneity affects first-order characteristics of earthquake ruptures. Our results also demonstrate the potential for fiber-optic sensing to improve real-time estimation of key parameters for early warning.

California↗
USGS2024

Constraining mean landslide occurrence rates for non-temporal landslide inventories using high-resolution elevation data

Constraining landslide occurrence rates can help to generate landslide hazard models that predict the spatial and temporal occurrence of landslides. However, most landslide inventories do not include any temporal data due to the difficulties of dating landslide deposits. Here we introduce a method for estimating the mean landslide occurrence rate of deep-seated rotational and translational slides derived solely from high-resolution (≤3 m) elevation data and globally available estimates of the diffusion coefficient for sediment flux. The method applies a linear diffusion model to the roughest landslide deposits until they reach a representative non-landslide roughness distribution. This estimates the time for a landslide deposit to be unrecognizable in high-resolution digital elevation data, which we term the mean lifetime of the landslide. Using the mean lifetime and number of landslides within an area of interest, we can estimate the mean occurrence rate of landslides over that domain. We validate this approach using a comprehensive temporal inventory of landslides in western Oregon created using age-roughness curves that are calibrated with high-resolution elevation data and radiocarbon data. We find good agreement between our diffusion method and the existing age-roughness-derived estimates, producing mean lifetimes of 4500 and 5200 years (4% difference), respectively. Hazard maps produced using the two methodologies generally agree, with the maximum differences in landslide probability reaching 0.1. Due to the relative abundance of high-resolution elevation data compared with age-dated landslides, our method could help constrain landslide occurrence rates in areas previously considered unfeasible.

Oregon↗
USGS2025

Fault displacement model for surface principal rupture of strike-slip faults

The probability distribution model for principal displacement accommodated on the surface main trace is a critical input to the fault displacement hazard analysis. This article presents a new model for strike-slip ruptures in the moment magnitude ( M ) range of 6 to 8.3. The new model is the outcome of a multi-year research effort to update the widely used model developed by Petersen and others in 2011. Updates include the adoption of the Fault Displacement Hazard Initiative database and enhancements to rupture and displacement data preparation. Statistical formulation and estimation have also been updated substantially. A three-parameter modified normal distribution that we refer to as the negative Exponentially Modified Gaussian distribution is adopted to model the probability distribution of the natural logarithm of principal displacement. Formulation for the mean parameter of the modified normal includes a random earthquake term, a nonlinear scaling relation with M , and an ellipse function for along-main-trace variation. The aleatory variability of the updated model now depends on M as well as site’s along-main-trace position. These updates not only significantly improve the fit to the distribution of the observed displacements but also yield reasonable 95th percentile predictions for M > 7.5 events. Alternative models representing the estimation uncertainty of the M -scaling relation are also developed. These new models are compared to the previous model in terms of percentile predictions and the calculated hazard curves. The steeper hazard curves from the new models yield a lower exceedance rate than the normal-distribution based model developed previously by Petersen and others.

Earthquake Spectra↗
USGS2024

Analysis of factors affecting plume remediation in a sole-source aquifer system, southeastern Nassau County, New York

Several plumes of dissolved, chlorinated solvents, including trichloroethylene, have been identified in a sole-source aquifer near the former Northrop Grumman Bethpage Facility and Naval Weapons Industrial Reserve Plant sites in southeastern Nassau County, New York. Past investigations have documented that the groundwater contamination originated from this industrial area and now extends to the south, in the direction of groundwater flow. The intermixed plumes are commonly referred to as the “Navy Grumman groundwater plume.” Detailed groundwater-flow modeling was needed for the New York State Department of Environmental Conservation (NYSDEC) to evaluate design options necessary for the construction, operation, optimization, maintenance, and monitoring of a groundwater extraction and treatment cleanup plan selected in a December 2019 Amended Record of Decision by the NYSDEC to comprehensively address these plumes. Consequently, the NYSDEC began a cooperative study with the U.S. Geological Survey in 2020 to better understand the local hydrogeologic framework using two independent approaches to characterize aquifer heterogeneity and update an existing regional groundwater-flow model to provide transient boundary conditions for new inset groundwater-flow models of the plume area. We developed these detailed inset models for the two independent aquifer characterizations using history-matching techniques coupled with a novel approach to risk-based management optimization of the remedial design. We also used the updated regional model to assess this optimized groundwater extraction and treatment design for potential saltwater intrusion. The ensembles of parameters resulting from history matching provided a platform with which to evaluate capture by water-supply and remedial wells using particle-tracking techniques. Using the ensemble to select a risk stance, we performed multiobjective optimization to identify various configurations of remedial pumping that are consistent with external constraints and that favor potentially competing objectives. Multiple solutions provide tradeoffs that NYSDEC can consider. In general, pumping redistribution may help to prevent further contamination migration downgradient. These and other study results are intended to support decisions for the remedial design focused on the local area encompassing the full extent of the Navy Grumman groundwater plume.

New York↗
USGS2024

Updating the crustal fault model for the 2023 National Seismic Hazard Model for Alaska

We present the crustal fault model for Alaska, based on geologic observations, as a primary input for the 2023 revision of the U.S. Geological Survey National Seismic Hazard Model. We update the 2013 Alaska Quaternary fault and fold database to produce a simplified model of 105 fault sections and four fault zone polygons with basic geologic parameters including slip sense and rate. Significant updates include the following: (1) a slip rate of ∼53 mm/year on the Queen Charlotte Fault indicating it accommodates all of the plate boundary motion; (2) quantified slip rates on megathrust splay faults in the southern Prince William Sound region and near Kodiak Island; (3) improved details of structures in the Chugach-St. Elias orogen; (4) revision of the Castle Mountain Fault from right-lateral slip to a predominantly reverse fault; (5) improved Interior Alaska tectonic models that clarify relationships between the Denali, Totschunda, and thrust faults on both sides of the Alaska Range; (6) identified large earthquake sources in the eastern Brooks Range; and (7) omission of the Chatham Strait section of the Denali Fault. The fault model underscores that the collision of the Yakutat microplate is the dominant driver of active crustal faulting in most of Alaska.

Alaska, Yukon↗
USGS2025

Rupture process of the Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake

The Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake ruptured a km long portion of the east-west trending Mendocino fault zone (MFZ). In order to clarify the rupture process, we assemble three-component seismograms from regional seismic stations, horizontal coseismic displacement vectors derived from Global Navigation Satellite System (GNSS) time series, and a Sentinel-1 ascending interferogram. These data are interpreted with a model of slip distributed on two vertical fault planes representative of the eastern MFZ and spanning the ~70 km length of the aftershock zone. Assuming right-lateral strike slip, we find that the rupture initiates in the oceanic mantle at 20-30 km depth and proceeds unilaterally updip and toward the east. Early aftershocks locate adjacent to the peak slip areas, tracking the coseismic rupture propagation from oceanic mantle to shallower depth and implying a significant role of static stress transfer in driving aftershocks in an ocean plate environment.

California↗
USGS2024

Peri-Gondwanan sediment in the Arkoma Basin derived from the north: The detrital zircon record of a uniquely concentrated non-Laurentian source signal in the late Paleozoic

During the assembly of Pangea, peri-Gondwanan terranes collided with the eastern and southern margins of Laurentia and brought with them unique detrital zircon U-Pb signatures. Discriminating between individual peri-Gondwanan terranes in the detrital record is difficult due to their similar geologic histories. However, characterization of this provenance is critical for understanding late Paleozoic sediment routing during development of Pangea. Along southeastern Laurentia, in the Arkoma Basin (present-day Arkansas and eastern Oklahoma, southeastern United States), we identified Middle Pennsylvanian (Desmoinesian) strata that exhibit a concentrated peri-Gondwanan detrital zircon signature (e.g., ca. 800–550 Ma). Although several southern peri-Gondwanan terranes (e.g., Maya, Suwannee) are closer to the Arkoma Basin, geologic data, such as predominantly north-to-south paleocurrents and proximal-to-distal facies relationships in these Desmoinesian strata, support a northern source (e.g., Ganderia, Avalonia, Meguma). Further evidence of a northern source comes from detrital zircon source mapping, which reveals the persistence of this peri-Gondwanan signal in depocenters to the north of the basin after the signal had diminished in the Arkoma Basin. To this end, bottom-up detrital zircon source modeling, source mapping, regional stratigraphy, paleocurrent data, and sandstone petrography allow us to reconstruct the evolution of this Middle Pennsylvanian (Desmoinesian) sediment pathway in the context of intraplate and plate-margin tectonic activity. This reconstruction documents processes affecting Earth’s surface (e.g., tectonics, climate) during the assembly of Pangea and describes in detail part of a dynamic continental-scale drainage system.

Geosphere↗
USGS2025

Persistent deep long-period seismicity near the Lassen Volcanic Center

Deep long-period (DLP) earthquakes have been observed at many volcanic settings around the world and linked to the magmatic processes that drive volcanic unrest. At the Lassen Volcanic Center (LVC) of the Cascade arc, limited detection of DLP activity hinders classification of anomalous seismic behavior and its relationship to the LVC magmatic system. This study uses a template matching approach with seismic data from temporary nodal and permanent stations to detect and locate DLP earthquakes near the LVC between 2017 and 2024. Within the DLP catalog of 611 events, a transition occurs from scattered (2017–2020) to oscillatory (2021–2024) occurrence rates. During the oscillatory period, regional earthquakes with large amplitude velocity waveforms observed near the LVC are associated with abrupt changes in DLP occurrence rates. Continued monitoring of DLP activity has the potential to better define the processes that drive volcanic unrest at the LVC in the future.

California↗
USGS2025

Mapping bedrock outcrops in the Sierra Nevada Mountains (California, USA) using machine learning

Accurate, high-resolution maps of bedrock outcrops can be valuable for applications such as models of land–atmosphere interactions, mineral assessments, ecosystem mapping, and hazard mapping. The increasing availability of high-resolution imagery can be coupled with machine learning techniques to improve regional bedrock outcrop maps. In the United States, the existing 30 m U.S. Geological Survey (USGS) National Land Cover Database (NLCD) tends to misestimate extents of barren land, which includes bedrock outcrops. This impacts many calculations beyond bedrock mapping, including soil carbon storage, hydrologic modeling, and erosion susceptibility. Here, we tested if a machine learning (ML) model could more accurately map exposed bedrock than NLCD across the entire Sierra Nevada Mountains (California, USA). The ML model was trained to identify pixels that are likely bedrock from 0.6 m imagery from the National Agriculture Imagery Program (NAIP). First, we labeled exposed bedrock at twenty sites covering more than 83 km 2 (0.13%) of the Sierra Nevada region. These labels were then used to train and test the model, which gave 83% precision and 78% recall, with a 90% overall accuracy of correctly predicting bedrock. We used the trained model to map bedrock outcrops across the entire Sierra Nevada region and compared the ML map with the NLCD map. At the twenty labeled sites, we found the NLCD barren land class, even though it includes more than just bedrock outcrops, accounted for only 41% and 40% of mapped bedrock from our labels and ML predictions, respectively. This substantial difference illustrates that ML bedrock models can have a role in improving land-cover maps, like NLCD, for a range of science applications.

California↗
USGS2026

Miocene evolution of the Humboldt Current

Diatom records from the East Pisco Basin (EPB) of southern Peru and offshore Ocean Drilling Program (ODP) Hole 682 A reveal stepwise increases in the primary productivity of the Humboldt Current during the middle and late Miocene. Although diatoms are present back through the late middle Eocene, successively enhanced diatom production occurs during the Miocene in four steps. The first step between 14.2 and 13.8 Ma marks the onset of diatom deposition in the Pisco-0 sequence. A second step at ∼12.9 Ma coincides with a major drop in global sea level during which diatom deposition ceased in the EPB but continued in ODP 682 A as well as in Chile, Ecuador, and Colombia. Beginning at 10.4 to 10.0 Ma, a major increase in diatom sedimentation rates in both the EPB and in ODP 682 A signals an abrupt intensification of the Humboldt Current productivity, which may be related to the closure of the Central American Seaway to deeper water circulation. A fourth step coincides with the transgressive deposition of the diatom-rich Pisco-2 sequence at 8.4 Ma and is enhanced by the onset of the global Late Miocene Biogenic Bloom (8.0–4.5 Ma). Between 7 and 6 Ma, common subtropical diatoms in ODP 682 A contrast with high diatom deposition rates in the EPB, suggesting variable El Niño-La Niña conditions. During this time, fossil vegetation evidence from southern Peru supports the presence of seasonal periods of enhanced rainfall typical of El Niño conditions. The Miocene trend of increasing sea mammal diversity in the EPB parallels these steps, further supporting stepwise enhancement of primary productivity in the Humboldt Current during the Miocene.

Humboldt Current↗
USGS2024

Declining groundwater storage expected to amplify mountain streamflow reductions in a warmer world

Groundwater interactions with mountain streams are often simplified in model projections, potentially leading to inaccurate estimates of streamflow response to climate change. Here, using a high-resolution, integrated hydrological model extending 400 m into the subsurface, we find groundwater an important and stable source of historical streamflow in a mountainous watershed of the Colorado River. In a warmer climate, increased forest water use is predicted to reduce groundwater recharge resulting in groundwater storage loss. Losses are expected to be most severe during dry years and cannot recover to historical levels even during simulated wet periods. Groundwater depletion substantially reduces annual streamflow with intermittent conditions predicted when precipitation is low. Expanding results across the region suggests groundwater declines will be highest in the Colorado Headwater and Gunnison basins. Our research highlights the tight coupling of vegetation and groundwater dynamics and that excluding explicit groundwater response to warming may underestimate future reductions in mountain streamflow.

Nature Water↗
USGS2024

Automated, near real-time ground-motion processing at the U.S. Geological Survey

We describe automated ground‐motion processing software named gmprocess that has been developed at the U.S. Geological Survey (USGS) in support of near‐real‐time earthquake hazard products. Because of the open‐source development process, this software has benefitted from the involvement and contributions of a broad community and has been used for a wider range of applications than was initially envisioned. Here, we give an overview and introduction to the software, including how it has leveraged other open‐source libraries. We highlight some key features that gmprocess provides, compare response spectra calculated with the automated processing approach of gmprocess to the response spectra provided by the Next Generation Attenuation projects, and summarize projects that have utilized gmprocess. These use‐cases demonstrate that this software development effort has been successfully leveraged in earthquake research activities both within and outside the USGS.

Seismological Research Letters↗
USGS2025

The effects of line simplification on planform geometry

Data on maps should retain accuracy regardless of scale. Yet, as cartographic lines are generalized, there can be impacts on properties such as topology, density, and planform geometry. Here, we investigate the use of the Scale Specific Sinuosity (S3) metric (Stanislawski et al., 2023) to evaluate the effects of line simplification on planform geometry, which is the bends of streams in map view. We employ an open-source Python S3 workflow to characterize the geometry of five diverse stream channels in the United States. The original data are extracted from the U.S. Geological Survey National Hydrography Dataset 1:24,000-scale vector data (U.S. Geological Survey, 2000) (Table 1), and the simplification is done using the Visvalingam and Whyatt method (2017) with a simplification tolerance of 0.5, 1.0, 1.5, and 2.0 km. The S3 analysis is calculated at each level of simplification and S3 derivatives are generated. Derivatives include measures of sinuosity, fractal dimension, and the dominant bend wavelength. The findings show that the change in planform geometry is scale-dependent, though simplification will have little effect on straighter lines. The change becomes more apparent in complex lines as the degree of simplification aligns with the scale of the dominant bend geometries. These logical conclusions are evidence that the S3 is a useful metric for automated characterization of bend geometry regardless of line complexity.

Conference Paper↗
USGS2026

Synthesizing a twelve-year sediment trap time series of planktic foraminiferal flux in the Gulf of America (Mexico)

Sediment trap time series provide powerful frameworks for testing hypotheses about planktic foraminiferal assemblage composition, seasonality, and geochemical responses to environmental variability, all of which are central to improving paleoceanographic reconstructions. We present high resolution foraminiferal assemblage data from a long-running sediment trap (2008–2020) in the northern Gulf of America (Mexico). This study summarizes the species composition, seasonality, and size distribution of the fifteen most abundant species of planktic foraminifera, which account for 98% of total flux. Foraminiferal flux peaks in winter and reaches a minimum in summer, following the seasonal pattern of primary production in the northern Gulf. Winter assemblages are dominated by non-spinose taxa, whereas spinose taxa prevail during summer. Across nearly all species, average monthly test size covaries with temperature, independent of seasonal flux trends. Notably, Trilobatus sacculifer and Neogloboquadrina dutertrei show a significant decline in relative abundance and flux during 2017–2020, nearly disappearing from the assemblage.

Journal of Foraminiferal Research↗
USGS2026

Tracking baseflow supply dynamics using SWOT data from small groundwater-dominated lakes

In situ surface-water monitoring strategies are biased towards larger perennial streams and lakes and are generally not designed to track mechanisms of baseflow supply contributed by the dynamic storage of aquifers. Additionally, small (< 1 km 2 ) groundwater-influenced lakes and wetlands globally have little in situ monitoring infrastructure. We explored the utility of remotely sensed Surface Water Ocean Topography Satellite (SWOT) data, collected from 2023 onward, to characterise the seasonal and multi-year water-level trends of groundwater flow-through kettle lakes distributed across the permeable sediments of eastern Massachusetts, USA. This analysis indicated that water levels for kettle lakes with areas down to approximately 0.05 km 2 are resolvable in the study area. Our examination of 17 kettle lakes found that SWOT water-surface elevation data closely tracked groundwater levels in adjacent monitoring wells where available, including the timing of seasonal patterns (highest levels generally in late spring), although there was some variation between years and there was a substantial lag in the timing of high water levels for a lake located downgradient from a 30-m-thick vadose zone. Furthermore, SWOT-observed water-level increases in kettle lakes tracked with baseflow increases in two adjacent groundwater-dominated streams, as would be expected from increased hydraulic gradients. Unlike spectral remote sensing, SWOT data are generally not affected by cloud cover, resulting in a potential for groundwater-dominated lakes to be sentinels of dynamic storage patterns, including identification of baseflow drought lags, which are currently ill-defined hydrological processes. SWOT monitoring of groundwater-influenced surface waters shows potential for augmenting existing monitoring wells and streamgages as continuous monitors of groundwater levels and baseflow supply in permeable terrain.

Massachusetts↗
USGS2025

Accurate simulation of flow through dipping aquifers with MODFLOW 6 using enhanced cell connectivity

In simulations of groundwater flow through dipping aquifers, layers of model cells are often “deformed” to follow the top and bottom elevations of the aquifers. When this approach is used in MODFLOW, adjacent cells within the same model layer are vertically offset from one another, and the standard conductance-based (two-point) formulation for flow between cells does not rigorously account for these offsets. The XT3D multi-point flow formulation in MODFLOW 6 is designed to account for geometric irregularities in the grid, including vertical offsets, and to provide accurate results for both isotropic and anisotropic groundwater flow. A recent study evaluated the performance of the standard formulation and XT3D using a simple, synthetic benchmark model of a steeply dipping aquifer. Although XT3D generally improved the accuracy of flow simulations relative to the standard formulation as expected, neither formulation produced accurate flows in cases that involved large vertical offsets. In this paper, we explain that the inability of XT3D to produce accurate flows in the steeply dipping aquifer benchmark was not due to an inherent limitation of the flow formulation, but rather to the limited cell connectivity inherent in the most commonly used discretization packages in MODFLOW 6. Furthermore, we demonstrate that XT3D is able to produce the expected accuracy when adequate cell connectivity is introduced using MODFLOW's unstructured grid type and the aquifer is discretized vertically using at least two model layers.

Groundwater↗