USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Science: Processes and Impacts”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 88Linked to original sources
USGS2025

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana↗
USGS2026

Key minerals in energy transmission

The electrical grid relies on minerals with unique properties to transform, transmit, and convert electricity. Transmission needs are growing—to support the expansion of data centers and link diverse energy resources into the grid. This expansion will require greater quantities of minerals. Although some minerals are produced in the United States, the United States relies on imports for others. This infographic shows the key minerals that support energy transmission, and how reliant the United States is on imports for these minerals.

General Information Product↗
USGS2024

SCEC/USGS Community Stress Drop Validation Study: How spectral fitting approaches influence measured source parameters

Spectral source parameters used to estimate an earthquake’s stress drop (Δσ) can vary significantly across measurement approaches. The Statewide California Earthquake Center/U.S. Geological Survey Community Stress-Drop Validation Study was initiated to compare source parameter estimates, focusing initially on a dataset from the 2019 Ridgecrest earthquake sequence. As part of that validation effort, here we focus on one potential source of uncertainty: whether spectral fitting approaches alone, applied to a common set of spectra from the 2019 Ridgecrest sequence result in different source parameter estimates. By using a common set of benchmark spectra analyzed across a consistent frequency band of 1–40 Hz, we eliminate many sources of variability. A subgroup of validation study participants volunteered to estimate the low-frequency displacement (Ω0) and corner frequency ( f c ) by fitting a smooth function to benchmark displacement spectra. Participants used linear- or log-sampled spectra, assumed a Brune or Boatwright spectral model, and applied different misfit criteria. We compare 17 approaches used to estimate Ω0, f c , and Δσ for 54 earthquake spectra. Our results reveal that 35% of events have Δσ estimates within a factor of two, whereas others exhibit variations exceeding an order of magnitude. The variability in Ω0 and f c can largely be attributed to whether a spectrum is consistent with the smooth function of an idealized simple crack model. The trade-off between Ω0 and f c may be more pronounced when using linearly sampled spectra, as higher frequency spectral bumps control the fits. As expected, methods that assumed a Boatwright model tended to have lower Ω0 and somewhat higher f c compared to those assuming a Brune model, although resulting Δσ estimates are similar. When compared to the overall validation study results, the fitting approach alone may account for between 5% and 90% (25% on average) of the total variability in spectral Δσ.

California↗
USGS2026

Distributed faulting of the northern West Napa Fault Zone in Napa Valley, California

Mapped surface ruptures from the 24 August 2014 M w 6.0 South Napa earthquake in the Napa Valley, California, show a 2‐km‐wide zone of distributed faulting in the southern and central West Napa fault zone (WNFZ). In the northern WNFZ at Hendry Winery (HW), however, the mapped 2014 surface ruptures encompass an ∼100‐m‐wide zone, implying significant narrowing of the near‐surface fault zone to the north. We present a tomographic shear‐wave velocity ( ⁠⁠ V S ) model and guided‐wave data that indicate the northern WNFZ is at least 400‐m wide, with multiple near‐surface fault traces. Our V S model shows that the 2014 surface ruptures are underlain by discrete low‐velocity zones (LVZs), and coincident guided‐wave data show that the LVZs carry fault‐zone guided waves. If nearby (<500 m) mapped faults to the east of HW are part of the WNFZ, the entire WNFZ is more than 1 km wide in the northern Napa Valley. WNFZ guided waves travel up to 38% slower than S body waves, and low‐strain guided‐wave shaking is up to five times stronger than the associated body‐wave shaking. Our data suggest that guided waves, traveling along distributed faults, may result in an increased shaking hazard over a 1‐km‐wide area of the northern Napa Valley during future significant earthquakes. In places, the 2014 surface ruptures were difficult to find one year after the earthquake, and paleoseismic trenching showed only weak evidence for faulting, which may not have been identified in trenches if the locations of the 2014 surface ruptures had not been previously mapped ( Prentice et al. , 2015 ). Guided‐wave and V S tomography data, however, show strong evidence for faulting beneath the 2014 surface ruptures and at locations to the east. Although paleoseismic trenching is the gold standard for identifying near‐surface faulting, methods such as peak ground velocities of guided waves may better identify immature near‐surface fault traces.

California↗
USGS1976

Diamond drilling at the Ma'milah Mine, Kingdom of Saudi Arabia

The Ma'millah gold mine is about 90 km southeast of At Ta'if at lat 21°03'N., long 41°18'E., in southwestern Saudi Arabia. The deposit, which was worked extensively by ancient miners, consists of several veins and massive lenses of quartz along a regional fault. The extensive ancient mine workings, large size of some quartz outcrops, and significant gold content of several samples indicated that subsurface exploration was warranted. Accordingly, two holes were drilled into the deposit during the interval December 1972 to February 1973. The drill findings were disappointing; the grade of vein material was found to be too low to be of economic interest and the quartz bodies were found to pinch out both along strike and downdip. The drilling program therefore was terminated. The deposit is not worth further exploration

Ma'milah Mine↗
USGS2024

The importance of nodal plane orientation diversity for earthquake focal mechanism stress inversions

Inversions of earthquake focal mechanisms are among the most accessible and reliable methods for determining crustal stress. However, the use of this method varies widely, and assumptions that underpin it are often violated, potentially compromising stress estimates. We investigate the consequences of violating the little-studied assumption that the focal mechanisms have diverse orientations. Our approach is to employ data-informed synthetic mechanisms, with nodal plane orientations defined by recent earthquake lineaments in the Midland Basin, western Texas, and rakes consistent with slip in the mapped stress field. Using both the traditional stress inversion method that assumes constant shear stress magnitudes on the causative faults as well as a recently published variable shear stress method, we show that low fault plane diversity can cause maximum horizontal stress ( S Hmax ) orientation and relative principal stress magnitude (faulting regime) estimates to differ markedly from the true values. This problem is compounded for catalogs with even modest amounts of noise (≤15°) or few (e.g., 20) mechanisms. Significantly, traditional approaches for quantifying uncertainty such as the bootstrap can severely underestimate the true uncertainty under these circumstances. To remedy this, we provide simple tools to quantify nodal plane orientation diversity and stress inversion reliability.

Geological Society of London Special Publications↗
USGS2025

Submarine avalanche deposits hold clues to past earthquakes

Earthquakes and other natural events sometimes shake the seafloor near coastlines severely enough to cause underwater avalanches that rush down steep slopes, scouring the seabed and carrying sediment to greater depths. These fast-moving sediment-laden flows, called turbidity currents , have at times damaged underwater infrastructure like pipelines and communications cables, as they did, for example, in snapping transatlantic cables off the coast of Newfoundland after the 1929 Grand Banks earthquake.

EOS Transactions↗
USGS2026

Digitizer Suite: The Albuquerque Seismological Laboratory Digitizer Testing Suite

Laboratory testing of digitizers and seismometers helps ensure that prior to deployment the instrumentation can produce high quality data and is operating within specifications. In this work we detail the software package called: the Albuquerque Seismological Laboratory (ASL) Digitizer Test Suite. This Java software package provides several algorithms to verify various performance parameters of digitizers commonly used for recording analog seismic instruments. The goal of these tests is not to be exhaustive, but to identify common failures that could compromise the integrity of seismic data being recorded on the digitizer. For example, Sandia National Laboratories (e.g., Slad and Merchant, 2018) routinely do comprehensive testing of digitizers for various monitoring missions. While these tests reports are valuable for comprehensively characterizing a recording system, it would be resource intensive to conduct such tests on every seismic recorder used in a network. We focus on tests that include ways to estimate the sensitivity, timing, self-noise, and clip-level of the digitizer, as well as the fidelity of the signal being recorded. The software is publicly available and provides a way for the community to verify the integrity of a digitizer using a minimum amount of outside equipment.

Seismological Research Letters↗
USGS2025

An unexplained tsunami: Was there megathrust slip during the 2020 Mw7.6 Sand Point, Alaska, earthquake?

On October 19, 2020, the M w 7.6 Sand Point earthquake struck south of the Shumagin Islands in Alaska. Moment tensors indicate the earthquake was primarily strike-slip, yet the event produced an enigmatic tsunami that was larger and more widespread than expected for an earthquake of that magnitude and mechanism. Using a suite of hydrodynamic, seismic, and geodetic modeling techniques, we explore plausible causes of the tsunami. We find that strike-slip models consistent with the moment tensor orientation cannot produce the observed tsunami. Hydrodynamic inversion of sea surface deformation from deep ocean and tide gauge data suggest seafloor deformation more closely matches a megathrust, rather than a strike-slip, source. Static slip inversions, using sea level and Global Navigation Satellite System data, allow for a portion of co-seismic megathrust slip that can explain tsunamigenesis. Combining all available geophysical datasets to model the kinematic rupture, we show that considerable, relatively slow, megathrust slip is allowable in the Shumagin segment, concurrent with strike-slip faulting. We hypothesize that the slow megathrust rupture does not contribute much seismic radiation allowing it to previously go unnoticed with traditional seismic monitoring.

Alaska↗
USGS2026

Quantifying methane emissions from a rich fen with uncrewed aircraft systems in boreal Alaska

Thawing of permafrost in northern latitudes is accelerating, potentially releasing substantial amounts of methane (CH 4 ) as forested permafrost plateaus transition into wetlands. This ecosystem shift alters the carbon exchange between the soil and atmosphere, influencing the permafrost-carbon feedback. Monitoring these changes may require measurement platforms operating across varied spatial and temporal scales. Recent advancements in small uncrewed aircraft systems (sUAS) enable high resolution CH 4 flux quantification in remote, complex terrains; however, comparisons with established methods such as eddy covariance flux towers remain limited. We used a hexacopter sUAS to quantify CH 4 emissions from the Alaska Peatland Experiment, a wetland within the Bonanza Creek Experimental Forest. Using an ensemble of methods to define the background CH 4 concentration, along with near surface emissions from soil chambers, helped constrain our flux estimates. The sUAS method yielded an average flux of 0.0077 ± 0.0019 mol s −1 CH 4 , within a factor of two concurrent tower-derived total source flux estimates (0.0036 ± 0.00042 mol s −1 CH 4 ). To assess spatial drivers of observed fluxes, we conducted a 2D footprint analysis and overlaid the results with high-resolution hyperspectral land cover classification, quantifying vegetative contributions within each footprint. This revealed higher fen representation in sUAS measurements (73.8%) than in tower footprints (58.8%), and lower tussock meadow representation (15.6% and 30.3%, respectively). These differences were consistent with known variation in vegetation-specific CH 4 emissions. Our results highlight that combining footprint modeling with land cover characterization can enhance interpretations of CH 4 fluxes and guide cross-platform comparisons.

JGR Atmospheres↗
USGS2026

Earthquake ground-motion model adjustments for the San Francisco Bay area

We develop adjustments to ergodic ground‐motion models (GMMs) to improve their performance in the San Francisco Bay Area (SFBA). GMMs are widely used in hazard assessments to estimate characteristics of ground shaking based on known properties of the source, path, and site. Such models are often developed using datasets containing records from various regions, resulting in models that represent median ground‐motion behavior, which may not adequately represent ground motions within subregions. This is true for the SFBA, where ground motions attenuate more rapidly with distance than in many other parts of California that dominate GMM databases. To support improved seismic hazard estimates in the SFBA, we calculate regional constants and anelastic attenuation coefficient adjustments relative to two commonly used ergodic GMMs: BSSA14 ( Boore et al. , 2014 ) and ASK14 ( Abrahamson et al. , 2014 ). These adjustments are obtained for a suite of ground‐motion intensity measures (peak ground acceleration, peak ground velocity, and 5%‐damped pseudospectral acceleration at oscillator periods ranging from 0.075 to 10 s) using mixed‐effects regression. Use of the regionally adjusted models reduces the overall bias by up to 0.5 natural log units for BSSA14 and up to 0.6 natural log units for ASK14. We demonstrate one application of our attenuation adjustments and their implications in an earthquake early warning case study of the 2014 M 6.0 South Napa earthquake. The predicted extent of shaking using the adjusted models better matches observed shaking at large source‐to‐site distances, especially for lower shaking intensities, thus potentially reducing overalerting. We encourage the use of our model adjustments when ergodic models are considered for seismic hazard studies in the SFBA.

California↗
USGS2025

To heal or not to heal?: 2. The moment-recurrence time behavior of repeating earthquakes in the 2011 Prague, Oklahoma aftershock sequence is consistent with laboratory healing rates

The timing and failure conditions of an earthquake are governed by the interplay between fault reloading and restrengthening. The moment-recurrence time behavior of repeating earthquakes can give observational estimates of fault healing rates; however, it is difficult to link these observed healing rates to laboratory studies of frictional healing in part because of uncertainty in lithology. Here, we study the 2011 Prague earthquake sequence, which includes repeating earthquakes in the Arbuckle group and the granitic basement, and compare them to laboratory experiments on samples of the Arbuckle and Troy granite (representative of the basement rock) (Okamoto et al., 2025, https://doi.org/10.1029/2024JB030573 ). We find three spatially distinct groups of repeating earthquakes with different moment-recurrence behavior: (a) constant moment-recurrence time in the Arbuckle group, (b) scattered moment-recurrence time at the intersection of the foreshock-mainshock fault in the granitic basement, and (c) moment-predictable behavior outside of the foreshock-mainshock fault intersection also in the granitic basement. Our observation of stagnant healing for repeating sequences in the Arbuckle group is consistent with laboratory observations of low healing rates for moderately high pore fluid pressures in Arbuckle samples. For the moment-predictable group, the source radius that is required in order to match healing rates is consistent with source radius estimations when taking into account reasonable attenuation of the P- pulse width. Overall, we observe diverse healing behaviors in the seismic families that are consistent with laboratory healing rates, providing seismic evidence that contact-scale frictional mechanisms are relevant to large-scale earthquake dynamics.

Oklahoma↗
USGS2026

Beaver dam analogs as nature-based solutions to mitigate snowpack loss in northern New Mexico

Reductions in snow have left many streams in northern New Mexico dry or with very low flows during the summer. Base flow, defined as the contribution of groundwater to streamflow, can sustain streamflow during the summer and during drought conditions. Beaver dam analogs can be used to “slow the flow,” or increase the infiltration of rain-based runoff to replenish shallow groundwater reservoirs and increase base flow and potentially increase summertime streamflow.

New Mexico↗
USGS2025

U.S. Geological Survey Groundwater Climate Response Network, 2024

As of October 2024, the U.S. Geological Survey (USGS) operated 588 sites across the United States and its territories as part of the Groundwater Climate Response Network (CRN). The CRN is comprised of wells selected to monitor the effects of climate variability, such as droughts, on groundwater levels nationwide. The CRN includes nearly 500 locations with real-time data and more than 100 sites with non-real-time data available to the public on the CRN web mapper and the USGS National Water Dashboard.

General Information Product↗
USGS2025

Migration of seismicity from the mantle to the upper crust beneath Harrat Lunayyir volcanic field, Saudi Arabia

Harrat Lunayyir is a volcanic field in Saudi Arabia that experienced a Mw~5.4 earthquake driven by an upper-crustal dike intrusion in May 2009. This volcanic field has exhibited numerous forms of volcanic seismicity both prior to and since the 2009 dike intrusion. Significantly, earthquakes within the lithospheric mantle and, rarely, the lower crust are present in the two-decade long seismicity catalog of Harrat Lunayyir. Here we analyze 24 years of volcanic seismicity at Harrat Lunayyir from 1998 to 2022. We find that: 1) precursory seismicity began at least eight years prior to the 2009 event, with a particularly notable seismic episode one year prior; 2) lithospheric mantle seismicity is highly localized in space and in time, largely occurring in discrete sequences lasting on the order of a few hours to a few days; 3) one seismic sequence clearly migrates upward from the lithospheric mantle to the upper crust, including seismicity within the nominally ductile lower crust; 4) crustal seismicity has been slowly declining over time; and 5) lithospheric-mantle seismicity does not show any apparent decline with time. From these observations we infer that the seismicity is driven by magmatic fluids or volatiles, and seismic monitoring of this volcanic field should continue into the future.

Harrat Lunayyir volcanic field↗
USGS2024

On algorithmically determined versus traditional macroseismic intensity assignments

The utility of macroseismic data, defined as the effects of earthquakes on humans and the built environment, has been increasingly recognized following the advent of online systems that now produce unprecedented volumes of macroseismic intensity information. Contributed reports from the U.S. Geological Survey “Did You Feel It?” (DYFI) system ( Wald et al ., 1999 ) are used to generate intensity values with an algorithm based on seminal work by Dengler and Dewey (1998) . The algorithm was developed initially to reproduce intensity values assigned by expert opinion using questionnaire results collected by telephone survey. In this article, I discuss reasons why intensity values from (self‐selected) DYFI responses can differ from values that would be assigned by expert opinion given more complete data from randomly selected participants. For example, with the data used by Dengler and Dewey (1998) , intensities near 4 could be determined from the percentage of people who felt shaking in each town. With less spatially rich data from self‐selected participants, this percentage often cannot be determined reliably. Audible noises are key additional diagnostic criteria for modified Mercalli intensity (MMI) 4, but, although the DYFI system includes a question about noise, following Dengler and Dewey (1998) , the DYFI algorithm does not include a noise indicator. At the upper end of the scale, as defined the DYFI algorithm yields a maximum intensity value of 9.05, nominally corresponding to peak ground acceleration of 75% g . These and other factors can result in DYFI values that are low compared to traditional MMI values assigned using expert opinion, even absent factors that can bias traditional MMI assignments. Modern ground‐motion intensity conversion equations determined using DYFI intensities are expected to be appropriate for DYFI intensities, but the results of this study suggest that biases may be introduced if DYFI and traditional intensities are assumed to be interchangeable.

Seismological Research Letters↗
USGS2024

Development of a hydrogeologic visualization model for western Sarpy County, Nebraska

Population in western Sarpy County, Nebraska, has steadily increased over the last several decades and has led to increased groundwater use for domestic purposes. To meet the increase in demand, the Papio-Missouri River Natural Resources District is seeking to use all available sources of groundwater in western Sarpy County. Additionally, elevated groundwater nitrate plus nitrite as nitrogen concentrations were detected, indicating the need to better understand the groundwater quality of the area. Although the general geology of the area is understood, the area does not have detailed information on the extent of the various aquifers, particularly the Dakota aquifer. To characterize these aquifers, the Papio-Missouri River Natural Resources District invested in airborne electromagnetic surveys of the area to better understand the subsurface geology. Although these surveys improved understanding of the groundwater systems in the area, the Papio-Missouri River Natural Resources District wanted to integrate the subsurface information with available water-quality and groundwater-level data. In response, the U.S. Geological Survey, in cooperation with the Papio-Missouri River Natural Resources District, the Nebraska Natural Resources Commission, and the Nebraska Department of Natural Resources, assembled geologic, hydrogeologic and nitrate plus nitrite as nitrogen information for the selected area into a three-dimensional visualization computer software package called GeoScene3D. The completed GeoScene3D project was assembled to provide a visualization of the groundwater systems and associated water-quality results in Sarpy County and to provide the Papio-Missouri River Natural Resources District managers with information that can be used to make more informed groundwater resource-planning decisions in the future. This report details the development of a three-dimensional model created within GeoScene3D to visualize the subsurface, particularly the Dakota Sandstone in western Sarpy County.

Nebraska↗
USGS2026

Asynchronous landslide seasonality across the United States

Mid-range landslide outlooks can facilitate weather-related landslide preparedness and disaster response planning, but seasonal landslide activity remains poorly quantified at continental scales. Leveraging >55,000 reported landslides from across the United States (U.S.), we used circular statistics to quantify landslide seasonality in 67 National Weather Service County Warning Areas (CWAs). We found regional differences in landslide season timing and duration, with transitions between domains variably corresponding to climate class or river basin. We assessed differences in seasonality by movement type for slides, flows, and falls, detecting apparent, but uncertain, differences between slide and fall seasonalities in 27 of 35 (77%) of CWAs with both types reported. In the Pacific Northwest, where long records exist, we found a credible shift toward a later mean landslide season in western Washington from 1990 to 2020, but no trend in western Oregon. Our results can provide emergency planners a resource to assess seasonal landslide probability nationwide.

Geophysical Research Letters↗