USGS Science⌕ Search

SEARCH · USGS Science

Results for “Australian Journal of Earth Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 88Linked to original sources
USGS2026

Ductile and brittle Rio Grande Rift deformation in Oligocene granite records a two-stage rift history in southern Colorado

The timing and nature of early deformation in the Rio Grande Rift remains poorly constrained. We present evidence for the earliest structural signature of rift extension in the Sangre de Cristo Range, southern Colorado, based on new geologic mapping, structural analysis, rock magnetic data, and thermochronology. These analyses focus on the ~30.0 Ma granite of Chokecherry Canyon, which hosts discrete low-angle mylonitic shear zones and a distributed, gently SW-dipping protomylonitic fabric. Incremental stretching axes, stretching lineations, and Kmax magnetic lineations plunge gently WSW. Quartz microstructures and crystallographic orientations indicate dominantly coaxial strain in the protomylonite and general shear in the discrete shear zones. Quartz c-axis opening-angle thermometry suggests deformation at ~420–540°C. Thermal modeling of ⁴⁰Ar/³⁹Ar K-feldspar data indicates rapid post magmatic cooling below the brittle–plastic transition, supporting shear-zone formation immediately after emplacement. Slow cooling from ~20–13 Ma was followed by renewed rapid cooling at ~13 Ma, interpreted as the onset of extensional exhumation along the Sangre de Cristo Fault System. These results show that extension in the northern Rio Grande Rift was active by ~30 Ma, earlier than previously recognized. We propose a two-stage model for northern Rio Grande Rift evolution: Stage I (30–23 Ma) records ENE–WSW extension localized in low-angle mylonitic shear zones associated with mid-crustal intrusions; Stage II (≤18 Ma) reflects brittle high-angle normal faulting, focused exhumation, and rift narrowing. Stage I magmatism and deformation along the western range front likely established crustal weaknesses that guided later fault development.

Colorado↗
USGS2026

Extreme precipitation variability and soil texture controls on water-table response

Extreme precipitation events (EPEs), a key class of hydrometeorological extremes, are intensifying globally under climate change; however, their effects on water-table dynamics across varying soil textures remain poorly understood. To better understand the impacts of EPEs, we conducted one-dimensional modeling to evaluate water-table response time, displacement, recession time, and total recharge under EPEs of 0.20 m, 0.40 m, and 0.60 m amounts, applied over 1-, 7-, and 20-day durations across twelve soil textures. The results show that coarse soils (i.e., sand) respond within days, while fine soils (i.e., clay) may take over 200 days. Water-table displacement ranged from 0.30 to 1.64 m and increased with EPE magnitude. The time it took for water tables to recede ranged from 1.2 to 3.0 years. A first-order estimate of total possible recharge, calculated from porosity and displacement, ranged from 17% (clay) to 97% (sand), averaging ~63% across soil textures. These findings highlight that recharge is primarily governed by EPE magnitude and soil properties, not event duration. This modeling effort provides new insight into how soil texture modulates groundwater response to extreme precipitation, informing future water budget and resilience assessments.

Water↗
USGS1998

Methods and guidelines for effective model calibration; with application to UCODE, a computer code for universal inverse modeling, and MODFLOWP, a computer code for inverse modeling with MODFLOW

This report documents methods and guidelines for model calibration using inverse modeling. The inverse modeling and statistical methods discussed are broadly applicable, but are presented as implemented in the computer programs UCODE, a universal inverse code that can be used with any application model, and MODFLOWP, an inverse code limited to one application model. UCODE and MODFLOWP perform inverse modeling, posed as a parameter-estimation problem, by calculating parameter values that minimize a weighted least-squares objective function using nonlinear regression. Minimization is accomplished using a modified Gauss-Newton method, and prior, or direct, information on estimated parameters can be included in the regression. Inverse modeling in many fields is plagued by problems of instability and nonuniqueness, and obtaining useful results depends on (1) defining a tractable inverse problem using simplifications appropriate to the system under investigation and (2) wise use of statistics generated using calculated sensitivities and the match between observed and simulated values, and associated graphical analyses. Fourteen guidelines presented in this work suggest ways of constructing and calibrating models of complex systems such that the resulting model is as accurate and useful as possible.

Water-Resources Investigations Report↗
USGS2024

Telecommunications fiber for sensing earthquake aftershocks: Progress and hurdles

Aftershocks offer valuable clues to earthquake behavior. The challenge: quickly deploying sensors to capture the early details of earthquake ruptures within the zone of aftershocks. Telecommunication fibers might be an answer, providing denser networks in otherwise difficult areas, potentially faster than traditional methods.

Conference Paper↗
USGS2026

CRESCENT earthquake dynamic rupture, earthquake cycle, and tsunami code verification platform

Physics-based simulations are critical for understanding natural hazards. The increasing complexity of numerical codes requires benchmark exercises to verify that different computational methods yield consistent results when solving the same governing equations. Here, we present an open-access web platform designed for the verification of earthquake dynamic rupture, seismic cycle, and tsunami simulations. The platform architecture utilizes a modular, serverless backend on Amazon Web Services (AWS) to provide scalable file processing and visualization. A lightweight static web application provides a secure interface for uploading and managing results, while the browser-based data visualization enables interactive analysis of time series and surface grid data. By using structured JavaScript Object Notation (JSON) text files to define benchmark structures, the system remains fully extensible, allowing the addition of new scenarios without modifying the underlying software logic. The platform hosts the "The Tsunami Problem Versions" (TTPV) 1 & 2, two benchmarks for 3D fully coupled earthquake dynamic rupture and tsunami generation, and provides a framework for earthquake cycle models. This community resource aims to build trust in numerical simulations and facilitate long-term collaborative code verification as modeling software continues to evolve.

Seismica↗
USGS2025

Preventing overfitting when using tree-based methods for mapping hydrothermal favorability

Ensemble tree-based algorithms are robust tools for estimating sparsely distributed resources with non-linear dependencies (e.g., hydrothermal systems). These algorithms naturally accommodate the threshold conditions necessary to enable and support hydrothermal systems (e.g., having sufficient heat and permeability) and are simpler than many other non-linear machine learning strategies (e.g., artificial neural networks), which is an advantage when working with few labeled examples from which to learn. In previous work, we used eXtreme Gradient Boosting (XGBoost) to produce regional prediction and uncertainty maps of hydrothermal favorability; however, recent studies suggest that, even when properly applied, XGBoost has some risk of overfitting when there are few labeled examples from which to learn. To evaluate overfitting when constructing hydrothermal favorability maps with tree-based methods, we compare XGBoost with Extremely Randomized Trees (ExtraTrees), another ensemble tree-based algorithm that has the potential to underfit when using few labeled examples. We hold all other modeling parameters constant, resulting in two contrasting favorability maps of conventional geothermal resources for the Great Basin. Our results indicate that ExtraTrees demonstrably reduces overfitting compared with XGBoost. After considering overall performance, we conclude that ExtraTrees provides a more suitable modeling approach than XGBoost for the purposes of conventional hydrothermal resource assessments.

Conference Paper↗
USGS2026

A practical framework for identifying genetic subpopulations and ESUs: Insights for IUCN assessments and broader management

Species conservation assessments evaluate extinction risk, and recovery potential, advancing species persistence through guiding resource prioritization and planning. Assessment frameworks, including the International Union for Conservation of Nature Red List and Green Status of Species, typically focus on species as a whole. Importantly, they do not routinely account for genetically distinct units or do not have standardized methods of unit delineation. This limits the representation of genetically distinct components, including adaptive genetic diversity that underpins long-term resilience and recovery. Incorporating standardized within-species units like subpopulations and Evolutionarily Significant Units (ESUs) into species assessments could help address this oversight. However, identifying and delineating such units remain challenging, particularly when molecular data are limited. Here, we propose a flexible framework that integrates molecular and non-molecular evidence to identify both subpopulations and ESUs across taxa, providing a practical tool to incorporate within-species diversity into conservation assessments.

BioScience↗
USGS2024

Reduced injection rates and shallower depths mitigated induced seismicity in Oklahoma

The proximity of wastewater disposal to the Precambrian basement is a critical factor influencing induced earthquake rates in the Central United States, but the impact of reducing injection depths has not been widely demonstrated. Beginning in 2015, state regulatory efforts in Oklahoma and Kansas mandated that wells injecting into the lower Arbuckle Group, a basal sedimentary unit, be backfilled with cement (i.e. “plugged back”) so that they inject into shallower formations. This plug back activity gives us a unique opportunity to investigate the relationship between injection depth and induced seismicity rate. To evaluate the impact that decreased injection rates and plug backs had on the seismicity rates, we create a suite of rate-state earthquake models. Observed seismicity rates are best fit when only lower Arbuckle volumes are considered, suggesting the lower Arbuckle injectors were primarily responsible for the seismicity and that plug backs were effective at isolating the injected volumes to shallower formations. Our models demonstrate that if these wells had not been plugged back, seismicity rates would be multiple times larger than they are today. We find that the combination of well plug backs and injection volume decreases can be effective strategies for reducing induced seismicity rates.

Oklahoma↗
USGS2026

Comparative crop yield forecasting using satellite-derived biophysical and agro-climatic predictors in Sub-Saharan Africa

Timely and accurate crop yield forecasting is central to food security early warning systems, particularly in climate-vulnerable regions. While operational forecasting frameworks commonly rely on precipitation and vegetation indices such as NDVI, their ability to provide actionable lead time remains limited. Here, we evaluate the added value of satellite-derived biophysical Essential Climate Variables (ECVs): Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation (FAPAR), for forecasting millet yield in Burkina Faso (BF) and maize yield in South Africa (ZA) and Malawi (MW). Using Random Forest models, we quantify forecast skill across the growing season at both national and sub-national scales. Results show that LAI and FAPAR provide effective forecast lead times of approximately 4 months in BF, 2 months in ZA, and up to 6 months in MW relative to harvest. At peak performance, Mean Absolute Percentage Error (MAPE) reaches 19.8% (LAI) and 23.8% (FAPAR) in BF, 12.0% and 9.8% in ZA, and 21.8% and 20.8% in MW, respectively. Across countries, biophysical parameters often outperform NDVI and precipitation, particularly in arid and semi-arid regions. At the sub-national level, LAI and FAPAR enable classification of administrative units into high and moderate-skill forecast units, revealing strong spatial heterogeneity linked to crop dominance. However, forecast skill declines where the target crop is not the dominant type, highlighting an important limitation for operational deployment. Overall, the findings suggest that satellite-derived biophysical parameters can provide earlier and more spatially resolved yield signals than commonly used predictors, with potential to improve the timeliness and effectiveness of food security early warning systems.

Remote Sensing Applications: Society and Environme↗
USGS2025

USGS addresses needs for lithium calibration and quality control materials for pLIBS analysis

Lithium (Li) is a globally important commodity used for energy storage, national defense, human health, and advanced technologies. Lithium resource development requires identifying deposits with elevated concentrations and optimal mineralogy, typically associated with select clays and pegmatites. Lithium is a light, highly reactive alkali metal with low atomic mass that is difficult to detect and quantify using conventional portable geochemical techniques such as X-ray fluorescence (XRF). However, portable laser-induced breakdown spectroscopy (pLIBS) is a powerful analytical technique for lithium exploration due to its ability to analyze solids quickly with minimal preparation. The expanded utility of pLIBS is hampered by the lack of matrix-matched calibration and quality control (QC) materials. The United States Geological Survey (USGS) has developed in-house lithium calibration and QC materials for lithium in clay and pegmatite matrices to address this limitation. We present the workflow and implementation of a custom-built matrix specific calibration on a SciAps Z-300 pLIBS, using proprietary Profile Builder software. The implementation of the custom calibration and quality control standards enables us to collect semiquantitative results directly from the pLIBS while in the field. Ultimately, this calibration has improved confidence in sample selection and collection in the field, providing more efficient site characterization.

Conference Paper↗
USGS2025

Tracing mercury from land to river: Global sources, retention, and implications for sustainability

Mercury (Hg) pollution in river systems is a global sustainability challenge. Yet the transport, transformation, and retention of Hg within global rivers remain poorly quantified, particularly in regions with sparse observations such as Southeast Asia and Africa, hindering effective pollution mitigation and reinforcing geographic inequities in scientific knowledge and environmental governance. Here, we present the first global, high-resolution simulation of riverine Hg dynamics using a process-based model that traces Hg from land-based sources through river networks to the ocean. Under a realistic scenario, we estimate that ~1,900 megagrams per year (Mg/yr) of Hg enters global rivers, including 1,500 Mg/yr from human-induced sources and 400 Mg/yr from soil erosion. Nearly half of this flux (~1,000 Mg/yr) is retained in reservoirs and dams, which act as major sinks. While such retention limits downstream delivery to the oceans, it also heightens in-reservoir Hg methylation risks. By bridging the gap between Hg releases and observed riverine exports, our framework offers a scalable tool for data-limited regions, promotes data access, and supports global freshwater and pollution-management strategies.

EarthArXiv↗
USGS2024

New developments at the Center for Engineering Strong-Motion Data (CESMD)

The Center for Engineering Strong-Motion Data (CESMD), an internationally utilized joint center of the U.S. Geological Survey (USGS) and the California Geological Survey (CGS), provides a single access point for earthquake strong-motion records and station metadata from the CGS California Strong-Motion Instrumentation Program (CSMIP), the USGS National Strong-Motion Project (NSMP), the USGS Advanced National Seismic System, and other affiliates. The CESMD has been continuously improving its webtools to facilitate the access of strong-motion data and metadata for use in post-earthquake response and for scientific and engineering research applications. The Center provides raw and processed strong-motion data via the Engineering Data Center (EDC) and the Virtual Data Center (VDC) web portals. This paper focuses on the strong-motion products provided by the EDC where more than 48,000 records with peak ground accelerations greater than 0.1% g from over 2400 earthquakes are currently hosted. and on the ongoing efforts to develop data access tools and applications. The new developments and ongoing efforts in the EDC include: 1) enhancements to the CESMD webservices to facilitate access to station metadata, earthquake information, and strong motion records 2) new features to the interactive map interface, improving the visualization and access to earthquake, station, and record information, 3) efforts to develop a new web application tool for data format conversion from a number of data formats, 4) efforts to unify varying waveform data formats into a consistent format, 5) ongoing efforts to compile seismic station site geology, measured or inferred Vs30 values, shear-wave profiles, NEHRP site class, and available structural instrument deployment schematics, and 6) a special studies pages for research topic-specific ground motion datasets that offer uniform processing of records from a variety of sources.

Conference Paper↗
USGS2025

Combining scanning electron microscopy, X-ray diffraction, and X-ray fluorescence to characterize shear zones at the Pogo gold deposit, Alaska

This study employs a multi-method analytical approach to characterize the mineralogical, geochemical, and textural properties of fault rocks from the Pogo gold mine in the Yukon-Tanana Upland, central Alaska. Specifically, we examine cataclasites, to document the structural and geochemical evolution of shear zones and their associations with gold mineralization. To investigate the shear zone, we integrate portable X-ray fluorescence (pXRF), scanning electron microscopy-based automated mineralogy (SEM-AM), X-ray diffraction (XRD), and high-resolution micro-X-ray fluorescence (micro-XRF) mapping. These methods collectively provide insights into bulk and trace element chemistry, mineralogical composition, and deformation-related textures across multiple scales. Handheld pXRF enables rapid geochemical screening, guiding SEM-AM and XRD analyses to ensure consistent mineralogical interpretation. X-ray diffraction identifies and quantifies crystalline phases, while SEM-AM produces high-resolution mineral maps, revealing mineral abundances, grain-scale textures, and gold associations. Micro-XRF mapping further refines our understanding by showing visual trace element distributions at sub-millimetre resolution. By integrating these techniques, we improve our understanding of the nature and geochemistry of Pogo shear zones, their role in gold mineralization, and support metallurgical processing strategies. This approach enhances exploration models and resource characterization for structurally complex gold deposits.

Alaska↗
USGS2024

Preparing for today's and tomorrow's water-resources challenges in eastern Long Island, New York

Freshwater is a vital natural resource. Although New York is a water-rich State, the wise and economical use of water resources is needed to ensure that there is enough water of adequate quality for both human and ecological needs—both for today and for tomorrow. Nowhere in New York is this more evident than in Nassau and Suffolk Counties on Long Island, where the public water supply is obtained from the sole-source aquifers located directly beneath the nearly 3 million people who live there. In 2023, in eastern Long Island’s Suffolk County, groundwater was pumped from these aquifers by more than 1,100 public water-supply wells to meet the needs of about 1.5 million people.

New York↗
USGS2024

GRAPES: Earthquake early warning by passing seismic vectors through the grapevine

Estimating an earthquake's magnitude and location may not be necessary to predict shaking in real time; instead, wavefield-based approaches predict shaking with few assumptions about the seismic source. Here, we introduce GRAph Prediction of Earthquake Shaking (GRAPES), a deep learning model trained to characterize and propagate earthquake shaking across a seismic network. We show that GRAPES’ internal activations, which we call “seismic vectors”, correspond to the arrival of distinct seismic phases. GRAPES builds upon recent deep learning models applied to earthquake early warning by allowing for continuous ground motion prediction with seismic networks of all sizes. While trained on earthquakes recorded in Japan, we show that GRAPES, without modification, outperforms the ShakeAlert earthquake early warning system on the 2019 M7.1 Ridgecrest, CA earthquake.

Shimane/HiroshimaPrefectures↗
USGS2026

Incorporating location uncertainty improves inference with stop-level North American Breeding Bird Survey data

Ecological models should account for uncertainty to be most effective and useful. Yet, uncertainty from model covariates—unlike that from other sources, such as sampling error or process variability—is seldom explicitly incorporated. This can cause underestimates of uncertainty to cascade through model parameter estimates, predictions, and downstream uses. Burner et al. proposed a method for quantifying uncertainty in covariates and incorporating it into models using informative Bayesian priors. This method was applied to stop-level Breeding Bird Survey (BBS) analyses, where land cover uncertainty at each stop arises from substantial stop location uncertainty. A limited validation of model-estimated land cover, using stops with known locations, indicated the method’s potential effectiveness, but it was not rigorously evaluated. We conduct a robust simulation-based test, generating stop locations, extracting land cover, and simulating bird communities across 210 BBS routes in the upper Midwest. We compare 3 models: a “known” model with true land cover, a “naive” model assuming consistent 800-m stop spacing, and a “full” model using informative priors to estimate land cover. Species parameter estimates and predicted prevalence patterns across gradients in land cover from the full model approached those of the known model and were substantially closer to the true values used in simulations relative to those from the naive model. Naive model parameters were more biased relative to the other models, and credible intervals of predicted species prevalence rarely included the true simulated values. The full model also produced land cover covariate estimates closer to true simulation values relative to the mean informative priors. Our results show that, for the BBS, informative priors enable more accurate stop-level analyses despite location uncertainty. In contrast, naive models that ignore this uncertainty yield poor inferences. More broadly, we demonstrate empirically the utility of informative priors to account for covariate uncertainty in ecological models.

Michigan, Minnesota, Wisconson↗
USGS2024

Groundwater flow model for the Des Moines River alluvial aquifer near Des Moines, Iowa

Des Moines Water Works (DMWW) is a regional municipal water utility that provides residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model. A conceptual and numerical groundwater flow model have been developed to characterize the Des Moines River alluvial aquifer under existing conditions, to simulate water levels observed in the RCWs, and to provide publicly accessible hydrologic data and research that advance understanding of the regional hydrologic system and can potentially be used in the future to evaluate groundwater production scenarios. Model performance was assessed by comparing observed and simulated groundwater levels that included water level elevations, water level changes, water level inequality observations, surface water streamflow, and change in surface water volume from upstream to downstream. Water table elevation in the aquifer layers is on average slightly overestimated with average absolute value error less than 1.5 meters at both RCWs and less than 2.5 meters for all observation wells in the alluvial aquifer layers. The model also accurately simulated water tables greater than the RCW design minimum (a water level threshold at which RCW pumping is reduced) in all timesteps for which water level observation data existed. Water table elevation error was higher in other model layers that were not the focus of the study, and the model did not accurately match streamflow targets.

Iowa↗
USGS2024

Simulating present and future groundwater/surface-water interactions and stream temperatures in Beaver Creek, Kenai Peninsula, Alaska

In many places, coldwater ecosystems are facing increasing pressure from anthropogenic warming. This study examined stream temperatures and the water balance in the Beaver Creek watershed on the Kenai Peninsula in south-central Alaska—an area that is experiencing rapid warming. Low-gradient streams near the Kenai coast provide important spawning and rearing habitat for salmon but may be especially vulnerable to rising temperatures, because of long residence times, inflows from abundant riparian wetlands, and reliance on groundwater discharge that may also warm, or decrease in volume with rising evapotranspiration. In recent decades, observed maximum 7-day temperatures have consistently exceeded statistical (regression-based) projections. Here we simulate total streamflows and temperatures with a physics-based model that links the Soil Water Balance, MODFLOW 6 and SNTEMP simulation codes on a 7-day timestep. The model is based on existing data and groundwater levels, instream flows, and stream temperatures collected during 2019–23. Future climate scenarios were developed for 2023–50 from downscaled climate projections. Results indicate that groundwater discharge is about 64 percent of the total streamflow during the months of May through September. Total streamflow and groundwater discharge are expected to remain similar to current conditions through 2050. Stream temperatures are expected to rise; by midcentury, near the Beaver Creek mouth the model predicts 34 to 63 additional days per year with average weekly temperatures above 13 degrees Celsius, 14 to 81 additional days with average weekly temperatures above 15 degrees Celsius, and routine exceedances of 20 degrees Celsius during the warmest periods. Projected stream temperatures vary spatially. Areas of high groundwater inflows in the lower main stem and some tributaries may be most resilient to warming air temperatures during dry conditions. During storm events, groundwater-dominated tributaries may have the coolest stream temperatures.

Alaska↗