SEARCH · USGS Science

Results for “Photogrammetric Engineering and Remote Sensing (PE&RS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,691 records · Page 87Linked to original sources

USGS2025

Modeling interconnected minerals markets with multicommodity supply curves: Examining the copper-cobalt-nickel system

Demand for many of the metals used in the energy transition is expected to grow rapidly. Many of these are by-products, often considered critical because their production responds weakly to prices and is instead tied to the economics of the host mineral. We present a model of prices and production for jointly produced commodities that accounts for interconnectivity between host and by-product markets at the mine level. We demonstrate this method using the copper–cobalt–nickel system, in which approximately 99% of cobalt is a by-product of copper or nickel mining. Our results show that the model more accurately captures the economic benefits of diversified mine outputs than previous approaches. Furthermore, changes in demand drivers for any two commodities produce non-linear effects on production and price. We challenge the prior best-practice assumption that cobalt cannot impact the copper or nickel markets. Recognizing the importance of both copper and cobalt for future electrification, we emphasize that incentivizing the copper industry to reduce cobalt supply risks could inadvertently undermine copper supply.

Nature Communications↗

USGS1995

Effects of waste-disposal practices on ground-water quality at five poultry (broiler) farms in north-central Florida, 1992-93

Waste-disposal areas such as chicken-house floors, litter stockpiles, fields that receive applications of litter, and dead-chicken pits are potential sources of nitrates and other chemical constituents in downward-percolating recharge water. Broiler- farms in north-central Florida are concentrated in a region where the Upper Floridan aquifer is unconfined and susceptible to contamination. Eighteen monitoring wells installed at five sites were sampled quarterly from March 1992 through January 1993. Increases in median concentrations of constituents relative to an upgradient well were used to determine the source of the nitrate at two sites. At these sites, increases in the median concentrations of nitrate as nitrogen in ground water in the vicinity of waste-disposal areas at these sites were: 5.4 mg/L for one chicken house; 9.0 mg/L for a second chicken house; 2.0 mg/L for a fallow field that received an application of litter; and, 2.0 mg/L for a dead-chicken pit. At the three remaining sites where the direction of local ground-water flow could not be ascertained, the sources of concentrations of nitrate and other constituents could not be determined. However, median nitrate concentrations in the vicinity of waste-disposal areas at these sites were: 45.5 mg/L for a set of two chicken houses; 3.0 mg/L for a stockpile area; and 2.1 mg/L for a hayfield that received an application of litter. The nitrate concentration in ground water in the vicinity of a field that had previously received heavy applications of litter increased from 3.0 mg/L to 105 mg/L approximately 4 months after receiving an application of commercial fertilizer. Increases in concentrations of organic nitrogen in ground water in the vicinity of waste-disposal areas may be related to the decomposition of litter and subsequent movement with downward percolating recharge water.

Florida↗

USGS2025

Stratigraphic notes—Volume 2, 2025

This is the second volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 .

Professional Paper↗

USGS2026

Stratigraphic notes—Volume 3, 2026

This is the third volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 .

Professional Paper↗

USGS2025

Uncertainty reduction for subaerial landslide-tsunami hazards

Subaerial rock slopes may generate a tsunami by rapidly moving into the water. Large uncertainty in landslide characteristics propagates into large uncertainty in tsunami hazard, making hazard assessment more difficult for land and emergency managers. Once a potentially tsunamigenic landslide is identified, it may not be clear which landslide characteristics contribute most significantly to uncertainty in the tsunami hazard. Our aim is to document the relative worth of different landslide characteristics (e.g., size, material properties) for reducing uncertainty in landslide-tsunami hazard assessments. Isolating the relative importance of specific landslide characteristics may inform prioritization of data collection and improve efficiency in understanding hazard. To accomplish this, we generated a set of 288 landslide-tsunami simulations in which we systematically varied the size and material properties of possible failure extents at the Barry Arm landslide complex in northwestern Prince William Sound, Alaska, USA. We find that for landslides smaller than the receiving waterbody, the landslide volume has the strongest effect on resulting wave characteristics and thus the highest leverage on reducing uncertainty in tsunami hazard. In contrast, for landslides substantially larger than the waterbody, the duration of rapid movement of the landslide has the highest leverage. Based on our results, we propose a classification scheme for subaerial landslides based on the relative size of the landslide and waterbody. Additionally, our results support the generation of a tsunami height transfer function between existing tide gages and a nearby coastal city. These results have direct implications for the practice of operational early warning.

Alaska↗

USGS2025

Critical Minerals in Ores (CMiO) database

Critical minerals are commodities essential to modern industrial and strategic technologies and are highly vulnerable to supply chain disruption. The Critical Minerals Mapping Initiative (CMMI) is a collaboration among the U.S. Geological Survey (USGS), the Geological Survey of Canada, and Geoscience Australia that aims to deepen global understanding of where critical minerals are located. A key output of this initiative is the Critical Minerals in Ores (CMiO) database that is advancing our collective understanding of critical minerals distributions. For instance, publicly available data on the concentrations of many critical minerals are sparse because these commodities can only be produced in small, yet essential, quantities compared to the primary commodities like copper and zinc. The CMiO database helps bridge this gap by offering high-quality, multielement geochemical data from a wide variety of critical mineral-bearing deposits around the world. Importantly, it uses a novel consensus deposit environment, group, and type classification scheme developed by the agencies that allows comparisons among ore deposits from different regions. The CMiO database contains geochemical data for more than 20,000 samples from more than 100 deposit types comprising 10 deposit environments.

Fact Sheet↗

USGS2026

Earthquake rupture arrest from depth‐dependent frictional stability on the Pütürge segment of the East Anatolian Fault Zone, Türkiye (Turkey)

Determining why earthquake ruptures stop is a central challenge in earthquake science and seismic hazard assessment. The Pütürge segment of the East Anatolian Fault Zone, Türkiye, exhibits shallow creep (<∼3 km depth) yet hosts M > 6.5 earthquake ruptures at greater depth. Here, we evaluate whether variations in frictional stability along this segment aided arrest of the 2020 M 6.7 Elaziğ and 2023 M 7.8 Pazarcık earthquake ruptures. Analysis of Sentinel‐1 Synthetic Aperture Radar imagery indicates the 2023 M 7.8 rupture propagated laterally into a metamorphic massif within the Pütürge segment, where slip rapidly decayed below detection limits. Creepmeters along this segment recorded no significant surface afterslip (<3 mm) in the following year. To investigate this fault‐slip behavior, we conducted triaxial friction experiments on Pütürge fault gouge sampled from an outcrop exposure. The gouge, composed primarily of muscovite, quartz, and calcite, is velocity strengthening at conditions approximating 0–2.5 km depth and velocity weakening at 4–5 km depth. This transition to velocity‐weakening friction is associated with enhanced comminution and shear localization observed microstructurally. Our results suggest that depth‐dependent frictional stability of the Pütürge fault segment facilitates rupture nucleation and propagation at depth while maintaining rupture‐arresting behavior near Earth’s surface.

Pütürge segment of the East Anatolian Fault Zone↗

USGS2024

Evidence for low effective stress within the crust of the subducted Gorda plate from the 2022 December Mw 6.4 Ferndale earthquake sequence

Stress levels on and adjacent to megathrust faults at seismogenic depths remain a key but difficult to constrain parameter for assessing seismic hazard in subduction zones. Although strong ground motions have been observed to be generated from distinct, high-stress regions on the downdip end of the megathrust rupture areas in many great earthquakes, we lack direct constraints on the stress level in the lower seismogenic portion of the Cascadia megathrust. On 2022 December 20, a M w 6.4 strike-slip earthquake occurred near Ferndale, California in southern Cascadia and likely ruptured the Gorda slab crust in the lower seismogenic portion, providing an opportunity to assess the stress level in this region. Here, we relocate the Ferndale mainshock and the first two weeks of aftershocks using a high-resolution 3-D velocity model and estimate rupture dimensions, directivity, and stress drop for several M w 4-5 aftershocks and recent earthquakes. The aftershocks define a strike-slip fault in the slab crust striking ENE, consistent with the mainshock focal mechanism. The orientation of this fault is about 45 ° off the ideally oriented fault plane given the stress state in the slab. The aftershock zone is extensive and broad in the forward direction of the mainshock rupture but still constrained within the volume of high Vp/Vs within the slab crust. Our stress drop estimates are generally lower for M w 4-5 earthquakes located within the slab crust compared to those a few km deeper in the slab mantle. Combined, our results support a relatively low effective stress level in the vicinity of the megathrust in the lower portion of the seismogenic zone in southern Cascadia, likely due to elevated fluid pressures. Consequently, the ground motion in the onshore region above this low-stress seismogenic portion in southern Cascadia may not be as intense as that observed during great earthquakes in other subduction zones.

California↗

USGS2025

Utilizing downhole datasets for modelling the aeromagnetic signature of the Iron Creek Co-Cu deposit in the Idaho Cobalt Belt

The Idaho Cobalt Belt in east-central Idaho is host to some of the largest domestic Co resources, including the informal Iron Creek deposit. The two main ore zones of this deposit, the Iron Creek and the Ruby, are hosted in greenschist-grade interbedded argillite/siltstone and quartz-rich units of the Mesoproterozoic Apple Creek Formation of Lemhi Group. The primary ore mineral is cobalt-bearing pyrite, which occurs with pyrrhotite, chalcopyrite, and magnetite. This study integrates mineralogical and core-scale geophysical measurements with regional-scale aeromagnetic surveys. The high magnetite content within the Ruby zone produces elevated magnetic susceptibility, but the relatively limited spatial footprint of the ore zone would produce a small-scale anomaly that may be overlooked in regional surveys. The low magnetite content in the Iron Creek zone results in low magnetic susceptibility, creating a relatively low amplitude geophysical response. By characterizing the magnetic properties and mineralogy of these ore zones, this study enhances the interpretation of aeromagnetic data, enabling the identification of small or faint anomalies as potential Co targets. These findings improve can improve exploration strategies, both within the Idaho Cobalt Belt as well as for similar deposit types globally.

Idaho↗

USGS2025

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana↗

USGS2026

Key minerals in energy transmission

The electrical grid relies on minerals with unique properties to transform, transmit, and convert electricity. Transmission needs are growing—to support the expansion of data centers and link diverse energy resources into the grid. This expansion will require greater quantities of minerals. Although some minerals are produced in the United States, the United States relies on imports for others. This infographic shows the key minerals that support energy transmission, and how reliant the United States is on imports for these minerals.

General Information Product↗

USGS2024

SCEC/USGS Community Stress Drop Validation Study: How spectral fitting approaches influence measured source parameters

Spectral source parameters used to estimate an earthquake’s stress drop (Δσ) can vary significantly across measurement approaches. The Statewide California Earthquake Center/U.S. Geological Survey Community Stress-Drop Validation Study was initiated to compare source parameter estimates, focusing initially on a dataset from the 2019 Ridgecrest earthquake sequence. As part of that validation effort, here we focus on one potential source of uncertainty: whether spectral fitting approaches alone, applied to a common set of spectra from the 2019 Ridgecrest sequence result in different source parameter estimates. By using a common set of benchmark spectra analyzed across a consistent frequency band of 1–40 Hz, we eliminate many sources of variability. A subgroup of validation study participants volunteered to estimate the low-frequency displacement (Ω0) and corner frequency ( f c ) by fitting a smooth function to benchmark displacement spectra. Participants used linear- or log-sampled spectra, assumed a Brune or Boatwright spectral model, and applied different misfit criteria. We compare 17 approaches used to estimate Ω0, f c , and Δσ for 54 earthquake spectra. Our results reveal that 35% of events have Δσ estimates within a factor of two, whereas others exhibit variations exceeding an order of magnitude. The variability in Ω0 and f c can largely be attributed to whether a spectrum is consistent with the smooth function of an idealized simple crack model. The trade-off between Ω0 and f c may be more pronounced when using linearly sampled spectra, as higher frequency spectral bumps control the fits. As expected, methods that assumed a Boatwright model tended to have lower Ω0 and somewhat higher f c compared to those assuming a Brune model, although resulting Δσ estimates are similar. When compared to the overall validation study results, the fitting approach alone may account for between 5% and 90% (25% on average) of the total variability in spectral Δσ.

California↗

USGS2026

Distributed faulting of the northern West Napa Fault Zone in Napa Valley, California

Mapped surface ruptures from the 24 August 2014 M w 6.0 South Napa earthquake in the Napa Valley, California, show a 2‐km‐wide zone of distributed faulting in the southern and central West Napa fault zone (WNFZ). In the northern WNFZ at Hendry Winery (HW), however, the mapped 2014 surface ruptures encompass an ∼100‐m‐wide zone, implying significant narrowing of the near‐surface fault zone to the north. We present a tomographic shear‐wave velocity ( ⁠⁠ V S ) model and guided‐wave data that indicate the northern WNFZ is at least 400‐m wide, with multiple near‐surface fault traces. Our V S model shows that the 2014 surface ruptures are underlain by discrete low‐velocity zones (LVZs), and coincident guided‐wave data show that the LVZs carry fault‐zone guided waves. If nearby (<500 m) mapped faults to the east of HW are part of the WNFZ, the entire WNFZ is more than 1 km wide in the northern Napa Valley. WNFZ guided waves travel up to 38% slower than S body waves, and low‐strain guided‐wave shaking is up to five times stronger than the associated body‐wave shaking. Our data suggest that guided waves, traveling along distributed faults, may result in an increased shaking hazard over a 1‐km‐wide area of the northern Napa Valley during future significant earthquakes. In places, the 2014 surface ruptures were difficult to find one year after the earthquake, and paleoseismic trenching showed only weak evidence for faulting, which may not have been identified in trenches if the locations of the 2014 surface ruptures had not been previously mapped ( Prentice et al. , 2015 ). Guided‐wave and V S tomography data, however, show strong evidence for faulting beneath the 2014 surface ruptures and at locations to the east. Although paleoseismic trenching is the gold standard for identifying near‐surface faulting, methods such as peak ground velocities of guided waves may better identify immature near‐surface fault traces.

California↗

USGS1976

Diamond drilling at the Ma'milah Mine, Kingdom of Saudi Arabia

The Ma'millah gold mine is about 90 km southeast of At Ta'if at lat 21°03'N., long 41°18'E., in southwestern Saudi Arabia. The deposit, which was worked extensively by ancient miners, consists of several veins and massive lenses of quartz along a regional fault. The extensive ancient mine workings, large size of some quartz outcrops, and significant gold content of several samples indicated that subsurface exploration was warranted. Accordingly, two holes were drilled into the deposit during the interval December 1972 to February 1973. The drill findings were disappointing; the grade of vein material was found to be too low to be of economic interest and the quartz bodies were found to pinch out both along strike and downdip. The drilling program therefore was terminated. The deposit is not worth further exploration

Ma'milah Mine↗

USGS2024

The importance of nodal plane orientation diversity for earthquake focal mechanism stress inversions

Inversions of earthquake focal mechanisms are among the most accessible and reliable methods for determining crustal stress. However, the use of this method varies widely, and assumptions that underpin it are often violated, potentially compromising stress estimates. We investigate the consequences of violating the little-studied assumption that the focal mechanisms have diverse orientations. Our approach is to employ data-informed synthetic mechanisms, with nodal plane orientations defined by recent earthquake lineaments in the Midland Basin, western Texas, and rakes consistent with slip in the mapped stress field. Using both the traditional stress inversion method that assumes constant shear stress magnitudes on the causative faults as well as a recently published variable shear stress method, we show that low fault plane diversity can cause maximum horizontal stress ( S Hmax ) orientation and relative principal stress magnitude (faulting regime) estimates to differ markedly from the true values. This problem is compounded for catalogs with even modest amounts of noise (≤15°) or few (e.g., 20) mechanisms. Significantly, traditional approaches for quantifying uncertainty such as the bootstrap can severely underestimate the true uncertainty under these circumstances. To remedy this, we provide simple tools to quantify nodal plane orientation diversity and stress inversion reliability.

Geological Society of London Special Publications↗

USGS2025

Analyzing multi-year nitrate concentration evolution in Alabama aquatic systems using a machine learning model

Rising nitrate contamination in water systems poses significant risks to public health and ecosystem stability, necessitating advanced modeling to understand nitrate dynamics more accurately. This study applies the long short-term memory (LSTM) modeling to investigate the hydrologic and environmental factors influencing nitrate concentration dynamics in rivers and aquifers across the state of Alabama in the southeast of the United States. By integrating dynamic data such as streamflow and groundwater levels with static catchment attributes, the machine learning model identifies primary drivers of nitrate fluctuations, offering detailed insights into the complex interactions affecting multi-year nitrate concentrations in natural aquatic systems. In addition, a novel LSTM-based approach utilizes synthetic surface water nitrate data to predict groundwater nitrate levels, helping to address monitoring gaps in aquifers connected to these rivers. This method reveals potential correlations between surface water and groundwater nitrate dynamics, which is particularly meaningful given the lack of water quality observations in many aquifers. Field applications further show that, while the LSTM model effectively captures seasonal trends, limitations in representing extreme nitrate events suggest areas for further refinement. These findings contribute to data-driven water quality management, enhancing understanding of nitrate behavior in interconnected water systems.

Alabama↗

USGS2025

Submarine avalanche deposits hold clues to past earthquakes

Earthquakes and other natural events sometimes shake the seafloor near coastlines severely enough to cause underwater avalanches that rush down steep slopes, scouring the seabed and carrying sediment to greater depths. These fast-moving sediment-laden flows, called turbidity currents , have at times damaged underwater infrastructure like pipelines and communications cables, as they did, for example, in snapping transatlantic cables off the coast of Newfoundland after the 1929 Grand Banks earthquake.

EOS Transactions↗

USGS2026

Digitizer Suite: The Albuquerque Seismological Laboratory Digitizer Testing Suite

Laboratory testing of digitizers and seismometers helps ensure that prior to deployment the instrumentation can produce high quality data and is operating within specifications. In this work we detail the software package called: the Albuquerque Seismological Laboratory (ASL) Digitizer Test Suite. This Java software package provides several algorithms to verify various performance parameters of digitizers commonly used for recording analog seismic instruments. The goal of these tests is not to be exhaustive, but to identify common failures that could compromise the integrity of seismic data being recorded on the digitizer. For example, Sandia National Laboratories (e.g., Slad and Merchant, 2018) routinely do comprehensive testing of digitizers for various monitoring missions. While these tests reports are valuable for comprehensively characterizing a recording system, it would be resource intensive to conduct such tests on every seismic recorder used in a network. We focus on tests that include ways to estimate the sensitivity, timing, self-noise, and clip-level of the digitizer, as well as the fidelity of the signal being recorded. The software is publicly available and provides a way for the community to verify the integrity of a digitizer using a minimum amount of outside equipment.

Seismological Research Letters↗