SEARCH · USGS Science

Results for “The Mountain Geologist”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 86Linked to original sources

USGS2025

Ubiquity and causes of soil water preferential flow across 17 ecoregions

Preferential flow (PF) in soil causes the rapid transport of water, nutrients, and contaminants into the subsurface, influencing groundwater recharge and streamflow. Data scarcity has hindered the quantification of PF occurrence and the identification of its drivers across diverse ecoregions. We address this gap by analyzing high-frequency, multi-depth soil moisture data across 17 ecoregions in the USA, using ∼1,500 sensors at 40 sites. We discovered that PF is widespread, with sites experiencing PF in up to 60% of rainfall events ≥2 mm. Multiple approaches consistently show that PF is more likely to occur with increased peak rainfall intensity, finer textured material, low soil moisture variability, humid climate, and higher net primary productivity. This suggests that PF patterns could shift with projected climate changes, increasing uncertainty in predictions of groundwater recharge, water quality, and streamflow generation.

conterminous United States and Puerto Rico↗

USGS1976

Guidelines for collection and field analysis of ground-water samples for selected unstable constituents

The unstable nature of many chemical and physical constituents in ground water requires special collection procedures and field analysis immediately after collection. This report describes the techniques and equipment commonly used in the collection and field analysis of samples for pH, temperature, carbonate, bicarbonate, specific conductance, Eh, and dissolved oxygen.

Open-File Report↗

USGS2025

Integrating marine historical ecology into management of Alaska’s Pacific cod fishery for climate readiness

The Pacific cod ( Gadus macrocephalus ) fishery was closed in 2020 after a rapid decline in biomass caused by the marine heat waves of 2014–2019. Pacific cod are exceptionally thermally sensitive and management of this fishery is now challenged by increasingly unpredictable climate conditions. Fisheries monitoring is critical for climate readiness, but short-term monitoring data may be inadequate for recognizing and anticipating change under rapid climate changes. We propose an interdisciplinary, marine historical ecology framework that looks to long-term records (local and traditional knowledge, history, archaeology, and paleoclimatology) to capture a long range of ecological variability and provide historical context for management. In order to connect to contemporary fisheries management, this framework must be built on a common vocabulary and an understanding of the key metrics used in fisheries stock assessments. Here, we propose metrics derived from Pacific cod stock assessment and synthesize information relevant to understanding the effects of past warming periods on cod populations across the Gulf of Alaska and Bering Sea. This case study provides a framework for thinking about how to use these historical records in the context of fisheries management under rapidly changing climate conditions.

Alaska↗

USGS2026

A methods framework for evaluating measurement consistency across spectrometers for multispectral uncrewed aerial system vegetation mapping applications

The U.S. Geological Survey collects remote sensing data to support national scientific assessments of natural resources, hazards, and landscape change. Spectrometers and spectroradiometers are essential for gathering point-based spectral measurements used in applications such as uncrewed aerial systems (UAS) multispectral image calibration, validation, and analysis. Evaluating how different instruments perform in laboratory and field environments helps determine whether they provide consistent, interoperable measurements. Such verification can expand access to spectral ground data during UAS operations by allowing scientists to use alternative instruments when budgets, logistics, or field conditions limit options. We propose and test a methodological framework for evaluating spectrometers for measurement consistency during UAS multispectral vegetation mapping applications. There are three central evaluation components to the framework: laboratory, field, and relative to UAS multispectral imagery. By evaluating the instruments in both relatively controlled and uncontrolled environments, we thoroughly examine measurement consistency and when/why measurements may differ. We opportunistically selected two instruments for a case study in a coastal marsh setting: a compact laboratory spectrometer we modified for field use and a field-ready spectroradiometer. The instruments produced consistent measurements in both environments. We found differences between the field spectra and UAS spectra that likely reflect the perspectives of ground vs. aerial data and indicate that further radiometric calibration may be needed.

Massachusetts↗

USGS2026

Comparative crop yield forecasting using satellite-derived biophysical and agro-climatic predictors in Sub-Saharan Africa

Timely and accurate crop yield forecasting is central to food security early warning systems, particularly in climate-vulnerable regions. While operational forecasting frameworks commonly rely on precipitation and vegetation indices such as NDVI, their ability to provide actionable lead time remains limited. Here, we evaluate the added value of satellite-derived biophysical Essential Climate Variables (ECVs): Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation (FAPAR), for forecasting millet yield in Burkina Faso (BF) and maize yield in South Africa (ZA) and Malawi (MW). Using Random Forest models, we quantify forecast skill across the growing season at both national and sub-national scales. Results show that LAI and FAPAR provide effective forecast lead times of approximately 4 months in BF, 2 months in ZA, and up to 6 months in MW relative to harvest. At peak performance, Mean Absolute Percentage Error (MAPE) reaches 19.8% (LAI) and 23.8% (FAPAR) in BF, 12.0% and 9.8% in ZA, and 21.8% and 20.8% in MW, respectively. Across countries, biophysical parameters often outperform NDVI and precipitation, particularly in arid and semi-arid regions. At the sub-national level, LAI and FAPAR enable classification of administrative units into high and moderate-skill forecast units, revealing strong spatial heterogeneity linked to crop dominance. However, forecast skill declines where the target crop is not the dominant type, highlighting an important limitation for operational deployment. Overall, the findings suggest that satellite-derived biophysical parameters can provide earlier and more spatially resolved yield signals than commonly used predictors, with potential to improve the timeliness and effectiveness of food security early warning systems.

Remote Sensing Applications: Society and Environme↗

USGS2025

Potential for continental scientific drilling to inform fault mechanics and earthquake science

Our understanding of fault mechanics and earthquake processes remains limited, largely due to minimal direct observations near active faults at seismogenic depths. This lack of data restricts our ability to accurately assess and mitigate both natural and human-induced seismic hazards. However, recent advancements in drilling capabilities and downhole sensing technologies offer an opportunity: the ability to observe the physical conditions within a volume near active fault zones. In this contribution, we highlight how scientific drilling can provide access to the near-fault environment, enabling measurements of the stress, temperature, fluid pressure, and rock properties at depths where ruptures initiate, propagate, and arrest. These observations are essential to refine models of earthquake nucleation and dynamic rupture, bridging gaps between laboratory experiments, numerical simulations, and surface observations. These insights can advance fundamental understanding in earthquake science but also support the development of more effective seismic hazard assessments and risk mitigation strategies.

Seismica↗

USGS2025

Wet meadow regeneration through restoration of biophysical feedbacks

Wet meadows are globally significant ecosystems that provide critical hydrological, ecological, and biogeochemical functions, yet their extent has declined dramatically due to land use changes and hydrologic alteration. These sedge-dominated wetlands exist at the drier end of the wetland gradient, maintained by shallow groundwater and periodic inundation. This paper is a global synthesis of the ecological, geomorphic, and hydrological dynamics of wet meadows, with an emphasis on alluvial systems, to inform effective restoration strategies. We compare wet meadows to other wetlands, classify them into palustrine, lacustrine, and alluvial types, then focus on alluvial wet meadows and discuss how their formation and persistence depend on ground and surface water interactions, sediment deposition and flow obstructions, all mediated by biological processes. In particular, we highlight the role of hydric graminoids in resisting erosion and maintaining soil cohesion, how beaver promote meadow persistence, and the significance of wet meadows as carbon sinks. We also present stratigraphic evidence demonstrating that incision, often triggered by anthropogenic activity or changing climate, is the primary mechanism of alluvial wet meadow degradation, resulting in water table decline and shifts in vegetation composition. Restoration requires reversing these incisional processes through techniques that elevate water tables, disperse flow and retain sediment—methods traditionally associated with either soil conservation or stream restoration. These include nature-based solutions that create obstructions such as beaver dams and their analogues, rock and wood-based obstructions and incision trench or gully filling and grading. Given their multifunctional value—including but not limited to flood attenuation, biodiversity support, and carbon sequestration—wet meadows warrant a focused restoration framework. This review advocates for a valley-floor scale restoration paradigm that integrates hydrological reconnection, sediment retention, and biological reinforcement to ensure long-term resilience of these systems in the face of changing climate and land use pressures.

Frontiers in Environmental Science↗

USGS2025

Determination of per- and polyfluoroalkyl substances in water by direct injection of matrix-modified centrifuge supernatant and liquid chromatography/tandem mass spectrometry with isotope dilution

A direct-injection liquid chromatography/tandem mass spectrometry method was developed to determine 34 per- and polyfluoroalkyl substances (PFAS), including selected branched isomers, in centrifuge supernatant of matrix-modified (amended with approximately 50 percent methanol) water samples. The method has been validated in reagent water, surface water, groundwater, and wastewater effluent. Other water types (for example, drinking water, untreated wastewater, and landfill leachate) have been analyzed by the method but not systematically validated. Recovery of isotope-dilution standards, added to each sample, may be used to assess method performance in nonvalidated matrices on a sample-by-sample basis. Using this method, PFAS concentrations were determined in the range of 2–2,000 nanograms per liter in water samples. This range can be extended by diluting concentrated samples. At circumneutral pH, most compounds are present in the environment in their ionized form, and data are reported as such (for example, perfluorooctanoic acid is referred to as “perfluorooctanoate” [PFOA], perfluorooctane sulfonic acid is referred to as “perfluorooctane sulfonate” [PFOS]). Sample preparation procedures were designed without the use of filtration and with minimum sample handling steps to mitigate procedural losses of target compounds due to sorption to surfaces. Further, isotope-dilution quantification allowed for the correction of bias that may result from procedural losses, matrix-induced signal suppression or enhancement, and other factors. Validation experiments to characterize bias and variability, method detection level, and holding time were done in four distinct water matrices—reagent water, surface water, treated wastewater effluent, and groundwater—at multiple concentration levels. Mean PFAS recoveries met data quality objectives of bias and variability studies in all four validation matrices except for two compounds with low and variable recovery in the reagent water matrix only. Isotope-dilution standards, treated as surrogate compounds, were analyzed in more than 1,500 customer-submitted environmental samples with aggregate recovery of 102.5±6.5 percent (mean±standard deviation). Maximum holding times for all target compounds in the four validation matrices were 28 days for refrigerated samples and 90 days for frozen samples.

Techniques and Methods↗

USGS2026

Global pegmatite-hosted lithium, cesium, and rubidium resources: A dataset for grade and tonnage modeling

Quantitative mineral resource assessments of potential undiscovered deposits can inform future mineral supply scenarios, but their accuracy is conditional on building robust grade and tonnage models of known deposits. This study presents an up-to-date global compilation and analysis of recently discovered and original, in-situ pegmatite-hosted Li, Cs, and Rb resources prior to historic production. Our analysis yields a median tonnage of 21.2 million tons (Mt) and grade of 1.12% Li 2 O, respectively, for global Li pegmatite deposits ( n = 73). The grades and tonnages of Li pegmatite resources vary depending on the age of the bedrock host domain, pegmatite crystallization age, and primary ore mineralogy. Lithium pegmatite resources hosted in Archean to transitional Archean-Paleoproterozoic domains have the largest median tonnage (29.8 Mt; n = 38), and those hosted in Paleoproterozoic to Mesoproterozoic domains have smaller median tonnages (6.5 Mt; n = 16). Cesium deposits where pollucite is the primary ore mineral have a bimodal grade distribution, with modes of 2.40 and 0.035 wt% Cs 2 O for high- and low-grade deposits, respectively, while Rb deposits are more unimodal with a median grade of 0.247 wt% Rb 2 O. Pegmatite-hosted Cs and Rb resources have median tonnages of 7.6 and 6.3 Mt, respectively. Covariation between ore mineralogy and the degree of crustal enrichment in pegmatite-hosted deposits is diagnostic of petrogenetic differences, including melt source characteristics, magma evolution, or variable degrees of volatile solubility. The Li pegmatite compilation is suitable for fitting robust numerical models to support quantitative assessments. More well-defined Rb and Cs pegmatite resources are required for quantitative assessments, but these data provide useful information about original in-place resources for framing supply discussions.

Ore Geology Reviews↗

USGS2026

Tracking baseflow supply dynamics using SWOT data from small groundwater-dominated lakes

In situ surface-water monitoring strategies are biased towards larger perennial streams and lakes and are generally not designed to track mechanisms of baseflow supply contributed by the dynamic storage of aquifers. Additionally, small (< 1 km 2 ) groundwater-influenced lakes and wetlands globally have little in situ monitoring infrastructure. We explored the utility of remotely sensed Surface Water Ocean Topography Satellite (SWOT) data, collected from 2023 onward, to characterise the seasonal and multi-year water-level trends of groundwater flow-through kettle lakes distributed across the permeable sediments of eastern Massachusetts, USA. This analysis indicated that water levels for kettle lakes with areas down to approximately 0.05 km 2 are resolvable in the study area. Our examination of 17 kettle lakes found that SWOT water-surface elevation data closely tracked groundwater levels in adjacent monitoring wells where available, including the timing of seasonal patterns (highest levels generally in late spring), although there was some variation between years and there was a substantial lag in the timing of high water levels for a lake located downgradient from a 30-m-thick vadose zone. Furthermore, SWOT-observed water-level increases in kettle lakes tracked with baseflow increases in two adjacent groundwater-dominated streams, as would be expected from increased hydraulic gradients. Unlike spectral remote sensing, SWOT data are generally not affected by cloud cover, resulting in a potential for groundwater-dominated lakes to be sentinels of dynamic storage patterns, including identification of baseflow drought lags, which are currently ill-defined hydrological processes. SWOT monitoring of groundwater-influenced surface waters shows potential for augmenting existing monitoring wells and streamgages as continuous monitors of groundwater levels and baseflow supply in permeable terrain.

Massachusetts↗

USGS1999

Effects of snowmobile use on snowpack chemistry in Yellowstone National Park, 1998

Snowmobile use in Yellowstone National Park has increased substantially in the past three decades. In areas of greatest snowmobile use, elevated levels of by-products of gasoline combustion such as ammonium and benzene have been detected in snowpack samples. Annual snowpacks and snow-covered roadways trap deposition from local and regional atmospheric emissions. Snowpack samples representing most of the winter precipitation were collected at about the time of maximum annual snow accumulation at a variety of locations in the park to observe effects of a range of snowmobile traffic levels. Concentrations of organic and inorganic compounds in snow samples from pairs of sites located directly in and off snow-packed roadways used by snowmobiles were compared to concentrations in samples collected at nearby off-road sites. Concentrations of ammonium were 2 to 5 times higher for the in-road snow compared to off-road snow for each pair of sites. Thus, concentrations decreased rapidly with distance from roadways. In addition, concentrations of ammonium, nitrate, sulfate, benzene, and toluene in snow were positively correlated with snowmobile use.

Wyoming↗

USGS2025

World minerals outlook—Cobalt, gallium, helium, lithium, magnesium, palladium, platinum, and titanium through 2029

Given the rapid expansion in the demand for mineral commodities that underpin worldwide economic growth and technological advancement, information regarding expected country-level mine production and production capacity is becoming increasingly important to industry stakeholders, end users, and policymakers. Production capacity can limit future supply, depending on how rapidly that capacity is able to expand. Current capacity can be evaluated on the basis of past production. Decreases to future capacity can be taken into account from announcements of planned shutdowns of mines or processing facilities, which are frequently publicized well in advance of such closures. Likewise, capacity expansions, which usually involve multiple stages—such as permitting, financing, and construction (all of which take time)—can also be estimated. As such, it is possible to evaluate midterm future capacity based on estimates of today’s capacities along with consideration of future investment plans. This World Minerals Outlook provides estimated capacities for cobalt, gallium, helium, lithium, magnesium, palladium, platinum, and titanium for 2025 through 2029. The results of this analysis indicate that two mineral commodities important to the manufacture of lithium-ion batteries—cobalt and lithium—are expected to have large capacity growth in the next few years, likely owing to expectations for increased demand for these batteries. For gallium, helium, palladium, and platinum, capacity is expected to remain stable or exhibit moderate growth. Still, these expected capacity levels are higher than current production, allowing for future production growth. The production capacity outlook is opaque for magnesium and titanium metal, which have a significant fraction of current production in nonmarket economies, such as China and Russia. Ultimately, though, where free market conditions prevail, full utilization of capacity potential for those commodities is likely to depend on supply deficits and prices that are above production costs.

Scientific Investigations Report↗

USGS2026

Variable pH habitats could help prepare stone crabs for coastal acidification

Coastal acidification is being exacerbated by terrestrial organic inputs, especially after high precipitation events. Florida’s rainy season coincides with stone crab ( Menippe mercenaria) reproduction, and pH extremes could limit future harvests by reducing reproductive output. Populations that experience pH variability can serve as “natural laboratories” for estimating the tolerance of a species to coastal acidification. Here, we conducted a series of experiments to determine if ovigerous stone crabs conditioned in more variable pH habitats (seagrass) would result in faster embryonic development, greater hatching success, and higher larval survival relative to crabs conditioned in habitats with lower pH variability (sandy habitats). After field conditioning, crabs were transported to the laboratory and randomly acclimated to either a control pH (pH = ~ 7.90) or a reduced pH condition (pH = ~ 7.60) until larval release. The rate of embryo development was slower in the laboratory reduced pH treatment, however, there were no observable field condition effects on embryo development rate. Crabs conditioned in the more pH variable seagrass habitat did have greater hatching success and higher larval survival than crabs in less pH variable sandy habitats; however, larval survival was low across all treatments. These results suggest that the pH variability experienced in seagrass habitats during brooding may serve as a mechanism for stone crabs to acclimatize to extremes in seawater pH.

Marine Biology↗

USGS2025

Factors influencing landslide occurrence in low-relief formerly glaciated landscapes: Landslide inventory and susceptibility analysis in Minnesota, USA

In landscapes recently impacted by continental glaciation, landslides may occur where topographic relief has been generated by the drainage of glacial lakes and ensuing post-glacial fluvial network development into unconsolidated glacially derived sediments and exhumed bedrock. To investigate linkages among environmental variables, post-glacial landscape development, and landslides, we created a landslide inventory of nearly 10,000 landslides in five regions of the formerly glaciated low-relief state of Minnesota, USA. Multivariate logistic regression indicates the importance of slope angle, lithology, and the development of stream valleys to landslide distribution. Areas underlain by fine-grained glaciolacustrine and nearshore deposits that are incised by streams are particularly prone to shallow (<1-2 m depth) landslides. Landslides also occur in a wide range of glacial and fluvial deposits, and as rockfall in layered Paleozoic sedimentary rocks in central and southern Minnesota and Precambrian igneous and sedimentary rocks in northeastern Minnesota. Although no more than 1-2% of the studied regions are susceptible to landslides, they can pose risk to life and safety, damage infrastructure, and impact water quality. The combination of recently generated low-relief steep slopes, extensive unconsolidated sediments, and layered sedimentary bedrock make this formerly glaciated landscape more susceptible to landslides than current national-scale models indicate.

Minnesota↗

USGS2025

Re-Os geochronology of molybdenite by LA-ICP-MS/MS

Re-Os geochronology is a powerful tool to directly date sulphide mineralisation using phases such as molybdenite, pyrite and chalcopyrite. We present a snapshot of a method in development utilizing laser ablation inductively coupled-plasma ‘triple quad’ mass spectrometry (LA-ICP-MS/MS) for Re-Os geochronology of molybdenite. While traditional LA-(MC)-ICP-MS measurements are limited by the >90% isobaric interference correction of parent radioactive 187 Re on radiogenic daughter 187 Os, the MS/MS technology minimizes this correction through careful instrument tuning and use of a (CH 4 + H 2 + He) reaction gas mixture to mass shift 187 Os away from 187 Re. We demonstrate the potential of the MS/MS technique by presenting robust Re-Os dates for three different molybdenite samples ranging in age from ~28 to 1520 Ma.

Conference Paper↗

USGS2026

A targeted approach for mapping groundwater discharge to surface water and fish thermal refuge in four Lake Ontario tributaries

The duration, magnitude, and frequency of heatwaves are predicted to increase in the coming decades, a combination that can reduce the survival of many fish species. Across the world, there is broad interest in identifying thermal refuge for heat-intolerant fish species and exploring opportunities to enhance or protect these areas. Because deeper groundwater maintains a relatively constant temperature, groundwater-influenced areas along streams can provide cool-water refuge for fish during periods of extreme heat. A targeted approach was developed for identifying existing cold-water zones and areas of substantial groundwater discharge in four high priority Lake Ontario tributaries. Our approach included: (1) predicting where groundwater discharge is most likely with a simple geospatial model and (2) using model predictions to select field sites for intensive high-resolution study, including ground-based mapping of groundwater features (springs, seeps, tributaries) as well as drone-based optical and thermal infrared surveys. Results from field sites were used to both verify model performance and map different types and aerial extents of thermal anomalies. Geospatial modelling successfully predicted regions of widespread groundwater upwelling, later verified and mapped by field and drone surveys. Comparison of model and field survey results further highlighted specific geospatial layers, such as soil/bedrock types and topographic wetness index, as being particularly useful for predicting groundwater influence on streams in the study area. In addition, a comparison of geospatial model results with a model of fish abundances along the studied streams showed significant positive correlations for many heat-intolerant fish species over a wide geographic area. The approach developed in this study can be applied to other watersheds to highlight areas of probable groundwater discharge and could be used by fishery and water resource managers to support cold-water fish habitat management decision-making and resource conservation.

New York↗

USGS2025

Paleoseismology and paleogeodesy using coral microatolls

Establishing the rupture extent and slip distribution of individual paleo-earthquakes is vital for assessing fault behavior including the persistence of rupture segmentation, recurrence patterns, and similarity of successive events, key issues in both fault mechanics and hazard assessment. Techniques with high temporal and geodetic precision as well as a wide distribution of study sites are necessary to investigate past earthquakes in such detail. Coral microatoll growth is one of the best types of geologic record for paleoseismology and paleogeodesy given these needs, as it provides long, continuous, widely distributed records of centimeter-scale vertical tectonic motion with potentially annual-level temporal precision. This chapter describes the process of interpreting microatoll growth records to obtain time series of relative sea level, tectonic vertical deformation fields, and finally slip and coupling parameters on an underlying fault interface.

Book chapter↗

USGS2024

Framework for mapping liquefaction hazard–Targeted design ground motions

Liquefaction-induced ground failure poses substantial challenges to geotechnical earthquake engineering design. Current approaches for designing against liquefaction hazards, as specified in most seismic provisions, focus on estimating a liquefaction factor of safety ( 𝐹⁢𝑆𝐿 ) and typically characterize earthquake loading using design parameters based on probabilistic or deterministic ground motion levels. Because 𝐹⁢𝑆𝐿 is estimated deterministically, this basis of design neglects considerable uncertainties for estimating liquefaction triggering and its consequences and results in a lack of liquefaction-specific design criteria, particularly as structural design has advanced toward risk-targeted performance objectives. This study presents a framework for developing liquefaction-targeted design criteria based on a minimum acceptable return period of liquefaction, informed by probabilistic liquefaction hazard analysis (PLHA). PLHA quantifies annualized rates of liquefaction by considering contributions from (1) the full ground-motion probability space, and (2) uncertainties in liquefaction triggering using probabilistic models. PLHA is used in this study to characterize the current, effective return periods of 𝐹⁢𝑆𝐿 ( 𝑇𝑅,𝐹⁢𝑆 ) obtained from conventional liquefaction hazard analysis (CLHA) using uniform-hazard ground motions. 𝑇𝑅,𝐹⁢𝑆 is evaluated in a parametric study of nearly 100 sites throughout the conterminous United States. The results indicate large geographic variations in acceptable liquefaction hazard levels, with implied 𝑇𝑅,𝐹⁢𝑆 ranging between approximately 1,000 to 3,000 years. To address these inconsistencies without the computational demands of full PLHA, a framework is proposed for developing a liquefaction-targeted design peak ground acceleration, 𝑃⁢𝐺⁢𝐴𝐿 , for use in liquefaction models that result in consistent liquefaction design levels across all geographic locations. The mapped 𝑃⁢𝐺⁢𝐴𝐿 is shown to be somewhat sensitive to site-specific properties, and adjustment factors are developed and presented. The proposed 𝑃⁢𝐺⁢𝐴𝐿 mapping procedure produces 𝐹⁢𝑆𝐿 estimates that are consistent with those obtained from full PLHA at a target 𝑇𝑅,𝐹⁢𝑆 , providing a promising roadmap to incorporating PLHA concepts into current liquefaction design methods.

Journal of Geotechnical and Geoenvironmental Engin↗