SEARCH · USGS Science

Results for “Sensors”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86Linked to original sources

USGS2017

Response of currents and water quality to changes in dam operations in Hoover Reservoir, Columbus, Ohio, August 24–28, 2015

Hoover Reservoir, an important drinking water supply for the City of Columbus, Ohio, has been the source of a series of taste and odor problems in treated drinking water during the past few years. These taste and odor problems were caused by the compounds geosmin and 2-methylisoborneol, which are thought to have been related to cyanobacteria blooms. In an effort to reduce the phosphorus available for cyanobacteria blooms at fall turnover, the City of Columbus began experimenting with the dam’s selective withdrawal system to remove excess phosphorus in the hypolimnion, which is released from bottom sediments during summer anoxic conditions. The U.S. Geological Survey completed two synoptic survey campaigns to assess distributions of water quality and water velocity in the lower part of Hoover Reservoir to provide information on the changes to reservoir dynamics caused by changing dam operations. One campaign (campaign 1) was done while water was being withdrawn from the reservoir through the dam’s middle gate and the other (campaign 2) while water was being withdrawn through the dam’s lower gate. Velocities were measured using an acoustic Doppler current profiler, and water-quality parameters were measured using an autonomous underwater vehicle equipped with water-quality sensors. Along with the water-quality and water-velocity data, meteorological, inflow and outflow discharges, and independent water-quality data were compiled to monitor changes in other parameters that affect reservoir behavior. Monthly nutrient data, collected by the City of Columbus, were also analyzed for trends in concentration during periods of expected stratification. Based on the results of the two campaigns, when compared to withdrawing water through the middle gate, withdrawing water through the lower gate seemed to increase shear-driven mixing across the thermocline, which resulted in an increase in the depth of the epilimnion throughout the lower part of Hoover Reservoir. The observations from this study, if repeatable and driven primarily by changes in gate operations, can inform nutrient management strategies for Hoover Reservoir. Increased mixing across the thermocline may potentially supply nutrients from the hypolimnion to algae in the epilimnion. Although operation of the lower gate has the potential to export nutrients from the hypolimnion (where the concentrations of nutrients have typically been higher during summer months) through two mechanisms (direct withdrawal and mixing into the epilimnion), supply of nutrients to the epilimnion through enhanced mixing could lead to a short-term increase in algal populations. Therefore, further study is recommended to (1) test the repeatability of the results of gate changes on water-quality distributions and circulation patterns in lower Hoover Reservoir, (2) identify the immediate effect of gate changes on nutrient concentrations in the water column, and (3) identify the best management practices to reduce the nutrient storage in the hypolimnion of Hoover Reservoir without increasing the potential for nutrient transport to the highly productive epilimnion.

Ohio↗

USGS2018

Hydraulic modeling and flood-inundation mapping for the Huron River and Ore Lake Tributary, Livingston County, Michigan

Digital flood-inundation maps for an 8-mile (mi) reach of the Huron River near Hamburg, Michigan (station number 04172000), from downstream of Rickett Road to Strawberry Lake, were created by the U.S. Geological Survey (USGS), in cooperation with Green Oak and Hamburg Townships, Michigan, and the U.S. Army Corps of Engineers. The flood-inundation maps also include a 1.16-mi reach of the Ore Lake Tributary until it joins the Huron River, approximately 2.22 mi downstream of Rickett Road. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Huron River near Hamburg, Michigan (station number 04172000). Near real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/ . The NWS Advanced Hydrologic Prediction Service also provides forecasted flood hydrographs at this website. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the current stage-discharge relation at the Huron River near Hamburg, Mich., streamgage and was calibrated to water levels determined with stage sensors (pressure transducers) temporarily deployed along the stream reach. The hydraulic model was used to compute a set of water-surface profiles for flood stages ranging from 7.0 to 10.5 feet (ft). This range represents stages just above 6.0 (bankfull) to 2.04 ft above the maximum recorded stage at the USGS streamgage on the Huron River near Hamburg, Mich. (station number 04172000). The computed water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from light detection and ranging [lidar] data having a 0.49-ft vertical accuracy and 3.8-ft horizontal resolution) to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information critical for flood-response activities such as evacuations, road closures, and postflood recovery efforts.

Michigan↗

USGS2018

Geochemistry and microbiology of groundwater and solids from extraction and monitoring wells and their relation to well efficiency at a Federally operated confined disposal facility, East Chicago, Indiana

In cooperation with the U.S. Army Corps of Engineers, Chicago District, the U.S. Geological Survey investigated the processes affecting water quality, geochemistry, and microbiology in representative extraction and monitoring wells at a confined disposal facility (CDF) in East Chicago, Indiana. The CDF is a 140-acre Federally-managed facility that was the former location of an oil refinery and is now used for the long-term disposal and storage of dredge material from the Indiana Harbor and Indiana Harbor Canal. Residual petroleum hydrocarbons and leachate from the CDF are contained within the facility by use of a groundwater cutoff wall. The wall consists of a soil-bentonite slurry and a gradient control system made up of an automated network of 96 extraction wells, 42 monitoring wells, and 2 ultrasonic sensors that maintain an inward hydraulic gradient at the site. The pumps in the extraction wells require vigilant maintenance and must be replaced when unable to withdraw water at a rate sufficient to maintain the required inward gradient. The wells are screened in the Calumet aquifer, a coarse-grained sand and gravel unit that extends approximately 35 feet below the land surface and is not utilized for drinking-water supply at the CDF or in the surrounding area. This study was initiated to identify the cause of decreased pump discharges and to identify potential mitigation strategies. For this study, the U.S. Geological Survey collected groundwater and solids from monitoring and extraction wells. Groundwater samples were collected during June 2014 for precautionary health screening and on four occasions during September 2014 through November 2014. Groundwater samples collected from two extraction wells during June 2014 were analyzed for concentrations of anthropogenic organic constituents. During September through November 2014, groundwater samples were collected from one additional extraction well, and samples from three monitoring wells were analyzed for concentrations of inorganic and organic constituents, dissolved gases, and bacterial abundance and diversity. Solid samples were collected during April 2014, during September 2014 through November 2014, and during November 2016. Solid samples were collected from the exterior of extraction-well pumps and as flocculent from water samples. Solid samples were collected from 10 wells, including 1 extraction well and 3 monitoring wells sampled for water quality. Solid samples were analyzed for mineralogy, solid-phase habit, geochemistry, and organic composition. The following is a list of observations that were made during this study: (1) the water quality is substantially variable among the six well locations sampled as part of this study—lower (more negative) redox values and higher concentrations of many constituents (including calcium, magnesium, sodium, and sulfate) and properties (including dissolved solids, hardness, and turbidity) were detected in sampled wells located near the extraction wells with the highest frequency of failure; (2) water-level drawdown is variable between extraction wells—wells with the greatest drawdown may pull deeper groundwater into the borehole; (3) dissolved gas results indicate reducing oxidation-reduction processes in the aquifer material that can feasibly contribute iron, carbon dioxide, and other byproducts from hydrocarbon degradation to precipitates and solids that accumulate on and impair pump operation; (4) crystalline and amorphous solid-phase minerals are precipitating in the borehole; (5) several types of bacteria are present in water pumped from extraction wells and are likely responsible for bonding mineral and microbiologic matter to the pump (and other well components); and (6) bacteria may create microenvironments that facilitate precipitation of solids or inhibit dissolution of unstable minerals once the bacteria adhere to biofilm attached to the pump. Results of the study indicate that bacteria may be accumulating and entrapping solid material on the exterior of pumps. This accumulation reduces heat transfer and water discharge from the pump and may lead to decreased efficiency or mechanical failure. Observations could not be made on the well screen, gravel pack, or surrounding geologic formation; therefore, mitigating measures in the borehole may not solve well-productivity issues. Remedies for the pump fouling problems were derived from the review and interpretation of data collected during this study and from information documented in other sources about groundwater well fouling. Potential remedies to problems associated with pump fouling at the CDF may include the following: (1) reducing attractiveness of the extraction wells for microbiological growth by modifying the chemical or physical environment of the well, (2) modifying the pump exterior to decrease microbiological adherence, (3) changing the pumping regime to control the chemistry of water entering the well from the surrounding aquifer material, (4) modifying the pumps to be less physically and thermally attractive, and (5) removing hydrocarbons from groundwater and the aquifer material surrounding the wells or adding surfactants to make them more mobile. Pilot scale testing may be necessary to identify the most effective treatment or combination of treatments.

Indiana↗

USGS2019

Spatial and temporal variability of harmful algal blooms in Milford Lake, Kansas, May through November 2016

The U.S. Geological Survey, in cooperation with the Kansas Department of Health and Environment (KDHE), completed a study to quantify the spatial and temporal variability of cyanobacterial blooms in Milford Lake, Kansas, over a range of environmental conditions at various time scales (hours to months). A better understanding of the spatial and temporal variability of cyanobacteria and microcystin will inform sampling and management strategies for Milford Lake and for other lakes with cyanobacterial harmful algal bloom (CyanoHAB) issues throughout the Nation. Spatial and temporal variability were assessed in the upstream one-third of Milford Lake (designated as “Zone C” by KDHE) during May through November 2016 using a combination of time-lapse photography, continuous water-quality monitors, discrete phytoplankton, chlorophyll, and microcystin samples, and spatially dense near-surface data. Combined, these data were used to characterize variability of cyanobacterial abundance, algal biomass, and microcystin concentrations in Zone C of Milford Lake before, during, and after cyanobacterial blooms in 2016. Temporal patterns were evaluated during May through November 2016 using time-lapse photography at six locations in Zone C and at a single point location (the Wakefield site) using a combination of discrete and continuously measured water-quality data (including the cyanobacterial pigment phycocyanin). Based on time-lapse photography, CyanoHABs developed in Zone C of Milford Lake in early July and persisted through the end of November. Bloom accumulations at individual sites were dependent on wind direction. After a change in wind direction, it would take about 1 day for accumulations to become visible at different locations. During periods with low wind, accumulations were widespread and visible at all sites. Cyanobacteria were absent from the algal community at the Wakefield site in late May and were a minor component of the community in June; however, by mid-July the cyanobacteria were dominant and remained dominant until early November. Chlorophyll and microcystin concentrations at the Wakefield site were estimated using sensor-measured phycocyanin based on regression models developed for Zone C. Regression-estimated concentrations likely are more indicative of seasonal patterns in algal biomass (as indicated by chlorophyll concentrations) and microcystin than discretely collected samples because regression-estimated data have a much higher temporal resolution. Based on regression estimates, algal biomass and microcystin concentrations at the Wakefield site steadily increased from May through August. After August, concentrations decreased but remained relatively high compared to May and June. Daily chlorophyll maxima were as much as 400 times higher than daily minima, and daily microcystin maxima were as many as several orders of magnitude higher than daily minima. The extreme variability in algal biomass and microcystin concentrations at the Wakefield site reflects the development and dissipation of blooms, as indicated by the time-lapse cameras. Based on regression-estimated microcystin concentrations, the KDHE watch and warning thresholds for microcystin were exceeded during mid-June through late November. Exceedance of KDHE advisory thresholds often changed from no advisory to watch or warning over the course of the day because of the variability in algal biomass and microcystin concentrations caused by bloom development and dissipation. Continuous water-quality monitors may be useful in informing public-health decisions in lakes with variable CyanoHAB conditions; however, site-specific models need to be developed, and best practices for using continuous water-quality monitors to inform CyanoHAB management strategies need to be established. Spatial data were collected on May 26, July 21, and September 15, 2016, using a combination of a boat-mounted array and discrete water-quality samples analyzed for phytoplankton community composition and chlorophyll and microcystin concentrations. Spatial patterns were described using regression-estimated chlorophyll and microcystin concentrations. During the May 26, 2016, spatial surveys, cyanobacterial abundances were relatively low throughout Zone C and did not exceed KDHE guidance values compared to spatial surveys on July 21 and September 15. Regression-estimated chlorophyll concentrations were indicative of higher algal biomass uplake in Zone C, and decreases in the downlake direction towards Zone B. Regression-estimated chlorophyll concentrations also were more variable uplake than downlake. Based on regression estimates, microcystin concentrations did not exceed KDHE guidance values anywhere in Zone C on May 26. Spatial patterns in microcystin throughout Zone C did not match patterns in regression-estimated chlorophyll concentrations, likely because the algal community was not dominated by cyanobacteria at most locations in May. During the July 21, 2016, spatial surveys, cyanobacterial abundances in Zone C exceeded KDHE guidance values in 50 percent of samples. The algal community in Zone C was dominated by cyanobacteria at all locations except two, where cyanobacteria codominated with diatoms. Both locations where cyanobacteria and diatoms codominated were north of the causeway. Regression-estimated chlorophyll concentrations were indicative of higher algal biomass north of the causeway and on the eastern shore of Zone C. On July 21, algal biomass did not always decrease in the downlake direction. There was a decrease just south of the causeway but an increase shortly after with higher concentrations into Zone B. Spatial maps indicated changes in algal distribution at a 0.5-meter depth, with algae moving to the central part of the lake north of the causeway and along the eastern shore south of the causeway. Most regression-estimated microcystin concentrations on July 21 exceeded KDHE guidance values, reflecting the pervasive bloom conditions in Zone C during this period. Spatial patterns in regression-estimated microcystin concentrations throughout Zone C were similar to patterns seen in discrete samples and regression-estimated chlorophyll concentrations, with higher concentrations north of the causeway and on the east shore of Zone C. During the September 15, 2016, spatial surveys, cyanobacterial abundances did not exceed KDHE guidance values. The algal community north of the causeway was dominated by diatoms. The algal community throughout the rest of Zone C was dominated by cyanobacteria. Of regression-estimated microcystin concentrations on September 15, 80 percent did not exceed KDHE guidance values. Spatial patterns indicated northward movement of the cyanobacterial bloom consistent with a wind shift noted the previous day. On September 14, winds were generally from the north to northwest, shifting to the south by September 15. There was a northward progression of chlorophyll and microcystin during the spatial surveys. These data, along with the camera data and spatial and wind data from May and July, indicate that wind can be a major driver of the spatial and temporal variability of cyanobacterial blooms in Milford Lake and likely plays a role in the extent and duration of near-shore accumulations.

Kansas↗

USGS2019

An evaluation of methods for computing annual water-quality loads

The U.S. Geological Survey publishes information on the mass, or load, of water-quality constituents transported through rivers and streams sampled as part of the operation of the National Water Quality Network (NWQN). This study evaluates methods for computing annual water-quality loads, specifically with respect to procedures currently (2019) used at sites in the NWQN. Near-daily datasets of chloride, total nitrogen, nitrate plus nitrite, total phosphorus, and suspended sediment were subset to determine the accuracy of various load-estimation methods, including linear interpolation, ratio estimators, and linear and weighted-regression methods. Water-quality loads are computed under different sampling strategies and at multiple sampling sites to provide a more complete evaluation of load-estimation methods. Estimation methods were less accurate when computing loads at annual rather than decadal time steps. Depending on the water-quality constituent, annual loads were within comparable accuracy thresholds 21 to 64 percent of the time relative to decadal loads. The accuracy of annual load estimates varied among water-quality constituents, sampling strategies, sampling sites, and estimation methods. Methods were most accurate when estimating chloride and decreased in accuracy when estimating total nitrogen, nitrate plus nitrite, total phosphorus, and suspended-sediment loads. Estimation methods were most likely to compute accurate annual loads when samples were collected frequently (26 samples per year) and when sampling strategies targeted high-flow conditions. For a given water-quality constituent, estimation accuracy differed substantially among sampling sites; estimates were more likely to be accurate at large rivers with less variability in concentration and (or) discharge conditions and were less likely to be accurate at smaller stream sites with more variable streamflow and (or) water-quality concentrations. The Weighted Regressions on Time, Discharge, and Season method with Kalman filtering (WRTDS_K) generally produced the most accurate annual load estimates among sampling sites and water-quality constituents. Although WRTDS_K was the most accurate generally, every estimation method evaluated had the potential to produce accurate (and inaccurate) load estimates depending on the site, constituent, and water year. Linear interpolation and ratio estimators that used samples exclusively from the year being estimated were among the best performing methods for total nitrogen and nitrate plus nitrite loads but were among the least accurate when estimating annual total phosphorus and suspended-sediment loads. Ratio estimation that considered samples from previous years and stratified based on streamflow conditions produced among the most accurate total phosphorus estimates but was among the least accurate for other constituents. Regression-based methods that assumed linear or quadratic relations among the logarithm of water-quality concentrations and streamflow conditions were among the least accurate methods generally, whereas regression-based methods that considered cubic relations among the logarithm of concentration and streamflow and the Weighted Regressions on Time, Discharge, and Season (WRTDS) method were typically more accurate. Methods that adjusted daily estimates computed from regression or weighted-regression methods based on departures from sampled values, such as WRTDS_K and the composite method, improved estimate accuracy for most sites and constituents, but especially for chloride, total nitrogen, nitrate plus nitrite, and suspended-sediment estimates. Investigation of the underlying causes of estimation method bias indicated that sites and years with more variability in concentration and loading conditions, higher slopes in the relation of the logarithm of concentration and discharge, and sampling plans that underrepresented high-flow conditions generally led to less accurate load estimates. Finally, because all methods indicated the capacity to produce biased load estimates, additional work is needed to identify the capacity of new technologies, such as continuous water-quality sensors, to improve the accuracy of annual or shorter term load estimates. Based on findings in this report, the NWQN will continue to publish water-quality loads using LOADEST-based methods that consider multiple transformations of streamflow, as well as season, time, and variables indicative of historical streamflow conditions to maintain consistent methods for stakeholders. However, the NWQN also plans to begin publishing annual load estimates using the WRTDS_K method in 2020 because this method was determined to be the most accurate for a given site, constituent, and water year.

Scientific Investigations Report↗

USGS2019

Estimating sediment flux to Jamaica Bay, New York

Tidal wetland loss in Jamaica Bay, New York, is well documented. Maintaining wetlands is important from an environmental and ecological perspective and because wetlands buffer coastal communities from storm damage. An estimate of suspended-sediment flux through Rockaway Inlet is needed to improve understanding of sediment dynamics in Jamaica Bay and could be used in salt marsh restoration efforts. To estimate sediment flux, an index-velocity station and turbidity sensor were installed and operated in Rockaway Inlet near the mouth of Jamaica Bay from November 2014 to December 2016 and point and cross-sectional suspended-sediment samples were collected and analyzed. Index-velocity data coupled with cross-sectional acoustic Doppler current profiler measurements were used to develop an index-velocity rating. A simple linear regression rating with a strong coefficient of determination (R 2 of 0.981) was developed. Discharge was computed from the stage-area and index-velocity relations, and a low-pass Godin filter was used to remove the tidal aliasing. A second simple linear regression (R 2 of 0.75) between fixed-point suspended-sediment concentration (SSC) samples and turbidity allowed for the calculation of SSC through Rockaway Inlet, and then sediment flux was found by multiplying SSC and discharge for continuous (6-minute) data. Turbidity values were low in the near-ocean conditions at Rockaway Inlet, with daily means ranging from 0.6 to 8.2 formazin nephelometric units during the period of November 2014 through December 2016. During this time, computed daily mean suspended-sediment concentrations ranged from 3 to 13 milligrams per liter. High sediment loads generally occurred during incoming tides, during both storm and nonstorm conditions, suggesting a net inward sediment flux into Jamaica Bay. The fate of sediment after it enters Jamaica Bay was not investigated. Trends in sediment flux during major storms could not be evaluated because no major storms occurred during this investigation.

New York↗

USGS2020

A summary of water-quality monitoring in San Francisco Bay in water year 2017

This report summarizes the activities of the U.S. Geological Survey (USGS) San Francisco Bay Water-Quality Monitoring and Sediment Transport Project during water year 2017, including an explanation of methods employed, stations operated, and a graphical summary of data for the period of record for stations operational in water year 2017. In cooperation with partner agencies, the USGS maintains a network of sensors that continuously and autonomously measures water-quality parameters in San Francisco Bay including water temperature, specific conductance, turbidity, and suspended-sediment concentration. Data are collected at several locations in the estuary by a network of water-quality sondes sampled at 15-minute intervals. Methods of data collection are presented along with documentation of the regression models utilized to estimate suspended-sediment concentration from observed turbidity, a commonly utilized surrogate to estimate suspended-sediment concentration. The goals of the data collection effort are to (1) obtain long-term, high-frequency, and high-quality data to describe San Francisco Bay water quality; (2) make the data publicly available on the USGS National Water Information System data portal; and (3) help improve understanding of the spatial and temporal variability of water quality in the estuary, informing management decisions regarding restoration, water supply, navigation, and ecology.

California↗

USGS2021

Assessment of water-quality constituents monitored for total maximum daily loads in Johnson County, Kansas, January 2015 through December 2018

Stormwater discharges from municipalities are regulated by provisions in the Clean Water Act of 1972 to protect the Nation’s water resources from harmful pollutants. In 2014, the Kansas Department of Health and Environment issued new stormwater discharge permits for 17 municipalities in Johnson County, Kansas, in the northeastern part of the State. The county is largely suburban and has 20 municipalities within 22 watersheds. Municipalities in Johnson County are required to implement stormwater management programs that reduce discharges of pollutants, protect water quality, and satisfy applicable water-quality regulations. In 2015, the U.S. Geological Survey, in cooperation with the Johnson County Stormwater Management Program, began a 4-year monitoring program designed to meet new stormwater monitoring requirements for some municipalities in Johnson County. Additional data were collected to evaluate the usefulness of continuous water-quality monitoring and different sampling methods in assessing changes in water quality. Twelve of the 22 watersheds in the county were within the sampling network for this project. Discrete water-quality samples were collected at 25 stream sites and 2 lake sites using passive, grab, and equal-width increment sampling methods. Samples at all sites were analyzed for nutrients, Escherichia coli bacteria, total suspended solids, and suspended-sediment concentration. Ninety-nine percent of storm-event samples and 98 percent of low-flow samples were less than the Kansas Surface Water Quality Standard for nitrate plus nitrite. Eight percent of storm-event samples and 100 percent of low-flow samples were less than the total suspended solids screening value of 50 milligrams per liter. Passive samples generally had higher concentrations when compared to equal-width increment and grab samples, and grab samples and equal-width increment samples generally had similar concentrations. Continuous water-quality data were collected at one site. Ordinary least squares regression analysis was used to relate continuous (15-minute) water-quality sensor measurements to discretely sampled constituent concentrations at one site. Numerous factors affect water quality in urban runoff. Urban areas have many possible contaminant sources, including municipal and industrial wastewater discharges, stormwater runoff from impervious surfaces, and failing infrastructure. A better understanding of these factors can inform future monitoring efforts, leading to datasets that are representative of storm runoff and can be used to detect differences between sites and over time.

Kansas↗

USGS2021

Estimation of dissolved-solids concentrations using continuous water-quality monitoring and regression models at four sites in the Yuma area, Arizona and California, January 2017 through March 2019

Multiple linear regression models were developed to estimate dissolved-solids concentrations in water at four sites in the Yuma area between Imperial Dam, Arizona and California and the southerly international boundary with Mexico at San Luis, Arizona. Continuous and discrete water-quality data were collected at gaging stations in the Colorado River upstream from Imperial Dam, Arizona-California, the Colorado River below Cooper wasteway near Yuma, Arizona, the Yuma Main Drain above Arizona–Sonora, Mexico boundary, and the 242 lateral above Main Drain at the Arizona–Sonora boundary. Continuous specific conductance and water temperature data were collected at each site between January 2017 and March 2019. Bi-weekly to monthly dissolved-solids water samples were collected during the same period. Continuous specific conductance data collected at the Colorado River below Cooper wasteway were affected by poorly mixed streamflow during periods when the Pilot Knob Hydro-electric Plant was releasing water to the river. The continuous specific conductance data for the site downstream from Cooper wasteway were corrected using mean specific conductance values computed from cross-section measurements collected during site visits. Continuous specific conductance data were affected by sensor fouling issues at the 242 lateral site, and continued operation at the site would require more frequent visits for cleaning and service to ensure data quality. During the study, instream specific conductance readings ranged from 966 to 3,030 microsiemens per centimeter (μS/cm) at 25 degrees Celsius. Computed dissolved-solids concentrations from discrete samples ranged from 690 to 2,580 milligrams per liter (mg/L). Dissolved-solids concentrations were estimated from regression models using the optimal relation between dissolved solids and environmental factors, such as specific conductance, water temperature, dissolved oxygen, streamflow, and seasonality. Specific conductance was the primary factor at all four sites and explained 87.6 to 94 percent of variation in dissolved solids. Water temperature, as an indicator of seasonality, was determined to be a statistically significant secondary factor at both the Colorado River above Imperial Dam and Colorado River below Cooper wasteway sites explaining an additional 6.9 and 2.1 percent of variation in dissolved solids, respectively. Regression models explained 87.6 to 96.9 percent of the variation in dissolved solids; the root mean square error in the modeled data ranged between about 6 and 27 mg/L.

Arizona, California↗

USGS2021

Substrate particle-size distribution, dissolved-oxygen concentrations, sediment temperatures, and groundwater/surface-water exchange in shoreline spawning habitat of sockeye salmon (Oncorhynchus nerka) of Lake Ozette, Western Washington

Sockeye salmon ( Oncorhynchus nerka ) spawn at beaches along Lake Ozette’s shoreline and within its tributary streams including Umbrella Creek and Big River in western Washington. The tributary-spawning aggregate of the Lake Ozette sockeye salmon population has been increasing from very low abundance through hatchery supplementation, but the beach-spawning aggregate has decreased from the early 20th century resulting in an Endangered Species Act listing of the Lake Ozette sockeye salmon population as “Threatened” in 1999. Among several factors inhibiting the recovery of beach spawning sockeye salmon, the quality of spawning habitat in beaches and low dissolved-oxygen concentrations in beach gravels during incubation were identified as important limitations on the recovery of this population. Proliferation of primarily native near-shore vegetation during the 20th century, as a result of alterations in the lake hydroperiod, accompanied by fine-grained sediment deposition was hypothesized as a potential cause of low rates of water circulation and dissolved-oxygen concentrations in beach spawning gravels. The potential for shoreline vegetation removal to restore spawning habitat function, including dissolved-oxygen concentrations, was evaluated in this report by measuring continuous dissolved-oxygen concentrations with data-logging dissolved-oxygen sensors, by measuring particle-size distribution of beach sediment, and by estimating groundwater/surface-water exchange using vertical sediment temperature profiles at three shoreline sampling areas. These sampling areas included an area of current spawning devoid of shoreline vegetation, an adjacent vegetated area, and an adjacent treatment area where a 3-meter-wide swath of existing above-ground vegetation was removed in 2018 prior to the study. Substrate particle-size distributions, dissolved-oxygen concentrations, sediment temperatures, and groundwater/surface-water exchange were compared among the three shoreline sampling areas. Median grain size (D 50 ) of sediment varied at sampling stations from medium sand fine to coarse gravel. The coarsest sediment generally occurred in the current spawning area that was devoid of vegetation; whereas the vegetated shoreline and the shoreline where above-ground vegetation was removed were characterized by finer sediment. Removal of above-ground vegetation resulted in increased D 50 at the most shoreward station at the treatment sampling area from 8.2 millimeters in 2018 to 21.6 millimeters in 2019 but other changes in substrate particle-size distribution in the treatment area were negligible. Increased grain size from 2018 to 2019 at this site suggests that while higher wave energy was allowed to mobilize sediment in the backshore area of the treatment area and winnow fine sediment during the winter, residual root structure in the treatment area may have limited the ability of wave energy to mobilize sediment after removal. During the November 2018 to March 2019 incubation period for sockeye salmon, dissolved-oxygen concentrations at the depth of sockeye salmon egg pockets (15–25 centimeters) within all three shoreline sampling areas were less than 1 milligram per liter throughout the deployment time (October 2018—May 2019) and below the threshold to sustain sockeye salmon embryo development (3 milligrams per liter). In addition, the similarity of dissolved-oxygen concentrations among all three shoreline sampling areas indicates that above-ground vegetation removal did not increase subsurface dissolved-oxygen concentrations. Groundwater/surface-water exchange measured from sediment temperature profiles were variable both within and across shoreline sampling areas. At the most lakeward stations, groundwater discharge to the lake ranged from 0.25 to 0.007 meter per day and was highest at the control station and lowest at the vegetated station. However, in general, the differences in groundwater/surface-water exchange across the three shoreline sampling areas were negligible. Collectively, these results suggest the process of removing above-ground vegetation had little effect on subsurface dissolved-oxygen concentrations and groundwater/surface-water exchange during the study period, but limitations of the study design, including retention of below-surface root cohesion after above-ground vegetation removal, too narrow of a band of vegetation removal, and a limited duration of the monitoring period, may have pre vented wave energy from winnowing fine-grained sediment along the shoreline and altering subsurface dissolved-oxygen concentrations during the study period. Response of the substrate particle-size distribution, groundwater/surface-water exchange, and subsurface dissolved-oxygen concentrations to shoreline vegetation removal that includes root-zone removal over a larger extent and longer periods than the 7-month study period from October 2018 to May 2019, however, remain unknown and warrant further investigation.

Washington↗

USGS2022

Sources and characteristics of dissolved organic carbon in the McKenzie River, Oregon, related to the formation of disinfection by-products in treated drinking water

Executive Summary This study characterized the concentration and quality of dissolved organic carbon (DOC) in the McKenzie River, a relatively undeveloped watershed in western Oregon, and its link to forming disinfection by-products (DBPs) in treated drinking water. The study aimed to identify the primary source(s) of DOC in source water for the Eugene Water & Electric Board’s (EWEB) conventional treatment plant on the McKenzie River near river mile 11, upstream of Hayden Bridge. The two classes of regulated compounds examined—trihalomethanes (THMs) and haloacetic acids (HAAs)—form when organic carbon in raw source water reacts with chlorine and (or) bromine during water treatment. The objectives of the study were to: characterize the amount and quality of DOC in the McKenzie River and select tributaries during storms; identify the most common types of carbon using UV-vis spectroscopy and other methods; evaluate optical properties for predicting DBP precursors in surface water; and identify land cover classes or vegetation types that may be important sources of organic carbon and DBP precursors in EWEB’s source water. Eleven storms were sampled synoptically in upstream-to-downstream fashion to provide a “snapshot” of water quality conditions at four sites on the McKenzie River from Frissell Bridge (6 miles downstream from Trail Bridge Reservoir) to the EWEB water treatment plant at Hayden Bridge and nine contributing tributaries. Storms included late summer and early autumn “first flush” events and late autumn, winter, and spring storms spanning a range in streamflows from 3,000 to 26,000 cubic feet per second as measured in the main stem McKenzie River at the EWEB water intake. Water samples were analyzed for DOC concentrations and optical properties (fluorescence and ultraviolet absorbance [UVA]) across a range of wavelengths to characterize the quantity and quality of dissolved organic matter (DOM) in the McKenzie River at the drinking water intake and upstream locations. Paired sets of source and finished water samples were collected at the EWEB treatment plant to identify DOC quality parameters in raw source water that might predict DBP concentrations in finished drinking water. DOC concentrations were relatively low in the McKenzie River (0.4–3 milligrams per liter [mg/L]; average 1.5 mg/L) but much higher in the tributaries. The highest DOC concentrations occurred during “first flush” storms in October 2012 and September 2013; the highest value (16 mg/L) was measured at the 52nd Street stormwater outfall. The average DOC concentration in the lower basin-tributaries was 3.8 mg/L; three middle basin tributaries—Quartz, Gate, and Haagen Creeks, which drain private forestland with less coniferous forest compared with other higher elevation tributaries— had slightly lower average DOC concentrations (2.8 mg/L). These middle-basin watersheds may be important sources of DOC and DBP precursors to the McKenzie River, even more so than the lower basin tributaries, depending on their flows (and loads). This is particularly true after the September 2020 Holiday Farm fire, which burned much of this area. DOC concentrations increased 68 percent in the McKenzie River between the uppermost reference site at Frissell Bridge and Vida; this includes drainage from Quartz Creek, Blue River Lake and Cougar Reservoir, which all contributed DOC to the main stem. In contrast, the lowermost tributaries draining most of the agricultural and urban land did not have a large effect on DOC in the McKenzie River despite their higher DOC concentrations because of their presumed relatively low streamflows and, consequently, DOC loads. Apart from the continuous flow monitors in the McKenzie River and some tributaries (Blue River and South Fork McKenzie River, and streamflow at Hayden Bridge and Vida, Camp Creek and some other locations), streamflow was not assessed during sample collection for this study. This lack of streamflow data precludes a detailed analysis of loads, which is discussed in the future studies section. All DBP concentrations in finished drinking water were less than EPA maximum contaminant levels (MCLs) of 0.080 mg/L for the four trihalomethanes (THM4) and 0.060 mg/L for five haloacetic acids (HAA5). During the 11 storm sampling events the maximum summed concentrations were about 0.040 mg/L for both THM4 and HAA5. Compliance monitoring samples, collected separately by EWEB, yielded some higher concentrations—0.046 mg/L THM4 and 0.047 HAA5—during the December 2012 storm. The corresponding benchmark quotient (BQ) values, which indicate how close a measured DBP concentration is to the MCL, were 0.58 and 0.78, respectively, for THM4 and HAA5. Compared with a similar 2007–08 McKenzie River study that did not target storm events, concentrations of THM4 and HAA5 in finished water were 68 percent and 33 percent higher, respectively, during the current study. Due to the high dilution rates in the McKenzie River main stem, many of the individual fluorescence excitation-emission measurements were low (<0.1 Raman units) and approached analytical detection limits. Parallel factor analysis (PARAFAC) resulted in a five-component model (C1–C5) that represents five unique organic fluorophores. Components C1, C2, and C3 represent DOM associated with soil-derived, humic-like, more degraded organic matter. In contrast, components C4 and C5 represent “fresher” DOM, derived from terrestrial and aquatic plants, including algae and cyanobacteria that are common in the McKenzie River and its tributaries and reservoirs. The fluorescence data and PARAFAC modeling suggest that most of the DOC in the McKenzie River originated from terrestrial sources (primarily components C1 and C2). The largest increases in DOC in the main stem occurred in the reach upstream of Vida, from inflows by Quartz Creek, Blue River, South Fork McKenzie River, and other tributaries. Concentrations of DBPs in EWEB’s finished drinking water were positively correlated with DOC concentrations in raw source water (THM4, p <0.05; HAA5, p <0.01) for paired samples collected 12−24 hours apart. DOC concentrations were significantly positively correlated ( p <0.001) with laboratory-based fluorescent dissolved organic matter (fDOM) measurements, suggesting fDOM as a useful parameter for monitoring and predicting DOC concentration in surface water and DBP concentrations in finished water. Of all the PARAFAC components in surface water, C5 had the highest correlations with DBPs in finished water (rho = 0.77–0.84, p <0.01), followed by components C1 and C2 (rho = 0.75 and 0.71, respectively, p <0.01). This C5 carbon is associated with recently produced DOM, possibly from decomposed terrestrial and aquatic vegetation. Model loadings of these three components were considerably higher in the sampled tributaries relative to the main stem McKenzie River, with most of the observed increases in the main stem apparent at Vida. This points to Quartz Creek or other tributaries in the reach between Frissell Bridge and the sampling site near Vida (South Fork McKenzie and Blue Rivers) as potentially key contributors of DOM source material that leads to the production of DBPs in treated drinking water. A limited load analysis showed that the reservoirs contributed 8–37 percent of the instantaneous DOC loads observed at Vida at the time of sampling, which suggests other sources such as Quartz Creek and other streams in the reach between Frissell Bridge and Vida are more important. Random forest analyses identified PARAFAC components C1 and C5 and fluorescence peaks A, C, M, T and N as the best predictors for HAA5 concentrations in finished drinking water, explaining 62.5 percent of the variation. The best predictors for THM4 were C1, C4 + C5, and peaks T, A, and N, which explained 33 percent of the variation. Several land cover and vegetation classes were correlated with DOC concentration and other optical measurements. The percentage of evergreen forest in each of the subwatersheds sampled was negatively correlated ( p <0.001) with DOC concentration and many optical indicators of DOM quantity: UVA 254 , fDOM, and all of the fluorescence peaks. In contrast, mixed (deciduous) forest was positively correlated ( p <0.001) with DOC, fDOM, UVA 254 , and several fluorescence peaks, demonstrating the importance of deciduous leaf fall in generating DOC and DBP precursors. The high level of human activities in the middle and lower portion of the basin—including timber harvesting and road construction on private forestland, agricultural, rural, industrial, and urban development—have resulted in the greatest loss in native coniferous and mixed deciduous forests in the basin. DOC loading from these tributaries and reservoir releases, which contain DOC from terrestrial and aquatic productivity, both enrich the McKenzie River. Concentrations of DOC increased an average of 71 percent (range 30–120 percent) in the McKenzie River between Frissell Bridge, the upstream reference site, and Vida. PARAFAC components C1, C2, and C5—which were correlated with DBPs in finished water—increased, on average, 109–136 percent (range 20–250 percent) in this same Frissell-to-Vida reach. These increases occur from input of tributaries in the middle basin such as Quartz Creek and others, as noted above. Future monitoring, field, and lab studies can improve our understanding of seasonal and spatial sources of organic carbon contributing DBP precursors to the McKenzie River and allow detection of long-term trends resulting from the recent Holiday Farm Fire, which burned 173,393 acres of forestland, including riparian areas along the main stem, and numerous structures, homes, and outbuildings in September 2020. Future studies could examine DOC fluxes and flushing of carbon from the watershed, investigate the role of precipitation amount and intensity in mobilizing carbon and sediment, and evaluate impacts to aquatic communities and human health as part of a post-fire assessment. Other areas ripe for study include evaluating the impacts of potential temperature increases on carbon sequestration and decomposition in the burned and unburned forests and identifying practices that foster sequestration of carbon in forest soils. The use of fluorescence sensors such as fDOM to monitor the concentration and composition of raw water supplies may be improved for detection of specific DBP precursors, to provide continuous and real-time information to treatment plant operators. Future studies that monitor DOM amount and quality, and DBP Formation Potential (FP), particularly during storm events, paired with streamflow measurements, as suggested above, could help identify areas that contribute high DOC loads and thus help managers identify the key areas to focus restoration activities. Other studies could examine treatment options for currently regulated DBPs and potentially unregulated compounds, including advanced biological treatments for their removal. This study was a collaboration between the U.S. Geological Survey (USGS) and EWEB in Eugene, Oregon, with additional funding provided from USGS Cooperative Matching Funds Program.

Oregon↗

USGS2022

Sediment and nutrient retention on a reconnected floodplain of an Upper Mississippi River tributary, 2013–2018

The connection of rivers with their floodplains has been greatly reduced in agricultural drainage basins, especially in the Upper Mississippi River Basin. The restriction of the Mississippi River from its floodplain has reduced the sediment trapping and nutrient deposition capabilities of the floodplain, exacerbating water quality problems in the river and in downstream waterbodies. A small part of the Maquoketa River, a tributary to the Upper Mississippi River, was permanently reconnected to its floodplain in 2010 when a levee failure resulted in breaches in two locations. This study quantified the water quality benefits of that reconnection from October 2013 through September 2018. As part of the study, data from groundwater monitoring wells were used to determined hydraulic connectivity and surface-water/groundwater mixing; soil samples were collected in the floodplain to quantify floodplain sediment and nutrient retention potential during postflood and dry, interflood periods; and sensors were placed in the Maquoketa River to quantify total suspended solids, nitrogen, and phosphorus concentrations and loads. The floodplain aquifer in the study area had low hydraulic gradients toward the Maquoketa (mean of 0.017) and Mississippi Rivers (mean of 0.0029) and reducing water-quality conditions (dissolved oxygen less than 1.0 milligram per liter [mg/L] and nitrate less than 0.04 mg/L as nitrogen) capable of denitrification. A specific conductance-based mixing indicated precipitation was the predominate source of groundwater; however, specific conductance-based mixing analysis was unable to distinguish between the river or direct precipitation as the source. The floodplain was fully inundated five times during the study: in June–July 2014, March 2015, January 2017, February 2018, and September 2018. During the March 2015 flood (the only inundation event with sufficient duration to leave quantifiable sediment deposition in the study area), the equivalent of 0.91 percent of the nitrate load and 3.8 percent of the phosphorus load was deposited as sediment on the floodplain. Potential nitrogen losses on the floodplain because of denitrification ranged from 250 kilograms per day (kg/d) as nitrogen in March 2015 to 668 kg/d as nitrogen in October 2014. Potential denitrification rates indicate that when the soil is inundated, inorganic nitrogen present in the soil and in the water column is rapidly denitrified. Soil phosphorus measurements indicated that floodplain soils contain a mean of 365 milligrams per kilogram as phosphorus but still have the capacity to remove phosphorus from flood waters of the Maquoketa River depending on the surface water phosphorus concentration. Results from this study indicate that restoration of even small river-floodplain connections can improve water quality in the Upper Mississippi River.

Iowa↗

USGS2022

The 2018 eruption of Mount Veniaminof, Alaska

The 2018 eruption of Mount Veniaminof occurred from September 3–4 to December 27, lasting about 114 days. This report summarizes the types of volcanic unrest that accompanied the eruption and provides a chronology of events and observations. Information about the 2018 eruption was derived from geophysical instrumentation on or near the volcano that included an eight-station seismic network and regional infrasound sensors. Other observations came from frequent satellite images of the eruption, occasional aerial photographs and videos contributed by passing pilots, and web-camera views of the volcano from Perryville, Alaska, about 35 kilometers (km) south of the volcano. Eruptive activity involved small vents on the upper south flank of a cinder cone (cone A) within the ice-filled caldera that characterizes Mount Veniaminof. The 2018 eruption consisted of occasional explosive emissions of ash and gas (reaching up to 6,000 meters above sea level), episodes of low-level lava fountaining, Strombolian explosive activity, and effusion of lava flows. By the end of the eruption, lava covered an area of about 600,000 square meters (m 2 ) on the lower south flank of cone A. The lava flows melted into ice and snow, slowly creating melt depressions around the flow margins. No unusual outflows of water were observed exiting the caldera through the main drainage northwest of the cone. Minor ash emissions were generated throughout the eruptive period, and trace amounts of ash fell on Perryville on October 25 and November 21–22. There were no reports of aircraft encounters with ash clouds. The amount of lava and ash erupted from early September to late December 2018 resulted in the generation of about 1,200,000 cubic meters (m 3 ) of lava and 20,000–30,000 m 3 of ash, which would characterize the 2018 activity as having an eruption magnitude of 1–2 on the Volcanic Explosivity Index (VEI) scale.

Alaska↗

USGS2023

Interaction of a legacy groundwater contaminant plume with the Little Wind River from 2015 through 2017, Riverton Processing site, Wyoming

The Riverton Processing site was a uranium mill 4 kilometers southwest of Riverton, Wyoming, that prepared uranium ore for nuclear reactors and weapons from 1958 to 1963. The U.S. Department of Energy completed surface remediation of the uranium tailings in 1989; however, groundwater below and downgradient from the tailings site and nearby Little Wind River was not remediated. Beginning in 2010, a series of floods along the Little Wind River began to mobilize contaminants in the unsaturated zone, resulting in substantial increases of uranium and other contaminants of concern in monitoring wells completed inside the contaminant plume. In 2011, the U.S. Department of Energy started a series of university and Government agency retrospective and field investigations to understand the processes controlling contaminant increases in the groundwater plume. The goals of the field investigations described in this report were to (1) identify and quantify the contaminant flux and potential associated biological effects from groundwater associated with the legacy plume as it enters a perennial stream reach, and (2) assess chemical exposure and potential effects to biological receptors from the interaction of the contaminant plume and the river. Field investigations along the Little Wind River were completed by the U.S. Geological Survey during 2015–17 in cooperation with the U.S. Department of Energy Office of Legacy Management to characterize: (1) seepage areas and seepage rates; (2) pore-water and bed sediment chemistry and hyporheic exchange and reactive loss; and (3) exposure pathways and biological receptors. All data collected during the study are contained in two U.S. Geological Survey data releases, available at https://doi.org/10.5066/F7BR8QX4 and https://doi.org/10.5066/P9J9VJBR . A variety of tools and methods were used during the field characterizations. Streambed temperature mapping, electrical resistivity tomography, electromagnetic induction, fiber-optic distributed temperature sensing, tube seepage meters, vertical thermal sensor arrays, and an environmental tracer (radon) were used to identify areas of groundwater seepage and associated seepage rates along specific sections of the study reach of the river. Drive points, minipiezometers, diffusive equilibrium in thin-film/diffusive gradients in thin-film probes, bed-sediment samples, and equal discharge increment sampling methods were used to characterize pore-water chemistry, estimate hyporheic exchange and reactive loss of selected chemical constituents, and quantify contaminant loadings entering the study reach. Sampling and analysis of surface sediments, filamentous algae, periphytic algae, and macroinvertebrates were used to characterize biological exposure pathways, metal uptake, and receptors. Areas of focused groundwater discharge identified by the fiber-optic distributed temperature sensing surveys corresponded closely with areas of elevated electrical conductivity identified by the electromagnetic induction survey results in the top 5 meters of sediment. During three monitoring periods in 2016, the mean vertical seepage rate measured with tube seepage meters was 0.45 meter per day, ranging from −0.02 to 1.55 meters per day. Five of the 11 locations where vertical thermal profile data were collected along the study reach during August 2017 indicated mean upwelling values ranging from 0.11 to 0.23 meter per day. Radon data collected from the Little Wind River during June, July, and August 2016 indicated a consistent inflow of groundwater to the central part of the study reach, in the area congruous with the center of the previously mapped groundwater plume discharge zone. During August 2017, the greatest attenuation of uranium from reactive loss in pore-water samples was observed at three locations along the study reach, at depths between 6 and 15 centimeters, and similar trends in molybdenum attenuation were also observed. Bed-sediment concentration profiles collected during 2017 also indicated attenuation of uranium and molybdenum from groundwater during hyporheic mixing of surface water with the legacy plume during groundwater upwelling into the river. Streamflow measurements combined with equal discharge increment water sampling along the study reach indicated an increase in dissolved uranium concentrations in the downstream direction during 2016 and 2017. Net uranium load entering the Little Wind River study reach was about 290 and 435 grams per day during 2016 and 2017, respectively. Biological samples indicated that low levels of uranium and molybdenum exposure were confined to the benthos in the Little Wind River within and immediately downstream from the perimeter of the groundwater plume. Concentrations of molybdenum and uranium in filamentous algae were consistently low at all sites in the study reach with no indication of increased exposure of dissolved bioavailable molybdenum or uranium at sites next to or downstream from the groundwater plume. Comparison of the August 2017 results from electromagnetic induction, tube seepage meters, vertical thermal profiling, and pore-water chemistry surveys were in general agreement in identifying areas with upwelling groundwater conditions along the study reach. However, the electroconductivity values measured with electromagnetic induction in the top 100 centimeters of sediment did not agree with sodium concentrations measured in pore-water samples collected at similar streambed depths. Differences and similarities between multiple methods can result in additional insights into hydrologic and biogeochemical processes that may be occurring along a reach of a river system interacting with shallow groundwater inputs. It may be advantageous to apply a variety of geophysical, geochemical, hydrologic, and biological tools at other Uranium Mill Tailings Remedial Action ( https://www.energy.gov/sites/prod/files/2014/10/f19/UMTRCA.pdf ) sites during the investigation of legacy contaminant plume interactions with surface-water systems.

Wyoming↗

USGS2022

Optimizing satellite resources for the global assessment and mitigation of volcanic hazards—Suggestions from the USGS Powell Center Volcano Remote Sensing Working Group

A significant number of the world’s approximately 1,400 subaerial volcanoes with Holocene eruptions are unmonitored by ground-based sensors yet constitute a potential hazard to nearby residents and infrastructure, as well as air travel and global commerce. Data from an international constellation of more than 60 current satellite instruments provide a cost-effective means of tracking activity and potentially forecasting hazards at volcanoes around the world. These data span the electromagnetic spectrum: ultraviolet, optical, infrared, and microwave (synthetic aperture radar). They can measure volcanic thermal and gas emissions, ground displacement, and surface and topographic change, providing information that addresses one of the grand challenges in volcanology—to overcome our incomplete understanding of the relation between volcanic unrest and eruption, which is currently based on only a few well-studied volcanoes. Although the potential of volcano remote sensing has been recognized for decades, there are many hurdles to clear before remote sensing data can be used fully by all volcano observatories. These include: (1) the limited temporal and spatial coverage of active volcanoes by satellites and the delayed distribution of those data; (2) the lack of background data acquired at all volcanoes; and (3) limited access to, and utilization of, remote sensing data in some areas owing to a lack of expertise, licensing, user-friendly formats, data access portals, or computational infrastructure. While remote sensing data will never replace ground-based monitoring, a joint observation strategy provides a powerful means of assessing volcanic activity before, during, and after hazardous eruptions, especially given the unique spatial, temporal, and spectral perspective provided by remote measurements. A coordinated international remote sensing observation strategy for volcanoes—similar to one used by the cryosphere community—along with a volcano space task group to maximize the utility of satellite data for volcano monitoring would be highly beneficial. Such a vision could facilitate (1) global coordination of satellite observations (as done for polar regions) for background monitoring and eruption response, (2) open data that can be rapidly distributed during crises, (3) communication tools and forums for discussion of satellite data, (4) integrated ground and satellite databases of unrest, and (5) global capacity building.

Scientific Investigations Report↗

USGS2023

Linear regression model documentation for computing water-quality constituent concentrations or densities using continuous real-time water-quality data for the Kansas River above Topeka Weir at Topeka, Kansas, November 2018 through June 2021

The Kansas River and its associated alluvial aquifer provide drinking water to more than 950,000 people in northeastern Kansas. Water suppliers that rely on the Kansas River as a water-supply source use physical and chemical processes to treat and remove contaminants before public distribution. An early-notification system of changing water-quality conditions allows water suppliers to proactively make decisions that affect water treatment. The U.S. Geological Survey (USGS), in cooperation with the Kansas Water Office (funded in part through the Kansas Water Plan), the Kansas Department of Health and Environment, The Nature Conservancy, the City of Lawrence, the City of Manhattan, the City of Olathe, the City of Topeka, WaterOne, and Evergy, began collecting water-quality data at the Kansas River above Topeka Weir at Topeka, Kansas (USGS site 06888990, hereafter referred to as the “Topeka site”), during November 2018 to develop linear regression models that relate continuous in situ water-quality sensor measurements to discretely sampled water-quality constituent concentrations or densities. The addition of the Topeka site expanded an existing water-quality monitoring network, which included the upstream Kansas River at Wamego, Kans., and downstream Kansas River at De Soto, Kans., sites. Linear regression analysis was used to develop models that compute real-time concentrations or densities for total dissolved solids, major ions, hardness as calcium carbonate, nutrients (nitrogen and phosphorus species), chlorophyll a , total suspended solids, suspended sediment, and Escherichia coli at the Topeka site using data collected during November 2018 through June 2021. Water-quality constituent concentrations or densities computed from the models documented in this report are available at the USGS National Real-Time Water-Quality website (https://nrtwq.usgs.gov), are useful to the public for cultural and recreational purposes, and can be used to guide water-treatment processes, compare conditions with Federal and State water-quality criteria, and characterize changes in Kansas River water-quality conditions through time.

Kansas↗

USGS2024

Extent and duration of cold-water areas associated with side channels and tributaries of the lower Yakima River, Washington, September 2018–20

Previous work on the lower Yakima River, Washington (downstream from Union Gap), has identified several cold-water areas that could be thermal refuges for migrating salmonids. These cold-water areas are characterized by small tributaries that are typically cooler than the main-stem river during summer months (June–August). Twenty-seven temperature sensors were deployed along the lower 90 miles of the Yakima River at 7 locations where cold water had been previously observed. Deployments lasted from 1 to 2 years from September 2018 to September 2020 to document the extent and duration of these cold-water areas. Cold-water areas included the mouths of tributaries, alongside channels, and alcoves. Throughout summer months, main-stem river temperatures were warm, averaging about 92 days, when maximum daily temperatures exceeded 21 degrees Celsius (°C). The relationship between temperatures in the lower Yakima River and its tributaries varied seasonally; tributary water temperatures were 2–10 °C cooler than the main-stem river during summer months but 6–10 °C warmer than main-stem temperatures during winter months. The cooling effect of tributary inputs reduced downstream temperatures in the main stem by an average of 2–4 °C up to 175 feet downstream from tributary mouths. Side channel locations showed evidence of cooling, most likely from subsurface groundwater seeps, but the magnitude of cooling was less evident compared to tributaries. This study provides new information on spatial and temporal dynamics of cold-water areas on the lower Yakima River, which might provide cold-water habitat for migrating fishes in the future.

Washington↗

USGS2024

Monitoring and assessment of urban stormwater best management practices at selected Chicago public schools in Chicago, Illinois, from September 1, 2016, to July 1, 2017

The Space to Grow program helps transform aging and neglected schoolyards of Chicago Public Schools into outdoor community spaces with the goal of promoting health and learning while addressing neighborhood flooding issues. Virgil I. Grissom Elementary School and Donald L. Morrill Math and Science School were selected in 2014 for schoolyard upgrades and the installation of various green infrastructure (GI) improvements. The U.S. Geological Survey installed sensors to measure precipitation, groundwater levels, and stormwater runoff volumes from September 1, 2016, to July 1, 2017. At Virgil I. Grissom Elementary School, about 933,000 gallons of water fell on the schoolyard during the monitoring period. No discharge was recorded coming from the GI sewer lines, but backflow indicated water was flowing from the sewer line draining the impervious running track into the combined manhole structure and backwards into the GI retention basins (as designed). This design allowed for a 100-percent capture rate. Native soil at Virgil I. Grissom Elementary School also was conducive to rapid infiltration. Soil borings at Virgil I. Grissom Elementary School indicated about 10.5 feet (ft) of fine sand overlying silty clay to a depth of at least 16 ft. At Donald L. Morrill Math and Science School, about 1,120,000 gallons of water fell on the schoolyard during the monitoring period. About 72.5 precent of this water was discharged into the sewer system, and the other 27.5 percent was captured by the GI. Unlike Virgil I. Grissom Elementary School, the soil profile at Donald L. Morrill Math and Science School consisted of about 5 ft of clay loam overlying stiff blue clay to a depth of at least 12 ft. The sewer line coming from the GI under the football field was at the bottom of the reservoir. This design seemed to allow water to flow out of the line before being absorbed by the retention basin.

Illinois↗