USGS Science⌕ Search

SEARCH · USGS Science

Results for “Limnology and Oceanography”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,656 records · Page 86Linked to original sources
USGS2025

Overcoming the data limitations in landslide susceptibility modelling

Data-driven models widely used for assessing landslide susceptibility are severely limited by the landslide and environmental data needed to create them. They rely on inventories of past landslide locations, which are difficult to collect and often nonrepresentative. Furthermore, susceptibility maps are most needed in regions without the means to assemble an inventory. To overcome these challenges, we develop a method for assessing shallow landslide susceptibility based on a probabilistic morphometric analysis of the landscape’s topography, rather than the characteristics of landslides. The model assumes that hillslopes with higher relief and gradient compared to the surrounding landscape are more prone to landslides. We demonstrate the superior performance of this approach over contrasting data-driven models across the northwestern United States. As our morphometric model only requires elevation data, it overcomes the major limitations of data-driven models and facilitates the creation of effective susceptibility models in areas where it was previously unfeasible.

Oregon, Washington↗
USGS2024

Predicted exposure of communities in southeastern United States to climate-related coastal hazards

A rigorous analysis of 21st Century multi-hazard exposure for U.S. Southeast Atlantic coastal communities indicates that up to 70% of residents will be exposed daily to shallow and emerging groundwater by ~2100, 15 times higher than from surficial flooding alone. This threat further exacerbates other coastal stressors, such as flooding, subsidence, and beach erosion, that impact these vulnerable coastal communities and ecosystems under expected future climate change scenarios.

Florida, Georgia, North Carolina, South Carolina, ↗
USGS2025

U.S. Geological Survey Groundwater Climate Response Network, 2024

As of October 2024, the U.S. Geological Survey (USGS) operated 588 sites across the United States and its territories as part of the Groundwater Climate Response Network (CRN). The CRN is comprised of wells selected to monitor the effects of climate variability, such as droughts, on groundwater levels nationwide. The CRN includes nearly 500 locations with real-time data and more than 100 sites with non-real-time data available to the public on the CRN web mapper and the USGS National Water Dashboard.

General Information Product↗
USGS2025

Migration of seismicity from the mantle to the upper crust beneath Harrat Lunayyir volcanic field, Saudi Arabia

Harrat Lunayyir is a volcanic field in Saudi Arabia that experienced a Mw~5.4 earthquake driven by an upper-crustal dike intrusion in May 2009. This volcanic field has exhibited numerous forms of volcanic seismicity both prior to and since the 2009 dike intrusion. Significantly, earthquakes within the lithospheric mantle and, rarely, the lower crust are present in the two-decade long seismicity catalog of Harrat Lunayyir. Here we analyze 24 years of volcanic seismicity at Harrat Lunayyir from 1998 to 2022. We find that: 1) precursory seismicity began at least eight years prior to the 2009 event, with a particularly notable seismic episode one year prior; 2) lithospheric mantle seismicity is highly localized in space and in time, largely occurring in discrete sequences lasting on the order of a few hours to a few days; 3) one seismic sequence clearly migrates upward from the lithospheric mantle to the upper crust, including seismicity within the nominally ductile lower crust; 4) crustal seismicity has been slowly declining over time; and 5) lithospheric-mantle seismicity does not show any apparent decline with time. From these observations we infer that the seismicity is driven by magmatic fluids or volatiles, and seismic monitoring of this volcanic field should continue into the future.

Harrat Lunayyir volcanic field↗
USGS2024

On algorithmically determined versus traditional macroseismic intensity assignments

The utility of macroseismic data, defined as the effects of earthquakes on humans and the built environment, has been increasingly recognized following the advent of online systems that now produce unprecedented volumes of macroseismic intensity information. Contributed reports from the U.S. Geological Survey “Did You Feel It?” (DYFI) system ( Wald et al ., 1999 ) are used to generate intensity values with an algorithm based on seminal work by Dengler and Dewey (1998) . The algorithm was developed initially to reproduce intensity values assigned by expert opinion using questionnaire results collected by telephone survey. In this article, I discuss reasons why intensity values from (self‐selected) DYFI responses can differ from values that would be assigned by expert opinion given more complete data from randomly selected participants. For example, with the data used by Dengler and Dewey (1998) , intensities near 4 could be determined from the percentage of people who felt shaking in each town. With less spatially rich data from self‐selected participants, this percentage often cannot be determined reliably. Audible noises are key additional diagnostic criteria for modified Mercalli intensity (MMI) 4, but, although the DYFI system includes a question about noise, following Dengler and Dewey (1998) , the DYFI algorithm does not include a noise indicator. At the upper end of the scale, as defined the DYFI algorithm yields a maximum intensity value of 9.05, nominally corresponding to peak ground acceleration of 75% g . These and other factors can result in DYFI values that are low compared to traditional MMI values assigned using expert opinion, even absent factors that can bias traditional MMI assignments. Modern ground‐motion intensity conversion equations determined using DYFI intensities are expected to be appropriate for DYFI intensities, but the results of this study suggest that biases may be introduced if DYFI and traditional intensities are assumed to be interchangeable.

Seismological Research Letters↗
USGS2024

Development of a hydrogeologic visualization model for western Sarpy County, Nebraska

Population in western Sarpy County, Nebraska, has steadily increased over the last several decades and has led to increased groundwater use for domestic purposes. To meet the increase in demand, the Papio-Missouri River Natural Resources District is seeking to use all available sources of groundwater in western Sarpy County. Additionally, elevated groundwater nitrate plus nitrite as nitrogen concentrations were detected, indicating the need to better understand the groundwater quality of the area. Although the general geology of the area is understood, the area does not have detailed information on the extent of the various aquifers, particularly the Dakota aquifer. To characterize these aquifers, the Papio-Missouri River Natural Resources District invested in airborne electromagnetic surveys of the area to better understand the subsurface geology. Although these surveys improved understanding of the groundwater systems in the area, the Papio-Missouri River Natural Resources District wanted to integrate the subsurface information with available water-quality and groundwater-level data. In response, the U.S. Geological Survey, in cooperation with the Papio-Missouri River Natural Resources District, the Nebraska Natural Resources Commission, and the Nebraska Department of Natural Resources, assembled geologic, hydrogeologic and nitrate plus nitrite as nitrogen information for the selected area into a three-dimensional visualization computer software package called GeoScene3D. The completed GeoScene3D project was assembled to provide a visualization of the groundwater systems and associated water-quality results in Sarpy County and to provide the Papio-Missouri River Natural Resources District managers with information that can be used to make more informed groundwater resource-planning decisions in the future. This report details the development of a three-dimensional model created within GeoScene3D to visualize the subsurface, particularly the Dakota Sandstone in western Sarpy County.

Nebraska↗
USGS2025

Assessing legacy nitrogen in groundwater using numerical models of the Long Island aquifer system, New York

Nitrogen transported along groundwater flow paths in coastal aquifers can contribute substantially to nitrogen loading into surface water receptors, particularly in hydrologic systems dominated by groundwater discharge. Nitrogen entrained in the aquifer is a function of land use and associated nitrogen sources at the time of groundwater recharge, which may differ considerably from present-day sources. Legacy nitrogen can result in substantial discrepancies between observed present-day nitrogen loading to surface water receptors and loading estimated from present-day sources. Additionally, legacy nitrogen can continue to discharge into surface waters after nitrogen mitigation actions have been undertaken. Here, we use a numerical modeling framework to compare three methods of estimating time-varying historical nitrogen loads to four water bodies (receptors) on eastern Long Island, New York. The methods span a range of data requirements and process complexity, from instantaneous receptor loads calculated from steady-state groundwater contributing areas, to transient loads estimated by explicitly simulating legacy groundwater nitrogen transport over a century with large changes in nitrogen sources and hydrologic conditions. The effects of legacy nitrogen on estimated receptor loads varied temporally and spatially within the study area. Depending on antecedent nitrogen inputs and hydrologic conditions, historical annual nitrogen loads estimated from transient simulations accounting for legacy nitrogen can be quite similar (<10% difference) or substantially different (±100%) from those estimated from simpler instantaneous methods. Continued input of present-day nitrogen sources using methods that account for legacy nitrogen results in asymptotic increases in receptor nitrogen loads over time, indicating that simulated present-day receptor nitrogen loads are not in equilibrium with present-day inputs. For these receptors in disequilibrium, models simulating transient groundwater nitrogen transport could be used to account for legacy nitrogen lag times to help resource managers evaluate the potential effectiveness of proposed nitrogen mitigation actions.

EarthArXiv↗
USGS2026

Asynchronous landslide seasonality across the United States

Mid-range landslide outlooks can facilitate weather-related landslide preparedness and disaster response planning, but seasonal landslide activity remains poorly quantified at continental scales. Leveraging >55,000 reported landslides from across the United States (U.S.), we used circular statistics to quantify landslide seasonality in 67 National Weather Service County Warning Areas (CWAs). We found regional differences in landslide season timing and duration, with transitions between domains variably corresponding to climate class or river basin. We assessed differences in seasonality by movement type for slides, flows, and falls, detecting apparent, but uncertain, differences between slide and fall seasonalities in 27 of 35 (77%) of CWAs with both types reported. In the Pacific Northwest, where long records exist, we found a credible shift toward a later mean landslide season in western Washington from 1990 to 2020, but no trend in western Oregon. Our results can provide emergency planners a resource to assess seasonal landslide probability nationwide.

Geophysical Research Letters↗
USGS2025

Overview of The SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest earthquake sequence

We present initial findings from the ongoing Community Stress Drop Validation Study to compare spectral stress‐drop estimates for earthquakes in the 2019 Ridgecrest, California, sequence. This study uses a unified dataset to independently estimate earthquake source parameters through various methods. Stress drop, which denotes the change in average shear stress along a fault during earthquake rupture, is a critical parameter in earthquake science, impacting ground motion, rupture simulation, and source physics. Spectral stress drop is commonly derived by fitting the amplitude‐spectrum shape, but estimates can vary substantially across studies for individual earthquakes. Sponsored jointly by the U.S. Geological Survey and the Statewide (previously, Southern) California Earthquake Center our community study aims to elucidate sources of variability and uncertainty in earthquake spectral stress‐drop estimates through quantitative comparison of submitted results from independent analyses. The dataset includes nearly 13,000 earthquakes ranging from M 1 to 7 during a two‐week period of the 2019 Ridgecrest sequence, recorded within a 1° radius. In this article, we report on 56 unique submissions received from 20 different groups, detailing spectral corner frequencies (or source durations), moment magnitudes, and estimated spectral stress drops. Methods employed encompass spectral ratio analysis, spectral decomposition and inversion, finite‐fault modeling, ground‐motion‐based approaches, and combined methods. Initial analysis reveals significant scatter across submitted spectral stress drops spanning over six orders of magnitude. However, we can identify between‐method trends and offsets within the data to mitigate this variability. Averaging submissions for a prioritized subset of 56 events shows reduced variability of spectral stress drop, indicating overall consistency in recovered spectral stress‐drop values.

California↗
USGS2026

Remote compositional analyses of space-weathered lunar maria

Visible-to-shortwave infrared (VSWIR) reflectance spectroscopy has revolutionized our understanding of planetary surface compositions. However, space-weathering processes on airless bodies complicate quantitative compositional analyses. Here, we present a framework to isolate the signatures of space weathering in VSWIR spectra of lunar maria by leveraging radiative transfer modeling under the assumptions that (i) a space-weathered target can be expressed as a mixture of fresh and fully space-weathered components and (ii) remaining signatures can be modeled by including agglutinates as an end-member component. We first validate this approach against laboratory spectra of space-weathered Apollo mare soils of known mineral compositions using a probabilistic Markov Chain Monte Carlo implementation of the Hapke radiative transfer model. Second, we illustrate how this approach can be applied to orbital Moon Mineralogy Mapper data. The proposed space-weathering correction workflow for lunar maria could be expanded to other lunar lithologies and applied to existing and future data sets.

Planetary Science Journal↗
USGS2025

Simulating human behavior under earthquake early warning

Earthquakes are a rapid-onset hazard where advance planning and learning plays a key role in mitigating injuries and death to individuals. Recent advances in earthquake detection have resulted in the development of earthquake early warning (EEW) systems. These systems can provide advance warning to predetermined geographic regions that an earthquake is in progress, which may result in individuals receiving warning seconds before significant shaking is felt at their location. This additional time could allow individuals to take more effective protective actions during the immediate disaster. To demonstrate this, we created an agent-based simulation of a basic apartment that allowed us to randomly and repeatedly simulate an individual receiving and responding to an EEW message. The results of our preliminary simulation show that, in our study environment, earthquake early warning alerts have the potential to allow for sufficient time for individuals to take protective actions.

Washington↗
USGS2024

Chloride concentrations in groundwater from the western part of the Southern Hills regional aquifer system, Louisiana, 2021–22

Groundwater is heavily used for public supply and industrial uses in the Baton Rouge, Louisiana, area. Lowered water levels resulting from groundwater withdrawals have induced the movement of saltwater towards wells in East Baton Rouge and West Baton Rouge Parishes. Saltwater intrusion has the potential to affect water supply infrastructure, reduce water availability for some uses, and increase treatment costs. To document current conditions, samples were collected from 161 wells screened in 10 aquifers of the Southern Hills regional aquifer system during November 2021 through February 2022. The results were compared with historical data to identify where chloride concentrations are increasing, which could indicate that saltwater intrusion is occurring. Saltwater intrusion, to varying degrees and areal extents, was observed in most of the 10 aquifers. The limited availability of monitoring wells near or within some of the known saltwater plume areas restricts tracking of the movement or delineation of the plumes’ current extents.

Louisiana↗
USGS2025

Controls on water quality below a reclaimed surface coal mine, southeastern Montana

Coal mining and reclamation can have a profound influence on hydrogeologic systems, with clear consequences for groundwater quality, yet their long-term influence on downgradient water quality over time following reclamation is less well documented. Geochemical trends were evaluated in water quality downgradient of a fully reclaimed landscape at the former Big Sky Mine in the Rosebud Creek watershed (southeastern Montana, USA), over a 3-year period (2020–2022), including bond release in 2022. Within 6 km downgradient from the reclaimed area, sulfate concentrations decreased from approximately 3500 to 1800 mg l −1 within the Miller Coulee alluvial aquifer. Major ions, δ 34 S SO4 values, and residence time tracers suggest that the observed decreases in sulfate concentration result from a combination of dilution by mixed-age inflows and incomplete transit of the high salinity plume from the mine boundary. Both bedrock and alluvial aquifers of the Rosebud Creek corridor contained contributions of millennia-old regional groundwater, which may serve to mitigate mine-derived high salinity waters. Rosebud Creek, which traverses the outflow zone of Miller Coulee in the study area, exhibited high sulfate concentrations during low flows and consistent downgradient increases in sulfate concentration. The possibility of plume dynamics in Miller Coulee suggests that the greatest water quality impacts may not yet have reached Rosebud Creek.

Montana↗
USGS2026

Multi-objective optimization of a hydro-economic model in an over-allocated agricultural basin

Groundwater depletion for agricultural irrigation poses significant environmental and economic challenges. This study introduces a proof-of-concept that combines hydro-economic modeling, scenario-based modeling, and multi-objective optimization to manage pumping curtailment in an over-allocated basin in the western United States. Three optimization scenarios were evaluated, each offering different degrees of management flexibility. Results reveal that scenarios with finer spatial resolution achieved greater environmental benefits per unit profit loss. Additionally, strategies allowing fractional reductions in curtailed wells–rather than complete shutdowns based on water rights seniority–substantially improved efficiency, highlighting the value of increased decision-making flexibility. Although scenario testing can aid stakeholder engagement and strategy exploration, multi-objective optimization provides a systematic framework to quantify tradeoffs between competing objectives. This combined approach demonstrates promise for building consensus and supporting the design of sustainable water management strategies that balance agricultural livelihoods with ecosystem preservation.

Oregon↗
USGS2024

Characterizing directivity in small (M 2.4-5) aftershocks of the Ridgecrest sequence

Directivity, or the focusing of energy along the direction of an earthquake rupture, is a common property of earthquakes of all sizes and can cause increased hazard due to azimuthally dependent ground‐motion amplification. For small earthquakes, the effects of directivity are generally less pronounced due to reduced rupture size, yet the directivity in small events can bias source property estimates and provide important insights into general regional faulting patterns. However, due to observational limitations, directivity is usually only measured and modeled for large events. As such, many studies of small earthquakes either ignore directivity altogether or assume a constant rupture direction for all events in a cluster. In our study, we apply a refined directivity fitting method constrained with two separate methods of source deconvolution to the dataset of aftershocks of the 2019 Ridgecrest earthquakes, which contain a large number of well‐recorded small‐to‐mid sized earthquakes occurring in close proximity to each other. The revealed directivity of 100+ small (M 2.4–5) earthquakes is highly heterogeneous and primarily oblique to and away from the main fault strike, suggesting a complex postseismic stress redistribution. In addition, the energy focusing effect of directivity appears to bias the selection of high‐quality data from stations in the direction of rupture, leading to average stress‐drop increases of 50% if directivity is not accounted for.

California↗
USGS2026

Rewilding the upper Klamath River Basin: Rapid recolonization of Chinook salmon following the world’s largest dam removal

Habitat fragmentation is a global driver of decline in biodiversity, yet evaluations of ecological response following re-connection remain rare. In 2024, four hydroelectric dams on the Klamath River were removed, reconnecting over 640 km of anadromous habitat and marking the largest dam removal project completed to date. We used a stationary high-resolution multi-beam imaging SONAR to quantify adult Chinook salmon ( Oncorhynchus tshawytscha ) passage into newly reopened reaches during the first two migratory seasons following dam removal. An estimated 7,742 (95% CI: 7,702–7,778) Chinook salmon migrated upstream in 2024 and 13,310 (95% CI: 12,876–13,733) in 2025, representing 18–19% of fish returning to the Klamath River Basin. Within this period, Chinook salmon recolonized 88% of their documented historical distribution, expanding into 345 km of reconnected habitats and reaching elevations of up to 1,250 m. Recolonization required fish to swim through dam removal sites, complex hydraulic corridors and engineered fishways, demonstrating the propensity for rapid recolonization at basin scale despite these challenges. These findings provide the first quantitative assessment of salmon response to the world’s largest dam removal and demonstrate how reconnection can catalyze large-scale recolonization in historically fragmented river networks.

California, Oregon↗
USGS2025

Strong shaking from past Cascadia Subduction Zone earthquakes encoded in coastal landforms

Strong earthquakes along subduction zones are often devastating events, but sparse records along some tectonic margins limit our understanding of seismic hazards. Constraining shaking intensities is critical, especially in subduction zones with infrequent but large-magnitude earthquakes like the Cascadia Subduction Zone (CSZ), where the lack of recorded ground motions has led to uncertainty in the severity and potential impacts of future earthquakes. Here we fill this observational gap with a novel inventory of quantitative estimates of past shaking intensities from geotechnical modeling of coastal landforms. One hundred fifty-four deep-seated landslides and 65 fragile geologic features constrain minimum and maximum peak ground accelerations, respectively. These estimates are broadly consistent with model predictions of M9 ruptures, suggesting strong shaking of 0.4–0.8 g during past CSZ earthquakes. Local discrepancies between our geologic shaking constraints and earthquake simulations may inform past rupture behavior, leading to better predictions of shaking intensity for future earthquakes.

California, Oregon, Washington↗
USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗