USGS Science⌕ Search

SEARCH · USGS Science

Results for “International Journal of Disaster Risk Reduction”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 86Linked to original sources
USGS2025

Groundwater response to managed aquifer recharge at the Southeast Houghton Artificial Recharge Project in Tucson, Arizona

Managed aquifer recharge is a widespread practice for storing water in the subsurface as groundwater. At a managed aquifer recharge facility in southern Arizona, groundwater-level and repeat microgravity data were collected to monitor aquifer response. These data were used to inform parameter identification for an unsaturated-zone flow model used to simulate the recharge process. The facility, the Southeast Houghton Artificial Recharge Project (SHARP), consists of 3 surface basins (about 27,600 square meters [6.8 acres] total surface area) where recycled water is distributed in recharge cycles lasting several months, with dry periods in between. During the study period, December 2020–December 2022, Tucson Water (the City of Tucson’s water utility) reported 6.56×10 6 cubic meters of water (5,320 acre-feet) recharged. Monitoring included groundwater-level observations at 3 monitoring wells and repeat microgravity measurements at as many as 22 locations (some stations were destroyed between surveys). Six gravity surveys were carried out using absolute- and relative-gravity meters. Large gravity increases, more than 250 microgals, were observed during the first repeat survey, 3.5 months after the start of recharge, but only in the immediate vicinity of the recharge basins. Data show that water moved downward to the water table, and storage changes in the unsaturated zone away from the facility were likely minimal. Gravity decreased at stations more than 1 kilometer from the facility, consistent with regional groundwater-level changes. Groundwater-level increases in wells adjacent to the recharge basins began 2 months after the second repeat gravity survey, and 5.5 months after recharge began. Unsaturated-zone flow modeling was carried out using software that simulates water movement and parameter estimation. Model calibration was carried out by minimizing an objective function calculated from the differences between simulated and observed groundwater levels, and between simulated and observed repeat microgravity data. Including repeat microgravity data in the objective function reduced the uncertainty in estimated parameter values for saturated hydraulic conductivity and saturated water content. Modeling indicated that the unsaturated zone between the recharge basins and the water table does not become saturated even after 685 days of simulated infiltration. This gradual wetting may account for increasing infiltration rates over time, as hydraulic conductivity increases with increasing water content. Unsaturated-zone water content decreased rapidly between recharge cycles. Model-simulated groundwater mounding extended about 1 kilometer from the center of SHARP after the 685-day period following the onset of recharge.

Arizona↗
USGS2025

Smectite-rich horizons in Inceptisols trigger shallow landslides in tropical granitic terranes

Puerto Rico was affected by >70,000 landslides in the wake of 2017 Hurricane Maria, and landslide prevalence was especially high in the Utuado region in the Cordillera Central. Landslide density was highest where soil parent material is granodiorite; landslide slip surfaces tended to be shallow (<60 cm), and often were mobilized rapidly and with long runout distances. This study combines field observations with soil mineralogy (bulk and clay fractions), soil geochemistry (bulk fraction), and soil strength as determined by field cone penetrometer testing (CPT) to test the hypothesis that clay-rich subsoil horizons function as slip planes when water-logged. Soil pits were excavated to depths of ∼200 cm in Ultisols on an undulating plateau and to ∼100 cm in Inceptisols on steep slopes (36-43 o ) that flank the plateau and cone penetrometer tests (CPT) were done within 2 m of the soil pit. Six pits were located adjacent to scarps from previous landslides, enabling analysis of soil profiles downward through extrapolated slip surfaces. Results from X-ray diffraction (XRD), X-ray fluorescence (XRF) and thermogravimetric analysis (TGA) indicate that soils are heterogeneous, often with subsoil horizons enriched in clay minerals and immobile elements (Al, Fe, Ti). Inceptisols on steep slopes often contain smectite-rich horizons at 30–60 cm depth that appear to function as slip surfaces; in other Inceptisols, such horizons are not present and landslide susceptibility is potentially lower. In Ultisols, soil mineralogy is dominated by kaolinite with minor halloysite, and increased kaolinite content at soil depths ≥80 cm at some sites suggests potential slip surfaces enhancing probability of landslides. The origin of clay-rich horizons appears to be (1) fractures in granodiorite that facilitate water flow and leaching, accelerating mineral dissolution during early weathering stages, and (2) smectite-rich buried soils under permeable colluvium likely deposited by a prior mass wasting event. Where clay-rich layers occur beneath more-permeable horizons, rapid infiltration then absorption of water in clay-rich subsoil horizons causes decreased shear strength and increased landslide susceptibility.

Puerto Rico↗
USGS2026

Compact seismicity bursts have different characteristics from regional seismicity

Earthquakes tend to cluster, developing into sequences driven by stress perturbations and transient fault-zone processes. Depending on the driving process, earthquake sequences show differing behaviors. This variability challenges our ability to observe or distinguish these driving processes in high resolution. Here we systematically identify seismicity bursts throughout southern California using new statistical methods and examine their causes with other independent geophysical observations. Seismicity bursts are defined as statistically significant seismicity rate anomalies. Our approach has the advantage of being data driven, depending on few earthquake occurrence assumptions. We find abundant seismicity bursts across southern California, most frequently occurring along the San Jacinto Fault and in the Salton Sea and Coso geothermal fields. These seismicity bursts are highly compact in space and time, often encompassed by a 5 km radius and have durations less than 10 hr. Many of the seismicity bursts have their largest earthquake near the beginning of the sequence, but the largest earthquake is usually not an obvious mainshock. We utilize a variety of independent geophysical data sets to analyze the characteristics of the seismicity bursts, finding that the seismicity bursts have low b-values, low spectral stress drops, and varied stress ratios compared to regional seismicity. These differences suggest that seismicity bursts are driven by transient processes acting frequently across fault networks.

California↗
USGS2025

Enhancing mineral systems exploration through geochronology, thermochronology, and isotope analysis: USGS Geochron and USGS Isotope databases

A mineral systems approach to mineral exploration provides a comprehensive framework for understanding ore deposit formation by examining the geodynamic, magmatic, hydrothermal, and sedimentary processes responsible for mineralization, alteration, and remobilization of economic mineral deposits. Temporal and thermal constraints on ore genesis are crucial for refining mineral system models and guiding predictive exploration strategies. Geochronology and thermochronology offer invaluable insights into the timing and thermal evolution of ore-forming processes, whereas isotopic analyses provide critical information on the source and geochemical history of ore-forming fluids. Combining these methodologies have proven highly effective for mineral exploration in regions like Australia, however, their combined application has been limited in the United States. To apply these tools to mineral systems-based exploration, the U.S. Geological Survey (USGS) has developed two products: (1) The USGS Geochron Database, and (2) the USGS Isotope Database. These databases provide centralized repositories of geo/thermochronological dates and data (Geochron Database) and both radiogenic and stable isotope data (Isotope Database) generated by the USGS and partners over the past decades. Integrating these datasets together and with traditional exploration approaches provides the mineral exploration community with powerful tools for determining the temporal and thermal histories of ore systems and identifying metallogenic source provinces.

Continental United States↗
USGS2026

Early Miocene volcanic rocks and associated tectonics, Lava Hills and southern Bristol Mountains, California

Volcanic rocks of latest Oligocene to early Miocene age form an east-west belt across part of the central eastern Mojave Desert from the Whipple Mountains on the east to the Rosamond Hills on the west. We term this the central belt because it is separated from northern and southern belts by swaths with no volcanic rocks. Limited geochronologic data indicate that much of the belt is latest Oligocene and early Miocene in age, about 24 to 19 Ma, a finding that is consistent with these rocks being overlain by the 18.8 Ma Peach Spring Tuff in many places. We describe Miocene geology in a central area of the belt, in the Lava Hills, southern Bristol Mountains, and southern Old Dad Mountains. Sedimentary basins formed coeval with early andesite to rhyolite volcanism, progressing from fluvial and lacustrine tuffaceous sandstone to volcanic lavas, tuffs, and breccias, indicating that early basins formed proximal to volcanic edifices. Higher strata are fluvial and lacustrine with lavas punctuating the sequence. Although basins may partly have been formed within topographic lows bounded by volcanic domes, plateaus, and stratovolcanoes, consistent stratigraphic sections over wide areas indicate that tectonic basin evolution affected broad areas. The volcanic section is capped by local basalt flows and the regional Peach Spring Tuff. Limited data on normal faults support interpretations of early extensional basin development caused by northeast-southwest oriented stretching. Later extension caused stratal rotations, tilting early deposits down to the southwest. This tilted and subsequently beveled basin architecture was overlain by the youngest volcanic deposits, primarily rhyolite and basalt. The Peach Spring Tuff, 18.8 Ma, lies within this upper unit. Similar stratigraphic and structural relations are exposed in the nearby Marble Mountains and Van Winkle Mountain sections, reinforcing that a broad area underwent similar volcanism and tectonism. In our study area the upper unit is only very gently tilted except near dextral strike-slip faults of the eastern California shear zone. These late Miocene to Recent faults are represented as four main fault zones spaced about 5 km apart, representing distributed shear north of the Bristol Lake basin.

California↗
USGS2022

South Carolina and Landsat

South Carolina, the eighth State admitted to the union, transcends its size with its deep, rich history; striking beauty; vast natural resources; and extensive cultural diversity. Home to part of the Blue Ridge Mountains of the Central Appalachians, the Upstate is graced with more than 100 waterfalls, while the Lowcountry borders the Atlantic Ocean with 187 miles of coastline and 35 barrier islands. Forests cover two-thirds of the State, and forestry and agriculture together, as agribusiness, make up South Carolina’s leading industry. Two historic crops—cotton and tobacco—still rank in the top 10 commodities, though corn and soybeans now rank higher. Poultry, cattle, peanuts, and flowers also make the list. South Carolina’s population totals more than five million. Other residents include a variety of wildlife, bird, reptile, and fish species, including Ursus americanus (black bears), Alligator mississippiensis (American alligators), and Tursiops truncatus (bottlenose dolphins). More than 100 tree species also reside in South Carolina, which pays homage to one with its “The Palmetto State” nickname. South Carolina’s subtropical climate, long coastline, and lower elevations make it highly susceptible to tornado and hurricane activity and coastal flooding. Projected sea-level rise is a growing concern. A view from space can help monitor and manage natural resources on the land and in rivers, marshes, and the coast. Landsat reveals not just what an area looks like now, but also insights from decades ago.

South Carolina↗
USGS2026

Groundwater dependency and hydroclimatic influences on riparian and upland vegetation productivity, Upper San Pedro, Arizona, United States

In arid and semi-arid regions, groundwater sustains vegetation through subsurface water access, yet the responses of groundwater-dependent ecosystems (GDEs) to changing hydroclimate and groundwater availability are relatively understudied. This study investigates seasonal and spatial patterns in vegetation greenness using Landsat Enhanced Vegetation Index (EVI) values across riparian and upland zones in the semi-arid Upper San Pedro (USP) watershed, southern Arizona, which experiences a bimodal precipitation regime. We paired 25 years (2000–2024) of EVI and depth to groundwater (DTG) data from 89 wells and climate metrics (precipitation and vapour pressure deficit) to quantify the sensitivity of vegetation to subsurface moisture as well as atmospheric moisture supply and demand. Vegetation at wells near the USP riparian area showed strong associations between EVI and DTG anomalies during the monsoon season, indicating sustained groundwater use even during this wet period when summer precipitation is abundant. In contrast, upland vegetation that lacked access to groundwater showed minimal sensitivity in EVI to DTG and was generally less responsive to vapour pressure deficit. Interestingly, the riparian GDEs were not decoupled from precipitation and climate variability. These results underscore the importance of groundwater for maintaining riparian productivity and highlight the utility of remote sensing in identifying vegetation-climate-groundwater linkages across heterogeneous dryland landscapes.

Arizona↗
USGS2025

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico↗
USGS2025

Estimating earthquake source depth using teleseismic broadband waveform modeling at the USGS National Earthquake Information Center

The U.S. Geologic Survey National Earthquake Information Center (NEIC) monitors global seismicity, producing a catalog of earthquake source parameters in near-real-time to provide information that can help mitigate the societal impact of earthquakes. The NEIC commonly relies on teleseismic observations to constrain earthquake source parameters (e.g., location, depth, magnitude, and mechanism) due to a lack of local and regional observations. For these ‘teleseismic’ events, depth phase (i.e., pP , sP ) arrival time observations provide the best estimate on source depth. However, depth phases are often difficult to accurately identify and/or pick. Therefore, NEIC relies on waveform modeling, such as those determined from W-phase ( M ww ), body wave ( M wb ), and regional ( M wr ) moment tensor estimations, to provide constraints on source depth. While depth estimates from these approaches are informative, higher frequency observations provide more precise estimates because depth phases are more prominently observed at higher frequencies. Here, we present NEIC’s relatively high-frequency (~0.04 to 1 Hz) teleseismic waveform modeling approach, termed Synthetic Depth Phase Modeling (SynDepth), for determining source depth. SynDepth was developed to provide NEIC with a tool that enables rapid, accurate, and quantifiable estimates of earthquake source depth in cases where locator depths are not reliable. This relatively simple and fast procedure searches over 1 km-incremented source depths and an expanding triangular source-time function to find the best-fitting solution. We compare automatic SynDepth solutions for a dataset of 1,216 earthquakes (M5.5-M7.6) between 2017 and 2021 to NEIC-derived depth estimates from other methods. Our approach provides a robust depth estimate for earthquakes lacking local arrival time data, and it minimizes the need for analyst review of depth-phase picks ( pP , sP ) or using predefined ‘fixed’ depths.

Seismological Research Letters↗
USGS1998

Trace elements in streambed sediment and fish liver at selected sites in the Upper Colorado River Basin, Colorado 1995-96

Trace elements were analyzed in streambed-sediment samples collected from 16 sites and in fish-liver samples collected from 14 sites in the Upper Colorado River Basin in Colorado as part of the National Water-Quality Assessment program. Sites sampled represented agricultural, mining, mixed, and urban/recreation land uses and background conditions. The results for 15 trace elements in streambed-sediment and in fish-liver samples are presented in this report. Fourteen of the selected trace elements were detected in streambed-sediment samples collected at all sites. Twelve of the selected trace elements were detected in fish liver at more than 50 percent of the sites. Cadmium, copper, selenium, and zinc were selected for a more detailed analysis. Cadmium, copper, and zinc concentrations in streambed sediment were highest at mining land-use sites in the Southern Rocky Mountains physiographic province. Selenium concentrations in streambed sediment were highest at an agricultural land-use site in the Colorado Plateau physiographic province. The concentration of trace elements in streambed sediment generally increased as particle size decreased. Concentrations of trace elements in fish liver generally did not follow the same relation to land use as concentrations in streambed sediment; however, cadmium concentrations in fish liver were highest at a mining land-use site in the Southern Rocky Mountains physiographic province, and selenium concentrations in fish liver were highest at an agricultural land-use site in the Colorado Plateau physiographic province. Copper and zinc concentrations in fish liver were highest at mixed land-use sites. Comparison of streambed-sediment and fish-liver concentrations to two other similar NAWQA studies in the Rocky Mountain region generally indicated similar patterns in relation to land use for streambed sediment, but not for fish liver. Cadmium, copper, and zinc concentrations in streambed sediment were highest at sites affected by mining in all three study units. Selenium concentrations in streambed sediment did not indicate relations among the three study units when compared to land use. Cadmium in fish liver was highest at sites affected by mining in all three study units. Copper, selenium, and zinc in fish liver did not indicate relations among the three study units when compared to land use.

Colorado↗
USGS2025

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater↗
USGS2024

Debris-flow entrainment modelling under climate change: Considering antecedent moisture conditions along the flow path

Debris-flow volumes can increase along their flow path by entraining sediment stored in the channel bed and banks, thus also increasing hazard potential. Theoretical considerations, laboratory experiments and field investigations all indicate that the saturation conditions of the sediment along the flow path can greatly influence the amount of sediment entrained. However, this process is usually not considered for practical applications. This study aims to close this gap by combining runout and hydrological models into a predictive framework that is calibrated and tested using unique observations of sediment erosion and debris-flow properties available at a Swiss debris-flow observation station (Illgraben). To this end, hourly water input to the erodible channel is predicted using a simple, process-based hydrological model, and the resulting water saturation level in the upper sediment layer of the channel is modelled based on a Hortonian infiltration concept. Debris-flow entrainment is then predicted using the RAMMS debris-flow runout model. We find a strong correlation between the modelled saturation level of the sediment on the flow path and the channel-bed erodibility for single-surge debris-flow events with distinct fronts, indicating that the modelled water content is a good predictor for erosion simulated in RAMMS. Debris-flow properties with more complex flow behaviour (e.g., multiple surges or roll waves) are not as well predicted using this procedure, indicating that more physically complete models are necessary. Finally, we demonstrate how this modelling framework can be used for climate change impact assessment and show that earlier snowmelt may shift the peak of the debris-flow season to earlier in the year. Our novel modelling framework provides a plausible approach to reproduce saturation-dependent entrainment and thus better constrain event volumes for current and future hazard assessment.

Illgraben basin↗
USGS2026

Transit time modeling framework for predicting freshwater salinization in urban catchments

The salinity of inland freshwaters is rising globally, particularly in urban watersheds where winter road deicers are widely applied. Attributing stream salinity dynamics to specific sources and transport pathways remains challenging due to episodic salt inputs, engineered drainage, and strong coupling between hydrology and subsurface storage. We present a modeling framework that couples climate-driven deicer build-up and wash-off with transient transit time distribution theory to simulate salt transport through drainage, interflow, and groundwater pathways. Applied to an urban watershed in Northern Virginia (USA), the model reproduces ten years of high-frequency stream salinity measurements across daily-to-decadal timescales. The calibrated model implies an average deicer application of 206 tonnes Cl −1 yr −1 , or roughly one 20 kg bag of rock salt person −1 yr −1 when normalized by the 20,000 people living in the watershed. In winter months, higher infiltration routes a large fraction of snowmelt and deicers into shallow subsurface pathways, enhancing vadose-zone and interflow contributions to stream salinity. Limited subsurface storage capacity and seasonal hydrologic turnover flush excess chloride from the vadose zone and groundwater during subsequent summer storms. By linking climate-driven deicer inputs, hydrologic connectivity, and stream water age, the framework provides a transferable basis for diagnosing and managing freshwater salinization in urban watersheds.

Virginia↗
USGS2026

Spatio-temporal modeling for assessing geoenergy resources: A workflow applied to gas in place variation in coal beds

The ability to estimate spatio-temporal changes in hydrocarbon reservoir properties and energy resources within pore volumes is essential for optimizing production, reservoir management, geologic energy storage, and safety in underground mining operations. In coal seams, predicting remaining methane gas-in-place (GIP) is critical for quantifying producible gas and improving mine safety and productivity through effective ventilation planning. Although such changes are commonly evaluated using physics-based numerical simulation models, these approaches often require extensive data, calibration effort, and time. This study presents a spatio-temporal geostatistical modeling approach that bridges the gap between purely spatial models and full numerical simulations. The method is applied to a case study of coal seam degasification in the Mary Lee coal group, Black Warrior Basin, Alabama, USA, to estimate GIP evolution over time within a selected mining district. The analysis uses published data from prior natural gas production history-matching of degasification using vertical wells. Empirical spatial and temporal statistics were calculated for reservoir pressure and water saturation, and spatio-temporal variogram models were fitted to experimental variograms. These models provided the structural basis for spatio-temporal kriging, integrated with spatial estimates of time-invariant parameters (porosity, density, and thickness) to estimate GIP. This approach enabled estimation of GIP changes over time, including periods without data. Boxplots of GIP estimates indicated systematic depletion and decreasing spatial variability, reflecting the impacts of degasification. Comparison with cumulative gas production from empirical well records showed approximately 85% agreement based on a relative similarity metric. Spatio-temporal GIP estimates were also used to estimate methane emissions to longwall ventilation systems and compared with reported emissions from the U.S. EPA Greenhouse Gas Reporting Program, showing similar distributions (≈80%) given data limitations. Overall, this integrated modeling approach provides time-dependent GIP estimates with broader implications for resource assessment applications.

Alabama↗
USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗
USGS2025

Mapping a Carrington storm

A map is presented of median 1-min-resolution peak geoelectric-field strength across the United States as would be induced by magnetic storms as intense as the 2 September 1859 Carrington storm. The map is constructed from two data sets: Magnetometer time series from 22 ground-based observatories recording 40 magnetic storms, and surface impedance tensors derived from magnetotelluric measurements acquired at 1616 survey sites across the contiguous United States. Carrington-class storm geoelectric fields are likely to be very strong in the United States East and Midwest; > 5.00 V/km at many places. In Virginia, strengths would likely range from 30.30 V/km, with a 68% confidence interval of [19.44,47.20] V/km, to as low as 0.05 [0.03,0.07] V/km. Comparison of model geopotentials with those measured on 30 long lines, indicates errors of about 18%. A Carrington-class storm would likely induce geoelectric fields with strengths 55% greater than for the 13–14 March 1989 storm.

contiguous United States↗
USGS2026

Subsurface vertical connectivity shapes solute transport to montane streams: Insights from watershed-scale geophysics-informed modeling

Headwater catchments provide essential water and nutrients to downstream ecosystems. The timing and evolution of their transport is shaped in part by the “invisible” subsurface structure but have been largely unexplored at the watershed scale. This raises a fundamental question: how and to what extent does subsurface structure influence streamflow and solute transport in montane watersheds? Here, we test controls of three-dimensionally resolved subsurface structure on solute transport, which reflects source waters and water residence time. We integrate the geophysically mapped architecture of Coal Creek, a headwater catchment in the Colorado River Basin, into numerical flow-transport models. Our results reveal greater vertical connectivity elongates flow paths and enhances deep groundwater contributions to streams, therefore substantially influencing the timing and magnitude of solute transport. In contrast, watershed-integrated outlet discharge can be predicted without high-resolution subsurface information. These findings demonstrate incorporating subsurface architecture is critical for predicting ecosystem health and contaminant transport.

Colorado↗
USGS2026

Relating glassy rind thicknesses to ambient air temperatures at the Lost Jim flow field in the Imuruk Lake volcanic field, Alaska

The Lost Jim flow field, in the Imuruk Lake volcanic field, Alaska, extends west ~34 km from a single vent, crossing subarctic tundra and currently touches several lakes and streams. The weighted mean of five 36Cl cosmogenic exposure ages from the Lost Jim pāhoehoe flow is 7.73 ± 0.37 ka, indicating this eruption occurred substantially after the eruption of the underlying Camille flow, which was emplaced at 39.7 ± 1.3 ka. Paleoclimate records indicate the period when the Lost Jim flow field was emplaced was after deglaciation, and the climate was similar to today. We propose that the emplacement of lava in these cold subarctic conditions can lead to faster cooling of the lava surface compared to lava emplaced in warmer locations such as mid- latitude cold deserts. Glass abundance in the outermost rinds at the Lost Jim flow field was on average 74 % with 6.4 mm thick rims, compared to 60 % with 2.9 mm rims for cold mid-latitude desert samples. We interpret increased glass content as a proxy for rapid cooling likely occurring partly during winter. Glassiness values varied less across vent, margin, and mid-flow locations when compared to the mid-latitude flows suggesting the Lost Jim flow field was broadly impacted by the subarctic climate as opposed to responding to local microclimates. Our results indicate that lava glassiness may be a useful environmental indicator of cooler (in this case subarctic) conditions.

Alaska↗