USGS Science⌕ Search

SEARCH · USGS Science

Results for “Final Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,549 records · Page 86Linked to original sources
USGS2022

A channel sampling strategy for measurement of mineral modal and chemical composition of drill cores: Application to lower oceanic crustal rocks from IODP Expedition 345 to the Hess Deep rift

We report a new sampling strategy for collecting representative samples of drill core. By splitting the core with a diamond saw into working and archive halves, the saw cuttings constitute a “channel” sample, the best subsample from which to obtain an average mineralogical and geochemical composition of a core. We apply this procedure to sampling core of the lower oceanic crust in the Hess Deep obtained during Expedition 345 of the Integrated Ocean Drilling Program (now International Ocean Discovery Program). Our results show that particles produced by sawing range from sand to clay sizes. Sand- and silt-sized cuttings can be sampled with a spatula, whereas clay-sized particles remained in suspension after 12 h and could be collected only by settling, aided by centrifuge. X-ray diffraction (XRD) analysis and Rietveld refinement show that phyllosilicates were fractionated into the clay-sized fraction. Thus, collection of both the sedimented fraction and the clay-sized suspended fraction (commonly > 15 wt % of the total) is necessary to capture the whole sample. The strong positive correlation between the recovered sample mass (in grams) and length of core cut demonstrates that this sampling protocol was uniform and systematic, with almost 1.4 g sediment produced per centimeter of core cut. We show that major-element concentrations of our channel samples compare favorably with the compositions of billet-sized samples analyzed aboard the JOIDES Resolution , but the results show that individual billet analyses are rarely representative of the whole core recovered. A final test of the validity of our methods comes from the strong positive correlation between the loss on ignition (LOI) values of our channel samples and the H 2 O contents calculated from the modal mineralogy obtained by X-ray diffraction and Rietveld refinement. This sampling procedure shows that grain-sized fractionation modifies both mineralogical and chemical compositions; nevertheless, this channel sampling method is a reliable method of obtaining representative samples of bulk cores. With the ever-increasing precision offered by modern analytical instrumentation, this sampling protocol allows the accuracy of the analytical results to keep pace.

Scientific Drilling↗
USGS1996

Character, paleoenvironment, rate of accumulation, and evidence for seismic triggering of Holocene turbidites, Canada Abyssal Plain, Arctic Ocean

Four box cores and one piston core show that Holocene sedimentation on the southern Canada Abyssal Plain for the last 8010 ± 120 yr has consisted of a continuing rain of pelagic organic and ice-rafted clastic sediment with a net accumulation rate during the late Holocene of ⩽10 mm/1000 yr, and episodically emplaced turbidites 1–5 m thick deposited at intervals of 830 to 3450 yr (average 2000 yr). The average net accumulation rate of the mixed sequence of turbidites and thin pelagite interbeds in the cores is about 1.2 m/1000 yr. Physiography suggests that the turbidites originated on the Mackenzie Delta or its clinoform, and δ 13 C values of −27 to −25%. in the turbidites are compatible with a provenance on a delta. Extant displaced neritic and lower slope to basin plain calcareous benthic foraminifers coexist in the turbidite units. Their joint occurence indicates that the turbidites originated on the modern continental shelf and entrained sediment from the slope and rise enroute to their final resting place on the Canada Abyssal Plain. The presence of Middle Pleistocene diatoms in the turbidites suggests, in addition, that the turbidites may have originated in shallow submarine slides beneath the upper slope or outer shelf. Small but consistent differences in organic carbon content and δ 13 C values between the turbidite units suggest that they did not share an identical provenance, which is at least compatible with an origin in slope failures. The primary provenance of the ice-rafted component of the pelagic beds was the glaciated terrane of northwestern Canada; and the provenance of the turbidite units was Pleistocene and Holocene sedimentary deposits on the outer continental shelf and upper slope of the Mackenzie Delta. Largely local derivation of the sediment of the Canada Abyssal Plain indicates that sediment accumulation rates in the Arctic Ocean are valid only for regions with similar depositional sources and processes, and that these rates cannot be extrapolated regionally. The location of an elliptical zone of active seismicity over the inferred provenance of the turbidites suggests that they were triggered by large earthquakes. Distal turbidite sediment accumulation rates were more than two orders of magnitude greater than pelagic sediment accumulation rates on the Canada Abyssal Plain during the last 8000 years. This disparity reconciles the discrepancy between the high accumulation rates assumed by some for the Arctic Ocean because of the numerous major rivers and large ice sheets that discharge into this small mediterranean basin and the low pelagic sedimentation rates that have been reported from the Arctic Ocean.

Marine Geology↗
USGS2013

Preliminary hydrogeologic assessment near Tassi and Pakoon Springs, western part of Grand Canyon-Parashant National Monument, Arizona

Tassi and Pakoon Springs are both in the Grand Wash Trough in the western part of Grand Canyon-Parashant National Monument on the Arizona Strip. The monument is jointly managed by the National Park Service (NPS) and the Bureau of Land Management. This study was in response to NPS’s need to better understand the influence from regional increases in groundwater withdrawals near Grand Canyon-Parashant on the groundwater discharge from Tassi and Pakoon Springs. The climate of the Arizona Strip is generally semiarid to arid, and springs in the monument provide the water for the fragile ecosystems that are commonly separated by large areas of dry washes in canyons with pinyon and juniper. Available hydrogeologic data from previous investigations included water levels from the few existing wells, location information for springs, water chemistry from springs, and geologic maps. Available groundwater-elevation data from the wells and springs in the monument indicate that groundwater in the Grand Wash Trough is moving from north to south, discharging to springs and into the Colorado River. Groundwater may also be moving from east to west from Paleozoic rocks in the Grand Wash Cliffs into sedimentary deposits in the Grand Wash Trough. Finally, groundwater may be moving from the northwest in the Mesoproterozoic crystalline rocks of the Virgin Mountains into the northern part of the Grand Wash Trough. Water discharging from Tassi and Pakoon Springs has a major-ion chemistry similar to that of other springs in the western part of Grand Canyon-Parashant. Stable-isotopic signatures for oxygen-18 and hydrogen-2 are depleted in the water from both Tassi and Pakoon Springs in comparison to other springs on the Arizona Strip. Tassi Spring discharges from multiple seeps along the Wheeler Fault, and the depleted isotopic signatures suggest that water may be flowing from multiple places into Lake Mead and seems to have a higher elevation or an older climate source. Elevated water temperatures and a depleted stable-isotopic signature for Pakoon Springs suggest that the water may be traveling along a deep circulating flowpath, have multiple sources of water, been recharged at a high elevation, and (or) has an older climate source.

Arizona↗
USGS2016

Using inferential sensors for quality control of Everglades Depth Estimation Network water-level data

The Everglades Depth Estimation Network (EDEN), with over 240 real-time gaging stations, provides hydrologic data for freshwater and tidal areas of the Everglades. These data are used to generate daily water-level and water-depth maps of the Everglades that are used to assess biotic responses to hydrologic change resulting from the U.S. Army Corps of Engineers Comprehensive Everglades Restoration Plan. The generation of EDEN daily water-level and water-depth maps is dependent on high quality real-time data from water-level stations. Real-time data are automatically checked for outliers by assigning minimum and maximum thresholds for each station. Small errors in the real-time data, such as gradual drift of malfunctioning pressure transducers, are more difficult to immediately identify with visual inspection of time-series plots and may only be identified during on-site inspections of the stations. Correcting these small errors in the data often is time consuming and water-level data may not be finalized for several months. To provide daily water-level and water-depth maps on a near real-time basis, EDEN needed an automated process to identify errors in water-level data and to provide estimates for missing or erroneous water-level data. The Automated Data Assurance and Management (ADAM) software uses inferential sensor technology often used in industrial applications. Rather than installing a redundant sensor to measure a process, such as an additional water-level station, inferential sensors, or virtual sensors, were developed for each station that make accurate estimates of the process measured by the hard sensor (water-level gaging station). The inferential sensors in the ADAM software are empirical models that use inputs from one or more proximal stations. The advantage of ADAM is that it provides a redundant signal to the sensor in the field without the environmental threats associated with field conditions at stations (flood or hurricane, for example). In the event that a station does malfunction, ADAM provides an accurate estimate for the period of missing data. The ADAM software also is used in the quality assurance and quality control of the data. The virtual signals are compared to the real-time data, and if the difference between the two signals exceeds a certain tolerance, corrective action to the data and (or) the gaging station can be taken. The ADAM software is automated so that, each morning, the real-time EDEN data are compared to the inferential sensor signals and digital reports highlighting potential erroneous real-time data are generated for appropriate support personnel. The development and application of inferential sensors is easily transferable to other real-time hydrologic monitoring networks.

Florida↗
USGS1989

Geohydrology of the alluvial and terrace deposits of the North Canadian River from Oklahoma City to Eufaula Lake, central Oklahoma

This investigation was undertaken to describe the geohydrology of the alluvial and terrace deposits along the North Canadian River between Lake Overholser and Eufaula Lake, an area of about 1,835 square miles, and to determine the maximum annual yield of ground water. A 1982 water-level map of the alluvial and terrace aquifer was prepared using field data and published records. Data from test holes and other data from the files of the U.S. Geological Survey and the Oklahoma Water Resources Board were used to establish the approximate thickness of the alluvial and terrace deposits. The North Canadian River from Lake Overholser, near Oklahoma City, to Eufaula Lake is paralleled by a 2- to 3-mile wide band of alluvium. Scattered terrace deposits on either side of the alluvium reach an extreme width of 8 miles. Rocks of Permian age bound the alluvial and terrace deposits from the west to the midpoint of the study area; Pennsylvanian rocks bound the alluvial and terrace deposits from that point eastward. Three major aquifers are present in the study area: the alluvial and terrace aquifer, consisting of alluvium and terrace deposits of Quaternary age in a narrow band on either side of the North Canadian River; the Garber-Wellington aquifer of Permian age, consisting of an upper unconfined zone and a lower confined zone separated by relatively impermeable shales; and the Ada-Vamoosa aquifer of Pennsylvanian age. At locations were the alluvial and terrace aquifer overlies either of the other aquifers, there is hydraulic continuity between the alluvial and terrace aquifer and the other aquifers, and water levels are the same. Most large-scale municipal and industrial pumping from the Garber-Wellington aquifer is from the lower zone and has little discernible effect upon the alluvial and terrace aquifer. The total estimated base flow of the North Canadian River for the studied reach is 264 cubic feet per second. Evapotranspiration from the basin in August is about 60 cubic feet per second for the North Canadian River from Lake Overholser to a measuring station above Eufaula Lake. Estimated recharge rates to the alluvial and terrace aquifer in the basin range from 1.7 inches at the west edge of the study area to 7.0 inches at the east edge. Total permitted withdrawal from the aquifer, according to records of the Oklahoma Water Resources Board, ranged from 2,107 acre-feet per year in 1942 to about 21,415 acre-feet per year in 1982. Simulations of the alluvial and terrace aquifer from Lake Overholser to Eufaula Lake were made using a finite-difference model developed by McDonald and Harbaugh (1984). The area of the aquifers was subdivided into a finite-difference grid having 30 rows and 57 columns with cells measuring 1 mile in the north-south direction and 2 miles in the east-west direction. The model was calibrated in two steps: A steady-state calibration simulated head distribution prior to extensive pumping of the aquifer in 1942, and a transient calibration simulated head distribution after extensive pumpage. The final horizontal hydraulic conductivity used for the alluvial and terrace aquifer was 0.0036 feet per second (310 feet per day) at all locations. The recharge rate for the alluvial and terrace aquifer ranged from 1.7 inch per year in the west to 7.0 inches per year in the east, and averaged about 3.3 inches per year. A specific yield of 15 percent was used for the transient simulation. Permitted pumpage for 1942 through 1982 was used in the digital model to estimate the annual volume of water in storage in the alluvial and terrace aquifer for the years for this time period. The 1982 permitted pumpage rates were used for projections for 1983 to 2020. The estimated volume of water in storage was 1,940,000 acre-feet in 1982. Because the estimated recharge rate is equal to the allowed pumpage rate in 1982, the projected volume of water in storage in both 1993 and 2020 was 1,890,000 acre-feet.

Water-Resources Investigations Report↗
USGS2018

Inland waters

1. The total flux of carbon—which includes gaseous emissions, lateral flux, and burial—from inland waters across the conterminous United States (CONUS) and Alaska is 193 teragrams of carbon (Tg C) per year. The dominant pathway for carbon movement out of inland waters is the emission of carbon dioxide gas across water surfaces of streams, rivers, and lakes (110.1 Tg C per year), a flux not identified in the First State of the Carbon Cycle Report (SOCCR1; CCSP 2007). Second to gaseous emissions are the lateral fluxes of carbon through rivers to coastal environments (59.8 Tg C per year). Total carbon burial in lakes and reservoirs represents the smallest flux for CONUS and Alaska (22.5 Tg C per year) (medium confidence). 2. Based on estimates presented herein, the carbon flux from inland waters is now understood to be four times larger than estimates presented in SOCCR1. The total flux of carbon from inland waters across North America is estimated to be 507 Tg C per year based on a modeling approach that integrates high-resolution U.S. data and continental-scale estimates of water area, discharge, and carbon emissions. This estimate represents a weighted average of 24 grams of carbon per m2 per year of continental area exported and removed through inland waters in North America (low confidence). 3. Future research can address critical knowledge gaps and uncertainties related to inland water carbon fluxes. This chapter, for example, does not include methane emissions, which cannot be calculated as precisely as other carbon fluxes because of significant data gaps. Key to reducing uncertainties in estimated carbon fluxes is increased temporal resolution of carbon concentration and discharge sampling to provide better representations of storms and other extreme events for estimates of total inland water carbon fluxes. Improved spatial resolution of sampling also could potentially highlight anthropogenic influences on the quantity and quality of carbon fluxes in inland waters and provide information for land-use planning and management of water resources. Finally, uncertainties could likely be reduced if the community of scientists working in inland waters establishes and adopts standard measurement techniques and protocols similar to those maintained through collaborative efforts of the International Ocean Carbon Coordination Project and relevant governmental agencies from participating nations.

Book chapter↗
USGS1971

Subsurface waste disposal by means of wells - A selective annotated bibliography

Subsurface waste disposal by means of wells is the practice of using drilled wells to inject unwanted substances into underground rock formations. The use of wells for this purpose is not a new idea. As long ago as the end of the last century, it was common practice to drill wells for the express purpose of draining swamps and small lakes to reclaim the land for agricultural purposes. A few decades later in the 1920's and 1930's many oil companies began using injection wells to dispose of oil-field brines and to repressurize oil reservoirs. During World War II, the Atomic Energy Commission began using injection wells to dispose of certain types of radioactive wastes. More recently, injection wells have been drilled to dispose of a variety of byproducts of industrial processes. The number of such wells has increased rapidly since Congress passed the Clean Streams Act of 1966, which restricted the discharge of waste into surface waters. Many scientists and public officials question the propriety of using the term "disposal" when referring to the underground injection of wastes. Their reasons are that underground injection is not, as many advocates claim, "a complete and final answer" to the waste-disposal problem. Rather, it is merely a process wherein the injected wastes are committed to the subsurface with uncertainty as to their ultimate fate or limits of confinement. In effect, the wastes, undiminished and unchanged, are removed from the custody of man and placed in the custody of nature. Although the concept of waste-injection wells is relatively simple, the effects of waste injection can be very complex, particularly when dealing with the exotic and complex components of some industrial wastes. Besides the physical forces of injection, there are many varied interactions between the injected wastes and the materials within the injection zone. Because these changes occur out of sight in the subsurface, they are difficult to assess and not generally understood. In addition, the various aspects of the problem involve a wide spectrum of science and engineering. Hence, articles published on the subject are widely dispersed in the technical and scientific literature.

Water Supply Paper↗
USGS1980

Research on interactive genetic-geological models to evaluate favourability for undiscovered uranium resources

Current methods of evaluating favourability for undiscovered uranium resources are unduly subjective, quite possibly inconsistent and, as a consequence, of questionable reliability. This research is aimed at reducing the subjectivity and increasing the reliability by designing an improved method that depends largely on geological data and their statistical frequency of occurrence. This progress report outlines a genetic approach to modelling the geological factors that controlled uranium mineralization in order to evaluate the favourability for the occurrence of undiscovered uranium deposits of the type modeled. A genetic model is constructed from all the factors that describe the processes, in chronological sequence, that formed uranium deposits thought to have a common origin. The field and laboratory evidence for the processes constitute a geologic occurrence base that parallels the chronological sequence of events. The genetic model and the geologic-occurrence base are portrayed as two columns of an interactive matrix called the "genetic-geologic model". For each column, eight chronological stages are used to describe the overall formation of the uranium deposits. These stages consist of (1) precursor processes; (2) host-rock formation; (3) preparation of host-rock; (4) uranium-source development; (5) transport of uranium; (6) primary uranium deposition; (7) post-deposition modification; and (8) preservation. To apply the genetic-geological model to evaluate favourability, a question is posed that determines the presence or absence of each attribute listed under the geologic-occurrence base. By building a logic circuit of the attributes according to either their essential or non-essential nature, the resultant match between a well-documented control area and the test area may be determined. The degree of match is a measure of favourability for uranium occurrence as hypothesized in the genetic model. This process of geological decision analysis results in a series of favourability maps that can be combined into a final composite favourability map.

Conference Paper↗
USGS2003

User's Manual for the New England Water-Use Data System (NEWUDS)

Water is used in a variety of ways that need to be understood for effective management of water resources. Water-use activities need to be categorized and included in a database management system to understand current water uses and to provide information to water-resource management policy decisionmakers. The New England Water-Use Data System (NEWUDS) is a complex database developed to store water-use information that allows water to be tracked from a point of water-use activity (called a 'Site'), such as withdrawal from a resource (reservoir or aquifer), to a second Site, such as distribution to a user (business or irrigator). NEWUDS conceptual model consists of 10 core entities: system, owner, address, location, site, data source, resource, conveyance, transaction/rate, and alias, with tables available to store user-defined details. Three components--site (with both a From Site and a To Site), a conveyance that connects them, and a transaction/rate associated with the movement of water over a specific time interval form the core of the basic NEWUDS network model. The most important step in correctly translating real-world water-use activities into a storable format in NEWUDS depends on choosing the appropriate sites and linking them correctly in a network to model the flow of water from the initial From Site to the final To Site. Ten water-use networks representing real-world activities are described--three withdrawal networks, three return networks, two user networks, two complex community-system networks. Ten case studies of water use, one for each network, also are included in this manual to illustrate how to compile, store, and retrieve the appropriate data. The sequence of data entry into tables is critical because there are many foreign keys. The recommended core entity sequence is (1) system, (2) owner, (3) address, (4) location, (5) site, (6) data source, (7) resource, (8) conveyance, (9) transaction, and (10) rate; with (11) alias and (12) user-defined detail subject areas populated as needed. After each step in data entry, quality-assurance queries should be run to ensure the data are correctly entered so that it can be retrieved accurately. The point of data storage is retrieval. Several retrieval queries that focus on retrieving only relevant data to specific questions are presented in this manual as examples for the NEWUDS user.

Open-File Report↗
USGS2001

Ecotoxicology of Wild Mammals

An international group of 32 scientists has critically reviewed the scientific literature on exposure and effects of environmental contaminants in wild mammals. The underlying theme of this text is encompassed by the following four questions: What exactly do we know about environmental contaminants in mammals? What are the commonalities and differences between mammal orders/species in the effects that contaminants have? How and to what degree of accuracy can we predict the adverse effects of environmental contaminants on mammalian wildlife? How significant are contaminant insults compared with other density-independent and -dependent factors such as habitat loss, climatic factors and disease? The book is organized three topical sections including introductory chapters that provide a background on environmental contaminants and the mammalian orders, eight taxonomic chapters discussing all aspects of the exposure to and effects of contaminants in mammalian orders, and four thematic chapters that review and discuss generic issues including biomarkers, prediction and extrapolation of exposure and effects, hazard and risk assessment, and the relative significance of contaminants on mammals compared with other commonly encountered stressors. A final a summary chapter identifies phylogenetic trends, critical data gaps, and overarching research needs. Although the absolute number of toxicological studies in domesticated and wild mammals eclipses that wildlife species, a detailed examination of our knowledge base reveals that information for 'wild' birds is actually greater than that for 'wild' mammals. Of the various mammalian taxa, ecotoxicological data is most noticeably lacking for marsupials and monotremes. In contrast, rodents (comprising 43% of all mammal species) have been studied extensively, despite evidence of their tolerance to some organochlorine compounds, rodenticides, and even radionuclides. Mammalian species at greatest risk of exposure include those that consume a high percentage of their body weight on a daily basis. Aquatic mammals tend to bioaccumulate tremendous burdens of lipophilic contaminants, although storage in their fat depots may actually limit toxicity. Carnivores appear to be more sensitive to adverse effects of environmental contaminants than herbivores. Remarkably few of the thousands of compounds manufactured worldwide have been toxicologically evaluated in wild mammals, and concentrations of even fewer have been monitored in tissues.

Ecological & Environmental Toxicology Series.↗
USGS2017

Preliminary evaluation of the behavior and movements of adult spring Chinook salmon in the Chehalis River, southwestern Washington, 2014

Recent interest in flood control and restoration strategies in the Chehalis River Basin has increased the need to understand the current status and ecology of spring Chinook salmon ( Oncorhynchus tshawytscha ). Spring Chinook salmon have the longest exposure of all adult Chinook salmon life histories to the low-flow and high water temperature conditions that typically occur during summer. About 100 adult spring Chinook salmon were found dead in the Chehalis River in July and August 2009. Adult Chinook salmon are known to hold in cool-water refugia during warm summer months, but the extent to which spring Chinook salmon might use thermal refugia in the Chehalis River is unknown. A preliminary evaluation of the movements and temperature exposures of adult spring Chinook salmon following their return to the Chehalis River was conducted using radiotelemetry and transmitters equipped with temperature sensors. A total of 12 spring Chinook salmon were captured, radio-tagged, and released in the main-stem Chehalis River between May and late June 2014. Tagged fish were monitored from freshwater entry through the spawning period using a combination of fixedsite monitoring locations and mobile tracking. Water temperature and flow conditions in the main-stem Chehalis River during 2014 were atypical compared to historical averages. Mean monthly water temperatures between March and August 2014 were higher than any decade since 1960 and mean monthly discharge was 90–206 percent of the discharge in previous years. Overall, 92 percent of the tagged fish were detected, with a mean of 102 d in the detection history of tagged fish. Seven tagged fish (58 percent) moved upstream, either shortly after release (5–8 d, 57 percent), or within about a month (34–35 d, 29 percent). One fish (14 percent) remained near the release location for 98 d before moving upstream. The final fates for the seven fish that moved upstream following release included six fish that were assigned a fate of spawner and one fish with an unknown fate. Tagged fish showed limited movements during the peak water temperatures in July and August, and were not frequently detected at sites where water temperatures exceeded 21 °C . The mouths of the Skookumchuck and Newaukum Rivers were commonly used by tagged fish for extended periods during peak water temperatures and study fish with a fate of spawner were last detected in these tributaries. This pilot study represents a substantial contribution to the understanding of spring Chinook salmon in the Chehalis River Basin, and provides information for the design and execution of future evaluations. The water temperatures and flow conditions during the 2014 study period were not typical of the historical conditions in the basin and the numbers of tagged fish monitored was relatively low, so results should be interpreted with those cautions in mind.

Washington↗
USGS2002

Geologic map of MTM -40252 and -40257 quadrangles, Reull Vallis region of Mars

Mars Transverse Mercator (MTM) quadrangles -40252 and -40257 cover a portion of the highlands of Promethei Terra northeast of the Hellas basin. The map area consists of heavily cratered ancient highland materials of moderate to high relief, isolated knobs and massifs of rugged mountainous materials, extensive tracts of smooth and channeled plains, and other surficial deposits. Reull Vallis, an approximately 1,500 km-long outflow channel system, cuts through the southeast corner of the map area. Regional slopes are to the southwest, toward the Hellas basin, as indicated by Martian topographic maps and the orientations of channels along the northeast rim of the Hellas basin. The Martian highlands cover more than 60 percent of the planet's surface and are primarily in the southern hemisphere. Most of the highlands consist of rugged, densely cratered terrains believed to represent the final phase of heavy bombardment in the inner solar system about 4.0 billion years ago. Parts of the Martian highlands show evidence of extensive degradation and modification. The map area shows landforms created by numerous geologic processes, including tectonism, fluvial activity, and mass wasting. The occurrence of fluvial features, such as outflow channels and valley networks, has significant implications for past Martian conditions. Determining the geology of the highlands northeast of the Hellas basin provides a better understanding of the role and timing of volatile-driven activity in the evolution of the highlands. Photogeologic mapping at 1:500,000 scale from analysis of Viking Orbiter images complements geomorphic studies of Reull Vallis and other highland outflow systems, of drainage networks, and of highland debris aprons and regional geologic mapping studies of the highlands at the 1:2,000,000 scale and 1:1,000,000 scale. Crater size-frequency distributions have been compiled to constrain the relative ages of geologic units and determine the timing and extents of the observed geologic processes.

IMAP↗
USGS1980

Zeolitization of Tertiary tuffs in lacustrine and alluvial deposits in the Ray-San Manuel area, Final and Gila Counties, Arizona

Specimens of tuff in the Ray-San Manuel area, southeastern Arizona, have been X-rayed to determine the present approximate mineralogic composition and the type and degree of alteration of the tuffs. Some of the tuffs consist largely of glass or have been partly or completely altered to calcium montmorillonite; many of them have been almost completely zeolitized or contain a zeolite and some clay. Only three zeolitized specimens contain a little glass. With four exceptions, the zeolitie is clinoptilolite; the exceptions are one altered to chabazite, one to mordenite, one to erionite, and one to erionite, clinoptilolite, and chabazite. The tuffs are mostly of airfall origin and of rhyolitic or probable rhyolitic composition and generally contain negligible percentages of crystal and lithic fragments. Two specimens are tuffaceous sedimentary rocks, and two are ash-flow tuffs. The tuffs range in age from early Pliocene or late Miocene to Oligocene. Some were deposited in lacustrine or playa environments; others were deposited in freshwater alluvial environments. All the beds examined in the lower Miocene and older formations have been zeolitized. Zeolitization of beds in younger formations depends on the environment of deposition. Zeolitized tuffs that contain at least 80 percent zeolite and are in beds more than one-third meter thick are considered potentially minable.

Arizona↗
USGS2020

Final project memorandum: Southeast Climate Adaptation Science Center Project

Low-lying public lands along the northern Gulf of Mexico coast are vulnerable to sea-level rise. Coastal planners and resource managers in the region have requested customized information that can be used to concisely communicate local sea-level rise scenarios and identify potential impacts to the missions of management agencies. In this project, researchers worked with the Northern Gulf of Mexico Sentinel Site Cooperative to develop information sheets outlining potential sea-level rise scenarios for the region through 2100 including their potential impact on the missions of federally-managed lands. Researchers drew from existing information on regional and global sea-level rise scenarios to develop customized information sheets for 54 federally-managed lands in the region (e.g., National Wildlife Refuges, National Park Service lands, National Estuarine Research Reserves) (Chivoiu et al. 2020). This project was developed in response to a request for customized sea-level rise scenario products from partners at the Northern Gulf of Mexico Sentinel Site Cooperative and the U.S. Fish and Wildlife Service’s Gulf Restoration Program. The results of this project support the conservation stewardship missions of the U.S. Fish and Wildlife Service and National Park Service by providing science to inform management of their lands along the Gulf of Mexico.

Alabama, Florida, Louisiana, Mississippi, Texas↗
USGS2013

Digital database of the Holocene tephras of the Mono-Inyo Craters, California

This digital product comprises a collection of age and isopach data for the Holocene tephras of the Mono-Inyo Craters, California. Data on the most recent eruptions from this volcanic chain are relatively comprehensive, getting less so the further back in time. For the most recent eruptions to about 1,500 years ago, tephra beds within separate eruptive sequences have been studied and isopached. Before this, from about 2,000 years ago to about 5,000 years ago, there are insufficient data for isopaching. However, one isolated tephra of about 9,000 years ago was studied and isopached in detail. Regarding ages, there are many tens of radiocarbon ages that have been obtained on the Holocene Mono-Inyo volcanic products. The vast majority of these radiocarbon dates are associated with tephras at locales that can be considered distal (basically where the primary tephra is less than several centimeters (cm) thick). These dates represent carbon that was sequestered perhaps within several hundred years of the eruption but do not represent the ages of separate eruptive pulses. There are two reasons for this. In some cases, it is clear that the dated material is not associated with the eruption products. This is the case in some lake strata where carbon is either not physically close to a given tephra layer or where an age for a tephra layer was obtained by interpolation assuming a sedimentation rate. In other cases, it is not clear that a given tephra layer represents a primary tephra; in such cases the layer could instead be redeposited. At most distal localities (beyond about 5 kilometers (km) from the chain), there was no record made of whether tephra was primary or redeposited, and at these distances where tephra is thin, it is generally redeposited during later events such as fires or thunderstorms. These age data are not appropriate for use in dating the eruptive history of the volcanic chain, and are therefore not included in the present contribution. The carbon age data in the present contribution were obtained by careful consideration of the material being collected. In the best instances, carbon was collected from new growth on plants that were probably killed by an eruption event through burning and burial. Slightly poorer data were collected from burned and buried forest duff that is renewed frequently. Finally, some dates for older Holocene tephra layers at Black Lake, Nevada, downwind of the Mono-Inyo Craters, appear to allow correlation of the layers to proximal occurrences. In cases where these poorer data were collected but yielded ages statistically indistinguishable from better data, the poorer data were included in the analysis. In the most difficult cases, usually the furthest back in time, poorer data that were nevertheless statistically indistinguishable were weighted together to generate the age estimate. There are some known Holocene eruptions from the Mono-Inyo Craters that are not included in this tabulation, as so far a tephra has not been associated with the eruptions. A good example of this is the Java blocks. The Java block eruption, from a vent underlying the northwestern corner of Negit Island in Mono Lake, expelled numerous blocks that were rafted within the lake and that are mostly deposited on the southwestern and northern lakeshore. No tephra that can be correlated to this deposit has been found, and therefore the eruption is not included in this tabulation.

California↗
USGS2013

Remote sensing survey of Chinese tallow tree in the Toledo Bend Reservoir area, Louisiana and Texas

We applied Hyperion sensor satellite data acquired by the National Aeronautics and Space Administration’s Earth Observing-1 (EO-1) satellite in conjunction with reconnaissance surveys to map the occurrences of the invasive Chinese tallow tree (Triadica sebifera) in the Toledo Bend Reservoir study area of northwestern Louisiana and northeastern Texas. The rationale for application of high spectral resolution EO-1 Hyperion data was based on the successful use of Hyperion data in the mapping of Chinese tallow tree in southwestern Louisiana in 2005. In contrast to the single Hyperion image used in the 2005 project, more than 20 EO-1 Hyperion and Advanced Land Imager (ALI) images of the study area were collected in 2009 and 2010 during the fall senescence when Chinese tallow tree leaves turn red. Atmospherically corrected reflectance spectra of Hyperion imagery collected at ground and aerial observation locations provided the input datasets used in the program for spectral discrimination analysis. Discrimination analysis was used to identify spectral indicator sets to best explain variance contained in the input databases. The expectation was that at least one set of Hyperion-based indicator spectra would uniquely identify occurrences of red-leaf Chinese tallow tree; however, no combination of Hyperion-based reflectance datasets produced a unique identifier. The inability to discover a unique spectral indicator resulted primarily from relatively sparse coverage by red-leaf Chinese tallow tree within the study area (percentage of coverage was less than 5 percent per 30- by 30-meter Hyperion pixel). To enhance the performance of the spectral discrimination analysis, leaf and canopy spectra of Chinese tallow tree were added to the input datasets to guide the indicator selection. In addition, input databases were segregated by land class obtained from an ALI-based landcover classification in order to reduce the input variance and to promote spectral discrimination of red-leaf Chinese tallow tree. Although no unique spectral identifier for red-leaf Chinese tallow tree was uncovered with these enhanced methods, in some cases predicted spatial patterns throughout the Hyperion images revealed alignment with vegetation associations within each land class that was often observed to contain Chinese tallow trees. These instances were associated particularly with the addition of helicopter-based spectra to the input databases. It was attempted to extend such predictions of likely occurrences of Chinese tallow tree by mapping six of the nine Hyperion swaths and four of the nine land classes, but this attempt produced uncertain results that could not be fully evaluated for accuracy. Even though the final mapping showed promise in identifying likely Chinese tallow tree occurrences, the low percentage of occurrences hindered mapping performance and validation. Results of the mapping suggested that successful detection of Chinese tallow tree in the study area would require a spectral sensor similar to the Hyperion but with a higher ground-level spatial resolution. Although the Hyperion-based spectral mapping did not provide the desired results, the associated field (ground and aerial) surveys did provide for a qualitative assessment of the overall Chinese tallow tree distribution within the study area. Ground and aerial surveys suggested that Chinese tallow tree occurrences were uncommon and were without an observed pattern in relation to proximity to the Toledo Bend Reservoir. Although uncommon and scattered, Chinese tallow trees and shrubs most commonly existed along forest edges, water edges, and fence lines, probably most in line with seed dispersal by birds. Chinese tallow trees were observed to be more densely dispersed within some scrublands and grasslands than were observed in pine, hardwood, and mixed forests.

Louisiana;Texas↗
USGS2015

Depth-dependent groundwater quality sampling at City of Tallahassee test well 32, Leon County, Florida, 2013

Public-supply wells sometimes produce water of less than desirable quality because contaminants can migrate to the open interval of wells through preferential pathways. If these pathways can be identified, zones that produce poor quality water can be excluded during the well-construction process. The U.S. Geological Survey has developed geophysical testing methods that can be used to delineate zones of high permeability in test wells. Once the highly permeable zones are identified, water-quality data can be collected from each zone to identify whether any of the zones produce water of poor quality. The zones producing poor quality water can then be cased off in the final well design so that they do not contribute flow to the production well, reducing subsequent water-treatment costs. A test well was drilled by the City of Tallahassee to assess the suitability of the site for the installation of a new well for public water supply. The test well is in Leon County in north-central Florida. The U.S. Geological Survey delineated high-permeability zones in the Upper Floridan aquifer, using borehole-geophysical data collected from the open interval of the test well. A composite water sample was collected from the open interval during high-flow conditions, and three discrete water samples were collected from specified depth intervals within the test well during low-flow conditions. Water-quality, source tracer, and age-dating results indicate that the open interval of the test well produces water of consistently high quality throughout its length. The cavernous nature of the open interval makes it likely that the highly permeable zones are interconnected in the aquifer by secondary porosity features.

Florida↗
USGS2008

Regression Analysis of Stage Variability for West-Central Florida Lakes

The variability in a lake's stage depends upon many factors, including surface-water flows, meteorological conditions, and hydrogeologic characteristics near the lake. An understanding of the factors controlling lake-stage variability for a population of lakes may be helpful to water managers who set regulatory levels for lakes. The goal of this study is to determine whether lake-stage variability can be predicted using multiple linear regression and readily available lake and basin characteristics defined for each lake. Regressions were evaluated for a recent 10-year period (1996-2005) and for a historical 10-year period (1954-63). Ground-water pumping is considered to have affected stage at many of the 98 lakes included in the recent period analysis, and not to have affected stage at the 20 lakes included in the historical period analysis. For the recent period, regression models had coefficients of determination (R2) values ranging from 0.60 to 0.74, and up to five explanatory variables. Standard errors ranged from 21 to 37 percent of the average stage variability. Net leakage was the most important explanatory variable in regressions describing the full range and low range in stage variability for the recent period. The most important explanatory variable in the model predicting the high range in stage variability was the height over median lake stage at which surface-water outflow would occur. Other explanatory variables in final regression models for the recent period included the range in annual rainfall for the period and several variables related to local and regional hydrogeology: (1) ground-water pumping within 1 mile of each lake, (2) the amount of ground-water inflow (by category), (3) the head gradient between the lake and the Upper Floridan aquifer, and (4) the thickness of the intermediate confining unit. Many of the variables in final regression models are related to hydrogeologic characteristics, underscoring the importance of ground-water exchange in controlling the stage of karst lakes in Florida. Regression equations were used to predict lake-stage variability for the recent period for 12 additional lakes, and the median difference between predicted and observed values ranged from 11 to 23 percent. Coefficients of determination for the historical period were considerably lower (maximum R2 of 0.28) than for the recent period. Reasons for these low R2 values are probably related to the small number of lakes (20) with stage data for an equivalent time period that were unaffected by ground-water pumping, the similarity of many of the lake types (large surface-water drainage lakes), and the greater uncertainty in defining historical basin characteristics. The lack of lake-stage data unaffected by ground-water pumping and the poor regression results obtained for that group of lakes limit the ability to predict natural lake-stage variability using this method in west-central Florida.

Scientific Investigations Report↗