SEARCH · USGS Science

Results for “Trace Elements Investigations”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources

USGS2000

Ground-water quality in the Appalachian Plateaus, Kanawha River basin, West Virginia

Water samples collected from 30 privately-owned and small public-supply wells in the Appalachian Plateaus of the Kanawha River Basin were analyzed for a wide range of constituents, including bacteria, major ions, nutrients, trace elements, radon, pesticides, and volatile organic compounds. Concentrations of most constituents from samples analyzed did not exceed U.S. Environmental Protection Agency (USEPA) standards. Constituents that exceeded drinking-water standards in at least one sample were total coliform bacteria, Escherichia coli (E. coli) , iron, manganese, and sulfate. Total coliform bacteria were present in samples from five sites, and E. coli were present at only one site. USEPA secondary maximum contaminant levels (SMCLs) were exceeded for three constituents -- sulfate exceeded the SMCL of 250 mg/L (milligrams per liter) in samples from 2 of 30 wells; iron exceeded the SMCL of 300 µg/L (micrograms per liter) in samples from 12 of the wells, and manganese exceeded the SMCL of 50 µg/L in samples from 17 of the wells sampled. None of the samples contained concentrations of nutrients that exceeded the USEPA maximum contaminant levels (MCLs) for these constituents. The maximum concentration of nitrate detected was only 4.1 mg/L, which is below the MCL of 10 mg/L. Concentrations of nitrate in precipitation and shallow ground water are similar, potentially indicating that precipitation may be a source of nitrate in shallow ground water in the study area. Radon concentrations exceeded the recently proposed maximum contaminant level of 300 pCi/L at 50 percent of the sites sampled. The median concentration of radon was only 290 pCi/L. Radon-222 is a naturally occurring, carcinogenic, radioactive decay product of uranium. Concentrations, however, did not exceed the alternate maximum contaminant level (AMCL) for radon of 4,000 pCi/L in any of the 30 samples. Arsenic concentrations exceeded the proposed MCL of 5µg/L at 4 of the 30 sites. No samples exceeded the current MCL of 50 µg/L. Neither pesticides nor volatile organic compounds (VOCs) were prevalent in the study area, and the concentrations of the compounds that were detected did not exceed any USEPA MCLs. Pesticides were detected in only two of the 30 wells sampled, but four pesticides -- atrazine, carbofuran, DCPA, and deethylatrazine -- were detected in one well; molinate was detected in the other well. All of the pesticides detected were at estimated concentrations of only 0.002 µg/L. Of the VOCs detected, trihalomethane compounds (THMs), which can result from chlorination of a well, were the most common. THMs were detected in 13 of the 30 wells sampled. Gasoline by-products, such as benzene, toluene, ethylbenzene and xylene (BTEX compounds) were detected in 10 of the 30 wells sampled. The maximum concentration of any of the VOCs detected in this study, however, was only 1.040 µg/L, for the THM dichlorofluoromethane. Water samples from 25 of the wells were analyzed for chlorofluorocarbons (CFCs) to estimate the apparent age of ground water. The analyses indicated that age of water ranged from 10 to greater than 57 years, and that the age of ground water could be correlated with the topographic setting of the wells sampled. Thus the apparent age of water in wells on hilltops was youngest (median of 13 years) and that of water in wells in valleys was oldest (median of 42 years). Water from wells on hillsides was intermediate in age (median of 29 years). These data can be used to define contributing areas to wells, corroborate or revise conceptual ground-water flow models, estimate contaminant travel times from spills to other sources such as nearby domestic or public supply wells, and to manage point and nonpoint source activities that may affect critical aquifers.

West Virginia↗

USGS2009

Ground-Water Temperature, Noble Gas, and Carbon Isotope Data from the Espanola Basin, New Mexico

Ground-water samples were collected from 56 locations throughout the Espanola Basin and analyzed for general chemistry (major ions and trace elements), carbon isotopes (delta 13C and 14C activity) in dissolved inorganic carbon, noble gases (He, Ne, Ar, Kr, Xe, and 3He/4He ratio), and tritium. Temperature profiles were measured at six locations in the southeastern part of the basin. Temperature profiles suggest that ground water generally becomes warmer with distance from the mountains and that most ground-water flow occurs at depths <250 m below ground surface. The two dominant water types in the basin are Ca/CO3+HCO3 and Na/CO3+HCO3, followed by mixed-cation/CO3+HCO3. Waters generally evolve from Ca/CO3+HCO3 to Na/CO3+HCO3 with increasing residence time through Ca-Na cation exchange with clay minerals. Basin ground water can be divided into four hydrochemical zones based on chemical and isotopic composition: West, Southeast, Northeast, and Central Deep. Hydrochemical zone boundaries are roughly correlated with contacts between geologic units or lithosome transitions within the Tesuque Formation. Geochemical mass-transfer modeling was performed using NETPATH and 14C ages were adjusted accordingly. Isotopic input parameters were varied within reasonable limits to assess uncertainty in the adjusted 14C ages. For each sample, a preferred adjusted age was selected from multiple possible adjusted ages based primarily on the fit between measured and modeled delta 13C values. The range of possible age adjustments for most samples is about 6,000 years or less, indicating that the preferred adjusted age for most samples has a total range of uncertainty of <6,000 years. Preferred adjusted ages range from 0 to 35,400 years. First-order trends in the age distribution include older ages generally occurring farther from rivers on the east side of the basin and farther from the mountains, consistent with both mountain-front recharge and recharge on the basin floor in the form of stream-loss and arroyo recharge. Ages also increase with depth in the Southeast zone, the only area where discrete-depth samples could be collected. Recharge temperatures derived from noble gas concentrations were used in conjunction with an empirically derived local relationship between recharge temperature and elevation to constrain recharge elevation and to estimate fractions of mountain-block recharge (MBR) in sampled waters of Holocene age. Noble gas recharge temperatures indicate that ground water in the Southeast zone contains a significant fraction of MBR, commonly 20-50 percent or more. The same is apparently true for the Northeast zone, though only two data points could be used to evaluate the MBR fraction in this area. Recharge temperatures indicate that the upper 30 m of the regional aquifer on the Pajarito Plateau typically contain little or no MBR. Tritium concentrations and apparent 3H/3He ages indicate that water in the mountain block is dominantly <50 years old, and water in the basin-fill is dominantly >50 years old, consistent with the 14C ages. Terrigenic He (Heterr) concentrations in ground water are high (log Delta Heterr of 2 to 5) throughout much of the basin. High Heterr concentrations are probably caused by in situ production in the Tesuque Formation from locally high concentrations of U-bearing minerals (Northeast zone only), or by upward diffusive/advective transport of crustal- and mantle-sourced He possibly enhanced by basement piercing faults, or by both. The 3He/4He ratio of Heterr (Rterr) is commonly high (Rterr/Ra of 0.3-2.0, where Ra is the 3He/4He ratio in air) suggesting that Espanola Basin ground water commonly contains mantle-sourced He. The 3He/4He ratio of Heterr is generally the highest in the western and southern parts of the basin, closest to the western border fault system and the Quaternary to Miocene volcanics of the Jemez Mountains and Cerros del Rio.

Scientific Investigations Report↗

USGS2007

Selenium and other elements in water and adjacent rock and sediment of Toll Gate Creek, Aurora, Arapahoe County, Colorado, December 2003 through March 2004

Streamwater and solid samples (rock, unconsolidated sediment, stream sediment, and efflorescent material) in the Toll Gate Creek watershed, Colorado, were collected and analyzed for major and trace elements to determine trace-element concentrations and stream loads from December 2003 through March 2004, a period of seasonally low flow. Special emphasis was given to selenium (Se) concentrations because historic Se concentrations exceeded current (2004) stream standards. The goal of the project was to assess the distribution of Se concentration and loads in Toll Gate Creek and to determine the potential for rock and unconsolidated sediment in the basin to be sources of Se to the streamwater. Streamwater samples and discharge measurements were collected during December 2003 and March 2004 along Toll Gate Creek and its two primary tributaries - West Toll Gate Creek and East Toll Gate Creek. During both sampling periods, discharge ranged from 2.5 liters per second to 138 liters per second in the watershed. Discharge was greater in March 2004 than December 2003, but both periods represent low flow in Toll Gate Creek, and results of this study should not be extended to periods of higher flow. Discharge decreased moving downstream in East Toll Gate Creek but increased moving downstream along West Toll Gate Creek and the main stem of Toll Gate Creek, indicating that these two streams gain flow from ground water. Se concentrations in streamwater samples ranged from 7 to 70 micrograms per liter, were elevated in the upstream-most samples, and were greater than the State stream standard of 4.6 micrograms per liter. Se loads ranged from 6 grams per day to 250 grams per day, decreased in a downstream direction along East Toll Gate Creek, and increased in a downstream direction along West Toll Gate Creek and Toll Gate Creek. The largest Se-load increases occurred between two sampling locations on West Toll Gate Creek during both sampling periods and between the two sampling locations on the main stem of Toll Gate Creek during the December 2003 sampling. These load increases may indicate that sources of Se exist between these two locations; however, Se loading along West Toll Gate Creek and Toll Gate Creek primarily was characterized by gradual downstream increases in load. Linear regressions between Se load and discharge for both sampling periods had large, significant values of r2 (r2 > 0.96, p < 0.0001) because increases in Se load (per unit of flow increase) were generally constant. This relation is evidence for a constant addition of water having a relatively constant Se concentration over much of the length of Toll Gate Creek, a result which is consistent with a ground-water source for the Se loads. Rock outcroppings along the stream were highly weathered, and Se concentrations in rock and other solid samples ranged from below detection (1 part per million) to 25 parts per million. One sample of efflorescence (a surface encrustation produced by evaporation) had the greatest selenium concentration of all solid samples, was composed of thenardite (sodium sulfate), gypsum (calcium sulfate) and minor halite (sodium chloride), and released all of its Se during a 30-minute water-leaching procedure. Calculations indicate there was an insufficient amount of this material present throughout the watershed to account for the observed Se load in the stream. However, this material likely indicates zones of ground-water discharge that contain Se. This report did not identify an unequivocal source of Se in Toll Gate Creek. However, multiple lines of evidence indicate that ground-water discharge supplies Se to Toll Gate Creek: (1) the occurrence of elevated Se concentrations in the stream throughout the watershed and in the headwater regions, upstream from industrial sources; (2) the progressive increase in Se loads moving downstream, which indicates a continuous input of Se along the stream rather than input from point sources; (3) the occurr

Colorado↗

USGS1952

Preliminary report on the White Canyon area, San Juan county, Utah

The White Canyon area, in the central part of San Juan County, Utah, consists of approximately two 15-minute quadrangles. Approximately 75 square miles have been mapped by the Geological Survey on a scale of 1 inch equals 1 mile, using a combined aerial photography-plane table method. Structure contours were drawn on top of the Organ Rock member of the Cutler formation. Parts of the Gonway and North Point claims, 1/4 mile east of the Happy Jack mine, were mapped in detail. The principal objectives of the investigations were: (1) to establish ore guides; (2) to select areas favorable for exploration; and (3) to map the general geology and to determine the regional relationships of the uranium deposits. The White Canyon area is comprised of sedimentary rocks of Carboniferous to Jurassic age, more than 2,000 feet thick, having a regional dip of 1° to 2° SW. The nearest igneous rocks are in the Henry Mountains about 7 miles west of the northern part of the area; The Shinarump conglomerate of the late Triassic age, the principal ore horizon in the White Canyon area, consists of lenticular beds of sandstone, conglomeratic sandstone, conglomerate, clay, and siltstone. The Shinarump conglomerate, absent in places, is as much as 75 feet thick. The sandstones locally contain molds of logs and fragments of altered volcanic ash. Some of the logs have been replaced by copper and uranium minerals and iron oxides. The clay and siltstone underlie and are interbedded with the sandstone, and are most common in channels that cut into the underlying Moenkopi formation. The Shinarump conglomerate contains reworked Moenkopi siltstone fragments, clay balls, carbonized wood, and pebbles of quarts, quartzite, and chert. Jointing is prominent in the Western part of the mapped area. The three most prominent joint trends are due east, N. 65°-75° W., and N. 65°-75° E. All joints have vertical dips. The red beds are bleached along some joints, especially those that trend N. 65°-75° W. All uranium ore produced has been from the lower part of the Shinarump conglomerate, where it commonly occurs with copper as disseminations and fracture coatings in sandstone. Uranium and copper minerals also occur in low-grade disseminated deposits in the lower Chinle and in the Moenkopi formation and in veins cutting these formations. Although some uranium deposits occur in Chinarump channels and scours, copper and uranium minerals along fractures suggest that channel control may be secondary. Logs and clay balls apparently have exerted some chemical influences for deposition. The uranium occurs as the oxide in some deposits, and as secondary hydrous sulfates, phosphates, oxides, and silicates in these and several other deposits. Charcoal, iron and manganese oxides, and veinlets of hydrocarbon are abnormally radioactive in most of the deposits. Base-metal sulfides are commonly found inside the oxidized zone. Secondary copper minerals include the hydrous sulfates and carbonate. Gangue minerals include quarts, clay minerals, and manganese oxides, dickite (?), calcite, gypsum, pyrite, and chalcedony (?). Principal wall-rock alteration appears to have been silicification, clay alteration, and bleaching. Most of the shipped ore has contained more than 0.3 percent uranium. The ore also contains copper, commonly in grades lower than 1.0 percent. Criteria believed to be most useful for prospecting for concealed uranium deposits are (1) visible uranium minerals; (2) sulfide minerals; (3) secondary copper minerals; (4) dickite (?); (5) hydrocarbons; and (6) bleaching and alteration of the Moenkopi formation.

Utah↗

USGS2002

Effects of highway-deicer application on ground-water quality in a part of the Calumet Aquifer, northwestern Indiana

The effects of highway-deicer application on ground-water quality were studied at a site in northwestern Indiana using a variety of geochemical indicators. Site characteristics such as high snowfall rates; large quantities of applied deicers; presence of a high-traffic highway; a homogeneous, permeable, and unconfined aquifer; a shallow water table; a known ground-water-flow direction; and minimal potential for other sources of chloride and sodium to complicate source interpretation were used to select a study area where ground water was likely to be affected by deicer application. Forty-three monitoring wells were installed in an unconfined sand aquifer (the Calumet aquifer) near Beverly Shores in northwestern Indiana. Wells were installed along two transects that approximately paralleled groundwater flow in the Calumet aquifer and crossed US–12. US–12 is a highway that receives Indiana’s highest level of maintenance to maintain safe driving conditions. Ground-water quality and water-level data were collected from the monitoring wells, and precipitation and salt-application data were compiled from 1994 through 1997. The water-quality data indicated that chloride was the most easily traced indicator of highway deicers in ground water. Concentration ratios of chloride to iodide and chloride to bromide and Stiff diagrams of major element concentrations indicated that the principal source of chloride and sodium in ground water from the uppermost one-third to one-half of the Calumet aquifer and downgradient from US–12 was from a halite highway-deicer source. Borehole logs of relative electromagnetic conductivity defined a distinct plume of deicer-affected water in the uppermost 8 feet of aquifer at about 9 feet horizontally from the paved roadway edge and a zone of higher conductivity than background in the lower one-third of the aquifer. Chloride and sodium in the deep parts of the aquifer originated from natural sources. Chloride and sodium from highway deicers were present in the aquifer throughout the year. The highest concentrations of chloride and sodium in ground water were determined in samples collected during the spring and summer from wells open to the water table within about 9 feet of the highway. Chloride concentrations in ground water that were attributable to highway deicers also were found in tested wells about 400 feet downgradient from US–12 during the fall and winter and at greater depths than in wells closer to US–12. Chloride concentrations exceeded the U.S. Environmental Protection Agency’s (USEPA) secondary maximum contaminant level of 250 milligrams per liter for drinking water at seven wells downgradient from the highway during late winter, spring, and summer samplings. The chloride standard was exceeded only in water from wells with total depths that are less than about 10 feet below land surface. Sodium concentrations in water periodically exceeded the USEPA drinking-water equivalency level of 20 milligrams per liter in both the uppermost (deicer 2 Effects of Highway-Deicer Application on Ground-Water Quality in a Part of the Calumet Aquifer, Northwestern Indiana affected) and lower one-thirds of the aquifer. Sodium concentrations in ground water downgradient from US–12 and in the upper 5 feet of the aquifer also occasionally exceeded drinking-water standards for sodium (160 milligrams per liter) as set by the State of Florida and a standard for taste (200 milligrams per liter) as set by the World Health Organization. Dispersion was identified by analysis of aquifer-test data, isotopic dating of ground water, and water-quality data to be the process most responsible for reducing concentrations of highway deicers in the aquifer. Chemical analyses of the sand composing the aquifer indicated that cation exchange decreased the mass of deicerrelated sodium in ground water, although the sand has a limited capacity to sustain the process. Automated daily measurements of specific conductance, correlated to chloride concentrations, indicated that some deicer is retained in the aquifer near the highway throughout the entire year and acts as a continuous chloride source for ground water. Peak concentrations of deicerrelated constituents occasionally were detected by the daily, automated measurements of specific conductance that were made between the monthly samplings of ground water. Data analysis indicated that more frequent sampling than monthly intervals would be necessary if maximum chloride concentrations were to be measured. Some deicer may be retained in the aquifer and unsaturated zone between annual salt-application periods. Chloride concentrations at wells 1-DG-WT and 2-DG-WT remained greater than background through much or all of the year. The estimated masses of chloride transported in ground water past 2-DG in 1995 and 1996 were either slightly greater than (1995) or less than (1996) the masses of chloride applied to US–12 during the study.

Indiana↗

USGS2016

Arsenic and radionuclide occurrence and relation to geochemistry in groundwater of the Gulf Coast Aquifer System in Houston, Texas, 2007–11

The U.S. Geological Survey (USGS), in cooperation with the City of Houston, began a study in 2007 to determine concentrations, spatial extent, and associated geochemical conditions that might be conducive for mobility and transport of selected naturally occurring trace elements and radionuclides in the Gulf Coast aquifer system in Houston, Texas. Water samples were collected from 91 municipal supply wells completed in the Evangeline and Chicot aquifers of the Gulf Coast aquifer system in northeastern, northwestern, and southwestern Houston; hereinafter referred to as northeast, northwest and southwest Houston areas. Wells were sampled in three phases: (1) 28 municipal supply wells were sampled during 2007–8, (2) 60 municipal supply wells during 2010, and (3) 3 municipal supply wells during December 2011. During each phase of sampling, samples were analyzed for major ions, selected trace elements, and radionuclides. At a subset of wells, concentrations of arsenic species and other radionuclides (carbon-14, radium-226, radium-228, radon-222, and tritium) also were analyzed. Selected physicochemical properties were measured in the field at the time each sample was collected, and oxidation-reduction potential and unfiltered sulfides also were measured at selected wells. The source-water (the raw, ambient water withdrawn from municipal supply wells prior to water treatment) samples were collected for assessment of aquifer conditions in order to provide community water-system operators information that could be important when they make decisions about which treatment processes to apply before distributing finished drinking water. Geochemical conditions of groundwater of the Gulf Coast aquifer system are suitable in some instances for release of arsenic and radionuclides from aquifer materials. Recent changes to the U.S. Environmental Protection Agency (EPA) primary drinking-water regulations for arsenic and a selected number of natural radionuclides have highlighted the necessity for municipal supply system managers to be aware of the occurrence and distribution of these constituents in their source water. Concentrations of arsenic ranged from 0.58 to 23.5 micrograms per liter (μg/L), with relatively low median and 75th percentile concentrations (2.7 and 3.6 μg/L, respectively). The gross alpha-particle activity completed within 72 hours after sample collection ranged from R-1.1 (nondetect where the result was below the sample specific critical level) to 39.7 picocuries per liter (pCi/L), with a median of 10.3 pCi/L. After 30 days, the gross alpha-particle activities in the 91 samples ranged from R-0.94 to 25.5 pCi/L, with a median of 5.60 pCi/L. Concentrations of uranium ranged from less than 0.02 to 42.7 μg/L, with a median value of 1.69 μg/L and a 75th-percentile value of 6.48 μg/L. The maximum concentrations of radium-226 and combined radium (sum of radium-226 plus radium-228) were 4.34 pCi/L and 3.23 pCi/L, respectively. Aquifer major-ion geochemistry was characterized and shown to contain three chemical types of water as grouped by a simplified predominant cation and anion classification system: (1) calcium- bicarbonate type, (2) sodium-bicarbonate type, and (3) sodium-chloride type. Aquifer geochemistry also was characterized into four reduction-oxidation (redox) categories: (1) oxic, (2) suboxic, (3) mixed, and (4) anoxic. Within the anoxic category, groundwater was further characterized into four presumed predominant reduction processes: (1) iron or sulfate or both [Fe(III)/SO 4 ] reducing, (2) iron [Fe(III)] reducing, (3) iron and sulfate [Fe(III)-SO 4 ] reducing, or (4) methanogenic, as defined by composition of redox species. The oxic category was associated with calcium-bicarbonate-type water, and the methanogenic-anoxic process was associated exclusively with the sodium-bicarbonate-type water. The species of arsenic and the dominant radionuclide present were associated with specific redox categories. Arsenate was associated primarily with oxic water and did not exceed 3.5 µg/L, whereas arsenite was associated with iron-reducing, anoxic water samples and, at the highest concentrations, occurred in sulfate-reducing, anoxic; methanogenic-anoxic; or both water samples. Uranium was associated exclusively with the oxic water, whereas the highest concentrations of combined radium were associated with the iron-reducing, anoxic water. The gross alpha-particle activity was greatest in the oxic waters where the source of the radioactivity was the uranium. Associated geochemical conditions conducive for mobility of arsenic and radionuclides and their spatial and vertical extent in the Gulf Coast aquifer system in Houston are important aspects to the areal management of the municipal groundwater supplies in Houston. Ongoing research is seeking to define chemical or geological factors that are the optimal indicators for elevated concentrations of these naturally occurring constituents.

Texas↗

USGS1999

Characterization of selected biological, chemical, and physical conditions at fixed sites in the Upper Colorado River Basin, Colorado, 1995-98

Biological community samples were collected at 15 sites in the Upper Colorado River Basin (UCOL) in Colorado as part of the National Water-Quality Assessment (NAWQA) Program. Sites sampled in two physiographic provinces, the Southern Rocky Mountains and the Colorado Plateau, represented agriculture, mining, urban and recreation, and mixed land uses and background conditions. Nine measures of water quality, which include information on nutrients, specific conductance (a surrogate for salinity), trace elements in streambed sediment, pesticides in fish tissue, fish communities, and macroinvertebrate richness and composition and stream habitat were used for comparisons among sites within the two physiographic provinces. Sampling sites from three other NAWQA study units—the Rio Grande Valley, the South Platte River Basin, and the Upper Snake River Basin study units—were categorized on the basis of land use and stream size in order to develop a larger data set for comparison to sites in the UCOL. Three categories of land use—forested (includes mining, urban and recreation, and background), agriculture, and mixed—were used for comparison to the UCOL fixed sites. Results indicated that all sites other than the Colorado River below Baker Gulch (a background site) showed some water-quality characteristics to be significantly affected. Results indicated that the concentrations of cadmium and zinc in streambed sediment at mining land-use sites in the Southern Rocky Mountains physiographic province generally were orders of magnitude higher than streambed-sediment concentrations at the background site. Streambed-sediment concentrations at mining land-use sites in the UCOL were greater than the 75 th percentile of concentrations from sites in the three other NAWQA study units. Fish communities and habitat conditions were degraded at mining land-use sites compared to the background site. Ephemeroptera, Plecoptera, and Trichoptera (EPT) richness and the percentage of EPT were lower at mining land-use sites than at the background site and were less than the 50 th percentile of those for sites from the three other NAWQA study units. Nutrient concentrations at urban and recreation sites in the Southern Rocky Mountain physiographic province generally were greater than concentrations at the background site and generally were between the 25 th and 90 th percentile of concentrations for sites from the three other NAWQA study units. Habitat conditions and fish communities at urban and recreation sites were slightly degraded compared to the background site. EPT richness and the percentage of EPT were lower at urban and recreation sites than at the background site and were between the 25 th and 75 th percentile of those for sites from the three other NAWQA study units. The percentage of Chironomidae, which may be indicative of pollutant-tolerant organisms, was higher at urban and recreation sites than at the background site. Mixed land-use sites in the Southern Rocky Mountains physiographic province had similar nutrient concentrations and similar cadmium and zinc streambed-sediment concentrations. Fish-community degradation index values were very different among the three mixed land-use sites in the Southern Rocky Mountains physiographic province. Larger percentages of omnivores and anomalies such as lesions and deformities at two mixed land-use sites resulted in higher degradation values of the fish community. Agriculture land-use sites had higher concentrations of nutrients and selenium than the background site in the Colorado Plateau physiographic province. Concentrations of p,p '-DDE in fish tissue at agriculture sites were higher than the 75 th percentile of concentrations for sites from the three other NAWQA study units. Fish communities had degradation values near the 75 th percentile for agriculture sites. The percentage of EPT was low at agriculture sites when compared to the background site. Two mixed land-use sites in the Colorado Plateau physiographic province had similar concentrations of nutrients, selenium, and p,p '-DDE, and similar EPT richness and composition. These two sites were located downstream from agricultural and urban activities. Some water-quality measures at these two sites indicated degradation compared to a mixed land-use site upstream from most of the agriculture and urban activities in the Colorado Plateau physiographic province.

Colorado↗

USGS2007

Vertical gradients in water chemistry and age in the Northern High Plains Aquifer, Nebraska, 2003

The northern High Plains aquifer is the primary source of water used for domestic, industrial, and irrigation purposes in parts of Colorado, Kansas, Nebraska, South Dakota, and Wyoming. Despite the aquifer’s importance to the regional economy, fundamental ground-water characteristics, such as vertical gradients in water chemistry and age, remain poorly defined. As part of the U.S. Geological Survey’s National Water-Quality Assessment Program, water samples from nested, short-screen monitoring wells installed in the northern High Plains aquifer were analyzed for major ions, nutrients, trace elements, dissolved organic carbon, pesticides, stable and radioactive isotopes, dissolved gases, and other parameters to evaluate vertical gradients in water chemistry and age in the aquifer. Chemical data and tritium and radiocarbon ages show that water in the aquifer was chemically and temporally stratified in the study area, with a relatively thin zone of recently recharged water (less than 50 years) near the water table overlying a thicker zone of older water (1,800 to 15,600 radiocarbon years). In areas where irrigated agriculture was an important land use, the recently recharged ground water was characterized by elevated concentrations of major ions and nitrate and the detection of pesticide compounds. Below the zone of agricultural influence, major-ion concentrations exhibited small increases with depth and distance along flow paths because of rock/water interactions. The concentration increases were accounted for primarily by dissolved calcium, sodium, bicarbonate, sulfate, and silica. In general, the chemistry of ground water throughout the aquifer was of high quality. None of the approximately 90 chemical constituents analyzed in each sample exceeded primary drinking-water standards. Mass-balance models indicate that changes in groundwater chemistry along flow paths in the aquifer can be accounted for by small amounts of feldspar and calcite dissolution; goethite and clay-mineral precipitation; organic-carbon and pyrite oxidation; oxygen reduction and denitrification; and cation exchange. Mixing with surface water affected the chemistry of ground water in alluvial sediments of the Platte River Valley. Radiocarbon ages in the aquifer, adjusted for carbon mass transfers, ranged from 1,800 to 15,600 14C years before present. These results have important implications with respect to development of ground-water resources in the Sand Hills. Most of the water in the aquifer predates modern anthropogenic activity so excessive removal of water by pumping is not likely to be replenished by natural recharge in a meaningful timeframe. Vertical gradients in ground-water age were used to estimate long-term average recharge rates in the aquifer. In most areas, the recharge rates ranged from 0.02 to 0.05 foot per year. The recharge rate was 0.2 foot per year in one part of the aquifer characterized by large downward hydraulic gradients. Nitrite plus nitrate concentrations at the water table were 0.13 to 3.13 milligrams per liter as nitrogen, and concentrations substantially decreased with depth in the aquifer. Dissolved-gas and nitrogen-isotope data indicate that denitrification in the aquifer removed 0 to 97 percent (average = 50 percent) of the nitrate originally present in recharge. The average amount of nitrate removed by denitrification in the aquifer north of the Platte River (Sand Hills) was substantially greater than the amount removed south of the river (66 as opposed to 0 percent), and the extent of nitrate removal appears to be related to the presence of thick deposits of sediment on top of the Ogallala Group in the Sand Hills that contained electron donors, such as organic carbon and pyrite, to support denitrification. Apparent rates of dissolved-oxygen reduction and denitrification were estimated on the basis of decreases in dissolved-oxygen concentrations and increases in concentrations of excess nitrogen gas and ground-water ages along flow paths from the water table to deeper wells. Median rates of dissolved-oxygen reduction and denitrification south of the Platte River were at least 10 times smaller than the median rates north of the river in the Sand Hills. The relatively large denitrification rates in the Sand Hills indicate that the aquifer in that area may have a greater capacity to attenuate nitrate contamination than the aquifer south of the river, depending on rates of ground-water movement in the two areas. Small denitrification rates south of the river indicate that nitrate contamination in that part of the aquifer would likely persist for a longer period of time.

Nebraska↗

USGS2014

Watershed characteristics and water-quality trends and loads in 12 watersheds in Gwinnett County, Georgia

The U.S. Geological Survey, in cooperation with Gwinnett County Department of Water Resources, established a Long-Term Trend Monitoring (LTTM) program in 1996. The LTTM program is a comprehensive, long-term, water-quantity and water-quality monitoring program designed to document and analyze the hydrologic and water-quality conditions of selected watersheds of Gwinnett County, Georgia. Water-quality monitoring initially began in six watersheds and was expanded to another six watersheds in 2001. As part of the LTTM program, streamflow, precipitation, water temperature, specific conductance, and turbidity were measured continuously at the 12 watershed monitoring stations for water years 2004–09. In addition, discrete water-quality samples were collected seasonally from May through October (summer) and November through April (winter), including one base-flow and three stormflow event composite samples, during the study period. Samples were analyzed for nutrients (nitrogen and phosphorus), total organic carbon, trace elements (total lead and total zinc), total dissolved solids, and total suspended sediment (total suspended solids and suspended-sediment concentrations). The sampling scheme was designed to identify variations in water quality both hydrologically and seasonally. The 12 watersheds were characterized for basin slope, population density, land use for 2009, and the percentage of impervious area from 2000 to 2009. Precipitation in water years 2004–09 was about 18 percent below average, and the county experienced exceptional drought conditions and below average runoff in water years 2007 and 2008. Watershed water yields, the percentage of precipitation that results in runoff, typically are lower in low precipitation years and are higher for watersheds with the highest percentages of impervious areas. A comparison of base-flow and stormflow water-quality samples indicates that turbidity and concentrations of total ammonia plus organic nitrogen, total nitrogen, total phosphorus, total organic carbon, total lead, total zinc, total suspended solids, and suspended-sediment concentrations increased with increasing discharge at all watersheds. Specific conductance, however, decreased during stormflow at all watersheds, and total dissolved solids concentrations decreased during stormflow at a few of the watersheds. Total suspended solids and suspended-sediment concentrations typically were two orders of magnitude higher in stormflow samples, turbidities were about 1.5 orders of magnitude higher, total phosphorus and total zinc were about one order of magnitude higher, and total ammonia plus organic nitrogen, total nitrogen, total organic carbon, and total lead were about twofold higher than in base-flow samples. Seasonal patterns and long-term trends in flow-adjusted water-quality concentrations were identified for five representative constituents—total nitrogen, total phosphorus, total zinc, total dissolved solids, and total suspended solids. Seasonal patterns for all five constituents were fairly similar, with higher concentrations in the summer and lower concentrations in the winter. Significant linear long-term trends in stormflow composite concentrations were identified for 36 of the 60 constituent-watershed combinations (5 constituents multiplied by 12 watersheds) for the period of record through water year 2011. Significant trends typically were decreasing for total nitrogen, total phosphorus, total suspended solids, and total zinc and increasing for total dissolved solids. Total dissolved solids and total suspended solids trends had the largest magnitude changes per year. Stream water loads were estimated for 10 water-quality constituents. These estimates represent the cumulative effects of watershed characteristics, hydrologic processes, biogeochemical processes, climatic variability, and human influences on watershed water quality. Yields, in load per unit area, were used to compare loads from watersheds with different sizes. A load estimation approach developed for the Gwinnett County LTTM program that incorporates storm-event composited samples was used with some minor modifications. This approach employs the commonly used regression-model method. Concentrations were modeled as a function of discharge, time, season, and turbidity to improve model predictions and reduce errors in load estimates. Total suspended solids annual loads have been identified in Gwinnett County’s Watershed Protection Plan for target performance criterion. The amount of annual runoff is the primary factor in determining the amount of annual constituent loads. Below average runoff during water years 2004–09, especially during water years 2006–08, resulted in corresponding below average loads. Variations in constituent yields between watersheds appeared to be related to various watershed characteristics. Suspended sediment (total suspended solids and suspended-sediment concentrations) along with constituents transported predominately in solid phase (total phosphorus, total organic carbon, total lead, and total zinc) and total dissolved solids typically had higher yields from watersheds that had high percentages of impervious areas or high basin slope. High total nitrogen yields were also associated with watersheds with high percentages of impervious areas. Low total nitrogen, total suspended solids, total lead, and total zinc yields appear to be associated with watersheds that have a low percentage of high-density development. Total suspended solids yields were lower in drought years, water years 2007–08, from the combined effects of less runoff and the result of fewer, lower magnitude storms, which likely resulted in less surface erosion and lower stream sediment transport.

Georgia↗

USGS2019

Drinking water health standards comparison and chemical analysis of groundwater for 72 domestic wells in Bradford County, Pennsylvania, 2016

Pennsylvania has the second highest number of residential wells of any state in the Nation with approximately 2.4 million residents that depend on groundwater for their domestic water supply. Despite the widespread reliance on groundwater in rural areas of the state, publicly available data to characterize the quality of private well water are limited. In Bradford County, more than half of the residents use groundwater from private domestic-supply wells as their primary drinking source. The quality of private well water is influenced by the regional and local setting, including the surrounding soil, geology, land use, household plumbing, and well construction. The groundwater used for domestic water supply in Bradford County is obtained primarily from shallow bedrock and from unconsolidated (glacial) deposits that overlie the bedrock. Historical land use has been predominately forested, agricultural, and residential, but more recently unconventional oil/gas development has been distributed throughout the landscape. Pennsylvania is one of only two states in the Nation without statewide water-well construction standards. To better assess the quality of groundwater used for drinking water supply in Bradford County, data for 72 domestic wells were collected and analyzed for a wide range of constituents that could be evaluated in relation to drinking water health standards, geology, land use, and other environmental factors. Groundwater samples were collected from May through August 2016 and analyzed for physical and chemical properties, including major ions, nutrients, trace elements, volatile organic compounds, ethylene and propylene glycol, alcohols, gross-alpha/beta-particle activity, uranium, radon-222, and dissolved gases. A subset of samples was analyzed for radium isotopes (radium-226 and -228) and for the isotopic composition of methane. This study was conducted by the U.S. Geological Survey in cooperation with the Northern Tier Regional Planning and Development Commission and is part of a regional effort to characterize groundwater in rural areas of Pennsylvania. Results of the 2016 study show that groundwater quality generally met most drinking-water standards. However, a percentage of samples failed to meet maximum contaminant levels (MCLs) for total coliform bacteria (49.3 percent), Escherichia coli (8.5 percent), barium (2.8 percent), and arsenic (2.8 percent); and secondary maximum contaminant levels (SMCL) for sodium (48.6 percent), manganese (30.6 percent), gross alpha and beta activity (16.7 percent), iron (11.1 percent), pH (8.3 percent), total dissolved solids (5.6 percent), chloride (1.4 percent), and aluminum (1.4 percent). Radon-222 activities exceeded the proposed drinking-water standard of 300 picocuries per liter (pCi/L) in 70.4 percent of the samples. There were no exceedances of drinking water health standards for any volatile organic compounds, and the only detections were for three trihalomethanes in one sample. The pH of the groundwater had a large influence on chemical characteristics and ranged from 6.18 to 9.31. Generally, the higher pH samples had higher potential for elevated concentrations of several constituents, including total dissolved solids, sodium, lithium, chloride, fluoride, boron, arsenic, and methane. For the Bradford County well-water samples, calcium/bicarbonate type waters were most abundant, with others classified as sodium/bicarbonate or mixed water types including calcium-sodium/bicarbonate, calcium-sodium/bicarbonate-chloride, sodium/bicarbonate-chloride, sodium/bicarbonate-sulfate, or sodium/chloride types. Six principal components (pH, redox, hardness, chloride-bromide, strontium-barium, and molybdenum-arsenic) explained nearly 78.3 percent of the variance in the groundwater dataset. Groundwater from 12.5 percent of the wells had concentrations of methane greater than the Pennsylvania action level of 7 milligrams per liter (mg/L); detectable methane concentrations ranged from 0.01 to 77 mg/L. In addition, low levels of ethane (as much as 0.13 mg/L) were present in seven samples with the highest methane concentrations. The isotopic composition of methane in five of these groundwater samples was consistent with the isotopic compositions reported for mud-gas logging samples from these geologic units and a thermogenic source. Isotopic composition from a sixth sample suggested the methane in that sample may be of microbial origin. Well-water samples with the higher methane concentrations also had higher pH values and elevated concentrations of sodium, lithium, boron, fluoride, arsenic, and bromide. Relatively elevated concentrations of some other constituents, such as barium and chloride, commonly were present in, but not limited to, those well-water samples with elevated methane. Four of the six groundwater samples with the highest methane concentrations had chloride/bromide ratios that indicate mixing with a small amount of brine (0.02 percent or less) similar in composition to those reported for gas and oil well brines in Pennsylvania. In several other eastern Pennsylvania counties where gas drilling is absent, groundwater with comparable chloride/bromide ratios and chloride concentrations have been reported, implying a potential natural source of brine. Most of Bradford County well-water samples have chloride concentrations less than 20 mg/L, and those with higher chloride concentrations have chloride/bromide ratios that indicate anthropogenic sources (such as road-deicing salt and septic effluent) or brine. Brines that are naturally present may originate from deeper parts of the aquifer system, whereas anthropogenic sources are more likely to affect shallow groundwater because they occur on or near the land surface. The available data for this study indicate that no one physical factor, such as the topographic setting, well depth, or altitude at the bottom of the well, was particularly useful for predicting those well locations with an elevated dissolved concentration of methane. The 2016 assessment of groundwater quality in Bradford County shows groundwater is generally of good quality, but methane and some constituents that occur in high concentration in naturally occurring brine and also in produced waters may be present at low to moderate concentrations in groundwater in various parts of the aquifer.

Pennsylvania↗

USGS2014

Quality of groundwater in the Denver Basin aquifer system, Colorado, 2003-5

Groundwater resources from alluvial and bedrock aquifers of the Denver Basin are critical for municipal, domestic, and agricultural uses in Colorado along the eastern front of the Rocky Mountains. Rapid and widespread urban development, primarily along the western boundary of the Denver Basin, has approximately doubled the population since about 1970, and much of the population depends on groundwater for water supply. As part of the National Water-Quality Assessment Program, the U.S. Geological Survey conducted groundwater-quality studies during 2003–5 in the Denver Basin aquifer system to characterize water quality of shallow groundwater at the water table and of the bedrock aquifers, which are important drinking-water resources. For the Denver Basin, water-quality constituents of concern for human health or because they might otherwise limit use of water include total dissolved solids, fluoride, sulfate, nitrate, iron, manganese, selenium, radon, uranium, arsenic, pesticides, and volatile organic compounds. For the water-table studies, two monitoring-well networks were installed and sampled beneath agricultural (31 wells) and urban (29 wells) land uses at or just below the water table in either alluvial material or near-surface bedrock. For the bedrock-aquifer studies, domestic- and municipal-supply wells completed in the bedrock aquifers were sampled. The bedrock aquifers, stratigraphically from youngest (shallowest) to oldest (deepest), are the Dawson, Denver, Arapahoe, and Laramie-Fox Hills aquifers. The extensive dataset collected from wells completed in the bedrock aquifers (79 samples) provides the opportunity to evaluate factors and processes affecting water quality and to establish a baseline that can be used to characterize future changes in groundwater quality. Groundwater samples were analyzed for inorganic, organic, isotopic, and age-dating constituents and tracers. This report discusses spatial and statistical distributions of chemical constituents and evaluates natural and human-related processes that affect water quality. Findings are synthesized to assess the vulnerability of the Denver Basin aquifer system to groundwater contamination. The chemistry of groundwater samples collected from the water-table wells was generally different from that of samples collected from the bedrock-aquifer wells. Samples from the water-table wells tended to have higher concentrations of total dissolved solids and most major ions. Concentrations of several constituents with potential human-health concerns, including nitrate, selenium, uranium, and arsenic, decreased with depth and were highest in samples from the water-table wells. Exceedances of drinking-water standards and water-quality benchmarks were more frequently associated with shallow groundwater samples; concentrations of total dissolved solids and sulfate exceeded water-quality benchmarks for about half or more of samples from the water-table wells. The sediments and rocks of the Denver Basin are natural sources of the trace elements selenium, uranium, and arsenic, which affect their concentrations in groundwater. Detections of organic contaminants, which are typically indicative of human sources of contamination to groundwater, were more frequent in samples from the water-table wells. Pesticide compounds and volatile organic compounds were detected in 33 and 62 percent, respectively, of water-table well samples. Detected organic contaminant concentrations were much less than the associated drinking-water standards. Samples collected from the bedrock aquifers had lower concentrations of total dissolved solids than did samples collected from the water-table wells, although within the bedrock-aquifer samples, concentrations increased from the Dawson to Denver to Arapahoe to Laramie-Fox Hills aquifers. Concentrations of total dissolved solids and many constituents varied spatially and with depth in the bedrock aquifers, likely as a result of ion-exchange and oxidation-reduction reactions, which are important processes affecting water quality. Major-ion chemistry generally evolved from a calcium-bicarbonate to calcium-sulfate composition, with some sodium-bicarbonate and sodium-sulfate facies in the deeper bedrock aquifers, likely resulting from longer residence times and more extensive water-rock interaction. Oxidation-reduction conditions generally evolved from oxic at the water table to anoxic with increasing depth in the bedrock aquifers. Most samples from the bedrock aquifers were anoxic. Exceedances of drinking-water standards and water-quality benchmarks for the bedrock aquifers occurred in 1 percent or less of samples for nitrate, selenium, or arsenic; there were no exceedances for uranium. Exceedances for total dissolved solids, sulfate, manganese, and iron were generally between about 10 and 20 percent for the bedrock-aquifer samples. Radon concentrations, which were only measured in samples collected from two of the bedrock aquifers, exceeded the lower proposed drinking-water standard for more than 90 percent of samples but exceeded the higher alternative standard for less than 5 percent of samples. Pesticide compounds and volatile organic compounds were detected in 3 and 22 percent, respectively, of bedrock-aquifer samples, all at concentrations that were that were much less than drinking-water standards. Water-quality data were synthesized to evaluate factors that affect spatial and depth variability in water quality and to assess aquifer vulnerability to contaminants from geologic materials and those of human origin. The quality of shallow groundwater in the alluvial aquifer and shallow bedrock aquifer system has been adversely affected by development of agricultural and urban areas. Land use has altered the pattern and composition of recharge. Increased recharge from irrigation water has mobilized dissolved constituents and increased concentrations in the shallow groundwater. Concentrations of most constituents associated with poor or degraded water quality in shallow groundwater decreased with depth; many of these constituents are not geochemically conservative and are affected by geochemical reactions such as oxidation-reduction reactions. Groundwater age tracers provide additional insight into aquifer vulnerability and help determine if young groundwater of potentially poor quality has migrated to deeper parts of the bedrock aquifers used for drinking-water supply. Age-tracer results were used to group samples into categories of young, mixed, and old groundwater. Groundwater ages transitioned from mostly young in the water-table wells to mostly mixed in the shallowest bedrock aquifer, the Dawson aquifer, to mostly old in the deeper bedrock aquifers. Although the bedrock aquifers are mostly old groundwater of good water quality, several lines of evidence indicate that young, contaminant-bearing recharge has reached shallow to moderate depths in some areas of the bedrock aquifers. The Dawson aquifer is the most vulnerable of the bedrock aquifers to contamination, but results indicate that the older (deeper) bedrock aquifers are also vulnerable to groundwater contamination and that mixing with young recharge has occurred in some areas. Heavy pumping has caused water-level declines in the bedrock aquifers in some parts of the Denver Basin, which has the potential to enhance the transport of contaminants from overlying units. Results of this study are consistent with the existing conceptual understanding of aquifer processes and groundwater issues in the Denver Basin and add new insight into the vulnerability of the bedrock aquifers to groundwater contamination.

Colorado↗

USGS2014

A reconnaissance spatial and temporal assessment of methane and inorganic constituents in groundwater in bedrock aquifers, Pike County, Pennsylvania, 2012-13

Pike County in northeastern Pennsylvania is underlain by the Devonian-age Marcellus Shale and other shales, formations that have potential for natural gas development. During 2012–13, the U.S. Geological Survey in cooperation with the Pike County Conservation District conducted a reconnaissance study to assess baseline shallow groundwater quality in bedrock aquifers prior to possible shale-gas development in the county. For the spatial component of the assessment, 20 wells were sampled in summer 2012 to provide data on the occurrence of methane and other aspects of existing groundwater quality throughout the county, including concentrations of inorganic constituents commonly present at low levels in shallow, fresh groundwater but elevated in brines. For the temporal component of the assessment, 4 of the 20 wells sampled in summer 2012 were sampled monthly from July 2012 through June 2013 to provide data on seasonal variability in groundwater quality. All water samples were analyzed for major ions, nutrients, selected inorganic trace constituents (including metals and other elements), stable isotopes of water, radon-222, gross alpha- and gross beta-particle activity, dissolved gases (methane, ethane, and ethene), and, if possible, isotopic composition of methane. Additional analyses for boron and strontium isotopes, age-dating of water, and radium-226 were done on water samples collected from six wells in June 2013. Results of the summer 2012 sampling show that water from 16 (80 percent) of 20 wells had detectable concentrations of methane, but concentrations were less than 0.1 milligram per liter (mg/L) in most well-water samples; only two well-water samples had concentrations greater than 1 mg/L. The groundwater with elevated methane also had a chemical composition that differed in some respects (pH, selected major ions, and inorganic trace constituents) from groundwater with low methane concentrations. The two well-water samples with the highest methane concentrations (about 3.7 and 5.8 mg/L) also had the highest pH values (8.7 and 8.3, respectively) and the highest concentrations of sodium, lithium, boron, fluoride, and bromide. Elevated concentrations of some other constituents, such as barium, strontium, and chloride, were not limited to well-water samples with elevated methane, although the two samples with elevated methane also had among the highest concentrations of these constituents. One sample with elevated methane concentrations also had elevated arsenic concentrations, with the arsenic concentration of 30 micrograms per liter (μg/L) exceeding the drinking-water standard of 10 µg/L for arsenic. No other sample from the 20 wells sampled in summer 2012 had concentrations of constituents that exceeded any established primary drinking-water standards. However, radon-222 activities ranging up to 4,500 picocuries per liter (pCi/L) exceeded the proposed drinking-water standard of 300 pCi/L in 85 percent of the 20 well-water samples. The isotopic composition methane in the two high-methane samples (δC CH4 values of -64.55 and -64.41 per mil and δD CH4 values of -216.9 and -201.8 per mil, respectively) indicates a predominantly microbial source for the methane formed by a carbon dioxide reduction process. The stable isotopic composition of water (δD H20 and δ 18 O H20 ) in samples from all 20 wells falls on the local meteoric line, indicating water in the wells was of relatively recent meteoric origin (modern precipitation), including samples with elevated methane concentrations. Analytical results for 4 of the 20 wells sampled monthly for 1 year ending June 2013 in order to assess temporal variability in groundwater quality show that concentrations of major ions generally varied by less than 20 percent, with most differences less than 4 mg/L. Concentrations of methane varied by less than 1 μg/L (0.001 mg/L) in samples from three wells with low methane and by as much as 1 mg/L (1,000 μg/L) in samples from one well with relatively high methane. The isotopic composition of methane in the one well with relatively high methane varied slightly in the monthly samples, ranging from about -64.5 to -64.8 per mil for δ 13 C CH4 and from about -217 to -228 per mil for δD CH4 . The δ 13 C values for dissolved inorganic carbon (DIC) in water from this well were consistent with microbial methane formation by carbon dioxide reduction (drift-type methane) and varied little in the temporal samples, ranging from -10.5 to -10.1 per mil. Additional analyses of samples collected in late June 2013 from six wells with a range of methane and trace constituent concentrations provided baseline data on strontium and boron isotopic compositions ( 87 Sr/ 86 Sr ratios and δ 11 B, respectively) that potentially may be used to differentiate among sources of these constituents. The strontium and boron isotopic composition determined in the six shallow Pike County groundwater samples had 87 Sr/ 86 Sr ratios of 0.71426 to 0.71531 and δ 11 B values of 11.7 to 27.0 per mil, which differ from those reported for brines in Devonian-age formations in Pennsylvania. The June 2013 samples were also analyzed for radium-226 and age-dating dissolved gases. Activities of radium-226 ranged from 0.041 to 0.29 pCi/L in water samples from the six wells and were less than the drinking-water standard of 5 pCi/L for combined radium-226 and radium-228. Age-dating of groundwater using a method based on the presence of anthropogenic gases (chlorofluorocarbons and sulfur hexafluoride) released into the atmosphere yielded estimated recharge dates for water from these six wells that ranged from the 1940s to early 2000s. The oldest water was in samples from wells that had the highest methane concentrations and the youngest water was in samples from a continuously pumped 300-foot deep production well.

Pennsylvania↗

USGS2024

Water-quality characteristics of the Red River of the North and tributaries in the Fargo-Moorhead metropolitan area, North Dakota, 2019–22

The Flood Risk Management Project was initiated in 2008 in the Fargo-Moorhead metropolitan area to reduce flood risk, flood damages, and flood protection costs in the Fargo-Moorhead metropolitan area. In cooperation with the U.S. Army Corps of Engineers, the U.S. Geological Survey initiated a water-quality monitoring study to describe the water-quality characteristics of the Red River of the North and its tributaries in the Fargo-Moorhead metropolitan area during the preconstruction period of the Flood Risk Management Project from October 1, 2019, to October 1, 2022. The monitoring study included the collection of discrete and continuous water-quality data and streamflow monitoring at selected sites that integrated and enhanced existing monitoring programs within the study area. Discrete samples collected at 10 sites in the Fargo-Moorhead metropolitan area were analyzed for major ions, trace elements, nutrients, suspended sediment, pesticides, and fecal indicator bacteria. In general, major ion concentrations were higher at sites on the tributaries (Wild Rice, Sheyenne, and Maple Rivers) compared to sites on the Red River of the North. In general, bicarbonate, calcium, magnesium, and sulfate represented most of the dissolved ions measured in samples collected at the 10 sites. Calcium, chloride, fluoride, potassium, silica, and sodium were also measured in samples, but they represented a smaller portion of the total dissolved ions. Sulfate was the most dominant dissolved ion that had the highest concentrations among the major ions measured in samples. A total of 18 trace elements were analyzed in discrete samples. Several of the trace elements had concentrations below the laboratory reporting level in all of the samples, including antimony, beryllium, cadmium, chromium, silver, and thallium. Sites on the Wild Rice River generally had the highest concentrations of arsenic, barium, boron, manganese, and nickel compared to the other sites. Nutrients analyzed in discrete samples included filtered and unfiltered concentrations of ammonia, nitrate plus nitrite, phosphorus, and organic carbon. The median filtered ammonia concentration at most sites was less than the laboratory reporting level of 0.03 milligram per liter as nitrogen except for the Sheyenne River at Harwood, North Dakota (U.S. Geological Survey [USGS] station 05060400), and Red River of the North near Georgetown, Minnesota (USGS station 05062130). The lowest median unfiltered nitrate plus nitrite concentration was measured at sites on the Red River of the North upstream from the Fargo-Moorhead metropolitan area and the highest median was at sites on the Red River of the North downstream from the Fargo-Moorhead metropolitan area compared to all other sites. The increase in nitrate plus nitrite concentrations could reflect the effect of the wastewater-treatment plant discharge that enters the Red River of the North upstream from the site located downstream from the Fargo-Moorhead metropolitan area and from urban runoff. Phosphorus (unfiltered) concentrations were generally higher at sites on the Maple and Sheyenne Rivers compared to the other sites and were higher at sites on the Red River of the North downstream from the Fargo-Moorhead metropolitan area compared to sites upstream on the Red River of the North. Suspended-sediment concentrations were generally highest at sites in the Sheyenne River and lowest in the upstream Red River of the North sites. Suspended-sediment concentration was highly variable in samples collected at the 10 sites, mostly influenced by the occurrence of snowmelt and rainfall-runoff events. The Sheyenne River near Kindred, N. Dak. (USGS station 05059000) had the largest range in sediment concentrations in samples collected at the 10 sites. For all sites other than the Sheyenne River near Kindred, N. Dak., 95 percent or more of the suspended sediment had particle diameter sizes less than 0.0625 millimeter in 50 percent of the samples (median). Of the 102 pesticides and pesticide degradates analyzed, 45 constituents had no detectable concentrations in any of the 17 samples collected at five sites. The remaining 57 pesticides had at least one detection in the samples collected at the five sites. The sites on the Wild Rice River (near Abercrombie, N. Dak., USGS station 05053000, and near St. Benedict, N. Dak., USGS station 05053500) and Sheyenne River near Kindred, N. Dak., had fewer pesticide detections compared to the Maple River below Mapleton, N.Dak. (USGS station 05060100) and the Red River of the North at Fargo, N. Dak (USGS station 05054000) and near Georgetown, Minn. Patterns in annual loads generally followed the same pattern as streamflow at the 10 sites for water years 2020–22. A water year is the 12-month period from October 1 to September 30 and is designated by the calendar year in which it ends. The greatest loads for all constituents were delivered at the two downstream sites on the Red River of the North; sites that also had the highest annual streamflows among the sites and the greatest loads were delivered in water year 2020 when the highest streamflows occurred at the sites. Likewise, the least loads for most constituents were at the Maple River and were least in 2021 compared to the other years because of low-streamflow conditions. Water-quality measurements continuously recorded at the Red River of the North at Hickson, N. Dak. (USGS station 05051522); Red River of the North at Fargo, N. Dak.; and Red River of the North near Georgetown, Minn. included water temperature, specific conductance, dissolved oxygen, pH, and turbidity. Specific conductance values were similar for the Red River of the North near Hickson, N. Dak., and Red River of the North at Fargo, N. Dak., when compared to the Red River of the North near Georgetown, Minn. that had higher values than the other two sites. Dissolved oxygen concentrations and pH were similar among the three sites on the Red River. The patterns in turbidity were mostly related to streamflow conditions and were similar among the three sites on the Red River of the North.

Minnesota, North Dakota↗

USGS2000

Water-quality assessment of part of the Upper Mississippi River Basin, Minnesota and Wisconsin - Ground-water quality in three different land-use areas, 1996-98

The surficial sand and gravel aquifer is susceptible to effects from land-use in the Upper Mississippi River Basin study unit of the National Water-Quality Assessment (NAWQA) Program. The purpose of this report is to describe the ground-water quality and the assessment of how different land-uses affect the shallow ground-water quality in the surficial sand and gravel aquifer. Ground-water quality was compared in three different land-use areas; an urban residential/commercial area on the edge of the Anoka Sand Plain in a portion of the Twin Cities metropolitan area (urban study), an intensive agricultural area in the Anoka Sand Plain (agricultural study), and a forested area in the Bemidji-Bagley Sand Plain (forested study). Ground water was sampled and analyzed for about 200 constituents, including physical parameters, major ions, selected trace elements, nutrients, dissolved organic carbon, selected pesticides, selected volatile organic compounds (VOCs), and tritium. The urban study wells were sampled during June and July 1996. The agricultural study wells were sampled during May and September 1998. The forested study wells were sampled during June 1998. The depth to water below the land surface generally was less than 20 ft in all three land-use studies. The median pH value in the urban study was 7.2, with medians in the agricultural and forested studies at 7.4 and 7.5, respectively. The median specific conductance was significantly greater in the urban study than in the agricultural and forested studies (914, 553, and 487 µS/cm respectively). The median dissolved oxygen concentration in the urban study (0.9 mg/L) was significantly less than the median in the agricultural or forested studies (5.3 and 2.3 mg/L respectively). Alkalinities in the agricultural study, with a median of 178 mg/L as CaCO 3 , were significantly less than medians in the urban or forested studies (261 and 246 mg/L as CaCO 3 , respectively). The water composition in the surficial aquifer in all three land-use studies is dominated by calcium, magnesium, and bicarbonate. Sulfate and chloride concentrations in water samples were significantly greater in the urban study than in the agricultural or forested studies, and concentrations in the forested study were least. Most of the water samples in all three land-use studies were very hard (greater than 180 mg/L as CaCO 3 ). Nitrate-nitrogen concentrations were greatest in the agricultural study, in which 38 percent of water samples exceeded the U.S. Environmental Protection Agency’s maximum contaminant level (MCL) for nitrate-nitrogen. Nitrate-nitrogen was greater than the MCL in 3 percent of urban study samples. None of the forested study samples exceeded the MCL for nitrate-nitrogen. Concentrations of phosphorus generally were less than 0.05 mg/ L, with no significant differences between the land-uses. A total of 19 pesticides were detected in water samples from one or more land-use study wells, with 11 pesticides detected in the urban study, 14 detected in the agricultural study, and 4 detected in the forested study. Atrazine, deethylatrazine, and simazine were the only pesticides detected in all three land-use studies. A significantly greater percentage of pesticide detections were present in water samples from the agricultural study than from the urban or forested studies (86.2, 56.7, and 46.7 percent, respectively). Prometon was the most frequently detected pesticide in the urban study. Atrazine and deethylatrazine were the most frequently detected pesticides in the agricultural and forested studies. Twenty-one VOCs were detected in water samples from one or more land-use study wells, with 19 detected in the urban study, 7 detected in the agricultural study, and none detected in the forested study. Chloromethane, trichloromethane, methylbenzene, trichlorofluoromethane, and benzene were all detected in both the urban and agricultural studies. A significantly greater percentage of VOC detections were present in water samples from the urban study than from the agricultural study (90 and 50 percent, respectively). Carbon disulfide was the most frequently detected VOC in the urban study. The compound 1,2,3,4-tetramethyl benzene was the most frequently detected VOC in the agricultural study. Tritium concentrations indicate that the water in the surficial sand and gravel aquifer has been recharged since 1953. Median tritium concentrations ranged from 11.6 to 12.8 tritium units. No significant difference in tritium concentrations was present between the three land-use studies. Comparisons of previous land-use studies in Minnesota with the three NAWQA land-use studies generally indicated the same patterns. Ground-water quality in surficial sand and gravel aquifers is affected by land-use practices. Ground water in urban studies has greater specific conductances, alkalinities, chloride, sodium, sulfate, and dissolved solid concentrations than agricultural or forested/undeveloped studies. Nitrate-nitrogen was detected in greater concentrations in agricultural studies than in urban studies, with concentrations in the forested/undeveloped studies less than in the agricultural or the urban studies. Agricultural studies have the greatest detection rates, numbers, and total concentrations of pesticides. Pesticide detection rates and total pesticide concentrations in the urban studies were less than in the agricultural studies, with the most frequently detected pesticides (prometon and dicamba) different than those in the agricultural studies (atrazine and deethylatrazine). A greater number of VOCs were detected in urban studies and at greater concentrations than in agricultural studies. Few pesticides or VOCs were detected in forested/undeveloped studies.

Minnesota↗

USGS2013

Overview of groundwater quality in the Piceance Basin, western Colorado, 1946--2009

Groundwater-quality data from public and private sources for the period 1946 to 2009 were compiled and put into a common data repository for the Piceance Basin. The data repository is available on the web at http://rmgsc.cr.usgs.gov/cwqdr/Piceance/index.shtml. A subset of groundwater-quality data from the repository was compiled, reviewed, and checked for quality assurance for this report. The resulting dataset consists of the most recently collected sample from 1,545 wells, 1,007 (65 percent) of which were domestic wells. From those samples, the following constituents were selected for presentation in this report: dissolved oxygen, dissolved solids, pH, major ions (chloride, sulfate, fluoride), trace elements (arsenic, barium, iron, manganese, selenium), nitrate, benzene, toluene, ethylbenzene, xylene, methane, and the stable isotopic compositions of water and methane. Some portion of recharge to most of the wells for which data were available was derived from precipitation (most likely snowmelt), as indicated by δ2H [H2O] and δ18O[H2O] values that plot along the Global Meteoric Water Line and near the values for snow samples collected in the study area. Ninety-three percent of the samples were oxic, on the basis of concentrations of dissolved oxygen that were greater than or equal to 0.5 milligrams per liter. Concentration data were compared with primary and secondary drinking-water standards established by the U.S. Environmental Protection Agency. Constituents that exceeded the primary standards were arsenic (13 percent), selenium (9.2 percent), fluoride (8.4 percent), barium (4.1 percent), nitrate (1.6 percent), and benzene (0.6 percent). Concentrations of toluene, xylenes, and ethylbenzene did not exceed standards in any samples. Constituents that exceeded the secondary standard were dissolved solids (72 percent), sulfate (37 percent), manganese (21 percent), iron (16 percent), and chloride (10 percent). Drinking-water standards have not been established for methane, which was detected in 24 percent of samples. Methane concentrations were greater than or equal to 1 milligram per liter in 8.5 percent of samples. Methane isotopic data for samples collected primarily from domestic wells in Garfield County indicate that methane in samples with relative high methane concentrations were derived from both biogenic and thermogenic sources. Many of the constituents that exceeded standards, such as arsenic, fluoride, iron, and manganese, were derived from rock and sediment in aquifers. Elevated nitrate concentrations were most likely derived from human sources such as fertilizer and human or animal waste. Information about the geologic unit or aquifer in which a well was completed generally was not provided by data sources. However, limited data indicate that Quaternary deposits in Garfield and Mesa Counties, the Wasatch Formation in Garfield County, and the Green River Formation in Rio Blanco County had some of the highest median concentrations of selected constituents. Variations in concentration with depth could not be evaluated because of the general lack of well-depth and water-level data. Concentrations of several important constituents, such as arsenic, manganese, methane, and nitrate, were related to concentrations of dissolved oxygen. Concentrations of arsenic, manganese, and methane were significantly higher in groundwater with low dissolved-oxygen concentrations than in groundwater with high dissolved-oxygen concentrations. In contrast, concentrations of nitrate were significantly higher in groundwater with high dissolved-oxygen concentrations than in groundwater with low dissolved-oxygen concentrations. These results indicate that measurements of dissolved oxygen may be a useful indicator of groundwater vulnerability to some human-derived contaminants and enrichment from some natural constituents. Assessing such a large and diverse dataset as the one available through the repository poses unique challenges for reporting on groundwater quality in the study area. The repository contains data from several studies that differed widely in purpose and scope. In addition to this variability in available data, gaps exist spatially, temporally, and analytically in the repository. For example, groundwater-quality data in the repository were not evenly distributed throughout the study area. Several key water-quality constituents or indicators, such as dissolved oxygen, were underrepresented in the repository. Ancillary information, such as well depth, depth to water, and the geologic unit or aquifer in which a well was completed, was missing for more than 50 percent of samples. Future monitoring could avoid several limitations of the repository by making relatively minor changes to sample- collection and data-reporting protocols. Field measurements for dissolved oxygen could be added to sampling protocols, for example. Information on well construction and the geologic unit or aquifer in which a well was completed should be part of the water-quality dataset. Such changes would increase the comparability of data from different monitoring programs and also add value to each program individually and to that of the regional dataset as a whole. Other changes to monitoring programs could require greater resources, such as sampling for a basic set of constituents that is relevant to major water-quality issues in the regional study area. Creation of such a dataset for the regional study area would help to provide the kinds of information needed to characterize background conditions and the spatial and temporal variability in constituent concentrations associated with those conditions. Without such information, it is difficult to identify departures from background that might be associated with human activities.

Colorado↗

USGS2021

Hydrogeologic framework, geochemistry, groundwater-flow system, and aquifer hydraulic properties used in the development of a conceptual model of the Ogallala, Edwards-Trinity (High Plains), and Dockum aquifers in and near Gaines, Terry, and Yoakum Counties, Texas

In 2014, the U.S. Geological Survey, in cooperation with Llano Estacado Underground Water Conservation District, Sandy Land Underground Water Conservation District, and South Plains Underground Water Conservation District (hereinafter referred to collectively as the “UWCDs”), began a multiphase study in and near Gaines, Terry, and Yoakum Counties, Texas, to develop a regional conceptual model of the hydrogeologic framework, geochemistry, groundwater-flow system, and hydraulic properties, primarily for the High Plains and Edwards-Trinity aquifer system and to a lesser degree for the Dockum aquifer. The High Plains aquifer system (hereinafter referred to as the “Ogallala aquifer”), contained within the Ogallala Formation in Texas, is the shallowest aquifer in the study area and is the primary source of water for agriculture and municipal supply in the areas managed by the UWCDs. Groundwater withdrawals from deeper aquifers (primarily the Edwards-Trinity [High Plains] aquifer system that is hereinafter referred to as the “Edwards-Trinity [High Plains] aquifer”) augmented by lesser amounts from the Dockum aquifer provide additional water sources in the study area. The Edwards-Trinity (High Plains) aquifer is contained within the Trinity and Fredericksburg Groups. The Dockum aquifer, a relatively minor source of water in the study area, is contained in the Dockum Group, which was evaluated as a single unit. The potential for continual declines of the groundwater in the Ogallala aquifer in the study area and the potential changes in water quality resulting from dewatering and increased vertical groundwater movement between adjacent water-bearing units have raised concerns about the amount and quality of available groundwater. The developed conceptual model helped in the understanding of the quantity and quality of the groundwater within the Ogallala, the Edwards-Trinity (High Plains), and to a lesser extent, the Dockum aquifers within the study area. The hydrogeologic framework was used to assess the vertical and lateral extents of hydrogeologic units, bed orientations, unit thicknesses, and location and orientation of paleochannels. In general, the Trinity and Fredericksburg Groups and Ogallala Formation exhibit a slight regional dip (dip angle of about 0.14 degrees) to the southeast with dip directions becoming more to the south with each successively overlying unit (105, 110, and 125 degrees for the bases of the Trinity and Fredericksburg Groups and Ogallala Formation, respectively). In general, the Trinity and Fredericksburg Groups thin to the south and are not present in the southern part of Gaines County, whereas the Ogallala Formation becomes thinner from west to east. The combined thickness of the Trinity and Fredericksburg Groups and Ogallala Formation is generally greatest in the north-central part of the study area and thinnest in the southeastern part of the study area. Paleochannel orientation varied over geologic time as formations were deposited and eroded. Water-quality samples were collected from 51 wells throughout the study area to better understand general water quality and to provide insight into groundwater-flow paths and recharge areas. Groundwater samples were spatially grouped on the basis of similarities found in the physicochemical properties, major ions, trace elements, nutrients, organic compounds, and selected stable isotopes and age tracers. Three groundwater groups were identified in the study area. The first groundwater group (Group 1), represented mostly by groundwater from the Ogallala and Edwards-Trinity (High Plains) aquifers in the northern half of the study area, is considered to be recent recharge, affected by land-use activities, as explained by the younger age, higher concentrations of nitrate plus nitrite, and more frequent detections of organic compounds. Groundwater wells in the second groundwater group (Group 2) are typically in the southwestern and northwestern parts of the study area, and the groundwater in this group is considered to be groundwater recharged during the Pleistocene period, as explained by the relatively old age of the groundwater, high strontium stable isotope ratios, and hydrogen and oxygen stable isotope ratios. The last groundwater group (Group 3) is likely a mixture of groundwater from the first or second groups (or both) with a third, highly mineralized groundwater as explained by having the highest dissolved-solids concentrations in the study area and having some similarities to geochemical characteristics of samples from the first and second groups. A groundwater-flow system analysis was done to understand the flow of groundwater throughout the aquifer system. Groundwater-level altitudes for the Ogallala, Edwards-Trinity (High Plains), and Dockum aquifers are generally higher in the northwestern part of the study area and lower in the southeastern part of the study area. Groundwater generally flows in a northwest to southeast direction across the study area in each of the aquifers. The groundwater-flow paths closely resemble the mapped paleochannels, indicating that within the study area, the groundwater flows preferentially along the paleochannels, especially within the Ogallala aquifer where dewatering of the aquifer results in a greater effect of the base structure on the flow of groundwater. The Ogallala aquifer is unsaturated in localized areas in the study area; unsaturated areas are generally near the southern extent of the Edwards-Trinity (High Plains) aquifer, with the largest unsaturated area west of Seminole, Tex. The saturated thickness of the Ogallala aquifer is thickest (more than 125 feet) southeast of Seminole and west of Brownfield, Tex., near the border between Terry and Yoakum Counties. The saturated thickness of the combined Ogallala and Edwards-Trinity (High Plains) aquifers ranges from less than 10 feet along the far southern edge of the study area to more than 350 feet north and east of Brownfield, Tex., and along the border between Terry and Yoakum Counties. The aquifer hydraulic properties, including hydraulic conductivity and specific yield, were estimated to better understand the ability of groundwater to move through the aquifer system and quantify the volume of available water in storage. The hydraulic-conductivity values varied greatly within the study area (ranging from about 0.03 to about 350 feet per day), and often large variations were found in the same area. Terry County contained the highest and lowest hydraulic conductivity values for the Ogallala aquifer, whereas Yoakum County contained the highest and lowest hydraulic conductivity values for the Edwards-Trinity (High Plains) aquifer. The highest hydraulic-conductivity values for the Dockum aquifer were in Gaines County, whereas the lowest hydraulic-conductivity values were in Terry County. The estimated specific yield values within the study area range from 0.01 to 0.36. Higher specific yield values generally occurred in the western part of the study area except in the Ogallala aquifer where higher specific yield values were in the east. The Ogallala aquifer had the lowest specific yield range and the least specific yield variability among the three aquifers, whereas the Dockum aquifer had the highest specific yield range and the greatest specific yield variability. Using the estimated saturated thickness and estimated specific yield grids, the water volumes of the Ogallala and Edwards-Trinity (High Plains) aquifers and the combined Ogallala and Edwards-Trinity (High Plains) aquifers were estimated. The available water in the Edwards-Trinity (High Plains) aquifer (16.6 million acre-feet) is almost double the available water in the Ogallala aquifer (8.8 million acre-feet). Although the Edwards-Trinity (High Plains) aquifer contains more available groundwater, pumping is more difficult because of the relatively low hydraulic conductivity and specific yield values compared to the Ogallala aquifer. Overall, the available water within the combined Ogallala and Edwards-Trinity (High Plains) aquifers is about 6.6, 10.2, and 8.6 million acre-feet for Gaines, Terry, and Yoakum Counties, respectively.

Texas↗

USGS2020

Groundwater quality in relation to drinking water health standards and hydrogeologic and geochemical characteristics for 47 domestic wells in Potter County, Pennsylvania, 2017

As part of a regional effort to characterize groundwater in rural areas of Pennsylvania, water samples from 47 domestic wells in Potter County were collected from May through September 2017. The sampled wells had depths ranging from 33 to 600 feet in sandstone, shale, or siltstone aquifers. Groundwater samples were analyzed for physicochemical properties that could be evaluated in relation to drinking-water health standards, geology, land use, and other environmental factors. Laboratory analyses included concentrations of major ions, nutrients, bacteria, trace elements, volatile organic compounds (VOCs), ethylene and propylene glycol, alcohols, gross-alpha/beta-particle activity, uranium, radon-222, and dissolved gases. A subset of samples was analyzed for radium isotopes (radium-226 and -228) and for the isotopic composition of methane. Results of this 2017 study show that groundwater quality generally met most drinking-water standards that apply to public water supplies. However, a percentage of samples exceeded maximum contaminant levels (MCLs) for total coliform bacteria (69.6 percent), Escherichia coli (30.4 percent), arsenic, and barium; and secondary maximum contaminant levels (SMCLs) for field pH, manganese, sodium, iron, total dissolved solids, aluminum, and chloride. All of the analyzed VOCs were below limits of detection and associated drinking water criteria. Radon-222 activities exceeded the proposed drinking-water standard of 300 picocuries per liter in 80.9 percent of the samples. The field pH of the groundwater ranged from 4.6 to 9.0. Generally, the lower pH samples had greater potential for elevated concentrations of dissolved metals, including beryllium, copper, lead, nickel, and zinc, whereas the higher pH samples had greater potential for elevated concentrations of total dissolved solids, sodium, fluoride, boron, and uranium. Near-neutral samples (pH 6.5 to 7.5) had greater hardness and alkalinity concentrations than other samples with pH values outside this range. Calcium/bicarbonate waters were the predominant hydrochemical type for the sampled aquifers, with mixed water types for many samples, including variable contributions from calcium, magnesium, and sodium combined with bicarbonate, sulfate, chloride, and nitrate. Water from 45 wells had concentrations of methane greater than the 0.0002 milligrams per liter (mg/L) detection limit. One sample had the maximum value of 11 mg/L, which exceeds the Pennsylvania action level of 7 mg/L. Additionally, three other samples had concentrations of methane greater than 4 mg/L. Outgassing of such levels of methane from the water to air within a confined space can result in a potential hazard. The elevated concentrations of methane generally were associated with suboxic groundwater (dissolved oxygen less than 0.5 mg/L) that had near-neutral to alkaline pH with relatively elevated concentrations of iron, manganese, ammonia, lithium, fluoride, and boron. Other constituents, including barium, sodium, chloride, and bromide, commonly were elevated, but not limited to, those well-water samples with elevated methane. Low levels of ethane (as much as 1.2 mg/L) were present in eight samples with the highest methane concentrations. Five samples were analyzed for methane isotopes. The isotopic and hydrocarbon compositions in these five samples suggest the methane may be of microbial origin or a mixture of thermogenic and microbial gas, but differed from the compositions reported for mud-gas logging samples collected during drilling of gas wells. The concentrations of sodium (median 8.2 mg/L), chloride (median 7.64 mg/L), and bromide (median 0.02 mg/L) for the 47 groundwater samples collected for this study ranged widely and were positively correlated with one another and with specific conductance and associated measures of ionic strength. Sixty percent of the Potter County well-water samples had chloride concentrations less than 10 mg/L. Samples with higher chloride concentrations had variable bromide concentrations and corresponding chloride/bromide ratios that are consistent with sources such as road-deicing salt and septic effluent (low bromide) or brine (high bromide). Brines are naturally present in deeper parts of the regional groundwater system and, in some cases, may be mobilized by gas drilling. It is also possible that valley wells were drilled close to or into the brine-freshwater interface, so brine signatures do not necessarily indicate contamination due to drilling. The chloride, bromide, and other constituents in road-deicing salt or brine solutions tend to be diluted by mixing with fresh groundwater in shallow aquifers used for water supply. Although 1 of 8 groundwater samples with the highest methane concentrations (greater than 0.2 mg/L) had concentrations of chloride and bromide with corresponding chloride/bromide ratios that indicated mixing with road-deicing salt, the other 7 of 8 samples with elevated methane had concentrations of chloride and bromide with corresponding chloride/bromide ratios that indicated mixing with a small amount of brine (0.02 percent or less) similar in composition to those reported for gas and oil well brines in Pennsylvania. In several eastern Pennsylvania counties where gas drilling is absent, groundwater with comparable chloride/bromide ratios and chloride concentrations have been reported. Approximately 50 percent of Potter County well-water samples, including two samples with the fourth (72.9 mg/L) and fifth (47.0 mg/L) highest chloride concentrations, have chloride/bromide ratios that indicate predominantly anthropogenic sources of chloride, such as road-deicing salt or septic effluent.

Pennsylvania↗

USGS2017

Hydrology and water quality in 13 watersheds in Gwinnett County, Georgia, 2001–15

The U.S. Geological Survey (USGS), in cooperation with Gwinnett County Department of Water Resources, established a Long-Term Trend Monitoring (LTTM) program in 1996. The LTTM program is a comprehensive, long-term, water-quantity and water-quality monitoring program designed to document and analyze the hydrologic and water-quality conditions of selected watersheds in Gwinnett County, Georgia. Water-quality monitoring initially began in six watersheds and currently [2016] includes 13 watersheds. As part of the LTTM program, streamflow, precipitation, water temperature, specific conductance, and turbidity were measured every 15 minutes for water years 2001–15 at 12 of the 13 watershed monitoring stations and for water years 2010–15 at the other watershed. In addition, discrete water-quality samples were collected seasonally from May through October (summer) and November through April (winter), including one base-flow and three stormflow event composite samples, during the study period. Samples were analyzed for nutrients (nitrogen and phosphorus), total organic carbon, trace elements (total lead and total zinc), total dissolved solids, and total suspended sediment (total suspended solids and suspended-sediment concentrations). The sampling scheme was designed to identify variations in water quality both hydrologically and seasonally. The 13 watersheds were characterized for basin slope, population density, land use for 2012, and the percentage of impervious area from 2000 to 2014. Several droughts occurred during the study period—water years 2002, 2007–08, and 2011–12. Watersheds with the highest percentage of impervious areas had the highest runoff ratios, which is the portion of precipitation that occurs as runoff. Watershed base-flow indexes, the ratio of base-flow runoff to total runoff, were inversely correlated with watershed impervious area. Flood-frequency estimates were computed for 13 streamgages in the study area that have 10 or more years of annual peak flow data through water year 2015, using the expected moments algorithm to fit a Pearson Type III distribution to logarithms of annual peak flows. Kendall’s tau nonparametric test was used to determine the statistical significance of trends in the annual peak flows, with none of the 13 streamgages exhibiting significant trends. A comparison of base-flow and stormflow water-quality samples indicates that turbidity and concentrations of total ammonia plus organic nitrogen, total nitrogen, total phosphorus, total organic carbon, total lead, total zinc, total suspended solids, and suspended-sediment concentrations increased with increasing discharge at all watersheds. Specific conductance decreased during stormflow at all watersheds, and total dissolved solids concentrations decreased during stormflow at a few of the watersheds. Total suspended solids and suspended-sediment concentrations typically were two orders of magnitude higher in stormflow samples, turbidities were about 1.5 orders of magnitude higher, total phosphorus and total zinc were about one order of magnitude higher, and total ammonia plus organic nitrogen, total nitrogen, total organic carbon, and total lead were about twofold higher than in base-flow samples. Seasonality and long-term trends were identified for the period water years 2001–15 for 10 constituents—total nitrogen, total nitrate plus nitrite, total phosphorus, dissolved phosphorus, total organic carbon, total suspended solids, suspended-sediment concentration, total lead, total zinc, and total dissolved solids. Seasonal patterns were present in most watersheds for all constituents except total dissolved solids, and the watersheds had fairly similar patterns of higher concentrations in the summer and lower concentrations in the winter. A linear long-term trend analysis of residual concentrations from the flow-only load estimation model (without time-trend terms) identified significant trends in 67 of the 130 constituent-watershed combinations. Seventy percent of the significant trends were negative. Total organic carbon and total dissolved solids had predominantly positive trends. Total phosphorus, total suspended solids, suspended-sediment concentration, total lead, and total zinc had only negative trends. The other three constituents exhibited fewer trends, both positive and negative. Streamwater loads were estimated annually for the 13-year period water years 2003–15 for the same 10 constituents in the trend analysis. Loads were estimated using a regression-model-based approach developed by the USGS for the Gwinnett County LTTM program that accommodates the use of storm-event composited samples. Concentrations were modeled as a function of discharge, base flow, time, season, and turbidity to improve model predictions and reduce errors in load estimates. Total suspended solids annual loads have been identified in Gwinnett County’s Watershed Protection Plan for target performance criterion. Although the amount of annual runoff was the primary factor in variations in annual loads, climatic conditions (classified as dry, average, or wet) affected annual loads beyond what was attributed to climatic-related variations in annual runoff. Significant negative trends in loads were estimated for the combined area of the watersheds for all constituents except dissolved phosphorus, total organic carbon, and total dissolved solids. The trend analysis indicated that total suspended solids and suspended-sediment concentration loads in the study area were decreasing by 57,000 and 87,000 pounds per day per year, respectively. Variations in constituent yields between watersheds appeared to be related to various watershed characteristics. Suspended sediment (as either total suspended solids or suspended-sediment concentrations), along with constituents transported predominately in solid phase (total phosphorus, total organic carbon, total lead, and total zinc), and total dissolved solids typically had higher yields from watersheds that had high percentages of impervious areas or high basin slope. High total nitrogen yields were also associated with watersheds with high percentages of impervious areas. Low total nitrogen, total suspended solids, total lead, and total zinc yields appeared to be associated with watersheds that had a low percentage of high-density development.

Georgia↗