SEARCH · USGS Science

Results for “Stratigraphy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources

USGS1998

Seismic or hydrodynamic control of rapid late-Holocene sea-level rises in southern coastal Oregon, USA?

Intertidal stratigraphy has been instrumental in demonstrating the hazard posed by great earthquakes at the Cascadia subduction zone, but inferring an earthquake history from interbedded sequences of peat and mud is complicated by many factors that influence sedimentation and relative sea-level change on both tectonic and nontectonic coasts. Rapid-to-sudden rises in relative sea level marked by sharp contacts between intertidal peat and overlying mud or sand may reflect coseismic coastal subsidence and tsunami deposition or, alternatively, nonseismic hydrodynamic changes in estuaries. Reconnaissance coring at 16 sites in the marshes fringing a narrow, protected tidal inlet of Coos Bay, supplemented by diatom and 14 C analyses at four sites, reveals a stratigraphic record too fragmentary and ambiguous to distinguish seismic from hydrodynamic causes for more than three of the 10 rises in relative sea-level identified. Only three sharp contacts have the wide extent and evidence of substantial (>0.5 m) submergence that distinguish them from similar contacts produced by nonseismic processes. Correlation with stratigraphic sequences at other estuaries shows that the fringing marshes suddenly subsided and were partially buried by tsunami sand during a great plate-boundary earthquake about 300 years ago. Similar contacts were produced by earthquakes about 1500–1800 years ago, and perhaps about 2400–2700 years ago. Other earthquakes with substantially less subsidence may also have occurred, but evidence is too ambiguous to reconstruct a more complete history.

Holocene↗

USGS1981

Stratigraphic and economic significance of Mississippian sequence at North Georgetown Canyon, Idaho

The Mississippian sequence exposed at North Georgetown Canyon, Idaho is newly recognised as a facies belt, which adds to knowledge of Mississippian stratigraphy and petroleum geology in the Overthrust belt of Idaho, Wyoming, and Utah. In the newly recognized facies belt in the Aspen Range, the Madison Group is represented by the Lodgepole Limestone and Mission Canyon Limestone. The overlying beds of middle Osagean to middle Chesterian age are a unique combination of deep-basin shallowing upward to peritidal lithofacies (the Aspen Range Formation). An organic-rich phosphatic member at the base of this is a possible petroleum source rock. Westward thinning of the Mission Canyon Limestone suggests a pinch-out that may provide stratigraphic traps for petroleum.-from Authors

Idaho↗

USGS2003

Petroleum system and production characteristics of the Muddy (J) Sandstone (Lower Cretaceous) Wattenberg continuous gas field, Denver basin, Colorado

Wattenberg field is a continuous-type gas accumulation. Estimated ultimate recovery from current wells is 1.27 tcf of gas from the Lower Cretaceous Muddy (J) Sandstone. Mean gas resources that have the potential to be added to these reserves in the next 30 yr are 1.09 tcf; this will be primarily through infill drilling to recover a greater percentage of gas in place and to drain areas that are isolated because of geologic compartmentalization. Greatest gas production from the Muddy (J) Sandstone in Wattenberg field occurs (1) from within the most permeable and thickest intervals of Fort Collins Member delta-front and nearshore-marine sandstones, (2) to a lesser extent from the Horsetooth Member valley-fill channel sandstones, (3) in association with a large thermal anomaly that is delineated by measured temperatures in wells and by vitrinite reflectance contours of 0.9% and greater, (4) in proximity to the bounding Mowry, Graneros, and Skull Creek shales that are the hydrocarbon source rocks and reservoir seals, and (5) between the Lafayette and Longmont right-lateral wrench fault zones (WFZs) with secondary faults that act as conduits in areas of the field. The axis of greatest gas production is north 25 to 35 degrees northeast, which parallels the basin axis. Recurrent movement along five right-lateral WFZs that crosscut Wattenberg field shifted the Denver basin axis to the northeast and influenced depositional and erosional patterns of the reservoir and seal intervals. Levels of thermal maturity within the Wattenberg field are anomalously high compared to other areas of the Denver basin. The Wattenberg field thermal anomaly may be due to upward movement of fluids along faults associated with probable igneous intrusions. Areas of anomalous high heat flow within the field correlate with an increased and variable gas-oil ratio. Debra Higley has 5 years experience in uranium exploration and 20 years as a petroleum geologist with the U.S. Geological Survey. Her research interests include and integrate reservoir characterization, thermal maturation studies, and petroleum resource assessment in basins in North and South America. She received a B.S. degree in geology from Mesa State College (Colorado) and an M.S. degree in geochemistry and Ph.D. in geology from the Colorado School of Mines.Dave Cox is vice president of Reservoir Engineering for Questa Engineering in Golden, Colorado. He has 25 years experience in the oil and gas industry, primarily in reservoir engineering and property evaluations, and has analyzed reservoirs in 31 states of the United States and 19 other countries. He is an expert in coalbed methane, tight gas reservoirs, and enhanced oil recovery. He has B.S. and M.S. degrees in petroleum engineering from the Colorado School of Mines. Robert Weimer has taught courses in stratigraphy, regional and field geology, and energy resource exploration and development for 43 years. He earned B.A. and M.A. degrees from the University of Wyoming and his Ph.D. from Stanford University. He has been a visiting professor at universities in Calgary, Canada; Adelaide, Australia; and Bandung, Indonesia. He is currently professor emeritus, Colorado School of Mines. Weimer has been honored for teaching excellence, blending basic and applied research, national and international continuing education, and service to scientific societies and to state and national boards.

Colorado↗

USGS2007

Geologic framework of the Mississippian Barnett Shale, Barnett-Paleozoic total petroleum system, Bend arch-Fort Worth Basin, Texas

This article describes the primary geologic characteristics and criteria of the Barnett Shale and Barnett-Paleozoic total petroleum system (TPS) of the Fort Worth Basin used to define two geographic areas of the Barnett Shale for petroleum resource assessment. From these two areas, referred to as "assessment units," the U.S. Geological Survey estimated a mean volume of about 26 tcf of undiscovered, technically recoverable hydrocarbon gas in the Barnett Shale. The Mississippian Barnett Shale is the primary source rock for oil and gas produced from Paleozoic reservoir rocks in the Bend arch-Fort Worth Basin area and is also one of the most significant gas-producing formations in Texas. Subsurface mapping from well logs and commercial databases and petroleum geochemistry demonstrate that the Barnett Shale is organic rich and thermally mature for hydrocarbon generation over most of the Bend arch-Fort Worth Basin area. In the northeastern and structurally deepest part of the Fort Worth Basin adjacent to the Muenster arch, the formation is more than 1000 ft (305 m) thick and interbedded with thick limestone units; westward, it thins rapidly over the Mississippian Chappel shelf to only a few tens of feet. The Barnett-Paleozoic TPS is identified where thermally mature Barnett Shale has generated large volumes of hydrocarbons and is (1) contained within the Barnett Shale unconventional continuous accumulation and (2) expelled and distributed among numerous conventional clastic- and carbonate-rock reservoirs of Paleozoic age. Vitrinite reflectance (Ro) measurements show little correlation with present-day burial depth. Contours of equal Ro values measured from Barnett Shale and typing of produced hydrocarbons indicate significant uplift and erosion. Furthermore, the thermal history of the formation was enhanced by hydrothermal events along the Ouachita thrust front and Mineral Wells-Newark East fault system. Stratigraphy and thermal maturity define two gas-producing assessment units for the Barnett Shale: (1) a greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit, encompassing an area of optimal gas production where dense impermeable limestones enclose thick (???300 ft; ???91 m) Barnett Shale that is within the gas-generation window (Ro ??? 1.1%); and (2) an extended continuous Barnett Shale gas assessment unit covering an area where the Barnett Shale is within the gas-generation window, but is less than 300 ft (91 m) thick, and either one or both of the overlying and underlying limestone barriers are absent. Copyright ?? 2007. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗

USGS1992

Lithofacies analysis of colluvial sediments - an aid in interpreting the recent history of Quaternary normal faults in the Basin and Range Province, western United States

Inferring the frequency and magnitude of past earthquakes from the stratigraphy in exposures of normal-faulted sediments is difficult because colluvial lithofacies assemblages adjacent to faults are complex. Similarities in facies assemblages adjacent to young fault scarps in arid to semiarid areas, such as the Basin and Range province, allow lithofacies to be grouped into two genetic architectural elements: debris and wash elements. Upper and lower facies associations can commonly be recognized within each element. A lithofacies code scheme, similar to those used in the analysis of fluvial and glacial lithofacies sequences, provides a concise way of illustrating lithofacies relations in fault exposures. The source lithology of colluvial lithofacies is shown in the code, and soil-horizon symbols can be included. The architecture of lithofacies assemblages near fault scarps in semiarid areas is explained by a model of colluvial sedimentation in response to a single surface faulting event. Analysis of lithofacies assemblages exposed in three trenches across normal faults in the eastern Basin and Range shows how the model can be used to interpret fault histories. Similar facies analysis methods may be useful in interpreting colluvial sequences formed by non-tectonic processes.

Journal of Sedimentary Petrology↗

USGS2007

Geologic characteristics of the central stretch of the Ticona Channel, north-central Illinois

The Ticona Channel is located in north-central Illinois and occurs in Grundy, LaSalle, and Putnam counties. It is a buried bedrock valley that served as the principal paleodrainage system in north-central Illinois during the Illinoian and pre-Illinoian. This study focused on the part of the Ticona Channel within the Leonore 7.5??? Quadrangle. The geometry and stratigraphy of sediments that fill the Ticona Channel were investigated using high-resolution, shallow seismic reflection profiling, traditional field geologic mapping techniques, borehole data, and water-well-log data. The valley is about 2 km (1 mi) wide and approximately 60 m (200 ft) deep. The U-shape channel is straight, trends east-west, and has only one mappable tributary. The valley is carved into the Pennsylvanian Carbondale Formation in the eastern part of the study area; it has incised into the Ordovician Prairie du Chien Group in the west. At its base, the Ticona Channel is filled with the Pearl Formation, which is coarse-grained sand and gravel that was deposited during the Illinoian glaciation. The Pearl Formation is overlain by Illinoian till of the Glasford Formation and is capped by Wedron Group sediments from the Wisconsinan stage. Copyright ?? 2007. The American Association of Petroleum Geologists/Division of Environmental Geosciences. All rights reserved.

Environmental Geosciences↗

USGS2007

The importance of subsurface geology for water source and vegetation communities in Cherokee Marsh, Wisconsin

Restoration of disturbed wetland systems is an important component of wetland mitigation, yet uncertainty remains about how hydrologic processes affect biologic processes and wetlands patterns. To design more effective restoration strategies and re-establish native plant communities in disturbed wetlands, it is imperative to understand undisturbed systems. A site within Cherokee Marsh located in Madison, Wisconsin, USA, contains a relatively undisturbed area of wetland consisting of plant communities common within the prairie landscape including a fen, sedge meadow, and shallow marsh. These distinct communities are found within an area of minimal topographic relief, yet transitions from one community to the next occur over short distances. This study sought to characterize the geologic, hydrologic, and chemical gradients associated with these shifts in vegetation to gain insight into the factors controlling the spatial differences in dominant plant species, which could be critical for restoration success. Vegetation analyses revealed a transition of dominant sedge species, which appeared to correspond to changes in hydrology from a ground-water dominated to a surface-water dominated system (as determined by water isotopes). Along the same vegetation transect, subsurface coring results show a heterogeneous composition of peat and till with lateral and vertical variations in stratigraphy, which relates to variability in ground-water discharge as evidenced by hydroperiods and stable isotope composition. Applications of this type of approach throughout the glaciated terrains of the midwestern and northeastern United States and Canada can improve future wetland restoration and management.

Wisconsin↗

USGS2008

The Overmyer mastodon (Mammut americanum) from Fulton County, Indiana

In June 1978 the partial skeleton of an American mastodon, Mammut americanum , was salvaged from a drainage ditch in Fulton County, north-central Indiana. The remains were recovered mostly from ca. 170–260 cm below the current land surface in marl overlain by peat and peaty marl. The stratigraphy of the site indicates that the remains were deposited in a small, open-water pond that subsequently filled. The skeleton, which is 41–48% complete, is that of a mature female, ca. 30–34 y old at death based on dental eruption and wear. Postcranial bone measurements indicate that this individual was relatively large for a female. Radiocarbon dating of wood from under the pelvis of the mastodon provided a maximum date of 12,575 ± 260 14 C y BP [15,550–13,850 cal y BP] for the animal, which is up to 2575 14 C y before the species is believed to have become extinct. Pollen samples from the site corroborate the interpretation that the regional climate was cooler and more humid than at present and supported a mixed spruce-deciduous parkland assemblage. The relatively small size of the molars of this and other mastodons from Indiana supports the hypothesis that late-glacial mastodons—just prior to their extinction—were smaller in size relative to earlier, full-glacial conspecifics. The relationship between molar size and body size is not clear, however, and there may be geographical factors as well as a temporal influence to size variation in these animals.

Indiana↗

USGS2002

Structure and earthquake offsets on the San Andreas fault at the Wrightwood, California paleoseismic site

Thirty-eight trenches and natural exposures across the San Andreas fault zone, four km northwest of Wrightwood, California, reveal the structure and stratigraphy of this paleoseismic site. A 25-m-thick stratigraphic section of late Holocene peat, debris flows, and fluvial sediments have accumulated syntectonically and are deformed in a complicated flower, or flake, structure within the fault zone. Whereas slip is everywhere parallel to the trend of the San Andreas fault, layering within the fan-shaped section guides the surface faulting, and transtensive portions of the structure are connected to transpressive portions by bedding-parallel detachment faults. The structure has grown through time, widely distributing the evidence for individual earthquakes. The broad zone of deformation and rapid sedimentation permit the characterization of an unusually large number of prehistoric earthquakes. The presence of at least four geomorphically similar sites within 10 km along the fault zone suggests that this kind of site is common and other sites should be exploited.

California↗

USGS2002

Subsurface geometry and evolution of the Seattle fault zone and the Seattle Basin, Washington

The Seattle fault, a large, seismically active, east-west-striking fault zone under Seattle, is the best-studied fault within the tectonically active Puget Lowland in western Washington, yet its subsurface geometry and evolution are not well constrained. We combine several analysis and modeling approaches to study the fault geometry and evolution, including depth-converted, deep-seismic-reflection images, P-wave-velocity field, gravity data, elastic modeling of shoreline uplift from a late Holocene earthquake, and kinematic fault restoration. We propose that the Seattle thrust or reverse fault is accompanied by a shallow, antithetic reverse fault that emerges south of the main fault. The wedge enclosed by the two faults is subject to an enhanced uplift, as indicated by the boxcar shape of the shoreline uplift from the last major earthquake on the fault zone. The Seattle Basin is interpreted as a flexural basin at the footwall of the Seattle fault zone. Basin stratigraphy and the regional tectonic history lead us to suggest that the Seattle fault zone initiated as a reverse fault during the middle Miocene, concurrently with changes in the regional stress field, to absorb some of the north-south shortening of the Cascadia forearc. Kingston Arch, 30 km north of the Seattle fault zone, is interpreted as a more recent disruption arising within the basin, probably due to the development of a blind reverse fault.

Washington↗

USGS2004

Great earthquakes and tsunamis of the past 2000 years at the Salmon River estuary, central Oregon coast, USA

Four buried tidal marsh soils at a protected inlet near the mouth of the Salmon River yield definitive to equivocal evidence for coseismic subsidence and burial by tsunami-deposited sand during great earthquakes at the Cascadia subduction zone. An extensive, landward-tapering sheet of sand overlies a peaty tidal-marsh soil over much of the lower estuary. Limited pollen and macrofossil data suggest that the soil suddenly subsided 0.3-1.0 m shortly before burial. Regional correlation of similar soils at tens of estuaries to the north and south and precise 14C ages from one Salmon River site imply that the youngest soil subsided during the great earthquake of 26 January A.D. 1700. Evidence for sudden subsidence of three older soils during great earthquakes is more equivocal because older-soil stratigraphy can be explained by local hydrographic changes in the estuary. Regional 14C correlation of two of the three older soils with soils at sites that better meet criteria for a great-earthquake origin is consistent with the older soils recording subsidence and tsunamis during at least two great earthquakes. Pollen evidence of sudden coseismic subsidence from the older soils is inconclusive, probably because the amount of subsidence was small (<0.5 m). The shallow depths of the older soils yield rates of relative sea-level rise substantially less than rates previously calculated for Oregon estuaries.

Bulletin of the Seismological Society of America↗

USGS2005

Holocene and latest Pleistocene oblique dextral faulting on the southern Inyo Mountains fault, Owens Lake basin, California

The Inyo Mountains fault (IMF) is a more or less continuous range-front fault system, with discontinuous late Quaternary activity, at the western base of the Inyo Mountains in Owens Valley, California. The southern section of the IMF trends ???N20??-40?? W for at least 12 km at the base of and within the range front near Keeler in Owens Lake basin. The southern IMF cuts across a relict early Pliocene alluvial fan complex, which has formed shutter ridges and northeast-facing scarps, and which has dextrally offset, well-developed drainages indicating long-term activity. Numerous fault scarps along the mapped trace are northeast-facing, mountain-side down, and developed in both bedrock and younger alluvium, indicating latest Quaternary activity. Latest Quaternary multiple- and single-event scarps that cut alluvium range in height from 0.5 to 3.0 m. The penultimate event on the southern IMF is bracketed between 13,310 and 10,590 cal years B.P., based on radiocarbon dates from faulted alluvium and fissure-fill stratigraphy exposed in a natural wash cut. Evidence of the most recent event is found at many sites along the mapped fault, and, in particular, is seen in an ???0.5-m northeast-facing scarp and several right-stepping en echelon ???0.5-m-deep depressions that pond fine sediment on a younger than 13,310 cal years B.P. alluvial fan. A channel that crosses transverse to this scarp is dextrally offset 2.3 ?? 0.8 m, providing a poorly constrained oblique slip rate of 0.1-0. 3 m/ k.y. The identified tectonic geomorphology and sense of displacement demonstrate that the southern IMF accommodates predominately dextral slip and should be integrated into kinematic fault models of strain distribution in Owens Valley.

Bulletin of the Seismological Society of America↗

USGS2009

A 3000-year record of ground-rupturing earthquakes along the central North Anatolian fault near Lake Ladik, Turkey

The North Anatolian fault (NAF) is a ???1500 km long, arcuate, dextral strike-slip fault zone in northern Turkey that extends from the Karliova triple junction to the Aegean Sea. East of Bolu, the fault zone exhibits evidence of a sequence of large (M w >7) earthquakes that occurred during the twentieth century that displayed a migrating earthquake sequence from east to west. Prolonged human occupation in this region provides an extensive, but not exhaustive, historical record of large earthquakes prior to the twentieth century that covers much of the last 2000 yr. In this study, we extend our knowledge of rupture events in the region by evaluating the stratigraphy and chronology of sediments exposed in a paleoseismic trench across a splay of the NAF at Destek, ???6:5 km east of Lake Ladik (40.868?? N, 36.121?? E). The trenched fault strand forms an uphill-facing scarp and associated sediment trap below a small catchment area. The trench exposed a narrow fault zone that has juxtaposed a sequence of weakly defined paleosols interbedded with colluvium against highly fractured bedrock. We mapped magnetic susceptibility variations on the trench walls and found evidence for multiple visually unrecognized colluvial wedges. This technique was also used to constrain a predominantly dip-slip style of displacement on this fault splay. Sediments exposed in the trench were dated using both charcoal and terrestrial gastropod shells to constrain the timing of the earthquake events. While the gastropod shells consistently yielded 14 C ages that were too old (by ???900 yr), we obtained highly reliable 14 C ages from the charcoal by dating multiple components of the sample material. Our radiocarbon chronology constrains the timing of seven large earthquakes over the past 3000 yr prior to the 1943 Tosya earthquake, including event ages of (2?? error): A.D. 1437-1788, A.D. 1034-1321, A.D. 549-719, A.D. 17-585 (1-3 events), 35 B.C.-A.D. 28, 700-392 B.C., 912-596 B.C. Our results indicate an average interevent time of 385 166?? yr (1??).

Bulletin of the Seismological Society of America↗

USGS2015

Basement and regional structure along strike of the Queen Charlotte Fault in the context of modern and historical earthquake ruptures

The Queen Charlotte fault (QCF) is a dextral transform system located offshore of southeastern Alaska and western Canada, accommodating &sim;4.4  cm/yr of relative motion between the Pacific and North American plates. Oblique convergence along the fault increases southward, and how this convergence is accommodated is still debated. Using seismic reflection data, we interpret offshore basement structure, faulting, and stratigraphy to provide a geological context for two recent earthquakes, an M w 7.5 strike‐slip event near Craig, Alaska, and an M w 7.8 thrust event near Haida Gwaii, Canada. We map downwarped Pacific oceanic crust near 54° N, between the two rupture zones. Observed downwarping decreases north and south of 54° N, parallel to the strike of the QCF. Bending of the Pacific plate here may have initiated with increased convergence rates due to a plate motion change at &sim;6  Ma. Tectonic reconstruction implies convergence‐driven Pacific plate flexure, beginning at 6 Ma south of a 10° bend the QCF (which is currently at 53.2° N) and lasting until the plate translated past the bend by &sim;2  Ma. Normal‐faulted approximately late Miocene sediment above the deep flexural depression at 54° N, topped by relatively undeformed Pleistocene and younger sediment, supports this model. Aftershocks of the Haida Gwaii event indicate a normal‐faulting stress regime, suggesting present‐day plate flexure and underthrusting, which is also consistent with reconstruction of past conditions. We thus favor a Pacific plate underthrusting model to initiate flexure and accommodation space for sediment loading. In addition, mapped structures indicate two possible fault segment boundaries along the QCF at 53.2° N and at 56° N.

Alaska↗

USGS2024

Limited evidence of late Quaternary tectonic surface deformation in the eastern Tennessee seismic zone, USA

The ~300-km-long eastern Tennessee seismic zone (ETSZ), USA, is the second-most seismically active region east of the Rocky Mountains. Seismicity generally occurs below the Paleozoic fold-and-thrust belt within the Mesoproterozoic basement, at depths of 5–26 km, and earthquake magnitudes during the instrumental record have been moment magnitude ( M w )≤4.8. Evidence of surface deformation may not exist or be difficult to detect because of the vegetated and soil-mantled landscape, landslides, locally steep topography, anthropogenic landscape modification, or long, irregular recurrence intervals between surface-rupturing earthquakes. Despite the deep seismicity, analog models indicate that accumulation of strike-slip or oblique-slip displacement at depth could be expected to propagate upward through the Paleozoic section, producing a detectable surficial signal of distributed faulting. To identify potential surface deformation, we interrogated the landscape at different spatial scales. We evaluated morphotectonic and channel metrics, such as channel sinuosity and catchment-scale hypsometry. Additionally, we mapped possible fault-related topographic features on 1-m lidar. Finally, we integrated our observations with available bedrock and Quaternary surficial mapping and subsurface geophysical data. At a regional scale, most morphotectonic and channel metrics have a strong lithologic control. Within smaller regions of similar lithology, we observe changes in landscape metrics like channel sinuosity and catchment-scale hypsometry that spatially correlate with new lineaments identified in this study and previously mapped east–west Cenozoic faults. These faults have apparent left-lateral offsets, are optimally oriented to slip in the current stress field, and match kinematics from recent focal mechanisms, but do not clearly preserve evidence of late Pleistocene or Holocene tectonic surface deformation. Most newly mapped lineaments might be explained by either tectonic or non-tectonic origins, such as fluvial or karst processes. We also re-evaluated a previously described paleoseismic site and interpret that the exposure does not record evidence of late Pleistocene faulting but instead is explained by fluvial stratigraphy.

Tennessee↗

USGS2008

Response of Late Cretaceous migrating deltaic facies systems to sea level, tectonics, and sediment supply changes, New Jersey Coastal Plain, U.S.A.

Paleogeographic, isopach, and deltaic lithofacies mapping of thirteen depositional sequences establish a 35 myr high resolution (> 1 Myr) record of Late Cretaceous wave- and tide-influenced deltaic sedimentation. We integrate sequences defined on the basis of lithologic, biostratigraphic, and Sr-isotope stratigraphy from cores with geophysical log data from 28 wells to further develop and extend methods and calibrations of well-log recognition of sequences and facies variations. This study reveals the northeastward migration of depocenters from the Cenomanian (ca. 98 Ma) through the earliest Danian (ca. 64 Ma) and documents five primary phases of paleodeltaic evolution in response to long-term eustatic changes, variations in sediment supply, the location of two long-lived fluvial axes, and thermoflexural basement subsidence: (1) Cenomanian-early Turonian deltaic facies exhibit marine and nonmarine facies and are concentrated in the central coastal plain; (2) high sediment rates, low sea level, and high accommodation rates in the northern coastal plain resulted in thick, marginal to nonmarine mixed-influenced deltaic facies during the Turonign-Coniacian; (3) comparatively low sediment rates and high long-term sea level in the Santonian resulted in a sediment-starved margin with low deltaic influence; (4) well-developed Campanian deltaic sequences expand to the north and exhibit wave reworking and longshore transport of sands, and (5) low sedimentation rates and high long-term sea level during the Maastrichtian resulted in the deposition of a sediment-starved glauconitic shelf. Our study illustrates the widely known variability of mixed-influence deltaic systems, but also documents the relative stability of deltaic facies systems on the 106-107 yr scale, with long periods of cyclically repeating systems tracts controlled by eustasy. Results from the Late Cretaceous further show that although eustasy provides the template for sequences globally, regional tectonics (rates of subsidence and accommodation), changes in sediment supply, proximity to sediment input, and flexural subsidence from depocenter loading determines the regional to local preservation and facies expression of sequences. Copyright ?? 2008, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗

USGS2010

Correlation of aptian-albian carbon isotope excursions in continental strata of the cretaceous Foreland Basin, Eastern Utah, U.S.A.

Nodular carbonates ("calcretes") in continental foreland-basin strata of the Early Cretaceous Cedar Mountain Formation (CMF) in eastern Utah yield ??13C and ??O records of changes in the exogenic carbon cycle related to oceanic anoxic events (OAEs), and terrestrial paleoclimate. Chemostratigraphic profiles of both forebulge and foredeep sections show two prominent positive ??13C excursions, each with a peak value of -3% VPDB, and having background ??13C values of about -6% VPDB. These excursions correlate with the global early Aptian (Ap7) and late Aptian-early Albian (Apl2-All) carbon isotope excursions. Aptian-Albian positive ??13C excursions in the CMF also correspond to 3-4 per mil increases in carbonate ??18O. These phenomena record local aridification events. The chemostratigraphic profile on the thinner forebulge section of the CMF is calibrated, for the first time, by a radiogenic U-Pb date of 119.4 ?? 2.6 Ma on a carbonate bed, and by detrital zircon U-Pb dates on two bounding sandstone units (maximum depositional ages of 146 Ma and 112 Ma). P??trographie observations and diagenetic analyses of micritic to microsparitic carbonates from nodules indicate palustrine origins and demonstrate that they crystallized in shallow early meteoric phreatic environments. Meteoric calcite lines derived from CMF carbonates have ??18O values ranging between -8.1 to -7.5%o VPDB, supporting an estimate of zonal mean groundwater ??18O of -6% VSMOW for an Aptian-Albian paleolatitude of 34?? N. Furthermore, our two chemostratigraphic profiles exhibit a generally proportionate thinning of correlative strata from the foredeep on to the forebulge, suggesting that there were consistently lower rates of accumulation on the forebulge during the Aptian-Albian. Identification of the global Aptian-Albian ??13C excursions in purely continental strata, as demonstrated in this paper, opens a new avenue of research by identifying specific stratigraphie intervals that record the terrestrial paleoclimatic impacts of perturbations of the global carbon cycle. Copyright ?? 2010, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗

USGS2021

Deepwater debrites and linked megaturbidites in confined basins: An example from the Onnuri Basin, East Sea of Korea

We analyzed data from seven piston cores, multi-channel seismic-reflection (MCS) and chirp profiles, and multibeam echosounder (MBES) data to study the distribution, emplacement time, sedimentary facies, and depositional processes of sediment-gravity-flow deposits in the Onnuri Basin, a confined basin in the East Sea. These data reveal that debris flows have traveled ca. 30 km downslope, forming a seismic facies consisting of stacked, wedge-shaped, transparent units separated by high-amplitude continuous reflectors. Analysis of piston cores shows three distinct sedimentary units, throughout the basin. The lowest unit, I, is a debrite containing numerous mud clasts of varying size and color distributed in a mud-rich matrix; it is absent over elevated basinal highs or ridges, such as the Onnuri Ridge, suggesting that local topography controls its distribution. The debrite forms a recognizable acoustically transparent layer on subbottom chirp profiles (av. 7 m thick), covers approximately 500 km 2 , and has an estimated volume of ∼ 3.5 km 3 . The overlying unit, II, contains normally graded beds composed of massive sand, laminated and cross-laminated sand and silt, and a thick cap of structureless mud. This unit is interpreted to be a megaturbidite deposited from turbidity currents that originated from the flow transformation of debris flows on the upper continental slope. The megaturbidite covers the entire basin (at least 650 km 2 ), and has an average thickness of 2.8 m (maximum thickness of 4.35 m), and comprises a volume of 1.8 km 3 . Variations in grain size and sedimentary structures suggest that the megaturbidite was deposited by progressively waning flows that reflected off basin flanks and ridges. The thick (up to 3.65 m) structureless mud cap further indicates deposition in a confined basin. The sharp basal contact, together with the lack of hemipelagic sediments between debrite and overlying megaturbidite, suggest that both were deposited during the same flow event, likely to have originated from a single catastrophic slope failure. Collapsing slide material evolved into a debris flow, from which a turbidite formed by dilution of the debris flow. Radiocarbon dates suggest that the slope failure occurred about 13–11 ka, a time when sea level was ca. 50 m lower than at the present day. Hemipelagic sediments in the topmost unit, III-2, above the megaturbidite indicate that the basin has been stable since ca. 11 ka. We provide robust evidence that submarine slope failures evolve downslope into slides, debris flows, and finally, thick megaturbidites. This contribution highlights the importance of seafloor morphology on the distribution and stratigraphy of submarine flows in confined basins.

Onnuri Basin↗