USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the Air & Waste Management Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 85Linked to original sources
USGS2025

Aftershocks in stress shadows are inconsistent with modeled static Coulomb stress changes

Aftershock triggering is commonly attributed to increases in static Coulomb stress. In some areas, termed "stress shadows", a decrease in Coulomb stress is predicted to suppress earthquake occurrence. However, aftershocks are often observed in the modeled stress shadows. We examine several hypotheses that attempt to reconcile these shadow aftershocks with the static Coulomb stress change model: (1) they appear to be in shadows because of inaccuracy in the stress change calculations, (2) they occur on faults of unusual orientation which actually experienced increased Coulomb stress, (3) they occur on faults with different frictional properties, not modeled well by Coulomb stress, and (4) they are secondary aftershocks triggered by prior aftershocks or afterslip. When tested on the 2016 Mw7.0 Kumamoto, Japan, and 2019 Mw7.1 Ridgecrest, California, aftershock sequences, none of these hypotheses can explain the majority of the shadow aftershocks, and taken together these hypotheses can explain only about half of these aftershocks. This implies that Coulomb stress modeling that lacks small-scale fault zone heterogeneity might be inadequate to fully capture the true static stress changes and/or that other physical triggering models are needed, for example transient processes such as delayed triggering by dynamic stress changes from the passing seismic waves.

California↗
USGS2025

“Leaky weirs” capture alluvial deposition and enhance seasonal mountain-front recharge in dryland streams

“Leaky weirs” are rock structures installed in dryland streams, which are anchored into exposed bedrock, loosely cemented, and designed to allow water to slowly pass through. They are being tested at a ranch in southeastern Arizona, USA, to restore and conserve the historic range and desert wetlands. Data are collected to assess how leaky weirs impact surface water, subsurface water, and groundwater recharge—including stream discharge, timing, and depth of infiltration, and groundwater elevations. Three adjacent watersheds, two with outlets just below leaky weirs and one with leaky weirs farther upstream, were instrumented with water-level loggers, wildlife cameras, and crest stage instruments with temperature sensors in the soil. As most groundwater recharge is assumed to be focused along the mountain fronts in this region, mountain-block recharge is also evaluated to differentiate between the two using isotope analyses. Finally, a single, late-season flood event is scrutinized to consider the leaky weir effect on all monitored components in the water budget. Results indicated groundwater flow is primarily from the mountains to the east via older, regional mountain-block recharge. However, the development of shallow alluvial aquifers is supported by the leaky weirs, that slow flows, capture permeable sediments, and allow infiltration, thus enhancing mountain-front recharge. In turn, these new pockets of water help support the restoration of historic wetlands. Sediment accumulates where leaky weirs are installed, reducing flashy peak flows, and resulting in a series of infiltration ponds along the channel that support vegetation during growing seasons and recharge the shallow aquifer during non-growing seasons.

Arizona↗
USGS2025

Microbial ecology of permafrost soils: Populations, processes, and perspectives

Permafrost microbial research has flourished in the past decades, due in part to improvements in sampling and molecular techniques, but also the increased focus on the permafrost greenhouse gas feedback to climate change and other ecological processes in high latitude and alpine permafrost soils. Permafrost microorganisms are adapted to these extreme environments and remain active at low temperatures and when resources are limited. They are also an important component of global elemental cycles as they regulate organic matter turnover and greenhouse gas production, particularly as permafrost thaws. Here we review the permafrost microbiology literature coupled with an exploration of its historical aspects, with a particular focus on a new understanding advanced by molecular biology techniques. We further identify knowledge gaps and ways forward to improve our understanding of microbial contributions to ecosystem biogeochemistry of permafrost-affected systems.

Permafrost and Periglacial Processes↗
USGS2025

Lunar grid systems, coordinate systems, and map projections for the Artemis missions and lunar surface navigation

Foreward This document contains design specifications of a navigational standard for the Moon, including a Lunar Transverse Mercator system, a Lunar Polar Stereographic system, a Lunar Grid Reference System, and a unique coordinate structure, Artemis Condensed Coordinates, for Artemis mission navigation and lunar surface science. The National Aeronautics and Space Administration (NASA) Artemis campaign seeks to place humans on the Moon for the first time since the Apollo missions. Early Artemis missions are heavily focused on the lunar south pole, which promises to return valuable data on the Moon’s geologic record, amongst other mission objectives. Coordinate systems in use today for the lunar south pole provides crew members on the surface neither an efficient nor intuitive means to communicate their position and orientation. A novel grid coordinate system, the Lunar Grid Reference System, is proposed to address these concerns for use in real-time extravehicular activity operations on the lunar surface. The many stakeholders involved in the Artemis missions will need a common system to communicate position and orientation while astronauts are operating on the lunar surface. To that end, Artemis crew members will need that system to be efficient and intuitive to promote efficient extravehicular activity timelines and reduce confusion. In the context of this document, these characteristics are addressed on the design of lunar coordinate systems: Efficient.—The number of characters required to communicate a location within a desired precision level in both local and global contexts, and how many steps are required for a recipient or sender to interpret a location. Intuitive.—How well the system aligns with human perceptual abilities, and whether the system yields distances that have the same relationship to actual lunar surface distance in all directions from the point where a person is located. Technological systems are currently being investigated to supplement the crew members’ ability to locate and orient themselves and other assets on the lunar surface; however, it is unlikely that those systems will be fully operational for the first few landed missions. Even with future positional aids, crew members will still need an efficient and intuitive means to communicate position and orientation. In addition, if technological systems fail, the crews will require land navigation skills and have maps available, thus providing further motivation for a crew-centric coordinate system. The contents of this U.S. Geological Survey (USGS) document detail a comprehensive framework for standardizing lunar crewed surface navigation within NASA and outlines the protocols, methods, and designs necessary for achieving consistency and interoperability across relevant space mission teams and lunar surface navigators. Key components of this document include designs of map projections, projected coordinate reference systems (Lunar Transverse Mercator and Lunar Polar Stereographic systems), and a grid system (Lunar Grid Reference System and Artemis Condensed Coordinates) for the Moon. The work proposed in this document seeks to accomplish something similar to the National Geospatial-Intelligence Agency (NGA) document SIG 0012 (NGA, 2014a), but for using grid systems for the Moon. This report incorporates initial feedback and input from NASA’s Artemis Geospatial Data Team, NASA’s Flight Operations Directorate, National Geodetic Survey, USGS Astrogeology Science Center, and NGA and is intended to serve as a resource for all involved with the Artemis missions, as well as for engineers designing and operating lunar infrastructure.

Techniques and Methods↗
USGS2026

Cruise summary—Samoa Basin abyssal mapping—Box coring leg, Pago Pago, Territory of American Samoa to Pago Pago, American Samoa, April 11– May 1, 2026

Expedition Summary U.S. Geological Survey scientists led a box coring effort to the Samoa Basin to characterize minerals and the surrounding abyssal sediments and fauna. Thirty-eight box cores were deployed between April 13, 2026, and April 28, 2026. Thirty-six box cores recovered sufficient material to determine nodule density, and 35 recovered sufficient material for subcores to be collected. The purpose of this Data Report is to provide a summary of samples collected, initial results that were obtained shipboard, and briefly mention planned future analyses from this expedition.

Data Report↗
USGS2026

Ten new insights in climate science 2025

Interdisciplinary understanding is vital for delivering sound climate policy advice. However, navigating the ever-growing and increasingly diverse scholarly literature on climate change is challenging for any individual researcher. This annual synthesis highlights and explains recent advances across a variety of fields of climate change research. This year, the 10 insights focus on: (1) the record-warmth of 2023/2024 and the elevated Earth energy imbalance; (2) acceleration of ocean warming and intensifying marine heatwaves; (3) northern land carbon sinks under strain; (4) reinforcing feedback between biodiversity loss and climate change; (5) accelerated depletion of groundwater; (6) global dengue incidence; (7) global income losses and labour productivity declines; (8) strategic scaling of CDR; (9) integrity challenges in carbon credit markets and emerging responses; and (10) effective policy mixes for emissions reductions. The insights have been written to be accessible to researchers from different fields, serving as entry-points to specific topics, as well as providing an overview of the evolving landscape of climate change research. In the final section, the insights are used to develop overarching policy-relevant messages. This paper provides the basis for a science-policy report that was shared with all Party delegations ahead of COP30 in Belém, Brazil.

Global Sustainability↗
USGS2024

Reference 1D seismic velocity models for volcano monitoring and imaging: Methods, models, and applications

Seismic velocity models of the crust are an integral part of earthquake monitoring systems at volcanoes. 1D models that vary only in depth are typically used for real‐time hypocenter determination and serve as critical reference models for detailed 3D imaging studies and geomechanical modeling. Such models are usually computed using seismic tomographic methods that rely on P ‐ and S ‐wave arrival‐time picks from numerous earthquakes recorded at receivers around the volcano. Traditional linearized tomographic methods that jointly invert for source locations, velocity structure, and station corrections depend critically on having reasonable starting values for the unknown parameters, are susceptible to local misfit minima and divergence, and often do not provide adequate uncertainty information. These issues are often exacerbated by sparse seismic networks, inadequate distributions of seismicity, and/or poor data quality common at volcanoes. In contrast, modern probabilistic global search methods avoid these issues only at the cost of increased computation time. In this article, we review both approaches and present example applications and comparisons at several volcanoes in the United States, including Mount Hood (Oregon), Mount St. Helens (Washington), the Island of Hawai’i, and Mount Cleveland (Alaska). We provide guidance on the proper usage of these methods as relevant to challenges specific to volcano monitoring and imaging. Finally, we survey‐published 1D P ‐wave velocity models from around the world and use them to derive a generic stratovolcano velocity model, which serves as a useful reference model for comparison and when local velocity information is sparse.

Seismological Research Letters↗
USGS2026

Quantifying methane emissions from a rich fen with uncrewed aircraft systems in boreal Alaska

Thawing of permafrost in northern latitudes is accelerating, potentially releasing substantial amounts of methane (CH 4 ) as forested permafrost plateaus transition into wetlands. This ecosystem shift alters the carbon exchange between the soil and atmosphere, influencing the permafrost-carbon feedback. Monitoring these changes may require measurement platforms operating across varied spatial and temporal scales. Recent advancements in small uncrewed aircraft systems (sUAS) enable high resolution CH 4 flux quantification in remote, complex terrains; however, comparisons with established methods such as eddy covariance flux towers remain limited. We used a hexacopter sUAS to quantify CH 4 emissions from the Alaska Peatland Experiment, a wetland within the Bonanza Creek Experimental Forest. Using an ensemble of methods to define the background CH 4 concentration, along with near surface emissions from soil chambers, helped constrain our flux estimates. The sUAS method yielded an average flux of 0.0077 ± 0.0019 mol s −1 CH 4 , within a factor of two concurrent tower-derived total source flux estimates (0.0036 ± 0.00042 mol s −1 CH 4 ). To assess spatial drivers of observed fluxes, we conducted a 2D footprint analysis and overlaid the results with high-resolution hyperspectral land cover classification, quantifying vegetative contributions within each footprint. This revealed higher fen representation in sUAS measurements (73.8%) than in tower footprints (58.8%), and lower tussock meadow representation (15.6% and 30.3%, respectively). These differences were consistent with known variation in vegetation-specific CH 4 emissions. Our results highlight that combining footprint modeling with land cover characterization can enhance interpretations of CH 4 fluxes and guide cross-platform comparisons.

JGR Atmospheres↗
USGS2024

Wildfire, extreme precipitation and debris flows, oh my! Channel response to compounding disturbances in a mountain stream in the Upper Colorado Basin, USA

Compounding changes in climate and human activities stand to increase sediment input to rivers in many landscapes, including via discrete perturbations such as post-fire debris flows. Because sediment supply is a dominant control on river morphology, understanding mountain river responses to sediment regime perturbations is critical to predicting and addressing downstream effects to infrastructure, water security and aquatic habitat. A growing body of literature explores the causes, likelihood, size and composition of post-fire debris flows, but the channel response to these disturbances remains poorly studied. This study used repeat field surveys, time-lapse photographs and pre- and post-disturbance remote sensing datasets to document and analyse space- and time-varying channel response to post-fire debris flows along a steep mountain stream in the Upper Colorado River Basin, USA. Specifically, we evaluated channel morphology and bed composition changes, correlations between channel changes and valley and channel attributes, and the relative importance of spring snowmelt versus summer monsoon events. Several cross-sectional channel change types were observed from lidar a month after post-fire debris-flow events, including channelized and braided incision into deposits, incision into the pre-fire channel bed, bank erosion and no change. Channel changes were most correlated with pre-fire channel width, valley width and unit stream power, and these relationships could be tested in other burned locations to evaluate their transferability. Repeat channel surveys before and after snowmelt indicate rapid recovery and channel narrowing following major sediment disturbances, although sediment deposits remained in the channel margins. Together, these results highlight the importance of field and remote sensing-based channel surveys to improve understanding of, and potential to predict, mountain channel response to compounding climate disturbances.

Earth Surface Processes and Landforms↗
USGS2025

Statistical approaches for modeling correlated grade and tonnage distributions and applications for mineral resource assessments

Correlations between grade and tonnage exist in mineral resource data compiled from published reports, but they are not always addressed during quantitative assessment of undiscovered mineral resources. Failure to account for correlated grade and tonnage distributions can result in geologically unrealistic assessment results. Current software tools simulate univariate ore tonnage and multivariate resource grades of undiscovered deposits independently. As a result, analysts are forced to rely on ad-hoc solutions to minimize the correlation issues by: 1) creating subsets of data with restricted criteria; 2) truncating grade and tonnage distributions; and 3) testing model robustness using exploratory data analysis. While these methods represent pragmatic solutions, the statistical solutions presented here provide additional options to address real correlations in grade and tonnage data used for mineral resource assessments. We present a modified version of the MapMark4 package in R that introduces two alternatives for modeling grade and tonnage distributions, consisting of a multivariate solution that accounts for correlations between ore tonnage and metal grades and an empirical solution that utilizes simple random sampling with replacement to reproduce coupled grades and tonnages from the input data. We present simulations for contained ore and metal for three case studies representing tungsten skarn, komatiite-hosted nickel, and sediment-hosted carbonate amagmatic zinc-lead (Mississippi Valley-type) deposits. Employing the methods presented here yields quantitative mineral resource assessment results that more closely reflect the empirical distributions of grades and tonnages observed in nature and expands the applicability of these tools for ongoing critical mineral resource assessments.

Applied Computing and Geosciences↗
USGS2024

Groundwater quality near the Placerita Oil Field, California, 2018

Groundwater-quality data and potential fluid-migration pathways near the Placerita Oil Field in Los Angeles County, California, were examined by the U.S. Geological Survey to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with groundwater resources. Six of the 13 new groundwater samples collected for this study contained petroleum hydrocarbons, thermogenic gas, inorganic chemical signatures, and (or) isotopic values consistent with potential mixing with fluids from hydrocarbon-bearing formations. For historical groundwater samples, benzene was the most detected petroleum hydrocarbon. The historical groundwater samples with a benzene concentration greater than 0.5 micrograms per liter were from environmental monitoring wells at industrial or commercial facilities unrelated to oil and gas development that, in many cases, have identified soil or groundwater contamination and were not typically analyzed for other constituents that could provide additional lines of evidence for potential mixing with oil-field fluids. Methane was not detected in any of the 12 historical samples with a reported measurement. Reviewing historical data revealed factors that could potentially adversely affect groundwater quality in the study area. These factors include modified hydraulic gradients caused by large volumes of water extracted from the main production area and reinjected downgradient into nonproducing zones, well-barrier failures in wells constructed in the northern part of the oil field before the 1970s, well-barrier failures in produced-water disposal wells downgradient from the main production area, and naturally occurring hydrocarbons at shallow intervals. The groundwater samples most geochemically similar to samples from hydrocarbon-bearing formations were in areas where hydrocarbons are naturally occurring at shallow intervals and where oil development is at shallow depths. Additional data for hydraulic heads, water quality, and formation temperatures at multiple depths in areas with large injection volumes and well-integrity issues are needed to evaluate whether those factors have contributed to mixing between fluids from oil-producing or injection formations and groundwater resources.

California↗
USGS2026

Neutron scattering reveals fractionation of natural gas mixtures in unconventional petroleum reservoir pores: Perspectives on energy resource recovery and storage

In unconventional petroleum reservoirs hydrocarbon fluids are hosted by both mineral and organic matter pores. These pores can have diameters that range from microns to less than a single nanometer and, for unconventional reservoirs, there is evidence that small pores ( <20 nm diameter) may constitute a large proportion of the available space. Understanding subsurface volumes and how fluids behave in them can be helpful for predicting hydrocarbon production and storage in the subsurface. One area with knowledge gaps regarding hydrocarbon behavior in small pores is the possibility for mixtures to fractionate (i.e., unmix) based on pore size or pore type. Mixture fractionation as a function of pore size could impact recovery of hydrocarbons, drive compositional shifts during production, and limit fluid storage within candidate reservoirs. To investigate natural gas fractionation in small geologic pores, we applied total neutron scattering to probe methane-ethane mixtures at reservoir pressures (up to ≈30 MPa) and temperature (60°C) within a sample from the Upper Cretaceous Niobrara Formation. Neutron scattering data reveal only minor fractionation occurs between methane and ethane in 20-nm diameter sample mesopores. Increased fractionation is observed for sample micropores, with up to 72% (±1% at 1-sigma) methane found in 2 nm diameter pores following injection of a 50%-50% methane-ethane mixture. These data provide rarely available direct experimental observations of hydrocarbon mixture behavior under nanoconfinement in a sample from an important unconventional petroleum reservoir. Our results are discussed in the context of evaluating hydrocarbon resources in unconventional reservoir meso- and micropores, reconciling observed gas composition changes during production, and more broadly, understanding subsurface pore volumes within an energy storage framework.

Fuel↗
USGS2026

The digital archivist: Automating legacy macroseismic data processing using large language models

Macroseismic data are a key resource to investigate shaking and damage from preinstrumental and early instrumental eras. However, data are often stored as inconsistently formatted reports describing observed shaking and damage, making manually parsing and interpreting accounts labor‐intensive. We introduce a novel workflow using Google’s Gemini 2.5 Pro large language model (LLM) to automate the extraction and structuring of macroseismic observations from summary reports. We apply this workflow to the 22 March 1957 M 5.3 Daly City, California, earthquake as a case study. We used Gemini to extract addresses, originally assigned modified Mercalli intensity values, and descriptions from each report. To address coordinate precision limits, addresses were geocoded via Google’s Geocoding application programming interface. This workflow yielded over 2300 geocoded intensity reports for the Daly City earthquake. We use the geocoded accounts, with the original report intensity assignments, to develop a shaking intensity map that in some respects rivals modern Did You Feel It? Maps. We also extract and present data for the 9 February 1971 M L 6.7 Sylmar, California, earthquake. Our results demonstrate the potential of LLMs for reliably extracting and analyzing large, unstructured macroseismic datasets. LLMs offer a scalable solution for rapidly digitizing macroseismic archives, enabling their broader use to constrain ground‐motion models in modern seismic hazard analysis and to improve our understanding of site effects in urban areas. The concepts explored here may also be applied to the handling of other legacy seismological and earth science data.

Seismological Research Letters↗
USGS2025

Reservoir thermal energy storage pre-assessment for the United States

Storing thermal energy underground for later use in electricity production or direct-use heating/cooling is a promising, viable, and economical green energy option. Reservoir thermal energy storage (RTES) is one such option, which stores energy in underutilized permeable strata with low ambient groundwater flow rates and more geochemically evolved (e.g. brackish/saline) waters relative to overlying principal aquifer systems. The U.S. Geological Survey has begun assessing RTES potential nationally by focusing on five generalized geologic regions (Basin and Range, Coastal Plain, Illinois Basin, Michigan Basin, Pacific Northwest) across the United States. Hydrogeologic reservoir models are developed for the following eight metropolitan area cities within those regions to evaluate RTES performance across different climates and subsurface conditions: Albuquerque, New Mexico; Charleston, South Carolina; Chicago and Decatur, Illinois; Lansing, Michigan; Memphis, Tennessee; Phoenix, Arizona; and Portland, Oregon. Evaluated metrics include estimated required well spacing, thermal storage capacity, and thermal recovery efficiency through time. Also considered for each reservoir are potential complicating factors, including reservoir depth, thermally driven free convection, and groundwater salinity. This work focuses on direct-use cooling because the need for cooling modern office buildings greatly exceeds that for heating in most parts of the country (Falta and others, 2016); however, the evaluated metrics are also relevant to heating and electricity applications. Results indicate that favorable RTES conditions exist in each region, with the Coastal Plain and Basin and Range being especially favorable for thermal storage capacity, while the Pacific Northwest and Michigan Basin excel at energy recovery for the evaluated cooling application. The results underscore the utility of developing maps of thermal storage capacity, subsurface temperature models, and volumetric estimates of thermal storage capacity to serve as key RTES resource classification standards. Overall, this pre-assessment provides a basic understanding of RTES potential in several cities and geologic regions throughout the country and will aid ongoing thermal energy storage assessment efforts.

Arizona, Illinois, Michigan, New Mexico, Oregon, S↗
USGS2026

Ice sheet dynamics drive pronounced changes in the subsurface freshwater-saltwater interface

Saltwater is migrating into freshwater aquifers globally with water quality and biogeochemical implications, yet saltwater intrusion in glaciated regions is sparsely investigated. Field observations suggest that groundwater head in glaciated systems is influenced by ice sheet forcings and provides evidence that seawater infiltrated into offshore aquifers during past deglaciation events. To understand links between ice sheet dynamics, groundwater head, and saltwater intrusion, we use numerical models to explore the effects of deglaciation on nearshore head and salinity distributions. We find that ice sheet thinning diminishes groundwater head, and the resulting shift in subsurface pressure gradients drives rapid landward movement of the subsurface freshwater-saltwater interface up to 4.0 km or 1.3 m per m ice sheet loss. Results highlight an overlooked saltwater intrusion mechanism that aligns with field observations and affects glaciated coastlines undergoing ice sheet retreat, underscoring the need to consider this mechanism in studies of contemporary coastal water quality.

Geophysical Research Letters↗
USGS2026

Structural evolution of iron coordination in proteins across Earth’s oxygenation history

Protein metal-binding sites support essential biological functions shaped by protein fold, subunit interactions, and cofactor chemistry. Because these sites encode both biochemical function and environmental constraint, they offer a route to connect protein evolution with changes in Earth’s surface environment through time. Of particular interest is iron (Fe), the most widely used metal in biology and a cofactor central to both anaerobic and aerobic metabolism. Here, we systematically compare the immediate chemical environments of functionally essential Fe-binding sites in three-dimensional protein structures to test whether Fe coordination spheres differ across oxygen contexts. Using a curated dataset of experimentally determined structures, we identify a clear shift in the local chemistry of Fe-binding environments from anaerobic to aerobic proteins. Aerobic Fe sites are significantly more hydrophilic than anaerobic ones, and amino-acid composition analyses show reduced cysteine use in aerobic Fe-binding neighborhoods. These patterns suggest that as Earth’s surface environments became more oxygenated, proteins retained Fe as a core redox metal while reconfiguring local coordination chemistry in ways less vulnerable to oxidative damage. More broadly, this study introduces and applies the Coordination Sphere Analysis and Comparison (CSAC) workflow, an open and archived Python workflow for extracting local metal-binding environments from structure datasets, providing a framework for linking metalloprotein structure to evolutionary and geobiological transitions across Earth history.

Discover Life↗
USGS2026

Monitoring changes in Landsat thermal features in urban and non-urban interfaces from 1986 to 2023 in two international urban centers: Implications for climate and global issues

Rapid urbanization is reshaping thermal environments worldwide, with the strongest impacts occurring at the interface between urban and non-urban areas. Impervious surfaces, as key indicators of urban expansion, are critical for monitoring urban growth and assessing surface urban heat island (SUHI) effects. Land use and land cover change (LULCC) provides an essential link between urban dynamics and their environmental and societal consequences. Here, we integrated the U.S. Geological Survey (USGS) Climate Global Issues (CGI) Land Cover Product with Landsat thermal time-series to investigate SUHI evolution in two contrasting metropolitan regions: Wuhan, China, and Brasília, Brazil. Using data spanning 1986–2023, we analyzed the relationships between land cover, Landsat-based land surface temperature (LST), and SUHI intensity, and identified persistent thermal hotspots. Results demonstrate that the land cover data utilized increases the accuracy of impervious surface mapping along urban–rural gradients. Average SUHI intensities were 3.4 °C in Wuhan and 3.3 °C in Brasília, with statistically significant warming trends of 0.04 °C/year and 0.01 °C/year, respectively. Maximum temperature proved to be a robust indicator of SUHI intensification, capturing long-term upward trends. Our findings highlight the important role of urban land cover dynamics in shaping temporal SUHI variability and hotspot emergence. This prototype framework demonstrates the scientific and policy value of combining long-term land cover monitoring information with satellite thermal monitoring to quantify and track SUHI at city scale, supporting sustainable urban planning and climate adaptation strategies.

Remote Sensing↗