USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geotechnical and Geoenvironmental Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,722 records · Page 85Linked to original sources
USGS2026

Microplastics undergo fragmentation during pressurized membrane filtration

Low-micrometer microplastics (<10 μm) have been detected in drinking water, driving growing interest in using pressure-driven membrane filtration to remove these particles and ensure drinking water safety. However, little attention is paid to the fate of microplastics concentrated in the filtration byproduct. In this study, using well-defined polystyrene (PS) and poly(methyl methacrylate) microspheres as model particles, we observed microplastic fragmentation during nanofiltration and the subsequent release of smaller fragments. After operating for 3 h at 20 bar, 67.9 ± 8.0% of the PS spheres in the concentrate, based on particles counted in selected fields of view, were transformed into fractured particles. The characteristic Raman band signals of microplastics were significantly weakened after fragmentation, leading to detection challenges. To address this, a data processing algorithm was developed to identify PS fragments as small as 1 μm. Preliminary statistical analysis reveals that within the tested pressure range, operation time has a stronger influence on fragmentation than pressure magnitude alone and that fragmentation is further governed by the intrinsic mechanical properties of the tested model polymers. This work provides direct evidence that pressure-driven membrane processes induce microplastic fragmentation and highlights the environmental risks associated with the discharge of fragmented microplastics into the concentrate.

Environmental Science & Technology Letters↗
USGS2025

Overcoming the data limitations in landslide susceptibility modelling

Data-driven models widely used for assessing landslide susceptibility are severely limited by the landslide and environmental data needed to create them. They rely on inventories of past landslide locations, which are difficult to collect and often nonrepresentative. Furthermore, susceptibility maps are most needed in regions without the means to assemble an inventory. To overcome these challenges, we develop a method for assessing shallow landslide susceptibility based on a probabilistic morphometric analysis of the landscape’s topography, rather than the characteristics of landslides. The model assumes that hillslopes with higher relief and gradient compared to the surrounding landscape are more prone to landslides. We demonstrate the superior performance of this approach over contrasting data-driven models across the northwestern United States. As our morphometric model only requires elevation data, it overcomes the major limitations of data-driven models and facilitates the creation of effective susceptibility models in areas where it was previously unfeasible.

Oregon, Washington↗
USGS2026

Ten new insights in climate science 2025

Interdisciplinary understanding is vital for delivering sound climate policy advice. However, navigating the ever-growing and increasingly diverse scholarly literature on climate change is challenging for any individual researcher. This annual synthesis highlights and explains recent advances across a variety of fields of climate change research. This year, the 10 insights focus on: (1) the record-warmth of 2023/2024 and the elevated Earth energy imbalance; (2) acceleration of ocean warming and intensifying marine heatwaves; (3) northern land carbon sinks under strain; (4) reinforcing feedback between biodiversity loss and climate change; (5) accelerated depletion of groundwater; (6) global dengue incidence; (7) global income losses and labour productivity declines; (8) strategic scaling of CDR; (9) integrity challenges in carbon credit markets and emerging responses; and (10) effective policy mixes for emissions reductions. The insights have been written to be accessible to researchers from different fields, serving as entry-points to specific topics, as well as providing an overview of the evolving landscape of climate change research. In the final section, the insights are used to develop overarching policy-relevant messages. This paper provides the basis for a science-policy report that was shared with all Party delegations ahead of COP30 in Belém, Brazil.

Global Sustainability↗
USGS2025

Persistent deep long-period seismicity near the Lassen Volcanic Center

Deep long-period (DLP) earthquakes have been observed at many volcanic settings around the world and linked to the magmatic processes that drive volcanic unrest. At the Lassen Volcanic Center (LVC) of the Cascade arc, limited detection of DLP activity hinders classification of anomalous seismic behavior and its relationship to the LVC magmatic system. This study uses a template matching approach with seismic data from temporary nodal and permanent stations to detect and locate DLP earthquakes near the LVC between 2017 and 2024. Within the DLP catalog of 611 events, a transition occurs from scattered (2017–2020) to oscillatory (2021–2024) occurrence rates. During the oscillatory period, regional earthquakes with large amplitude velocity waveforms observed near the LVC are associated with abrupt changes in DLP occurrence rates. Continued monitoring of DLP activity has the potential to better define the processes that drive volcanic unrest at the LVC in the future.

California↗
USGS2025

Stratigraphic notes—Volume 2, 2025

This is the second volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 .

Professional Paper↗
USGS2026

Stratigraphic notes—Volume 3, 2026

This is the third volume in the U.S. Geological Survey (USGS) series of reports on stratigraphy entitled “Stratigraphic Notes,” which consists of short papers that highlight stratigraphic studies, changes in stratigraphic nomenclature, and explanations of stratigraphic names and concepts used on published geologic maps. “Stratigraphic Notes” is a long-term (multiyear), multivolume publication containing articles that address updates or revisions to stratigraphic nomenclature (and whose content ultimately will be incorporated by National Geologic Map Database personnel into Geolex, https://ngmdb.usgs.gov/Geolex/ ). We welcome papers for the “Stratigraphic Notes” series from geoscientists of the USGS, of State Geological Surveys, and from academicians. Papers can be submitted for publication in “Stratigraphic Notes” by contacting the USGS Geologic Names Committee ( gnc@usgs.gov ). As new “Stratigraphic Notes” volumes are published, links to the volumes will be posted at https://doi.org/10.3133/pp1879 .

Professional Paper↗
USGS1977

Exploratory water well, St. George Island, Florida

A 1,026-foot well was drilled into the Floridan aquifer on St. George Island in search of a supply of water for residential development in 1971. This is the only well on the island on record to have been drilled below 200 feet for water. The well was abandoned; water flowing from the well was saline. It had a specific conductance of 7,500 micromhos per centimeter at 25° Celsius. The specific conductances of samples taken at drilling depths 217-1,026 feet ranged from 3,140 to 39,600, with the maximum value at 470 ft. A composite geophysical and lithologic log of the well shows spontaneous potential, single-point resistance, gamma-ray, neutron, gamma-gamma, and caliper logs. Well-site notes, a written description of cuttings samples, a graph showing the relation of specific conductance of water samples to the depth of the well at time of sampling, and four chemical analyses of the water are included in the report.

Florida↗
USGS2024

On algorithmically determined versus traditional macroseismic intensity assignments

The utility of macroseismic data, defined as the effects of earthquakes on humans and the built environment, has been increasingly recognized following the advent of online systems that now produce unprecedented volumes of macroseismic intensity information. Contributed reports from the U.S. Geological Survey “Did You Feel It?” (DYFI) system ( Wald et al ., 1999 ) are used to generate intensity values with an algorithm based on seminal work by Dengler and Dewey (1998) . The algorithm was developed initially to reproduce intensity values assigned by expert opinion using questionnaire results collected by telephone survey. In this article, I discuss reasons why intensity values from (self‐selected) DYFI responses can differ from values that would be assigned by expert opinion given more complete data from randomly selected participants. For example, with the data used by Dengler and Dewey (1998) , intensities near 4 could be determined from the percentage of people who felt shaking in each town. With less spatially rich data from self‐selected participants, this percentage often cannot be determined reliably. Audible noises are key additional diagnostic criteria for modified Mercalli intensity (MMI) 4, but, although the DYFI system includes a question about noise, following Dengler and Dewey (1998) , the DYFI algorithm does not include a noise indicator. At the upper end of the scale, as defined the DYFI algorithm yields a maximum intensity value of 9.05, nominally corresponding to peak ground acceleration of 75% g . These and other factors can result in DYFI values that are low compared to traditional MMI values assigned using expert opinion, even absent factors that can bias traditional MMI assignments. Modern ground‐motion intensity conversion equations determined using DYFI intensities are expected to be appropriate for DYFI intensities, but the results of this study suggest that biases may be introduced if DYFI and traditional intensities are assumed to be interchangeable.

Seismological Research Letters↗
USGS2025

Evaluation of daily stream temperature predictions (1979-2021) across the contiguous United States using a spatiotemporal aware machine learning algorithm

Stream temperature controls a variety of physical and biological processes that affect ecosystems, human health, and economic activities. We used 42 years (1979–2021) of data to predict daily summary statistics of stream temperature across >50,000 stream reaches in the contiguous United States using a recurrent graph convolution network. We comprehensively documented the performance – both across all reaches and by stream type (e.g., reservoir or groundwater influence) – as a baseline for future improvement. The model showed reach-level RMSE of <2 °C with 90 % prediction intervals that contain 90.7 % of observations. We also assessed how the model captured variability in ecologically relevant metrics (e.g., R 2 for annual 7-day maximum = 0.76; R 2 for days exceeding 25 °C = 0.75). This model does not outperform state-of-the-art machine learning efforts (e.g., RMSE ≤1.5 °C) due to a limited input set but does provide the most spatially complete modeling to date to support water availability assessments.

contiguous United States↗
USGS2025

2023 Earthquake Ground-Motion Workshop for the Central and Eastern United States, with a focus on the Gulf and Atlantic Coastal Plains—Agenda and abstracts

The U.S. Geological Survey held a virtual workshop December 7–8, 2023, to share research and ideas about earthquake ground motions in the Central and Eastern United States, with a focus on the Atlantic and Gulf Coastal Plains. The workshop was organized to learn about potential regionalization of ground-motion characteristics (source, path, and site), consider new explanatory variables for site response, and hear and discuss updates on ground-motion research on the Atlantic and Gulf Coastal Plains. The workshop was organized into a series of contributed presentations and three panel discussions held during 2 days. This report documents the agenda, contributed abstracts, and panel summaries.

Scientific Investigations Report↗
USGS2026

Modeling future groundwater depletion to evaluate sustainability goals set under the Sustainable Groundwater Management Act in the critically overdrafted basins of the Central Valley, California, USA (2020–2070)

In 2014, California's Sustainable Groundwater Management Act (SGMA) mandated local agencies to devise and implement groundwater sustainability plans to address critically overdrafted conditions throughout the state's aquifers. However, the feasibility of these agencies' sustainability goals has not previously been assessed through a regional-scale, integrative lens. Here, we develop and analyze a novel, basin-wide database of 936 sustainability indicator wells located within Central Valley subbasins designated as critically overdrafted, most of which lie in the San Joaquin Valley. Our database shows 2040 groundwater elevation goals vary widely from 60 m above to 80 m below 2020 levels, with variability within and between adjacent subbasins. To evaluate the feasibility of achieving these goals, we coupled the database with a regional hydrologic model (Central Valley Hydrologic Model version 2) and simulated multiple future pumping scenarios. Results show that under increased groundwater demand, 60%–70% of indicator wells may fail to meet their 2040 goals. Even a 50% reduction from 2020 demand levels leaves nearly 40% of wells failing to meet their sustainability thresholds by 2040. Baseline models show that by 2070, up to 70% of wells could fail to meet their goals due to large-scale, spatially connected regions of groundwater depletion. This integrated framework, linking the first region-wide compilation of SGMA indicator wells with a regional groundwater model, demonstrates that many local sustainability goals may be unattainable with substantial (up to 50%) reductions in pumping. Additional management interventions, such as expanded recharge or coordinated demand reductions, may help achieve sustainability goals.

California↗
USGS2025

Groundwater response to managed aquifer recharge at the Southeast Houghton Artificial Recharge Project in Tucson, Arizona

Managed aquifer recharge is a widespread practice for storing water in the subsurface as groundwater. At a managed aquifer recharge facility in southern Arizona, groundwater-level and repeat microgravity data were collected to monitor aquifer response. These data were used to inform parameter identification for an unsaturated-zone flow model used to simulate the recharge process. The facility, the Southeast Houghton Artificial Recharge Project (SHARP), consists of 3 surface basins (about 27,600 square meters [6.8 acres] total surface area) where recycled water is distributed in recharge cycles lasting several months, with dry periods in between. During the study period, December 2020–December 2022, Tucson Water (the City of Tucson’s water utility) reported 6.56×10 6 cubic meters of water (5,320 acre-feet) recharged. Monitoring included groundwater-level observations at 3 monitoring wells and repeat microgravity measurements at as many as 22 locations (some stations were destroyed between surveys). Six gravity surveys were carried out using absolute- and relative-gravity meters. Large gravity increases, more than 250 microgals, were observed during the first repeat survey, 3.5 months after the start of recharge, but only in the immediate vicinity of the recharge basins. Data show that water moved downward to the water table, and storage changes in the unsaturated zone away from the facility were likely minimal. Gravity decreased at stations more than 1 kilometer from the facility, consistent with regional groundwater-level changes. Groundwater-level increases in wells adjacent to the recharge basins began 2 months after the second repeat gravity survey, and 5.5 months after recharge began. Unsaturated-zone flow modeling was carried out using software that simulates water movement and parameter estimation. Model calibration was carried out by minimizing an objective function calculated from the differences between simulated and observed groundwater levels, and between simulated and observed repeat microgravity data. Including repeat microgravity data in the objective function reduced the uncertainty in estimated parameter values for saturated hydraulic conductivity and saturated water content. Modeling indicated that the unsaturated zone between the recharge basins and the water table does not become saturated even after 685 days of simulated infiltration. This gradual wetting may account for increasing infiltration rates over time, as hydraulic conductivity increases with increasing water content. Unsaturated-zone water content decreased rapidly between recharge cycles. Model-simulated groundwater mounding extended about 1 kilometer from the center of SHARP after the 685-day period following the onset of recharge.

Arizona↗
USGS2026

Compact seismicity bursts have different characteristics from regional seismicity

Earthquakes tend to cluster, developing into sequences driven by stress perturbations and transient fault-zone processes. Depending on the driving process, earthquake sequences show differing behaviors. This variability challenges our ability to observe or distinguish these driving processes in high resolution. Here we systematically identify seismicity bursts throughout southern California using new statistical methods and examine their causes with other independent geophysical observations. Seismicity bursts are defined as statistically significant seismicity rate anomalies. Our approach has the advantage of being data driven, depending on few earthquake occurrence assumptions. We find abundant seismicity bursts across southern California, most frequently occurring along the San Jacinto Fault and in the Salton Sea and Coso geothermal fields. These seismicity bursts are highly compact in space and time, often encompassed by a 5 km radius and have durations less than 10 hr. Many of the seismicity bursts have their largest earthquake near the beginning of the sequence, but the largest earthquake is usually not an obvious mainshock. We utilize a variety of independent geophysical data sets to analyze the characteristics of the seismicity bursts, finding that the seismicity bursts have low b-values, low spectral stress drops, and varied stress ratios compared to regional seismicity. These differences suggest that seismicity bursts are driven by transient processes acting frequently across fault networks.

California↗
USGS2026

USGS Geochron Database

Introduction Geochronology helps us understand Earth’s history by determining when important events, like volcanic eruptions, the rise of mountains, the formation of mineral resources, and changes in the landscape, happened. Geochronological data directly support geologic mapping and can inform decisions about geologic hazard mitigation, natural resource management, and infrastructure resilience. The U.S. Geological Survey (USGS) Geochron database provides access to more than 300,000 published, publicly available age measurements from more than 40,000 geological samples. This database is the result of a collaborative effort with State geological surveys and geoscientists from across the globe. The USGS Geochron database is the most comprehensive collection of geochronological data available for the United States. Users can view data through an interactive map explorer, download datasets, and integrate data into geospatial software or other analysis tools.

Fact Sheet↗
USGS2026

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗
USGS2024

Automated, near real-time ground-motion processing at the U.S. Geological Survey

We describe automated ground‐motion processing software named gmprocess that has been developed at the U.S. Geological Survey (USGS) in support of near‐real‐time earthquake hazard products. Because of the open‐source development process, this software has benefitted from the involvement and contributions of a broad community and has been used for a wider range of applications than was initially envisioned. Here, we give an overview and introduction to the software, including how it has leveraged other open‐source libraries. We highlight some key features that gmprocess provides, compare response spectra calculated with the automated processing approach of gmprocess to the response spectra provided by the Next Generation Attenuation projects, and summarize projects that have utilized gmprocess. These use‐cases demonstrate that this software development effort has been successfully leveraged in earthquake research activities both within and outside the USGS.

Seismological Research Letters↗
USGS2025

Bølling-Allerød productivity in the subarctic Pacific driven by seasonal upwelling

The Bølling-Allerød deglacial event is marked by high diatom productivity and opal deposition throughout the subarctic Pacific. This opal could either constitute a strengthened biological pump and thus carbon sequestration, or a weakened biological pump and release of marine-sequestered CO 2 to the atmosphere. We quantify silicic acid supply at IODP Site U1340 in the Bering Sea using biogenic opal and δ 30 Si of Coscinodiscus , a diatom genus. These records, along with diatom environmental indicators, suggest the Bølling-Allerød had high silicic acid availability related to a shift from stratification to seasonal upwelling dynamics. We thus propose the primary cause of the high productivity event was increased macronutrient supply from vertical exchange that injected old, nutrient-rich, CO 2 -rich waters into the surface. Enhanced CO 2 release from the subarctic Pacific may help explain critical intervals of CO 2 rise that occur at the onsets of the Bølling-Allerød and PreBoreal.

Geophysical Research Letters↗
USGS2025

Estimating earthquake source depth using teleseismic broadband waveform modeling at the USGS National Earthquake Information Center

The U.S. Geologic Survey National Earthquake Information Center (NEIC) monitors global seismicity, producing a catalog of earthquake source parameters in near-real-time to provide information that can help mitigate the societal impact of earthquakes. The NEIC commonly relies on teleseismic observations to constrain earthquake source parameters (e.g., location, depth, magnitude, and mechanism) due to a lack of local and regional observations. For these ‘teleseismic’ events, depth phase (i.e., pP , sP ) arrival time observations provide the best estimate on source depth. However, depth phases are often difficult to accurately identify and/or pick. Therefore, NEIC relies on waveform modeling, such as those determined from W-phase ( M ww ), body wave ( M wb ), and regional ( M wr ) moment tensor estimations, to provide constraints on source depth. While depth estimates from these approaches are informative, higher frequency observations provide more precise estimates because depth phases are more prominently observed at higher frequencies. Here, we present NEIC’s relatively high-frequency (~0.04 to 1 Hz) teleseismic waveform modeling approach, termed Synthetic Depth Phase Modeling (SynDepth), for determining source depth. SynDepth was developed to provide NEIC with a tool that enables rapid, accurate, and quantifiable estimates of earthquake source depth in cases where locator depths are not reliable. This relatively simple and fast procedure searches over 1 km-incremented source depths and an expanding triangular source-time function to find the best-fitting solution. We compare automatic SynDepth solutions for a dataset of 1,216 earthquakes (M5.5-M7.6) between 2017 and 2021 to NEIC-derived depth estimates from other methods. Our approach provides a robust depth estimate for earthquakes lacking local arrival time data, and it minimizes the need for analyst review of depth-phase picks ( pP , sP ) or using predefined ‘fixed’ depths.

Seismological Research Letters↗