USGS Science⌕ Search

SEARCH · USGS Science

Results for “Internal Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,531 records · Page 85Linked to original sources

Proceedings of the 2015 international summit on fibropapillomatosis: Global status, trends, and population impacts

The 2015 International Summit on Fibropapillomatosis (FP) was convened in Honolulu, Hawaii June 11-14, 2015. Scientists from around the world were invited to present results from sea turtle monitoring and research programs as they relate to the global status, trends, and population impacts of FP on green turtles. The participants engaged in discussions that resulted in the following conclusions: 1.Globally, FP has long been present in wild sea turtle populations the earliest mention was in the late 1800s in the Florida Keys. 2.FP primarily affects medium-sized immature turtles in coastal foraging pastures. 3.Expression of FP differs across ocean basins and to some degree within basins. Turtles in the Southeast US, Caribbean, Brazil, and Australia rarely have oral tumors (inside the mouth cavity), whereas they are common and often severe in Hawaii. Internal tumors (on vital organs) occur in the Atlantic and Hawaii, but only rarely in Australia. Liver tumors are common in Florida but not in Hawaii. 4.Recovery from FP through natural processes, when the affliction is not severe, has been documented in wild populations globally. 5.FP causes reduced survivorship, but documented mortality rates in Australia and Hawaii are low. The mortality impact of FP is not currently exceeding population growth rates in some intensively monitored populations (e.g., Florida, Hawaii) as evidenced by increasing nesting trends despite the incidence of FP in immature foraging populations. 6.Pathogens, hosts, and potential disease and environmental cofactors have the capacity to change; while we are having success now, there needs to be continued monitoring to detect changes in the distribution, occurrence, and severity of the disease. 7.While we do not have clear evidence to provide the direct link, globally, the preponderance of sites with a high frequency of FP tumors are areas with some degree of degradation resulting from altered watersheds. Watershed management and responsible coastal development may be the best approach for reducing the spread and prevalence of the disease. 8.Future research efforts should employ a multi-factorial ecological approach (e.g., virology, parasitology, genetics, health, diet, habitat use, water quality, etc.) since there are likely several environmental cofactors involved in the expression of the disease, which is still thought to be caused by a herpesvirus. 9.Minimum FP data collection in new areas should include: individual identification (photo ID, PIT tags, etc.), standard measurements (length and weight), presence/absence of tumors, tumor severity, body condition, oral examination, method of capture, and effort

NOAA Technical Memorandum↗

Potential for spatial coexistence of a transboundary migratory species and wind energy development

Global expansion in wind energy development is a notable achievement of the international community’s effort to reduce carbon emissions during energy production. However, the increasing number of wind turbines have unintended consequences for migratory birds and bats. Wind turbine curtailment and other mitigation strategies can reduce fatalities, but improved spatial and temporal data are needed to identify the most effective way for wind energy development and volant migratory species to coexist. Mexican free-tailed bats ( Tadarida brasiliensis mexicana ) account for a large proportion of known bat fatalities at wind facilities in the southwestern US. We examined the geographic concordance between existing wind energy generation facilities, areas of high wind potential amenable for future deployment of wind facilities, and seasonally suitable habitat for these bats. We used ecological niche modeling to determine species distribution during each of 4 seasons. We used a multi-criteria GIS-based approach to produce a wind turbine siting suitability map. We identified seasonal locations with highest and lowest potential for the species’ probability of occurrence, providing a potential explanation for the higher observed fatalities during fall migration. Thirty percent of 33,606 wind turbines within the southwestern US occurred in highly suitable areas for Mexican free-tailed bats, primarily in west Texas. There is also broad spatial overlap between areas of high wind potential and areas of suitable habitat for Mexican free-tailed bats. Because of this high degree of overlap, our results indicate that post-construction strategies, such as curtailing the timing of operations and deterrents, would be more effective for bat conservation than strategic siting of new wind energy installations.

Scientific Reports↗

Opportunities to improve alignment with the FAIR Principles for U.S. Geological Survey data

In 2016, an interdisciplinary, international group of 53 scientists introduced a framework named “the FAIR Principles” for addressing 21st century scientific data challenges. The FAIR Principles are increasingly used as a guide for producing digital scientific products that are findable, accessible, interoperable, and reusable (FAIR), especially to enable use of such products in automated systems. Data aligned with the FAIR Principles can increase the efficiency of science integration capabilities such as those envisioned for the U.S. Geological Survey (USGS) Earth Monitoring, Analyses, and Projections (EarthMAP) initiative. The FAIR Principles clearly define the characteristics of reusable scientific products, but it is less clear how to facilitate consistency in achieving these characteristics across the Bureau. USGS data are produced by local research projects distributed over more than 100 centers in 7 regions. After data are approved for release, they could be managed in numerous repositories and online data systems. The diversity of USGS data is illustrated by the topical range of the USGS mission areas: Core Science Systems, Ecosystems, Energy and Minerals, Natural Hazards, and Water Resources. In the USGS context, realizing the EarthMAP vision for automated, predictive, integrated science that provides timely and actionable results involves providing knowledge and support services and developing the skills, infrastructure, and culture to enable Bureau-wide implementation of the FAIR Principles. In 2019, the USGS Community for Data Integration funded a project to convene a broadly representative workshop and produce recommendations to enable consistency with the FAIR Principles across the USGS. The workshop, held in Fort Collins, Colorado, in September 2019, brought together 28 participants for 3 days to engage with the FAIR Principles, analyze USGS use cases, and discuss the roles of data producers and managers, data storage and catalogs, value-added services, and policy makers in implementing the FAIR Principles. Workshop participants agreed that scientific reproducibility requires the extension of the FAIR Principles beyond measured data to include physical samples, research methods, software, and tools at the USGS. Workshop discussions focused on how the USGS can implement the FAIR Principles by supporting research teams in creating data, metadata, and other scientific products and also by supporting enterprise systems that maintain and leverage the products’ consistency with the FAIR Principles. The resulting FAIR roadmap of recommendations describes nine proposed interdependent strategies that could be achieved by coordinated actions taken by different parts of the USGS. A proposed early action would be the creation of a coordinating council that includes representatives from the groups engaged in activities consistent with better alignment with the FAIR Principles. The nine proposed strategies, which are presented in more detail in this roadmap report, focus on enabling improvements to individual data products, providing infrastructure, and structuring administrative activities to support an organizational culture that values the FAIR Principles.

Open-File Report↗

Global irrigated area map (GIAM), derived from remote sensing, for the end of the last millennium

A Global Irrigated Area Map (GIAM) has been produced for the end of the last millennium using multiple satellite sensor, secondary, Google Earth and groundtruth data. The data included: (a) Advanced Very High Resolution Radiometer (AVHRR) 3-band and Normalized Difference Vegetation Index (NDVI) 10 km monthly time-series for 1997-1999, (b) Syste me pour l'Observation de la Terre Vegetation (SPOT VGT) NDVI 1 km monthly time series for 1999, (c) East Anglia University Climate Research Unit (CRU) rainfall 50km monthly time series for 1961-2000, (d) Global 30 Arc-Second Elevation Data Set (GTOPO30) 1 km digital elevation data of the World, (e) Japanese Earth Resources Satellite-1 Synthetic Aperture Radar (JERS-1 SAR) data for the rain forests during two seasons in 1996 and (f) University of Maryland Global Tree Cover 1 km data for 1992-1993. A single mega-file data-cube (MFDC) of the World with 159 layers, akin to hyperspectral data, was composed by re-sampling different data types into a common 1 km resolution. The MFDC was segmented based on elevation, temperature and precipitation zones. Classification was performed on the segments. Quantitative spectral matching techniques (SMTs) used in hyperspectral data analysis were adopted to group class spectra derived from unsupervised classification and match them with ideal or target spectra. A rigorous class identification and labelling process involved the use of: (a) space-time spiral curve (ST-SC) plots, (b) brightness-greenness-wetness (BGW) plots, (c) time series NDVI plots, (d) Google Earth very-high-resolution imagery (VHRI) 'zoom-in views' in over 11 000 locations, (e) groundtruth data broadly sourced from the degree confluence project (3 864 sample locations) and from the GIAM project (1 790 sample locations), (f) high-resolution Landsat-ETM+ Geocover 150m mosaic of the World and (g) secondary data (e.g. national and global land use and land cover data). Mixed classes were resolved based on decision tree algorithms and spatial modelling, and when that did not work, the problem class was used to mask and re-classify the MDFC, and the class identification and labelling protocol repeated. The sub-pixel area (SPA) calculations were performed by multiplying full-pixel areas (FPAs) with irrigated area fractions (IAFs) for every class. A 28 class GIAM was produced and the area statistics reported as: (a) annualized irrigated areas (AIAs), which consider intensity of irrigation (i.e. sum of irrigated areas from different seasons in a year plus continuous year-round irrigation or gross irrigated areas), and (b) total area available for irrigation (TAAI), which does not consider intensity of irrigation (i.e. irrigated areas at any given point of time plus the areas left fallow but 'equipped for irrigation' at the same point of time or net irrigated areas). The AIA of the World at the end of the last millennium was 467 million hectares (Mha), which is sum of the non-overlapping areas of: (a) 252 Mha from season one, (b) 174 Mha from season two and (c) 41 Mha from continuous year-round crops. The TAAI at the end of the last millennium was 399 Mha. The distribution of irrigated areas is highly skewed amongst continents and countries. Asia accounts for 79% (370 Mha) of all AIAs, followed by Europe (7%) and North America (7%). Three continents, South America (4%), Africa (2%) and Australia (1%), have a very low proportion of the global irrigation. The GIAM had an accuracy of 79-91%, with errors of omission not exceeding 21%, and the errors of commission not exceeding 23%. The GIAM statistics were also compared with: (a) the United Nations Food and Agricultural Organization (FAO) and University of Frankfurt (UF) derived irrigated areas and (b) national census data for India. The relationships and causes of differences are discussed in detail. The GIAM products are made available through a web portal (http://www.iwmigiam.org). ?? 2009 Taylor & Francis.

International Journal of Remote Sensing↗

Luminescence ages and new interpretations of the timing and deposition of Quaternary sediments at Natural Trap Cave, Wyoming

Natural Trap Cave, located in the Big Horn Mountains of north-central Wyoming, has a history of trapping and preserving a range of North American fauna that plummeted into the deep vertical entrance. These animal remains were buried and preserved within sediments of the main chamber and, in turn, have helped elucidate the procession of faunal dynamics during the latest glacial cycle. The cave location, south of the Laurentide and Cordilleran Ice Sheets, and proximal to Yellowstone, is at an ideal geographical juncture to provide insights to ecological changes in North America. The sediments that the animals are buried in inform us about transport and deposition both inside and outside of the cave that relate to catchment dynamics. We report on a series of optically stimulated luminescence (OSL) ages derived from samples obtained within the cave during excavation work in 2014 and in 2018. We also examine chronology produced by argon, tephrochronology, fission track, and luminescence techniques that have been used for understanding the infilling of the cave. The cave sediment ages and in situ measured gamma spectroscopy as measured in this study helped resolve an improved chronological age model when combined with previous data. The suite of OSL ages is interpreted through the stratigraphic relationships (and vertebrates contained within) which requires the use of an adequate age model; we use either the central age model or minimum age model where appropriate and with justification. Lowest sediments are dated to ∼150 ka with a hiatus at ∼130 to 52 ka. Above this, sediment deposition and entrainment of paleontological materials are representative of Pleistocene and early Holocene times, between 37 ± 6 ka and 7.6 ± 0.5 ka. The stratigraphic architecture suggests that deposition of materials into the cave is episodic and rapid, followed by quiescent periods where hydrologic scour, heavy overland flow , or possibly a cryo-hydrologic process may have altered unit relationships. Thus, the complementary geochronometers and the characteristics of quartz versus feldspar luminescence signals improve temporal interpretations of these complex deposits. This adapted understanding of mixing also sets the stage for future work with the aim to improve our understanding of ages and sources for ash units within these cave deposits. The three ash units recognized in the cave may represent an in-situ reworking of the same ash or may be representative of previously undocumented eruptions from the Yellowstone Caldera.

Wyoming↗

The coefficient of friction of chrysotile gouge at seismogenic depths

We report new strength data for the serpentine mineral chrysotile at effective normal stresses, σ n between 40 and 200 MPa in the temperature range 25°-280°C. Overall, the coefficient of friction, μ (= shear stress/effective normal stress) of water-saturated chrysotile gouge increases both with increasing temperature and σ n , but the rates vary and the temperature-related increases begin at ~100°C. As a result, a frictional strength minimum (μ = 0.1) occurs at low σ n at about 100°C. Maximum strength (μ = 0.55) results from a combination of high normal stress and high temperature. The low-strength region is characterized by velocity strengthening and the high-strength region by velocity-weakening behavior. Thoroughly dried chrysotile has μ = 0.7 and is velocity-weakening. The frictional properties of chrysotile can be explained by its tendency to adsorb large amounts of water that acts as a lubricant during shear. The water is progressively driven off the fiber surfaces with increasing temperature and pressure, causing chrysotile to approach its dry strength. Depth profiles for a chrysotile-lined fault constructed from these data would pass through a strength minimum at ~3 km depth, where sliding should be stable. Below that depth, strength increases rapidly as does the tendency for unstable (seismic) slip. Such a trend would not have been predicted from the room-temperature data. These results therefore illustrate the potential hazards of extrapolating room-temperature friction data to predict fault zone behavior at depth. This depth profile for chrysotile is consistent with the pattern of slip on the Hayward fault, which creeps aseismically at shallow depths but which may be locked below 5 km depth.

International Geology Review↗

Environmental Assessment for a Marine Geophysical Survey of Parts of the Arctic Ocean, August-September 2010

According to the United Nations Convention on the Law of the Sea (UNCLOS), individual nations? sovereign rights extend to 200 nautical miles (n.mi.) (370 km) offshore or to a maritime boundary in an area called the continental shelf. These rights include jurisdiction over all resources in the water column and on and beneath the seabed. Article 76 of UNCLOS also establishes the criteria to determine areas beyond the 200 n.mi. (370 km) limit that could be defined as ?extended continental shelf,? where a nation could extend its sovereign rights over the seafloor and sub-seafloor (As used in UNCLOS, ?continental shelf? refers to a legally defined region of the sea floor rather than a morphological shallow-water area adjacent to continents commonly used by geologists and hydrographers.). This jurisdiction provided in Article 76 includes resources on and below the seafloor but not in the water column. The United States has been acquiring data to determine the outer limits of its extended continental shelf in the Arctic and has a vested interest in declaring and receiving international recognition of the reach of its extended continental shelf. The U.S. collaborated with Canada in 2008 and 2009 on extended continental shelf studies in the Arctic Ocean. The U.S. Coast Guard (USCG) Cutter Healy worked with the Canadian Coast Guard ship Louis S. St. Laurent to map the continental shelf beyond 200 n.mi. (370 km) in the Arctic. Each icebreaking vessel contributed different capabilities in order to collect data needed by both nations more efficiently in order to save money, avoid redundancy, and foster cooperation. Generally, the Healy collects bathymetric (sea-floor topography) data and the Louis S. St. Laurent collects seismic reflection profile data. The vessels work in concert when ice conditions are heavy, with one vessel breaking ice for the ship collecting data. The Canadian Environmental Assessments for these projects are available on line at http://www.ceaa.gc.ca/052/details-eng.cfm?pid=38185 (2008) and http://www.ceaa.gc.ca/052/details-eng.cfm?pid=46518 (2009). The U.S. Geological Survey (USGS) and Geological Survey of Canada (GSC) are undertaking a similar partnership again for 2010 in a limited area of U.S. waters during the period between ~10 and 16 August. The survey vessels will then proceed to international or Canadian waters where surveying will proceed until ~3 September, when the two icebreakers will separate to conduct independent work. The survey area of the joint work will be bounded approximately by 145? to 158? W longitude and 71? to 84? N latitude in water depths ranging from ~2,000 to 4,000 m (fig. 1). Ice conditions are expected to range from open water to 10/10 ice cover. The Louis S. St. Laurent will join accompanying vessel Healy in or near the survey area around 10 August to begin the joint survey work. As its energy source, the seismic system aboard Louis S. St. Laurent will employ a 3-airgun array consisting of three Sercel G-airguns. Two guns will have a discharge volume of 500 in3 and the third a discharge volume of 150 in3 for a total array discharge volume of 1,150 in3. The seismic survey will take place in water depths 2,000?4,000 m. This airgun array is identical to the system used in the 2008 and 2009 field programs by the Geological Survey of Canada. The USGS requested that the National Marine Fisheries Service (NMFS) issue an Incidental Harassment Authorization (IHA) to authorize the incidental, that is, not intentional, harassment of small numbers of cetaceans and seals should this occur during the seismic survey in U.S. waters. USGS is also consulting with the U.S. Fish and Wildlife Service (USFWS) regarding concerns about disturbance to walruses and polar bears. Through informal consultation with the Office of Protected Resources with the National Oceanic and Atmospheric Administration (NOAA), USGS proposes that no ESA-listed marine species?bowhead, fin, humpback or sperm whale?w

Open-File Report↗

The Volcano Disaster Assistance Program—Helping to save lives worldwide for more than 30 years

What do you do when a sleeping volcano roars back to life? For more than three decades, countries around the world have called upon the U.S. Geological Survey’s (USGS) Volcano Disaster Assistance Program (VDAP) to contribute expertise and equipment in times of crisis. Co-funded by the USGS and the U.S. Agency for International Development’s Office of U.S. Foreign Disaster Assistance (USAID/OFDA), VDAP has evolved and grown over the years, adding newly developed monitoring technologies, training and exchange programs, and eruption forecasting methodologies to greatly expand global capabilities that mitigate the impacts of volcanic hazards. These advances, in turn, strengthen the ability of the United States to respond to its own volcanic events. VDAP was formed in 1986 in response to the devastating volcanic mudflow triggered by an eruption of Nevado del Ruiz volcano in Colombia. The mudflow destroyed the city of Armero on the night of November 13, 1985, killing more than 25,000 people in the city and surrounding areas. Sadly, the tragedy was avoidable. Better education of the local population and clear communication between scientists and public officials could have allowed warnings to be received, understood, and acted upon prior to the disaster. VDAP strives to ensure that such a tragedy will never happen again. The program’s mission is to assist foreign partners, at their request, in volcano monitoring and empower them to take the lead in mitigating hazards at their country’s threatening volcanoes. Since 1986, team members have responded to over 70 major volcanic crises at more than 50 volcanoes and have strengthened response capacity in 12 countries. The VDAP team consists of approximately 20 geologists, geophysicists, and engineers, who are based out of the USGS Cascades Volcano Observatory in Vancouver, Washington. In 2016, VDAP was a finalist for the Samuel J. Heyman Service to America Medal for its work in improving volcano readiness and warning systems worldwide, helping countries to forecast eruptions, save lives, and reduce economic losses while enhancing America’s ability to respond to domestic volcanic events.

Fact Sheet↗

Seismic-reflection and sidescan-sonar data collected on the Potomac River, Maryland and Virginia, during May 1979

The U.S. Geological Survey collected 2,170 line kilometers of single-channel seismic-reflection profiles and sidescan sonar records on the Potomac River during R/V NEECHO cruise NE-3-79 in May 1979. The purposes of the survey were to define: (1) areas of sediment accumulation and erosion; (2) the thickness of Holocene sediments; (3) the internal structure of the near-surface sediments; (4) the types of bottom topography; and (5) the general geologic framework of the tidal river and estuary. The survey utilized a variety of acoustic systems. Bottom data were obtained by using a Raytheon _ 1 / model DE-719 fathometer (200 kHz) and an EDO Western model 606 sidescan-sonar system (100 kHz). Subbottom data were collected with a 7-kHz Raytheon model PTR-106 system and a small airgun system (170-645 Hz band pass; l in 3 chamber). An EDO Western sidescan fish (model 604-150) coupled with a 2.5-kHz seismic-reflection system also was used during the longitudinal run up the river. The totals for the ,various kinds of data collected were 481 line kilometers each of fathometer, sidescan sonar, 7-kHz, and airgun records, and 246 line kilometers of 2.5-kHz records. Positional control for all tracklines was provided by frequent radar fixes, by dead reckoning, and by sightings on buoys, landmarks, and other navigational aids. The quality of the acoustic records varied with location in the river. Good fathometer and sidescan-sonar records were collected along all tracklines. However, because of the nature of the sediments within some sections of the river, the degree of subbottom penetration in many places was limited. In general, the subbottom penetration and resolution were poor in the upper and middle reaches of the river, whereas the subbottom records from the lower reach usually were quite good. The original records may be examined at the U.S. Geological Survey, Woods Hole, MA 02543. Microfilm copies of the data are available for purchase from the National Geophysical and Solar-Terrestrial Data Center (NGSDC), Boulder, CO 80303.

Maryl;Virginia↗

Bathymetric map, surface area, and stage-capacity for the U.S. part of Lake Koocanusa, Lincoln County, Montana, 2016–18

The U.S. Geological Survey and U.S. Army Corps of Engineers collected high-resolution multibeam sonar data during 2016–18 to compute stage-area and stage-capacity tables for the U.S. part of Koocanusa Reservoir in Lincoln County, northwestern Montana. Koocanusa Reservoir is a transboundary reservoir extending about 48 miles from Libby Dam upstream to the U.S. international boundary with Canada and another 42 miles within Canada to near Wardner, British Columbia. The upstream extent of the reservoir within Canada, where much of the sedimentation was previously documented, was not included in this study. Previously developed stage-area and stage-capacity tables were developed for the entire reservoir and could not be directly compared to the stage-area and stage-capacity tables from this study. Two discrete stage-area and stage-capacity values from the original survey (unknown survey date prior to 1980) were available for parts of the reservoir within the United States at the normal full-pool and normal minimum-pool elevations (2,459 and 2,287 U.S. survey feet above the National Geodetic Vertical Datum of 1929, respectively). At the normal full-pool elevation, the stage-area relation resulted in a 0.06-percent increase in surface-water acreage. Conversely, a 0.03-percent decrease in storage capacity at the normal full-pool elevation occurred. At the normal-minimum-pool elevation, the stage-area relation showed a 1.21-percent decrease in surface water from 14,487 to 14,314 acres. The usable storage capacity, defined as the volume of water between the normal full-pool and normal minimum-pool elevations, decreased by 0.39 percent (15,353 acre-feet). Results from this study indicate that a relatively minimal amount of sedimentation has occurred since initial filling in Koocanusa Reservoir for parts of the reservoir within the United States. Updated stage-area and stage-capacity tables for the entire reservoir will require additional bathymetric and topographic surveys for the parts of Koocanusa Reservoir within Canada.

Montana↗

Batrachochytrium salamandrivorans (Bsal) not detected in an intensive survey of wild North American amphibians

The salamander chytrid fungus (Batrachochytrium salamandrivorans [Bsal]) is causing massive mortality of salamanders in Europe. The potential for spread via international trade into North America and the high diversity of salamanders has catalyzed concern about Bsal in the U.S. Surveillance programs for invading pathogens must initially meet challenges that include low rates of occurrence on the landscape, low prevalence at a site, and imperfect detection of the diagnostic tests. We implemented a large-scale survey to determine if Bsal was present in North America designed to target taxa and localities where Bsal was determined highest risk to be present based on species susceptibility and geography. Our analysis included a Bayesian model to estimate the probability of occurrence of Bsal given our prior knowledge of the occurrence and prevalence of the pathogen. We failed to detect Bsal in any of 11,189 samples from 594 sites in 223 counties within 35 U.S. states and one site in Mexico. Our modeling indicates that Bsal is highly unlikely to occur within wild amphibians in the U.S. and suggests that the best proactive response is to continue mitigation efforts against the introduction and establishment of the disease and to develop plans to reduce impacts should Bsal establish.

Continental United States↗

Tectonic and metallogenic model for northeast Asia, Chapter 9 in Metallogenesis and tectonics of northeast Asia

The major purposes of this chapter are to provide (1) an overview of the regional geology, tectonics, and metallogenesis of Northeast Asia for readers who are unfamiliar with the region, (2) a general scientific introduction to the succeeding chapters of this volume, and (3) an overview of the methodology of metallogenic and tectonic analysis used in this study. We also describe how a high-quality metallogenic and tectonic analysis, including construction of an associated metallogenic-tectonic model will greatly benefit other mineral resource studies, including synthesis of mineral-deposit models; improve prediction of undiscovered mineral deposit as part of a quantitative mineral-resource-assessment studies; assist land-use and mineral-exploration planning; improve interpretations of the origins of host rocks, mineral deposits, and metallogenic belts, and suggest new research. Research on the metallogenesis and tectonics of such major regions as Northeast Asia (eastern Russia, Mongolia, northern China, South Korea, and Japan) and the Circum-North Pacific (the Russian Far East, Alaska, and the Canadian Cordillera) requires a complex methodology including (1) definitions of key terms, (2) compilation of a regional geologic base map that can be interpreted according to modern tectonic concepts and definitions, (3) compilation of a mineral-deposit database that enables a determination of mineral-deposit models and clarification of the relations of deposits to host rocks and tectonic origins, (4) synthesis of a series of mineral-deposit models that characterize the known mineral deposits and inferred undiscovered deposits in the region, (5) compilation of a series of metallogenic-belt belts constructed on the regional geologic base map, and (6) construction of a unified metallogenic and tectonic model. The summary of regional geology and metallogenesis presented here is based on publications of the major international collaborative studies of the metallogenesis and tectonics of Northeast Asia that have been led by the U.S. Geological Survey (USGS). These studies have produced two broad types of publications (1) a series of regional geologic, mineral-deposit, and metallogenic-belt maps, with companion descriptions of the region, and (2) a suite of metallogenic and tectonic analyses of the same region. The study area consists of eastern Russia (most of eastern Siberia and the Russian Far East), Mongolia, northern China, South Korea, Japan, and adjacent offshore areas. The major cooperative agencies are the Russian Academy of Sciences; the Academy of Sciences of the Sakha Republic (Yakutia); VNIIOkeangeologia and Ministry of Natural Resources of the Russian Federation; the Mongolian Academy of Sciences; the Mongolian University of Science and Technology; the Mongolian National University; Jilin University, Changchun, People?s Republic of China, the China Geological Survey; the Korea Institute of Geosciences and Mineral Resources; the Geological Survey of Japan/AIST; the University of Texas, Arlington, and the U.S. Geological Survey (USGS). This study builds on and extends the data and interpretations from a previous project on the Major Mineral Deposits, Metallogenesis, and Tectonics of the Russian Far East, Alaska, and the Canadian Cordillera conducted by the USGS, the Russian Academy of Sciences, the Alaska Division of Geological and Geophysical Surveys, and the Geological Survey of Canada. The major products of this project were summarized by Naumova and others (2006) and are described in appendix A.

Professional Paper↗

Mineral-deposit models for northeast Asia, Chapter 3 in Metallogenesis and tectonics of northeast Asia

The major purposes of this chapter are to provide (1) an overview of the regional geology, tectonics, and metallogenesis of Northeast Asia for readers who are unfamiliar with the region, (2) a general scientific introduction to the succeeding chapters of this volume, and (3) an overview of the methodology of metallogenic and tectonic analysis used in this study. We also describe how a high-quality metallogenic and tectonic analysis, including construction of an associated metallogenic-tectonic model will greatly benefit other mineral resource studies, including synthesis of mineral-deposit models; improve prediction of undiscovered mineral deposit as part of a quantitative mineral-resource-assessment studies; assist land-use and mineral-exploration planning; improve interpretations of the origins of host rocks, mineral deposits, and metallogenic belts, and suggest new research. Research on the metallogenesis and tectonics of such major regions as Northeast Asia (eastern Russia, Mongolia, northern China, South Korea, and Japan) and the Circum-North Pacific (the Russian Far East, Alaska, and the Canadian Cordillera) requires a complex methodology including (1) definitions of key terms, (2) compilation of a regional geologic base map that can be interpreted according to modern tectonic concepts and definitions, (3) compilation of a mineral-deposit database that enables a determination of mineral-deposit models and clarification of the relations of deposits to host rocks and tectonic origins, (4) synthesis of a series of mineral-deposit models that characterize the known mineral deposits and inferred undiscovered deposits in the region, (5) compilation of a series of metallogenic-belt belts constructed on the regional geologic base map, and (6) construction of a unified metallogenic and tectonic model. The summary of regional geology and metallogenesis presented here is based on publications of the major international collaborative studies of the metallogenesis and tectonics of Northeast Asia that have been led by the U.S. Geological Survey (USGS). These studies have produced two broad types of publications (1) a series of regional geologic, mineral-deposit, and metallogenic-belt maps, with companion descriptions of the region, and (2) a suite of metallogenic and tectonic analyses of the same region. The study area consists of eastern Russia (most of eastern Siberia and the Russian Far East), Mongolia, northern China, South Korea, Japan, and adjacent offshore areas. The major cooperative agencies are the Russian Academy of Sciences; the Academy of Sciences of the Sakha Republic (Yakutia); VNIIOkeangeologia and Ministry of Natural Resources of the Russian Federation; the Mongolian Academy of Sciences; the Mongolian University of Science and Technology; the Mongolian National University; Jilin University, Changchun, People?s Republic of China, the China Geological Survey; the Korea Institute of Geosciences and Mineral Resources; the Geological Survey of Japan/AIST; the University of Texas, Arlington, and the U.S. Geological Survey (USGS). This study builds on and extends the data and interpretations from a previous project on the Major Mineral Deposits, Metallogenesis, and Tectonics of the Russian Far East, Alaska, and the Canadian Cordillera conducted by the USGS, the Russian Academy of Sciences, the Alaska Division of Geological and Geophysical Surveys, and the Geological Survey of Canada. The major products of this project were summarized by Naumova and others (2006) and are described in appendix A.

Professional Paper↗

Coulomb 3.3 Graphic-rich deformation and stress-change software for earthquake, tectonic, and volcano research and teaching-user guide

Coulomb is intended both for publication-directed research and for college and graduate school classroom instruction. We believe that one learns best when one can see the most and can explore alternatives quickly. So the principal feature of Coulomb is ease of input, rapid interactive modification, and intuitive visualization of the results. The program has menus and check-items, and dialogue boxes to ease operation. The internal graphics are suitable for publication, and can be easily imported into Illustrator, GMT, Google Earth, or Flash for further enhancements. Coulomb is designed to let one calculate static displacements, strains, and stresses at any depth caused by fault slip, magmatic intrusion, or dike expansion/contraction. One can calculate static displacements (on a surface or at GPS stations), strains, and stresses caused by fault slip, magmatic intrusion, or dike expansion. Problems, such as how an earthquake promotes or inhibits failure on nearby faults, or how fault slip or dike expansion will compress a nearby magma chamber, are germane to Coulomb. Geologic deformation associated with strike-slip faults, normal faults, or fault-bend folds is also a useful application. Calculations are made in an elastic halfspace with uniform isotropic elastic properties following Okada (1992)-see list of key papers in section 1.9. There is substantial evidence to support the hypothesis that faults interact by the transfer of stress, both on the time scales of earthquake sequences and aftershocks and on longer time scales associated with the interevent time of the largest shocks that occur in a given region. There is also evidence that faults and magmatic systems interact as well, and that static stress changes influence intrusions and eruptions. Processes not included in Coulomb are also important, such as dynamic stresses, pore-fluid diffusion, and viscoelastic rebound. Further, elastic stiffness differences between basins and crustal layering modify the stresses in comparison to the elastic halfspace implemented in Coulomb. Nevertheless, we believe that a simple tool that permits exploration of a key component of earthquake interaction has great value for understanding and discovery. To download the software (a MATLAB application) and tutorial files, please go to http://www.coulombstress.org

Open-File Report↗

Emplacement of Holocene silicic lava flows and domes at Newberry, South Sister, and Medicine Lake volcanoes, California and Oregon

This field guide for the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly 2017 focuses on Holocene glassy silicic lava flows and domes on three volcanoes in the Cascade Range in Oregon and California: Newberry, South Sister, and Medicine Lake volcanoes. Although obsidian-rich lava flows have been of interest to geologists, archaeologists, pumice miners, and rock hounds for more than a century, many of their emplacement characteristics had not been scientifically observed until two very recent eruptions in Chile. Even with the new observations, several eruptive processes discussed in this field trip guide can only be inferred from their final products. This makes for lively debates at outcrops, just as there have been in the literature for the past 30 years. Of the three volcanoes discussed in this field guide, one (South Sister) lies along the main axis defined by major peaks of the Cascade Range, whereas the other two lie in extensional tectonic settings east of the axis. These two tectonic environments influence volcano morphology and the magmatic and volcanic processes that form silicic lava flows and domes. The geomorphic and textural features of glass-rich extrusions provide many clues about their emplacement and the magma bodies that fed them. The scope of this field guide does not include a full geologic history or comprehensive explanation of hazards associated with a particular volcano or volcanic field. The geochemistry, petrology, tectonics, and eruption history of Newberry, South Sister, and Medicine Lake volcanic centers have been extensively studied and are discussed on other field excursions. Instead, we seek to explore the structural, textural, and geochemical evolution of well-preserved individual lava flows—the goal is to understand the geologic processes, rather than the development, of a specific volcano.

California, Oregon↗

Evolution of Ore Deposits and Technology Transfer Project: Isotope and Chemical Methods in Support of the U.S. Geological Survey Science Strategy, 2003-2008

Principal functions of the U.S. Geological Survey (USGS) Mineral Resources Program are providing assessments of the location, quantity, and quality of undiscovered mineral deposits, and predicting the environmental impacts of exploration and mine development. The mineral and environmental assessments of domestic deposits are used by planners and decisionmakers to improve the stewardship of public lands and public resources. Assessments of undiscovered mineral deposits on a global scale reveal the potential availability of minerals to the United States and other countries that manufacture goods imported to the United States. These resources are of fundamental relevance to national and international economic and security policy in our globalized world economy. Performing mineral and environmental assessments requires that predictions be made of the likelihood of undiscovered deposits. The predictions are based on geologic and geoenvironmental models that are constructed for the diverse types of mineral deposits from detailed descriptions of actual deposits and detailed understanding of the processes that formed them. Over the past three decades the understanding of ore-forming processes has benefited greatly from the integration of laboratory-based geochemical tools with field observations and other data sources. Under the aegis of the Evolution of Ore Deposits and Technology Transfer Project (referred to hereinafter as the Project), a 5-year effort that terminated in 2008, the Mineral Resources Program provided state-of-the-art analytical capabilities to support applications of several related geochemical tools to ore-deposit-related studies. The analytical capabilities and scientific approaches developed within the Project have wide applicability within Earth-system science. For this reason the Project Laboratories represent a valuable catalyst for interdisciplinary collaborations of the type that should be formed in the coming years for the United States to meet its natural-resources and natural-science needs. This circular presents an overview of the Project. Descriptions of the Project laboratories are given first including descriptions of the types of chemical or isotopic analyses that are made and the utility of the measurements. This is followed by summaries of select measurements that were carried out by the Project scientists. The studies are grouped by science direction. Virtually all of them were collaborations with USGS colleagues or with scientists from other governmental agencies, academia, or the private sector.

Circular↗

World heritage site - Bien du Patrimoine Mondial - Kluane/Wrangell-St. Elias/Glacier Bay/Tatshenshini-Alsek

The four parks depicted on this map make up a single World Heritage Site that covers 24.3 million acres. Together, they comprise the largest internationally protected land-based ecosystem on the planet. The United Nations Educational, Scientific and Cultural Organization (UNESCO) established the World Heritage Program in 1972 for the identification and protection of the world?s irreplaceable natural and cultural resources. World Heritage Sites are important as storehouses of memory and evolution, as anchors for sustainable tourism and community, and as laboratories for the study and understanding of the earth and culture. This World Heritage Site protects the prominent mountain ranges of Kluane, Wrangell, Saint Elias, and Chugach. It includes many of the tallest peaks on the continent, the world's largest non-polar icefield, extensive glaciers, vital watersheds, and expanses of dramatic wilderness. [Les quatre parcs figurant sur cette carte ne constituent qu?un seul site du patrimoine mondial recouvrant plus de 99 millions de km2, ce qui en fait le plus grand ecosysteme terrestre protege par loi internationale. En 1972, L?UNESCO (l?organisation des Nations Unies pour les sciences, l'education et la culture) a etabli le programme du patrimoine mondial afin d?identifier et de proteger les ressources naturelles et culturelles irremplacables de notre plan?te. Si les sites du patrimoine mondial sont si importants c'est parce qu'ils representent a la fois des livres ouverts sur l?histoire de la Terre, le point de depart du tourisme durable et du developpement des collectivites, des laboratoires pour etudier et comprendre la nature et la culture. Ce site du patrimoine mondial assure la protection des chaines de montagnes de Kluane, Wrangell, Saint Elias, et Chugach. On y trouve plusieurs des plus hauts sommets du continent, le plus grand champ de glace non-polaire du monde, d?immenses glaciers, des bassins hydrologiques essentiels, et de la nature sauvage a perte de vue. ]

Scientific Investigations Map↗

Hydrogeologic factors that affect the flowpath of water in selected zones of the Edwards Aquifer, San Antonio region, Texas

The Edwards aquifer in the San Antonio region supplies drinking water for more than 1 million people. Proper development and protection of the aquifer is a high priority for local and State authorities. To better understand the flow of water in two major flowpaths in the Edwards aquifer, stratigraphic, structural, hydrologic, and geochemical data were analyzed. The western Medina flowpath is in parts of Uvalde, Medina, and Bexar Counties, and the eastern flowpath is in northern Bexar and central Comal Counties. A major hydrogeologic factor that affects the pattern of flow in the Edwards aquifer is the spatial and temporal distribution of recharge. Other hydrogeologic factors that affect flowpaths include internal boundaries and the location and rate of spring discharge. The relative displacement of faults and the high permeability layers have substantial control on the discharge at springs and on the flowpaths in the Edwards aquifer. Analysis of the estimated recharge to the Edwards aquifer during 1982 89 indicated that during years of substantial precipitation, a large part of the net recharge probably is diffuse infiltration of precipitation over large parts of the recharge area. During years with below-normal precipitation, most recharge is leakage from rivers and streams that drain the catchment subbasins. In the western Medina flowpath, concentrations of major ions indicate saturation of calcite and undersaturation of dolomite the two minerals that constitute most of the Edwards aquifer matrix. Concentrations of dissolved calcium, alkalinity, and dissolved chloride in the eastern flowpath are greater than those in the western Medina flowpath. These upward trends in concentrations might result in part from: (1) increased development in the recharge area, (2) mineralized effluent from developed areas, or (3) increased dissolution of aquifer material. Tritium data from wells sampled in and near the western Medina flowpath indicate no vertical stratification of flow. Tritium concentrations in the recharge area of the western Medina flowpath are smaller than would be expected from previous studies and for the amount of recharge the area presumably received since 1952. Stable-isotopic data indicate that the water in the Edwards aquifer is meteoric and, except in one known area, has not been subjected to substantial evaporation or other isotope-fractionating processes. Evaporation of water from Medina Lake results in a heavier stable-isotopic ratio in lake water, which subsequently recharges the Edwards aquifer. The stable-isotopic data indicate that lake water does not enter either of the two flowpaths.

Texas↗