SEARCH · USGS Science

Results for “Earth Surface Processes and Landforms”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,665 records · Page 85Linked to original sources

USGS2026

Conventional hydrothermal power-producing systems of the Great Basin, USA

As part of the update to the electric-grade conventional hydrothermal assessment of the Great Basin, USA, Monte Carlo analyses of identified resources within explored regions will be performed to make estimates of discovered resources and associated uncertainty. Analyses use conditional statistics where estimates are conditioned upon a hydrothermal favorability map, allowing for the likelihood that more resources exist in regions of higher hydrothermal favorability. For these analyses, a dataset of identified hydrothermal systems is compiled, and the new compilation is described herein. Recognizing that a single hydrothermal system may be developed with multiple power plants, and that the hydrothermal upflow zone may be several kilometers across with many measurements characterizing a single hydrothermal system, a procedure was developed and employed to create clusters of points (power plants, measurements, etc.) that are associated with a single system, and a new central point was defined as the best estimator of the center of the hydrothermal system. Hydrothermal systems were uniquely identified by grouping electric-grade hydrothermal measurements and operating power plants within a distance of 10 km. Groups that are >10 km apart are assumed to be different electric-grade hydrothermal systems. While 10 km was used as the threshold, most systems were significantly further apart, and most points within groups were typically within 5 km of each other. A well measurement was considered an electric-grade measurement of a hydrothermal system if it had two properties: a measured temperature of >85 °C and evidence of hydrothermal convection. Other points that were added to the dataset are locations of operating powerplants or locations that have been classified as an electric-grade hydrothermal resource by either the U.S Geological Survey (USGS) or the Great Basin Center for Geothermal Energy. After all points are assigned to systems, new points were computed with the goal of identifying the center of the throat of the hydrothermal upflow zone. If operating powerplants exist for a system, then the arithmetic average of all power plant locations is used. Otherwise, if USGS made an estimate, that location is used. In the absence of both powerplants or USGS estimates, the arithmetic average of all electric-grade measurement locations is used. An example is shown of how these newly compiled locations might be ranked for uncertainty analyses, where higher confidence is assumed if measured temperature is higher and there are many supporting measurements indicating an electric-grade resource. In summary, 28 systems have operating power plants, an additional 78 systems are known identified electric-grade hydrothermal resources, and 99 new systems were identified as probable electric-grade systems with varying levels of confidence. These 205 locations are shown as a function of a recent hydrothermal favorability map, conceptually illustrating the conditional statistics that can be used to make estimates of the undiscovered resources of the Great Basin. An accompanying data release provides summaries of developed capacity by system and USGS estimates of likely total capacity and associated uncertainty.

Arizona, California, Idaho, Nevada, Oregon, Utah↗

USGS2024

Trimming the UCERF3-TD logic tree: Model order reduction for an earthquake rupture forecast considering loss exceedance

The Uniform California Earthquake Rupture Forecast version 3-Time Dependent depicts California’s seismic faults and their activity. Its logic tree has 5760 leaves. Considering 30 more model combinations related to ground motion produces 172,800 distinct models representing so-called epistemic uncertainties. To calculate risk to a portfolio of buildings, one also considers millions of earthquakes and spatially correlated ground-motion variability. We offer a tree-trimming technique that retains the probability distribution of portfolio loss and identifies the leading sources of uncertainty for further study. We applied it to a California statewide building portfolio and various levels of nonexceedance probability between one in 100 and one in 2500. We trimmed the logic tree from 172,800 leaves to as few as 15. The result: a supercomputer that would otherwise run 24 h to estimate the distribution of one-in-250-year loss can calculate it in moments with the reduced-order model. Others can use the reduced-order model to calculate risk to different California portfolios, and scientists can prioritize study to reduce the remaining epistemic uncertainty.

Earthquake Spectra↗

USGS2026

Low-frequency earthquakes track the motion of a captured slab fragment

Accurate tectonic models are essential for assessing seismic hazard and fault interactions. However, the plate configuration at the complex Mendocino triple junction, where the San Andreas Fault and the Cascadia subduction zone meet, remains uncertain. We analyzed fault slip associated with a recently identified zone of tectonic tremor and low-frequency earthquakes (LFEs) near the southern edge of the subducting Gorda slab. Based on tidal sensitivity and P-wave first motions, we show that the LFEs are generated by dipping, strike-slip motion. This suggests that a former Farallon slab fragment, now captured by the Pacific plate, is translating northward beneath westernmost North America. This geometry effectively extends the slab interface fault, challenging prevailing interpretations of slab window formation and creating a potential unaccounted earthquake hazard in this region.

Science↗

USGS2025

Statewide cumulative human health risk assessment of inorganics-contaminated groundwater wells, Montana, USA

Across the United States, rural residents rely on unregulated and generally unmonitored private wells for drinking water, which may pose serious health risks due to unrecognized contaminants. We assessed the nature, degree, and spatial distribution of cumulative health risks from inorganic contaminants in groundwater. Our analysis included nearly 84,000 data points from 6500+ wells, across 51 of Montana's 98 watersheds, using a public groundwater database. We compared a drinking water screening level cumulative risk assessment (CRA) for inorganics based on the U.S. Environmental Protection Agency (EPA) protective health thresholds (Maximum Contaminant Level Goals, Health Advisories [MCLG-HAs]) to a CRA based on EPA public supply enforceable Maximum Contaminant Levels (MCLs). Based on median concentrations of 19 inorganics (antimony, arsenic, barium, beryllium, boron, cadmium, chromium, copper, fluoride, manganese, molybdenum, nickel, nitrate, lead, selenium, strontium, thallium, uranium, zinc), 75% of watersheds had MCLG-HA-based cumulative risk values > 1.0; arsenic and uranium contributed the most risk, followed by strontium, fluoride, manganese and boron. Hence, this screening level (Tier I) CRA indicated widespread potential for unrecognized human health risk to private well users from inorganic contaminants considering both carcinogenic and non-carcinogenic risks. Sensitivity analysis showed that benchmarks applied (MCLG-HAs versus MCLs) exerted the largest control on results. Our findings identify priority regions for Tier 2 risk assessments to elucidate local sources and distributions of geogenic versus anthropomorphic contaminants. Our study is the first statewide assessment of cumulative health risk from groundwater that we are aware of, and results support increased statewide drinking water education and testing to reduce human health risks from contaminated private well water.

Montana↗

USGS2026

Rupture into slow-slip fault regime during the 2018 Mw 6.9 Island of Hawaiʻi earthquake is followed by modest postseismic slip

On 4 May 2018, a M w 6.9 earthquake occurred on the south flank of Kīlauea, in the midst of an historic event that included a voluminous eruption from Kīlauea’s lower East Rift zone and caldera collapse at its summit. The earthquake was a consequence of both short‐ and long‐term stress buildup due to magmatic activity associated with the eruption and steady flank motion, respectively, and it revealed features of Kīlauea’s décollement fault that can inform understanding of future earthquake activity. We used geodetic data to determine the distributions of slip during the coseismic and postseismic periods and compared these with areas of known fault slip during past earthquakes and slow‐slip events (SSEs). The 2018 earthquake ruptured into an area of the décollement fault that was active during quasi‐regular SSEs that occurred in the two decades prior to 2018 but that have not been observed since. The coseismic slip model indicates that the amount of motion on the décollement fault was several times greater than what typically occurred during SSEs, suggesting that it may take decades for the fault to rebuild stress to the point at which SSEs will occur again. Postseismic afterslip also occurred in an area of the fault known to experience slow slip; however, unlike at other creeping faults, postseismic afterslip was rapid, being largely over within 2–3 days. The rapid nature and small magnitude of the postseismic afterslip may be due to the lack of a viscoelastic relaxation component, which is possibly a result of the shallow dip of the décollement fault not transferring stress efficiently into the lower crust.

Hawaii↗

USGS2026

Repeated coral bleaching events have eroded reef accretion potential in the Florida Keys

Coral bleaching is now the primary driver of coral-reef degradation globally, threatening the persistence of coral-reef functions and the invaluable ecosystem services they support. The Florida Keys have been impacted by four severe, regional-scale coral-bleaching events, which occurred in 1997–1998, 2005, 2014–2015, and 2023. Our aim in this study was to quantify the effects of those thermal-stress events on the persistence of coral-reef structures. We leveraged long-term coral-reef monitoring data to quantify the impacts of coral bleaching on coral cover, carbonate production, and reef-accretion potential throughout the Florida Keys from 1996–2024. Our study indicates that coral bleaching drove significant declines of reef-building corals, which successively diminished regional-scale reef-accretion potential (from 1.65 ± 0.33 mm y -1 in 1996) and culminated with a regional-scale transition to net reef erosion (-0.12 ± 0.08 mm y -1 ) following the 2023 event. Coral bleaching was the primary driver of declining reef-building capacity, with the cumulative impacts of the four coral-bleaching events accounting for >75% of total declines since 1996. The 1997–1998 event alone drove ~50% of overall declines, largely due to losses of the shallow-water ecosystem engineer, Acropora palmata . More moderate impacts of thermal stress on regional reef-accretion potential in 2005 (6%) and 2014–2015 (9%) could lend some support to the hypothesis that the remaining corals were more thermally tolerant; however, the unprecedented thermal stress event in 2023 caused widespread coral-bleaching and bleaching-related mortality, and caused an additional 12% of the total decline in reef-accretion potential. Stony-coral tissue loss disease accounted for an additional 6% of the decline, with the remaining 19% unexplained. Coral bleaching has already dramatically reshaped the structure and function of coral reefs in the Florida Keys over the last three decades. With the high likelihood that thermal stress will accelerate moving forward, the persistence of Florida’s essential coral-reef functions and services is uncertain.

Florida↗

USGS2025

Igneous differentiation in arcs

This chapter assesses crystallization-differentiation of convergent-margin magmas both from the standpoints of natural rock suites and from laboratory phase-equilibrium experiments. Crystallization-differentiation of dry subalkaline and alkaline basalts are summarized at the beginning for reference and context. Experiments crystallizing arc basalts through andesites at middle to upper crustal pressures (100–400 MPa), saturated either with H 2 O or mixed H 2 O-CO 2 , produce liquid lines of descent similar to arc igneous suites, with higher f O 2 s giving results closer to calc-alkaline magma series. Early enrichment of melts in SiO 2 with little or no enrichment in FeO* (total Fe as FeO) comes about by the combined effects of H 2 O suppressing crystallization of plagioclase relative to olivine, shifting plagioclase to more calcic – therefore lower SiO 2 – compositions, and suppressing silicate minerals to greater extents than Fe-rich spinel. Also contributing to SiO 2 enrichment is crystallization near the liquidus of higher proportions of olivine relative to calcic clinopyroxene, compared with MORB, but it is unclear if this is brought about by H 2 O or elevated pressure. Exhumed arc terranes, however, generally fail to expose evidence for primitive liquids having reached and differentiated at middle to upper crustal depths, at least in any abundance. Instead, most differentiation in arcs appears to take place in the lower crust or near the crust-mantle transition, and although hydrous experiments at such pressures produce liquids broadly similar to arc suites in their SiO 2 enrichment, the experimental liquids differ in becoming peraluminous at early stages of differentiation while melts have basaltic, basaltic andesitic, or andesitic SiO 2 concentrations. Crystallization of abundant calcic clinopyroxene close to the liquidus causes the high-pressure experimental liquids to become peraluminous with only small increases in SiO 2 concentration. In contrast, natural arc volcanic and plutonic suites become gradually less metaluminous with increasing SiO 2 , crossing to peraluminous at dacitic to rhyolitic SiO 2 concentrations. Hybridism, encompassing magma-mixing, assimilation of old crust, and incorporation of near-solidus melts from only shortly older deep, antecedent arc intrusions may accompany natural crystallization-differentiation, preventing melts from attaining peraluminous compositions at low-SiO 2 concentrations. If so, then nearly all arc suites are to substantial extents composites, rather than preserving simple, progressive liquid lines of descent. Some comments and assessments are also made on the participation of garnet in arc differentiation and on the production of arc batholiths.

Book chapter↗

USGS2026

New measurements indicate that natural geologic methane emissions from microseepage in the Michigan Basin are likely negligible

The magnitude of natural geologic methane (CH 4 ) emissions to the atmosphere (including emissions of fossil CH 4 from offshore and onshore gas and oil seeps, diffuse microseepage, mud volcanoes, volcanic vents, and geothermal areas) is highly uncertain. The largest component of geologic emissions is thought to be microseepage, which is the diffuse flux of CH 4 from soils across large areas of productive hydrocarbon basins. The accuracy of existing bottom-up estimates of microseepage is limited by low spatial coverage of published microseepage measurements. We present the first soil—atmosphere CH 4 flux measurements from Michigan Basin, USA. Results from 335 measurements taken during summer and winter seasons across a large portion of the basin suggest microseepage is nonexistent in the sampled region. Even areas with predictive features for microseepage (e.g., underlying mature, organically rich source rocks, proven gas accumulations, faults, and lineaments) yield null or negative fluxes, suggesting that CH 4 emissions from microseepage are negligible throughout our study region. A Monte Carlo method was used to place an upper limit on the regional-mean microseepage flux, in which synthetic patchy microseepage distributions were generated and tested against our observations to assess the impact of possible emission hot spots that were missed by our sampling strategy. Our analysis finds it is very unlikely that regional-mean emissions are as high as assumed in a previous global microseepage study. The observed lack of seepage may be explained by groundwater flow, active methanotrophy, glacial sediments, and bedded salt deposits, which could inhibit vertical gas migration and release to atmosphere.

Michigan↗

USGS2024

Estimating domestic self-supplied water use in Rhode Island, 2014–21

Water withdrawal from private groundwater wells is often unaccounted for in water planning studies, and water from private wells can be a source of exposure to environmental contaminants. The sizes of populations that depend on private wells for domestic water use and the amounts of water that are withdrawn from these wells are generally poorly represented in data collection efforts because of the challenges of locating, metering, or gathering withdrawal information from individual property owners. To address this problem, the U.S. Geological Survey, in cooperation with the Rhode Island Water Resources Board, estimated the volume of water withdrawn from domestic self-supply wells and the populations who use them for the State of Rhode Island at a 30-meter pixel spatial resolution and one-month temporal resolution between July 2014 and June 2021. The number of people reliant on domestic self-supply wells has increased in Rhode Island over the study period; however, the statewide estimate of total water withdrawal has not statistically increased. Withdrawals from private wells are largest in the inland areas of the western part of the State, and the towns of Scituate and Charlestown have the highest estimated withdrawals. Statewide monthly withdrawals ranged from 3.987 million gallons per day in March 2018 to 7.767 million gallons per day in September 2016. The median per capita domestic water use rate was 46.0 gallons per capita per day.

Rhode Island↗

USGS2026

Cruise summary—Samoa Basin abyssal mapping—Box coring leg, Pago Pago, Territory of American Samoa to Pago Pago, American Samoa, April 11– May 1, 2026

Expedition Summary U.S. Geological Survey scientists led a box coring effort to the Samoa Basin to characterize minerals and the surrounding abyssal sediments and fauna. Thirty-eight box cores were deployed between April 13, 2026, and April 28, 2026. Thirty-six box cores recovered sufficient material to determine nodule density, and 35 recovered sufficient material for subcores to be collected. The purpose of this Data Report is to provide a summary of samples collected, initial results that were obtained shipboard, and briefly mention planned future analyses from this expedition.

Data Report↗

USGS2024

Lithium resource in the Smackover Formation brines of Southern Arkansas

Lithium-rich brine deposits occur throughout the United States, including in the Smackover Formation. The concentration of lithium in Smackover Formation brines was predicted across southern Arkansas by using a machine-learning model that incorporated lithium concentration data and geologic information. Between 5.1 and 19.0 million metric tons of lithium are calculated to be present in the brines of the Smackover Formation in southern Arkansas. The range in possible total lithium reflects the uncertainty in machine-learning predictions of lithium concentrations and the range of Smackover Formation porosity. This estimate quantifies the in-place lithium resource and does not consider the technological and economic feasibility of extracting the lithium from the brines.

Arkansas↗

USGS2025

Long‐period ground motions from dynamic rupture simulations of large earthquakes on the creeping Hayward–Calaveras–Rodgers Creek fault system

he Hayward, Calaveras, and Rodgers Creek faults in the San Francisco Bay region of California have a high probability of producing a large earthquake in the next decades. Although these faults creep, the creep is insufficient to keep up with their relatively rapid slip rates on their deepest sections, so they have been storing tectonic strain since their last large earthquakes, with the Hayward’s and Rodgers Creek’s more than 150 yr ago. We do not know what the next large Hayward–Calaveras–Rodgers Creek earthquakes will look like or how strongly they will shake the San Francisco Bay region. Harris et al. (2021) used the 3D dynamic (spontaneous) rupture method to simulate large earthquakes on these creeping faults. In this article, we examine the resulting simulated long‐period ( T > 1 s) ground shaking from 0 to 50 km distance, for earthquakes nucleating on the Hayward fault and earthquakes nucleating on the Rodgers Creek fault. We compare these simulated long‐period ground motions with the Boore et al. (2014) well‐established empirically based ground‐motion model suitable for the slowest material velocity in our 3D velocity structure. We find that the simulated long‐period ground motions from the creeping‐fault earthquake scenarios produce a reasonable agreement with the empirical expectations if frictional cohesion is included only where it is appropriate.

California↗

USGS1976

Non-radiometric borehole geophysical detection of geochemical halos surrounding sedimentary uranium deposits

Roll-type uranium deposits are formed by the concentration of uranium by ground water in geochemical cells. Non-uranium minerals having different solubilities may be deposited ahead of or behind the uranium minerals, forming halos that surround the ore. In addition, oxidizing and reducing environmental conditions may cause zones of mineral alteration to develop beyond the limits of the uranium deposit. Certain physical property anomalies that are commonly associated with halos can be detected by relatively fast and inexpensive borehole geophysical measurements made either in individual holes, or between two adjacent holes. Borehole measurements that have been found to be useful include electrical resistivity, induced polarization, and magnetic susceptibility. Electrical resistivity is increased by the presence of calcite and other cementing minerals that sometimes create permeability barriers in the neighborhood of uranium deposits. Induced polarization (IP) response is increased by sulfide and clay minerals that are commonly found in anomalous concentrations near roll-type deposits. Magnetic susceptibility is usually decreased by the oxidation of magnetite to hematite or limonite in the zone of chemical alteration that is left as a trail behind roll fronts. Borehole measurements of electrical resistivity, induced polarization and magnetic susceptibility were made in the vicinity of a uranium roll-type deposit in south Texas. Results indicate that mineral halos can be detected by borehole measurements made. in wide-spaced drill holes, and that the total amount of drilling needed to find a deposit can be reduced substantially by this exploration approach.

Open-File Report↗

USGS2025

Site-specific, extended ShakeMaps for earthquake engineering applications

The U.S. Geological Survey (USGS) routinely produces ShakeMaps of shaking intensity across the globe. Due to practical constraints, the number of response spectral periods was limited to three standard periods (0.3, 1.0, and 3.0 sec). We have recently developed the tools that are necessary to expand this functionality to include 22 periods (matching the current U.S. National Seismic Hazard Model periods) as well as the orientation-independent components (e.g., “RotD50”). We refer to ShakeMap products that include these extensions as “extended ShakeMaps.” The added level of complexity motivated us to also develop a user-friendly tool called the “ShakeMap Sampling Tool” (SST) that gives all the estimated shaking metrics for a specific location (or list of locations). Additionally, we develop a web application where users can input locations of interest and view/download the SST results. We further familiarize users with the concept of “Composite ShakeMaps.” For earthquakes sequences such as a mainshock and larger foreshocks and aftershocks, this provides a map of the maximum value of each shaking metric, which is useful for overall loss estimates, the full extent of ground failure triggering potential, and a better portrayal of the repeated shaking levels at a given point for a series of earthquakes. Such a site-specific shaking history facilitates earthquake forensics at building or infrastructure sites for which damage may be of concern, as described in the Disproportionate Damage Earthquake trigger specified in the IEBC (2018, Section 405.2.2) and in developing ATC-145 guidelines (Guidelines for Post-Earthquake Assessment, Repair, and Retrofit of Buildings). The composite ShakeMap can be combined with the SST for a variety of earthquake-hazard applications, such as systematically inferring triggering shaking estimates at specific sites of geotechnical interest for landsliding, liquefaction, and lateral-spreading hazards.

Kahramanmaraş↗

USGS2024

Current status of the community sensor model standard for the generation of planetary digital terrain models

The creation of accurate elevation models (topography) from stereo images are critical for a large variety of geospatial activities, including the production of digital orthomosaics, change detection, landing site analysis, geologic mapping, rover traverse planning, and spectral analysis. The United Stated Geological Survey, Astrogeology Science Center, continues to transition the supported planetary sensor models to the Community Sensor Model (CSM) standard. This paper describes the current state of use for this photogrammetric standard, supported sensor model types, and qualitatively compares derived topography between SOCET SET and SOCET GXP ( ® BAE Systems) using HiRISE stereo images of Mars. Our transition to the CSM standard will ensure an uninterrupted capability to make these valuable products for Mars and many other extraterrestrial planets and moons.

Remote Sensing↗

USGS2025

Climate-driven sulfate export in alpine watersheds may stimulate methylmercury production

Climate change is increasing sulfate export and changing wetland extent in mountain regions. These changes may increase microbially mediated production of the neurotoxic substance methylmercury due to enhanced sulfate metabolism in mountain environments. Here, we assess methylmercury concentrations and formation rates across high-elevation wetlands in the Colorado Rocky Mountains. We also investigate sulfate controls on methylmercury production within subalpine peatlands by amending soils with sulfate to mimic increased stream export of sulfate from the alpine zone and measuring methylmercury formation rates for different sulfate treatments. We found that subalpine peatlands have statistically significant higher methylmercury concentrations and formation rates compared to alpine, mineral-soil wetlands. Methylmercury production in subalpine peatlands also increased significantly ( p < 0.05) following sulfate additions; the highest rates occurred in sediments with intermediate extractable sulfate concentrations (∼0.60–1.4 mg sulfate g −1 dry soil). Our study is the first to identify soil sulfate-related thresholds for methylmercury production and sulfate-limitation of methylmercury production in subalpine peatlands. These findings highlight important linkages between climate-driven mineral weathering and mercury cycling in mountain regions globally.

Colorado↗

USGS2024

The SCEC/USGS community stress drop validation study using the 2019 Ridgecrest earthquake sequence

We introduce a community stress drop validation study using the 2019 Ridgecrest, California, earthquake sequence, in which researchers are invited to use a common dataset to independently estimate comparable measurements using a variety of methods. Stress drop is the change in average shear stress on a fault during earthquake rupture, and as such is a key parameter in many ground motion, rupture simulation, and source physics problems in earthquake science. Spectral stress drop is commonly estimated by fitting the shape of the radiated energy spectrum, yet estimates for an individual earthquake made by different studies can vary hugely. In this community study, sponsored jointly by the U. S. Geological Survey and Southern/Statewide California Earthquake Center, we seek to understand the sources of variability and uncertainty in earthquake stress drop through quantitative comparison of submitted stress drops. The publicly available dataset consists of nearly 13,000 earthquakes of M1 to 7 from two weeks of the 2019 Ridgecrest sequence recorded on stations within 1-degree. As a community study, findings are shared through workshops and meetings and all are invited to join at any time, at any interest level.

Seismica↗

USGS2024

Cross-fade sampling: Extremely efficient Bayesian inversion for a variety of geophysical problems

This paper introduces cross-fade sampling, a computationally efficient Markov Chain Monte Carlo simulation method that uses a semi-analytical approach to quickly solve Bayesian inverse problems that do not themselves have an analytical solution. Cross-fading is efficient in two ways. First, it requires fewer samples to obtain the same quality simulation of the target probability density function (PDF). Secondly, it is much faster to evaluate the posterior probability of each sample than conventional sampling methods for simulating Bayesian posterior PDFs. Conventional methods require evaluating the prior probability (which describes your a priori constraints) and data likelihood (which describes the fit between the observations and the predictions of the model) for each sample model. However, cross-fading does not require evaluating the data likelihood, meaning that ‘big data’ can be fit with zero additional computational cost. Further, the cross-fading approach can be used to calculate the marginal likelihood associated with a model design, facilitating model comparison and Bayesian model averaging. Topics covered in this paper include derivation of the cross-fade approach and how it can be used to simulate Bayesian posterior PDFs and compute the marginal likelihood, discussion of the class of problems to which cross-fading can be applied (with examples from earthquake statistics, earthquake ground motion modelling, volcanic eruption forecasting, and finite fault slip modelling), demonstration of efficiency relative to existing sampling methods and discussion of how cross-fading can be used to account for prediction errors (i.e. epistemic errors) as part of the geophysical inverse problem.

Geophysical Journal International↗