USGS Science⌕ Search

SEARCH · USGS Science

Results for “Washington Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84Linked to original sources

The geochemistry of water near a surficial organic-rich uranium deposit, northeastern Washington State, U.S.A.

The chemistry of three stream, three spring and six near-surface waters in the vicinity of a Holocene organic-rich uranium deposit is described, with particular emphasis on the chemistry of U. Results characterize the solution behavior of uranium as U-bearing water interacts with relatively undecomposed, surficial organic matter. Of the measured major and trace chemical species, only U is consistently highly enriched (17-318 ppb) relative to reported values for regional waters, or to literature values for waters in largely granitic terrains. R-mode factor analysis of the chemical data suggests that most U is present in a soluble form, but that some U is also associated with fine suspended particulates of clay, organic matter, or hydrous oxides. Calculations that apply thermodynamic data to predict U speciation in solution indicate the relative importance of uranyl carbonate and uranyl phosphate complexes. Analysis of more finely filtered samples (0.05 ??m vs. 0.45 ??m), and direct radiographic observations using fission-track detectors suspended in the waters indicate the presence of some uraniferous particulate matter. Application of existing thermodynamic data for uranous- and uranyl-bearing minerals indicates that all waters are undersaturated with U minerals as long as ambient Eh ??? +0.1 v. If coexisting surface and near-surface waters are sufficiently oxidizing, initial fixation of U in the deposit should be by a mechanism of adsorption. Alternatively, more reducing conditions may prevail in deeper pore waters of the organic-rich host sediments, perhaps leading to direct precipitation or diagenetic formation of U4+ minerals. A 234U 238U alpha activity ratio of 1.08 ?? 0.02 in a spring issuing from a hillslope above the deposit suggests a relatively soluble source of U. In contrast, higher activity ratios of 234U 238U (??? 1.3) in waters in contact with the uraniferous valley-fill sediments suggest differences in the nature of interaction between groundwater and the local, U-rich source rocks. ?? 1987.

Chemical Geology↗

Instrumentation recommendations for volcano monitoring at U.S. volcanoes under the national volcano early warning system

As magma moves toward the surface, it interacts with anything in its path: hydrothermal systems, cooling magma bodies from previous eruptions, and (or) the surrounding “country rock.” Magma also undergoes significant changes in its physical properties as pressure and temperature conditions change along its path. These interactions and changes lead to a range of geophysical and geochemical phenomena. The goal of volcano monitoring is to detect and correctly interpret such phenomena in order to provide early and accurate warnings of impending eruptions. Given the well-documented hazards posed by volcanoes to both ground-based populations (for example, Blong, 1984; Scott, 1989) and aviation (for example, Neal and others, 1997; Miller and Casadevall, 2000), volcano monitoring is critical for public safety and hazard mitigation. Only with adequate monitoring systems in place can volcano observatories provide accurate and timely forecasts and alerts of possible eruptive activity. At most U.S. volcanoes, observatories traditionally have employed a two-component approach to volcano monitoring: (1) install instrumentation sufficient to detect unrest at volcanic systems likely to erupt in the not-too-distant future; and (2) once unrest is detected, install any instrumentation needed for eruption prediction and monitoring. This reactive approach is problematic, however, for two reasons. 1. At many volcanoes, rapid installation of new ground-1. based instruments is difficult or impossible. Factors that complicate rapid response include (a) eruptions that are preceded by short (hours to days) precursory sequences of geophysical and (or) geochemical activity, as occurred at Mount Redoubt (Alaska) in 1989 (24 hours), Anatahan (Mariana Islands) in 2003 (6 hours), and Mount St. Helens (Washington) in 1980 and 2004 (7 and 8 days, respectively); (b) inclement weather conditions, which may prohibit installation of new equipment for days, weeks, or even months, particularly at midlatitude or high-latitude volcanoes; (c) safety factors during unrest, which can limit where new instrumentation can safely be installed (particularly at near-vent sites that can be critical for precursor detection and eruption forecasting); and (d) the remoteness of many U.S. volcanoes (particularly those in the Aleutians and the Marianas Islands), where access is difficult or impossible most of the year. Given these difficulties, it is reasonable to anticipate that ground-based monitoring of eruptions at U.S. volcanoes will likely be performed primarily with instruments installed before unrest begins. 2. Given a growing awareness of previously undetected 2. phenomena that may occur before an eruption begins, at present the types and (or) density of instruments in use at most U.S. volcanoes is insufficient to provide reliable early warning of volcanic eruptions. As shown by the gap analysis of Ewert and others (2005), a number of U.S. volcanoes lack even rudimentary monitoring. At those volcanic systems with monitoring instrumentation in place, only a few types of phenomena can be tracked in near-real time, principally changes in seismicity, deformation, and large-scale changes in thermal flux (through satellite-based remote sensing). Furthermore, researchers employing technologically advanced instrumentation at volcanoes around the world starting in the 1990s have shown that subtle and previously undetectable phenomena can precede or accompany eruptions. Detection of such phenomena would greatly improve the ability of U.S. volcano observatories to provide accurate early warnings of impending eruptions, and is a critical capability particularly at the very high-threat volcanoes identified by Ewert and others (2005). For these two reasons, change from a reactive to a proactive volcano-monitoring strategy is clearly needed at U.S. volcanoes. Monitoring capabilities need to be expanded at virtually every volcanic center, regardless of its current state of unrest, with particular emphases on real-time data transmission and increasing the diversity, quality, and quantity of instrumentation at U.S. volcano observatories. In this report, we present recommendations for the types and numbers of instruments that should be deployed to monitor U.S. volcanoes. These recommendations are the result of discussions among members of a panel of government- and university-based scientists about the status and future directions of volcano monitoring, with discussions framed by the U.S. Geological Survey (USGS)’s National Volcano Early Warning System (NVEWS) initiative (Ewert and others, 2005).

Scientific Investigations Report↗

Heavy-mineral distribution in modern and ancient bay deposits, Willapa Bay, Washington, U.S.A.

Analysis of heavy-mineral distribution in modern sediments of Willapa Bay, Washington, indicates a dominance of two mineralogic assemblages, one with approximately equivalent amounts of hornblende, orthopyroxene and clinopyroxene, the other dominated by clinopyroxene. The hornblende-orthopyroxene-clinopyroxene suite is derived from the Columbia River, which discharges into the ocean a short distance south of the bay. The clinopyroxene suite is restricted in modern sediments to sands in rivers flowing into the bay from the east. The heavy-mineral distributions suggest that sand discharged from the Columbia River, borne north by longshore transport, and carried into the bay by tidal currents accounts for most of the sand within the interior of Willapa Bay. Three heavy-mineral assemblages are present in the surrounding Pleistocene deposits; two of these are identical to the modern assemblages described above. These heavy-mineral assemblages reflect the relative influence of tidal and fluvial processes on the Late Pleistocene deposits; their relative influences are consistent with those inferred on the basis of sedimentary structures and stratigraphic relations in about two-thirds of the samples examined. The anomalies can be explained by recycling of sand from older deposits. The persistence of the two heavy-mineral assemblages suggests that the pattern of estuarine sedimentation in Late Pleistocene deposits closely resembled that of the modern bay. The third heavy-mineral suite, dominated by epidote, occurs in a few older Pleistocene units. On the north side of the bay, the association of this suite with southwest-directed foresets in crossbedded gravel indicates derivation from the northeast, perhaps from an area of glacial outwash. The presence of this suite in ancient estuarine sands exposed on the east side of the bay suggests that input from this northerly source may have intermittently dominated bay deposition in the past.

Washington↗

Tidal-cycle changes in oscillation ripples on the inner part of an estuarine sand flat

Oscillation ripples form on subaqueous sand beds when wave-generated, near-bottom water motions are strong enough to move sand grains. The threshold of grain motion is the lower bound of the regime of oscillation ripples and the onset of sheet flow is the upper bound. Based on the relation between ripple spacing and orbital diameter, three types of symmetrical ripples occur within the ripple regime. In the lower part of the ripple regime (orbital ripples), spacing is proportional to orbital diameter; in the upper part (anorbital ripples) spacing is independent of orbital diameter. Between these regions occurs a transitional region (suborbital ripples). Oscillation ripples develop on a sandy tidal flat in Willapa Bay, Washington, as a result of waves traversing the area when it is submerged. Because wave energy is usually low within the bay, the ripples are primarily orbital in type. This means that their spacing should respond in a systematic way to changes in wave conditions. During the high-water parts of some tidal cycles, ripples near the beach decrease in spacing during the latter stage of the ebb tide while ripples farther offshore do not change. Observations made over several tidal cycles show that the zone of active ripples shifts on- or offshore in response to different wave conditions. Detailed bed profiles and current measurements taken during the high-water part of spring tides show the manner in which the oscillation ripples change with changes in orbital diameter. Changes in ripple spacing at the study site could be correlated with changes in orbital diameter in the manner suggested by the criterion for orbital ripples. However, there appeared to be a lag time between a decrease in orbital diameter and the corresponding decrease in ripple spacing. Absence of change during a tidal cycle could be attributed to orbital velocities below the threshold for grain motion that negated the effects of changes in orbital diameter. Because changes in sand-flat ripples depend both upon changes in orbital diameter and upon the magnitude of the orbital velocity, exposed ripples were not necessarily produced during the preceding high tide. In fact, some ripples may have been just produced, while others, farther offshore, may have been produced an unknown number of tides earlier. Therefore, when interpreting past wave conditions over tidal flats from low-tide ripples, one must remember that wave periods have to be short enough to produce velocities greater than the threshold velocity for the orbital diameters calculated from the observed ripple spacings.

Washington↗

Application of a hydrometeorological model to the south-central Sierra Nevada of California

A hydrometeorological streamflow-prediction model (HM model) developed for the North Cascades of Washington has been tested in the south-central Sierra Nevada of California. Twenty-four drainages ranging in mean altitude from 770 to 3,160 metres, including several of the major ones such as those of the Kern, Kings, and Merced Rivers, were examined. Eight U.S. National Oceanic and Atmospheric Administration precipitation stations were evaluated. Of these, three proved to be of significant value for nearly all the drainages used. Results are given for predictions on February 1, March 1, and April 1 of monthly runoff of five major drainages for the April-September season. Also demonstrated is the April 1 prediction of a daily hydrograph for the April-September season for 2 diverse years. The altitude distribution of storage and runoff, both observed and predicted, is determined by using several drainages with different area-altitude profiles. Results of this calculation for two drainages show that, on the average, approximately 50 percent of the April-July runoff originates above 2,800 m. The influence of subsequent precipitation on prediction accuracy is determined by relating prediction error and actual precipitation occurring after the prediction day. Results for three basins show that about 75 percent of the error of a January-September prediction on January 1 is due to precipitation occurring during the prediction season. Comparisons of prediction accuracy are made for five major drainages: the Kern River near Kernville; the Kings River below North Fork, near Trimmer (inflow to Pine Flat Dam); the Kings River at Piedra; the Merced River at Pohono Bridge, near Yosemite; and the Merced River below Merced Falls Dam, near Snelling. The accuracy of the HM model appears to be about 24 percent higher than existing operational methods in predicting the April-July runoff on April 1.

California↗

Structure, age, and tectonic setting of a multiply reactivated shear zone in the piedmont in Washington, D.C., and vicinity

The Rock Creek shear zone is the dominant tectonic feature in the Piedmont in Washington, D.C. and adjacent parts of Maryland, has an exposed length of 25 km, and a width of up to 3 km. The shear zone is characterized by a complicated composite fabric produced by the imposition of both ductile and brittle structures as well as the reactivation, transposition, and folding of older structures during subsequent antithetic displacement. At least five main types of structural elements are discernible and include: 1) relict, medium- to coarse-grained mylonitic foliation and related structures produced by sinistral shearing under at least middle amphibolite facies conditions; 2) a ductile fault zone having an apparent sinistral displacement of at least several km and an unknown, but possibly significant component of upward throw of the east wall; 3) pervasive, fine-grained ultramylonitic foliation associated with quartz ribbons and late oblique shear bands, generated by dextral shearing under thermal conditions that appear to have progressed from middle greenschist to sub-greenschist (semi-brittle); 4) a system of oblique-(west wall up) and dextralship faults localized chiefly within a tectonic me??lange at the junction of two major strands, and whose motion spanned the ductile-brittle transition; and 5) a system of post-Cretaceous thrust faults that cut Coastal Plain rocks as young as Quaternary as well as the previously deformed crystalline rocks. The first two sets of structures are of probable Ordovician age and are thus believed to coincide with the Taconic event, which produced regional middle to upper amphibolite facies metamorphism, widespread plutonism, and extensive southwest-vergent fold phases in this area. In contrast, the dextral shearing and faulting were generated during final thermal cooling and represent the latest Paleozoic penetrative deformation that affected this area. They are very likely Alleghanian because of their great similarity to other better-dated Alleghanian structural features in the Maryland and Virginia Piedmont.

Southeastern Geology↗

History of the topographic branch (division)

From a very early period of the world's existence, man has endeavored to represent the earth's surface in a graphic form for the information of his fellow men, realizing that no oral or written description is capable of setting forth topographic facts so vividly and so clearly as a map. Mapping of the areas of the United States began with the charting of portions of its coast line by early explorers; the need for topographic maps was first recognized during the war of the Colonies for independence from Great Britain. On July 22, 1777, Congress authorized General Washington to appoint: 'Mr. Robert Erskine, or any other person that he may think proper, geographer and surveyor of the roads, to take sketches of the country and the seat of war.' By several acts during the Revolutionary War, Congress provided 'geographers' for the armies of the United States, some of them with the pay of a colonel, amounting to $60 a month and allowances. At the end of the War, a resolution of May 27, 1785, continued in service the 'geographer of the United States' for a period of 3 years. The War Department recognized the necessity of 'geographical engineers' and requested Congress to authorize their appointment, but it was not until the next war that Congress authorized on March 3, 1813, the appointment of eight topographic engineers and eight assistant topographic engineers under the direction of the General Staff of the Army. These officers formed the nucleus of the first Corps of Topographic Engineers in the Army, and that Corps continued to function as an independent unit until it was absorbed by the Corps of Engineers in 1863, during the Civil War between the States. Between the Louisiana Purchase in 1803, and the outbreak of the Civil War, more than a hundred exploring and mapping expeditions were sent into the vast territory lying west of the Mississippi River to investigate the natural resources of this newly acquired country and to find possible locations for wagon roads to the Pacific Coast. These expeditions were sent out by the War Department and were in charge of Army officers. It is interesting to note that such generals as George G. Meade, J.C. Fremont, Joseph E. Johnston, W.F. Smith, John Pope, A.W. Whipple, J.G. Parke, G.K. Warren, and H.L. Abbott, all officers of the Corps of Topographic Engineers, had charge of expeditions and were among our earliest map makers. Unfortunately, the data obtained by these editions were not of sufficient accuracy to serve as a basis for topographic maps of value other than in illustrating their voluminous reports. During this early period, numerous surveys were undertaken within the original Thirteen States, by the Federal government and by the States. The most important were those carried on by the U.S. Coast and Geodetic Survey, which made an accurate survey of the Atlantic Coastline and established a triangulation system that was of so high a standard as to constitute the first and only accurate data for topographic mapping obtained before the Civil War. The Coast and Geodetic Survey, while charting the coast and rivers, also mapped a strip of country extending a few miles inland, the relief being shown by means of hachures, together with contour lines, until 1846 when the first government topographic map on which the relief was shown by contours alone was made, covering an area in the vicinity of Boston Harbor. In 1835, however, the Geological and Topographical Survey of Maryland had issued a map on which the relief was shown by contours, and this is believed to be the first contoured map issued in this country. The outbreak of the Civil War stopped all mapping activities other than those needed by the U.S. Army. During the war, topographic surveys were carried on throughout the war zone under the supervision of the Corps of Engineers, the topographers being civilian employees. After the war, the country west of the Mississippi again became the center of the mapping activities

Circular↗

The southern Whidbey Island fault: An active structure in the Puget Lowland, Washington

Information from seismic-reflection profiles, outcrops, boreholes, and potential field surveys is used to interpret the structure and history of the southern Whidbey Island fault in the Puget Lowland of western Washington. This northwest-trending fault comprises a broad (as wide as 6–11 km), steep, northeast-dipping zone that includes several splays with inferred strike-slip, reverse, and thrust displacement. Transpressional deformation along the southern Whidbey Island fault is indicated by along-strike variations in structural style and geometry, positive flower structure, local unconformities, out-of-plane displacements, and juxtaposition of correlative sedimentary units with different histories. The southern Whidbey Island fault represents a segment of a boundary between two major crustal blocks. The Cascade block to the northeast is floored by diverse assemblages of pre-Tertiary rocks; the Coast Range block to the southwest is floored by lower Eocene marine basaltic rocks of the Crescent Formation. The fault probably originated during the early Eocene as a dextral strike-slip fault along the eastern side of a continental-margin rift. Bending of the fault and transpressional deformation began during the late middle Eocene and continues to the present. Oblique convergence and clockwise rotation along the continental margin are the inferred driving forces for ongoing deformation. Evidence for Quaternary movement on the southern Whidbey Island fault includes (1) offset and disrupted upper Quaternary strata imaged on seismic-reflection profiles; (2) borehole data that suggests as much as 420 m of structural relief on the Tertiary-Quaternary boundary in the fault zone; (3) several meters of displacement along exposed faults in upper Quaternary sediments; (4) late Quaternary folds with limb dips of as much as ≈9°; (5) large-scale liquefaction features in upper Quaternary sediments within the fault zone; and (6) minor historical seismicity. The southern Whidbey Island fault should be considered capable of generating large earthquakes (M s ≥7) and represents a potential seismic hazard to residents of the Puget Lowland.

Washington↗

Modeled inundation limits of potential lahars from Mount Adams in the White Salmon River Valley, Washington

Lahars large enough to reach populated areas are a hazard at Mount Adams, a massive volcano in the southern Cascade Range of Washington State (fig. 1). It is considered to be still active and has the potential to erupt again. By definition, lahars are gravity-driven flows of water-saturated mixtures of mud and rock (plus or minus ice, wood, and other debris), which originate from volcanoes and have a variety of potential triggering mechanisms (Vallance, 2000; Vallance and Iverson, 2015). Flowing mixtures can range in fluid consistency from something like a milkshake to something more like wet concrete, and they behave like flash floods, in that they can appear suddenly in river channels with little warning and commonly have boulder- or log-choked flow fronts. Lahars are hazardous because they can flow rapidly in confined valleys (commonly 20–35 miles per hour [mph] or 9–16 meters per second [m/s]), can travel more than 100 miles (mi) (161 kilometers [km]) from a source volcano, and can move with incredible destructive force, carrying multi-ton boulders and logs that can act as battering rams (Pierson, 1998). The biggest threats from lahars to downstream communities are present during eruptive activity, and impacts to communities can be dire. For example, a very large eruption-triggered lahar in Colombia in 1985 surprised and killed more than 20,000 people in a large town located about 45 mi (72 km) downstream and out of sight of the volcano that produced it (Pierson and others, 1990). Mount Adams, one of the largest volcanoes in the Cascade Range, is a composite stratocone composed primarily of andesite lava flows. It has been the most continuously active volcano within the 480-mi 2 Mount Adams volcanic field—a region covering parts of Klickitat, Skamania, Yakima, andLewis Counties and part of the Yakama Nation Reservation in Washington State (Hildreth and Fierstein,1995, 1997). About 500,000 years in age, Mount Adams reached its present size by about 15,000 years ago, primarily through the episodic effusion of lava flows; it has not had a history of major explosive eruptions like Mount St. Helens, its neighbor to the west. Timing of the most recent eruptive activity (recorded by four thin tephra layers) is on the order of 1,000 years ago; the tephras are bracketed by 2,500-year-old and 500-year-old ash layers from Mount St. Helens (Hildreth and Fierstein, 1995, 1997). Mount Adams currently shows no signs of renewed unrest. Eruptive history does not tell us everything we need to know about hazards at Mount Adams, however, which are fully addressed in the volcano hazard assessment for Mount Adams (W.E. Scott and others, 1995). This volcano has had a long-active hydrothermal system that circulated acidic hydrothermal fluids, formed by the solution of volcanic gases in heated groundwater, through fractures and permeable zones into upper parts of the volcanic cone. Acid sulfate leaching of rocks in the summit area may still be occurring, but chemical and thermal evidence suggests that the main hydrothermal system is no longer active at Mount Adams (Nathenson and Mariner, 2013). However, these rock-weakening chemical reactions have operated long enough to change about 0.4 cubic miles (mi 3 ) (1.7 cubic kilometers [km 3 ]) of the hard lava rock in the volcano’s upper cone to a much weaker clay-rich rock, thus significantly reducing rock strength and thereby slope stability in parts of the cone (Finn and others, 2007). The two largest previous lahars from Mount Adams were triggered by landslides of hydrothermally altered rock from the upper southwestern flank of the cone, and any future large lahars are likely to be triggered by the same mechanism. Mount Rainier also has had extensive hydrothermal alteration of rock in its upper edifice, and it also has a history of large landslides that transform into lahars (K.M. Scott and others, 1995; Vallance and Scott, 1997; Reid and others, 2001). The spatial depiction of modeled lahar inundation zones accompanying this report, shown in two different map perspectives, is intended to augment (not replace) the existing hazard maps for Mount Adams (W.E. Scott and others, 1995; Vallance, 1999). The maps in this report show potential areas of inundation by lahars of different initial volumes, which are determined by a computer model, LAHARZ (Iverson and others, 1998; Schilling, 1998). One map sheet presents LAHARZ-determined inundation areas on a normal plan-view shaded-relief map of the study area; the other gives an oblique perspective of the landscape with raised topography, as if one were viewing the landscape at an angle from an aircraft (Jenny and Patterson, 2007). LAHARZ was developed after the original hazard maps (based only on mapping of geologic deposits) were made. Predicted inundation zones on these maps provide an alternative approach to estimation of areas that could be inundated as lahars of different volumes pass through the valley. However, there is considerable uncertainty in the exact location of the hazard-zone boundaries shown on these maps, as well as on earlier maps.

Washington↗

Massive sulfide deposits of the Southern Appalachians central Virginia volcanic-plutonic belt as a host for massive sulfide deposits

Strata-bound massive sulfide deposits of the central Virginia Piedmont occur in a volcanic- plutonic belt composed of Lower Cambrian(?) metamorphosed volcanic rocks and locally of pre-Upper Ordovician, low potassium granitoid rocks. The belt, interpreted as an ancient island arc, begins about 50 km south of Washington, D. C, and extends some 175 km south- westward. The volcanic rocks within the belt are located along the flanks of the Quantico- Columbia synclinorium and the Arvonia syncline. The Chopawamsic Formation, a western facies of the belt, consists of volcanic rocks that have the geochemical features (rare earth and immobile elements) of a tholeiitic island-arc suite; it also contains calc-alkaline components. Tholeiitic amphibolites of the Ta River Metamorphic Suite on the eastern side of the belt form an oceanward facies of the island arc, coeval with the Chopawamsic. This distribution suggests an underlying westward-dipping Cambrian(?) subduction zone. Contrasts in stratigraphy, geochemistry, and magnetic and gravity features indicate that the central Virginia volcanic- plutonic belt is not related to the Carolina slate belt as has been proposed in the past. Known sulfide bodies in the Chopawamsic and its coeval units total about 13.5 million tons. The Mineral district on the northwest flank of the Quantico-Columbia synclinorium has the largest deposits and contains about 10 million tons. Sulfide bodies in the belt consist largely of pyrite with minor sphalerite and chalcopyrite; Zn and Pb are important in a few of the smaller deposits. There are local concentrations of sphalerite and other base metal minerals within the major pyritic deposits (Zn = 1-12.5%; Cu - 1-2%; Pb as much as 5%). The dom- inantly sphaleritic deposits are found in and northward for about 15 km from the Mineral district. Sulfide mineralization is found in all types of volcanic rock, but the large sulfide bodies on the northwest flank of the Quantico-Columbia synclinorium are in felsite. Am- phibolite, containing local beds of iron-formation, is abundant on the southeast flank of the Arvonia syncline; however, most sulfide mineralization there took place in felsitic to intermediate layers. Mineralization, attributed to submarine volcanic exhalation, took place during formation of the island arc.

Economic Geology↗

Stratigraphy and structure of the tatum salt dome area, southeastern Mississippi and northeastern Washington Parish, Louisiana

In the 3000-square-mile area of southeastern Mississippi and northeastern Washington Parish , Louisiana , which has Tatum dome in its center, rocks of known Jurassic to Recent age are more than 20,000 feet thick. They are underlain by an unknown thickness of Louann Salt of Jurassic (?) age. The age, thickness, and nature of the sedimentary rocks between the salt and the basement, as well as the character of the basement, are unknown. The salt in the northern half of the area has moved upward to shallow depths as diapirs in overlying rocks. Outside of the area of shallow-piercement domes there are more deeply seated domes, ridges, and anticlines that may be the result of vertical movement of the salt . The Wiggins anticline in the south and, southwest of it, an area dipping more steeply to the southwest probably were not affected by salt movement. Structural maps of four horizons and isopach maps of rocks in the three intervals between them give information about the sedimentary and structural history of the region since the end of Early Cretaceous time. The horizons contoured mark either unconformities or the upper boundaries of zones of fairly uniform structural history. The top of the Lower Cretaceous rocks dips generally to the west. Upper Cretaceous rocks dip to the west-southwest and thicken to the northeast. Pre-Miocene Tertiary rocks dip to the southwest and thicken to the northwest. Miocene and later rocks dip and thicken to the south-southwest. The structure of the older formations is considerably more irregular than that of the younger ones; domes, ridges, and basins that were conspicuous in the Early Cretaceous became less pronounced as younger sediments progressively covered them. Of the eight shallow-piercement domes with which the author is familiar, three are known to have penetrated Oligocene rocks; two, middle Eocene; one, lower Eocene; one, Upper Cretaceous; and one, Lower Cretaceous. Some movement has taken place at Tatum dome since the sandy, gravelly Citronelle Formation was laid down.

Louisiana, Mississippi↗

Yakima basalt of the Tieton River area, south-central Washington

Up to 1700 feet of the upper Miocene-lower Pliocene Yakima Basalt of the Columbia River Group underlie much of the eastern flank of the Cascade Range in the Tieton River area, Yakima County, Washington. Local prebasalt relief was more than 1700 feet, so thicknesses of each of the 15 exposed flows vary widely. Single flows can be traced for many miles, and terminate only against local topographic highs. The flows show typical colonnade-entablature jointing, and commonly overlie thin pillow-palagonite complexes. The basalts have Yakima-type chemistry. Plagioclase varies chiefly from An 65 (microphenocrysts) to An 45 (microlites). Clinopyroxenes range from Ca-rich pigeonite to augite, with subcalcic augite most abundant. Complex continuous zoning with respect to optic angles occurs between all the clinopyroxene phases. Olivine is sparse, and phenocrysts of all minerals are rare. Plots of 40 modal analyses indicate that plagioclase and pyroxene began crystallizing at about the same time, and crystallized at the same rate until the flows were at least 75 per cent crystalline. Individual flows differ in their plagioclase/pyroxene ratios and, to a lesser degree, in other microscopic characteristics. Therefore they can be correlated between the measured sections. The stratigraphy thus defined indicates that the youngest flow in the area is slightly older than the Vantage Sandstone Member (about 13.5 m.y.), a prominent sedimentary interbed farther east on the Columbia River Plateau. Flow directions show that the basalts advanced into the area from the east and southeast. Sedimentary interbeds between some of the flows contain a heavy mineral suite indicative of a northern or northeastern provenance, and crossbedding measurements suggest westward and southwestward current directions. The regional paleoslope, therefore, sloped westward or southwestward; and the basalts probably extended somewhat beyond the present Cascade Crest before being dammed by the ancient Western Cascades. Floods of pyrogenic hornblende in the interbeds and overlapping K/A ages suggest sporadic explosive activity of Tatoosh-type plutons in the Cascades contemporaneous with Yakima extrusions. The basalts are warped into five nearly west-trending folds and an eastward-sloping homocline. The homocline is related directly to Cascade uplift, which may have begun at about the time that Yakima-type flows ceased flooding the area.

Geological Society of America Bulletin↗

Coarse sediment dynamics in a large glaciated river system: Holocene history and storage dynamics dictate contemporary climate sensitivity

The gravel-bedded White River drains a 1279 km 2 basin in Washington State, with lowlands sculpted by continental glaciation and headwaters on an actively glaciated stratovolcano. Chronic aggradation along an alluvial fan near the river’s mouth has progressively reduced flood conveyance. In order to better understand how forecasted climate change may influence coarse sediment delivery and aggradation rates in this lowland depositional setting, we assessed the contemporary delivery and routing of coarse sediment through the watershed; this assessment was based on a rich set of topographic, sedimentologic, and hydrologic data from the past century, with a focus on repeat high-resolution topographic surveys from the past decade. We found that most of the lower river’s contemporary bed-load flux originates from persistent erosion of alluvial deposits in the lower watershed. This erosion is a response to a drop in local base level caused by a major avulsion across the fan in 1906 and then augmented by subsequent dredging. The 1906 avulsion and modern disequilibrium valley profiles reflect landscape conditioning by continental glaciation and a massive mid-Holocene lahar. In the proglacial headwaters, infrequent large sediment pulses have accomplished most of the observed coarse sediment export, with exported material blanketing downstream valley floors; during typical floods, transported bed material is largely sourced from erosion of these valley floor deposits. Throughout the watershed, we observe decadal-scale coarse sediment dynamics strongly related to the filling or emptying of valley-scale sediment storage over 10 2 −10 4 yr time scales, often in response to major disturbances that either emplace large deposits or influence their redistribution. Paraglacial responses in large watersheds are suggested to be inherently complicated and punctuated as a result of internal landform interactions and stochastic/threshold-dependent events. We argue, in combination, that Holocene disturbance, storage dynamics, and human flow modification make coarse sediment fluxes in the lower White River relatively insensitive to decadal climate variability. Results highlight the degree to which river sensitivity to contemporary disturbance, climatic or otherwise, may be contingent on local and idiosyncratic watershed histories, underscoring the need to unpack those histories while demonstrating the utility of watershed-scale high-resolution topography toward that end.

Washington↗

Late Mesozoic and possible early Tertiary accretion in western Washington State: The Helena-Haystack mélange and the Darrington-Devils Mountain fault zone

The Helena-Haystack mélange (HH mélange) and coincident Darrington-Devils Mountain fault zone (DDMFZ) in northwestern Washington separate two terranes, the Northwest Cascade System (NWCS) and the western and eastern mélange belts (WEMB). The two terranes of Paleozoic and Mesozoic rocks superficially resemble each other but record considerable differences in structural and metamorphic history. The HH mélange is a serpentinite-matrix mélange containing blocks of adjacent terranes but also exotic blocks of schistose metavolcanic rocks and Jurassic tonalite and associated amphibolite. The HH mélange must have formed between early Cretaceous and late middle Eocene time, because it contains tectonic clasts of early Cretaceous Shuksan Greenschist and is overlain by late middle Eocene sedimentary and volcanic rocks. Less certain constraints on its age are a tectonic clast of metarhyolite that yields 90 Ma metamorphic ages and the presumption that the mélange was emplaced before the outboard Olympic terrane arrived at about 50 Ma. The apparent continuity of the HH mélange and the Decatur terrane of the San Juan Islands suggests that the mélange is the strongly tectonized equivalent of the Fidalgo ophiolite. The out-crop pattern suggests that the HH mélange overlies rocks of the NWCS and it may have formed when the WEMB terranes were thrust over rocks of the NWCS. Much of the exposed belt of the HH mélange is overlain by late middle Eocene feldspathic sandstone and volcanic rocks of the Barlow Pass Volcanics of Vance (1957a), which are cut by numerous faults of the DDMFZ paralleling the mélange. The Barlow Pass Volcanics appear to overlie the Straight Creek fault without large offset, but a displaced exotic block of amphibolite with attached early or early middle Eocene(?) sandstone in the mélange suggests that strike-slip movement along the DDMFZ was synchronous with movement on the Straight Creek fault, and stretched cobbles in the conglomerates of the Barlow Pass Volcanics suggest post-Straight Creek movement. The possible continuation of the DDMFZ to the northwest as the San Juan and the West Coast faults on Vancouver Island suggests That the structure has had a major role in the emplacement of all the westernmost terranes in the Pacific Northwest. This major suture is strongly bowed to the northeast opposite the great oroclinal bend of the Olympic terrane, suggesting that the emplacement of that terrane may have deformed a once straighter strike-slip zone.

Washington↗

Rb-Sr, K-Ar, and stable isotope evidence for the ages and sources of fluid components of gold-bearing quartz veins in the northern Sierra Nevada foothills metamorphic belt, California

Gold-bearing quartz veins occur in and near major fault zones in deformed oceanic and island-arc rocks west of the main outcrop of the Sierra Nevada composite batholith. Veins typically occupy minor reverse faults that crosscut blueschist to amphibolite-grade metamorphic rocks whose metamorphic ages range from early Paleozoic to Jurassic. Vein micas and carbonate-quartz-mica assemblages that formed by hydrothermal metasomatism of ultramafic wall rocks in the Alleghany, Grass Valley, Washington, and Mother Lode districts yield concordant K-Ar and Rb-Sr ages. The dated veins are significantly younger than prograde metamorphism, penetrative deformation, and accretion of their host rocks to the continental margin. New and previously published mineralization ages from 13 localities in the Sierra foothills range from about 140 to 110 m.y. ago, with mean and median between 120 and 115 m.y. The age relations suggest that mineralizing fluids were set in motion by deep magmatic activity related to the resumption of east-dipping subduction along the western margin of North America following the Late Jurassic Nevadan collision event.CO 2 -bearing fluids responsible for metasomatism and much of the vein mica, carbonate, albite, and quartz deposition in several northern mines were isotopically heavy (delta 18 O [asymp] 8-14ppm; delta D between about -10 and -50ppm) and do not resemble seawater, magmatic, or meteoric waters. Metasomatic and vein-filling mica, dolomite, magnesite, and quartz in altered ultramafic rocks generally formed from fluids with similar Sr and O isotope ratios at a given locality. Consistent quartz-mica delta 18 O fractionations (delta 18 O (sub Q-M) = 4.5-4.9ppm) from various localities imply uniform equilibration temperatures, probably between 300 degrees and 350 degrees C. On a local (mine) scale, fluids responsible for both carbonate alteration of mafic and ultramafic wall rocks and albitic alteration of felsic and pelitic rocks had similar Sr isotope ratios.Samples from three veins in the central Alleghany district fit a 115.7 + or - 3-m.y. Rb-Sr isochron with a ( 87 Sr/ 86 Sr) i value of approximately 0.7119. Inferred 87 Sr/ 86 Sr ratios of metasomatic fluids from mines in different parts of the foothills region vary considerably (0.704-0.718), suggesting that Sr was derived from sources ranging from "western assemblage" Mesozoic ophiolitic or arc volcanic rocks to early Paleozoic continent-derived clastic rocks of the Shoo Fly Complex. Systematic geographic variations in both Sr and O isotopes can be rationalized by assuming extensive fluid interaction with rocks similar to the ones that are exposed within a few kilometers of the veins, but the ultimate sources of the fluids, and of Au and other constituents, may be independent of these. Isotopically lighter (meteoric?) fluids deposited some late quartz overgrowths and occupied secondary fluid inclusions in earlier vein quartz.

Economic Geology↗

Estimated average annualized tsunami losses for the United States

Tsunami hazards are substantial threats to coastal communities across the United States (U.S.) and its territories. U.S. states and territories collaborate through the National Tsunami Hazard Mitigation Program (NTHMP) to develop their own tsunami-hazard information for outreach and evacuation planning. An effort to curate this tsunami-hazard information to support comprehensive risk analysis at the national level has not yet been completed. In support of this effort, the Federal Emergency Management Agency (FEMA) collaborated with the NTHMP, the National Oceanic and Atmospheric Administration (NOAA) and the U.S. Geological Survey (USGS) starting in 2023. This collaboration included the collection and analysis of existing tsunami hazard data and methods in the U.S. Tsunami subject matter experts identified and selected scientifically defensible methods for estimating the risks to buildings and populations in coastal communities. These efforts may support decision making regarding resilience policies, priorities, strategies and funding levels. Tsunamis can be triggered by earthquakes, subaerial or submarine landslides, volcanic eruptions, glacial calving, near-earth objects, weather or other events. These events can cause severe destruction, injuries, and loss of life due to powerful currents and flooding. Tsunamis pose a substantial threat to the western United States and all U.S. territories, as described below. ■ Hawaii is threatened by distant tsunamis due to its central location in the Pacific Ocean basin and has a history of local events. ■ Alaska, particularly the Aleutian Islands, faces local tsunami threats due to proximity to the Alaska-Aleutian Subduction Zone, as well as distant tsunamis from around the Pacific Ocean basin. ■ The western coast of the U.S. is threatened by distant tsunamis from around the Pacific Ocean basin and local source tsunamis from earthquakes generated within the Cascadia Subduction Zone in the Pacific Northwest. ■ American Samoa faces local tsunami threats from earthquakes generated in the nearby Tonga Trench, as well as distant tsunami threats. ■ Guam and the Commonwealth of the Northern Mariana Islands are threatened by local tsunamis from the nearby Mariana Subduction Zone, as well as distant sources from around the Pacific Ocean Basin. ■ Puerto Rico and the United States Virgin Islands are threatened by multiple local and distant tsunami sources, such as the Puerto Rico Trench (PRT), given their location in the complex seismic region of the Caribbean Sea. Several historical events stand out because of their catastrophic impacts. ■ In the Pacific Northwest, the 1700 Cascadia earthquake caused a tsunami that affected coastal Native American communities, though the extent of the damage is not fully documented (Ludwin, et al., 2005). ■ In Puerto Rico, the 1918 earthquake triggered a tsunami that caused $77 million in damage in 2022 dollars and 116 fatalities, primarily along the western coast (Coffman et al., 1982). ■ The 1946 Aleutian Islands earthquake triggered a massive tsunami that devastated Hilo, Hawaii, killing 158 people and resulting in approximately $375 million in damage (adjusted to 2022 dollars) (Fisher et al., 2023). ■ The 1964 Alaska earthquake (M 9.2) generated tsunamis that caused severe destruction in some communities across Alaska, Oregon, and California. This disaster led to a total of 124 fatalities and approximately $2.9 billion in property damage (adjusted to 2022 dollars) (Brocher et al., 2014) (Alaska Science Center, 2024). ■ In American Samoa, a tsunami generated by the 2009 Samoa earthquake (Mw 8.1) caused widespread devastation, resulting in 34 confirmed fatalities (Apatu et al., 2013) and economic losses exceeding $160 million (adjusted to 2022 dollars) (DHS, 2011). More recent events, including the 2010 Chile earthquake, the 2011 Japan earthquake, and the 2022 Tonga volcanic eruption, resulted in millions of dollars in damage to numerous ports and harbors in the U.S. South Pacific territories, Hawaii, and along the west coast of the U.S. (Lynett, et al., 2022) (Wilson, et al., 2013). Since these events, the expansion of the built environment in lowlying areas along the coast has increased the exposure of buildings and people, thereby further escalating community risk from tsunamis. This report provides a comprehensive national assessment of earthquake-generated tsunami risk. It does not include impacts from tsunamis generated by landslides, volcanic eruptions, glacial calving, near-earth objects, weather, or other events. This study is based on the best available hazard data from the U.S. Pacific Coast (California, Oregon and Washington), Alaska, Hawaii, U.S. Pacific Territories (American Samoa, Guam and Commonwealth of the Northern Mariana Islands) and Caribbean Territories (Puerto Rico and United States Virgin Islands). Tsunami risks associated with states along the East Coast, Gulf Coast, and Great Lakes are not included in this study because Hazus 6.1 software (FEMA 2024a) does not currently include the ability to analyze tsunami risk in those states. Once modeling capabilities and tsunami hazard data become available for additional states, FEMA may incorporate these data into future editions of this study.

Alaska, California, Hawaii Oregon, Washington↗

Cascadia Margin cold seeps: Subduction zone fluids, gas hydrates, and chemosynthetic habitats

Priority Geographic Area: The outer continental shelf and upper continental slope from Canada/U.S. border offshore Washington State to the Mendocino Fracture Zone (Northern California), entirely within the U.S. Exclusive Economic Zone (EEZ), from the outermost shelf to at least 2000 m water depth (Figure 1). Description of Priority Area: Since 2015, over a thousand water column gas plumes originating at seafloor gas seeps have been discovered landward of the Cascadia deformation front (e.g., Embley et al., 2016; Johnson et al., 2015, 2019; Merle and Embley, 2016; NA-95 Cruise Report, 2018; Riedel et al., 2018), adding to those that had long been known on Hydrate Ridge (e.g., Heeschen et al., 2003; Tréhu et al., 2004). The recently-discovered seeps stretch from offshore Vancouver Island to the Mendocino Fracture Zone and from the outer shelf to ~2000 m water depth, occurring both landward and seaward of the nominal limit for gas hydrate stability zone on the upper continental slope (Figure 1). Hundreds of seeps likely remain undiscovered. Water column imaging is incomplete both within the target geographic area and farther seaward, between the 2000 m isobath and the deformation front, which is the subject of an imaging study described in a white paper by Watt et al. The recently-discovered Cascadia Margin cold seeps partially overlap an important active margin gas hydrate province (Spence et al., 2001; Tréhu et al., 2003, 2004), as well as an area where sediments on the North American plate are folded and faulted and affected by fluids generated in the subduction complex beneath the Cascadia forearc (e.g., Saffer and Tobin, 2011). Several Ocean Drilling Program expeditions have focused on hydrate systems offshore Vancouver and Oregon (e.g., Riedel et al., 2009; Tréhu et al., 2004) and on the connection between the shallow and deep hydrogeologic systems. Cabled observatories now continuously monitor physical, chemical, and venting processes on south Hydrate Ridge (OOI; e.g., Philip et al., 2016a) and offshore Vancouver Island (NEPTUNE; e.g. Römer et al., 2016). Outside of these well-studied gas hydrate areas, a subset of the recently-discovered Cascadia seeps, including some that we visited with R/V Falkor in 2019 (e.g., https://schmidtocean.org/cruise/methane-seeps-at-edge-of-hydrate-stability/), also likely emit methane associated with shallow subseafloor gas hydrate systems. Other seeps are delivering not only methane, but also deep-derived gases (Baumberger et al., 2018, 2020) to the seafloor. Many Cascadia Margin seeps have also been recognized at water depths too shallow (e.g., 175 m) to be connected to gas hydrate dynamics. These seeps are postulated to be emitting gas and fluids that originated deep in accretionary wedge before migrating up normal faults generated during forearc extension associated with large earthquakes (Johnson et al., 2019). Only a small fraction of the recently discovered U.S. Cascadia Margin water column gas plumes has so far been verified by ROVs (Hercules from E/V Nautilus in 2016 and 2018; SuBastian from R/V Falkor in 2018 and 2019) to correspond to seafloor seeps. Careful scientific mapping, investigation, and sampling at the seeps have also been limited (e.g., Baumberger et al., 2018, 2020; Merle and Embley, 2016; Seabrook et al., 2018; Greinert et al. 2019). This white paper focuses on expanding exploration of already-identified U.S. Cascadia Margin cold seeps through a multipronged and multidisciplinary discovery program that could be accomplished with a variety of NOAA assets. The goals of the proposed exploration activities are to develop high-resolution maps of seep fields from deep ocean vehicles; to verify (and sample) seafloor gas emissions at the locations of water column plumes for compositional and isotopic studies; to map, sample, and conduct analyses on chemosynthetic communities and deep-sea coral habitats near seep sites to document species distributions and habitats as a function of depth and latitude along the margin; to collect seep geologic samples that can constrain the timing of methane emissions through geochronology; and to record environmental data (e.g., CTD) near the seafloor and in the water column above the seeps. Seafloor mapping using shipboard systems (multibeam/backscatter) would be needed to characterize seafloor features near seep sites. Water column imaging (EK60/80 and/or multibeam WCD data) conducted before and after seafloor explorations would capture active methane plumes and constrain temporal variations in seep emissions (e.g., Kannberg et al., 2013; Philip et al., 2016a, 2016b), which are known to vary on time scales as rapid as tidal cycles on this margin (e.g., Römer et al., 2016). What are the characterization and data needs in this area? Check all that apply: __x_ Biology, Geology, Physical Oceanography, Chemistry ___ Marine Archaeology ___ Other Provide a list or brief description of the data needed within this area, from your perspective: 1. Water column backscatter to image active gas plumes 2. High-resolution multibeam bathymetry, seafloor backscatter, and shallow sub-bottom imaging 3. Visual characterization and ground truthing of potential seeps, including high-resolution mapping and photography from near-seafloor vehicles; collection of seep-associated species, corals, sediments, authigenic carbonates, gases, and seawater Describe relevance to national security, conservation, and/or the economy: The Cascadia margin seeps provide significant ecosystem services, including habitat for commercially important fishes and support for diversity along the continental margin. Methane seeps are also biological hotspots for krill, plankton, and crustaceans, which in turn sustain higher trophic levels (e.g., whales). Methane-derived authigenic carbonates serve as a hard substrate for deep-sea corals and sponges on millennial time scales. The studies proposed here will elucidate the relationship among seep environments, deep-sea corals, sponges, fisheries, and other organisms and provide new insight into subduction zone and hydrate-associated fluids in this important seismogenic zone. The studies address fishery management concerns and inform future conservation of sensitive species (e.g., deep-sea corals) and benthic habitats. From your perspective, what makes this area unique? The Cascadia Margin seeps are a critical component of the leaky margin that stretches from Baja California to the Aleutian Arc along the Pacific coastline of North America. Cold seeps have been intensely studied on the Gulf of Mexico and U.S. Atlantic passive margins with a focus on chemosynthetic communities, deep-sea corals, and leakage of microbially-generated and/or thermogenic hydrocarbons; however, the recently-discovered Cascadia Margin seeps, as well as active margin seep systems in general, remain more poorly characterized. Such seeps not only contribute to the ocean carbon cycle (e.g., Pohlman et al., 2011), thereby fueling the base of the food chain in these settings, but also emit subduction zone fluids that provide clues about processes within the seismogenic zone and the accretionary complex. The Cascadia seeps area allows both biological (e.g., benthic habitats, coral distributions) and physical processes (e.g., generation of subduction zone fluids) to be studied along both depth (perpendicular to the deformation front) and latitudinal gradients.

California, Oregon, Washington↗

Hydrogeologic Framework of the Yakima River Basin Aquifer System, Washington

The Yakima River basin aquifer system underlies about 6,200 square miles in south-central Washington. The aquifer system consists of basin-fill deposits occurring in six structural-sedimentary basins, the Columbia River Basalt Group (CRBG), and generally older bedrock. The basin-fill deposits were divided into 19 hydrogeologic units, the CRBG was divided into three units separated by two interbed units, and the bedrock was divided into four units (the Paleozoic, the Mesozoic, the Tertiary, and the Quaternary bedrock units). The thickness of the basin-fill units and the depth to the top of each unit and interbed of the CRBG were mapped. Only the surficial extent of the bedrock units was mapped due to insufficient data. Average mapped thickness of the different units ranged from 10 to 600 feet. Lateral hydraulic conductivity (Kh) of the units varies widely indicating the heterogeneity of the aquifer system. Average or effective Kh values of the water-producing zones of the basin-fill units are on the order of 1 to 800 ft/d and are about 1 to 10 ft/d for the CRBG units as a whole. Effective or average Kh values for the different rock types of the Paleozoic, Mesozoic, and Tertiary units appear to be about 0.0001 to 3 ft/d. The more permeable Quaternary bedrock unit may have Kh values that range from 1 to 7,000 ft/d. Vertical hydraulic conductivity (Kv) of the units is largely unknown. Kv values have been estimated to range from about 0.009 to 2 ft/d for the basin-fill units and Kv values for the clay-to-shale parts of the units may be as small as 10-10 to 10-7 ft/d. Reported Kv values for the CRBG units ranged from 4x10-7 to 4 ft/d. Variations in the concentrations of geochemical solutes and the concentrations and ratios of the isotopes of hydrogen, oxygen, and carbon in groundwater provided information on the hydrogeologic framework and groundwater movement. Stable isotope ratios of water (deuterium and oxygen-18) indicated dispersed sources of groundwater recharge to the CRBG and basin-fill units and that the source of surface and groundwater is derived from atmospheric precipitation. The concentrations of dissolved methane were larger than could be attributable to atmospheric sources in more than 80 percent of wells with measured methane concentrations. The concentrations of the stable isotope of carbon-13 of methane were indicative of a thermogenic source of methane. Most of the occurrences of methane were at locations several miles distant from mapped structural fault features, suggesting the upward vertical movement of thermogenic methane from the underlying bedrock may be more widespread than previously assumed or there may be a more general occurrence of unmapped (buried) fault structures. Carbon and tritium isotope data and the concentrations of dissolved constituents indicate a complex groundwater flow system with multiple contributing zones to groundwater wells and relative groundwater residence time on the order of a few tens to many thousands of years. Potential mean annual recharge for water years 1950-2003 was estimated to be about 15.6 in. or 7,149 ft3/s (5.2 million acre-ft) and includes affects of human activities such as irrigation of croplands. If there had been no human activities (predevelopment conditions) during that time period, estimated recharge would have been about 11.9 in. or 5,450 ft3/s (3.9 million acre-ft). Estimated mean annual recharge ranges from virtually zero in the dry parts of the lower basin to more than 100 in. in the humid uplands, where annual precipitation is more than 120 in. Groundwater in the different hydrogeologic units occurs under perched, unconfined, semiconfined, and confined conditions. Groundwater moves from topographic highs in the uplands to topographic low areas along the streams. The flow system in the basin-fill units is compartmentalized due to topography and geologic structure. The flow system also is compartmentalized for the CRBG units but not to as large

Scientific Investigations Report↗