SEARCH · USGS Science

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84Linked to original sources

USGS2012

Holocene behavior of the Brigham City segment: implications for forecasting the next large-magnitude earthquake on the Wasatch fault zone, Utah

The Brigham City segment (BCS), the northernmost Holocene‐active segment of the Wasatch fault zone (WFZ), is considered a likely location for the next big earthquake in northern Utah. We refine the timing of the last four surface‐rupturing (~Mw 7) earthquakes at several sites near Brigham City (BE1, 2430±250; BE2, 3490±180; BE3, 4510±530; and BE4, 5610±650 cal yr B.P.) and calculate mean recurrence intervals (1060–1500 yr) that are greatly exceeded by the elapsed time (~2500 yr) since the most recent surface‐rupturing earthquake (MRE). An additional rupture observed at the Pearsons Canyon site (PC1, 1240±50 cal yr B.P.) near the southern segment boundary is probably spillover rupture from a large earthquake on the adjacent Weber segment. Our seismic moment calculations show that the PC1 rupture reduced accumulated moment on the BCS about 22%, a value that may have been enough to postpone the next large earthquake. However, our calculations suggest that the segment currently has accumulated more than twice the moment accumulated in the three previous earthquake cycles, so we suspect that additional interactions with the adjacent Weber segment contributed to the long elapse time since the MRE on the BCS. Our moment calculations indicate that the next earthquake is not only overdue, but could be larger than the previous four earthquakes. Displacement data show higher rates of latest Quaternary slip (~1.3 mm/yr) along the southern two‐thirds of the segment. The northern third likely has experienced fewer or smaller ruptures, which suggests to us that most earthquakes initiate at the southern segment boundary.

Utah↗

USGS2014

A V S30 map for California with geologic and topographic constraints

For many earthquake engineering applications, site response is estimated through empirical correlations with the time‐averaged shear‐wave velocity to 30 m depth ( V S 30 ). These applications therefore depend on the availability of either site‐specific V S 30 measurements or V S 30 maps at local, regional, and global scales. Because V S 30 measurements are sparse, a proxy frequently is needed to estimate V S 30 at unsampled locations. We present a new V S 30 map for California, which accounts for observational constraints from multiple sources and spatial scales, such as geology, topography, and site‐specific V S 30 measurements. We apply the geostatistical approach of regression kriging (RK) to combine these constraints for predicting V S 30 . For the V S 30 trend, we start with geology‐based V S 30 values and identify two distinct trends between topographic gradient and the residuals from the geology V S 30 model. One trend applies to deep and fine Quaternary alluvium, whereas the second trend is slightly stronger and applies to Pleistocene sedimentary units. The RK framework ensures that the resulting map of California is locally refined to reflect the rapidly expanding database of V S 30 measurements throughout California. We compare the accuracy of the new mapping method to a previously developed map of V S 30 for California. We also illustrate the sensitivity of ground motions to the new V S 30 map by comparing real and scenario ShakeMaps with V S 30 values from our new map to those for existing V S 30 maps.

California↗

USGS2016

Continuity of the Reelfoot fault across the Cottonwood Grove and Ridgely faults of the New Madrid Seismic Zone

Previous investigators have argued that the northwest-striking Reelfoot fault of northwest Tennessee and southeastern Missouri is segmented. One segment boundary is at the intersection of the northeast-striking Cottonwood Grove and Ridgely strike-slip faults with the Reelfoot fault. We use seismic reflection and geologic mapping to locate and determine the history of the Reelfoot South fault across this boundary zone. One reflection profile revealed a southwest-dipping (81°) Reelfoot South reverse fault that displaces the top of the Paleozoic 65 m, Cretaceous 40 m, Paleocene 31 m, Eocene Wilcox Group 20 m, and Eocene Memphis Sand 16 m. A second reflection profile reveals a north-dipping (84°) reverse fault 4.3 km south of the Reelfoot South fault, which defines the southwest margin of the Tiptonville dome. A geologic profile of the base of the ∼3:1 Ma Upland complex (Mississippi River terrace alluvium) within theMississippi River bluffs reveals ∼6 m of displacement across the Reelfoot South fault. Similarly, Quaternary stream terrace distribution suggests ∼6 m of Reelfoot South hanging-wall (Tiptonville dome) uplift that is probably Holocene. Fault strike trends show the Reelfoot fault and its hanging-wall Tiptonville dome are not laterally offset across the Cottonwood Grove and Ridgely faults. The Reelfoot South fault northwest and southeast of the Cottonwood Grove and Ridgely faults has very similar vertical displacement on common stratigraphic marker horizons in the upper 900 m. These data indicate the Reelfoot fault/Tiptonville dome has acted as one continuous fault zone across the Cottonwood Grove and Ridgely faults since Late Cretaceous.

Missouri, Tennessee↗

USGS2019

Neotectonic and paleoseismic analysis of the northwest extent of Holocene surface deformation along the Meers Fault, Oklahoma

TheMeers fault (Oklahoma) is one of fewseismogenic structures with evidence for Holocene surface rupture in the stable continental region of North America. The 37-kilometer-long southeast section of the full 54-kilometer-long Meers fault is interpreted to be Holocene active. The 17-kilometer-long northwest section is considered Quaternary active, but not Holocene active.We reevaluate surface expression and earthquake timing of the northwest Meers fault to improve seismic source characterization.We use airborne light detection and ranging and historical stereopaired aerial photos to evaluate the fault scarp and local faultzone geomorphology. In the northwest, complex surface deformation includes fault splays, subtle monoclinal warping, and a minor change in fault strike. We interpret that the alongstrike transition from surface faulting on the southeastMeers fault to surface folding on the northwest Meers fault occurs at the lithologic contact between Permian Post Oak conglomerate and Hennessey shale. We excavated a paleoseismic trench to evaluate the timing of surface-deforming earthquakes on the northwest section of the fault. The excavation revealed weathered Permian Hennessey shale and an ∼1–2-meter-thick veneer of Holocene alluvial deposits that were progressively deformed during two surface-folding earthquakes likely related to blind fault rupture beneath the site. Repeated onlapping to overlapping stratigraphic sequences and associated unconformities are intimately related to folding events along the monocline. OxCal paleoearthquake age modeling indicates that earthquakes occurred 4704–3109 yr B.P. and 5955–4744 yr B.P., and that part of the northwest section of the Meers fault is Holocene active. We find the Holocene-active section of the Meers fault should be lengthened 6.1 km to the northwest, to a total Holocene-active fault length of 43 km. Empirical scaling relationships between surface rupture length and magnitude reveal that the fault could generate an Mw 7.0 earthquake.

Oklahoma↗

USGS2019

Shallow structure and geomorphology along the offshore northern San Andreas Fault, Tomales Point to Fort Ross, California

We mapped a poorly documented 35-km-long section of the northern San Andreas fault zone (NSAF) between Tomales Point and Fort Ross, California. Mapping is largely based on high-resolution seismic-reflection profiles (38 fault crossings), multibeam bathymetry, and onshore geology. NSAF strike in this section is nearly parallel to plate motion, characterized by a slight (~2°) northerly (transtensional) bend in the south between Tomales Bay and the Bodega isthmus, and a northwesterly (transpressional) ~5° bend in the north between the Bodega isthmus and Fort Ross. The southern transtensional bend is the northern part of the now-submerged, linear, ~50-km-long and 1- to 2-km-wide, "Tomales-Bodega valley." The valley floor is cut by a complex zone of subparallel, variably continuous fault strands and the deformed valley fill is an inferred mix of late Quaternary marine and nonmarine strata. In the northern part of this elongate valley, Holocene fault offset occurred on two fault strands about 740 m apart. The northern transpressional bend is characterized by narrow, elongate, asymmetric basins containing as much as 56 m of inferred latest Pleistocene to Holocene sediment. Between Bodega Head and Fort Ross, the gently dipping (~0.8°) shelf includes two large (4.8 and 5.9 km2) zones of sediment failure that we speculatively correlate with the 1906 San Francisco NSAF earthquake. Similar sediment-failure zones should be common along offshore reaches of the NSAF and other nearshore fault zones, but have apparent limited preservation potential. Onland geomorphic impacts of the mainly offshore NSAF include: (1) Northward upwarping of uplifted marine terraces in the transpressional zone north of Bodega Bay; and (2) Blocking of littoral sediment transport by uplifts on the west flank of the NSAF at Bodega Head and Tomales Point, resulting in rapidly accreting beaches and large coastal sand dune complexes.

California↗

USGS2020

Evidence of previous faulting along the 2019 Ridgecrest, California earthquake ruptures

The July 2019 Ridgecrest earthquake sequence in southeastern California was characterized as surprising because only ~35% of the rupture occurred on previously mapped faults. Employing more detailed inspection of pre-event high-resolution topography and imagery in combination with field observations, we document evidence of active faulting in the landscape along the entire fault system. Scarps, deflected drainages, and lineaments and contrasts in topography, vegetation, and ground color demonstrate previous slip on a dense network of orthogonal faults, consistent with patterns of surface rupture observed in 2019. Not all of these newly mapped fault strands ruptured in 2019. Outcrop-scale field observations additionally reveal tufa lineaments and sheared Quaternary deposits. Neotectonic features are commonly short (<2 km), discontinuous, and display en echelon patterns along both the M 6.4 and M 7.1 ruptures. These features are generally more prominent and better preserved outside the late Pleistocene lake basins. Fault expression may also be related to deformation style: scarps and topographic lineaments are more prevalent in areas where substantial vertical motion occurred in 2019. Where strike-slip displacement dominated in 2019, the faults are mainly expressed by less prominent tonal and vegetation features. Both the NE- and NW-trending active fault systems are subparallel to regional bedrock fabrics that were established as early as ~150 Ma, and may be reactivating these older structures. Overall, we estimate that 50-70% (i.e., an additional 15-35%) of the 2019 surface ruptures could have been recognized as active faults with detailed inspection of pre-event data. Similar detailed mapping of potential neotectonic features could help improve seismic hazard analyses in other regions of eastern California and elsewhere that have distributed faulting or incompletely mapped faults. In areas where faults cannot be resolved as single thoroughgoing structures, a zone of potential faulting should be used as a hazard model input.

California↗

USGS2023

Slip deficit rates on southern Cascadia faults resolved with viscoelastic earthquake cycle modeling of geodetic deformation

The fore‐arc of the southern Cascadia subduction zone (CSZ), north of the Mendocino triple junction (MTJ), is home to a network of Quaternary‐active crustal faults that accumulate strain due to the interaction of the North American, Juan de Fuca (Gorda), and Pacific plates. These faults, including the Little Salmon and Mad River fault (LSF and MRF) zones, are located near the most populated parts of California’s north coast and show paleoseismic evidence for three slip events of several‐meter scale in the past 1700 yr. However, the geodetic slip rates of these faults are poorly constrained. In this work, we analyze a new compilation of interseismic geodetic velocities from Global Navigation Satellite Systems, leveling, and tide gauge data near the MTJ to constrain present‐day slip deficit rates on upper‐plate faults and coupling on the megathrust. We construct Green’s functions for interseismic slip deficit for discrete faults embedded in an elastic plate overlying a viscoelastic mantle. We then use a constrained least‐squares inversion to determine best‐fitting slip rates on the major faults and investigate slip rate trade‐offs between faults. Results indicate that the LSF and MRF systems together accumulate 4–5 mm/yr of reverse‐slip deficit, although their separate slip rates cannot be determined independently. Modeling of the horizontal and vertical velocities suggests that the southernmost CSZ is coupled interseismically to deeper than 25 km depth. We also find that 6–17 mm/yr of right‐lateral slip deficit extends north of the MTJ and into the southern Cascadia fore‐arc. These results reinforce the notion that both the southernmost Cascadia megathrust and the smaller fore‐arc faults above it contribute to regional seismic hazard.

California, Oregon, Washington↗

USGS2015

Ground motion observations of the 2014 South Napa earthquake

Ground motions of the South Napa earthquake (24 August 2014; M 6.0) were recorded at 19 stations within 20 km and 292 stations within 100 km of the rupture surface trace, generating peak ground motions in excess of 50% g and 50  cm/s in and near Napa Valley. This large dataset allows us to compare the ground motion from the earthquake to existing ground‐motion prediction equations (GMPEs) in considerable detail. Using the ground‐motion data compiled and reported by ShakeMap ( Wald et al. , 2000 ), we examine the peak ground acceleration (PGA) and peak ground velocity (PGV), as well as the pseudospectral acceleration (PSA) at periods of 0.3, 1.0, and 3.0 s. At the higher frequencies, especially PGA, data recorded at close distances (within &sim;20  km) are very consistent with the GMPEs, implying a stress drop for this event similar to the median for California, that is, 5 MPa ( Baltay and Hanks, 2014 ). At all frequencies, the attenuation with distance is stronger than the GMPEs would predict, which suggests the attenuation in the Napa and San Francisco Bay delta region is stronger than the average attenuation in California. The spatial plot of the ground‐motion residuals is positive to the north, in both Napa and Sonoma Valleys, consistent with increases in amplitude expected from both the directivity and basin effects. More interestingly, perhaps, there is strong ground motion to the south in the along‐strike direction, particularly for PSA at 1.0 s. These strongly positive residuals align with an older, Quaternary fault structure associated with the Franklin or Southampton fault, potentially indicating a fault‐zone‐guided wave.

California↗

USGS2015

The Mw6.0 24 August 2014 South Napa earthquake

The M w 6.0 South Napa earthquake, which occurred at 10:20 UTC 24 August 2014 was the largest earthquake to strike the greater San Francisco Bay area since the M w 6.9 1989 Loma Prieta earthquake. The rupture from this right‐lateral earthquake propagated mostly unilaterally to the north and up‐dip, directing the strongest shaking toward the city of Napa, where peak ground accelerations (PGAs) between 45% g and 61% g were recorded and modified Mercalli intensities (MMIs) of VII–VIII were reported. Tectonic surface rupture with dextral slip of up to 46 cm was observed on a 12.5 km long segment, some of which was along a previously mapped strand of the West Napa fault system, although the rupture extended to the north of the mapped Quaternary strand. Modeling of seismic and geodetic data suggests an average coseismic slip of 50 cm, with a maximum slip of about 1 m at depths of 10–11 km. We observed up to 35 cm of afterslip along the surface trace in the week following the mainshock, primarily along the southern half of the surface rupture that experienced relatively little coseismic offset. Relocation of the sparse aftershock sequence suggests en echelon southwest‐ and northeast‐dipping fault planes, reflective of the complex fault geometry in this region. The Napa basin and historic and late Holocene alluvial flood deposits in downtown Napa amplified the ground motions there. Few ground failures were mapped, reflecting the dry season (as well as a persistent drought that had lowered the groundwater table) and the short duration of strong shaking in the epicentral area.

California↗

USGS2021

Field response and surface rupture characteristics of the 2020 M6.5 Monte Cristo Range earthquake, central Walker Lane, Nevada

The M 6.5 Monte Cristo Range earthquake that occurred in the central Walker Lane on 15 May 2020 was the largest earthquake in Nevada in 66 yr and resulted in a multidisciplinary scientific field response. The earthquake was the result of left‐lateral slip along largely unmapped parts of the Candelaria fault, one of a series of east–northeast‐striking faults that comprise the Mina deflection, a major right step in the north–northwest structural grain of the central Walker Lane. We describe the characteristics of the surface rupture and document distinct differences in the style and orientation of fractures produced along the 28 km long rupture zone. Along the western part of the rupture, left‐lateral and extensional displacements occurred along northeasterly and north‐striking planes that splay off the eastern termination of the mapped Candelaria fault. To the east, extensional and right‐lateral displacements occurred along predominantly north‐striking planes that project toward well‐defined Quaternary and bedrock faults. Although, the largest left‐lateral displacement observed was ∼ 20 cm ⁠ , the majority of displacements were < 5 cm and were distributed across broad zones up to 800 m wide, which are not likely to be preserved in the geologic record. The complex pattern of surface rupture is consistent with a network of faults defined in the shallow subsurface by aftershock seismicity and suggests that slip partitioning between east‐striking left‐lateral faults and north to northwest‐striking right‐lateral faults plays an important role in accommodating northwest‐directed transtension in the central Walker Lane.

Nevada↗

USGS2022

Western U.S. geologic deformation model for use in the U.S. National Seismic Hazard Model 2023

Fault geometry and slip rates are key input data for geologic deformation models, which are a fundamental component of probabilistic seismic hazard analyses (PSHAs). However, geologic sources for PSHA have traditionally been limited to faults with field‐based slip rate constraints, which results in underrepresentation of known, but partially characterized, active faults. Here, we evaluate fault geometries and geologic fault slip rates for the western United States to construct a new geologic deformation model for the U.S. National Seismic Hazard Model 2023 update (NSHM23). In previous NSHM iterations, only faults with published geologic slip rates were included. In the NSHM23 fault sections database compilation, this inclusion criterion was expanded to include faults without known slip rates. In this updated geologic deformation model, preferred slip rates and associated uncertainty distributions are incorporated for faults with slip rates derived from field studies. For faults without site‐specific slip rates, we evaluate a suite of uncertainty distributions derived from broad slip rate categories in the U.S. Geological Survey Quaternary Fault and Fold Database. Preferred slip rate distributions are selected via comparison with geodetic strain rates in tectonic subregions. The resultant moment of the geologic deformation model is generally in deficit compared with the geodetic moment within each region. Primary advances in the NSHM23 geologic deformation model include the following: (1) slip rates are presented as preferred values with uncertainties rather than single values; (2) the representation of the western U.S. active fault network is more complete; and (3) the geologic deformation model leverages geodetic information to assess regional constraints on geologic fault slip rates.

Seismological Research Letters↗

USGS2025

A newly identified creeping strand of the Concord fault, San Francisco Bay Area

The Concord fault constitutes a major branch of the Pacific–North America transform plate boundary in Northern California, bridging the strike‐slip Bartlett Springs ‐ Green Valley Fault system to the north with the Greenville and Calaveras Faults to the south. Like many faults in the San Francisco Bay Area its long‐term slip is partially accommodated by aseismic slip (creep). Although creep has been recognized and monitored on the northern half of the fault for decades, the precise location of the southern half of the fault and its slip rate—whether accommodated seismically or aseismically—has remained enigmatic. How slip transfers between the Concord and Greenville or Calaveras faults to the south remains an outstanding question. New field observations presented here indicate that the active trace of the fault south of downtown Concord is not where previously interpreted and is indeed actively creeping. We report observations of shallow creep continuing >7 km farther south along the Concord fault than previously reported, along a fault strand not previously recognized for most of its length. This is evident as right‐laterally deflected concrete curbs and sidewalk slabs on both sides of every street that crosses the fault at a high angle in southeast Concord and northeast Walnut Creek. We document the magnitude and location of these deflections to estimate accumulated right‐lateral aseismic slip expressed in engineered structures. Offsets of these piercing lines range from 8 to 18 cm, over widths varying from narrow breaks along centimeter‐scale concrete joints to 10‐m‐wide zones of deflection. Significantly, this active trace is ∼400 m west of where the Quaternary active trace has previously been inferred, placing it within—rather than bounding—the built area of suburban Concord. Slip along the fault has already caused infrastructure damage. These results revise our understanding of the southern Concord fault and help constrain its seismic potential.

California↗

USGS2024

Shallow faulting and folding beneath south‐central Seattle, Washington State, from land‐based high‐resolution seismic‐reflection imaging

The geologic framework of the Seattle fault zone (SFZ) has been extensively studied, but the structure and fault strand locations in the central portion of the fault zone through the city of Seattle have remained controversial. Much of what is known about the SFZ has come from light detection and ranging (lidar)‐topographic surveys and paleoseismic investigations of fault scarps primarily west of Puget Sound, regional gravity and aeromagnetic modeling, and multiscale marine seismic imaging in waters both west and east of Seattle. We analyze ∼24 km of land‐based P ‐wave seismic‐reflection data that fill in a critical gap in our understanding of the SFZ beneath the urban areas of West Seattle, south‐central Seattle, and Mercer Island. These data image deformed strata in the upper 1 km, including upwarped Tertiary rock and younger sediments. Collectively, these data provide evidence for multiple Quaternary‐active thrust faults, back thrusts, and sub‐basins within the SFZ beneath the city of Seattle. The results indicate that multiple and potentially active back thrusts in the upper ∼500 m extend across the length of the SFZ and the entire urban corridor that may be analogous to those on Bainbridge Island west of Puget Sound.

Washington↗

USGS1995

Ribbon Cliff landslide Washington, and the earthquake of 14 December 1872

Estimates of the epicentral location and maximum intensity of the earthquake of 14 December 1872, the largest and oldest historic earthquake documented in the Pacific Northwest, are controversial largely because the estimates are based on ground effects. The Ribbon Cliff landslide is one of the more critical ground effects used to argue that the epicenter was in the vicinity of Lake Chelan in central Washington. Sketchy historical accounts link the Ribbon Cliff landslide to the 1872 earthquake, but a subsequent study disputed the historical accounts and, on the basis of dendrochronology, concluded that the landslide occurred more than 100 yr prior to the earthquake. However, Quaternary stratigraphic relations and the results of multiple dating techniques reported here indicate that the main Ribbon Cliff landslide probably occurred within a 14-yr period that includes the time of the 1872 earthquake. Although our study supports the historical accounts that link the landslide to the December 1872 earthquake, it does not prove that seismic shaking triggered the landslide.

Washington↗

USGS1996

On the coherence of ground motion in the San Fernando valley

We present an analysis of the coherence of seismic ground motion recorded on alluvial sediments in the San Fernando Valley, California. Using aftershocks of the 17 January 1994 M w 6.7 earthquake recorded at a quasi-dense array of portable stations, we analyze the coherence of three well-recorded magnitude 3.7 to 4.0 events over the frequency range 0.5 to 15 Hz and a distance range of 0.5 to 5.3 km. All stations are located at sites with broadly similar near-site geology, characterized by medium to fine-grain Quaternary alluvial sediments. On average, relatively high values of coherence are observed for distances up to 3 to 4 km and frequencies up to 2 to 3 Hz; coherence drops sharply at frequencies near and above 3 Hz. Although average coherence functions are described reasonably well by a log-linear relationship with frequency, the curves at all distances exhibit a flattening at low frequencies that is not consistent with previous observations of coherence at hardrock sites. The distance decay of coherence is also markedly less strong, with high coherence values observed over station separations corresponding to multiple wavelengths. This may reflect fundamental differences in shallow-wave propagation in the two environments, with high-frequency scattering relatively more dominant in regions of hard-rock near-surface geology. Within a sedimentary basin or valley, the site response itself generally reflects a resonance phenomenon that may tend to give rise to more uniform ground motions. However, previous studies have demonstrated the existence of pathological focusing and amplification effects within complex sedimentary basin environments such as the greater Los Angeles region; our results undoubtedly do not quantify the full range of ground-motion variability at all sites, but rather represent the level of that variability that can be expected, and quantified, for typical source/receiver paths.

California↗

USGS1997

Proterozoic structure, Cambrian rifting, and younger faulting as revealed by a regional seismic reflection network in the southern Illinois Basin

Four high-quality seismic reflection profiles through the southern Illinois Basin, totaling 245 km in length, provide an excellent regional subsurface stratigraphic and structural framework for evaluation of seismic risk, hydrocarbon occurrence, and other regional geologic studies. These data provide extensive subsurface information on the geometry of the intersection of the Cambrian Reelfoot and Rough Creek rifts, on extensive Proterozoic reflection sequences, and on structures (including the Fluorspar Area Fault Complex and Hicks Dome) that underlie a transitional area between the well-defined New Madrid seismic zone (to the southwest) and a more diffuse area of seismicity in the southern Illinois Basin. Our principal interpretations from these data are listed here in order of geologic age, from oldest to youngest: Prominent Proterozoic layering, possibly equivalent to Proterozoic (∼1 Ga) Middle Run Formation clastic strata and underlying (1.3–1.5 Ga) volcanic rocks of the East Continent rift basin, has been strongly deformed, probably as part of the Grenville foreland fold and thrust belt. A well-defined angular unconformity is seen in many places between Proterozoic and Cambrian strata; a post-Grenville Proterozoic sequence is also apparent locally, directly beneath the base of the Cambrian. We infer a major reversal in Cambrian rift polarity (accommodation zone) in the Rough Creek Graben in western Kentucky. Seismic facies analysis suggests the presence of basin-floor fan complexes at and near the base of the Cambrian interval and within parts of a Proterozoic post-Grenville sequence in several parts of the Rough Creek Graben. There is an abrupt pinchout of the Mount Simon Sandstone against crystalline basement beneath the Dale Dome (near the Texaco no. 1 Cuppy well, Hamilton County) in southeastern Illinois, and a more gradual Mount Simon pinchout to the southeast. Where crossed by the seismic reflection line in southeast Illinois, some faults in the Wabash Valley Fault System produce discrete offset in Ordovician and younger strata only; one of the Wabash Valley faults cuts the top of the Precambrian on this seismic profile. The data show clear evidence of late Paleozoic reverse faulting along both boundaries of the Rough Creek Graben in western Kentucky, although significant unreactivated Cambrian rift-bounding faults are also preserved. Chaotic reflection patterns in the lower and middle Paleozoic strata near Hicks Dome, southern Illinois, are related to a combination of intrusive brecciation, intense faulting, and alteration of carbonate strata by acidic mineralizing fluids, all of which occurred in the Permian. Late Paleozoic(?) reverse faulting is interpreted on one flank of the Rock Creek Graben, southern Illinois. Permian and Mesozoic(?) extensional faulting is clearly imaged in the Fluorspar Area Fault Complex; neotectonic studies suggest that these structures were reactivated in the Quaternary.

Illinois, Indiana, Kentucky, Missouri↗

USGS2000

Preliminary report on the 16 October 1999 M 7.1 Hector mine, California, earthquake

The M w 7.1 Hector Mine, California, earthquake occurred at 9:46 GMT on 16 October 1999. The event caused minimal damage because it was located in a remote, sparsely populated part of the Mojave Desert, approximately 47 miles east-southeast of Barstow, with epicentral coordinates 34.59°N 116.27°W and a hypocentral depth of 5 ± 3 km. Twelve foreshocks, M 1.9-3.8, preceded the mainshock during the previous twelve hours. All of these events were located close to the hypocenter of the mainshock. The Hector Mine earthquake occurred within the Eastern California Shear Zone (ECSZ). By virtue of its remote location, the societal impact of the Hector Mine earthquake was, fortunately, minimal in spite of the event's appreciable size. The ECSZ is characterized by high seismicity, a high tectonic strain rate, and a broad, distributed zone of north-northwest-trending faults (ECSZ; Figure 1 ; Dokka and Travis, 1990 ; Sauber et al., 1986 ; Sauber et al., 1994 ; Sieh et al., 1993 ). Data regarding the slip rates of faults within the ECSZ suggest that on the order of 15% of the Pacific-North American plate motion occurs along this zone ( Sauber et al., 1986 ; Wesnousky, 1986 ). Most of the faults in the ECSZ have low slip rates and long repeat times for major earthquakes, on the order of several thousands to tens of thousands of years. The occurrence of the Hector Mine earthquake within seven years and only about 30 km east of the 1992 M w 7.3 Landers earthquake suggests that the closely spaced surface faults in the ECSZ are mechanically related. The Hector Mine event involved rupture on two previously mapped fault zones—the Bullion Fault and an unnamed, more northerly-trending fault that is informally referred to in this paper as the Lavic Lake Fault (Dibblee, 1966 , 1967a , b ). Traces of the Bullion Fault exhibit evidence of Holocene displacement and were zoned as active in 1988 under California's Mquist-Priolo Earthquake Fault Zoning Act ( Hart and Bryant, 1997 ). The pattern of rupture along more than one named fault was also observed from the 1992 Landers earthquake ( Hauksson et al., 1993 ; Sieh et al., 1994). Much of the fault zone that produced the Hector Mine earthquake had been buried by relatively young stream deposits, and the fault scarps in bedrock have a subdued morphology. It appears that these faults have not experienced significant offset for perhaps 10,000 years or more ( Hart, 1987 ). Planned future investigations will refine the age of the last event on these faults. The portion of the Lavic Lake Fault that ruptured between the northern end of the Bullion Mountains and Lavic Lake had not previously been mapped. However, our field investigations have identified ancient, subdued fault scarps along portions of the 1999 rupture zone in this area. It thus appears that the entire segment of the Lavic Lake Fault that was involved in the 1999 event had ruptured in the past. As is typical for most faults within the Eastern California Shear Zone, the rate of movement along the Lavic Lake Fault may be quite slow (<1 mm/yr) and should produce earthquakes only infrequently. This event is a reminder that faults that have ruptured in late Quaternary time, but that lack evidence of Holocene displacement, can still produce earthquakes in this low-slip-rate tectonic setting. Additionally, the Hector Mine earthquake is noteworthy for a couple of other reasons. First, it clearly produced triggered seismicity over much of southern California, from the rupture zone toward the south-southwest in particular. Second, as we will discuss, the event may provide new data and insight into recently developed paradigms concerning earthquake interactions and the role of static stress changes. Questions such as these will, of course, be the subject of extensive detailed analyses in years to come. Fortunately, the Hector Mine sequence will provide one of the best data sets obtained to date for a significant earthquake in the United States. Because it occurred when major upgrades to both the regional seismic network (TriNet) and the regional geodetic network (SCIGN) were well underway, the Earth science community will have abundant high-quality data with which to explore the important and interesting questions that have been raised. In this paper, we present and discuss the basic data and preliminary results from the Hector Mine earthquake.

California↗

USGS2022

Ratification of Neogene subseries as formal units in international chronostratigraphy

The International Union of Geological Sciences Executive Committee (IUGS EC) voted on 13 October 2021 to ratify a proposal for the Neogene subseries/subepochs to have formal status. They are now incorporated into a sixtiered chronostratigraphic hierarchy within the International Chronostratigraphic Chart (ICC). The Lower/Early Miocene Subseries/Subepoch comprises the Aquitanian and Burdigalian stages/ages, the Middle Miocene Subseries/Subepoch comprises the Langhian and Serravallian stages/ages, the Upper/Late Miocene Subseries/Subepoch comprises the Tortonian and Messinian stages/ages, the Lower/Early Pliocene Subseries/Subepoch comprises the Zanclean Stage/Age and the Upper/Late Pliocene Subseries/Subepoch comprises the Piacenzian Stage/Age. This ratification is an important move towards both a common language in the wider Earth Sciences community and a step forward in the unification of Cenozoic chronostratigraphy, with Neogene and Quaternary subseries/subepochs now formalized.

Episodes↗