SEARCH · USGS Science

Results for “Map Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,513 records · Page 84Linked to original sources

USGS2008

Revised Geologic Map of the Fort Garland Quadrangle, Costilla County, Colorado

The map area includes Fort Garland, Colo., and the surrounding area, which is primarily rural. Fort Garland was established in 1858 to protect settlers in the San Luis Valley, then part of the Territory of New Mexico. East of the town are the Garland mesas (basalt-covered tablelands), which are uplifted as horsts with the Central Sangre de Cristo fault zone. The map also includes the northern part of the Culebra graben, a deep structural basin that extends from south of San Luis (as the Sanchez graben) to near Blanca, about 8 km west of Fort Garland. The oldest rocks exposed in the map area are early Proterozic basement rocks (granites in Ikes Creek block) that occupy an intermediate structural position between the strongly uplifted Blanca Peak block and the Culebra graben. The basement rocks are overlain by Oligocene volcanic and volcaniclastic rocks of unknown origin. The volcanic rocks were buried by a thick sequence of basin-fill deposits of the Santa Fe Group as the Rio Grande rift formed about 25 million years ago. The Servilleta Basalt, a regional series of 3.7?4.8 Ma old flood basalts, was deposited within sediment, and locally provides a basis for dividing the group into upper and lower parts. Landslide deposits and colluvium that rest on sediments of the Santa Fe Group cover the steep margins of the mesas. Exposures of the sediment beneath the basalt and within the low foothills east of the Central Sangre de Cristo fault zone are comprised of siltstones, sandstones, and minor fluvial conglomerates. Most of the low ground surrounding the mesas and in the graben is covered by surficial deposits of Quaternary age. The alluvial deposits are subdivided into three Pleistocene-age units and three Holocene-age units. The oldest Pleistocene gravel (unit Qao) is preserved as isolated remnants that cap high surfaces north and east of Fort Garland. The primary geologic hazards in the map area are from earthquakes, landslides, and localized flooding. The Central Sangre de Cristo fault zone shows evidence for latest Pleistocene to possible early Holocene movement. The landslides may have seismogenic origins; that is, they may be stimulated by strong ground shaking during large earthquakes. This revised geologic map is based on previous mapping by Wallace (1997) and new mapping, primarily of the Quaternary deposits, by Machette.

Scientific Investigations Map↗

USGS2015

U.S. Geological Survey science for the Wyoming Landscape Conservation Initiative—2014 annual report

This is the seventh report produced by the U.S. Geological Survey (USGS) for the Wyoming Landscape Conservation Initiative (WLCI) to detail annual activities conducted by the USGS for addressing specific management needs identified by WLCI partners. In FY2014, there were 26 projects, including a new one that was completed, two others that were also completed, and several that entered new phases or directions. The 26 projects fall into several categories: (1) synthesizing and analyzing existing data to identify current conditions on the landscape and using the data to develop models for projecting past and future landscape conditions; (2) monitoring indicators of ecosystem conditions and the effectiveness of on-the-ground habitat projects; (3) conducting research to elucidate the mechanisms underlying wildlife and habitat responses to changing land uses; (4) managing and making accessible the large number of databases, maps, and other products being developed; and (5) coordinating efforts among WLCI partners, helping them use USGS-developed decision-support tools, and integrating WLCI outcomes with future habitat enhancement and research projects. The new (completed) project was the development and publication of a public outreach piece for visitors of Fossil Butte National Monument. The final product was a USGS Fact Sheet that capitalized on previously collected elk-monitoring data to interpret the ecology of the Monument’s elk population and the importance of the Monument’s habitats to this highly visible wildlife species. One of the completed projects entailed developing and evaluating a synthetic approach to high-resolution satellite imagery for use in effectiveness monitoring, which culminated in a journal article. The other completed project was a coalescing of two similar tasks under data and information management that pertain to Web application development and the development of outreach and graphic products into a single integrated project that focuses on developing and maintaining/upgrading Web applications and other tools for visualizing, mapping, and using geospatial data. Major accomplishments for FY2014 included several publications, including Part B of an energy resources map that (with Part A) depicts coal, wind, oil, gas, oil shale, uranium, and solar energy production in the WLCI region. Two published works associated with sage-grouse included a Wildlife Monograph on prioritizing species’ habitats across large landscapes, multiple seasons, and novel areas (using sage-grouse in Wyoming as an example), and a USGS Data Series report that includes both the data used in the habitat-prioritization models and the habitat prioritization models developed for sage-grouse. Our Science Team also published a framework for conducting large, collaborative projects that rely on geospatial data, and a paper that describes the efficacy of fusing satellite data collected at various resolutions for measuring and monitoring vegetation changes. These products are all invaluable tools for maximizing the efficiency and effectiveness of managing species of concern, conducting future landscape-scale assessments, and monitoring status and trends of landscape conditions. Other highlights of FY2014 included a renewed effort to gather and analyze wildlife and habitat status and trend data for the WLCI Interagency Monitoring Database (IAMD) to assess long-term trends and cumulative effects associated with land-use and climate changes. Water-monitoring efforts included drilling four new groundwater-monitoring wells in the Green and New Fork River basins near the proposed Normally Pressured Lance Formation energy development, and continued data collection at established water-monitoring sites. Three additional wells were sampled as part of the Wyoming Groundwater Monitoring Network, bringing the total to 19 Network wells sampled in the WLCI region since 2010. Combined, these water-monitoring efforts can help to identify potential changes in water quality or levels that may result from land-use changes. Major terrestrial monitoring accomplishments included processing satellite imagery from 1985−2010 to develop a historical perspective of long-term vegetation changes, which can serve as a basis for monitoring current and future trends in sagebrush steppe. Such data are crucial tools for agencies tasked with sage-grouse management and conservation. The USGS WLCI Science Team also continued monitoring and testing methods for evaluating WLCI habitat treatments designed to promote aspen regeneration and enhance sage-grouse habitat, and to assess how those treatments influence invasive species distributions and ungulate herbivory. Highlights included analyzing field data collected to elucidate the relationships between sage-grouse habitat use and the proximity of energy infrastructure, and using new instruments to measure productivity responses of aspen woodlands to various factors. Numerous FY2014 accomplishments specifically addressed agency needs to manage and conserve Wyoming’s wildlife species of concern. A pygmy rabbit habitat model and Wyoming distribution map were completed to identify factors associated with rabbit habitat occupancy. Previous work on sage-grouse population dynamics was expanded to better understand the factors that drive long-term viability of sage-grouse populations and to develop a tool that helps to identify key factors limiting sage-grouse persistence in Wyoming. Field work and data analyses continued for elucidating the relationships between sagebrush songbird abundance and productivity, the intensity of energy development, and community dynamics of nest predators. For the mule deer study, mixed mountain shrublands important to migrating and wintering mule deer were mapped and delivered to WLCI partners. Additionally, the relationships between energy development and crucial winter habitat for mule deer were evaluated, and a new phase of work was implemented to better understand relationships between plant phenology and mule deer migration movements. Finally, initial analyses of data collected to evaluate fish-community composition in relation to habitat quality indicate that water quality, as measured by concentrations of hydrocarbons, water temperature, and others parameters, has been diminished in subwatersheds with higher levels of energy development. Overall, the outcomes and products of these wildlife studies contribute significantly to the information and tools needed for addressing effects of land-use changes on Wyoming’s species of concern. Finally, capabilities of the WLCI Web site and the USGS ScienceBase infrastructure were maintained and upgraded to help ensure access to and efficient use of all the WLCI data, products, assessment tools, and outreach materials that have been developed. Of particular note is the completion of three Web applications developed for mapping (1) the 1900−2008 progression of oil and gas development;(2) the predicted distributions of Wyoming’s Species of Greatest Conservation Need; and (3) the locations of coal and wind energy production, sage-grouse distribution and core management areas, and alternative routes for transmission lines within the WLCI region. Collectively, these applications tools provide WLCI planners and managers with powerful tools for better understanding the distributions of wildlife species and potential alternatives for energy development.

Wyoming↗

USGS2012

Fluvial transport and surface enrichment of arsenic in semi-arid mining regions: examples from the Mojave Desert, California

As a result of extensive gold and silver mining in the Mojave Desert, southern California, mine wastes and tailings containing highly elevated arsenic (As) concentrations remain exposed at a number of former mining sites. Decades of weathering and erosion have contributed to the mobilization of As-enriched tailings, which now contaminate surrounding communities. Fluvial transport plays an intermittent yet important and relatively undocumented role in the migration and dispersal of As-contaminated mine wastes in semi-arid climates. Assessing the contribution of fluvial systems to tailings mobilization is critical in order to assess the distribution and long-term exposure potential of tailings in a mining-impacted environment. Extensive sampling, chemical analysis, and geospatial mapping of dry streambed (wash) sediments, tailings piles, alluvial fans, and rainwater runoff at multiple mine sites have aided the development of a conceptual model to explain the fluvial migration of mine wastes in semi-arid climates. Intense and episodic precipitation events mobilize mine wastes downstream and downslope as a series of discrete pulses, causing dispersion both down and lateral to washes with exponential decay behavior as distance from the source increases. Accordingly a quantitative model of arsenic concentrations in wash sediments, represented as a series of overlapping exponential power-law decay curves, results in the acceptable reproducibility of observed arsenic concentration patterns. Such a model can be transferable to other abandoned mine lands as a predictive tool for monitoring the fate and transport of arsenic and related contaminants in similar settings. Effective remediation of contaminated mine wastes in a semi-arid environment requires addressing concurrent changes in the amounts of potential tailings released through fluvial processes and the transport capacity of a wash.

California↗

USGS2019

Communication strategy of the U.S. Geological Survey Hawaiian Volcano Observatory during the lava-flow crisis of 2014–2015, Kilauea Volcano, Hawaii

In 2014–2015, a slow-moving pāhoehoe lava flow from the remote Pu‘u ‘Ō‘ō vent on Kīlauea Volcano advanced 20 km into populated areas of the Puna District on the Island of Hawai‘i. The staff of the U.S. Geological Survey’s (USGS) Hawaiian Volcano Observatory (HVO) mobilized their resources to closely monitor the flow and provide up-to-date information to the Hawai‘i County Civil Defense (HCCD) agency, the public, and the news media. Scientists issued formal USGS notifications about the flow and Kīlauea’s two eruptions, prepared maps and annotated photographs, infrared images, and videos for dissemination online, and wrote weekly “Volcano Watch” articles for local newspapers. They also provided regular briefings for federal, state, and county agency representatives, answered questions during near-daily briefings with local and national media, and offered information through an established lecture series and participation in community emergency preparedness fairs. Noteworthy among the communication activities was a series of public meetings organized by the Hawai‘i County mayor’s office and led by the HCCD administrator. The meetings were a regular forum for many HVO scientists to talk directly and frequently with residents, business owners, elected officials, and other stakeholders about their concerns, the evolving status of the eruptions, and the uncertain prognosis of the flow’s advance and extent. The dialogue was essential for HVO staff to describe their observations and insights about the lava flow’s behavior and to gain credibility with the community during the crisis. This experience suggests that personal engagement with people at risk from future lava flows in Hawai‘i and elsewhere in the world will remain a crucial part of an eruption response, even with greater capability to disseminate warnings and information digitally via the Internet.

Hawaii↗

USGS2005

Remotely triggered earthquakes following moderate mainshocks (or, why California is not falling into the ocean)

On several occasions in recent memory California has experienced apparent clusters of earthquake activity that are too far apart to be considered related according to a classic taxonomy that includes foreshocks, mainshocks, and aftershocks. During a week-long period in July 1986, California experienced the M 6.0 North Palm Springs earthquake, the M 5.5 Oceanside earthquake, and a swarm of smaller events beneath San Diego Bay. The recent M 6.0 Parkfield earthquake was followed approximately 30 hours later by the M 5.0 Arvin event, which was located well outside the traditional aftershock zone for a M 6.0 mainshock. These periods of apparently heightened activity lead to understandable consternation among California residents, who wonder if activity will build further. The recent, memorably dramatic television mini-series, 10.5, was based on what might be considered an end-member doomsday scenario, culminating in a large part of California literally falling into the ocean. While the public did seem to recognize the gross liberties that were taken with science in this movie, old myths die hard, and seismicity maps showing activity in different parts the state are not reassuring. Neither is what used to be conventional wisdom on the part of the experts, that far-flung earthquakes are not related (even though this might remain a possibility).

California↗

USGS2009

EAARL Coastal Topography-Western Florida, Post-Hurricane Charley, 2004: First Surface

This DVD contains lidar-derived first-surface (FS) topography GIS datasets of a portion of the western Florida coastline beachface, acquired post-Hurricane Charley on August 16 and 18, 2004. Click on a tile number (1 - 68) to view the corresponding 1-meter-resolution images and links to each data directory. Click on the red tile in the index map to view the 3-meter-resolution mosaic and link to the corresponding directory.

Data Series↗

USGS2014

Archive of single-beam bathymetry data collected from select areas in Weeks Bay and Weeks Bayou, southwest Louisiana, January 2013

A team of scientists from the U.S. Geological Survey, St. Petersburg Coastal and Marine Science Center, collected 92 line-kilometers of dual-frequency single-beam bathymetry data in the tidal creeks, bayous, and coastal areas near Weeks Bay, southwest Louisiana. Limited bathymetry data exist for these tidally and meteorologically influenced shallow-water estuarine environments. In order to reduce the present knowledge gap, the objectives of this study were to (1) develop methods for regional inland bathymetry mapping and monitoring, (2) test inland bathymetry mapping system in pilot locations for integrating multiple elevation (aerial and terrestrial lidar) and bathymetry datasets, (3) implement inland bathymetry mapping and monitoring in highly focused sites, and (4) evaluate changes in bathymetry and channel-fill sediment storage using these methods. This report contains single-beam bathymetric data collected between January 14 and 18, 2013. Data were collected from the RV Mako (5-meter vessel) in water depths that ranged from <1 meter to 7.7 meters. Locations of data collection ranged from open-bay systems to narrow inland tidal creeks (U.S. Geological Survey Field Activity Number 13CCT01). This report serves as an archive of processed bathymetry data. Geographic information system data provided in this document include a 10-meter cell-size interpolated gridded bathymetry surface, and trackline maps. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata. Do not use these data for navigational purposes.

Louisiana↗

USGS2016

The geochemical atlas of Alaska, 2016

A rich legacy of geochemical data produced since the early 1960s covers the great expanse of Alaska; careful treatment of such data may provide significant and revealing geochemical maps that may be used for landscape geochemistry, mineral resource exploration, and geoenvironmental investigations over large areas. To maximize the spatial density and extent of data coverage for statewide mapping of element distributions, we compiled and integrated analyses of more than 175,000 sediment and soil samples from three major, separate sources: the U.S. Geological Survey, the National Uranium Resource Evaluation program, and the Alaska Division of Geological & Geophysical Surveys geochemical databases. Various types of heterogeneity and deficiencies in these data presented major challenges to our development of coherently integrated datasets for modeling and mapping of element distributions. Researchers from many different organizations and disparate scientific studies collected samples that were analyzed using highly variable methods throughout a time period of more than 50 years, during which many changes in analytical techniques were developed and applied. Despite these challenges, the U.S. Geological Survey has produced a new systematically integrated compilation of sediment and soil geochemical data with an average sample site density of approximately 1 locality per 10 square kilometers (km 2 ) for the entire State of Alaska, although density varies considerably among different areas. From that compilation, we have modeled and mapped the distributions of 68 elements, thus creating an updated geochemical atlas for the State.

Alaska↗

USGS2006

National Geomagnetism Program: Current Status & Five-Year Plan, 2006-2010

Executive Summary: The U.S. Geological Survey's Geomagnetism Program serves the scientific community and the broader public by collecting and distributing magnetometer data from an array of ground-based observatories and by conducting scientific analysis on those data. Preliminary, variational time-series can be collected and distributed in near-real time, while fully calibrated, absolute time-series are distributed after processing. The data are used by the civilian and military parts of the Federal Government, by private industry, and by academia, for a wide variety of purposes of both immediately practical importance and long-term scientific interest, including space-weather diagnosis and related hazard mitigation, mapping of the magnetic field and measurement of its activity, and research on the nature of the Earth's interior and the near-Earth space environment. This document reviews the current status of the Program, in terms of its situation within the Government and within the scientific community; summarizes the Program's operations, its staffing situation, and its facilities; describes the diversity of uses of Program magnetometer data; and presents a plan for the next 5 years for enhancing the Program's data-based services, developing products, and conducting scientific research.

Open-File Report↗

USGS2013

An exploration in mineral supply chain mapping using tantalum as an example

This report uses the supply chain of tantalum (Ta) to investigate the complexity of mineral and metal supply chains in general and show how they can be mapped. A supply chain is made up of all the manufacturers, suppliers, information networks, and so forth, that provide the materials and parts that go into making up a final product. The mineral portion of the supply chain begins with mineral material in the ground (the ore deposit); extends through a series of processes that include mining, beneficiation, processing (smelting and refining), semimanufacture, and manufacture; and continues through transformation of the mineral ore into concentrates, refined mineral commodities, intermediate forms (such as metals and alloys), component parts, and, finally, complex products. This study analyses the supply chain of tantalum beginning with minerals in the ground to many of the final goods that contain tantalum.

Open-File Report↗

USGS2014

Linkage of the Soil and Water Assessment Tool and the Texas Water Availability Model to simulate the effects of brush management on monthly storage of Canyon Lake, south-central Texas, 1995-2010

The U.S. Geological Survey (USGS), in cooperation with the Texas State Soil and Water Conservation Board, developed and applied an approach to create a linkage between the published upper Guadalupe River Soil Water Assessment Tool (SWAT) brush-management (ashe juniper [ Juniperus ashei ]) model and the full authorization version Guadalupe River Water Availability Model (WAM). The SWAT model was published by the USGS, and the Guadalupe River WAM is available from the Texas Commission on Environmental Quality. The upper Guadalupe River watershed is a substantial component of the Guadalupe River WAM. This report serves in part as documentation of a proof of concept on the feasibility of linking these two water-resources planning models for the purpose of simulating possible increases in water storage in Canyon Lake as a result of different brush-management scenarios. The SWAT-WAM linkage for the upper Guadalupe River is documented with a principal objective to evaluate the distributional characteristics of the monthly water storage of Canyon Lake during selected drought conditions. Focus is on the relative evaluation of select scenarios of large-scale or “extensive” brush management within the upper Guadalupe River watershed. There are six SWAT simulations for the upper Guadalupe River watershed that include a baseline (0-percent management of treatable ashe juniper, the baseline scenario from a previous study in which no percentage of ashe juniper is numerically replaced with grassland) along with five scenarios (extensions of SWAT simulations from a previous study) of 20-, 40-, 60-, 80-, and 100-percent random (numerical) replacement of treatable ashe juniper with grasslands throughout the upper Guadalupe River watershed in south-central Texas. SWAT is a process-based, semidistributed, water-balance model designed to predict the effects of landscape management decisions on water yields. A watershed is subdivided into subbasins, and each subbasin is associated with a single reach on the stream network. In general a WAM, such as the Guadalupe River WAM, provides analysis of generalized water rights in a river and reservoir framework. A WAM accommodates hydrology and water usage through several input files containing water rights, watershed parameters, and naturalized streamflow time series. A WAM is generalized for application to rivers and reservoir systems, and input datasets are uniquely developed for a river basin of concern. The extractions of SWAT output for the five extensive brush-management and baseline scenarios were offset by –21 years and, in general, the results were then mapped to the WAM input-flow file. The offset of –21 years was chosen arbitrarily for technical reasons and means that the period of monthly record 1995–2010 of the upper Guadalupe River SWAT became the synthetic period of monthly record 1974–89, hereinafter 1974–89 (synthetic) period, of the Guadalupe River WAM. The relative (between scenario to baseline) effects of extensive brush-management scenarios by using the SWAT-WAM linkage were evaluated, and two critical intermediate results were total inflow to Canyon Lake from 1995 to 2010 and the monthly storage of Canyon Lake from 1974 to 1989 (synthetic). The first quartile or lower 25th percentile of monthly storage of Canyon Lake for the baseline scenario is 381,000 acre-feet (acre-ft) for the hereinafter 1974–89 (synthetic) period. This lower quartile was chosen for analysis for two critical purposes. First, Canyon Lake is managed with a conservation pool of about 386,200 acre-ft capacity (as recognized by the WAM) and is at or near conservation capacity about 50 percent or more of the time; further, there is intrinsic data censoring that occurs for the monthly storage distribution because Canyon Lake is at or near conservation pool elevation the majority of the time. This intrinsic censoring has the effect of creating a bounded distribution with a left or low-volume tail. Statistical assessment of the brush-management scenarios beginning with the 381,000 acre-ft censoring threshold provides readily interpretable results. Second, the quantification of brush management during periods lacking abundant rainfall, which were defined in this study as months for which Canyon Lake storage was below the 25th percentile for the simulation period, are of substantial interest to water-resource managers and stakeholders in the context of water-supply enhancement. A statistical assessment of the SWAT-WAM linkage for the low-volume tail of the distribution of monthly storage of Canyon Lake is the focus of analysis and interpretation. Drought periods for the analysis are defined as the months (consecutive or not) during which Canyon Lake is below the 25th percentile of storage (381,000 acre-ft) for the baseline scenario. Such months are referred to as being within the “Drought Quartile.” The Drought Quartile is a conceptual and heuristically determined waypoint for the analysis and is not related to any administrative definition of drought by stakeholders or policy makers. The five scenarios and the baseline scenario simulated in the upper Guadalupe River SWAT were all passed through the Guadalupe River WAM by the SWAT-WAM linkage described in this report. A comparison of the mean increase per month in reservoir storage for Canyon Lake conditioned for the Drought Quartile was made. For each of the five brush-management and baseline scenarios, the months with storage below 381,000 acre-ft were extracted. The mean monthly storages during the Drought Quartile were computed for each of the five scenarios and the baseline scenario. The mean of the baseline scenario was 376,458 acre-ft and subsequently was subtracted from the mean monthly storage during the Drought Quartile for each of the five scenarios. The mean monthly offset storages of Canyon Lake during the Drought Quartile were 110 acre-ft (20 percent); 448 acre-ft (40 percent); 754 acre-ft (60 percent); 1,080 acre-ft (80 percent); and 1,090 acre-ft (100 percent). A particular mean was interpreted as follows: the value of 754 acre-ft for the 60-percent brush-management scenario implies that, on average, this scenario indicates an additional 754 acre-ft per month of storage in Canyon Lake relative to the baseline during the Drought Quartile. All of the five scenarios resulted in an increase on average to water supply relative to the baseline scenario during the Drought Quartile through the SWAT-WAM linkage.

Texas↗

USGS1987

Hydrology and water quality of East Lake Tohopekaliga, Osceola County, Florida

East Lake Tohopekaliga, one of the major lakes in central Florida, is located in the upper Kissimmee River basin in north-east Osceola County. It is one of numerous lakes in the upper basin used for flood control, in addition to recreation and some irrigation of surrounding pasture. This report is the fourth in a series of lake reconnaissance studies in the Kissimmee River basin prepared in cooperation with the South Florida Water Management District. The purpose of the report is to provide government agencies and the public with a brief summary of the lake 's hydrology and water quality. Site information is given and includes map number, site name, location, and type of data available (specific conductivity, pH, alkalinity, turbidity, color, dissolved oxygen, hardness, dissolved chlorides, dissolved sodium, dissolved calcium, dissolved magnesium, dissolved potassium, nitrogen, ammonia, nitrates, carbon and phosphorus). The U.S. Geological Survey (USGS) maintained a lake stage gaging station on East Lake Tohopekaliga from 1942 to 1968. The South Florida Water Management District has recorded lake stage since 1963. Periodic water quality samples have been collected from the lake by the South Florida Water Management District and USGS. Water quality and discharge data have been collected for one major tributary to the lake, Boggy Creek. Although few groundwater data are available for the study area, results of previous studies of the groundwater resources of Osceola County are included in this report. To supplement the water quality data for East Lake Tohopekaliga, water samples were collected at selected sites in November 1982 (dry season) and in August 1983 (rainy season). Samples were taken at inflow points, and in the lake, and vertical profiles of dissolved oxygen and temperature were measured in the lake. A water budget from an EPA report on the lake is also included. (Lantz-PTT)

Water-Resources Investigations Report↗

USGS1997

Initial results of high-resolution sea-floor mapping offshore of the New York - New Jersey metropolitan area using sidescan sonar

High-resolution seismic, sidescan-sonar, multibeam bathymetry, and sediment sampling techniques were used to map the surficial geology and shallow subbottom stratigraphy of a segment of the inner shelf and nearshore region of New York-New Jersey metropolitan area. Preliminary analyses of these data provide a sedimentologic framework for addressing a wide range of science and management issues. Principal features identified include: 1) a series of sharply defined, rippled scour depressions in the nearshore areas of Long Island and New Jersey that are thought to be an erosional pattern indicative of storm-induced cross-shelf sediment-transport processes from the shoreface; 2) outcropping Upper Cretaceous to early Tertiary coastal plain strata and associated gravelly lag deposits; 3 ) morphologic and chemical indications of anthropogenic waste disposal and redistribution; 4) extensive deposits of medium- to fine-grained sand northeast and east of the Hudson Shelf Valley; 5) acoustic backscatter patterns on the sidescan imagery and sediment bedforms that indicate a general south-southwest sediment transport direction toward the Hudson Shelf Valley; and 6) the Hudson Shelf Valley is a depositional site for silty sediment and acts as a conduit for cross-shelf pollutant transport.

Northeastern Geology and Environmental Sciences↗

USGS1999

Cobalt-rich ferromanganese crusts in the Pacific

Co-rich Fe-Mn crusts occur throughout the Pacific on seamounts, ridges, and plateaus where currents have kept the rocks swept clean of sediments at least intermittently for millions of years. Crusts precipitate out of cold ambient sea water onto hard-rock substrates forming pavements up to 250 mm thick. Crusts are important as a potential resource for Co, Ni, Pt, Mn, Tl, Te, and other metals, as well as for the paleoclimate signals stored in their stratigraphic layers. Crusts form at water depths of about 400 to 4000 m, with the thickest and most Co-rich crusts occurring at depths of about 800 to 2500 m, which may vary on a regional scale. Gravity processes, sediment cover, submerged and emergent reefs, and currents control the distribution and thickness of crusts on seamounts. Crusts occur on a variety of substrate rocks that generally decrease in the order, breccia, basalt, phosphorite, limestone, hyaloclastite, and mudstone. Because of this wide variety of substrate types, crusts are difficult to distinguish from the substrate using remotely sensed data, such as geophysical measurements, but are generally weaker and lighter-weight than the substrate. Crusts can be distinguished from the substrates, however, by their much higher gamma radiation levels. The mean dry bulk density of crusts is 1.3 g/cm3, the mean porosity is 60%, and the mean surface area is extremely high, 300 m2/g. Crusts generally grow at rates of 1 to 10 mm/Ma. Crust surfaces are botryoidal, which may be modified to a variety of forms by current erosion. In cross-section, crusts are generally layered, with individual layers displaying massive, botryoidal, laminated, columnar, or mottled textures. Characteristic layering is persistent regionally in the Pacific. Crusts are composed of ferruginous vernadite (δ-MnO2) and X-ray amorphous Fe oxyhydroxide, with moderate amounts of carbonate fluorapatite (CFA) in thick crusts and minor amounts of quartz and feldspar in most crusts. Elements most commonly associated with the vernadite phase include Mn, Co, Ni, Cd, and Mo, whereas those most commonly associated with Fe oxyhydroxide are Fe and As. Detrital phases are represented by Si, Al, K, Ti, Cr, Mg, Fe, and Na; the CFA phase by Ca, P, Sr, Y, and CO2; and a residual biogenic phase by Ba, Sr, Ce, Cu, V, Ca, and Mg. Crusts contain Co contents up to about 2.3%, Ni to 1%, and Pt to 3 ppm, with mean Fe/Mn ratios of 0.6 to 1.3. Fe/Mn decreases, whereas Co, Ni, Ti, and Pt increase in central Pacific crusts and Fe/Mn, Si, and Al increase in continental margin crusts and in crusts with proximity to west Pacific volcanic arcs. Vernadite and CFA-related elements decrease, whereas Fe, Cu, and detrital-related elements increase with increasing water depth of crust occurrence. Cobalt, Ce, Tl, and maybe also Ti, Pb, and Pt are strongly concentrated in crusts over other metals because of oxidation reactions. Total rare earth elements (REEs) commonly vary between 0.1% and 0.3% and are derived from sea water along with other hydrogenetic elements, Co, Mn, Ni, etc. Platinum, Rh, Ir, and some Ru in crusts are also derived from sea water, whereas Pd and the remainder of the Ru derive from detrital minerals. The older parts of thick crusts were phosphatized during at least two global phosphogenic events during the Tertiary, which mobilized and redistributed elements in those parts of the crusts. 240Silicon, Fe, Al, Th, Ti, Co, Mn, Pb, and U are commonly depleted, whereas Ni, Cu, Zn, Y, REEs, Sr, and Pt are commonly enriched in phosphatized layers compared to younger nonphosphatized layers. The dominant controls on the concentration of elements in crusts include the concentration of metals in sea water and their ratios, colloid surface charge, types of complexing agents, surface area, and growth rates. Crusts act as closed systems with regard to the isotopic ratios of Be, Nd, Pb, Hf, Os, and U-series, which in part have been used to date crusts and in part used as isotopic tracers of paleoceanographic and paleoclimatic conditions. Those tracers are especially useful in delineating temporal changes in deep-ocean circulation. Research and development on the technology of mining crusts are only in their infancy. Detailed maps of crust deposits and a better understanding of small-scale seamount topography are required to design the most appropriate mining equipment.

Book chapter↗

USGS2011

Summary of November 2010 meeting to evaluate turbidite data for constraining the recurrence parameters of great Cascadia earthquakes for the update of national seismic hazard maps

This report summarizes a meeting of geologists, marine sedimentologists, geophysicists, and seismologists that was held on November 18–19, 2010 at Oregon State University in Corvallis, Oregon. The overall goal of the meeting was to evaluate observations of turbidite deposits to provide constraints on the recurrence time and rupture extent of great Cascadia subduction zone (CSZ) earthquakes for the next update of the U.S. national seismic hazard maps (NSHM). The meeting was convened at Oregon State University because this is the major center for collecting and evaluating turbidite evidence of great Cascadia earthquakes by Chris Goldfinger and his colleagues. We especially wanted the participants to see some of the numerous deep sea cores this group has collected that contain the turbidite deposits. Great earthquakes on the CSZ pose a major tsunami, ground-shaking, and ground-failure hazard to the Pacific Northwest. Figure 1 shows a map of the Pacific Northwest with a model for the rupture zone of a moment magnitude M w 9.0 earthquake on the CSZ and the ground shaking intensity (in ShakeMap format) expected from such an earthquake, based on empirical ground-motion prediction equations. The damaging effects of such an earthquake would occur over a wide swath of the Pacific Northwest and an accompanying tsunami would likely cause devastation along the Pacifc Northwest coast and possibly cause damage and loss of life in other areas of the Pacific. A magnitude 8 earthquake on the CSZ would cause damaging ground shaking and ground failure over a substantial area and could also generate a destructive tsunami. The recent tragic occurrence of the 2011 M w 9.0 Tohoku-Oki, Japan, earthquake highlights the importance of having accurate estimates of the recurrence times and magnitudes of great earthquakes on subduction zones. For the U.S. national seismic hazard maps, estimating the hazard from the Cascadia subduction zone has been based on coastal paleoseismic evidence of great earthquakes over the past 5,000 years. The instrumental catalog of earthquakes is of little use for constraining the hazard of the CSZ, because there are virtually no recorded earthquakes on most of the plate interface of the CSZ. There are no historical accounts in the past 150 years of large earthquakes on most of the CSZ. Until about 20 years ago, some interpreted this lack of recent and historical earthquakes as an indicator that the subduction zone was slipping aseismically and could not produce a great earthquake. The work of Brian Atwater and others, in the late 1980s and the 1990s (Atwater, 1987, 1992; Atwater and others, 1995; Nelson and others, 1996; Clague, 1997; Atwater and Hemphill-Haley, 1997; Atwater and others, 2004) demonstrated that submerged forests, buried soils, tsunami deposits, and liquefaction along and near the coast were compelling evidence of repeated great Cascadia earthquakes over at least the past 5,000 years. Atwater and Hemphill-Haley (1997) concluded from paleoseismic evidence at Willapa Bay, Washington, that great earthquakes ruptured the CSZ with an average recurrence time of about 500 years. The date of the last great CSZ earthquake, January 26, 1700, was established from historical records of the so-called orphan tsunami in Japan that is inferred to have been produced by this earthquake (Satake and others, 1996, 2003; Atwater and others, 2005) and is consistent with tree-ring data from drowned forests in Washington and Oregon. From modeling the observations of the tsunami, Satake and others (2003) estimated a moment magnitude of about 9.0 for this earthquake. Many other paleoseismic sites have been investigated along the Pacific Northwest coast from Vancouver Island to northern California and show evidence of great CSZ earthquakes. Nelson and others (2006) summarized the dates found from these studies and proposed correlations between sites indicating the extent of rupture for individual events. Dating of inferred tsunami deposits in Bradley Lake, Oregon by Kelsey and others (2005), as well as tsunami and subsidence evidence from Six Rivers, Oregon (Kelsey and others, 2002) and Coquille River (Witter and others, 2003), indicates that there were probably M w 8 ruptures in the southern portion of the CSZ in addition to the M w 9 events that rupture the whole length of the CSZ (Nelson and others, 2006). A parallel development over the past 20 years or more is the use of deep-sea turbidite deposits for identifying and dating great Cascadia earthquakes over the past 10,000 years (Adams, 1990; Goldfinger and others, 2003, 2008, in press; Goldfinger, 2011). Turbidites are sediment deposits in the deep ocean from turbidity currents, which are energetic flows of sediment and water along the continental shelf and slope. Adams (1990), using the counts of turbidites in deep-sea cores off the coast of Oregon and Washington collected and analyzed by Griggs (1969) and Griggs and others (1969), proposed that these turbidites were caused by the shaking of great Cascadia earthquakes. Part of his reasoning was that the number (13) of turbidite deposits that occurred since deposition of the Mazama Ash 7,000 years ago gave a recurrence time of about 500 years, consistent with that derived from the coastal submergence data. Adams (1990) also proposed the “confluence test” which evaluates the number of turbidites for submarine channels that form a confluence. He reported that the number of turbidites in the single downstream channel equaled the number in each of the tributary channels. He reasoned that this indicated that the turbidites in each tributary were simultaneously triggered and were, therefore, caused by a common forcing agent. He concluded that shaking from extended ruptures of great Cascadia earthquakes was the most likely cause of these turbidites. Based on the paleoseismic evidence of past great earthquakes, the hazard from the Cascadia subduction zone was included in the 1996 U.S. NSHM (Frankel and others, 1996), which were the basis for seismic provisions in the 2000 International Building Code. These hazard maps used the paleoseismic studies to constrain the recurrence rate of great CSZ earthquakes. Goldfinger and his colleagues have since collected many more deep ocean cores and done extensive analysis on the turbidite deposits that they identified in the cores (Goldfinger and others, 2003, 2008, in press; Goldfinger, 2011). Using their dating of the sediments and correlation of features in the logs of density and magnetic susceptibility between cores, they developed a detailed chronology of great earthquakes along the CSZ for the past 10,000 years (Goldfinger and others, in press). These correlations consist of attempting to match the peaks and valleys in logs of density and magnetic susceptibility between cores separated, in some cases, by hundreds of kilometers. Based on this work, Goldfinger and others (2003, 2008, in press) proposed that the turbidite evidence indicated the occurrence of great earthquakes (M w 8) that only ruptured the southern portion of the CSZ, as well as earthquakes with about M w 9 that ruptured the entire length of the CSZ. For the southernmost portion of the CSZ, Goldfinger and others (in press) proposed a recurrence time of M w 8 or larger earthquakes of about 230 years. This proposed recurrence time was shorter than the 500 year time that was incorporated in one scenario in the NSHM’s. It is important to note that the hazard maps of 1996 and later also included a scenario or set of scenarios with a shorter recurrence time for M w 8 earthquakes, using rupture zones that are distributed along the length of the CSZ (Frankel and others, 1996; Petersen and others, 2008). Originally, this scenario was meant to correspond to the idea that some of the 500-year averaged ruptures seen in the paleoseismic evidence could have been a series of M w 8 earthquakes that occurred over a short period of time (a few decades), rather than M w 9 earthquakes. Figure 2 shows the logic tree for the CSZ used in the 2008 NSHM’s (Petersen and others, 2008). This logic tree includes whole CSZ rupture earthquakes (M w 8.8–9.2) and partial CSZ rupture earthquakes (M w 8.0–8.7). In this latest version of the NSHM’s, the effective recurrence time of earthquakes on the CSZ with moment magnitudes greater than or equal to 8.0 over the various models is about 270 years (Petersen and others, 2008). This recurrence time applies to the entire CSZ, so that the hazard from great earthquakes was approximately equal along the whole zone, although the hazard estimates taper on the northern and southern ends of the CSZ, because of the way rupture zones of M w 8 earthquakes were distributed along the strike of the CSZ. The NSHM will be updated in 2013, as part of the standard update cycle that corresponds to the update cycle of the national model building codes that are based on the seismic hazard maps. A meeting was necessary to assemble a wide group of experts to hear Dr. Goldfinger explain his methodology for dating and correlating the turbidites and for developing the earthquake chronology. The overall goal of the workshop was to evaluate observations of turbidite deposits to provide constraints on the recurrence times and rupture extents of great Cascadia subduction zone earthquakes for the next update of the NSHM. Before the meeting, participants were supplied with the U.S. Geological Survey (USGS) Professional Paper of Goldfinger and others (in press), as well as material from Brian Atwater and Alan Nelson. The agenda of the meeting was developed by Art Frankel, with assistance from Chris Goldfinger, Brian Atwater, Alan Nelson, Mark Petersen, and Craig Weaver. The meeting was hosted by Chris Goldfinger of Oregon State University. We stress that it is difficult to evaluate in a two-day meeting the large amount of work that Goldfinger and his colleagues have done over the past 15 years or more. This meeting is the first step in a process that develops the inputs to the update of the national maps. The conclusions of this workshop will be discussed and possibly modified at the regional Pacific Northwest workshop for the hazard maps to be held in early 2012. Vetting new research results using informed expert opinion is an integral part of updating the national maps and does not reflect on the veracity of these results.

Cascadia↗

USGS2016

Exploiting differential vegetation phenology for satellite-based mapping of semiarid grass vegetation in the southwestern United States and northern Mexico

We developed and evaluated a methodology for subpixel discrimination and large-area mapping of the perennial warm-season (C 4 ) grass component of vegetation cover in mixed-composition landscapes of the southwestern United States and northern Mexico. We describe the methodology within a general, conceptual framework that we identify as the differential vegetation phenology (DVP) paradigm. We introduce a DVP index, the Normalized Difference Phenometric Index (NDPI) that provides vegetation type-specific information at the subpixel scale by exploiting differential patterns of vegetation phenology detectable in time-series spectral vegetation index (VI) data from multispectral land imagers. We used modified soil-adjusted vegetation index (MSAVI 2 ) data from Landsat to develop the NDPI, and MSAVI 2 data from MODIS to compare its performance relative to one alternate DVP metric (difference of spring average MSAVI 2 and summer maximum MSAVI 2 ), and two simple, conventional VI metrics (summer average MSAVI 2 , summer maximum MSAVI 2 ). The NDPI in a scaled form (NDPI s ) performed best in predicting variation in perennial C 4 grass cover as estimated from landscape photographs at 92 sites (R 2 = 0.76, p < 0.001), indicating improvement over the alternate DVP metric (R 2 = 0.73, p < 0.001) and substantial improvement over the two conventional VI metrics (R 2 = 0.62 and 0.56, p < 0.001). The results suggest DVP-based methods, and the NDPI in particular, can be effective for subpixel discrimination and mapping of exposed perennial C 4 grass cover within mixed-composition landscapes of the Southwest, and potentially for monitoring of its response to drought, climate change, grazing and other factors, including land management. With appropriate adjustments, the method could potentially be used for subpixel discrimination and mapping of grass or other vegetation types in other regions where the vegetation components of the landscape exhibit contrasting seasonal patterns of phenology.

Arizona↗

USGS2008

Moderate Resolution Imaging Spectroradiometer (MODIS) Overview

The Moderate Resolution Imaging Spectroradiometer (MODIS) is an instrument that collects remotely sensed data used by scientists for monitoring, modeling, and assessing the effects of natural processes and human actions on the Earth's surface. The continual calibration of the MODIS instruments, the refinement of algorithms used to create higher-level products, and the ongoing product validation make MODIS images a valuable time series (2000-present) of geophysical and biophysical land-surface measurements. Carried on two National Aeronautics and Space Administration (NASA) Earth Observing System (EOS) satellites, MODIS acquires morning (EOS-Terra) and afternoon (EOS-Aqua) views almost daily. Terra data acquisitions began in February 2000 and Aqua data acquisitions began in July 2002. Land data are generated only as higher-level products, removing the burden of common types of data processing from the user community. MODIS-based products describing ecological dynamics, radiation budget, and land cover are projected onto a sinusoidal mapping grid and distributed as 10- by 10-degree tiles at 250-, 500-, or 1,000-meter spatial resolution. Some products are also created on a 0.05-degree geographic grid to support climate modeling studies. All MODIS products are distributed in the Hierarchical Data Format-Earth Observing System (HDF-EOS) file format and are available through file transfer protocol (FTP) or on digital video disc (DVD) media. Versions 4 and 5 of MODIS land data products are currently available and represent 'validated' collections defined in stages of accuracy that are based on the number of field sites and time periods for which the products have been validated. Version 5 collections incorporate the longest time series of both Terra and Aqua MODIS data products.

Fact Sheet↗

USGS1998

Coalbed methane resource potential and current prospects in Pennsylvania

Coalbed methane gas content analyses from exploratory coal cores and existing data indicate that gas content generally increases with increasing depth and rank. The coal beds studied are from the Main Bituminous field of Pennsylvania (which currently contains 24 coalbed methane pools) and the Northern and Southern Anthracite coal fields. They range from the Middle Pennsylvanian Allegheny Group to the Late Pennsylvanian-Early Permian Dunkard Group. Previous US Bureau of Mines studies revealed gas contents from 0.4 to 13.8 cm3/g at depths of 99 to 432 m for the bituminous coal beds of the Allegheny Group. More recent core data from the Allegheny Group yielded gas contents from 2.2 to 8.9 cm3/g at depths from 167 to 387 m. In the Anthracite region of eastern Pennsylvania, the little data that are available show that gas content is anomalously high or low. Gas yields from test holes in eastern Pennsylvania are low with or without artificial stimulation mainly due to the lack of a good cleat system. Overall estimates of coalbed methane resources indicate there may be 1.7 Tm3 (61 Tcf) of gas-in-place contained in the Northern Appalachian coal basin. The amount of technically recoverable coalbed methane resources is projected by the US Geological Survey National Oil and Gas Resource Assessment Team [US Geological Survey National Oil and Gas Resource Assessment Team, 1996. 1995 National assessment of United States oil and gas resources-results, methodology, and supporting data, US Geological Survey Digital Data Series DDS-30, CD-ROM, Denver, CO, 80 pp.] and Lyons [Lyons, P.C., 1997. Central-northern Appalachian coalbed methane flow grows. Oil and Gas Journal 95 (27) 76-79] at 0.3 Tm3 (11.48 Tcf). This includes portions of Pennsylvania, Ohio, West Virginia, and a small part of Maryland. Consequently, a mapping investigation was conducted to evaluate the regional geology of the bituminous coal-bearing intervals in southwestern Pennsylvania and its influence on coalbed methane potential. Phase I of this study involved the entire Pennsylvanian coal-bearing interval of southwestern Pennsylvania. Phase II focused on a stratigraphic delineation and evaluation of Allegheny Group coal beds and associated sandstones. Several prospective coal beds and associated facies relationships with channel-fill sandstones were determined. Possible non-coal scenarios for coalbed methane include erosional contacts between coal beds and overlying channel-fill sandstones and areas of stacked channel-fill sandstones. Repetitive sequences of coal accumulation are stacked, commonly with shale interburden, and are also potential coalbed methane targets. Additional Pennsylvania Geological Survey drilling/coalbed methane sampling occurred in Armstrong, Beaver, Cambria, Greene, Lawrence, Somerset, and Washington Counties. Raw coalbed methane desorption data tables/graphical displays of gas contents versus depth, thickness, and time, and average composition and heating values from coal beds of the Allegheny Group to the Dunkard Group are available at the Pennsylvania Geological Survey. Further information on cross-sections, isopleth maps, isopach maps, raw drillhole data, and ownership issues can also be obtained from the same source.A mapping of the regional geology of the bituminous coal-bearing intervals in southwestern Pennsylvania reveal several prospective coal beds and associated facies relationships with channel-fill sandstones. Possible non-coal scenarios for coalbed methane include erosional contacts between coalbeds and overlying channel-fill sandstones and areas of stacked channel-fill sandstones. Repetitive sequences of coal accumulation are stacked, commonly with shale interburden. and are also potential coalbed methane targets.

International Journal of Coal Geology↗