USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Applied Volcanology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 84Linked to original sources
USGS2026

Regional variations in sea ice and primary productivity in the Bering Sea during Marine Isotope Stage 11

Marine Isotope Stage (MIS) 11 (424-374 ka) has long been an analog for Holocene climate, because it is the most recent interglacial period with similar orbital conditions. However, there is significant global and regional variability in the climate response to MIS 11 warmth. Here, we review sediment core records from across the Bering Sea to investigate changes in paleoceanographic conditions during Marine Isotope Stages 12-10. Sea ice was present over much of the Bering Sea during MIS 11, but today, none of the sites investigated are ever ice-covered. This suggests that sea ice regimes in the Bering Sea during MIS 11 were different to those of the Holocene. There are also regional differences in the response of sea ice to MIS 11 warming. At the Umnak Plateau, Southeastern Bering Sea, sea ice concentrations decline during deglaciation, but they remain high at the slope sites until Peak MIS 11. Sea ice re-advances over the Umnak Plateau during peak interglacial warmth, at the same time that it declines over the slope sites. Late MIS 11 is characterized by high concentrations of seasonal sea ice at the Umnak Plateau, whilst sea ice at the slope sites fluctuates between consolidated and unconsolidated ice cover. This east-west dichotomy may be explained by changes in the behavior of the Aleutian Low. Productivity increases dramatically during deglaciation due to increased upwelling and sea level rise bringing fresh nutrients into the oceans. This is characterized by increased diatom productivity, increased terrestrial carbon deposition, and laminations at all sites.

Alaska↗
USGS2026

Monitoring changes in Landsat thermal features in urban and non-urban interfaces from 1986 to 2023 in two international urban centers: Implications for climate and global issues

Rapid urbanization is reshaping thermal environments worldwide, with the strongest impacts occurring at the interface between urban and non-urban areas. Impervious surfaces, as key indicators of urban expansion, are critical for monitoring urban growth and assessing surface urban heat island (SUHI) effects. Land use and land cover change (LULCC) provides an essential link between urban dynamics and their environmental and societal consequences. Here, we integrated the U.S. Geological Survey (USGS) Climate Global Issues (CGI) Land Cover Product with Landsat thermal time-series to investigate SUHI evolution in two contrasting metropolitan regions: Wuhan, China, and Brasília, Brazil. Using data spanning 1986–2023, we analyzed the relationships between land cover, Landsat-based land surface temperature (LST), and SUHI intensity, and identified persistent thermal hotspots. Results demonstrate that the land cover data utilized increases the accuracy of impervious surface mapping along urban–rural gradients. Average SUHI intensities were 3.4 °C in Wuhan and 3.3 °C in Brasília, with statistically significant warming trends of 0.04 °C/year and 0.01 °C/year, respectively. Maximum temperature proved to be a robust indicator of SUHI intensification, capturing long-term upward trends. Our findings highlight the important role of urban land cover dynamics in shaping temporal SUHI variability and hotspot emergence. This prototype framework demonstrates the scientific and policy value of combining long-term land cover monitoring information with satellite thermal monitoring to quantify and track SUHI at city scale, supporting sustainable urban planning and climate adaptation strategies.

Remote Sensing↗
USGS2024

Advancing sustainable groundwater management with a hydro-economic system model: Investigations in the Harney Basin, Oregon

Groundwater resources frequently trend toward unsustainable levels because, absent effective institutions, individual water users generally act independently without considering the impacts on other users. Hydro-economic models (HEMs) of human-natural systems can play a positive role toward successful groundwater management by yielding valuable knowledge and insight. The current study explores how an HEM that captures essential physical and economic characteristics of a system can shed light on the system's processes and dynamics to benefit stakeholders, managers, and also researchers. These propositions are illustrated using the Harney Basin, Oregon, which has seen large groundwater declines in the past 20 years. The HEM shows that: (a) although current groundwater pumping rates will gradually raise costs and reduce well yields, irrigators gain the highest aggregate economic return by continuing current pumping; (b) lowland areas of the basin are hydrologically connected, which limits the efficacy of remedies focused on regulations only in some portions of the basin; (c) community expectations regarding the efficacy of several proposed solutions are overly optimistic; and (d) the study's scenarios identify interventions that would stabilize the groundwater system and prevent additional adverse impacts on residential and livestock wells and groundwater-dependent ecosystems. These interventions would require limiting groundwater pumping by nearly half and reducing annual profits by $7.5–$9.0M. The HEM also demonstrated its value to researchers: its insights shifted attention toward questions about Oregon's existing groundwater institutions and their inability to adaptively manage the transition from abundant groundwater to scarce groundwater in a timely manner.

Oregon↗
USGS2025

Cancer risk and estimated lithium exposure in drinking groundwater in the US

Importance Lithium is a naturally occurring element in drinking water and is commonly used as a mood-stabilizing medication. Although clinical studies have reported associations between receiving lithium treatment and reduced cancer risk among patients with bipolar disorder, to our knowledge, the association between environmental lithium exposure and cancer risk has never been studied in the general population. Objectives To evaluate the association between exposure to lithium in drinking groundwater and cancer risk in the general population. Design, Setting, and Participants This cohort study included participants with electronic health record and residential address information but without cancer history at baseline from the All of Us Research Program between May 31, 2017, and June 30, 2022. Participants were followed up until February 15, 2023. Statistical analysis was performed from September 2023 through October 2024. Exposure Lithium concentration in groundwater, based on kriging interpolation of publicly available US Geological Survey data on lithium concentration for 4700 wells across the contiguous US between May 12, 1999, and November 6, 2018. Main Outcome and Measures The main outcome was cancer diagnosis or condition, obtained from electronic health records. Stratified Cox proportional hazards regression models were used to estimate the hazard ratios (HRs) and 95% CIs for risk of cancer overall and individual cancer types for increasing quintiles of the estimated lithium exposure in drinking groundwater, adjusting for socioeconomic, behavioral, and neighborhood-level variables. The analysis was further conducted in the western and eastern halves of the US and restricted to long-term residents living at their current address for at least 3 years. Results A total of 252 178 participants were included (median age, 52 years [IQR, 36-64 years]; 60.1% female). The median follow-up time was 3.6 years (IQR, 3.0-4.3 years), and 7573 incident cancer cases were identified. Higher estimated lithium exposure was consistently associated with reduced cancer risk. Compared with the first (lowest) quintile of lithium exposure, the HR for all cancers was 0.49 (95% CI, 0.31-0.78) for the fourth quintile and 0.29 (95% CI, 0.15-0.55) for the fifth quintile. These associations were found for all cancer types investigated in both females and males, among long-term residents, and in both western and eastern states. For example, for the fifth vs first quintile of lithium exposure for all cancers, the HR was 0.17 (95% CI, 0.07-0.42) in females and 0.13 (95% CI, 0.04-0.38) in males; for long-term residents, the HR was 0.32 (95% CI, 0.15-0.66) in females and 0.24 (95% CI, 0.11-0.52) in males; and the HR was 0.01 (95% CI, 0.00-0.09) in western states and 0.34 (95% CI, 0.21-0.57) in eastern states. Conclusions and Relevance In this cohort study of 252 178 participants, estimated lithium exposure in drinking groundwater was associated with reduced cancer risk. Given the sparse evidence and unknown mechanisms of this association, follow-up investigation is warranted.

contiguous United States↗
USGS2026

USGS Geochron Database

Introduction Geochronology helps us understand Earth’s history by determining when important events, like volcanic eruptions, the rise of mountains, the formation of mineral resources, and changes in the landscape, happened. Geochronological data directly support geologic mapping and can inform decisions about geologic hazard mitigation, natural resource management, and infrastructure resilience. The U.S. Geological Survey (USGS) Geochron database provides access to more than 300,000 published, publicly available age measurements from more than 40,000 geological samples. This database is the result of a collaborative effort with State geological surveys and geoscientists from across the globe. The USGS Geochron database is the most comprehensive collection of geochronological data available for the United States. Users can view data through an interactive map explorer, download datasets, and integrate data into geospatial software or other analysis tools.

Fact Sheet↗
USGS2024

Effective site coefficients for the 2024 International Building Code (IBC)

The U.S. National Seismic Hazard Models (NSHMs), developed by the U.S. Geological Survey (USGS), have long been the scientific foundation of seismic design guidelines and have been used to compute design ground motions for construction of new buildings and retrofit of existing buildings in the United States and its territories. The 2018 NSHM is adopted by the 2024 International Building Code (IBC). Prior to the 2018 NSHM update, hazard calculations were required only at one reference site condition defined by V S30 =760 m/s (where V S30 is the time-averaged shear wave velocity from the surface to a depth of 30 m) and three periods (peak ground acceleration, PGA, and pseudo spectral accelerations at periods of 0.2 and 1 s, S s and S 1 ). Site coefficients, F PGA , F a , and F v , were then defined by the Building Seismic Safety Council (BSSC) Provisions Update Committee (PUC) in the site-specific procedures of National Earthquake Hazard Reduction Program (NEHRP) Recommended Seismic Provisions to calculate ground motions for other site classes with different V S30 values at the given periods. The design ground motions at other periods were then estimated using a generic spectral shape that was also defined by the BSSC PUC in NEHRP provisions. In recent years, the engineering community has realized there were deficiencies with the F a and F v site coefficients and the generic spectral shape. To avoid potentially dangerous underestimations of design ground motions for long period structures on soft site conditions in high seismicity regions, the BSSC PUC recommended the use of multi-period response spectra (MPRS) in 2017. As a result, the USGS produced multi-period and multi-V S30 response spectral values in the 2018 NSHM for calculations of design ground motions and the site coefficients F a and F v were eliminated from the 2020 NEHRP Provisions. As these site coefficients were widely used inside and outside of the United States, in this study we back-calculate the “effective” site coefficients F a,eff , and F v,eff by comparing MPRS for various site classes with the MPRS for the reference site condition, and discuss the changes that are observed in the 2024 IBC compared to its previous version in 2021. The effective site coefficients are presented for test site locations and their dependence on various factors including period, ground motion intensity, and regional models are discussed. Ratio maps between the new effective site coefficients and the old ones are then presented for soft site classes and for short and long periods. For soft site classes at short periods, the new effective site coefficients are lower than the old site coefficients for high seismicity regions and higher for low seismicity regions. As it was expected, for soft site classes at long periods and high seismicity regions, the new effective site coefficients are much larger than the old site coefficients without imposing the 50% increase as a penalty that was suggested in the 2021 IBC, whereas they could be much smaller if the 50% increase would have been imposed particularly around New Madrid and Charleston high seismicity regions. For low seismicity regions, the long period effective site coefficients can be smaller or larger by 20% compared to the 2021 IBC coefficients.

Conference Paper↗
USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗
USGS2025

Paleoproterozoic vein graphite mineralization caused by decarbonation in the Ruby Range, Montana, USA

Hydrothermal graphite veins are a possible source for modern battery materials and require better understanding of their carbon source(s) and absolute timing to develop mapable criteria for exploration models. We present new observations of graphite vein and alteration paragenesis and U-Pb LA-ICP-MS titanite age data from the Ruby prospect, Montana, USA, that constrain mineralization timing and source. The graphite veins cut high-temperature metamorphic rocks of the lower Christensen Range suite and are associated with intense diopside (Di0.69Hd0.27Jo0.04) alteration of marble. The oldest titanite ages in fresh marble and partially altered calc-silicate gneiss are ca. 2,500 – 2,450 Ma, show elevated REE values, and Eu/Eu* <1.5, consistent with growth during early regional metamorphism. Titanite in diopside-graphite alteration, interpreted as part of the hydrothermal vein-forming episode, cluster around 1,750 Ma, are characterized by lower REE values, and show Eu/Eu* >2; suggesting a low fO 2 fluid generated from metamorphism during the Big Sky orogeny. Our paragenetic observations and titanite ages indicate graphite vein formation via skarnoid decarbonation reactions in marble late in regional orogenesis. Granulite-facies, carbonate-bearing, supracrustal rock terranes are thus favorable for hydrothermal graphite vein deposits.

Montana↗
USGS2025

Metal-rich lacustrine sediments from legacy mining perpetuate copper exposure to aquatic-riparian food webs

Historic copper mining left a legacy of metal-rich tailings resulting in ecological impacts along and within Torch Lake, an area of concern in the Keweenaw Peninsula, Michigan, USA. Given the toxicity of copper to invertebrates, this study assessed the influence of this legacy on present day nearshore aquatic and terrestrial ecosystems. We measured the metal (Co, Cu, Ni, Zn, Cd) and metalloid (As) concentrations in sediment, pore water, surface water, larval and adult insects, and two riparian spider taxa collected from Torch Lake and a nearby reference lake. Overall, elevated metal and metalloid concentrations, particularly Cu, were measured in all sediment samples and some surface and pore water samples collected from Torch Lake. For instance, Cu concentrations in the Torch Lake sediment were ∼200% higher than the reference lake and all measured concentrations exceeded predicted effects concentrations by at least ninefold. Within larval insect tissues, we observed 160% higher Cu concentrations than measured in the reference lake, and Cu was the only measured element above predicted effects concentrations in Torch Lake. Adult insects collected at both lakes had similar metal concentrations irrespective of exposure levels. Yet we found 100% higher copper concentrations in Torch Lake riparian spiders, demonstrating elevated exposure risk to insectivores across the aquatic-terrestrial boundary. Our results highlight that other metals in the mixture may not be as concerning to adjacent riparian ecosystems, but copper remains a contaminant of concern in Torch Lake 60 years after mining ceased.

Michigan↗
USGS2025

U.S. Geological Survey geomagnetic variometer data: Capitalizing on seismic infrastructure

The U.S. Geological Survey’s Geomagnetism Program is collaborating with the Earthquake Hazards Program and Global Seismographic Network Program to densify magnetic field observations. This collaboration focuses on the installation of magnetometers, or magnetic variometers, at existing seismic stations. Along with improving the density of space weather observations for hazard monitoring, these data can be used to correct colocated magnetic field induced noise in seismic data. Such corrections are especially useful during time periods of large magnetic storms where the magnetic field‐induced instrument noise can be of similar amplitude to earthquake ground‐motion records.

contiguous United States↗
USGS2026

Deformed submarine terraces in Puget Sound, Pacific Northwest, indicate only one M >~7.5 earthquake on the Seattle fault zone in the past 11,000 yr

Submerged marine terraces in Puget Sound, deformed across the Seattle fault zone (SFZ), indicate that only one earthquake as large as M~7.5 has occurred in at least the past 11 kyr. Previous paleoseismic studies document a M~7.5 earthquake between 923–4 CE, which uplifted coastal marine terraces by as much as 8 m. We demonstrate that this earthquake was the only such event since ~11 ka by mapping and quantifying deformation of older marine terraces, now submerged in Puget Sound. The submerged terraces, attributed to a late-glacial sea-level lowstand, record both glacial isostatic rebound and tectonic deformation. Vertical offset of the ~11 ka terraces within the SFZ is comparable to that of the marine terraces uplifted in 923 CE, implying no additional large (M>~7.5) earthquake on the SFZ since ~11 ka. This result implies a longer recurrence interval than current hazard estimates, which assumes recurrence of M>7.1 events every 5 kyr. Our mapping of SFZ deformation since ~11 ka also supports fault segmentation and contiguous block uplift between the Seattle and Tacoma fault zones.

Washington↗
USGS2025

Fingerprinting magmatic REE deposit sources with zircon petrochronology

Carbonatites and associated alkaline silicate rocks are of considerable economic interest due to their enrichments in rare earth elements. The petrogenesis and source(s) of these complexes, however, are poorly understood. Models propose either mantle plume-derived carbon-rich melts or a mantle source enriched by subduction-related metasomatism. We use zircon trace elements to fingerprint carbonatite-alkaline complex sources, focusing on the economically significant 1.4 Ga Mountain Pass intrusive suite (MPIS). Autocrystic zircon from MPIS alkaline silicate rocks are enriched in Th and U relative to Nb suggesting a subduction influenced, oxidized source region. Lower Sc/Yb, higher Ti concentrations, and the absence of Eu anomalies in autocrystic zircon suggest derivation from a less hydrous, hotter, and deeper mantle source relative to arc-related 1.8–1.6 Ga inherited zircon. These data are best explained by syn- to post-collisional Mesoproterozoic reactivation of a subduction-metasomatized mantle source. The source and tectonic setting of the MPIS contrasts with Mesoproterozoic Gifford Creek and Bayan Obo carbonatites which exhibit plume-like compositions and are associated with rifts, suggesting different sources and tectonic settings for these economically significant deposits. We demonstrate that zircon petrochronology is a robust method for distinguishing carbonatite sources and can inform more targeted exploration strategies for critical mineral resources.

Conference Paper↗
USGS2025

Aftershocks in stress shadows are inconsistent with modeled static Coulomb stress changes

Aftershock triggering is commonly attributed to increases in static Coulomb stress. In some areas, termed "stress shadows", a decrease in Coulomb stress is predicted to suppress earthquake occurrence. However, aftershocks are often observed in the modeled stress shadows. We examine several hypotheses that attempt to reconcile these shadow aftershocks with the static Coulomb stress change model: (1) they appear to be in shadows because of inaccuracy in the stress change calculations, (2) they occur on faults of unusual orientation which actually experienced increased Coulomb stress, (3) they occur on faults with different frictional properties, not modeled well by Coulomb stress, and (4) they are secondary aftershocks triggered by prior aftershocks or afterslip. When tested on the 2016 Mw7.0 Kumamoto, Japan, and 2019 Mw7.1 Ridgecrest, California, aftershock sequences, none of these hypotheses can explain the majority of the shadow aftershocks, and taken together these hypotheses can explain only about half of these aftershocks. This implies that Coulomb stress modeling that lacks small-scale fault zone heterogeneity might be inadequate to fully capture the true static stress changes and/or that other physical triggering models are needed, for example transient processes such as delayed triggering by dynamic stress changes from the passing seismic waves.

California↗
USGS2025

Quantifying groundwater response and uncertainty in beaver-influenced mountainous floodplains using machine learning-based model calibration

Beavers ( Castor canadensis ) alter river corridor hydrology by creating ponds and inundating floodplains, and thereby improving surface water storage. However, the impact of inundation on groundwater, particularly in mountainous alluvial floodplains with permeable gravel/cobble layers overlain by a soil layer, remains uncertain. Numerical modeling across various floodplain structures considers topographic and sediment complexity and multidirectional flow, linking inundation to groundwater response. This study develops a model-data integration workflow to address uncertainty in groundwater response to beaver-induced inundations in a mountainous alluvial floodplain in the Upper Colorado River Basin. Uncertain factors include seasonal hydrologic dynamics, hydraulic conductivities, floodplain structures, and meteorological forcings. We employed an ensemble of groundwater models, based on geophysical and hydrologic data, with machine learning-based calibration using a neural density estimator. This allowed us to quantify the vertical flux from the soil layer to the permeable gravel bed, the down-valley underflow within the gravel bed, and their ratios. Results show a significant increase in the vertical flux relative to down-valley underflow, from 2% during dry pond periods to 20% during wet periods, serving as an analogy for conditions without and with beaver ponds. The study highlights the influence of floodplain structure on groundwater storage, water balance, and water quality impacted by beaver ponds. A thick gravel bed layer, with a large down-valley underflow, minimizes the effect of beaver-induced inundation on water quality. We emphasize the need for field-scale measurements of floodplain structure and improved characterization of evapotranspiration changes to reduce uncertainty in groundwater response.

Colorado↗
USGS2025

Disparate groundwater responses to wildfire

Post-wildfire investigations of groundwater response reveal a range of outcomes, varying from substantial increases to notable decreases in recharge and baseflow, with some studies indicating negligible or short-lived effects. This review assesses these varied responses within five critical categories: climate, vegetation, hydrogeology, fire characteristics, and the cryosphere, examining both short-term (within 2 years) and intermediate (2–10 years post-fire) effects. Despite considerable variability, some consistent patterns emerge. For instance, in hydroclimatic settings where water input and evaporative demand cycles are out of sync, post-wildfire groundwater responses tend to be positive (i.e., increased flux or storage), whereas under low fire severity conditions or in vegetation types that quickly recover, groundwater responses tend to be negative (i.e., decreased flux or storage). We synthesize relevant findings into a compendium of testable hypotheses aimed at explaining the spatiotemporal variability in observed post-wildfire groundwater responses. A recurring theme is the critical influence of the pre-wildfire groundwater regime on expected response and recovery. We identify opportunities for specific improvements in post-wildfire monitoring and modeling that would further advance capabilities to predict groundwater response. A key area for further research is understanding how wildfire effects on snow dynamics and other cryospheric processes translate to changes in groundwater.

WIREs Water↗
USGS2025

Beyond optimality: Dryland ecosystems infrequently use water efficiently for carbon gain

Optimality theory assumes plants maximize carbon gain per unit water lost and is often implemented to scale leaf-level carbon gain and water use to regional and global scales. Optimality theory is often mathematically represented by assuming plant water-use efficiency (WUE) scales with VPD k , where k = ½ represents expected optimal behavior. It is unclear, however, if this relationship holds in arid and semi-arid ecosystems that are strongly impacted by soil and atmospheric moisture status. We used data from seven flux tower sites along an aridity gradient in New Mexico to answer: how does the relationship between WUE and VPD compare to expectations based on optimality theory? To address this question, we integrated the Dynamic Evapotranspiration Partitioning Approach for Rapid Timescales with a stochastic antecedent model to estimate ecosystem-level WUE (GPP/T) and the net sensitivity of WUE to VPD, or k Dynamic , which we compare to the theoretical optimal sensitivity of k = ½. Our results show that optimality theory is not always appropriate, and k Dynamic often deviates from ½, especially at some of the more arid sites or during periods of low soil moisture. At less arid, higher elevation sites, k Dynamic is most consistent with optimality theory at moderate VPD levels, but not at high VPD. In general, the sensitivity of WUE to VPD is highly variable such that k Dynamic exhibits notable daily and seasonal variability, suggesting highly dynamic stomatal behavior. These results emphasize that representing plant water-use strategies as dynamic in time and space is critical to improving large-scale estimates of plant water use.

New Mexico↗
USGS2024

Uncertainty and spatial correlation in station measurements for mb magnitude estimation

The body‐wave magnitude (⁠⁠) is a long‐standing network‐averaged, amplitude‐based magnitude used to estimate the magnitude of seismic sources from teleseismic observations. The U.S. Geological Survey National Earthquake Information Center (NEIC) relies on in its global real‐time earthquake monitoring mission. Although waveform modeling‐based moment magnitudes are the modern standard to characterize earthquake size, is important because (1) in many cases, waveform modeling is not possible (e.g., low signal‐to‐noise events), (2) is applicable over a broad range of magnitudes, ∼M 4–7, and (3) there is a many decades‐long history of estimating magnitudes. We use the NEIC Preliminary Determination of Epicenters earthquake catalog to investigate the uncertainty in NEIC station measurements. We show that measurements are spatially correlated, which can bias event ⁠, and we describe an empirical relation between this spatial correlation and station‐to‐station distance. We further describe an approach to mitigate bias from the spatial correlation. Accounting for the spatial covariance of observations can change the event from −0.15 to 0.07 units (10th to 90th percentile) for smaller events (⁠⁠). These smaller events have the largest standard deviations ranging from 0.05 to 0.15 units (10th to 90th percentile).

The Seismic Record↗