USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Analytical and Applied Pyrolysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,688 records · Page 84Linked to original sources
USGS2024

On algorithmically determined versus traditional macroseismic intensity assignments

The utility of macroseismic data, defined as the effects of earthquakes on humans and the built environment, has been increasingly recognized following the advent of online systems that now produce unprecedented volumes of macroseismic intensity information. Contributed reports from the U.S. Geological Survey “Did You Feel It?” (DYFI) system ( Wald et al ., 1999 ) are used to generate intensity values with an algorithm based on seminal work by Dengler and Dewey (1998) . The algorithm was developed initially to reproduce intensity values assigned by expert opinion using questionnaire results collected by telephone survey. In this article, I discuss reasons why intensity values from (self‐selected) DYFI responses can differ from values that would be assigned by expert opinion given more complete data from randomly selected participants. For example, with the data used by Dengler and Dewey (1998) , intensities near 4 could be determined from the percentage of people who felt shaking in each town. With less spatially rich data from self‐selected participants, this percentage often cannot be determined reliably. Audible noises are key additional diagnostic criteria for modified Mercalli intensity (MMI) 4, but, although the DYFI system includes a question about noise, following Dengler and Dewey (1998) , the DYFI algorithm does not include a noise indicator. At the upper end of the scale, as defined the DYFI algorithm yields a maximum intensity value of 9.05, nominally corresponding to peak ground acceleration of 75% g . These and other factors can result in DYFI values that are low compared to traditional MMI values assigned using expert opinion, even absent factors that can bias traditional MMI assignments. Modern ground‐motion intensity conversion equations determined using DYFI intensities are expected to be appropriate for DYFI intensities, but the results of this study suggest that biases may be introduced if DYFI and traditional intensities are assumed to be interchangeable.

Seismological Research Letters↗
USGS2025

Evaluation of daily stream temperature predictions (1979-2021) across the contiguous United States using a spatiotemporal aware machine learning algorithm

Stream temperature controls a variety of physical and biological processes that affect ecosystems, human health, and economic activities. We used 42 years (1979–2021) of data to predict daily summary statistics of stream temperature across >50,000 stream reaches in the contiguous United States using a recurrent graph convolution network. We comprehensively documented the performance – both across all reaches and by stream type (e.g., reservoir or groundwater influence) – as a baseline for future improvement. The model showed reach-level RMSE of <2 °C with 90 % prediction intervals that contain 90.7 % of observations. We also assessed how the model captured variability in ecologically relevant metrics (e.g., R 2 for annual 7-day maximum = 0.76; R 2 for days exceeding 25 °C = 0.75). This model does not outperform state-of-the-art machine learning efforts (e.g., RMSE ≤1.5 °C) due to a limited input set but does provide the most spatially complete modeling to date to support water availability assessments.

contiguous United States↗
USGS2025

2023 Earthquake Ground-Motion Workshop for the Central and Eastern United States, with a focus on the Gulf and Atlantic Coastal Plains—Agenda and abstracts

The U.S. Geological Survey held a virtual workshop December 7–8, 2023, to share research and ideas about earthquake ground motions in the Central and Eastern United States, with a focus on the Atlantic and Gulf Coastal Plains. The workshop was organized to learn about potential regionalization of ground-motion characteristics (source, path, and site), consider new explanatory variables for site response, and hear and discuss updates on ground-motion research on the Atlantic and Gulf Coastal Plains. The workshop was organized into a series of contributed presentations and three panel discussions held during 2 days. This report documents the agenda, contributed abstracts, and panel summaries.

Scientific Investigations Report↗
USGS2026

Modeling future groundwater depletion to evaluate sustainability goals set under the Sustainable Groundwater Management Act in the critically overdrafted basins of the Central Valley, California, USA (2020–2070)

In 2014, California's Sustainable Groundwater Management Act (SGMA) mandated local agencies to devise and implement groundwater sustainability plans to address critically overdrafted conditions throughout the state's aquifers. However, the feasibility of these agencies' sustainability goals has not previously been assessed through a regional-scale, integrative lens. Here, we develop and analyze a novel, basin-wide database of 936 sustainability indicator wells located within Central Valley subbasins designated as critically overdrafted, most of which lie in the San Joaquin Valley. Our database shows 2040 groundwater elevation goals vary widely from 60 m above to 80 m below 2020 levels, with variability within and between adjacent subbasins. To evaluate the feasibility of achieving these goals, we coupled the database with a regional hydrologic model (Central Valley Hydrologic Model version 2) and simulated multiple future pumping scenarios. Results show that under increased groundwater demand, 60%–70% of indicator wells may fail to meet their 2040 goals. Even a 50% reduction from 2020 demand levels leaves nearly 40% of wells failing to meet their sustainability thresholds by 2040. Baseline models show that by 2070, up to 70% of wells could fail to meet their goals due to large-scale, spatially connected regions of groundwater depletion. This integrated framework, linking the first region-wide compilation of SGMA indicator wells with a regional groundwater model, demonstrates that many local sustainability goals may be unattainable with substantial (up to 50%) reductions in pumping. Additional management interventions, such as expanded recharge or coordinated demand reductions, may help achieve sustainability goals.

California↗
USGS2025

Groundwater response to managed aquifer recharge at the Southeast Houghton Artificial Recharge Project in Tucson, Arizona

Managed aquifer recharge is a widespread practice for storing water in the subsurface as groundwater. At a managed aquifer recharge facility in southern Arizona, groundwater-level and repeat microgravity data were collected to monitor aquifer response. These data were used to inform parameter identification for an unsaturated-zone flow model used to simulate the recharge process. The facility, the Southeast Houghton Artificial Recharge Project (SHARP), consists of 3 surface basins (about 27,600 square meters [6.8 acres] total surface area) where recycled water is distributed in recharge cycles lasting several months, with dry periods in between. During the study period, December 2020–December 2022, Tucson Water (the City of Tucson’s water utility) reported 6.56×10 6 cubic meters of water (5,320 acre-feet) recharged. Monitoring included groundwater-level observations at 3 monitoring wells and repeat microgravity measurements at as many as 22 locations (some stations were destroyed between surveys). Six gravity surveys were carried out using absolute- and relative-gravity meters. Large gravity increases, more than 250 microgals, were observed during the first repeat survey, 3.5 months after the start of recharge, but only in the immediate vicinity of the recharge basins. Data show that water moved downward to the water table, and storage changes in the unsaturated zone away from the facility were likely minimal. Gravity decreased at stations more than 1 kilometer from the facility, consistent with regional groundwater-level changes. Groundwater-level increases in wells adjacent to the recharge basins began 2 months after the second repeat gravity survey, and 5.5 months after recharge began. Unsaturated-zone flow modeling was carried out using software that simulates water movement and parameter estimation. Model calibration was carried out by minimizing an objective function calculated from the differences between simulated and observed groundwater levels, and between simulated and observed repeat microgravity data. Including repeat microgravity data in the objective function reduced the uncertainty in estimated parameter values for saturated hydraulic conductivity and saturated water content. Modeling indicated that the unsaturated zone between the recharge basins and the water table does not become saturated even after 685 days of simulated infiltration. This gradual wetting may account for increasing infiltration rates over time, as hydraulic conductivity increases with increasing water content. Unsaturated-zone water content decreased rapidly between recharge cycles. Model-simulated groundwater mounding extended about 1 kilometer from the center of SHARP after the 685-day period following the onset of recharge.

Arizona↗
USGS2026

Compact seismicity bursts have different characteristics from regional seismicity

Earthquakes tend to cluster, developing into sequences driven by stress perturbations and transient fault-zone processes. Depending on the driving process, earthquake sequences show differing behaviors. This variability challenges our ability to observe or distinguish these driving processes in high resolution. Here we systematically identify seismicity bursts throughout southern California using new statistical methods and examine their causes with other independent geophysical observations. Seismicity bursts are defined as statistically significant seismicity rate anomalies. Our approach has the advantage of being data driven, depending on few earthquake occurrence assumptions. We find abundant seismicity bursts across southern California, most frequently occurring along the San Jacinto Fault and in the Salton Sea and Coso geothermal fields. These seismicity bursts are highly compact in space and time, often encompassed by a 5 km radius and have durations less than 10 hr. Many of the seismicity bursts have their largest earthquake near the beginning of the sequence, but the largest earthquake is usually not an obvious mainshock. We utilize a variety of independent geophysical data sets to analyze the characteristics of the seismicity bursts, finding that the seismicity bursts have low b-values, low spectral stress drops, and varied stress ratios compared to regional seismicity. These differences suggest that seismicity bursts are driven by transient processes acting frequently across fault networks.

California↗
USGS2026

USGS Geochron Database

Introduction Geochronology helps us understand Earth’s history by determining when important events, like volcanic eruptions, the rise of mountains, the formation of mineral resources, and changes in the landscape, happened. Geochronological data directly support geologic mapping and can inform decisions about geologic hazard mitigation, natural resource management, and infrastructure resilience. The U.S. Geological Survey (USGS) Geochron database provides access to more than 300,000 published, publicly available age measurements from more than 40,000 geological samples. This database is the result of a collaborative effort with State geological surveys and geoscientists from across the globe. The USGS Geochron database is the most comprehensive collection of geochronological data available for the United States. Users can view data through an interactive map explorer, download datasets, and integrate data into geospatial software or other analysis tools.

Fact Sheet↗
USGS2026

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗
USGS2024

Automated, near real-time ground-motion processing at the U.S. Geological Survey

We describe automated ground‐motion processing software named gmprocess that has been developed at the U.S. Geological Survey (USGS) in support of near‐real‐time earthquake hazard products. Because of the open‐source development process, this software has benefitted from the involvement and contributions of a broad community and has been used for a wider range of applications than was initially envisioned. Here, we give an overview and introduction to the software, including how it has leveraged other open‐source libraries. We highlight some key features that gmprocess provides, compare response spectra calculated with the automated processing approach of gmprocess to the response spectra provided by the Next Generation Attenuation projects, and summarize projects that have utilized gmprocess. These use‐cases demonstrate that this software development effort has been successfully leveraged in earthquake research activities both within and outside the USGS.

Seismological Research Letters↗
USGS2025

Bølling-Allerød productivity in the subarctic Pacific driven by seasonal upwelling

The Bølling-Allerød deglacial event is marked by high diatom productivity and opal deposition throughout the subarctic Pacific. This opal could either constitute a strengthened biological pump and thus carbon sequestration, or a weakened biological pump and release of marine-sequestered CO 2 to the atmosphere. We quantify silicic acid supply at IODP Site U1340 in the Bering Sea using biogenic opal and δ 30 Si of Coscinodiscus , a diatom genus. These records, along with diatom environmental indicators, suggest the Bølling-Allerød had high silicic acid availability related to a shift from stratification to seasonal upwelling dynamics. We thus propose the primary cause of the high productivity event was increased macronutrient supply from vertical exchange that injected old, nutrient-rich, CO 2 -rich waters into the surface. Enhanced CO 2 release from the subarctic Pacific may help explain critical intervals of CO 2 rise that occur at the onsets of the Bølling-Allerød and PreBoreal.

Geophysical Research Letters↗
USGS2025

Estimating earthquake source depth using teleseismic broadband waveform modeling at the USGS National Earthquake Information Center

The U.S. Geologic Survey National Earthquake Information Center (NEIC) monitors global seismicity, producing a catalog of earthquake source parameters in near-real-time to provide information that can help mitigate the societal impact of earthquakes. The NEIC commonly relies on teleseismic observations to constrain earthquake source parameters (e.g., location, depth, magnitude, and mechanism) due to a lack of local and regional observations. For these ‘teleseismic’ events, depth phase (i.e., pP , sP ) arrival time observations provide the best estimate on source depth. However, depth phases are often difficult to accurately identify and/or pick. Therefore, NEIC relies on waveform modeling, such as those determined from W-phase ( M ww ), body wave ( M wb ), and regional ( M wr ) moment tensor estimations, to provide constraints on source depth. While depth estimates from these approaches are informative, higher frequency observations provide more precise estimates because depth phases are more prominently observed at higher frequencies. Here, we present NEIC’s relatively high-frequency (~0.04 to 1 Hz) teleseismic waveform modeling approach, termed Synthetic Depth Phase Modeling (SynDepth), for determining source depth. SynDepth was developed to provide NEIC with a tool that enables rapid, accurate, and quantifiable estimates of earthquake source depth in cases where locator depths are not reliable. This relatively simple and fast procedure searches over 1 km-incremented source depths and an expanding triangular source-time function to find the best-fitting solution. We compare automatic SynDepth solutions for a dataset of 1,216 earthquakes (M5.5-M7.6) between 2017 and 2021 to NEIC-derived depth estimates from other methods. Our approach provides a robust depth estimate for earthquakes lacking local arrival time data, and it minimizes the need for analyst review of depth-phase picks ( pP , sP ) or using predefined ‘fixed’ depths.

Seismological Research Letters↗
USGS2025

Critical Minerals in Ores (CMiO) database

Critical minerals are commodities essential to modern industrial and strategic technologies and are highly vulnerable to supply chain disruption. The Critical Minerals Mapping Initiative (CMMI) is a collaboration among the U.S. Geological Survey (USGS), the Geological Survey of Canada, and Geoscience Australia that aims to deepen global understanding of where critical minerals are located. A key output of this initiative is the Critical Minerals in Ores (CMiO) database that is advancing our collective understanding of critical minerals distributions. For instance, publicly available data on the concentrations of many critical minerals are sparse because these commodities can only be produced in small, yet essential, quantities compared to the primary commodities like copper and zinc. The CMiO database helps bridge this gap by offering high-quality, multielement geochemical data from a wide variety of critical mineral-bearing deposits around the world. Importantly, it uses a novel consensus deposit environment, group, and type classification scheme developed by the agencies that allows comparisons among ore deposits from different regions. The CMiO database contains geochemical data for more than 20,000 samples from more than 100 deposit types comprising 10 deposit environments.

Fact Sheet↗
USGS2025

Observations of tear-drinking by lepidopterans on moose ( Alces alces americana ) in northeastern North America

Lepidoptera have long been known to feed on the tears of vertebrates as a presumed source of minerals or nutrients. While this unusual behavior has been observed in a variety of species, only a single previous record has been documented outside of the tropics. Here, we present the first documentation of moths visiting the eyes of a bull moose ( Alces americanus americanus ), captured via trail camera in Green Mountain National Forest, Vermont, United States. We discuss the biogeography of this behavior, how it may differ between tropical and temperate climates, and its potential impact on moose health.

Vermont↗
USGS2026

Importance of fish in the diet of Adélie penguins across multiple life stages

Over recent decades, the Adélie penguin ( Pygoscelis adeliae ) population has grown across most of its range, the exception being the northern coast of the western Antarctic Peninsula (WAP). In the Ross Sea, the very large Cape Crozier colony grew to reach ~9% of the global population. Demographic factors driving the Cape Crozier trend have yet to be identified. However, low chick fledging mass - a negative influence in the northern WAP where the diet is mostly less-energy-dense krill - is not showing an effect in the Cape Crozier colony. Previously, we hypothesized that Cape Crozier fledglings, and post-breeding adults, must be finding sufficient higher-quality prey once free of the prey-depleted colony foraging area, with subsequent higher survival. Here we explore penguin diet within and outside the colony foraging area using stable isotope analysis (SIA) of feathers: those grown by post-breeding adults outside the foraging area, prior to moult, compared to those of near-fledged chicks raised on meals obtained within the foraging area. Second, we explore whether a major difference occurs between breeding and post-breeding diet of adults from a small, nearby colony (Cape Royds) that exploits a smaller, little-depleted preyscape. Finally, we compare the results to SIA analyses published by others to explore whether the pre-moult diet of Ross Island adults, mostly foraging within the north-eastern Ross Sea, compares with that of adults nesting in the southern WAP (Bellingshausen Sea coast). At the latter, populations are not decreasing, with diet containing an appreciable contribution of fish. The results confirmed that fish contributed greatly to chick diets at both Ross Island colonies (δ 15 N 10.6–11.4). Once adults were released from central-place foraging, SIA levels (δ 15 N 9.7–12.9) were similar to those of the southern WAP. Foraging on energy-dense fish in coastal Antarctic waters could be one reason Adélie penguins are among the most abundant and therefore most ecologically successful penguin species.

Antarctic Science↗
USGS2026

Corundum discovered by SuperCam and the Perseverance rover at Jezero crater, Mars

Mars is primarily composed of mafic mineral assemblages and their alteration products, but small, scattered rocks strewn across the landscape offer clues to greater petrological diversity. While traversing the Jezero crater rim, the Perseverance rover encountered several plagioclase-rich light-toned float rocks. SuperCam identified the distinctive signature of corundum (α-Al 2 O 3 ) in these rocks using time-resolved luminescence spectroscopy. Two strong peaks (692.7 and 694.1 nm) with millisecond lifetimes, and additional supporting lines, are consistent with Cr 3+ substitution for Al 3+ in corundum. Corundum forms in Al-rich, Si-depleted environments through magmatic or metamorphic processes. Given the rocks' small size, association with plagioclase, and location on the crater rim, we interpret the most plausible formation scenario to be impact induced metamorphism at the interface of a felsic and a mafic/ultramafic member with the likely action of fluids at some stage, although other possibilities are not excluded.

Geophysical Research Letters↗
USGS2025

Rare earth elements on the Moon

Rare earth elements (REEs) are a scarce but vital resource for our modern economies and lifestyles. Since the late 1990s, China has supplied the vast majority of the world’s refined REEs. Increasing global demand has broadened the search for REE deposits to unconventional places, including the Moon. Although most lunar rocks have very low REE concentrations, Apollo samples showed that one type of lunar rock containing potassium (K), REEs, and phosphorus (P)—known by the acronym KREEP—has high concentrations of REEs. Data from orbiting satellites have identified locations where substantial deposits of KREEP are likely. The viability of mining these deposits depends on the evolution of REE economics, the development of the Earth-Moon infrastructure, and the findings from future lunar mineral exploration missions.

Fact Sheet↗
USGS2025

2024 Surprise Inlet landslides: Insights from a prototype landslide‐triggered tsunami monitoring system in Prince William Sound, Alaska

Alaska's coastal communities face growing landslide hazards owing to glacier retreat and extreme weather intensified by the warming climate, yet hazard monitoring remains challenging. As part of ongoing experimental monitoring in Prince William Sound, we detected three large landslides (0.5–2.3 M m 3 ) at Surprise Inlet on 20 September 2024, within the span of an hour. These events were identified in near real-time through seismic data and later confirmed using satellite imagery, tidal records, and infrasound. The landslides generated a modest tsunami, and a 4 cm wave was recorded by a tide gauge 18 km away, marking the first recorded landslide to reach water since monitoring began in this region in 2021. Here, we examine the detection and interpretation of these landslides using multiple data sources and modeling. We demonstrate the effectiveness of this regional seismic monitoring system and show how complementary instrumentation, where available, can enhance detection capabilities.

Alaska↗
USGS2024

Groundwater flow model for the Des Moines River alluvial aquifer near Des Moines, Iowa

Des Moines Water Works (DMWW) is a regional municipal water utility that provides residential and commercial water resources to about 600,000 customers in Des Moines, Iowa, and surrounding municipalities in central Iowa. DMWW has identified a need for increased water supply and is exploring the potential for expanding groundwater production capabilities in the Des Moines River alluvial aquifer, where it operates two radial collector wells (RCWs). The U.S. Geological Survey, in cooperation with DMWW, completed a study of the Des Moines River alluvial aquifer and interactions of the RCWs with the aquifer; no previously published model has included the existing well locations, which is the focus of this model. A conceptual and numerical groundwater flow model have been developed to characterize the Des Moines River alluvial aquifer under existing conditions, to simulate water levels observed in the RCWs, and to provide publicly accessible hydrologic data and research that advance understanding of the regional hydrologic system and can potentially be used in the future to evaluate groundwater production scenarios. Model performance was assessed by comparing observed and simulated groundwater levels that included water level elevations, water level changes, water level inequality observations, surface water streamflow, and change in surface water volume from upstream to downstream. Water table elevation in the aquifer layers is on average slightly overestimated with average absolute value error less than 1.5 meters at both RCWs and less than 2.5 meters for all observation wells in the alluvial aquifer layers. The model also accurately simulated water tables greater than the RCW design minimum (a water level threshold at which RCW pumping is reduced) in all timesteps for which water level observation data existed. Water table elevation error was higher in other model layers that were not the focus of the study, and the model did not accurately match streamflow targets.

Iowa↗