USGS Science⌕ Search

SEARCH · USGS Science

Results for “Reviews in Fish Biology and Fisheries”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,676 records · Page 83Linked to original sources
USGS2024

Turbidite correlation for paleoseismology

Marine turbidite paleoseismology relies on the assumption of synchronous triggering of turbidity currents by earthquake shaking to infer rupture extent and recurrence. Such inference commonly depends on age dating and correlation of the physical stratigraphy of deposits carried by turbidity currents (i.e., turbidites) across great distances. Along the Cascadia subduction zone, which lies offshore the Pacific Northwest, USA, turbidite facies in core photographs, X-ray computed tomography images, and magnetic susceptibility (MS) data exhibit differences in character over relatively short distances, which implies that not all deposits can be correlated with confidence. Thus, subjective correlation based on expected similarity over great distances and weak age constraints does not independently support paleoseismic models. We present a new method for correlating turbidites along the Cascadia margin that can yield a more objective and repeatable stratigraphic framework to underpin earthquake recurrence. We use dynamic time warping to correlate MS logs and measure correlation coefficients of core pairs to evaluate correlation strength. We then compare these measures to a distribution of correlation coefficients of randomly generated turbidite sequences and find that only a small number of core pairs can be correlated more confidently than randomly stacked turbidites. This methodology promises a more robust correlation strategy for future stratigraphic studies.

Oregon, Washington↗
USGS2025

Toward a new framework to evaluate process-based model configurations and quantify data worth prior to calibration

Model criticism, discrimination, and selection methods often rely on calibrated model outputs. Because calibration can be computationally expensive, model criticism can first be undertaken by assessing model outputs obtained from limited prior parameter ensembles. However, such prior-based methods are often heuristic and do not formalize the notion of balancing model consistency with data and model complexity (i.e., model adequacy). We present a new framework to discriminate among candidate models prior to calibration that formalizes prior-to-calibration model adequacy into a metric to implicitly balance prior model output data coverage with model complexity represented by prior output (co)variance. The prior model adequacy metric “Mahalanobis distance deviation” quantifies the deviation of (a) the set of squared Mahalanobis distances of data from a prior model output distribution from (b) the set of squared Mahalanobis distances of data from their own distribution. A new data worth metric “discernment value” is also presented which quantifies the value of data for screening less-adequate models prior to calibration. Discernment value is calculated from the change in variance of a weighted average of prior model outputs from all candidate models due to less-adequate model outputs receiving lower weight. The framework is demonstrated using a one-dimensional groundwater flow model with eight possible configurations. A synthetic data network is used to test the framework. Results show the framework identifies the candidate models most similar to the true model used to create the synthetic data. Discernment values show variation in the value of different data types and locations for screening less-adequate models.

Water Resources Research↗
USGS2024

Global geologic map of Europa

Discovered by Galileo Galilei more than 400 years ago and imaged in detail by the Voyager 2 Galileo spacecraft, Jupiter’s icy moon Europa has been a source of intrigue. A range of science investigations indicate that it contains the key ingredients for habitability, notably energy, chemistry, and liquid water. Europa’s surface is geologically complex and, based on the dearth of impact craters, interpreted to be as young as ~60 Ma. The array of geologic features that characterize the surface include extensive ridged plains, regions of broad disruption termed chaotic terrain, long, quasi-linear ridges that span thousands of kilometers, and bands as much as 60 kilometers wide and that extend 100s of kilometers. These features, along with other geophysical measurements, indicate the presence of a global briny liquid water ocean beneath the ice shell. It was not until the arrival of the Galileo spacecraft in 1995 that the true nature and level of complexity of the surface was revealed. Although image data returned by Galileo provided insight into the structure of a variety of regions, the entire satellite has yet to be observed at a regional scale (less than 250 meters per pixel) and the detailed geologic nature of much of its surface remains a mystery. Establishing the global context of the distribution and timing of Europan geologic units forms a basis to understand regional and local scale processes, serves as a tool for the planning of future missions, and most of all is essential to gaining insight into the potential habitability of this icy world.

Scientific Investigations Map↗
USGS2023

Thickness of the Saudi Arabian crust

As part of a joint Saudi Geological Survey (SGS) and U.S. Geological Survey (USGS) project, we analyzed P-wave receiver functions from seismic stations covering most of the Kingdom of Saudi Arabia to map the thickness of the crust across the Arabia Plate. We present an update of crustal-thickness estimates and fill in gaps for the western Arabian Shield and the rifted margin at the Red Sea (the coastal plain), as well as the eastern Arabian Platform. We applied a conventional H-k stacking algorithm and included careful attention to stacking weights, two forms of sedimentary corrections for stations located on the Arabian Platform, and additional processing for noisy stations. We obtained useful results at 154 stations from 898 teleseismic events over a 2-year period from 1995–1997 (for non-SGS stations) and a 6-year period from 2008–2014 (for SGS stations). Average crustal thickness (that is, depth to the Mohorovičić discontinuity [Moho] below the surface) beneath the Red Sea coastal plain (the rift margin) is 29 kilometers (km), beneath the volcanic fields (known in Arabic as harra [plural] or harrat [singular]) is 35 km, beneath the Arabian Shield (excluding harrats) is 37 km, and beneath the Arabian Platform is 38 km. Crustal thinning appears not to extend east of the rift escarpment, suggesting uniform extension that is no broader at depth than at the surface. In contrast to some previous claims that the Arabian Platform crust is thicker than that of the Arabian Shield, we find no statistically significant difference between their whole crustal thicknesses. However, the average subsedimentary crustal thickness (that is, the crystalline crust) for stations on the Arabian Platform is 34 km, 3 km thinner than the crust of the Arabian Shield. Individual station P-wave (pressure) velocity and S-wave (shear) velocity ratios ( V P / V S ) are highly variable for the Arabia Plate, ranging from 1.60 to 1.97 and averaging 1.75, with a standard deviation of 0.07. There are no statistically significant differences between V P / V S ratios of the different geologic regions of Saudi Arabia. Similar V P / V S ratios, coupled with similar crustal thicknesses for harrats and the Arabian Shield, indicate that Cenozoic magmatism has contributed negligibly to crustal growth.

Professional Paper↗
USGS2024

On algorithmically determined versus traditional macroseismic intensity assignments

The utility of macroseismic data, defined as the effects of earthquakes on humans and the built environment, has been increasingly recognized following the advent of online systems that now produce unprecedented volumes of macroseismic intensity information. Contributed reports from the U.S. Geological Survey “Did You Feel It?” (DYFI) system ( Wald et al ., 1999 ) are used to generate intensity values with an algorithm based on seminal work by Dengler and Dewey (1998) . The algorithm was developed initially to reproduce intensity values assigned by expert opinion using questionnaire results collected by telephone survey. In this article, I discuss reasons why intensity values from (self‐selected) DYFI responses can differ from values that would be assigned by expert opinion given more complete data from randomly selected participants. For example, with the data used by Dengler and Dewey (1998) , intensities near 4 could be determined from the percentage of people who felt shaking in each town. With less spatially rich data from self‐selected participants, this percentage often cannot be determined reliably. Audible noises are key additional diagnostic criteria for modified Mercalli intensity (MMI) 4, but, although the DYFI system includes a question about noise, following Dengler and Dewey (1998) , the DYFI algorithm does not include a noise indicator. At the upper end of the scale, as defined the DYFI algorithm yields a maximum intensity value of 9.05, nominally corresponding to peak ground acceleration of 75% g . These and other factors can result in DYFI values that are low compared to traditional MMI values assigned using expert opinion, even absent factors that can bias traditional MMI assignments. Modern ground‐motion intensity conversion equations determined using DYFI intensities are expected to be appropriate for DYFI intensities, but the results of this study suggest that biases may be introduced if DYFI and traditional intensities are assumed to be interchangeable.

Seismological Research Letters↗
USGS2026

Multi-site evaluation of a postfire debris-flow runout forecast method

Postfire debris flows pose a hazard to human life, property, and infrastructure when they travel from steep source areas to urbanized alluvial fans or other developed areas. Existing methods for rapid (<1 week) postfire debris-flow hazard assessment document the increase in the likelihood and size of debris flows as the magnitude of high-intensity rain necessary to initiate debris flows increases but do not indicate the extent of downstream debris-flow runout. Although many models for the simulation of debris-flow motion are available, there is no established approach for using these models to delineate locations susceptible to postfire debris-flow runout that (a) is feasible to use at the spatial scale of an entire fire; (b) is appropriate for runout onto unconfined areas; (c) reproduces observed relations between runout and rainfall intensity; and (d) characterizes inherent uncertainty in runout, even without spatiotemporally variable rainfall. We propose and evaluate a method for generating postfire debris-flow runout hazard maps that has all the above qualities. Selection of case studies prioritized events triggered by a range of rainfall intensities, locations within and outside of southern California, and observed runout onto unconfined topography. Qualitative and quantitative assessment of performance for four events indicate that simulation results broadly match observations albeit with some discrepancies at a scale larger than structure or land parcel level (approximately 20-m by 20-m). The method may be used to identify potentially hazardous areas immediately following a fire and to provide approximate runout forecasts when a storm is imminent.

Arizona, California↗
USGS2025

Using probability difference to compare streamflow information of alternatives for efficient operation of monitoring networks

Efficient operation of streamflow monitoring networks requires investments in technology and labor that provide the greatest benefits from available resources. Economic analyses comparing the costs and benefits from different types of alternatives for monitoring have not been practical to implement. Streamflow information provides a generic measure of benefits that can be incorporated into operational decisions as an objective for monitoring networks. A methodology for comparing how accuracy, monitoring period, and monitoring instead of modeling affects streamflow information is developed from information-theoretic approaches for network design but contributes three novel features: (1) a probability-difference model for conditional probability of monotonically paired variables, (2) explicit discounting of unverified information that may exceed the accuracy of streamflow records, and (3) run analysis to account for non-stationarity in streamflow probabilities. Application of the methodology to the U.S. Geological Survey streamflow monitoring network indicates the value of monitoring period to reduce the uncertainty of streamflow probabilities and, thus, increase streamflow information. The methodology has important limitations, particularly for sites with non-perennial streamflow, but demonstrates that probability difference could be used to evaluate operational alternatives to increase the efficiency of monitoring networks.

PLOS Water↗
USGS2024

SCEC/USGS Community Stress Drop Validation Study: How spectral fitting approaches influence measured source parameters

Spectral source parameters used to estimate an earthquake’s stress drop (Δσ) can vary significantly across measurement approaches. The Statewide California Earthquake Center/U.S. Geological Survey Community Stress-Drop Validation Study was initiated to compare source parameter estimates, focusing initially on a dataset from the 2019 Ridgecrest earthquake sequence. As part of that validation effort, here we focus on one potential source of uncertainty: whether spectral fitting approaches alone, applied to a common set of spectra from the 2019 Ridgecrest sequence result in different source parameter estimates. By using a common set of benchmark spectra analyzed across a consistent frequency band of 1–40 Hz, we eliminate many sources of variability. A subgroup of validation study participants volunteered to estimate the low-frequency displacement (Ω0) and corner frequency ( f c ) by fitting a smooth function to benchmark displacement spectra. Participants used linear- or log-sampled spectra, assumed a Brune or Boatwright spectral model, and applied different misfit criteria. We compare 17 approaches used to estimate Ω0, f c , and Δσ for 54 earthquake spectra. Our results reveal that 35% of events have Δσ estimates within a factor of two, whereas others exhibit variations exceeding an order of magnitude. The variability in Ω0 and f c can largely be attributed to whether a spectrum is consistent with the smooth function of an idealized simple crack model. The trade-off between Ω0 and f c may be more pronounced when using linearly sampled spectra, as higher frequency spectral bumps control the fits. As expected, methods that assumed a Boatwright model tended to have lower Ω0 and somewhat higher f c compared to those assuming a Brune model, although resulting Δσ estimates are similar. When compared to the overall validation study results, the fitting approach alone may account for between 5% and 90% (25% on average) of the total variability in spectral Δσ.

California↗
USGS2025

Extreme plate boundary localization promotes shallow earthquake slip at the Japan Trench

The 2011 Mw9.1 Tohoku-oki earthquake is exceptional among great earthquakes for having peak slip of ~50-70 m on the shallowest portion of the plate boundary megathrust. International Ocean Discovery Program Expedition 405 drilled multiple holes through the megathrust in the large slip region and at a Pacific Plate input site. The megathrust preferentially develops at the top or base of the pelagic clay in the input section where pronounced contrasts in physical properties are present. This results in a narrow, weak fault located at a major mechanical contact between frontal prism mud and subducted clay. Localization imposed by the input section enhances the tendency for shallow seismic slip, showing the Japan Trench may be more susceptible to ruptures with large shallow slip than margins without weak clays.

Japan Trench↗
USGS2025

The Long Island Sound and Watershed Metadata map application

The Long Island Sound and its watershed encompass an area of about 17,000 square miles and include the Connecticut, Housatonic, and Thames Rivers, which all drain to the sound. Dozens of organizations from government agencies, nonprofits, and Tribal Nations have developed projects and monitoring programs to analyze and protect the water resources of the watershed and sound. The abundance of data and lack of an existing searchable index require a centralized metadata repository to allow users to find water resources data more efficiently. The U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency and the Long Island Sound Study, has created an interactive map application to visualize and search for metadata information across organizations working to monitor and protect the Long Island Sound.

Connecticut, Massachusetts, New Hampshire, New Yor↗
USGS2025

Evaluating mass flow meter measurements from chambers for greenhouse gas emissions from orphan wells and other point sources

This study evaluates the performance of a rigid gas flux chamber equipped with a mass flow meter (MFM) for measuring gas emissions from leaking orphan wells and similar pressure-driven gas point sources. We conducted a series of laboratory and field experiments to evaluate the sensitivity, stability, and dynamic range of an MFM chamber system and found an optimal method for sealing the chamber to the ground to isolate the emission source. From these results, we estimate the effects of different soil gas permeabilities on measurements and identify the uncertainty of environmental processes that can impact measurements. Simulations of an MFM chamber are compared to those of a dynamic flux chamber to contrast the data derived with both methodologies and illustrate the potential for measuring high variability leaks with the MFM chamber. Using a low flow resistance MFM and a chamber well-sealed to the ground, it is possible to measure leaks down to 1.08 x 10 -3 cubic meters per hour (m 3 h −1 ) (refenced to 25°/1 atm), corresponding to 0.77 grams per hour (g h −1 ) methane or 2.11 g h −1 carbon dioxide, with a mean uncertainty of 0.89 % relative standard deviation. Environmental processes such as heated gas inside the chamber from solar gain, wind blowing across the chamber vent, and changing humidity in the chamber, can cause variation in MFM measurements. Over 11 d of continuous monitoring under varying weather conditions, the standard deviation of the environmentally sourced signals was found to be 7.40 x 10 -3 m 3 h −1 (equivalent to or 5.27 g h −1 methane or 14.45 g h −1 carbon dioxide). Strategies to obtain the highest quality data from MFM chambers include burying the edges of the chamber below the surface sufficiently deep to seal the chamber edges against gas flow and soaking the dirt with water to lower the chances of escaping gases, while monitoring the gas flow and adjusting the chamber seal to achieve a maximum flow rate.

Atmospheric Measurement Techniques↗
USGS2024

The U.S. Geological Survey National Water Quality Network—Groundwater—2023

The U.S. Geological Survey (USGS) operates a National Water Quality Network (NWQN) to monitor trends in groundwater quality and assess emerging contaminants of concern. It is a “network of networks” with 81 subnetworks being sampled on a decadal time scale. Each year, eight of the subnetworks are sampled. Subnetworks have 20–30 wells each and include studies of domestic supply wells or shallow groundwater (20–50 feet deep) underlying urban land use or agricultural land use. Currently there are 2,114 wells in the network.

conterminous United States↗
USGS2024

2024 Crustal Deformation Modeling Workshop report

The 2024 Crustal Deformation Modeling Workshop was held June 10–14 at the Colorado School of Mines. The workshop included two days of tutorials on using PyLith for crustal deformation modeling, followed by three days of science talks and discussions. The workshop focused on four primary themes: ● Constraining long-term fault slip rates and their uncertainties using geodetic and geologic data; ● Earthquake cycle modeling with a focus on constraining models using seismic and geodetic data; ● Interaction of fluids and faulting; and ● Separating contributions of surface loading and tectonic loading in crustal deformation. The complete agenda is available on the CIG website.

Conference Paper↗
USGS2024

Slip rate for the Rose Canyon fault through San Diego, California, based on analysis of GPS data: Evidence for a potential Rose Canyon–San Miguel-Vallecitos fault connection?

The Rose Canyon fault is the southern extension of the larger Newport–Inglewood–Rose Canyon fault system, which represents a major structural boundary in the Inner Continental Borderland (ICB) offshore of southern California. Ten to fifteen percent of total plate boundary motion in southern California is thought to be accommodated by the faults of the ICB, but the exact distribution of slip is uncertain. With an onshore segment, the Rose Canyon fault offers an opportunity to measure the slip rate using traditional geodetic methods. In this study, we use Global Positioning System (GPS) surface velocities from a combined campaign and continuous GPS network to constrain elastic models of the Rose Canyon fault. We then compare the observed surface velocities with proposed conceptual models of regional fault connections that facilitate the transfer of slip into the Rose Canyon fault to assess how well the observations are explained by the models. The results of elastic half‐space models suggest that the Rose Canyon fault may be slipping toward the higher end of geologic estimates, with the preferred model indicating a slip rate of 2.4 ± 0.5 mm/yr. Although limited in terms of near‐fault benchmarks, we find an improved model fit using an asymmetrical elastic half‐space model and a higher slip rate, suggesting a potential rheological contrast across the Rose Canyon fault, similar to observations from the northern Newport–Inglewood fault segments. Observed GPS surface velocities, background seismicity, and gravity anomalies south of San Diego Bay point toward a more easterly trace for the Rose Canyon fault, suggesting a possible connection with the San Miguel–Vallecitos fault system. Such a connection could increase the potential rupture lengths of future earthquakes and have important consequences for regional seismic hazards.

California↗
USGS2025

Map of topographic lineaments interpreted as recent surface ruptures along the Bennett Valley and Southern Maacama Fault Zones, Sonoma County, California

This study documents lidar-illuminated topographic lineaments interpreted as evidence of recent surface fault ruptures and surface ruptures related to distributed deformation along the Bennett Valley Fault Zone and the southernmost Maacama Fault Zone in the northern San Francisco Bay area (fig. 1, on map sheet). Together, these fault zones form a structural connection across a right stepover between the main Maacama Fault Zone and the Rodgers Creek Fault, overlapping principal strands of the San Andreas plate boundary system north of San Francisco Bay (figs. 1, 2, on map sheet) that accommodate about a quarter of the ~40 millimeters per year of regional dextral tectonic slip (Parsons and others, 2013). Although much of the Bennett Valley Fault Zone is seismically active (McLaughlin and others, 2012; Sowers and others, 2010), only the north end of the fault zone (the “Spring Valley strand,” indicated on southern map panel of map sheet and labeled “D” in figure 2, on map sheet) was previously known to have youthful geomorphic expression and to displace Holocene deposits (McLaughlin and others, 2008; Sowers and others, 2010; Sowers and others, 2016). Holocene activity along the length of the Bennett Valley Fault Zone and southernmost Maacama Fault Zone, with possible implications for rupture propagation, continuity, and slip transfer, had not been identified. However, fault splays that project eastward from the Rodgers Creek Fault have been mapped and hypothesized to accommodate slip transfer to the Bennett Valley Fault Zone (Hecker and Randolph Loar, 2018). The generally subtle and distributed nature of surface-rupture evidence along the Bennett Valley and southernmost Maacama Fault Zones, and extensive vegetation cover, had left recent faulting previously unmapped along most of the zone. The map presented here represents a new compilation of inferred surface-rupture features detected using high-resolution topographic lidar data from an airborne lidar survey of Sonoma County, California (OpenTopography, 2014). These data, which enable subtle topographic features to be discerned, indicate that recent (likely Holocene) surface ruptures extend throughout the Bennett Valley and southernmost Maacama Fault Zones. The rupture-lineament map was created using a GIS (geographic information system) framework and is included herein as an image map at a scale of 1:36,000 and as digital datasets (included as supplemental information to this report). The mapping is intended to lay the groundwork for future studies designed to better characterize how plate-boundary slip is accommodated on this important and complex system of faults.

California↗
USGS2025

Bathymetric and acoustic-backscatter mapping of Lake Sammamish, Washington, during USGS field activity 2021-656-FA

In 2021, scientists from the U.S. Geological Survey (USGS) acquired bathymetric and acoustic-backscatter data within Lake Sammamish, Washington. Mapping was completed to find evidence of past earthquakes such as underwater landslides and is part of a larger USGS project to understand the overall geologic hazards history of the Cascadia Margin region. The survey was conducted using the USGS research vessel Parke Snavely outfitted with an interferometric sidescan-sonar system for swath mapping. Three estimates of bathymetric uncertainty were calculated from the post-processed bathymetric data. This report provides a summary of the mapping mission.

Washington↗
USGS2024

Elastic stress coupling between supraglacial lakes

Supraglacial lakes have been observed to drain within hours of each other, leading to the hypothesis that stress transmission following one drainage may be sufficient to induce hydro-fracture-driven drainages of other nearby lakes. However, available observations characterizing drainage-induced stress perturbations have been insufficient to evaluate this hypothesis. Here, we use ice-sheet surface-displacement observations from a dense global positioning system array deployed in the Greenland Ice Sheet ablation zone to investigate elastic stress transmission between three neighboring supraglacial lake basins. We find that drainage of a central lake can place neighboring basins in either tensional or compressional stress relative to their hydro-fracture scarp orientations, either promoting or inhibiting hydro-fracture initiation beneath those lakes. For two lakes located within our array that drain close in time, we identify tensional surface stresses caused by ice-sheet uplift due to basal-cavity opening as the physical explanation for these lakes' temporally clustered hydro-fracture-driven drainages and frequent triggering behavior. However, lake-drainage-induced stresses in the up-flowline direction remain low beyond the margins of the drained lakes. This short stress-coupling length scale is consistent with idealized lake-drainage scenarios for a range of lake volumes and ice-sheet thicknesses. Thus, on elastic timescales, our observations and idealized-model results support a stress-transmission hypothesis for inducing hydro-fracture-driven drainage of lakes located within the region of basal cavity opening produced by the initial drainage, but refute this hypothesis for distal lakes.

JGR Earth Surface↗
USGS2024

The importance of nodal plane orientation diversity for earthquake focal mechanism stress inversions

Inversions of earthquake focal mechanisms are among the most accessible and reliable methods for determining crustal stress. However, the use of this method varies widely, and assumptions that underpin it are often violated, potentially compromising stress estimates. We investigate the consequences of violating the little-studied assumption that the focal mechanisms have diverse orientations. Our approach is to employ data-informed synthetic mechanisms, with nodal plane orientations defined by recent earthquake lineaments in the Midland Basin, western Texas, and rakes consistent with slip in the mapped stress field. Using both the traditional stress inversion method that assumes constant shear stress magnitudes on the causative faults as well as a recently published variable shear stress method, we show that low fault plane diversity can cause maximum horizontal stress ( S Hmax ) orientation and relative principal stress magnitude (faulting regime) estimates to differ markedly from the true values. This problem is compounded for catalogs with even modest amounts of noise (≤15°) or few (e.g., 20) mechanisms. Significantly, traditional approaches for quantifying uncertainty such as the bootstrap can severely underestimate the true uncertainty under these circumstances. To remedy this, we provide simple tools to quantify nodal plane orientation diversity and stress inversion reliability.

Geological Society of London Special Publications↗