SEARCH · USGS Science

Results for “Map Series”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,495 records · Page 83Linked to original sources

USGS1952

Geology of the Quartz Creek Pegmatite District, Gunnison County Colorado

The Quartz Creek pegmatite district includes an area about 29 square miles in the vicinity of Quartz Creek in Gunnison County,. Colo. This area contains 1,803 pegmatites that are intruded into pre-Cambrian rocks. The rocks exposed in the district range in age from pre-Cambrian to Recent. The oldest pre-Cambrian rocks are chiefly quartzites interbedded with a few arkoses and conglomerates. These rocks are surrounded by more abundant hornblende gneiss and tonalite. A small body of biotite tonalite was intruded and two thin layers of dacitic pillow lava were extruded into this series. The hornblende gneiss and tonalite have the same composition and differ only in texture. The older material (hornblende gneiss) has a well-marked lineation, whereas the younger (tonalite) is equigranular. Subsequently, a large body of quartz monzonite was intruded along the northern boundary of the mapped area. Later, coarse-grained granite was intruded into the southern part of the area. Dikes of fine-grained granite cut the coarse-grained variety. The last period of intrusive activity in pre-Cambrian time is marked by a large number of pegmatites. The pre-Cambrian rocks were tilted and eroded, and the flatlying Jurassic Morrison formation was deposited on the irregular surface. This formation is conformably overlain by the Cretaceous Dakota sandstone. Faulting produced a vertical offset of 410 feet in the Mesozoic sediments along the only large fault in the area. At the end of Mesozoic time there was another period of erosion. Tertiary (?) tuff is exposed in small, scattered areas in the southern part of the district. It overlies both the Dakota sandstone and pre-Cambrian formations. Glacial till occurs along the edges of Quartz Creek and Wood Gulch. Quaternary alluvium fills the valley bottoms. Although the composition of the country rock has little effect on the shape of the pegmatites, the foliation imposed on this rock has a localizing effect and in part controls the ultimate shape of pegmatites. Zoned and related internal structures are not well developed in the pegmatites of this region. Many of the pegmatites are homogeneous and those that are zoned usually contain a large wall zone and small discontinuous cores. In addition to the more common homogeneous and zoned pegmatites, 7 percent of the pegmatites show a layered structure of textural and mineralogical units not repeated on the opposite side of the pegmatite. Other internal structural units include pegmatites which vary in composition along strike, multiple or “line-rock pegmatites” and fracture fillings. The mineralogy of the pegmatites is described in detail. Specific attention was given to most of the 27 observed minerals. A study of the index of refraction of 439 specimens of plagioclase showed that the variation from zone to zone and layer to layer is minor and that there is no systematic variation in respect to the entire district. No correlation could be found between the refractive index of plagioclase in the pegmatites and the type country rock, or the presence of various accessory minerals. Index of refraction determinations on 95 specimens of muscovite showed no constant variation from wall zone to core or from layer to layer. Curved muscovite has identical optical properties with the flat variety. The index of refraction was determined for 189 beryl specimens. The beryl in the pegmatites containing only a wall zone and a core showed no difference between zones, but in pegmatites that have intermediate zones, the indices of refraction of the beryl showed an inward increase in the alkali content from the contact. Beryl occurs with almost all of the pegmatite minerals and is not restricted in its mineral associations. Tourmaline, except the black variety, is associated with lepidolite. Dark green and blue tourmaline is found in the outer zones of pegmatites containing lepidolite, and the pink and light green varieties are found in direct contact with lepidolite. Lepidolite occurs in aggregates of fine grains, in flat plates, and in curved plates; the three varieties are optically identical. The lighter-colored varieties have higher indices of refraction and contain less lithia than the darker varieties. In addition, the occurrence of the following minerals is described in detail: perthite, quartz, martite, biotite, garnet, columbite-tantalite, monazite, microlite, topaz, gahnite, allanite, and an unidentified mineral. The lack of alteration in the wall rocks adjacent to the pegmatites is interpreted as indicating that the original pegmatite magma did not have an excess of materials such as B, OH-, and P that are needed to form alteration minerals. Because of their low concentration, the above materials were available only in the pegmatitic magma during its crystallization. Pegmatites that contain the rare minerals such as beryl, tourmaline, curved muscovite, biotite, magnetite, monazite, columbite-tantalite, cleavelandite, topaz, lepidolite, and microlite show a grouping in clusters within the district. Beryl-bearing pegmatites occur most abundantly in hornblende gneiss and are only rarely found in either granite or quartz monzonite. The types of minerals that form in a pegmatite appear to be determined by the character of the material segregated from the original magma and the period in which it segregated. The elements escape at one period and may be from only-a specific pocket in the magma. These liquids tend to form groups of pegmatites in which the later bodies contain a high proportion of volatiles. Inferred reserves of the district are estimated for beryl, scrap mica, both hand-cobbing and milling feldspar, lepidolite, columbite-tantalite, topaz, monazite, and microlite. No sheet mica was found. Reserves are small and transportation costs are high so substantial production of low-priced feldspar and scrap mica will depend on the adoption of economica milling techniques for recovering the large quantities of feldspar available. Beryl is irregularly distributed and its recovery as a byproduct will depend on the establishment of a stable market for feldspar and scrap mica. Lepidolite reserves are small low grade.

Colorado↗

USGS2013

National wildlife refuge visitor survey 2012--Individual refuge results

The National Wildlife Refuge System (Refuge System), established in 1903 and managed by the U.S. Fish and Wildlife Service (Service), is the leading network of protected lands and waters in the world dedicated to the conservation of fish, wildlife and their habitats. There are 560 national wildlife refuges and 38 wetland management districts nationwide, encompassing more than 150 million acres. The Refuge System attracts nearly 45 million visitors annually, including 34.8 million people who observe and photograph wildlife, 9.6 million who hunt and fish, and nearly 675,000 teachers and students who use refuges as outdoor classrooms. Understanding visitor perceptions of refuges and characterizing their experiences on refuges are critical elements of managing these lands and meeting the goals of the Refuge System. The Service collaborated with the U.S. Geological Survey to conduct a national survey of visitors regarding their experiences on national wildlife refuges. The purpose of the survey was to better understand visitor experiences and trip characteristics, to gauge visitors’ levels of satisfaction with existing recreational opportunities, and to garner feedback to inform the design of programs and facilities. The survey results will inform performance, planning, budget, and communications goals. Results will also inform Comprehensive Conservation Plans (CCPs), visitor services, and transportation planning processes. This Data Series consists of 25 separate data files. Each file describes the results of the survey for an individual refuge and contains the following information: • Introduction: An overview of the Refuge System and the goals of the national surveying effort. • Methods: The procedures for the national surveying effort, including selecting refuges, developing the survey instrument, contacting visitors, and guidance for interpreting the results.• Refuge Description: A brief description of the refuge location, acreage, purpose, recreational activities, and visitation statistics, including a map (where available) and refuge website link. • Sampling at This Refuge: The sampling periods, locations, and response rate for the refuge. • Selected Survey Results: Key findings for the refuge, including: o Visitor and trip characteristics o Visitor spending in the local communities o Visitors opinions about the refuge o Visitor opinions about National Wildlife Refuge System topics • Conclusion • References Cited • Survey Frequencies (Appendix A): The survey instrument with frequency results for the refuge. • Visitor Comments (Appendix B): The verbatim responses to the open-ended survey questions for the refuge.Individual-refuge results for the 53 participating refuges in the 2010-2011 national effort are available at http://pubs.usgs.gov/ds/643/ as part of USGS Data Series 643. Combined results for the 53 participating refuges in the 2010-2011 national effort are available at http://pubs.usgs.gov/ds/685/ as part of USGS Data Series 685.

Data Series↗

USGS1999

Thermal maturity of sedimentary rocks in Alaska: Digital resources

This CD-ROM is an updated re-release of three USGS publications on the thermal maturity of sedimentary rocks in Alaska: 1) Vitrinite reflectance and conodont color alteration index data from Alaska; data to accompany the thermal maturity map of Alaska; Open-File Report 92-409 (1992), version 1.1 (revised 1999), 2) Generalized thermal maturity map of Alaska; Miscellaneous Geologic Investigations Map I-2494, scale 1:2,500,000 (1996), 3) Thermal evolution of sedimentary basins in Alaska; Bulletin 2142, 131 p. (1996).

Alaska↗

USGS1968

Summary of results from a trip February 6-March 5, 1966, to B'ir Idimah, Jabal Ashirah, and As Sarat Mountains, Saudi Arabia

The geologic setting of the pyrite replacement deposit at Wadi Wassat was mapped in February 1966. From this mapping it is inferred that the pyrite deposits occur along a sub-vertical, north-trending fault in andesite and other rocks at the crest line of an anticline in a roof pendant. The pendant is in a composite pluton formed by a per-alkalic magma series. Diorite and biotite granite are the most common and older members of the series. Pyroxene granite and quartz porphyry are less common younger rocks in the series. Extrusive equivalents of these plutonic rocks form dikes in the area. The pyrite is interpreted to have been deposited from hydrothermal solutions after diorite and biotite granite were consolidated and while pyroxene granite was being emplaced. Structures controlling the deposition of the pyrite are regional. Exploration at 1:2,500 scale by geologic, geochemical, and electro-magnetic methods are recommended. Diamond drilling should accompany the other exploration. Chemical analyses of 22 specimens of Precambrian marble from the Asir quadrangle shows that seven deposits have a composition within the range of compositions of natural cement rocks used for Roman cement and quick-setting cement. None of the samples is rich enough in CaO for use as a raw material for Portland cement, and most samples of the marble have too much MgO for Portland cement. Analyses of the major elements in 71 samples of lateritic material from the As Sarat mountains show that none of the laterite can be used as an ore for iron owing to too little iron and too much alumina, silica, and sulfur. One sample has the alumina-silica ratio of gibbsite or boehmite. One sample has alumina and sulfur in percentages suggesting the presence of alunite, and several other samples probably contain alunite. Because alunite is potash rich and might be used as a raw material for potash fertilizer, it is recommended that an airborne radiometric survey be made of tine As Sarat mountains to locate potassium-rich parts of the laterite.

Open-File Report↗

USGS2021

Scalability and performance tradeoffs in quantifying relationships between elevation and tidal wetland plant communities

Elevation is a major driver of plant ecology and sediment dynamics in tidal wetlands, so accurate and precise spatial data are essential for assessing wetland vulnerability to sea-level rise and making forecasts. We performed survey-grade elevation and vegetation surveys of the Global Change Research Wetland, a brackish microtidal wetland in the Chesapeake Bay estuary, Maryland (USA), to both intercompare unbiased digital elevation model (DEM) creation techniques and to describe niche partitioning of several common tidal wetland plant species. We identified a tradeoff between scalability and performance in creating unbiased DEMs, with more data-intensive methods such as kriging performing better than 3 more scalable methods involving post-processing of light detection and ranging (LiDAR)-based DEMs. The LiDAR Elevation Correction with Normalized Difference Vegetation Index (LEAN) method provided a compromise between scalability and performance, although it underpredicted variability in elevation. In areas where native plants dominated, the sedge Schoenoplectus americanus occupied more frequently flooded areas (median: 0.22, 95% range: 0.09 to 0.31 m relative to North America Vertical Datum of 1988 [NAVD88]) and the grass Spartina patens , less frequently flooded (0.27, 0.1 to 0.35 m NAVD88). Non-native Phragmites australis dominated at lower elevations more than the native graminoids, but had a wide flooding tolerance, encompassing both their ranges (0.19, -0.05 to 0.36 m NAVD88). The native shrub Iva frutescens also dominated at lower elevations (0.20, 0.04 to 0.30 m NAVD88), despite being previously described as a high marsh species. These analyses not only provide valuable context for the temporally rich but spatially restricted data collected at a single well-studied site, but also provide broad insight into mapping techniques and species zonation.

Maryland↗

USGS2018

Geologic map of the Hayfield quadrangle, Frederick County, Virginia

The Hayfield 7.5-minute quadrangle is located within the Valley and Ridge physiographic province of northern Virginia. The quadrangle includes the topographical lowland area of the northern Great Valley to the southeast, the narrow ridge of Little North Mountain along the western edge of the Great Valley, and the broad region of elongated valleys and ridges west of Little North Mountain. The most prominent physiographic feature within the quadrangle is Great North Mountain, which extends across the northwestern portion of the quadrangle. All exposed bedrock units are Paleozoic sedimentary rocks ranging from Middle Cambrian to Late Devonian, approximately 513 to 359 Ma. The clastic and carbonate sedimentary strata in the quadrangle reflect nearshore and offshore marine and deltaic depositional environments. The deposits indicate minor sea level transgression and regression cycles along a passive continental margin during the Late Cambrian to Middle Ordovician, and major sea level changes resulting from tectonic uplift during the Late Ordovician Taconian orogeny and the Middle to Late Devonian Acadian orogeny. Compressive forces caused by the continental collision during the Paleozoic Alleghanian orogeny resulted in folding and faulting of the sedimentary rock strata, with northwestward tectonic transport. The North Mountain fault zone, spanning across the southeastern part of the quadrangle, forms the western border of the Great Valley in northern Virginia and is a series of northeast-trending thrust faults with multiple splays that separate the Silurian and Devonian shales, siltstones, and sandstones from the Cambrian and Ordovician carbonate rocks and shales. Topographic ridges in the quadrangle are primarily held up by sandstones and orthoquartzites that are relatively resistant to erosion. Surficial materials include unconsolidated alluvium, colluvium, debris flow, and terrace deposits that are assumed to be of Quaternary age. Alluvium was mapped along the larger streams; locally, some low alluvial terraces exist but have not been broken out within this unit. Debris flow deposits were mapped where recognized in the lidar-derived topographic imagery on the flanks of Great North Mountain. Colluvium (not mapped separately) covers most of the steeper slopes and fills the bottoms of many of the mountain hollows, and is composed mainly of sandstone boulders and cobbles, and fragments of chert.

Virginia↗

USGS1989

Map showing the depth to the base of the deepest ice-bearing permafrost as determined from well logs, North Slope, Alaska

Because gas hydrates from within a limited temperature range, subsurface equilibrium temperature data are necessary to calculate the depth and thickness of the gas-hydrate stability field. Acquiring these data is difficult because drilling activity often disrupts equilibrium temperatures in the subsurface, and a well mush lie undisturbed until thermal equilibrium is reestablished (Lachenbruch and Brewer, 1959). On the North Slope if Akaska, a series of 46 oil and gas exploratory wells, which were considered to be near thermal equilibrium (Lachenbruch and others, 1982; 1987), were surveyed with high-resolution temperature devices (see table 1). However, several thousand other exploratory and production wells have been drilled on the North Slope, and although they do not include temperature profiles, their geophysical logs often allow descrimination between ice-bearing and non-ice-bearing strata. At the outset of this study, the coincidence of the base of ice-bearing strata being near the same depth as the 0 °C isotherm at Prudhoe Bay (Lachenbruch and others, 1982) appeared to offer an opportunity to quickly and inexpensively expand the size of our subsurface temperature data base merely by using well logs to identify the base of the ice-bearing strata.

Alaska↗

USGS2000

Predevelopment water-level map of the Santa Fe Group aquifer system in the middle Rio Grande basin between Cochiti Lake and San Acacia, New Mexico

Because of its increasing population and limited water resources, the Middle Rio Grande Basin between Cochiti Lake and San Acacia, New Mexico, has recently become the subject of intense study. In particular, the U.S. Geological Survey (USGS) in cooperation with the City of Albuquerque has constructed a series of ground-water-flow models of the Tertiary and Quaternary basin-fill deposits of the Santa Fe Group aquifer system (Kernodle and Scott, 1986; Kernodle and others, 1987; Kernodle and others, 1995; Kernodle, 1998; Tiedeman and others, 1998). The ground-water-flow system also has been the focus of hydrochemical studies and other efforts intended largely to help develop an improved flow model. Among the information critical to a thorough understanding of the ground-water-flow system are water-level data that indicate the directions of ground-water flow and the magnitudes of hydraulic gradients in the aquifer prior to perturbation by substantial ground-water withdrawals (under predevelopment conditions).

Water-Resources Investigations Report↗

USGS2009

Water-level altitudes 2009 and water-level changes in the Chicot, Evangeline, and Jasper Aquifers and compaction 1973-2008 in the Chicot and Evangeline Aquifers, Houston-Galveston Region, Texas

This report, done in cooperation with the Harris-Galveston Subsidence District, the City of Houston, the Fort Bend Subsidence District, and the Lone Star Groundwater Conservation District, is one in an annual series of reports that depicts water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers, and compaction in the Chicot and Evangeline aquifers in the Houston-Galveston region, Texas. The report (excluding appendixes) contains 16 sheets and 15 tables: 3 sheets are maps showing current-year (2009) water-level altitudes for each aquifer, respectively; 3 sheets are maps showing 1-year (2008-09) water-level changes for each aquifer, respectively; 3 sheets are maps showing 5-year (2004-09) water-level changes for each aquifer, respectively; 4 sheets are maps showing long-term (1990-2009 and 1977-2009) water-level changes for the Chicot and Evangeline aquifers, respectively; 1 sheet is a map showing long-term (2000-2009) water-level change for the Jasper aquifer; 1 sheet is a map showing site locations of borehole extensometers; and 1 sheet comprises graphs showing measured compaction of subsurface material at the sites from 1973 or later through 2008, respectively. Tables listing the data used to construct the aquifer-data maps and the compaction graphs are included.

Texas↗

USGS2010

Herbicide treatment of invasive Vinca major growing with endangered Galium buxifolium, an island endemic

Galium buxifolium E. Greene [Rubiaceae] (sea-cliff bedstraw) is a small shrub restricted to San Miguel and Santa Cruz Islands, in the California Channel Islands. Almost all of the 26 known populations grow on vertical north-facing sea cliffs in native scrub, sandwiched between the sea below and non-native annual grasslands on the terraces above. A notable exception is a popula?tion at Pelican Bay on Santa Cruz Island, growing on the cliff and on thin terrace soils above the cliff in a stand of coastal bluff scrub that is recovering from more than a century of sheep grazing (Figure 1). Ironically, this stand is near the location of the historic Eaton Resort, a charismatic inn frequented by Hollywood glitterati in the early 1900s. Several landscape ornamentals planted there persist today in the area of the Galium population. Italian stone pine (Pinus pinaea) and eucalyptus (Eucalyptus spp.) tower over the site while the invasive groundcover Vinca major L. [Apocynaceae] (greater periwinkle) forms dense mats at the cliff edge that are spreading into the developing native plant stand. Wherever the Galium is found it is intermixed with other native scrub plants in dense communities on moist ocean bluffs. Historic notes and herbarium collections indicate that it may have been more widespread on nearshore terraces adjacent to sea-cliff populations before conversion to grassland. Since Pelican Bay is the only site that we know of where Galium is spreading onto the nearby terrace, we wanted to know whether the Vinca posed a roadblock to upslope population expansion. In 2005 we mapped Vinca and Galium at the site. We also measured Galium individuals to see where the smaller, younger plants were to better understand where the population is expanding. We observed that 1) both the Galium and the Vinca appear to be spreading from the cliff face upslope onto a series of rock outcrops, stone walls and benches, 2) the native scrub community is recovering at the site and 3) the Vinca appears to be moving into the native scrub where it overtops small plants, including those Galium in the smallest size classes. This observed pattern of Vinca displacement of native vegetation has been noted in other places, where it is treated as an invasive weed. We concluded that Vinca may pose a threat to the expansion of both the native scrub and the Galium population that it supports. Therefore, we worked with the US Fish and Wildlife Service and others to develop a research project investigating 1) best techniques for killing Vinca within the boundaries of an endangered plant population and 2) demographic response of Galium to the treatment. Our intent is to push Vinca back to the vertical cliff face to give the natives a chance to establish a vigorous stand. Our conservation goal is to encourage natural establishment of new Galium plants on the terrace along with expansion of the native coastal bluff scrub and Galium population. Our immediate treatment objective is to reduce live Vinca cover by 90 % on the accessible upslope portions of the habitat. Our recovery objective is no net loss of Galium plants 2006-2016.

California↗

USGS2019

Landsat: The cornerstone of global land imaging

Since 1972, the joint NASA/ U.S. Geological Survey Landsat series of Earth Observation satellites have provided an uninterrupted space-based data record of the Earth’s land surface to help advance scientific research towards the understanding of our planet and the environmental impact of its inhabitants. Early Landsat satellites offered a wealth of new data that improved mapping of remote areas and geologic features along with digital analysis of vegetation. The utility of Landsat’s spatial and spectral resolution has advanced its use for applications that benefit society such as global crop forecasting, forest monitoring, water use, carbon assessments, and the base for Google Maps. Landsat’s long-term data record provides an unrivaled resource for observing land cover and land-use change over a timescale of decades. The free and open Landsat data policy in 2008 was a paradigm shift for the world. Today, due to improved analytical and computing capabilities, the Landsat archive is poised to shift into a more real-time monitoring and understanding of the Earth.

GIM International↗

USGS2019

Near-field remote sensing of Alaskan Rivers

The U.S. Geological Survey (USGS) Geomorphology and Sediment Transport Laboratory (GSTL), in collaboration with the U.S. Army Corps of Engineers Cold Regions Research and Engineering Laboratory (CRREL), acquired remotely sensed data from several Alaskan rivers in 2017 and 2018 with the goal of developing a methodology for measuring streamflow from a helicopter. CRREL operates a custom airborne lidar system that can be deployed in a helicopter-based pod (HeliPod). Data were collected with the HeliPod near existing USGS streamflow information stations on the Knik, Matanuska, Chena, and Salcha Rivers in both 2017 and 2018. Sites on the Tanana and Snow Rivers were added in 2018. In 2018, the HeliPod was modified to accommodate both a thermal infrared and a visible camera. The cameras were integrated with the flight management software to simultaneously acquire imagery with lidar. The Global Navigation Satellite System (GNSS) and inertial measurement unit (IMU) in the HeliPod were used to compute trajectories with precise position and orientation information needed for image orthorectification. The HeliPod sensors provide data for measuring river channel characteristics. Lidar can map the elevation of the water surface and thus be used to measure water-surface slopes and return intensity can be used to delineate the extent of the wetted river channel. Various approaches are currently being evaluated to estimate surface flow velocity from visible and thermal image time series. In this paper, we examine and compare water-surface elevation returns and slopes derived from the HeliPod lidar and found good agreement with measurements made using conventional field-based techniques.

Alaska↗

USGS2023

Mapping karst groundwater flow paths and delineating recharge areas for Fern Cave, Alabama, through the use of dye tracing

Fern Cave in Jackson County, Alabama, is a 15.6-mile-long (25.1-kilometer) cave system, managed by the U.S. Fish and Wildlife Service and Southeastern Cave Conservancy, that has the second highest biodiversity of any cave in the southeastern United States. Groundwater in karst ecosystems is known to be susceptible to impacts from human-induced land-use activities in watersheds that contribute recharge to the groundwater system. To provide the U.S. Fish and Wildlife Service with necessary baseline information on the groundwater flow system in Fern Cave, the U.S. Geological Survey and the Kentucky Geological Survey conducted a series of dye traces during 2019–21 to delineate the watershed recharging the cave system. The dye traces identified two separate streams that flow through the cave and a recharge area of 1.73 square miles (4.48 square kilometers) draining to the cave system. Current land use within the recharge area is dominated by deciduous forest with minimal additional land use types, indicating a low potential for undesirable effects to the cave by anthropogenic sources.

Alabama↗

USGS1998

Geology of the conterminous United States at 1:2,500,000 scale a digital representation of the 1974 P.B. King and H.M. Beikman map

This CD-ROM contains a digital version of the Geologic Map of the United States, originally published at a scale of 1:2,500,000 (King and Beikman, 1974b). It excludes Alaska and Hawaii. In addition to the graphical formats, the map key is included in ASCII text. A geographic information system (GIS) allows combining and overlaying of layers for analysis of spatial relations not readily apparent in the standard paper publication. This disc contains only geology. However, digital data on geology, geophysics, and geochemistry can be combined to create useful derivative products-- for example, see Phillips and others (1993). This CD-ROM contains a copy of the text and figures from Professional Paper 901 by King and Beikman (1974a). This text describes the historical background of the map, details of the compilation process, and limitations to interpretation. The digital version of the text can be searched for keywords or phrases.

Data Series↗

USGS2005

Void-Filled SRTM Digital Elevation Model of Afghanistan

EXPLANATION The purpose of this data set is to provide a single consistent elevation model to be used for national scale mapping, GIS, remote sensing applications, and natural resource assessments for Afghanistan's reconstruction. For 11 days in February of 2000, the National Aeronautics and Space Administration (NASA), the National Geospatial-Intelligence Agency ian Space Agency (ASI) flew X-band and C-band radar interferometry onboard the Space Shuttle Endeavor. The mission covered the Earth between 60?N and 57?S and will provide interferometric digital elevation models (DEMs) of approximately 80% of the Earth's land mass when processing is complete. The radar-pointing angle was approximately 55? at scene center. Ascending and descending orbital passes generated multiple interferometric data scenes for nearly all areas. Up to eight passes of data were merged to form the final processed Shuttle Radar Topography Mission (SRTM) DEMs. The effect of merging scenes averages elevation values recorded in coincident scenes and reduces, but does not completely eliminate, the amount of area with layover and terrain shadow effects. The most significant form of data processing for the Afghanistan DEM was gap-filling areas where the SRTM data contained a data void. These void areas are as a result of radar shadow, layover, standing water, and other effects of terrain as well as technical radar interferometry phase unwrapping issues. To fill these gaps, topographic contours were digitized from 1:200,000 - scale Soviet General Staff Topographic Maps which date from the middle to late 1980's. Digital contours were gridded to form elevation models for void areas and subsequently were merged with the SRTM data through GIS and image processing techniques. The data contained in this publication includes SRTM DEM quadrangles projected and clipped in geographic coordinates for the entire country. An index of all available SRTM DEM quadrangles is displayed here: Index_Geo_DD.pdf. Also included are quadrangles projected into their appropriate Universal Transverse Mercator (UTM) projection. The country of Afghanistan spans three UTM Zones: Zone 41, Zone 42, and Zone 43. Maps are stored in their respective UTM Zone projection. Indexes of all available SRTM DEM quadrangles in their respective UTM zone are displayed here: Index_UTM_Z41.pdf, Index_UTM_Z42.pdf, Index_UTM_Z43.pdf.

Data Series↗

USGS2012

Bathymetry and acoustic backscatter data collected in 2010 from Cat Island, Mississippi

Scientists from the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center (SPCMSC), in collaboration with the U.S. Army Corps of Engineers (USACE), conducted geophysical and sedimentological surveys around Cat Island, the westernmost island in the Mississippi-Alabama barrier island chain (fig. 1). The objectives of the study were to understand the geologic evolution of Cat Island relative to other barrier islands in the northern Gulf of Mexico and to identify relationships between the geologic history, present day morphology, and sediment distribution. This report contains data from the bathymetry and side-scan sonar portion of the study collected during two geophysical cruises. Interferometric swath bathymetry and side-scan sonar data were collected aboard the RV G.K. Gilbert September 7-15, 2010. Single-beam bathymetry was collected in shallow water around the island (< 2 meter (m)) from the RV Streeterville from September 28 to October 2, 2010, to cover the data gap between the landward limit of the previous cruise and the shoreline. This report serves as an archive of processed interferometric swath and single-beam bathymetry and side scan sonar data. GIS data products include a 50-m cell size interpolated gridded bathymetry surface, trackline maps, and an acoustic side-scan sonar image. Additional files include error analysis maps, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FDGC) metadata.

Alabama;Mississippi↗

USGS2009

Quaternary science reviews Pacific Basin tsunami hazards associated with mass flows in the Aleutian arc of Alaska

We analyze mass-flow tsunami generation for selected areas within the Aleutian arc of Alaska using results from numerical simulation of hypothetical but plausible mass-flow sources such as submarine landslides and volcanic debris avalanches. The Aleutian arc consists of a chain of volcanic mountains, volcanic islands, and submarine canyons, surrounded by a low-relief continental shelf above about 1000–2000 m water depth. Parts of the arc are fragmented into a series of fault-bounded blocks, tens to hundreds of kilometers in length, and separated from one another by distinctive fault-controlled canyons that are roughly normal to the arc axis. The canyons are natural regions for the accumulation and conveyance of sediment derived from glacial and volcanic processes. The volcanic islands in the region include a number of historically active volcanoes and some possess geological evidence for large-scale sector collapse into the sea. Large scale mass-flow deposits have not been mapped on the seafloor south of the Aleutian Islands, in part because most of the area has never been examined at the resolution required to identify such features, and in part because of the complex nature of erosional and depositional processes. Extensive submarine landslide deposits and debris flows are known on the north side of the arc and are common in similar settings elsewhere and thus they likely exist on the trench slope south of the Aleutian Islands. Because the Aleutian arc is surrounded by deep, open ocean, mass flows of unconsolidated debris that originate either as submarine landslides or as volcanic debris avalanches entering the sea may be potential tsunami sources. To test this hypothesis we present a series of numerical simulations of submarine mass-flow initiated tsunamis from eight different source areas. We consider four submarine mass flows originating in submarine canyons and four flows that evolve from submarine landslides on the trench slope. The flows have lengths that range from 40 to 80 km, maximum thicknesses of 400–800 m, and maximum widths of 10–40 km. We also evaluate tsunami generation by volcanic debris avalanches associated with flank collapse, at four locations (Makushin, Cleveland, Seguam and Yunaska SW volcanoes), which represent large to moderate sized events in this region. We calculate tsunami sources using the numerical model TOPICS and simulate wave propagation across the Pacific using a spherical Boussinesq model, which is a modified version of the public domain code FUNWAVE. Our numerical simulations indicate that geologically plausible mass flows originating in the North Pacific near the Aleutian Islands can indeed generate large local tsunamis as well as large transoceanic tsunamis. These waves may be several meters in elevation at distal locations, such as Japan, Hawaii, and along the North and South American coastlines where they would constitute significant hazards.

Alaska↗

USGS2002

A passive microwave snow depth algorithm with a proxy for snow metamorphism

Passive microwave brightness temperatures of snowpacks depend not only on the snow depth, but also on the internal snowpack properties, particularly the grain size, which changes through the winter. Algorithms that assume a constant grain size can yield erroneous estimates of snow depth or water equivalent. For snowpacks that are subject to temperatures well below freezing, the bulk temperature gradient through the snowpack controls the metamorphosis of the snow grains. This study used National Weather Service (NWS) station measurements of snow depth and air temperature from the Northern US Great Plains to determine temporal and spatial variability of the snow depth and bulk snowpack temperature gradient. This region is well suited for this study because it consists primarily of open farmland or prairie, has little relief, is subject to very cold temperatures, and has more than 280 reporting stations. A geostatistical technique called Kriging was used to grid the randomly spaced snow depth measurements. The resulting snow depth maps were then compared with the passive microwave observations from the Special Sensor Microwave Imager (SSM/I). Two snow seasons were examined: 1988-89, a typical snow year, and 1996-97, a record year for snow that was responsible for extensive flooding in the Red River Basin. Inspection of the time series of snow depth and microwave spectral gradient (the difference between the 19 and 37 GHz bands) showed that while the snowpack was constant, the spectral gradient continued to increase. However, there was a strong correlation (0.6 < R2 < 0.9) between the spectral gradient and the cumulative bulk temperature gradient through the snowpack (TGI). Hence, TGI is an index of grain size metamorphism that has occurred within the snowpack. TGI time series from 21 representative sites across the region and the corresponding SSM/I observations were used to develop an algorithm for snow depth that requires daily air temperatures. Copyright ?? 2002 John Wiley & Sons, Ltd.

Hydrological Processes↗