USGS Science⌕ Search

SEARCH · USGS Science

Results for “Earth and Space Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,660 records · Page 83Linked to original sources
USGS2024

Flood-inundation maps for the Cuyahoga River at Jaite, Ohio, 2024

Digital flood-inundation maps for a nearly 6-mile reach of the Cuyahoga River at Jaite, Ohio, were created by the U.S. Geological Survey (USGS) in cooperation with the Northeast Ohio Regional Sewer District Board of Trustees. The maps depict estimates of the extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage 04206425 on the Cuyahoga River at Jaite, Ohio. Water-surface profiles were computed for the stream reach by using a one-dimensional steady-state step-backwater model. The hydraulic model was calibrated to the current USGS streamgage data and then used to compute 15 water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from 6 to 20 feet, which correspond to below “action stage” to “major flood stage” as reported by the National Weather Service. The simulated water-surface profiles were then used with a geographic information system digital elevation model derived from light detection and ranging data to delineate the areas flooded at each stage. These maps, along with current stage data from the USGS streamgage and forecasted high-flow stages from the National Weather Service, can provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Ohio↗
USGS2026

Rapid hydrothermal triggering of induced seismicity at the Coso Geothermal Field

The long-term producing Coso Geothermal Field (CGF) in California operates over 100 wells tapping into a reservoir characterized by an extensive fracture network, complex fluid pathways, and regular seismic activity. Understanding the interaction between seismicity and injection can shed important light on the hydrothermal characteristics of the field. Here, we analyze 15 years of local seismic and daily operational data from the CGF, identifying a strong correlation between short-term increase in seismicity rate and seasonal volumetric and temperature variations in the reinjected fluid. Furthermore, the seismic footprint during peak injection of colder fluids reveals a near-instantaneous response up to 2 km away from the injection well, too rapid for pore pressure diffusion alone. This short-term and distant response is observed to have directional preference, indicating structural or permeability anisotropy within the reservoir. Additionally, the seismic response correlates with the initial volumetric increase of colder fluids, but also with temperature decrease during stable injection periods, suggesting thermal effects alone can play an important role in triggering distant seismicity.

California↗
USGS2024

Projections of multiple climate-related coastal hazards for the US Southeast Atlantic

Faced with accelerating sea level rise and changing ocean storm conditions, coastal communities require comprehensive assessments of climate-driven hazard impacts to inform adaptation measures. Previous studies have focused on flooding but rarely on other climate-related coastal hazards, such as subsidence, beach erosion and groundwater. Here, we project societal exposure to multiple hazards along the Southeast Atlantic coast of the United States. Assuming 1 m of sea level rise, more than 70% of the coastal residents and US \ $ 1 trillion in property are in areas projected to experience shallow and emerging groundwater, 15 times higher than daily flooding. Storms increase flooding exposure by an order of magnitude over daily flooding, which could impact up to ~50% of all coastal residents and US \ $ 770 billion in property value. The loss of up to ~80% of present-day beaches and high subsidence rates that currently affect over 1 million residents will exacerbate flooding and groundwater hazard risks.

Florida, Georgia, North Carolina, South Carolina, ↗
USGS2025

3D Converted wave reverse time migration imaging

We describe a newly developed method for recovering high-resolution images of seismic discontinuities, such as subducting slabs, in 3D. Our method makes use of converted S → P or P → S waves observed by dense arrays of seismometers to infer the locations and relative strengths of seismic discontinuities at depth in a target region. Observed direct and converted waves are backpropagated to their times of origin. The time-reversed wavefield is then separated into its constituent P and S components via the Helmholtz decomposition, and those separated wavefields are used to compute imaging functions that characterize the locations and relative strengths of seismic discontinuities. Imaging functions may be designed to use either S → P or P → S waves, so that users can target those arrivals expected to be most dominant in a given dataset. We have previously demonstrated the efficacy of our method in two dimensions, and we now present a 3D implementation of our technique which addresses the significant computational challenges posed by the size of volumetric wavefield data in three dimensions. Through a series of synthetic examples, we demonstrate that our method is capable of recovering the fine scale structure of a subducting slab given realistic station coverage and earthquake sources. We investigate optimal seismic station geometries for our technique and explore image interpretability in regions with poor data coverage. We find that linear station geometries yield more optimal, interpretable imaging functions than collections of small arrays can. We also show that our method can successfully recover bothS → P or P → S images when realistic shear earthquake sources are used, and we explore the additional computational challenges presented by the high frequency content of S waves. Our results demonstrate the potential for our technique to recover high-resolution information about subducting slabs in real-world regions, given that relatively sparse seismic arrays with only approximately 100 stations are capable of recovering interpretable imaging functions from just a few realistic earthquake sources for multiple discontinuities at significant depth in an area of approximately 400~sq~km.

Seismica↗
USGS2024

The impact of source time function complexity on stress drop estimates

Earthquake stress drop—a key parameter for describing the energetics of earthquake rupture—can be estimated in several different, but theoretically equivalent, ways. However, independent estimates for the same earthquakes sometimes differ significantly. We find that earthquake source complexity plays a significant role in why theoretically (for simple rupture models) equivalent methods produce different estimates. We apply time‐ and frequency‐domain methods to estimate stress drops for real earthquakes in the SCARDEC (Seismic source ChAracteristics Retrieved from DEConvolving teleseismic body waves, Vallée and Douet, 2016 ) source time function (STF) database and analyze how rupture complexity drives stress‐drop estimate discrepancies. Specifically, we identify two complexity metrics—Brune relative energy (BRE) and spectral decay—that parameterize an earthquake’s complexity relative to the standard Brune model and strongly correlate with the estimate discrepancies. We find that the observed systematic magnitude–stress‐drop trends may reflect underlying changes in STF complexity, not necessarily trends in actual stress drop. Both the decay and BRE parameters vary systematically with magnitude, but whether this magnitude–complexity relationship is real remains unresolved.

Bulletin of the Seismological Society of America↗
USGS2026

The role of groundwater in contributing to surface water salinization in the Upper Colorado River Basin

Freshwater salinization impacts the availability of water for human use and ecosystem needs worldwide. It has been estimated that total dissolved solids (TDS) in the Colorado River Basin cause $350 million/year in damages and substantial resources are devoted to reducing TDS loading to streams. This study describes the development and application of coupled watershed models that enable TDS source tracking through the subsurface and across the landscape at a seasonal timestep for 35 years in the Upper Colorado River Basin. Results indicate that, on average, 75% of TDS loading to streams originates as baseflow, and 50% of loading is lagged in delivery by longer than one season. Snowmelt was identified as a dominant process controlling the transport of lagged TDS to streams. This approach informs when and where TDS mitigation efforts may be effective in a watershed that serves as a critical water supply for the southwestern United States.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2026

Earthquake catalog for the Fairbanks region of central Alaska, 2014–2024, based on waveform cross-correlation

The Fairbanks region of central Alaska is part of a broad zone of intraplate crustal deformation, situated north of the Denali fault and north of the ongoing collision and flat‐slab subduction of the Yakutat oceanic plateau. Seismicity in the Fairbanks region occurs both in diffuse areas as well as in well‐defined lineaments, such as the left‐lateral Salcha fault, which hosted the 1937 M 8 7.3 earthquake. Starting with the regional seismicity catalog, we perform waveform cross‐correlation, network‐matched filtering, and relative relocation to obtain an enhanced seismicity catalog over the time period 2014–2024. Based on the relocated catalog, we interpret a set of 15 fault segments, including two conjugate faults and two new faults east of the previously documented fault system. Considering the combined seismicity in the Minto and Fairbanks regions, the median depth of seismicity decreases from east (6 km) to west (20 km). Our interpreted faults provide guidance for future tectonic modeling and assessment of seismic hazards in this region.

Alaska↗
USGS1999

Effects of snowmobile use on snowpack chemistry in Yellowstone National Park, 1998

Snowmobile use in Yellowstone National Park has increased substantially in the past three decades. In areas of greatest snowmobile use, elevated levels of by-products of gasoline combustion such as ammonium and benzene have been detected in snowpack samples. Annual snowpacks and snow-covered roadways trap deposition from local and regional atmospheric emissions. Snowpack samples representing most of the winter precipitation were collected at about the time of maximum annual snow accumulation at a variety of locations in the park to observe effects of a range of snowmobile traffic levels. Concentrations of organic and inorganic compounds in snow samples from pairs of sites located directly in and off snow-packed roadways used by snowmobiles were compared to concentrations in samples collected at nearby off-road sites. Concentrations of ammonium were 2 to 5 times higher for the in-road snow compared to off-road snow for each pair of sites. Thus, concentrations decreased rapidly with distance from roadways. In addition, concentrations of ammonium, nitrate, sulfate, benzene, and toluene in snow were positively correlated with snowmobile use.

Wyoming↗
USGS2026

Conventional hydrothermal power-producing systems of the Great Basin, USA

As part of the update to the electric-grade conventional hydrothermal assessment of the Great Basin, USA, Monte Carlo analyses of identified resources within explored regions will be performed to make estimates of discovered resources and associated uncertainty. Analyses use conditional statistics where estimates are conditioned upon a hydrothermal favorability map, allowing for the likelihood that more resources exist in regions of higher hydrothermal favorability. For these analyses, a dataset of identified hydrothermal systems is compiled, and the new compilation is described herein. Recognizing that a single hydrothermal system may be developed with multiple power plants, and that the hydrothermal upflow zone may be several kilometers across with many measurements characterizing a single hydrothermal system, a procedure was developed and employed to create clusters of points (power plants, measurements, etc.) that are associated with a single system, and a new central point was defined as the best estimator of the center of the hydrothermal system. Hydrothermal systems were uniquely identified by grouping electric-grade hydrothermal measurements and operating power plants within a distance of 10 km. Groups that are >10 km apart are assumed to be different electric-grade hydrothermal systems. While 10 km was used as the threshold, most systems were significantly further apart, and most points within groups were typically within 5 km of each other. A well measurement was considered an electric-grade measurement of a hydrothermal system if it had two properties: a measured temperature of >85 °C and evidence of hydrothermal convection. Other points that were added to the dataset are locations of operating powerplants or locations that have been classified as an electric-grade hydrothermal resource by either the U.S Geological Survey (USGS) or the Great Basin Center for Geothermal Energy. After all points are assigned to systems, new points were computed with the goal of identifying the center of the throat of the hydrothermal upflow zone. If operating powerplants exist for a system, then the arithmetic average of all power plant locations is used. Otherwise, if USGS made an estimate, that location is used. In the absence of both powerplants or USGS estimates, the arithmetic average of all electric-grade measurement locations is used. An example is shown of how these newly compiled locations might be ranked for uncertainty analyses, where higher confidence is assumed if measured temperature is higher and there are many supporting measurements indicating an electric-grade resource. In summary, 28 systems have operating power plants, an additional 78 systems are known identified electric-grade hydrothermal resources, and 99 new systems were identified as probable electric-grade systems with varying levels of confidence. These 205 locations are shown as a function of a recent hydrothermal favorability map, conceptually illustrating the conditional statistics that can be used to make estimates of the undiscovered resources of the Great Basin. An accompanying data release provides summaries of developed capacity by system and USGS estimates of likely total capacity and associated uncertainty.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2024

Trimming the UCERF3-TD logic tree: Model order reduction for an earthquake rupture forecast considering loss exceedance

The Uniform California Earthquake Rupture Forecast version 3-Time Dependent depicts California’s seismic faults and their activity. Its logic tree has 5760 leaves. Considering 30 more model combinations related to ground motion produces 172,800 distinct models representing so-called epistemic uncertainties. To calculate risk to a portfolio of buildings, one also considers millions of earthquakes and spatially correlated ground-motion variability. We offer a tree-trimming technique that retains the probability distribution of portfolio loss and identifies the leading sources of uncertainty for further study. We applied it to a California statewide building portfolio and various levels of nonexceedance probability between one in 100 and one in 2500. We trimmed the logic tree from 172,800 leaves to as few as 15. The result: a supercomputer that would otherwise run 24 h to estimate the distribution of one-in-250-year loss can calculate it in moments with the reduced-order model. Others can use the reduced-order model to calculate risk to different California portfolios, and scientists can prioritize study to reduce the remaining epistemic uncertainty.

Earthquake Spectra↗
USGS2025

Statewide cumulative human health risk assessment of inorganics-contaminated groundwater wells, Montana, USA

Across the United States, rural residents rely on unregulated and generally unmonitored private wells for drinking water, which may pose serious health risks due to unrecognized contaminants. We assessed the nature, degree, and spatial distribution of cumulative health risks from inorganic contaminants in groundwater. Our analysis included nearly 84,000 data points from 6500+ wells, across 51 of Montana's 98 watersheds, using a public groundwater database. We compared a drinking water screening level cumulative risk assessment (CRA) for inorganics based on the U.S. Environmental Protection Agency (EPA) protective health thresholds (Maximum Contaminant Level Goals, Health Advisories [MCLG-HAs]) to a CRA based on EPA public supply enforceable Maximum Contaminant Levels (MCLs). Based on median concentrations of 19 inorganics (antimony, arsenic, barium, beryllium, boron, cadmium, chromium, copper, fluoride, manganese, molybdenum, nickel, nitrate, lead, selenium, strontium, thallium, uranium, zinc), 75% of watersheds had MCLG-HA-based cumulative risk values > 1.0; arsenic and uranium contributed the most risk, followed by strontium, fluoride, manganese and boron. Hence, this screening level (Tier I) CRA indicated widespread potential for unrecognized human health risk to private well users from inorganic contaminants considering both carcinogenic and non-carcinogenic risks. Sensitivity analysis showed that benchmarks applied (MCLG-HAs versus MCLs) exerted the largest control on results. Our findings identify priority regions for Tier 2 risk assessments to elucidate local sources and distributions of geogenic versus anthropomorphic contaminants. Our study is the first statewide assessment of cumulative health risk from groundwater that we are aware of, and results support increased statewide drinking water education and testing to reduce human health risks from contaminated private well water.

Montana↗
USGS1976

Effect of deicing chemicals on the hydrologic environment in Massachusetts; evaluation of surface-water data collection

The objective of this study is to develop predictive relationships that can be used to describe the impact of highway deicing salts on the hydrologic environment. A method, presented in an earlier report, for estimating yearly mean chloride concentrations from estimated or actual runoff and salt-application data was applied to the period 1971 through1974 and the results compared with yearly mean chloride concentrations computed from records of specific conductance. Estimates were found to be from minus 63 percent to plus 56 percent in error when the error was expressed as the difference between estimated and computed values as a percentage of the computed values. Chloride concentrations used in this study are computed from specific conductance/chloride concentration relationships and records of specific conductance. Preliminary results from graphic analyses and least-squares regression analysis show that relationships between measured values of specific conductance and chloride concentration have correlation coefficients ranging from 0.30 to 0.97. Analysis of streamflow for all major dissolved constituents is recommended with the purpose of attempting to describe the variations in the specific conductance/chloride concentration relationships.

Massachusetts↗
USGS2026

Rupture into slow-slip fault regime during the 2018 Mw 6.9 Island of Hawaiʻi earthquake is followed by modest postseismic slip

On 4 May 2018, a M w 6.9 earthquake occurred on the south flank of Kīlauea, in the midst of an historic event that included a voluminous eruption from Kīlauea’s lower East Rift zone and caldera collapse at its summit. The earthquake was a consequence of both short‐ and long‐term stress buildup due to magmatic activity associated with the eruption and steady flank motion, respectively, and it revealed features of Kīlauea’s décollement fault that can inform understanding of future earthquake activity. We used geodetic data to determine the distributions of slip during the coseismic and postseismic periods and compared these with areas of known fault slip during past earthquakes and slow‐slip events (SSEs). The 2018 earthquake ruptured into an area of the décollement fault that was active during quasi‐regular SSEs that occurred in the two decades prior to 2018 but that have not been observed since. The coseismic slip model indicates that the amount of motion on the décollement fault was several times greater than what typically occurred during SSEs, suggesting that it may take decades for the fault to rebuild stress to the point at which SSEs will occur again. Postseismic afterslip also occurred in an area of the fault known to experience slow slip; however, unlike at other creeping faults, postseismic afterslip was rapid, being largely over within 2–3 days. The rapid nature and small magnitude of the postseismic afterslip may be due to the lack of a viscoelastic relaxation component, which is possibly a result of the shallow dip of the décollement fault not transferring stress efficiently into the lower crust.

Hawaii↗
USGS2025

Igneous differentiation in arcs

This chapter assesses crystallization-differentiation of convergent-margin magmas both from the standpoints of natural rock suites and from laboratory phase-equilibrium experiments. Crystallization-differentiation of dry subalkaline and alkaline basalts are summarized at the beginning for reference and context. Experiments crystallizing arc basalts through andesites at middle to upper crustal pressures (100–400 MPa), saturated either with H 2 O or mixed H 2 O-CO 2 , produce liquid lines of descent similar to arc igneous suites, with higher f O 2 s giving results closer to calc-alkaline magma series. Early enrichment of melts in SiO 2 with little or no enrichment in FeO* (total Fe as FeO) comes about by the combined effects of H 2 O suppressing crystallization of plagioclase relative to olivine, shifting plagioclase to more calcic – therefore lower SiO 2 – compositions, and suppressing silicate minerals to greater extents than Fe-rich spinel. Also contributing to SiO 2 enrichment is crystallization near the liquidus of higher proportions of olivine relative to calcic clinopyroxene, compared with MORB, but it is unclear if this is brought about by H 2 O or elevated pressure. Exhumed arc terranes, however, generally fail to expose evidence for primitive liquids having reached and differentiated at middle to upper crustal depths, at least in any abundance. Instead, most differentiation in arcs appears to take place in the lower crust or near the crust-mantle transition, and although hydrous experiments at such pressures produce liquids broadly similar to arc suites in their SiO 2 enrichment, the experimental liquids differ in becoming peraluminous at early stages of differentiation while melts have basaltic, basaltic andesitic, or andesitic SiO 2 concentrations. Crystallization of abundant calcic clinopyroxene close to the liquidus causes the high-pressure experimental liquids to become peraluminous with only small increases in SiO 2 concentration. In contrast, natural arc volcanic and plutonic suites become gradually less metaluminous with increasing SiO 2 , crossing to peraluminous at dacitic to rhyolitic SiO 2 concentrations. Hybridism, encompassing magma-mixing, assimilation of old crust, and incorporation of near-solidus melts from only shortly older deep, antecedent arc intrusions may accompany natural crystallization-differentiation, preventing melts from attaining peraluminous compositions at low-SiO 2 concentrations. If so, then nearly all arc suites are to substantial extents composites, rather than preserving simple, progressive liquid lines of descent. Some comments and assessments are also made on the participation of garnet in arc differentiation and on the production of arc batholiths.

Book chapter↗
USGS2024

Estimating domestic self-supplied water use in Rhode Island, 2014–21

Water withdrawal from private groundwater wells is often unaccounted for in water planning studies, and water from private wells can be a source of exposure to environmental contaminants. The sizes of populations that depend on private wells for domestic water use and the amounts of water that are withdrawn from these wells are generally poorly represented in data collection efforts because of the challenges of locating, metering, or gathering withdrawal information from individual property owners. To address this problem, the U.S. Geological Survey, in cooperation with the Rhode Island Water Resources Board, estimated the volume of water withdrawn from domestic self-supply wells and the populations who use them for the State of Rhode Island at a 30-meter pixel spatial resolution and one-month temporal resolution between July 2014 and June 2021. The number of people reliant on domestic self-supply wells has increased in Rhode Island over the study period; however, the statewide estimate of total water withdrawal has not statistically increased. Withdrawals from private wells are largest in the inland areas of the western part of the State, and the towns of Scituate and Charlestown have the highest estimated withdrawals. Statewide monthly withdrawals ranged from 3.987 million gallons per day in March 2018 to 7.767 million gallons per day in September 2016. The median per capita domestic water use rate was 46.0 gallons per capita per day.

Rhode Island↗
USGS2026

Cruise summary—Samoa Basin abyssal mapping—Box coring leg, Pago Pago, Territory of American Samoa to Pago Pago, American Samoa, April 11– May 1, 2026

Expedition Summary U.S. Geological Survey scientists led a box coring effort to the Samoa Basin to characterize minerals and the surrounding abyssal sediments and fauna. Thirty-eight box cores were deployed between April 13, 2026, and April 28, 2026. Thirty-six box cores recovered sufficient material to determine nodule density, and 35 recovered sufficient material for subcores to be collected. The purpose of this Data Report is to provide a summary of samples collected, initial results that were obtained shipboard, and briefly mention planned future analyses from this expedition.

Data Report↗
USGS2025

Footprints of past mining in Alaska (USA) derived from high-resolution satellite imagery

Mapping the land area used for mining in the past is essential for guiding the remediation of affected landscapes and assessing the resource potential of related waste products. Despite significant recent progress delineating footprints of active and inactive mining globally, the known inventory of such mine lands remains incomplete. Here, I describe a new map dataset of footprints of land surface disturbance and waste at sites of past mining in Alaska (USA) based on visual interpretation of satellite imagery. This dataset maps 6–14 times the area of previous regional and global mine footprint maps in Alaska and is the first in the region to explicitly delineate mine waste landforms (e.g., tailings piles). The data are publicly available from the U.S. Geological Survey under a “no rights reserved” Creative Commons (CC0) license agreement.

Alaska↗
USGS2024

Separating signals in elevation data improves supervised machine learning predictions for hydrothermal favorability

A recent study identified topography (land surface elevation above sea level) as an important input dataset (feature) for predicting the location of hydrothermal systems in the Great Basin in Nevada. Yet, topography is generally a result of more than one geological process and may consequently contain multiple distinct signals. For example, the geologic evolution of the Great Basin has produced both crustal thickening (i.e., regional-scale trends in elevation) and thinning via Basin and Range extensional faulting (i.e., valley-scale topographic relief). We postulate that these geologic processes may affect the occurrence of hydrothermal systems differently. Therefore, we separate the regional trend from the valley-scale signal in the Great Basin, and then use them separately to evaluate the importance of each as predictors for hydrothermal favorability. Our prior work applying supervised machine learning (ML) using the data from the Nevada Machine Learning Project demonstrated that employing a training strategy that randomly selects negative training sites produces better performing models for predicting hydrothermal favorability than a training strategy that uses expert-selected negatives. The models created using both training strategies exhibited a west-east geographic trend in the predictions for the favorability of hydrothermal resources. These models generally predicted higher favorability in western Nevada and lower favorability in eastern Nevada. This west-east trend in predicted favorability correlates with elevation across the Great Basin, which trends higher from west to east. By separating the original elevation feature into distinct features for elevation trend (i.e., regional-scale topography) and detrended elevation (i.e., valley-scale or local relative topography), we find that models using the separated topographic signals consistently outperform competing models that use the original elevation feature. Although western Nevada still exhibits higher favorability than eastern Nevada, using separated signals for regional elevation and local structure reduces the west-east prediction trend in the region and emphasizes structures associated with hydrothermal upflow. This work emphasizes how carefully engineering features to represent geological conditions relevant to hydrothermal systems allows ML algorithms to detect important patterns for predicting hydrothermal resource favorability and leads to better model performance.

Conference Paper↗