USGS Science⌕ Search

SEARCH · USGS Science

Results for “Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources

Statistical analysis and mapping of water levels in the Biscayne aquifer, water conservation areas, and Everglades National Park, Miami-Dade County, Florida, 2000–2009

Statistical analyses and maps representing mean, high, and low water-level conditions in the surface water and groundwater of Miami-Dade County were made by the U.S. Geological Survey, in cooperation with the Miami-Dade County Department of Regulatory and Economic Resources, to help inform decisions necessary for urban planning and development. Sixteen maps were created that show contours of (1) the mean of daily water levels at each site during October and May for the 2000–2009 water years; (2) the 25th, 50th, and 75th percentiles of the daily water levels at each site during October and May and for all months during 2000–2009; and (3) the differences between mean October and May water levels, as well as the differences in the percentiles of water levels for all months, between 1990–1999 and 2000–2009. The 80th, 90th, and 96th percentiles of the annual maximums of daily groundwater levels during 1974–2009 (a 35-year period) were computed to provide an indication of unusually high groundwater-level conditions. These maps and statistics provide a generalized understanding of the variations of water levels in the aquifer, rather than a survey of concurrent water levels. Water-level measurements from 473 sites in Miami-Dade County and surrounding counties were analyzed to generate statistical analyses. The monitored water levels included surface-water levels in canals and wetland areas and groundwater levels in the Biscayne aquifer. Maps were created by importing site coordinates, summary water-level statistics, and completeness of record statistics into a geographic information system, and by interpolating between water levels at monitoring sites in the canals and water levels along the coastline. Raster surfaces were created from these data by using the triangular irregular network interpolation method. The raster surfaces were contoured by using geographic information system software. These contours were imprecise in some areas because the software could not fully evaluate the hydrology given available information; therefore, contours were manually modified where necessary. The ability to evaluate differences in water levels between 1990–1999 and 2000–2009 is limited in some areas because most of the monitoring sites did not have 80 percent complete records for one or both of these periods. The quality of the analyses was limited by (1) deficiencies in spatial coverage; (2) the combination of pre- and post-construction water levels in areas where canals, levees, retention basins, detention basins, or water-control structures were installed or removed; (3) an inability to address the potential effects of the vertical hydraulic head gradient on water levels in wells of different depths; and (4) an inability to correct for the differences between daily water-level statistics. Contours are dashed in areas where the locations of contours have been approximated because of the uncertainty caused by these limitations. Although the ability of the maps to depict differences in water levels between 1990–1999 and 2000–2009 was limited by missing data, results indicate that near the coast water levels were generally higher in May during 2000–2009 than during 1990–1999; and that inland water levels were generally lower during 2000–2009 than during 1990–1999. Generally, the 25th, 50th, and 75th percentiles of water levels from all months were also higher near the coast and lower inland during 2000–2009 than during 1990–1999. Mean October water levels during 2000–2009 were generally higher than during 1990–1999 in much of western Miami-Dade County, but were lower in a large part of eastern Miami-Dade County.

Florida↗

Flood-inundation maps for the Green River in Colrain, Leyden, and Greenfield, Massachusetts, from U.S. Geological Survey streamgage 01170100 Green River near Colrain to the confluence with the Deerfield River

The U.S. Geological Survey developed flood elevations in cooperation with the Federal Emergency Management Agency for a 14.3-mile reach of the Green River in Colrain, Leyden, and Greenfield, Massachusetts, to assist landowners and emergency management workers to prepare for and recover from floods. The river reach extends from the U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage downstream to the confluence with the Deerfield River. A series of seven digital flood inundation maps were developed for the upper 4.4 miles of the river reach downstream from the stream. Flood discharges corresponding to the 50-, 10-, 1-, and 0.2-percent annual exceedance probabilities were computed for the reach from updated flood-frequency analyses. These peak flows and the flood flows associated with the stages of 10.2, 12.4, and 14.4 feet (ft) at the Green River streamgage were routed through a one-dimensional step-backwater hydraulic model to obtain the corresponding peak water-surface elevations and to place the Tropical Storm Irene flood of August 28, 2011 (stage 13.97 ft), into historical context. The hydraulic model was calibrated by using the current (2015) stage-discharge relation at the U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage and from documented high-water marks from the Tropical Storm Irene flood, which had a flow higher than a 0.2-percent annual exceedance probability flood discharge. The hydraulic model was used to compute water-surface profiles for flood stages referenced to the streamgage and ranging from the 50-percent annual exceedance probability (bankfull flow) at 7.6 ft (439.8 ft above the North American Vertical Datum of 1988 [NAVD 88]) to 14.4 ft (446.7 ft NAVD 88), which exceeds the maximum recorded water level of 13.97 ft (Tropical Storm Irene) at the streamgage. The mapped stages of 7.6 to 14.4 ft were selected to match the stages for bankfull; the 50-, 10-, 1-, and 0.2-percent annual exceedance probabilities; incremental stages of 10.2 and 12.4 ft; and the maximum stage of the stage-discharge rating curve. The simulated water-surface profiles were combined with a geographic information system digital elevation model derived from light detection and ranging (lidar) data having a 0.5-ft vertical accuracy to create a set of flood-inundation maps. The availability of the flood-inundation maps, combined with information regarding near real-time stage from U.S. Geological Survey Green River near Colrain, MA (01170100) streamgage, can provide emergency management personnel and residents with information that is critical for flood response activities, such as evacuations and road closures, and postflood recovery efforts. The flood-inundation maps are nonregulatory but provide Federal, State, and local agencies and the public with estimates of the potential extent of flooding during selected peak-flow events.

Massachusetts↗

Flood-inundation map library for the Licking River and South Fork Licking River near Falmouth, Kentucky

Digital flood inundation maps for a 17-mile reach of Licking River and 4-mile reach of South Fork Licking River near Falmouth, Kentucky, were created by the U.S. Geological Survey (USGS) in cooperation with Pendleton County and the U.S. Army Corps of Engineers–Louisville District. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://wim.usgs.gov/FIMI/FloodInundationMapper.html , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Licking River at Catawba, Ky., (station 03253500) and the USGS streamgage on the South Fork Licking River at Hayes, Ky., (station 03253000). Current conditions (2015) for the USGS streamgages may be obtained online at the USGS National Water Information System site ( http://waterdata.usgs.gov/nwis ). In addition, the streamgage information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood warning system ( http:/water.weather.gov/ahps/ ). The flood hydrograph forecasts provided by the NWS are usually collocated with USGS streamgages. The forecasted peak-stage information, also available on the NWS Web site, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. In this study, flood profiles were computed for the Licking River reach and South Fork Licking River reach by using a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current (2015) stage-discharge relations for the Licking River at Catawba, Ky., and the South Fork Licking River at Hayes, Ky., USGS streamgages. The calibrated model was then used to calculate 60 water-surface profiles for a sequence of flood stages, at 2-foot intervals, referenced to the streamgage datum and ranging from an elevation near bankfull to the elevation associated with a major flood that occurred in the region in 1997. To delineate the flooded area at each interval flood stage, the simulated water-surface profiles were combined with a digital elevation model of the study area by using geographic information system software. The availability of these flood inundation maps for Falmouth, Ky., along with online information regarding current stages from the USGS streamgages and forecasted stages from the NWS, provides emergency management personnel and local residents with information that is critical for flood response activities such as evacuations, road closures, and post-flood recovery efforts.

Kentucky↗

Flood-inundation maps for the Yellow River at Plymouth, Indiana

Digital flood-inundation maps for a 4.9-mile reach of the Yellow River at Plymouth, Indiana (Ind.), were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 05516500, Yellow River at Plymouth, Ind. Current conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the Internet at http://waterdata.usgs.gov/in/nwis/uv?site_no=05516500 . In addition, information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood-warning system ( http:/water.weather.gov/ahps/ ). The NWS AHPS forecasts flood hydrographs at many sites that are often collocated with USGS streamgages, including the Yellow River at Plymouth, Ind. NWS AHPS-forecast peak-stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood and forecasts of flood hydrographs at this site. For this study, flood profiles were computed for the Yellow River reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the current stage-discharge relations at the Yellow River streamgage, in combination with the flood-insurance study for Marshall County (issued in 2011). The calibrated hydraulic model was then used to determine eight water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The 1-percent annual exceedance probability flood profile elevation (flood elevation with recurrence intervals within 100 years) is within the calibrated water-surface elevations for comparison. The simulated water-surface profiles were then used with a geographic information system (GIS) digital elevation model (DEM, derived from Light Detection and Ranging [lidar]) in order to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage from the USGS streamgage 05516500, Yellow River at Plymouth, Ind., and forecast stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Indiana↗

Development of a hydraulic model and flood-inundation maps for the Wabash River near the Interstate 64 Bridge near Grayville, Illinois

A two-dimensional hydraulic model and digital flood‑inundation maps were developed for a 30-mile reach of the Wabash River near the Interstate 64 Bridge near Grayville, Illinois. The flood-inundation maps, which can be accessed through the U.S. Geological Survey (USGS) Flood Inundation Mapping Science web site at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Wabash River at Mount Carmel, Ill (USGS station number 03377500). Near-real-time stages at this streamgage may be obtained on the internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) at http://water.weather.gov/ahps/ , which also forecasts flood hydrographs at this site (NWS AHPS site MCRI2). The NWS AHPS forecasts peak stage information that may be used with the maps developed in this study to show predicted areas of flood inundation. Flood elevations were computed for the Wabash River reach by means of a two-dimensional, finite-volume numerical modeling application for river hydraulics. The hydraulic model was calibrated by using global positioning system measurements of water-surface elevation and the current stage-discharge relation at both USGS streamgage 03377500, Wabash River at Mount Carmel, Ill., and USGS streamgage 03378500, Wabash River at New Harmony, Indiana. The calibrated hydraulic model was then used to compute 27 water-surface elevations for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from less than the action stage (9 ft) to the highest stage (35 ft) of the current stage-discharge rating curve. The simulated water‑surface elevations were then combined with a geographic information system digital elevation model, derived from light detection and ranging data, to delineate the area flooded at each water level. The availability of these maps, along with information on the internet regarding current stage from the USGS streamgage at Mount Carmel, Ill., and forecasted stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Illinois↗

Flood-inundation maps for the Wabash River at Lafayette, Indiana

Digital flood-inundation maps for an approximately 4.8-mile reach of the Wabash River at Lafayette, Indiana (Ind.) were created by the U.S. Geological Survey (USGS) in cooperation with the Indiana Office of Community and Rural Affairs. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science web site at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at USGS streamgage 03335500, Wabash River at Lafayette, Ind. Current streamflow conditions for estimating near-real-time areas of inundation using USGS streamgage information may be obtained on the internet at https://waterdata.usgs.gov/in/nwis/uv?site_no=03335500 . In addition, information has been provided to the National Weather Service (NWS) for incorporation into their Advanced Hydrologic Prediction Service (AHPS) flood-warning system ( https://water.weather.gov/ahps/ ). The NWS AHPS forecasts flood hydrographs at many places that are often colocated with USGS streamgages, including the Wabash River at Lafayette, Ind. NWS AHPS-forecast peak-stage information may be used with the maps developed in this study to show predicted areas of flood inundation. For this study, flood profiles were computed for the Wabash River reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the most current stage-discharge relations at USGS streamgage 03335500, Wabash River at Lafayette, Ind., and high-water marks from the flood of July 2003 (U.S. Army Corps of Engineers [USACE], 2007). The calibrated hydraulic model was then used to determine 23 water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from bankfull to the highest stage of the current stage-discharge rating curve. The simulated water-surface profiles were then combined with a geographic information system digital elevation model derived from light detection and ranging to delineate the area flooded at each water level. The availability of these maps, along with internet information regarding current stage from the USGS streamgage 03335500, Wabash River at Lafayette, Ind., and forecasted high-flow stages from the NWS AHPS, will provide emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, and for postflood recovery efforts.

Indiana↗

Hydraulic modeling and flood-inundation mapping for the Huron River and Ore Lake Tributary, Livingston County, Michigan

Digital flood-inundation maps for an 8-mile (mi) reach of the Huron River near Hamburg, Michigan (station number 04172000), from downstream of Rickett Road to Strawberry Lake, were created by the U.S. Geological Survey (USGS), in cooperation with Green Oak and Hamburg Townships, Michigan, and the U.S. Army Corps of Engineers. The flood-inundation maps also include a 1.16-mi reach of the Ore Lake Tributary until it joins the Huron River, approximately 2.22 mi downstream of Rickett Road. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at http://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the Huron River near Hamburg, Michigan (station number 04172000). Near real-time stages at this streamgage may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/ . The NWS Advanced Hydrologic Prediction Service also provides forecasted flood hydrographs at this website. Flood profiles were computed for the stream reach by means of a one-dimensional step-backwater model. The hydraulic model was calibrated by using the current stage-discharge relation at the Huron River near Hamburg, Mich., streamgage and was calibrated to water levels determined with stage sensors (pressure transducers) temporarily deployed along the stream reach. The hydraulic model was used to compute a set of water-surface profiles for flood stages ranging from 7.0 to 10.5 feet (ft). This range represents stages just above 6.0 (bankfull) to 2.04 ft above the maximum recorded stage at the USGS streamgage on the Huron River near Hamburg, Mich. (station number 04172000). The computed water-surface profiles were then combined with a Geographic Information System digital elevation model (derived from light detection and ranging [lidar] data having a 0.49-ft vertical accuracy and 3.8-ft horizontal resolution) to delineate the area flooded at each water level. The availability of these maps, along with Internet information regarding current stage and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information critical for flood-response activities such as evacuations, road closures, and postflood recovery efforts.

Michigan↗

Flood-inundation maps for the North Fork Kentucky River at Hazard, Kentucky

Digital flood-inundation maps for a 7.1-mile reach of the North Fork Kentucky River at Hazard, Kentucky (Ky.), were created by the U.S. Geological Survey (USGS) in cooperation with the Kentucky Silver Jackets and the U.S. Army Corps of Engineers Louisville District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science website at https://water.usgs.gov/osw/flood_inundation/ , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage on the North Fork Kentucky River at Hazard, Ky. (USGS station number 03277500). Near-real-time stages at this streamgage may be obtained on the internet from the USGS National Water Information System at https://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) at https://water.weather.gov/ahps/ , which also forecasts flood hydrographs at this site (NWS AHPS site HAZK2). NWS AHPS forecast peak stage information may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. Flood profiles were computed for the North Fork Kentucky River reach by means of a one-dimensional, step-backwater model developed by the U.S. Army Corps of Engineers. The hydraulic model was calibrated by using the current stage-discharge relation (USGS rating no. 24.0) at USGS streamgage 03277500, North Fork Kentucky River at Hazard, Ky. The calibrated hydraulic model was then used to compute 26 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from approximately bankfull (14 ft) to the highest even-foot increment stage (39 ft) of the current stage-discharge rating curve. The simulated water-surface profiles were then combined with a geographic information system digital elevation model, derived from light detection and ranging data, to delineate the area flooded at each water level. The availability of these maps, along with information on the internet regarding current stage from the USGS streamgage at North Fork Kentucky River at Hazard, Ky., and forecasted stream stages from the NWS AHPS, provides emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for postflood recovery efforts.

Kentucky↗

Flood-inundation maps for the Amite and Comite Rivers from State Highway 64 to U.S. Highway 190 at Central, Louisiana

Flood-inundation maps for a 14.5-mile reach of the Amite River and a 20.2-mile reach of the Comite River from State Highway 64 to U.S. Highway 190 were created by the U.S. Geological Survey (USGS) in cooperation with the City of Central, Louisiana. These maps, which can be accessed through an interactive mapper at the USGS Flood Inundation Mapping Program website and from a companion USGS data release, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgages Amite River at Magnolia, La., (07377300) and Comite River near Comite, La. (07378000). Flood profiles were computed for the Amite and Comite River reaches by using the two-dimensional (2D), finite-volume numerical modeling options in the U.S. Army Corps of Engineers Hydrologic Engineering Center’s River Analysis System (USACE HEC-RAS) software version 5.0.3. Models were calibrated to the current (2018) stage-discharge relations at the Amite River at Magnolia, La., and Comite River near Comite, La., streamgages, water-surface profiles from the March and August 2016 floods, and documented high-water marks from the flood of August 2016. The hydraulic models were used to compute 37 individual water-surface profiles (21 for the Amite River and 16 for the Comite River) at 1.0-foot intervals ranging from the National Weather Service flood stage to the highest peak on record at the two streamgages. The 37 simulated water-surface profiles were used with a light detection and ranging-derived digital elevation model to delineate the flood extent and associated depth at each water level. The delineated areas (inundation maps) were merged into 127 combinations or possible flooding scenarios based on annual peak stage information from the two streamgaging stations. The availability of these maps, along with real-time data delivered via the internet, will provide emergency management personnel and residents with information that is critical for flood-response activities such as evacuations and road closures, as well as for recovery efforts after floods.

Louisiana↗

Estimating potential wetland extent along selected river reaches in Indiana using streamflow statistics and flood-inundation mapping techniques

In this study potential wetland extents were estimated for 12 river reaches covering about 750 river miles in Indiana and parts of Illinois and Ohio. The study was completed by the U.S. Geological Survey in cooperation with the U.S. Department of Agriculture, Natural Resources Conservation Service. This study follows and adds to the work completed in a pilot study and determines that potential wetland extents can be estimated using streamflow statistics, streamgage data, and flood-inundation mapping techniques. The study was designed to assist in the Agricultural Conservation Easement Program. The Agricultural Conservation Easement Program is a voluntary program administered by the Natural Resources Conservation Service that provides technical and financial assistance to private landowners and Tribes to restore, protect, and enhance wetlands in exchange for retiring eligible land from agriculture. For a site to be eligible for wetland restoration, it should be in a zone with sustained or frequent flooding. This study calculated the flows that lasted for a period of 7 consecutive days on average at least once every 2 years (a value termed the “7MQ2”) for all the U.S. Geological Survey streamgages within the selected river reaches. These 7MQ2 flows were related to the stage-discharge tables for each streamgage, and a corresponding water-surface elevation was determined. Maps of estimated wetland extent were prepared using the 7MQ2 inundation elevation data in conjunction with bare-earth land-surface elevation data made publicly available through the online geospatial data clearinghouses of Indiana, Illinois, and Ohio. Flood-inundation mapping techniques were applied with the aid of geographic information system software to generate water-surface planes that represent inundation elevations associated with the 7MQ2 streamflow. Land-surface elevation data from high-resolution digital elevation models were subtracted from the water-surface planes to produce maps of wetland extent. The 12 map products, including datasets and geoprocessing tools, produced from this study will aid the National Resources Conservation Service and its partners with the onsite inundation-zone verification in agricultural land for potential restoration.

Illinois, Indiana, Ohio↗

A system design for implementing advanced feature descriptions for a map knowledge base

A prototype system to explore Linked Data that semantically integrates geospatial data in various formats from different publication sources with data from The National Map of the U.S. Geological Survey is presented. The focus is on accessing advanced feature descriptions for data from The National Map with data coreferenced from other sources. The prototype uses Geoserver to access The National Map data, which are converted to Resource Description Framework triples using Karma and stored in the Marmotta triplestore. Marmotta uses a Postgres relational database as a backend for the project and queries to the Marmotta triplestore are converted to structured query language and executed by Postgres. Triples retrieved are linked with same_as relationships to external data sources. The links to these sources provide additional attributes and relationships of the data from The National Map. Visualization of the results is provided using Leaflet and workflows for all parts of the system are defined. A use case for the system is provided to access structures and names information from The National Map for the Washington, D.C., area and link these to Geonames data, with visualization of the graphical and tabular results.

Scientific Investigations Report↗

Flood-inundation maps for the Blue River near Red Bridge Road, Kansas City, Missouri, 2019

Digital flood-inundation maps for a 4.6-mile reach of the Blue River near Red Bridge Road in Kansas City, Missouri, were created by the U.S. Geological Survey (USGS), in cooperation with the City of Kansas City, Missouri. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage 06893195, Blue River at Red Bridge Road, Kansas City, Mo. Near-real-time stages at this streamgage may be obtained from the USGS National Water Information System at https://doi.org/10.5066/F7P55KJN or the Johnson County, Kansas, StormWatch Automated Local Elevation in Real Time Flood Warning System at https://www.stormwatch.com . Flood profiles were computed for the Blue River reach by means of a one-dimensional model for simulating water-surface profiles with steady-state flow computations. The model was calibrated by using the current stage-streamflow relations at the upstream USGS streamgage 06893150, Blue River at Blue Ridge Boulevard Extension, Kansas City, Mo., and the downstream streamgage 06893500, Blue River at Kansas City, Mo. The hydraulic model was then used to compute 37 water-surface profiles for flood stages at 1-foot (ft) intervals referenced to the streamgage datum and ranging from 11 ft, or near bankfull, to 47 ft at the reference streamgage 06893195. The upper stage for the map library exceeds the stage corresponding to the estimated 0.2-percent annual exceedance probability flood (500-year recurrence interval flood) in the model reach. The simulated water-surface profiles were then combined with a geographic information system digital elevation model with a maximum 10-centimeter vertical root mean square error and 4.0-ft horizontal resolution to delineate the area flooded at each water level. The availability of these maps, along with real-time internet information regarding current stage from the USGS streamgage, will help guide emergency management personnel and residents in flood mitigation, preparedness and planning, flood-response activities such as evacuations and road closures, and any postflood recovery efforts.

Kansas, Missouri↗

Precipitation-driven flood-inundation mapping of the Little Blue River at Grandview, Missouri

The U.S. Geological Survey (USGS), in cooperation with the City of Grandview, Missouri, assessed flooding of the Little Blue River at Grandview resulting from varying precipitation magnitudes and durations and expected land-cover changes. The precipitation scenarios were used to develop a library of flood-inundation maps that included a 3.5-mile reach of the Little Blue River and tributaries within and adjacent to the city. A hydrologic model of the upper Little Blue River Basin and a hydraulic model of a selected study reach of the Little Blue River and tributaries were constructed to assess streamflow magnitudes associated with simulated precipitation amounts and the resulting flood-inundation conditions. The U.S. Army Corps of Engineers Hydrologic Engineering Center-Hydrologic Modeling System (HEC–HMS; version 4.4.1) was used to simulate the amount of streamflow produced from a range of rain events. The Hydrologic Engineering Center-River Analysis System (HEC–RAS; version 5.0.7) was then used to construct a steady-state hydraulic model to map resulting areas of flood inundation. Both models were calibrated to the May 28, 2020, high-flow event that produced a peak streamflow approximating a 10-percent annual exceedance probability (10-year flood-frequency recurrence interval) at the Little Blue River at Grandview streamgage (USGS station 06893750). The calibrated HEC–HMS model was used to simulate streamflows from design rainfall events of 1- to 8-hour durations and ranging from a 100- to 0.2-percent annual exceedance probability. Flood-inundation maps were produced for USGS streamflow stages of 17.0 feet (ft), or near bankfull, to 23.0 ft, or a stage exceeding the 0.2-percent annual exceedance interval flood, using the HEC–RAS model. The consequence of each precipitation duration-frequency value was represented by a 1-ft increment inundation map based on the generated peak streamflow from that rainfall event and the corresponding stage at the reference USGS streamgage. Four scenarios were developed with the HEC–HMS hydrologic model: (1) current (2016) land cover, normal antecedent soil-moisture conditions; (2) current land cover, wet antecedent soil-moisture conditions; (3) future land cover, normal antecedent soil-moisture conditions; and (4) future land cover, wet antecedent soil-moisture conditions. The future land-cover condition was estimated based on anticipated development in the basin. All precipitation scenarios were input into each of the four land-cover antecedent moisture conditions and then assigned to a resulting flood-inundation map based on the generated peak flow and corresponding stage at the reference streamgage.

Missouri↗

Precipitation-driven flood-inundation mapping of Muddy Creek at Harrisonville, Missouri

The U.S. Geological Survey, in cooperation with the city of Harrisonville, Missouri, assessed flooding of Muddy Creek resulting from varying precipitation magnitudes and durations, antecedent runoff conditions, and channel modifications (cleaned culverts and added detention storage). The precipitation scenarios were used to develop a library of flood-inundation maps that included a 3.8-mile reach of Muddy Creek and tributaries within and adjacent to the city. Hydrologic and hydraulic models of the upper Muddy Creek study basin were used to assess streamflow magnitudes associated with simulated precipitation amounts and the resulting flood-inundation conditions. The U.S. Army Corps of Engineers Hydrologic Engineering Center-Hydrologic Modeling System (HEC–HMS; version 4.4.1) was used to simulate the amount of streamflow produced from a range of precipitation events. The Hydrologic Engineering Center-River Analysis System (HEC–RAS; version 5.0.7) was then used to route streamflows and map resulting areas of flood inundation. The hydrologic and hydraulic models were calibrated to the September 28, 2019; May 27, 2021; and June 25, 2021, runoff events representing a range of antecedent runoff conditions and hydrologic responses. The calibrated HEC–HMS model was used to simulate streamflows from design rainfall events of 30-minute to 24-hour durations and ranging from a 100- to 0.1-percent annual exceedance probability. Flood-inundation maps were produced for reference stages of 1.0 foot (ft), or near bankfull, to 4.0 ft, or a stage exceeding the 0.1-percent annual exceedance probability interval precipitation, using the HEC–RAS model. The results of each precipitation duration-frequency value were represented by a 0.5-ft increment inundation map based on the generated peak streamflow from that rainfall event and the corresponding stage at the Muddy Creek reference location. Seven scenarios were developed with the HEC–HMS hydrologic model with resulting streamflows routed in a HEC–RAS hydraulic model, and these scenarios varied by antecedent runoff condition and potential channel modifications. The same precipitation scenarios were used in each of the seven antecedent runoff and channel conditions, and the simulation results were assigned to a flood-inundation map condition based on the generated peak flow and corresponding stage at the Muddy Creek reference location.

Missouri↗

Hydrogeologic mapping and three-dimensional geologic modeling of glacial deposits in a multicounty area of southeastern Michigan, northeastern Indiana, and northwestern Ohio

The glacial deposits underlying southeastern Michigan, northeastern Indiana, and northwestern Ohio are a substantial source of water to communities, agriculture, and industry in the region. Previous efforts to characterize aquifer materials in the area cited a need for additional information about the underlying hydrogeologic characteristics and related groundwater availability as well as improved mapping of the extent and properties of the glacial deposits. Recent U.S. Geological Survey multi-State compilations of water-well drilling records have greatly increased access to high-resolution geologic data, particularly in glacial depositional environments. This study by the U.S. Geological Survey, in cooperation with the Ohio Environmental Protection Agency, uses processed data from the State-managed collections of well records to characterize the glacial deposits in the study area using two methods. The first method creates two-dimensional maps of basic hydrogeologic information commonly required for assessments of groundwater availability, including (1) total thickness of glacial deposits, (2) total thickness of coarse-grained deposits, (3) specific-capacity-based transmissivity and hydraulic conductivity, and (4) texture-based estimated equivalent horizontal and vertical hydraulic conductivity and transmissivity. The second method builds a hydrogeologic framework of the complex glacial aquifer through construction of a volumetric geologic model by using three-dimensional kriging. Results of the volumetric model indicate that aquifer materials are primarily concentrated in the western parts of the study area near the Indiana-Ohio border. Coarse-grained sediments are also present as surficial deposits in the north of the study area where intermixing glacial advances created complex distributions of unconsolidated deposits. Two-dimensional maps of hydrogeologic properties support the volumetric model, showing thicknesses of coarse-grained deposits that reach up to 250 feet in the western sections of the study area and progressively thin to near absence in the east. Visualization of the aquifer materials with a volumetric model generally shows a highly discontinuous distribution of coarse- and fine-grained materials, with no clearly defined boundaries to delineate the extent of the aquifer. Comparisons of cross sections derived from the volumetric model with existing published maps support previous near-surface hydrogeologic interpretations while filling gaps where data are sparse, particularly in deeper parts of the aquifer. Both the two-dimensional maps and the volumetric model provide data that can directly inform assessments of groundwater availability, in addition to having future applications to studies of groundwater flow and transport.

Indiana, Michigan, Ohio↗

Reconstructing the Quaternary depositional history using geologic mapping and three-dimensional modeling of the subsurface near Fort Morgan, northeastern Colorado

Centered on Fort Morgan, Colorado, this study is intended to build from previous work by adding a three-dimensional (3D) view of the subsurface to better understand the depositional history of Quaternary deposits. A 1:100,000 scale geologic map was made by combining previous geologic maps, regional soil maps, and recent field investigations. In addition to the geologic mapping, drill hole lithologic data from water wells and oil and gas exploration were compiled and lithologic units simplified to best represent the stratigraphy of the Quaternary deposits. From these subsurface data, a 3D subsurface model was constructed, trimmed at the surface by a digital elevation model, and a bedrock surface foundation gridded from drill hole data was added. The surface of the 3D model was then compared visually to the surficial geologic map. Cross sections were constructed from the 3D model and compared to site-specific drilling that was done as part of this project. Finally, the model was examined in detail to reconstruct the depositional history of the subsurface alluvial and eolian units. Alluvial and fluvial drainage basins exposed in the subsurface have a greater areal extent than the present-day narrow drainages. Older eolian sand in the subsurface tends to be interbedded with loess indicating coeval deposition. Holocene sand, both eroded from bedrock exposed at the surface north of the study area and reworked from the South Platte River, buries most of the interbedded older sand and loess.

Colorado↗

Flood-inundation maps for Río Grande de Arecibo in and near Utuado Municipio, Puerto Rico, 2026

The U.S. Geological Survey (USGS) created digital flood-inundation maps for a 3.4-mile reach of Río Grande de Arecibo in the municipality of Utuado Municipio, Puerto Rico. Water-surface profiles were computed for the stream reach by using a one-dimensional, steady-state, step-backwater model. This model was calibrated to the current (2026) stage-streamflow relation (rating curve number 11.0) for the USGS streamgage 50024950, Río Grande de Arecibo below Utuado, Puerto Rico. The resulting hydraulic model was used to compute 11 water-surface profiles for water levels (flood stages) ranging from 14.00 to 34.00 feet at the streamgage and ranging from what are referred to as “minor flood stage” to above “major flood stage,” as reported by the National Weather Service. The 34.00-foot stage exceeds the peak stage (32.92 feet) recorded at this streamgage in 1998. The simulated water-surface profiles were used in combination with a digital elevation model derived from lidar data to map the inundated areas associated with each flood profile. The flood-inundation maps and the supporting hydraulic model produced by this study can be used by emergency managers and local officials to define flood hazard areas and assess flood mitigation strategies to help protect life and property, to coordinate flood response activities such as evacuations and road closures, and to aid post-flood recovery efforts. Information about map limitations, associated uncertainties, and how to view the maps and access the associated data online is included in this report.

Puerto Rico↗

Bayesian mapping of regionally grouped, sparse, univariate earth science data

Some earth science data are naturally grouped by region, and it is often desirable to map these data by region. However, if there are only a few samples within each region, then the map should be smoothed in an appropriate way to mitigate the problems that arise from having only a few samples. A smoothing algorithm based on a Bayesian hierarchical model is developed and presented in this report. This algorithm has several features that make it especially suitable for mapping earth science data: it can account for measurements that are censored, it can process multiple datasets with different measurement errors and different censoring thresholds, and it can calculate the uncertainty in any statistic that is mapped. The algorithm is demonstrated by mapping gold concentrations that are measured in streambed sediments in the Taylor Mountains quadrangle in southwestern Alaska.

Alaska↗