USGS Science⌕ Search

SEARCH · USGS Science

Results for “Landslides”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources
USGS2013

Mount St. Helens, 1980 to now— What’s going on?

Mount St. Helens seized the world’s attention in 1980 when the largest historical landslide on Earth and a powerful explosive eruption reshaped the volcano, created its distinctive crater, and dramatically modified the surrounding landscape. An enormous lava dome grew episodically in the crater until 1986, when the volcano became relatively quiet. A new glacier grew in the crater, wrapping around and partly burying the lava dome. From 1987 to 2003, sporadic earthquake swarms and small steam explosions indicated that magma (molten rock) was being replenished deep underground. In 2004, steam-and-ash explosions heralded the start of another eruption. A quieter phase of continuous lava extrusion followed and lasted until 2008, building a new dome and doubling the volume of lava on the crater floor. Scientists with the U.S. Geological Survey and University of Washington’s Pacific Northwest Seismograph Network maintain constant watch for signs of renewed activity at Mount St. Helens and other Cascade volcanoes. Now is an ideal time for both actual and virtual visitors to Mount St. Helens to learn more about dramatic changes taking place on and beneath this active volcano.

Washington↗
USGS2013

Natural Hazards Science at the U.S. Geological Survey

The mission of the USGS in natural hazards is to develop and apply hazard science to help protect the safety, security, and economic well-being of the Nation. The costs and consequences of natural hazards can be enormous, and each year more people and infrastructure are at risk. The USGS conducts hazard research and works closely with stakeholders and cooperators to inform a broad range of planning and response activities at individual, local, State, national, and international levels. It has critical statutory and nonstatutory roles regarding floods, earthquakes, tsunamis, landslides, coastal erosion, volcanic eruptions, wildfires, and magnetic storms. USGS science can help to understand and reduce risks from natural hazards by providing the information that decisionmakers need to determine which risk management activities are worth­while.

Fact Sheet↗
USGS2014

The 1964 Great Alaska Earthquake and tsunamis: A modern perspective and enduring legacies

The magnitude 9.2 Great Alaska Earthquake that struck south-central Alaska at 5:36 p.m. on Friday, March 27, 1964, is the largest recorded earthquake in U.S. history and the second-largest earthquake recorded with modern instruments. The earthquake was felt throughout most of mainland Alaska, as far west as Dutch Harbor in the Aleutian Islands some 480 miles away, and at Seattle, Washington, more than 1,200 miles to the southeast of the fault rupture, where the Space Needle swayed perceptibly. The earthquake caused rivers, lakes, and other waterways to slosh as far away as the coasts of Texas and Louisiana. Water-level recorders in 47 states—the entire Nation except for Connecticut, Delaware, and Rhode Island— registered the earthquake. It was so large that it caused the entire Earth to ring like a bell: vibrations that were among the first of their kind ever recorded by modern instruments. The Great Alaska Earthquake spawned thousands of lesser aftershocks and hundreds of damaging landslides, submarine slumps, and other ground failures. Alaska’s largest city, Anchorage, located west of the fault rupture, sustained heavy property damage. Tsunamis produced by the earthquake resulted in deaths and damage as far away as Oregon and California. Altogether the earthquake and subsequent tsunamis caused 129 fatalities and an estimated $2.3 billion in property losses (in 2013 dollars). Most of the population of Alaska and its major transportation routes, ports, and infrastructure lie near the eastern segment of the Aleutian Trench that ruptured in the 1964 earthquake. Although the Great Alaska Earthquake was tragic because of the loss of life and property, it provided a wealth of data about subductionzone earthquakes and the hazards they pose. The leap in scientific understanding that followed the 1964 earthquake has led to major breakthroughs in earth science research worldwide over the past half century. This fact sheet commemorates Great Alaska Earthquake and examines the advances in knowledge and technology that have helped to improve earthquake preparation and response both in Alaska and around the world.

Alaska↗
USGS2016

The 3D Elevation Program: summary for Puerto Rico

Elevation data are essential to a broad range of applications, including forest resources management, wildlife and habitat management, scientific research, national security, recreation, and many others. For the Commonwealth of Puerto Rico, elevation data are critical for flood risk management, landslide mitigation, natural resources conservation, sea level rise and subsidence, coastal zone management, infrastructure and construction management, and other business uses. Today, high-density light detection and ranging (lidar) data are the primary sources for deriving elevation models and other datasets. Federal, State, Tribal, U.S. territorial, and local agencies work in partnership to (1) replace data that are older and of lower quality and (2) provide coverage where publicly accessible data do not exist. A joint goal of State and Federal partners is to acquire consistent, statewide coverage to support existing and emerging applications enabled by lidar data. The National Enhanced Elevation Assessment evaluated multiple elevation data acquisition options to determine the optimal data quality and data replacement cycle relative to cost to meet the identified requirements of the user community. The evaluation demonstrated that lidar acquisition at quality level 2 for the conterminous United States, Hawaii, and selected U.S. territories, and quality level 5 interferometric synthetic aperture radar (IfSAR) data for Alaska, all with a 6- to 10-year acquisition cycle, provided the highest benefit/cost ratios. The 3D Elevation Program (3DEP) initiative selected an 8-year acquisition cycle for the respective quality levels. 3DEP, managed by the U.S. Geological Survey (USGS), the Office of Management and Budget Circular A‒16 lead agency for terrestrial elevation data, responds to the growing need for high-quality topographic data and a wide range of other three-dimensional (3D) representations of the Nation’s natural and constructed features.

Puerto Rico↗
USGS2017

Reducing risk where tectonic plates collide

Most of the world’s earthquakes, tsunamis, landslides, and volcanic eruptions are caused by the continuous motions of the many tectonic plates that make up the Earth’s outer shell. The most powerful of these natural hazards occur in subduction zones, where two plates collide and one is thrust beneath another. The U.S. Geological Survey’s (USGS) “Reducing Risk Where Tectonic Plates Collide—A USGS Plan to Advance Subduction Zone Science” is a blueprint for building the crucial scientific foundation needed to inform the policies and practices that can make our Nation more resilient to subduction zone-related hazards.

Fact Sheet↗
USGS2018

Lahar—River of volcanic mud and debris

Lahar, an Indonesian word for volcanic mudflow, is a mixture of water, mud, and volcanic rock flowing swiftly along a channel draining a volcano. Lahars can form during or after eruptions, or even during periods of inactivity. They are among the greatest threats volcanoes pose to people and property. Lahars can occur with little to no warning, and may travel great distances at high speeds, destroying or burying everything in their paths. Lahars form in many ways. They commonly occur when eruptions melt snow and ice on snow-clad volcanoes; when rains fall on steep slopes covered with fresh volcanic ash; when crater lakes, volcano glaciers or lakes dammed by volcanic debris suddenly release water; and when volcanic landslides evolve into flowing debris. Lahars are especially likely to occur at erupting or recently active volcanoes. Because lahars are so hazardous, U.S. Geological Survey scientists pay them close attention. They study lahar deposits and limits of inundation, model flow behavior, develop lahar-hazard maps, and work with community leaders and governmental authorities to help them understand and minimize the risks of devastating lahars.

Fact Sheet↗
USGS2019

Living with volcano hazards

Volcanic eruptions are among Earth’s most dramatic and powerful agents of change. Ash, mudflows, and lava flows can devastate communities near volcanoes and cause havoc in areas far downwind, downstream, and downslope. Even when a volcano is quiet, steep volcanic slopes can collapse to become landslides, and large rocks can be hurled by powerful steam blasts. Hazardous volcanic conditions might last for a day or decades, all the while threatening people’s health and safety. Scientists with the U.S. Geological Survey and partner agencies assess hazards and closely monitor activity at the Nation’s volcanoes. They provide volcano updates and warnings of hazardous situations, as well as guidance on actions to take. You can prepare your family and community by familiarizing yourself with the types of hazards at volcanoes near where you live and visit.

Fact Sheet↗
USGS2019

When volcanoes fall down—Catastrophic collapse and debris avalanches

Despite their seeming permanence, volcanoes are prone to catastrophic collapse that can affect vast areas in a matter of minutes. Large collapses begin as gigantic landslides that quickly transform to debris avalanches—chaotically tumbling masses of rock debris that can sweep downslope at extremely high velocities, inundating areas far beyond the volcano. Rapid burial by the debris avalanches themselves, associated eruptions and lahars (volcanic mudflows), and inundation by tsunamis triggered when avalanches impact bodies of water can all cause widespread devastation to people and property.

Fact Sheet↗
USGS2020

The 3D Elevation Program and energy for the Nation

High-resolution light detection and ranging (lidar) data are used in energy infrastructure siting, design, permitting, construction, and monitoring to promote public safety through the reduction of risks. For example, lidar data are used to identify safe locations for energy infrastructure by analyzing terrain parameters and identifying and evaluating geologic hazards (for example, landslide and fault locations) and their potential public safety effects on the location or design of infrastructure. Increasingly, engineering companies and regulatory agencies are using lidar and other remote sensing techniques as an efficient method to collect accurate, comprehensive data while reducing risks to field personnel. The U.S. Geological Survey (USGS) 3D Elevation Program (3DEP) is collecting lidar data nationwide (interferometric synthetic aperture radar [IfSAR] data in Alaska) to support a wide range of applications, including projects related to energy infrastructure construction and safety. Renewable energy resources, resource mining, and oil and gas resources were identified by the National Enhanced Elevation Assessment as business uses requiring three-dimensional (3D) elevation data. Elevation data are critical in assessing potential sites for energy infrastructure, such as pipelines, refineries and other facilities, to mitigate risks from natural hazards. For example, the Federal Energy Regulatory Commission (FERC), an independent agency that regulates the interstate transmission of electricity, natural gas, and oil, uses enhanced elevation data to conduct National Environmental Policy Act (NEPA) compliance assessments. The acquisition of high-resolution lidar data by the USGS 3DEP initiative helps the FERC and NEPA permit applicants by providing accurate and consistent data for hazards analysis. The use of these data accelerates the application and review process and avoids the much higher costs of acquiring elevation data along proposed energy facility locations and pipeline corridors.

Fact Sheet↗
USGS2020

Ten ways Mount St. Helens changed our world—The enduring legacy of the 1980 eruption

Mount St. Helens was once enjoyed for its serene beauty and was considered one of America’s most majestic volcanoes because of its perfect cone shape, similar to Japan’s beloved Mount Fuji. Nearby residents assumed that the mountain was solid and enduring. That perception changed during the early spring of 1980. Then, on May 18, 1980, following 2 months of earthquakes and small explosions, the volcano’s over-steepened north flank collapsed in a colossal landslide and triggered a near-horizontal blast, followed by a powerful vertical eruption. The high-speed, rock-filled, and gas-charged blast quickly evolved into a gravitationally driven pyroclastic flow, which leveled millions of trees, stripped them of their branches and bark, and scoured soil from bedrock. The vertical eruption that followed fed a towering plume of ash for more than 9 hours. Winds carried the ash from the volcano and deposited it hundreds of miles away. Lahars (volcanic mudflows) buried river valleys. These catastrophic events caused the worst volcanic disaster in the recorded history of the conterminous United States. The events violently transformed Mount St. Helens and left a lasting impression on the hearts and minds of people living in the Pacific Northwest and beyond.

Washington↗
USGS2021

A 40-year story of river sediment at Mount St. Helens

The 1980 eruption of Mount St. Helens in Washington State unleashed one of the largest debris avalanches (landslide) in recorded history. The debris avalanche deposited 3.3 billion cubic yards of material into the upper North Fork Toutle River watershed and obstructed the Columbia River shipping channel downstream. From the eruption on May 18, 1980, to September 30, 2018, the Toutle River transported a total of about 405 million tons of sediment into the lower Cowlitz River—enough to bury downtown Portland, Oregon, to a depth of 300 feet. Excluding the massive sediment load from the eruption itself, from October 1, 1980, to September 30, 2018, the Toutle River transported more than 248 million tons of sediment, or an average of 6.5 million tons per year. Increased flood risk to downstream communities is managed by a sediment retention structure, grade building structures, berms, levees, and dredging. Near-real-time monitoring of streamflow and sediment yield is important for effective management of these dynamic mitigation efforts. Since the sediment retention structure began trapping sediment in November 1987, the Toutle River has transported on average 2.8 million tons of sediment per year into the lower Cowlitz River. This is still 10 times greater than pre-eruption levels, with higher sediment transport potentially approaching 50 to 100 times greater during storms. Despite the eruption lasting only a few hours, the socioeconomic effects and mitigation measures for the region continue into the 21st century.

Washington↗
USGS2022

Washington and Landsat

Washington is a State of untamed wonders, from its ruggedly beautiful coastline to the volcanic peaks of the Cascades. “The Evergreen State” is also a State of contrasts, home to rainforests west of the Cascades and deserts to the east. Half of Washington is forested, and its orchards grow more than one-half of the apples sold in the United States. Rivers are important to the State, particularly the Columbia River, the largest North American river that flows into the Pacific Ocean. Dozens of dams have been constructed in the river basin, including the largest hydroelectric producer in the Nation, the Grand Coulee Dam. Washington’s diverse landscapes also change in various ways over time. Some are relatively steady, like urban expansion in the populous Puget Sound region. Others can be sudden, like the Mount Saint Helens eruption in 1980—one of the largest volcanic eruptions that caused the largest landslide in U.S. history. Although landscape change may be hard to detect at any one time, the Landsat program provides an objective view of it over decades. Landsat not only allows one to see what Mount Saint Helens looked like before and after the eruption, but also how the area has evolved since. Here are a few examples of how Landsat benefits Washington.

Washington↗
USGS2023

The 3D Elevation Program—Supporting Washington's economy

Washington State has a geographically diverse and spectacular landscape that is divided to the east and west by the largely volcanic mountains of the Cascade Range. Approximately 88 percent of the population lives in western Washington, mostly in urban areas. The climate is varied, with high precipitation and seasonal flooding in the western part of the State, while drier conditions are found east of the Cascades. Where the terrain is mountainous, the dominant vegetation is coniferous forests, which are prone to frequent seasonal fires. The climate and land use in combination with a dynamic geology result in frequent landslides. Washington has the second highest risk, after California, of large and damaging earthquakes because of its geologic setting. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features.

Washington↗
USGS2022

Postfire debris flow hazards—Tips to keep you safe

Often referred to as “mudflows,” debris flows are a type of landslide made up of a rapidly moving mixture of dirt, rocks, trees, and water (and sometimes ash) that start on a hillside and travel downvalley. They can easily overflow channels and severely damage houses, vehicles, or other structures. Areas burned by wildfires are especially susceptible to these hazards, which can be triggered by storms occurring days to years after a fire. Debris flows in burned areas can start on a dry slope after only a few minutes of heavy rainfall—about half an inch an hour or more. They can also threaten unsuspecting areas downstream, as debris flows can travel many miles and affect places that were neither burned nor received any rain. The tips provided in this Fact Sheet can help to keep you safe in a potential debris flow danger area.

Fact Sheet↗
USGS2023

The 3D Elevation Program—Supporting Idaho’s economy

Introduction Due to Idaho’s inland location approximately 350 miles from the Pacific Ocean and its 80 recognized mountain ranges, the State’s climate varies widely, with maritime influence in the northern and western parts of Idaho and continental influence on the eastern side. The weather in the abundant mountains is unpredictable and often associated with natural hazards such as severe thunder and lightning storms leading to flooding, landslides, and wildfires. Issues important to Idaho’s economy include river, stream, and forest resource management, and infrastructure and construction management. Idaho participated in the U.S. Geological Survey 3D Elevation Program (3DEP) in 2016, the State’s first 3DEP project. The success of this project led to development of the Idaho Statewide Lidar Plan. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features.

Idaho↗
USGS2011

Floor of Lake Tahoe, California and Nevada

Lake-floor depths shown by color, from light tan (shallowest) to blue (deepest). Arrows on map (C) show orientations of perspective views. A, view toward McKinney Bay over blocks tumbled onto the lake floor by a massive landslide 10s to 100s of thousands of years ago; dark triangular block near center is approximately 1.5 km (0.9 mi) across and 120 m (390 ft) high. B, view toward South Lake Tahoe and Emerald Bay (on right) over sediment waves as much as 10 m (30 ft) high, created by sediment flowing down the south margin of the lake. Slopes appear twice as steep as they are. Lake-floor imagery from U.S. Geological Survey (USGS) multibeam bathymetric data and U.S. Army Corps of Engineers bathymetric lidar data. Land imagery generated by overlaying USGS digital orthophoto quadrangles (DOQs) on USGS digital elevation models (DEMs). All data available at http://tahoe.usgs.gov/.

California, Nevada↗
USGS2019

Geologic field photograph map of the Grand Canyon region, 1967–2010

The Grand Canyon geologic field photograph collection contains 1,211 geotagged photographs collected during 43 years of geologic mapping from 1967 to 2010. The photographs document some key geologic features, structures, and rock unit relations that were used to compile nine geologic maps of the Grand Canyon region published at 1:100,000 scale, and many more maps published at 1:24,000 scale. Metadata for each photograph include description, date captured, coordinates, and a keyword system that places each photograph in one or more of the following categories: arches and windows, breccia pipes and collapse structures, faults and folds, igneous rocks, landslides and rockfalls, metamorphic rocks, sedimentary rocks, sinkholes, and springs and waterfalls. Original photograph slides are available at the Northern Arizona University Cline Library Special Collections and Archives. The Geologic Field Photograph Map of the Grand Canyon Region, 1967–2010, is an interactive online map application that shows clusters of photograph thumbnails and popup windows that scale as users pan, zoom, and click around the map. The photographs can be filtered by category, searched based on date range, description, and keywords, and (or) downloaded. All information populated within the map is served from a ScienceBase record of the Grand Canyon field photograph collection that can be accessed at https://doi.org/10.5066/F7WS8SHW .

Arizona↗
USGS2023

Pacific coastal and marine science of the U.S. Geological Survey in Santa Cruz, California

Introduction The Pacific Coastal and Marine Science Center is one of three U.S. Geological Survey science centers that serve the mission of the Coastal and Marine Hazards and Resources Program, the primary Federal marine geology and physical science research program focused on the Nation’s coastal and marine landscape. Our portfolio of coastal and marine projects in the Pacific Ocean provides the scientific information necessary to sustainably manage coastal and marine resources, to prepare for natural hazard events such as landslides and tsunamis, and to build resilience in coastal communities vulnerable to the effects of climate change, as well as storms, flooding, and risks to groundwater resources. The Nation’s demand for societally relevant coastal and marine science has never been greater, and we invite you to explore some of our ongoing Pacific Coastal and Marine Science Center activities in these pages.

General Information Product↗