USGS Science⌕ Search

SEARCH · USGS Science

Results for “Explorer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources
USGS2023

Groundwater residence times in glacial aquifers—A new general simulation-model approach compared to conventional inset models

Groundwater is important as a drinking-water source and for maintaining base flow in rivers, streams, and lakes. Groundwater quality can be predicted, in part, by its residence time in the subsurface, but the residence-time distribution cannot be measured directly and must be inferred from models. This report compares residence-time distributions from four areas where groundwater flow and travel time were simulated with conventional simulation-inset models (IMs) and with a new automated model-construction method called general simulation models (GSMs). The comparison provides an opportunity to explore controls on travel time and improve the methods used in the creation of GSMs. These models can be useful for three main-use cases: (1) rapid testing of relationships that govern groundwater flow and age, (2) generation of consistent examples for training a machine-learning metamodel, and (3) serving as a starting point for more detailed models. Comparison of the GSMs to IMs indicated a qualified pattern of agreement for residence-time distributions as indicated by the Nash-Sutcliffe efficiency and Spearman’s correlation coefficient. The agreement was best for the median values of the simulated residence times in young fractions of groundwater (defined as the fractions of groundwater in samples less than 65 years old) at the scale of the eight-digit hydrologic-unit code. Generally, the median values of the young fractions in the IMs were correlated with the median values from the GSMs. The relative trends across the four areas also were similar for the other residence-time metrics. The medians of residence-time metrics at finer scales show a fair degree of scatter. The GSM results compared most poorly for median travel times in the older fraction of groundwater (older than 65 years). The GSM approach is intended as a flexible framework for developing models that can be useful individually as screening tools or collectively to support projects in statistical learning. Although one set of GSM algorithms was presented here, the approach can accommodate many types of data and also different categories of prior information. Comparison of GSMs and IMs suggests ways in which the GSMs, while remaining easy to construct and calibrate, can be improved for estimating groundwater travel times. IMs do not yield exact travel times, and matching GSMs to IMs does not guarantee an improvement; however, IMs provide a convenient benchmark against which to explore relations between physical characteristics of watersheds and the distribution of travel times within them. This effort was undertaken as part of the National Water Quality Program of the U.S. Geological Survey to assist in determining the susceptibility of groundwater in glacial aquifers to a variety of natural and anthropogenic contaminants.

Illinois, Indiana, Michigan, Wisconsin↗
USGS2023

The Science Application for Risk Reduction (SAFRR) Scenario Retrospective 2006–21

The U.S. Geological Survey Science Application for Risk Reduction (SAFRR) Project has created four major hazard scenarios—ShakeOut, ARkStorm, Tsunami Scenario, and HayWired—with multidisciplinary teams of scientists, academics, and practitioners. By presenting a clear and highly detailed narrative of potential damage from earthquakes, tsunamis, and winter storms, the scenarios are intended to foster science-based preparedness strategies and disaster risk reduction innovations. This evaluation explores the presence of these scenarios in cultures of preparedness and their role in disaster risk reduction, and reports barriers and enablers to creating and using these scenarios. To do this, the evaluation team developed a mixed-methods study that includes background research for each scenario, qualitative interviews, data collection of media and academic engagement, and examples of SAFRR scenario use in hazard planning. The data collection led to the development of a hazard scenario evaluation tool that combines theories from multiple disciplines to create a best practice set of categories that aid in scenario use and efficacy. The evaluation tool categories—actionable, longitudinal, educational, relevant, and thorough—are organized as a series of checklists that are used to determine how the scenario planners prioritized different aspects of the scenarios to achieve their goals. The tool could also be used to aid scenario planning for other regional disaster risk reduction scenarios of a similar scope. Findings from this evaluation include detailed narratives of scenario use over time, demonstrating that the scenarios have continued to be useful in hazard planning and preparedness across the globe. Examples of use include using the scenarios to advocate for resilient building and development policy, to promote hazard response exercises, and as source data for the development of new hazard models and science. The scenarios themselves are innovative, both in the hazard science created for scenario development and in their branding and public engagement as U.S. Geological Survey products. This SAFFR retrospective is a descriptive evaluation and does not formally address the effects of the scenarios. Nevertheless, this report does include evidence of scenario affects as discovered through qualitative interviews and research, which is presented to explore how the SAFRR scenarios have been received by cultures of preparedness.

Scientific Investigations Report↗
USGS2024

Water-quality trends in the Kansas River, Kansas, since enactment of the Clean Water Act, 1972–2020

The Clean Water Act was passed by Congress in 1972 to regulate pollution within the waters of the United States. The U.S. Geological Survey (USGS), in cooperation with the Kansas Department of Health and Environment (KDHE), the Kansas Water Office, the Nature Conservancy, the City of Lawrence, the City of Manhattan, the City of Olathe, the City of Topeka, WaterOne, and Evergy, compiled and analyzed historical streamflow and water-quality data collected by USGS and KDHE to characterize trends in water-quality constituents of interest because of their relation to water supply, drinking-water treatment, and sediment and nutrient transport, among others (total dissolved solids, chloride, ammonia, dissolved inorganic nitrogen [ammonia and nitrate plus nitrite], total nitrogen, orthophosphate, total phosphorus, total suspended solids, and fecal coliform bacteria) during mean- and low-flow conditions in the Kansas River since the passage of the Clean Water Act in 1972 through 2020. Trends in water-quality concentrations, or densities, and loads were analyzed using the Exploration and Graphics for RivER Trends R package and Weighted Regressions on Time, Discharge, and Season (WRTDS) model at upstream (Kansas River at Wamego, Kansas; USGS station 06887500) and downstream (Kansas River at De Soto, Kansas; USGS station 06892350) locations along the Kansas River using streamflow and water-quality data collected by the USGS and KDHE during 1972 through 2020. The Exploration and Graphics for RivER Trends Confidence Intervals R package and WRTDS bootstrap test estimated direction, uncertainty, and likelihood of trends in concentration and loads for each water-quality constituent of interest. Downward trends in concentration and load were observed for 5 of the 9 water-quality constituents at both sites during mean-flow conditions during the study period. During low-flow conditions, 7 of the 9 constituents exhibited downward trends, possibly reflecting reductions in point-source contributions to the Kansas River. Downward trends in ammonia, dissolved inorganic nitrogen, and total nitrogen during mean- and low-flow conditions were observed at both Kansas River sites, which were similar to patterns observed nationally. Upward trends were generally observed for orthophosphate and total phosphorus, which were similar to patterns observed at sites in the Mississippi River Basin. Downward trends, or no trend, were observed for chloride. Upward and downward trends were observed for total dissolved solids. Downward trends in total suspended solids and fecal coliform bacteria were observed at both sites, which were also similar to patterns observed nationally. The long-term trend analyses in this report are an essential step to understanding how water-quality conditions have changed in the Kansas River since the passage of the Clean Water Act.

Kansas↗
USGS2025

Tracking status and trends in seven key indicators of river and stream condition in the Chesapeake Bay watershed

Freshwater streams and rivers are recognized as vital habitats within the Chesapeake Bay watershed, which has been undergoing extensive restoration efforts for more than 30 years. Resource managers need to understand stream and river condition and how these conditions are changing over time to determine whether regional long-term restoration and conservation goals are being met. The objective of this report was to document the spatial and temporal variability of conditions for seven indicators of river and stream health across the nontidal Chesapeake Bay watershed. The framework for the U.S. Geological Survey’s Nontidal Network (NTN), a network of more than 100 nutrient and suspended sediment monitoring locations, was extended to assess conditions for six additional indicators of stream health: temperature, salinity, toxic contaminants, streamflow, hydromorphology, and biological aquatic communities. For each indicator, the latest available data from multiple sources were compiled and harmonized, and key metrics were identified to describe indicator conditions across space and time. A status condition was defined for each indicator to describe overall spatial variability in recent condition, and trend analyses were used to describe changes in each indicator metric over time. The analysis revealed clear differences in spatial and temporal data coverage across the seven indicators, so individual indicator trend analyses were not constrained to a common time interval. However, a status snapshot was conducted across all indicators for the 2015–17 period to simultaneously explore spatial variability across all indicators. The status snapshot highlighted general degraded conditions across multiple indicators in large metropolitan regions, such as the Baltimore–Washington, D.C., metropolitan area. Regression analysis between indicator status metrics and major land cover for the sites suggest urbanization as a potential driver of degraded conditions for many of the indicator metrics, including total phosphorus, salinity, temperature, high-flow frequency, and metrics of habitat and biological assemblage quality. A final analysis exploring the spatial representation of each indicator network showed that some indicator monitoring networks did not cover certain settings, such as small watersheds. These results provided an initial assessment of stream health status and trends and will continue to be leveraged to describe conditions across the Chesapeake Bay watershed to help inform local and regional management decisions. These results also highlighted the need for improved coordination among monitoring organizations to support long-term multi-indicator monitoring and assessment.

Chesapeake Bay watershed↗
USGS1950

Carnotite resources in the Charles T. area and vicinity, San Miguel County, Colorado

Between November 1947 and September 1949, the United States Geological Survey, at the request of the Atomic Energy Commission, conducted an exploratory drilling program in the Charles T. area and vicinity. The purpose of the exploration was to discover new carnotite deposits to support milling operations on the Colorado Plateau, and to appraise the uranium and vanadium resources of the area explored.

Colorado↗
USGS1952

Pegmatites of the Crystal Mountain district, Larimer County, Colorado

The Front Range of Colorado is composed chiefly of schists of the pre-Cambrian Idaho Springs formation which have been intruded by a variety of granitic batholiths. In the Crystal Mountain district the Mount Olympus granite, a satellite of the Longs Peak batholith, forms sills and essentially concordant multiple intrusions in quartz-mica schist that dips southward at moderate to steep angles. A great number of pegmatites accompanied and followed the intrusion of the sills, and formed concordant and discordant bodies in schist and granite. Over 1,300 pegmatites in the Hyatt area north of the Big Thompson River are mapped and individually described. There are 27 pegmatites in the area that are made up of a wall zone and a core, and one, the pegmatite at the Hyatt mine, is composed of five zones. The largest pegmatites in the area are discordant in schist and occupy zones that are interpreted to be tear faults and tension fractures produced by the successive intrusions of granite that formed multiple sills. The majority of pegmatites in the large multiple sills were emplaced along the foliation and fractures. The composition of 96 percent of the pegmatites is granitic, 3.5 percent are quartz-rich pegmatites, and a few are tourmaline-rich. The pegmatites were intruded over a period of time and probably were derived from a granitic magma at different stages during differentiation. Solutions escaping from many of the pegmatites tournalinized and silicified the wall rocks for a few inches to two feet, but chemical and spectrographic analyses fail to show the transport of any other constituents. Perthite, plagioclase, and quartz are the essential minerals of the pegmatites, and muscovite is a minor but widespread constituent. Tourmaline, garnet, beryl, and apatite are common accessory minerals, and lithiophillitite-triphylite, bismuthinite, uraninite, columbite-tantalite, and chrysoberyl are rare constituents. Beryl is found in 250 or 27 percent of the pegmatites and makes up 0.01 percent or more of 77 bodies. The beryl-bearing pegmatites are richest in two of the three large granite masses, and are somewhat less rich at a distance of more than a thousand feet from the margins of the intrusives, but contain the least beryl in the thousand-foot belt immediately surrounding the intrusives. The Hyatt pegmatite is by far the richest deposit of beryl in the area mapped. Most of the pegmatites mapped are "unzoned" or homogeneous pegmatites. All gradations are visible between bodies consisting of uniform texture and mineral distribution to zoned pegmatites. The interpretation is made that, for most pegmatites, the initial composition determines whether or not zones will form. Pegmatites containing many zones can form from a magma composed of the elements in perthite, plagioclase, quartz, and muscovite, depending on the proportions of the components crystallizing at any given time. The complexly zoned deposits depend for their formation on the presence of a number of the rarer elements, principally lithium. Replacement textures in zones result from the interaction of the rest-liquid with the earlier-formed solid crystals. No mappable pegmatite in the Crystal Mountain district formed from the replacement of pre-existing pegmatite by solutions escaping from the rest-liquid, or by solutions originating outside the pegmatite. Three beryl-bearing zoned pegmatites, the Hyatt, Big Boulder, and Buckhorn Mica deposits, were explored by core drilling. Each deposit is mapped and described in detail, and the mineral reserves evaluated. The exploration indicates a total of 2,000 tons of beryl, of which 480 tons is estimated to be recoverable by hand sorting. The mapping of the 3 3/4-square mile Hyatt area indicates beryl in sufficient abundance to infer beryl resources of an additional 1,150 tons. Small tonnages of scrap mica and perthite may be obtained from the Hyatt and Big Boulder prospects, and columbite-tantalite may occur in sufficient amounts at the Buckhorn Mica mine and Tantalum claim to produce several hundred pounds as a byproduct of beryl mining. Dumps at the various deposits contain 25 to 50 tons of beryl.

Colorado↗
USGS1951

Carnotite resources of the upper group area, San Miguel County, Colorado

The Upper group area, which consists of 10 Government claims and adjoining public land, is 2 miles southeast of Slick Rock, San Miguel County, Colo., in unsurveyed secs. 5 and 6, T. 43 N., R. 18 W., New Mexico principal meridian. The area is equidistant from mills at Monticello, Utah, and Naturita, Colo. Both mills are reached by about 45 miles of all-weather roads. About 2,700 tons of carnotite ore was produced from the area between 1921 and 1943 (tons used in this report are short tons). This ore had an estimated average grade of 0.25 percent U30g and 1.7 percent V205. The ore deposits are in the top sandstone stratum of the Salt Wash sandstone member of the Tipper Jurassic Morrison formation. The principal ore-bearing minerals, which mainly impregnate the sandstone, consist of uranium-bearing carnotite and a micaceous vanadium-bearing mineral called “roscoelite." The deposits are mostly in small podlike masses called "rolls." The size of the rolls ranges from less than 50 to more than 1,500 tons each. The long axes of the rolls have a dominant northeasterly to easterly trend. Exploration by the Geological Survey was done on behalf of the Atomic Energy Commission to test unexplored ground for new deposits of carnotite ore and to gain a better appraisal of the reserves in the area. From 1948 to 1950, 186 diamond-drill holes were completed for a total of 14,577 feet. The areas of favorable sandstone were found and defined by holes drilled 300 to 500 feet apart. Altered mudstone, carbonaceous material in the sandstone, and color of the sandstone were used to determine the favorability of the sandstone. Within areas containing favorable sandstone holes were drilled on 100- to 150-foot centers to find deposits. Where deposits were found more than 20 feet below the surface, they were roughly outlined by holes drilled on 50- to 75- foot centers. Deposits discovered within 20 feet of the surface were not outlined. Reserves in deposits found by the drilling are classed as indicated and inferred, whereas those reserves that are predicted solely on geologic evidence are classed as potential. Indicated reserves computed at the highest thickness and grade cut-offs (1 foot or more thick and 0.10 percent U3O8 or .10 percent V205) total 5,000 tons, averaging 0.19 percent U308 and 1.6 percent V205. Inferred reserves computed at the same cut-offs total 3,500 tons, averaging .22 percent U308 and 1.7 percent V205. Both the indicated and inferred reserves, as well as the pounds of contained U3O8and V205, are summarized in table 1. Potential reserves are predicted to total about 1,500 tons, averaging about 0.20 percent U3O8 and 1.6 percent V205. Most of the potential reserves are expected to be in small scattered deposits within 20 feet of the surface. No additional diamond drilling by the Geological Survey is planned in the Upper group area. Several specific localities, principally in the central part of the area, are recommended for further exploration by jackhammer and wagon drilling by lessees and operators.

Colorado↗
USGS1952

Carnotite resources of Club Mesa, Montrose County, Colorado

Club Mesa is 1 mile west of Uravan, Montrose County, Colo. About 200,000 short tons of carnotite ore containing an estimated 0.45 percent U 3 O 8 and 2.1 percent V 2 O 5 has been mined from the mesa. This production represents about one-fifth of the carnotite ore mined from the Colorado Plateau. All the principal deposits on the mesa are in the main ore-bearing sandstone which is in the top part of the Salt Wash sandstone member of the Jurassic Morrison formation. The deposits are in tabular masses of uneven thickness lying more or less parallel to the enclosing strata. The ore consists mainly of sandstone impregnated with carnotite and vanadiferous clay minerals. The sandstone near the deposits is generally over 30 feet in thickness, contains noticeable quantities of carbon, and vivid patches of limonite (?) stain. Also near ore deposits, the mudstone in contact with the sandstone is altered from red to gray or green through a thickness of 3 or 4 feet. Certain linear features of the ore bodies and of favorable parts of the main ore-bearing sandstone offer clues by their orientation to extensions of known ore bodies and of favorable ground. These features on Club Mesa trend mostly east to northeast. Between March 6, 1948, and January 22, 1952, the U.S. Geological Survey drilled 651 holes for a total of 167,495 feet. As a result of this drilling, 18 deposits were discovered and partly outlined. These range in size from 200 to 55,000 short tons of indicated ore reserves and are in layers 1 foot or more thick containing 0.10 percent or more U 3 O 8 or 1.0 percent or more V 2 O 5 . About 85 percent of this ore is in public land; the remainder is in claims owned by the United States Vanadium Co. Reserves in deposits known from drill holes or exposures are classed as indicated or inferred, and those in deposits that are predicted solely on geologic evidence are classed as potential. The tons of indicated and inferred reserves and the pounds of contained U 3 O 8 and V 2 O 5 are summarized in table 1. These reserves are subdivided also by thickness and grade cutoffs. At the higher grade cutoff, reserve figures express approximately the tonnage and grade of material that might actually be mined from these deposits under 1951 conditions. Indicated and inferred reserves of this type total 198,000 short tons, averaging 0.35 percent U 3 O 8 and 1.8 percent V 2 O 5, and contain 1,1,372,000 pounds of U 3 O 8 and 7,260,000 pounds of V 2 O 5. These reserves are based on Geological Survey drilling. Potential reserves are predicted to total about 40,000 short tons, averaging about 0.35 percent U 3 O 8 and 1.9 percent V 2 O 5 . No additional exploration on Club Mesa is planned by the Geological Survey, but exploration by private companies is recommended.

Colorado↗
USGS1952

Carnotite resources of Outlaw Mesa, Mesa County, Colorado

The U.S. Geological Survey explored Outlaw Mesa for carnotite deposits from 1949 through 1951 with 1,302 diamond-drill holes that totaled 222,150 feet. Total production from Outlaw Mesa from 1914 through 1951 was about 30,000 short tons of carnotite ore, having an estimated grade of about 0.40 percent U3O8 and 1.7 percent V205. The known carnotite deposits are in a number of sandstone lenses in the upper part of the Salt Wash sandstone member of the Jurassic Morrison formation. The deposits are mainly impregnations of sandstone by carnotite and vanadium-bearing clay minerals. Commonly, the deposits are irregular tabular layers or pod-like or crescentic masses ("rolls") connected by thin layers of mineralized rock. The deposits and rolls have a dominant northeasterly trend. Useful criteria for recognizing-sandstone that might contain mineralized rock are: (1) thick, light-brown sandstone, (2) gray mudstone at the base of and in this sandstone, and (3) abundant carbonaceous material. The indicated and inferred reserves of carnotite-bearing material, and the pounds of contained U308 and V205 are summarized in table 1. Potential reserves, whose existence is based on geologic evidence alone, are estimated to total about 80,000 short tones, averaging about 0.35 percent U308 and 1.5percent V205. No further exploration by the Geological Survey is planned; however, additional drilling by private operators is recommended, particularly in ground underlain by mineralized rock.

Colorado↗
USGS1953

Thorium investigations, 1950-52, Wet Mountains, Colorado

The Wet Mountain thorium district was discovered in 1950 by members of the U.S. Geological Survey during reconnaissance investigations for uranium made on the behalf of the Atomic Energy Commission The size of this new district is incompletely known, but the deposits found to date are in an area 20 miles long and about 10 miles wide, the southwest boundary of which extends northwest from Querida and Rosita Custer County, into Fremont County. Most of the deposits, however, are in the southeastern half of this area The thorium minerals occur in barite-sulfide veins along northwest-trending shear zones that cut a pre-Cambrian complex or amphibolite, biotite-granite gneiss, metagabbro, migmatite, microcline granites, pegmatite and white granite, and syenite (?) o Along the shear zones are premineralization basic (lamprophyre (?)) dikes. Thorite has been tentatively identified as the principal radio- active mineral It is associated with barite: quartz, galena, fluorite, limonite, and pyrite Some of the shear zones perhaps can be traced for as much as 2 miles, but the largest known thorium-bearing ore body is as much as 300 feet long, 26 feet wide, and 400 feet deep. Samples from the veins contain as much as 1.6 percent equivalent Th0 2 Eleven diamond drill holes, totaling 3,292.4 feet have explored five shear zones on the Haputa Ranch. Three ore bodies of possible economic interest are indicated in two interconnecting shear zones. No other deposits in the wet Mountains have been explored, or even sampled adequately to hazard an estimate as to grade and tonnage of reserves.

Colorado↗
USGS1954

Monazite in Atlantic shore-line features

This report is a survey of present and potential production of monazite from part of the Maryland-Florida section of the Atlantic Coastal Plain. The part of the Coastal Plain covered here is the outer (shore-ward) half. In this area, all the large heavy-mineral placers so far discovered occur in sand bodies that, by their shape, size, orientation, and lithology, appear to be ancient beaches, spits, bars, or dunes. Smaller placers have produced from recent shore-line features. The inner part of the Coastal Plain, to be treated in another report, is underlain generally by older rocks, ranging in age from Cretaceous to older Pleistocene. Only two large heavy-mineral placers are now in production at Trail Ridge, and near Jacksonville, both in Florida. Production is planned for the near future near Yulee, Fla.: in Folkston, Ga.: and at one or two localities in eastern North Carolina. Each of these three will produce monazite as a byproduct; the total new reserve for the three placers is about 33,000 tons of monazite. In large heavy-mineral placers of this type, monazite has not been found to run more than about 1 percent of total heavy minerals. In some large placers, notably Trail Ridge, it is almost or completely lacking. No reason for its sporadic occurrence has been found in this investigation. Two placers of potential economic value have been found by this project in Virginia, one west and one east of Chesapeake Bay. Neither is of promise for monazite production, but if they serve to open up exploration or production in the area, there is a chance for monazite as a byproduct from other placers. A discovery of considerable scientific interest has to do with the occurrence of two different suites of heavy minerals in the Coastal Plain, at least south of Virginia. One, an “older” suite, lacks epidote, hornblende, and garnet; this suite occurs in all older formations and in Pleistocene deposits lying above about 50 or 60 feet above sea level. The other, “younger” suite contains these three minerals: it is restricted to recent beaches and streams, and to Pleistocene deposits at low altitudes. Monazite may occur with either of these suites. The percentage of titania (TiO 2 ) in illmenite is of both scientific and economic interest. Illmenite is by far the most sought-for mineral in present exploration, and whether it contains the “normal” 53 percent of titania or, as it commonly does in Florida, 60 percent, is often of decisive importance in its exploitation. The nature, time, and place of this “enrichment” in titania has not been worked out. The heavy-mineral industry of the area seems to give promise of considerable expansion in the near future, and a greater monazite production seems assured.

Florida;Maryl;North Carolina;South Carolina;Virgin↗
USGS1956

Uranium content of ground and surface waters in western Kansas, eastern Colorado, and the Oklahoma Panhande

During 1954, 1955, and 1956, 324 water samples were collected in western Kansas, eastern Colorado, the Oklahoma Panhandle, and northeastern New Mexico, to determine the uranium content of water from the various rock units and geologic terranes in the region, and to locate areas in which, large amounts of uranium in the water might reflect the presence of nearby uranium accumulations. Three geologic terranes are present in the report area: the Tertiary-Quaternary tuff ace o us terrane, the Upper Cretaceous shale terrane, and the upper Permian through Lower Cretaceous sandstone terrane. The average uranium content of 179 water samples from the tuffaceous terrane, which is composed primarily of tuffaceous, fluviatile rocks ranging in age from Pliocene to Pleistocene, is 6.7 parts per billion. A total of 48 samples from the Upper Cretaceous shale terrane, which is composed almost entirely of shale and limestone of marine origin, contain an average of 20.4 parts per billion uranium , Sandstone, silt stone, and clay stone of terrestrial and near-shore marine origin are the predominant constituents of the upper Permian through Lower Cretaceous sandstone terrane, and the 83 water samples collected from, or related to, rock units of this terrane contain an average of 10.2 parts per billion uranium. The average uranium content figure derived for the tipper Cretaceous shale terrane may not be representative of the uranium content of waters from this terrane throughout the report area because more than half of the samples assigned to the terrane were collected in an area in which most water samples contain relatively large amounts of uranium. Compared to the shale terrane, the tuffaceous terrane and the sandstone terrane are both represented by a greater number of samples collected over a much larger area and the average uranium content figures derived for them are believed to be representative of the uranium content of waters from, or related to, rock units of the two terranes in the report area. The average uranium content figures derived for different rock units, or groups of rock units, subdivided by the source type from which the samples were collected (well, spring, stream, municipal water system, reservoir, or lake), and in some cases by geographic parts of the report area, are believed to be of more potential use in any future hydrogeochemical exploration in the area than are the average uranium content figures derived for the three geologic terranes. The average uranium content of ground-water samples from 12 individual rock units or groups of rock units ranges from less than 1. 0 to 38 parts per billion. Several rock units were sampled over large enough areas to indicate that waters from the same rock unit in different parts of the report area may range widely in average uranium content. Water samples from some of the rock units in the area, particularly those of Triassic and Permian age, contain large amounts of uranium, and in some parts of the report area, such as the Cimarron River area of westernmost Oklahoma and northeastern New Mexico, and the Rule Creek area in Bent and Las Animas Counties, Colo. , most, or all, of the water samples collected contain relatively large amounts of uranium. Further exploration to determine the source of the uranium in the water from these rock units and areas may be worthwhile.

Colorado;Kansas;New Mexico;Oklahoma↗
USGS1951

Uranium in the Copper King Mine, Black Hawk No. 1 Claim, Larimer County, Colorado

Radioactive rock was discovered on the dump of the Copper King mine, sec. 8, T. 10 N., R. 72 W., Larirrier County, Colo., in the summer of 1949. The mine had been prospected intermittently for copper and zinc since 1,916, but there is no record that ore was produced. The country rock is pre-Cambrian granite containing many schist inclusions and narrow pegmatite dikes. Pitchblende disseminated in chlorite and sulfides was deposited in an obscure vein system during an intermediate stage of mineralization. This stage was preceded by biotitic alteration of amphiboles and sulfide deposition. The latest stage of mineralization is represented-by the limonitic dense quartz vein followed during mining. The uranium-bearing vein is about 2-3 feet wide and the dense quartz vein is less than 6 inches wide. Both veins are bordered by 1-3 feet of biotite- and sulfide-bearing granite and arriphibole schist. The uranium content of 26 samples taken in the mine and on the dump ranges from 0.002 to 1.40 percent. These samples contained as much as 2.97 percent copper and 5.96 percent zinc. The general outlook for further prospecting near the Copper King shaft is not favorable, because much of the 'immediately surrounding area has been thoroughly investigated without finding abnormal radioactivity. The most favorable environment for concentration of uranium minerals appears to have been in or near schist inclusions in granite, and further exploration in nearby prospects may result in the discovery of other uranium-bearing deposits. In the Copper King mine, additional exploration would aid in determining the extent of the uranium-bearing material.

Colorado↗
USGS2022

Rapidly assessing social characteristics of drought preparedness and decision making: A guide for practitioners

Executive Summary This guide is intended to provide managers, decision makers, and other practitioners with advice on conducting a rapid assessment of the social dimensions of drought. Findings from a rapid assessment can provide key social context that may aid in decision making, such as when preparing a drought plan, allocating local drought resilience funding, or gathering the support of local agencies and organizations for collective action related to drought mitigation. Part I —In the introduction to Part I, we describe the unique problems associated with drought—particularly its slow onset and long duration, which make it difficult to define drought—and highlight five major types of drought (see Box 1). We introduce a few social dimensions of drought (such as economic and institutional perspectives), demonstrate how these dimensions can be interrelated, and describe a few of the modern challenges (such as transformational change and cascading risks) that practitioners face. We also provide background on the rapid assessment method, first describing it as a “snapshot” of the social landscape, then providing some key advantages of the method (it can be quicker and cheaper than more in-depth methods), and lastly describing how secondary data and other methods can help overcome some of the disadvantages of rapid assessments. Then, after summarizing the process of developing this guide, we outline the process of using the guide. Importantly, we compare the guide to a travel guide, which provides many different types of information and is best approached with specific interests in mind. Ultimately, we hope for this guide to be malleable enough that it can be helpful to researchers and practitioners in many different contexts, using many different research methods. Related to how to use the guide, we characterize the type of person who might be motivated to use this guide. We also specify key qualifications for a researcher conducting a rapid assessment, drawing particular attention to training on ethical considerations. We sketch out key considerations when choosing social dimensions of drought to focus on, and the type of data used for analysis. First, it is important to note that in this guide we provide nine important social dimensions of drought, but this is by no means a comprehensive list, and a researcher may find that other dimensions better fit their local context. Second, we provide some pros and cons to a narrow (focusing on just a few dimensions or at a smaller scale) versus broad research focus. Lastly, we describe the pros and cons of using primary versus secondary data (one strategy is to use both, sequentially) and qualitative versus quantitative data. Ultimately, Part I of this guide functions as an exploration of the various decisions a researcher will make when designing a rapid assessment. These decisions will inform the type of findings and other outcomes that result from the rapid assessment. Part II —Part II of this guide introduces nine key social dimensions of drought: defining the problem of drought, individual perceptions, social relationships, technology, economics and livelihoods, water governance, decision making, information, and social vulnerability. Each section provides background and key considerations related to a particular dimension, as well as ideas for how to explore the dimension via a rapid assessment. Part III —Part III of this guide provides two hypothetical examples of how one might use this guide to aid the practitioner in implementing the lessons learned here. In the first example, a watershed group uses two dimensions, defining the problem of drought and social relationships, to inform a community meeting about protecting fisheries from drought. In the second example, a resource manager uses the economics and livelihoods and social vulnerability dimensions to inform the development of a livestock grazing drought management plan.

Techniques and Methods↗
USGS2000

Geothermal hydrology of Valles Caldera and the southwestern Jemez Mountains, New Mexico

The Jemez Mountains in north-central New Mexico are volcanic in origin and have a large central caldera known as Valles Caldera. The mountains contain the Valles geothermal system, which was investigated during 1970-82 as a source of geothermal energy. This report describes the geothermal hydrology of the Jemez Mountains and presents results of an earlier 1972-75 U.S. Geological Survey study of the area in light of more recent information. Several distinct types of thermal and nonthermal ground water are recognized in the Jemez Mountains. Two types of near-surface thermal water are in the caldera: thermal meteoric water and acid sulfate water. The principal reservoir of geothermal fluids is at depth under the central and western parts of the caldera. Nonthermal ground water in Valles Caldera occurs in diverse perched aquifers and deeper valley-fill aquifers. The geothermal reservoir is recharged by meteorically derived water that moves downward from the aquifers in the caldera fill to depths of 6,500 feet or more and at temperatures reaching about 330 degrees Celsius. The heated geothermal water rises convectively to depths of 2,000 feet or less and mixes with other ground water as it flows away from the geothermal reservoir. A vapor zone containing steam, carbon dioxide, and other gases exists above parts of the liquid-dominated geothermal zone. Two subsystems are generally recognized within the larger geothermal system: the Redondo Creek subsystem and the Sulphur Creek subsystem. The permeability in the Redondo Creek subsystem is controlled by stratigraphy and fault-related structures. Most of the permeability is in the high-angle, normal faults and associated fractures that form the Redondo Creek Graben. Faults and related fractures control the flow of thermal fluids in the subsystem, which is bounded by high-angle faults. The Redondo Creek subsystem has been more extensively studied than other parts of the system. The Sulphur Springs subsystem is not as well defined. The upper vapor-dominated zone in the Sulphur Creek subsystem is separated from the liquid-dominated zone by about 800 feet of sealed caldera-fill rock. Acid springs occur at the top of the vapor zone in the Sulphur Springs area. Some more highly permeable zones within the geothermal reservoir are interconnected, but the lack of interference effects among some wells during production tests suggests effective hydraulic separation along some subsystem boundaries. Chemical and thermal evidence suggests that the Sulphur Springs subsystem may be isolated from the Redondo Creek subsystem and each may have its own zone of upflow and lateral outflow. The area of the entire geothermal reservoir is estimated to be about 12 to 15 square miles; its western limit generally is thought to be at the ring-fracture zone of the caldera. The top of the reservoir is generally considered to be the bottom of a small- permeability 'caprock' that is about 2,000 to 3,000 feet below land surface. Estimated thicknesses to the bottom of the reservoir range from 2,000 to 6,000 feet. Reservoir temperatures measured in exploration wells range from 225 degrees Celsius just below the caprock to about 330 degrees Celsius in deeper drill holes. Pressures measured in exploration wells in the Redondo Creek area ranged from 450 to 1,850 pounds per square inch. Steam-producing zones have been encountered above the liquid- dominated zones in wells, but the extent of steam zones is not well defined. The reservoir contains a near-neutral, chloride-type water containing about 7,000 milligrams per liter dissolved solids. No thermal springs in the caldera have geochemical characteristics similar to those of the geothermal reservoir fluids sampled in wells. Oxygen-18 and deuterium isotope concentrations of geothermal reservoir fluid indicate a meteoric origin. The moat valleys in

Water-Resources Investigations Report↗
USGS2004

Hydrogeology and simulation of regional ground-water-level declines in Monroe County, Michigan

Observed ground-water-level declines from 1991 to 2003 in northern Monroe County, Michigan, are consistent with increased ground-water demands in the region. In 1991, the estimated ground-water use in the county was 20 million gallons per day, and 80 percent of this total was from quarry dewatering. In 2001, the estimated ground-water use in the county was 30 million gallons per day, and 75 percent of this total was from quarry dewatering. Prior to approximately 1990, the ground-water demands were met by capturing natural discharge from the area and by inducing leakage through glacial deposits that cover the bedrock aquifer. Increased ground-water demand after 1990 led to declines in ground-water level as the system moves toward a new steady-state. Much of the available natural discharge from the bedrock aquifer had been captured by the 1991 conditions, and the response to additional withdrawals resulted in the observed widespread decline in water levels. The causes of the observed declines were explored through the use of a regional ground-water-flow model. The model area includes portions of Lenawee, Monroe, Washtenaw, and Wayne Counties in Michigan, and portions of Fulton, Henry, and Lucas Counties in Ohio. Factors, including lowered water-table elevations because of below average precipitation during the time period (1991 - 2001) and reduction in water supply to the bedrock aquifer because of land-use changes, were found to affect the regional system, but these factors did not explain the regional decline. Potential ground-water capture for the bedrock aquifer in Monroe County is limited by the low hydraulic conductivity of the overlying glacial deposits and shales and the presence of dense saline water within the bedrock as it dips into the Michigan Basin to the west and north of the county. Hydrogeologic features of the bedrock and the overlying glacial deposits were included in the model design. An important step of characterizing the bedrock aquifer was the determination of inputs and outputs of water—leakage from glacial deposits and flows across model boundaries. The imposed demands on the groundwater system create additional discharge from the bedrock aquifer, and this discharge is documented by records and estimates of water use including: residential and industrial use, irrigation, and quarry dewatering. Hydrologic characterization of Monroe County and surrounding areas was used to determine the model boundaries and inputs within the ground-water model. MODFLOW-2000 was the computer model used to simulate ground-water flow. Predevelopment, 1991, and 2001 conditions were simulated with the model. The predevelopment model did not include modern water use and was compared to information from early settlement of the county. The 1991 steady-state model included modern demands on the ground-water system and was based on a significant amount of data collected for this and previous studies. The predevelopment and 1991 simulations were used to calibrate the numerical model. The simulation of 2001 conditions was based on recent data and explored the potential ground-water levels if the current conditions persist. Model results indicate that the ground-water level will stabilize in the county near current levels if the demands imposed during 2001 are held constant.

Michigan↗
USGS1977

Geology and ground-water in western Santa Cruz County, California, with particular emphasis on the Santa Margarita Sandstone

The water-bearing potential of the geologic formations in the western part of Santa Cruz County, Calif., is evaluated. Most of the sedimentary formations in this area are fine-grained rocks of Tertiary age that have been folded and faulted. These rocks, in general, yield supplies of water sufficient only for individual domestic supplies. The Lompico and Santa Margarita Sandstones, however, are coarser grained and have the potential to yield moderate quantities of water (50-100 gallons per minute). Areas where the Lompico Sandstone might warrant explorations are (1) near and on the west side of the Ben Lomond fault, (2) near and south of the outcrop of the Lompico Sandstone between Ben Lomond and Felton, and (3) in the area near Bald Mountain School. The Santa Margarita Sandstone should be explored by test drilling in the area between Davenport and Bonnie Doon. The quality of ground water is generally good, although saline water occurs in the San Lorenzo Formation near Redwood Grove and Riverside Grove. (Woodard-USGS)

California↗
USGS1988

Assessment of ground-water contamination in the alluvial aquifer near West Point, Kentucky

Well inventories, water level measurements, groundwater quality samples, surface geophysical techniques (specifically, electromagnetic techniques), and test drilling were used to investigate the extent and sources of groundwater contamination in the alluvial aquifer near West Point, Kentucky. This aquifer serves as the principal source of drinking water for over 50,000 people. Groundwater flow in the alluvial aquifer is generally unconfined and moves in a northerly direction toward the Ohio River. Two large public supply well fields and numerous domestic wells are located in this natural flow path. High concentrations of chloride in groundwater have resulted in the abandonment of several public supply wells in the West Point areas. Chloride concentrations in water samples collected for this study were as high as 11,000 mg/L. Electromagnetic techniques indicated and test drilling later confirmed that the source of chloride in well waters was probably improperly plugged or unplugged, abandoned oil and gas exploration wells. The potential for chloride contamination of wells exists in the study area and is related to proximity to improperly abandoned oil and gas exploration wells and to gradients established by drawdowns associated with pumped wells. Periodic use of surface geophysical methods, in combination with added observation wells , could be used to monitor significant changes in groundwater quality related to chloride contamination. (USGS)

Water-Resources Investigations Report↗