USGS Science⌕ Search

SEARCH · USGS Science

Results for “Energies”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,477 records · Page 82Linked to original sources

Assessment of two nonnative poeciliid fishes for monitoring selenium exposure in the endangered desert pupfish

We assessed the suitability of two nonnative poeciliid fishes—western mosquitofish ( Gambusia affinis ) and sailfin mollies ( Poecilia latipinna )—for monitoring selenium exposure in desert pupfish ( Cyprinodon macularius ). Our investigation was prompted by a need to avoid lethal take of an endangered species (pupfish) when sampling fish for chemical analysis. Total selenium (SeTot) concentrations in both poeciliids were highly correlated with SeTot concentrations in pupfish. However, mean SeTot concentrations varied among fish species, with higher concentrations measured in mosquitofish than in mollies and pupfish from one of three sampled agricultural drains. Moreover, regression equations describing the relationship of selenomethionine to SeTot differed between mosquitofish and pupfish, but not between mollies and pupfish. Because selenium accumulates in animals primarily through dietary exposure, we examined fish trophic relationships by measuring stable isotopes ( δ 13 C and δ 15 N) and gut contents. According to δ 13 C measurements, the trophic pathway leading to mosquitofish was more carbon-depleted than trophic pathways leading to mollies and pupfish, suggesting that energy flow to mosquitofish originated from allochthonous sources (terrestrial vegetation, emergent macrophytes, or both), whereas energy flow to mollies and pupfish originated from autochthonous sources (filamentous algae, submerged macrophytes, or both). The δ 15 N measurements indicated that mosquitofish and mollies occupied similar trophic levels, whereas pupfish occupied a slightly higher trophic level. Analysis of gut contents showed that mosquitofish consumed mostly winged insects (an indication of terrestrial taxa), whereas mollies and pupfish consumed mostly organic detritus. Judging from our results, only mollies (not mosquitofish) are suitable for monitoring selenium exposure in pupfish.

Water, Air, & Soil Pollution↗

A mosaic of estuarine habitat types with prey resources from multiple environmental strata supports a diversified foraging portfolio for juvenile Chinook salmon

Estuaries provide vital nursery habitat for threatened Chinook salmon (Oncorhynchus tshawytscha) by promoting an ecological portfolio effect, whereby multiple habitat types and environmental strata maximize foraging opportunities for out-migrating salmon by varying the abundance and composition of prey through space and time. To study this portfolio effect, we evaluated the foraging capacity of five estuarine habitat types within the Nisqually River Delta (Puget Sound, Washington, USA). Within each habitat, we sampled invertebrate prey resources from the terrestrial, aquatic, benthic, and epifaunal strata and compared them to juvenile salmon diets from corresponding sampling events. We found that the emergent salt marsh supplied twice as much aquatic prey biomass as any other habitat (720–5523 mg/m3), followed by the mudflat (246–2543 mg/m3) and eelgrass (Zostera marina; 141–2694 mg/m3) habitats. Despite some evidence for selectivity, juvenile salmon diets exhibited substantial compositional overlap, especially when compared to among-habitat differences in available prey resources. Fish that were captured in salt marsh, mudflat, and eelgrass consumed aquatic crustaceans such as mysids, while fish captured upriver in forested and transitional marshes ate a higher proportion of adult and larval insects. The availability and consumption of greater quantities of energy-poor crustaceans in the salt marsh and lower quantities of energy-rich insects upriver highlights a quantity-for-quality tradeoff among estuarine habitats. Our findings indicate that the timing, productivity, and diversity of prey across multiple habitat types and environmental strata determine an estuary’s capacity to support foraging for multiple life history strategies, size classes, and cohorts of juvenile salmon.

Washington↗

Identifying and constraining marsh-type transitions in response to increasing erosion over the past century

Marsh environments, characterized by their flora and fauna, change laterally in response to shoreline erosion, water levels and inundation, and anthropogenic activities. The Grand Bay coastal system (USA) has undergone multiple large-scale geomorphic and hydrologic changes resulting in altered sediment supply, depositional patterns, and degraded barrier islands, leaving wetland salt marshes vulnerable to increased wave activity. Two shore-perpendicular transect sites, one along a low-activity shoreline and the other in a high activity area of the same bay-marsh complex, were sampled to investigate how the marshes within 50 m of the modern shoreline have responded to different levels of increased wave activity over the past century. Surface sediments graded finer and more organic with increased distance from the shoreline while cores generally exhibited a coarsening upwards grain-size trend; all cores contained multiple large sedimentological shifts. 210 Pb-based mass accumulation rates over the last two decades were greater than the long-term (centurial) average at each site with the fastest accumulation rates of 7.81 ± 1.58 and 7.79 ± 1.63 kg/m 2 /year at the sites nearest the shoreline. A shoreline change analysis of three time-slices (1848–2017, 1957–2017, 2016–2017) shows increased erosion at both sites since 1848 with modern rates of −0.95 and −0.88 m/year. Downcore sedimentology, mass accumulation rates, and shoreline change rates paired with foraminiferal biofacies and identification of local estuarine indicator species, Paratrochammina simplissima , aided in identifying paleo marsh types, their relative proximity to the shoreline, and sediment provenance. The high-energy marsh site transitioned from middle marsh to low marsh in the 1960s, and the low-energy marsh site transitioned later, at the end of the twentieth and early twenty-first century, due to its more protected location. Marsh type transition corresponds chronologically with the coarsening upwards grain-size trend observed and the degradation of Grand Batture Island; since its submergence, signatures of multiple storm event have been preserved downcore.

Mississippi↗

Evaluating abiotic influences on soil salinity of inland managed wetlands and agricultural croplands in a semi-arid environment

Agriculture and moist-soil management are important management techniques used on wildlife refuges to provide adequate energy for migrant waterbirds. In semi-arid systems, the accumulation of soluble salts throughout the soil profile can limit total production of wetland plants and agronomic crops and thus jeopardize meeting waterbird energy needs. This study evaluates the effect of distinct hydrologic regimes associated with moist-soil management and agricultural production on salt accumulation in a semi-arid floodplain. We hypothesized that the frequency of flooding and quantity of floodwater in a moist-soil management hydroperiod results in a less saline soil profile compared to profiles under traditional agricultural management. Findings showed that agricultural croplands differed ( p -value < 0.001, df = 9) in quantities of total soluble salts (TSS) compared to moist-soil impoundments and contained greater concentrations (TSS range = 1,160-1,750 (mg kg-1)) at depth greater than 55 cm below the surface of the profile, while moist-soil impoundments contained lower concentrations (TSS range = 307-531 (mg kg-1)) at the same depths. Increased salts in agricultural may be attributed to the lack of leaching afforded by smaller summer irrigations while larger periodic flooding events in winter and summer flood irrigations in moist-soil impoundments may serve as leaching events.

Wetlands↗

On the sustainability of inland fisheries: Finding a future for the forgotten

At present, inland fisheries are not often a national or regional governance priority and as a result, inland capture fisheries are undervalued and largely overlooked. As such they are threatened in both developing and developed countries. Indeed, due to lack of reliable data, inland fisheries have never been part of any high profile global fisheries assessment and are notably absent from the Sustainable Development Goals. The general public and policy makers are largely ignorant of the plight of freshwater ecosystems and the fish they support, as well as the ecosystem services generated by inland fisheries. This ignorance is particularly salient given that the current emphasis on the food-water-energy nexus often fails to include the important role that inland fish and fisheries play in food security and supporting livelihoods in low-income food deficit countries. Developing countries in Africa and Asia produce about 11 million tonnes of inland fish annually, 90 % of the global total. The role of inland fisheries goes beyond just kilocalories; fish provide important micronutrients and essentially fatty acids. In some regions, inland recreational fisheries are important, generating much wealth and supporting livelihoods. The following three key recommendations are necessary for action if inland fisheries are to become a part of the food-water-energy discussion: invest in improved valuation and assessment methods, build better methods to effectively govern inland fisheries (requires capacity building and incentives), and develop approaches to managing waters across sectors and scales. Moreover, if inland fisheries are recognized as important to food security, livelihoods, and human well-being, they can be more easily incorporated in regional, national, and global policies and agreements on water issues. Through these approaches, inland fisheries can be better evaluated and be more fully recognized in broader water resource and aquatic ecosystem planning and decision-making frameworks, enhancing their value and sustainability for the future.

Ambio↗

Thermochemical study of the system Fe-As-S

The results of Toulmin and Barton (1964) for the Fe-S system have been combined with a series of new measurements on As-bearing assemblages in the 500°–850°C temperature range to derive data on the free energies, enthalpies, and entropies of formation for arsenopyrite, loellingite, orpiment, realgar, FeAs, and Fe 2 As. The enthalpies and free energies of formation of orpiment and realgar are only approximately one-half as large as indicated in recent compilations of thermochemical data ( Wagman et al ., 1965). Data are also presented for the covariation of activity of S 2 (g) with temperature and composition of the sulfur-arsenic liquid.

Geochimica et Cosmochimica Acta↗

Heat capacity and thermodynamic properties of andradite garnet, Ca 3 Fe 2 Si 3 O 12 , between 10 and 1000 K and revised values for ΔfGom (298.15 K) of hedenbergite and wollastonite

The heat capacity of synthetic andradite garnet (Ca 3 Fe 2 Si 3 O 12 ) was measured between 9.6 and 365.5 K by cryogenic adiabatic calorimetry and from 340 to 990 K by differential scanning calorimetry. At 298.15 K C o p , m and S o m are 351.9 &plusmn; 0.7 and 316.4 &plusmn; 2.0 J/(mol&middot;K), respectively. Andradite has a &lambda;-peak in C o p , m with a maximum at 11.7 &plusmn; 0.2 K which is presumably associated with the antiferromagnetic ordering of the magnetic moments of the Fe 3+ ions. The Gibbs free energy of formation, &Delta; f G o m (298.15 K) of andradite is &minus;5414.8 &plusmn; 5.5 kJ/mol and was obtained by combining our entropy and heat capacity data with the known breakdown of andradite to pseudowollastonite and hematite at &asymp; 1410 to 1438 K. From a reexamination of the calcite + quartz = wollastonite equilibrium data we obtained &Delta; f H o m (298.15 K) = &minus; 1634.5 &plusmn; 1.8 kJ/mol for wollastonite. Between 300 and 1000 K the molar heat capacity of andradite can be represented by the equation C o p , m = 809.24 - 7.025 &times; 10&minus;2 T &minus; 7.403 &times; 10 3 T &minus;0.5 &minus; 6.789 &times; 10 5 T &minus;2. We have also used our thermochemical data for andradite to estimate the Gibbs free energy of formation of hedenbergite (CaFeSi 2 O 6 ) for which we obtained &Delta; f G o m (298.15 K ) = &minus;2674.3 &plusmn; 5.8 kJ/mol.

Geochimica et Cosmochimica Acta↗

Quartz dissolution in organic-rich aqueous systems

Organic electrolytes are a common component of natural waters and are known to be important in many rock-water interactions. The influence of organic electrolytes on silica mobility, quartz solubility, and quartz dissolution kinetics, however, is less well understood. While there is mounting evidence supporting the presence of an aqueous organic-silica complex in natural waters, the significance of this species is difficult to characterize because of competing interactions in mixed inorganic-organic electrolyte environments. In the experiments reported here, the kinetics of quartz dissolution in dilute aqueous organic-acid solutions between 25 and 70°C were investigated to determine the influence of both organic and inorganic electrolytes. Batch-reactor dissolution experiments in inorganic and organic electrolyte solutions were designed to investigate the hypothesis that organic acids at circum-neutral pH accelerate the dissolution and increase the solubility of quartz in water. Results suggest that multi-functional organic acids such as citrate and oxalate accelerate quartz dissolution by decreasing the activation energy by approximately 20%. The increase in dissolution rate was accompanied by a 100% increase in apparent quartz solubility at 25°C. Experiments using inorganic electrolytes, in contrast, increase the rate of quartz dissolution without decreasing the activation energy, and without increasing solubility. From these data, a model for both a solution complex between dissolved organic acid and monomeric silicic acid, and an activated complex on quartz surfaces is proposed. The model suggests that dissolved organic compounds in natural waters at near-neutral pH and low temperatures are capable of accelerating the dissolution of quartz and increasing its solubility.

Geochimica et Cosmochimica Acta↗

Persistency-field Eh-pH diagrams for sulfides and their application to supergene oxidation and enrichment of sulfide ore bodies

At temperatures prevailing near the Earth's surface, metastable co-existence of chemical substances is common because chemical reactions that would directly lead to the attainment of thermody-namically most stable equilibria are often blocked by high activation energy barriers. The persistency of a metastable assemblage is then governed by alternative reaction paths that provide lower activation energy barriers. Comparison of observed mineral assemblages in the supergene oxidized and enriched sulfide ores with corresponding stability Eh-pH diagrams reveals that the supergene assemblages are mostly metastable due primarily to the persistency of sulfide minerals beyond stability boundaries. A new set of diagrams called persistency-field Eh-pH diagrams has been constructed for binary metal sulfides on the basis of electrochemical and other experimental data. Each diagram delineates the persistency field, which is a combined field of thermodynamic stability and reaction path-controlled metastability, for a specific sulfide mineral. When applied to the supergene assemblages, these new diagrams show much better correspondence to the field observations. Although there may still be room for further refinement, the new diagrams appear to provide a strong visual aid to the understanding of the behavior of sulfide minerals in the supergene conditions.

Geochimica et Cosmochimica Acta↗

Use of the chloride ion in determining hydrologic-basin water budgets - A 3-year case study in the San Juan Mountains, Colorado, U.S.A.

Measurement of chloride concentration and water equivalent in precipitation and recharge at a site can be extrapolated to determine available moisture in a nearby basin. This method also may be extrapolated to a basin with similar climatic characteristics if precipitation, vegetation, and topographic data are available. The average accuracy of the total of evaporation, recharge, and runoff (assuming no storage) was about 10% of total precipitation. Soil-moisture measurements indicate the entire 10% error in moisture balance can be attributed to annual changes in storage. Data requirements for the method are considerably less than data requirements for energy-budget methods to determine available moisture. Potential applications of the method to hydrologic problem-solving are: 1. (1) Estimating total available moisture from chloride concentrations in groundwater or surface water or both. 2. (2) Modeling paleoclimate scenarios and evaluating their correctness by comparison with paleo-groundwater chloride concentrations. 3. (3) Providing an independent comparison for water budgets obtained by energy-budget methods. Obviously the method cannot be applied readily to systems with a lithologic source of chloride. Most systems primarily consisting of tuff, intrusive volcanic rock, nonmarine sediments, quartzite, and other metamorphic rocks will be suitable for application of the model.

Colorado↗

Stability of a very coarse-grained beach at Carmel, California

Monastery Beach at Carmel, California, is a pocket beach composed of very coarse to granular sediment. In profile, the beach has a well-defined berm crest; a steep foreshore; and a gently sloping, barless offshore covered by large, long-crested oscillation ripples. Carmel Submarine Canyon heads a few hundred meters offshore of the beach, and San Jose Creek, a small ephemeral steam, ponds onshore of the central part of the berm. Wave conditions vary greatly during a year because the beach lies open to the Pacific Ocean for azimuths between 270°–322°N whence come a variety of wave types. Even with a variable wave climate, Monastery Beach has maintained a swell profile for almost three years. Aperiodic beach surveys show that the beach responds little to seasonal changes in wave climate. Four survey lines maintained the same swell profile throughout the study period. The fifth line maintained a stable profile only across the foreshore; the berm was twice artificially breached during storms to prevent upstream flooding along San Jose Creek. In comparison, Carmel Beach, a nearby beach composed of medium sand, commonly alternates between swell and storm profiles. The increased stability of Monastery Beach relative to Carmel Beach is attributed to two factors: grain size differences and location within Carmel Bay. Rebuilding proceeded very slowly along the breached part of the berm at Monastery Beach. The probable cause of such a low recovery rate is that oscillation ripples trapped the sand that was carried offshore when San Jose Creek eroded the beach. The ripples, which are active under high-energy conditions, approach dormancy under low-energy conditions. Each ripple, therefore, acts like a reservoir, retaining sand during most swell conditions.

California↗

Control of barrier island shape by inlet sediment bypassing: East Frisian Islands, West Germany

A study of the East Frisian Islands has shown that the plan form of these islands can be explained by processes of inlet sediment bypassing. This island chain is located on a high wave energy, high tide range shoreline where the average deep-water significant wave height exceeds 1.0 m and the spring tidal range varies from 2.7 m at Juist to 2.9 m at Wangerooge. An abundant sediment supply and a strong eastward component of wave power (4.4 × 10 3 W m −1 ) have caused a persistent eastward growth of the barrier islands. The eastward extension of the barriers has been accommodated more by inlet narrowing, than by inlet migration. It is estimated from morphological evidence that a minimum of 2.7 × 10 5 m 3 of sand is delivered to the inlets each year via the easterly longshore transport system. Much of this sand ultimately bypasses the inlets in the form of large, migrating swash bars. The location where the swash bars attach to the beach is controlled by the amount of overlap of the ebb-tidal delta along the downdrift inlet shoreline. The configuration of the ebb-tidal delta, in turn, is a function of inlet size and position of the main ebb channel. The swash bar welding process has caused preferential beach nourishment and historical shoreline progradation. Along the East Frisian Islands this process has produced barrier islands with humpbacked, bulbous updrift and bulbous downdrift shapes. The model of barrier island development presented in this paper not only explains well the configuration of the German barriers but also the morphology of barriers along many other mixed energy coasts.

East Frisian Islands↗

Storm-induced response of a nearshore-bar system

A nearshore-bar system was surveyed periodically through a storm and the following recovery period. The data showed a very rapid response of morphology to changing wave conditions and allowed various models on bar formation to be tested. Under low-energy conditions prior to the storm a small bar was surveyed 13 m offshore. Both the high reflectivity of the beach and the cross-shore distance to the bar are consistent with a model of sediment convergence at the node or antinode of a standing wave of incident period. Such a small-scale bar may be a common feature on beaches with steep foreshores and more gentle offshore slopes. With the increase in wave height during the storm, the bar became better developed and migrated offshore at rates up to 2.2 m h −1 . The bar maintained its form in that the ratio of trough depth to crest depth ( h t h c "> h t h c ) remained roughly constant. The bar was in no way related to processes which would cause the convergence of sediment in the breaker zone; through most of the storm the bar-crest distance offshore was typically only 10% of the surf-zone width. Analysis of the bar distance offshore in terms of a standing wave motion showed that the causative wave period must have been much longer than that of incident waves, probably on the order of a minute. Surf-zone wave data showed significant energy in the infragravity band at these periods although no definite link has been made. After the height of the storm, the bar had a crescentic morphology. The development of this morphology occurred very rapidly with parts of the bar migrating onshore at rates up to 1.2 m h −1 . In contrast to the storm, during the recovery period h t h c "> h t h c varied by nearly a factor of three. Analysis of the offshore and longshore length scales showed the bar to be similar to one which would be generated by a standing mode 1 edge wave of period on the order of one minute.

Marine Geology↗

Coastal erosion: Processes, timing and magnitudes at the bluff toe

Five Lake Erie bluffs (one interlaminated clay and silt, three clay-rich diamicts and one shale) were surveyed at about 2-week intervals and after wind storms for up to 5 years. Erosion of the bluff toes along this low-energy coast occurred during northeast wind storms, which produced surges of up to 1 m and surf-zone waves of up to 1.2 m. Wave impact and/or uprush caused quarrying, which removed most of the toe material, and abrasion. There were from 1 to 23 erosion events/sites, with maximum magnitudes of erosion ranging from 12 to 55 cm/event. Timing and magnitude were linked to erodibility, maximum water level, storm surge, storm duration and beach width. A threshold maximum water level and a threshold surge were necessary for erosion. At these thresholds, the beach was submerged and wave energy was directly expended on the toe. Erosion did not take place when there was shorefast ice or when debris slopes shielded the toe from waves. The originally cohesive toe materials are easily eroded when they weather to an essentially noncohesive state. Wave erosion is the crucial erosion process; removal of material from the toe prevents the development of a stable slope.

Marine Geology↗

High-resolution seismic-reflection interpretations of some sediment deposits, Antarctic continental margin: Focus on the western Ross Sea

High-resolution seismic-reflection data have been used to a varying degree by geoscientists to interpret the history of marine sediment accumulations around Antarctica. Reconnaissance analysis of 1-, 3.5-, and 12-kHz data collected by the U.S. Geological Survey in the western Ross Sea has led to the identification of eight echo-character facies and six microtopographic facies in the sediment deposits that overlie the Ross Sea unconformity. Three depositional facies regions, each characterized by a particular assemblage of echo-character type and microtopographic facies, have been identified on the continental shelf. These suites of acoustic facies are the result of specific depositional processes that control type and accumulation of sediment in a region. Evidence of glacial processes and products is uncommon in regions 1 and 2, but is abundant in region 3. McMurdo Sound, region 1, is characterized by a monospecific set of acoustic facies. This unique assemblage probably represents turbidity current deposition in the western part of the basin. Most of the seafloor in region 2, from about latitude 77°S to 75°S, is deeper than 600 m below sealevel. The microtopographic facies and echo-character facies observed on the lower slopes and basin floor there reflect the thin deposits of pelagic sediments that have accumulated in the low-energy conditions that are typical of deep-water environments. In shallower water near the boundary with region 3, the signature of the acoustic facies is different from that in deeper water and probably indicates higher energy conditions or, perhaps, ice-related processes. Thick deposits of tills emplaced by lodgement during the most recent advance of the West Antarctic Ice Sheet are common from latitude 75°S to the northern boundary of the study area just south of Coulman Island (region 3). The signature of microtopographic facies in this region reflects the relief of the base of the grounded ice sheet prior to decoupling from the seafloor. Current winnowing and scour of shallow parts of the seafloor inhibits sediment deposition and maintains the irregular, hummocky relief that characterizes much of the region. Seafloor relief of this type in other polar areas could indicate the former presence of grounded ice.

Marine Geology↗

Stability of giant sand waves in eastern Long Island Sound, U.S.A.

A combination of a highly accurate bathymetric surveying technique and in-situ submersible observations and measurements were used to assess the migrational trends and morphological changes of large sand waves ( Ht ≤ 17 m) in eastern Long Island Sound. Although residing in a high-energy tidal environment characterized by a net westward sediment flux, the large bedforms are relatively stable over the short term. Over a 7 month period, 55.1% of a total 2942 m of sand wave crestline lengths migrated less than the horizontal accuracy limits of navigation (2 m). Approximately 35% of the remaining sand wave crests migrated less than 4 m. Net migration of the sand wave crests in the study area was 0.2 m. In addition, the bulk form (center of area in profile view) or the base of the sand waves showed little, if any, movement. These data, in conjunction with flow data within the sand wave field, suggest that net migration rates are greater than the time span of this study and/or the sand waves move in response to large residual flows created by high-energy, aperiodic storm events. The latter scenerio suggests that day to day processes only serve to rework and modify the sand waves.

Marine Geology↗

Coastal retreat and shoreface profile variations in the Canadian Beaufort Sea

The coastline of the southern Canadian Beaufort Sea consists primarily of unconsolidated bluffs. Although the sea is ice-free for 3 months of the year and wave energy is restricted by pack ice, the coast is undergoing regional retreat with erosion rates as high as 10 m a −1 in some locations. Simple and multiple regression analyses were carried out to determine the degree of correlation between the mean retreat rate measured at various locations and the different parameters that may control shoreline recession. Sediment texture, ground-ice content, cliff height, wave energy and shoreface gradient revealed medium to poor correlation with erosion rates, showing that the recessive evolution of the coastline can not be explained solely by wave-induced and subaerial processes. The comparison of nearshore echo-sounding records from 1987 with bathymetry from 1971 showed substantial erosion (up to 1 m) of the submarine profile between 12 and 15 m of water. There is strong evidence that this erosion has been caused by sea ice gouging on the seafloor. From depths of 5 to 9 m, accretion has taken place, possibly induced by ice-push processes, and inshore of the 5 m isobath wave and current erosion of the shoreface has occurred. These results suggest that the erosion of the inner shelf by ice gouging drives the erosion observed inshore on the coastal bluffs and nearshore zone as the shoreface profile strives for a state of dynamic equilibrium.

Marine Geology↗

Shoreline deposits and diagenesis resulting from two Late Pleistocene highstands near +5 and +6 metres, Durban, South Africa

In exposures of Pleistocene rocks on the east coast of South Africa, eight sedimentary facies were distinguished on the basis of petrology, grain size, internal structures and field relationships. These are interpreted as deposits of surf zone, breaker zone, swash zone, backbeach, boulder beach and dune environments. Three phases of deposition and diagenesis are recognized. As a result of the stabilising effect of pre-existing coastal facies, the deposits from successive sea level stands are stacked vertically in a narrow coast-normal strip. Early cementation prevented erosion of the deposits during subsequent transgressions. Deposition of subsequent facies took place on an existing coastal dune (Facies 1). A terrace was cut into this dune at a sea level 4.5 to 5 m above present. At this sea level, clastic shoreline sediments were deposited which make up the main sedimentary sequence exposed (Facies 2–7). The steep swash zone, coarse grain size, and comparison with modern conditions in the study area indicate clastic deposition on a high-energy, wave-dominated, microtidal coastline. Vertical stacking of progressively shallower water facies indicates progradation associated with slightly regressive conditions, prior to stranding of the succession above sea level. During a subsequent transgression to 5.5 or 6 m above present sea level, a second terrace was cut across the existing facies, which by then were partly lithified. A boulder beach (Facies 8) deposited on this terrace is indicative of high wave energy and a rocky coastline, formed by existing cemented coastal facies. Comparison with dated deposits from other parts of the South African coast suggest a Late Pleistocene age for Facies 2–8. Deposition was terminated by subsequent regression and continuing low sea levels during the remainder of the Pleistocene. Cementation of the facies took place almost entirely by carbonate precipitation. The presence of isopachous fibrous cements suggests early cementation of Facies 1, 2, 3 and 4 under marine conditions, initially as aragonite which has since inverted to calcite. Facies 5, 6 and 7 are cemented only by equant calcite spar, evidence of cementation in the meteoric phreatic and vadose zones. Lowering of the water table during regression caused the remaining pore space in Facies 1, 2, 3 and 4 to be filled with equant calcite spar. Decementation in a 130 cm wide zone is attributed to water table shifts associated with the later transgression which deposited Facies 8. The vertical stacking of the two depositional sequences may be attributed to rapid cementation of Facies 2, 3, 4, 5, 6 and 7 under humid, subtropical conditions. This lithified sequence then acted as a focus for deposition of coarse-grained shoreline facies (Facies 8) during the subsequent transgression.

Marine Geology↗