USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Journal of Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources
USGS2023

The usability gap in water resources open data and actionable science initiatives

The open data movement represents a major advancement for informed water management. Data that are findable, accessible, interoperable, and reusable—or FAIR —are now prerequisite to responsible data stewardship. In contrast to FAIR, accessibility and usability case studies and guidelines designed around human access and understanding are lacking in the literature, especially for water resources. Such decision support guidelines are critical because (i) inherent visual design trade-offs are not best made using intuition or feedback (perceived preference), and (ii) choosing designs requires a nuanced understanding of why and how the design works (revealed effectiveness). Thus, the goal of this commentary is to highlight knowledge gaps and discuss a general usability testing method which can be applied to any water resources decision support product. The user-testing approach includes (i) interviews about visualization goals, audiences, and the uses and decisions made with the data products, (ii) diagnosis of usability challenges, and (iii) redesign of decision support products given best practices and control versus treatment with intended end-user audiences. We illustrate the method using high-profile U.S. Geological Survey water science products. In sum, optimizing and testing for usability and understandability are as central to stakeholder use as FAIR standards are, and warrant being part of the development of data products and geovisualizations.

Journal of the American Water Resources Associatio↗
USGS1998

Military geology unit of the U.S. Geological Survey during World War II

On June 24, 1942, the temporary Military Geology Unit of the U.S. Geological Survey was formalized after the U.S. Army Corps of Engineers requested them to prepare terrain intelligence studies to meet wartime priorities. The entire Military Geology Unit wartime roster was 114 professionals, including 88 geologists, 11 soil scientists, and 15 other specialists; 14 were women. Assisting staff (illustrators, typists, photographers, and others) totaled 43. The unit produced 313 studies, including 140 major terrain folios, 42 other major special reports, and 131 minor studies. These reports contain about 5,000 maps, 4,000 photographs and figures, 2,500 large tables, and 140 terrain diagrams. Most products were designed in the beginning for general strategic planning in Washington and later for detailed strategic planning overseas; they utilized graphics and nontechnical, telegraphic-style tabular texts. The Military Geology Unit's principal effort was the preparation of the terrain folios titled Strategic Engineering Studies. They varied somewhat in content and format, but the key components usually were introduction, terrain appreciation, rivers, road and airfield construction, construction materials, and water resources. The folios, produced at an average rate of about one per week and at an average cost of $2,500, were compiled from scientific journals, books, maps, and photographs available in the Washington area by a team of 3 to 8 scientists; 8 to 12 teams might be working concurrently. MGU personnel took great pride in never having missed a delivery deadline.

Book chapter↗
USGS2015

Assessing the geologic and climatic forcing of biodiversity and evolution surrounding the Gulf of California

For almost a century the Baja California peninsula (Peninsula), Gulf of California (Gulf), and broader Sonoran Desert region (figure 1) have drawn geologists and biologists alike to study its unique physical and evolutionary processes (e.g., Wittich 1920; Darton 1921; Nelson 1921; Johnston 1924; Beal 1948; Durham and Allison 1960). The challenge remains to untangle the long, intricate, and at times enigmatic geological and climatological histories that have shaped the high levels of endemism and biodiversity observed in the region today (Van Devender 1990; Grismer 2000; Riddle et al. 2000).

Gulf of California↗
USGS2015

Book review: Rare earth elements—A new approach to the nexus of supply, demand and use: exemplified along the use of neodymium in permanent magnets

This book is part of the “Springer Theses” published by Springer, a book series designed to highlight and share outstanding Ph.D. research. As explained by Springer (on the second page), this series “brings together a selection of the very best Ph.D. theses from around the world and across the physical sciences.” I admire Springer for this endeavor because a large number of exceptional theses are never published, and thus are difficult to obtain, while most of those that are published are presented only in highly condensed form as journal articles. Review info: Rare Earth Elements—A New Approach to the Nexus of Supply, Demand and Use: Exemplified Along the Use of Neodymium in Permanent Magnets . By Volker Zerf. 2013. ISBN 978-3-642-35457-1. 157 pp.

Economic Geology↗
USGS2001

Factors controlling the configuration of the fresh-saline water interface in the Dead Sea coastal aquifers: Synthesis of TDEM surveys and numerical groundwater modeling

TDEM (time domain electromagnetic) traverses in the Dead Sea (DS) coastal aquifer help to delineate the configuration of the interrelated fresh-water and brine bodies and the interface in between. A good linear correlation exists between the logarithm of TDEM resistivity and the chloride concentration of groundwater, mostly in the higher salinity range, close to that of the DS brine. In this range, salinity is the most important factor controlling resistivity. The configuration of the fresh-saline water interface is dictated by the hydraulic gradient, which is controlled by a number of hydrological factors. Three types of irregularities in the configuration of fresh-water and saline-water bodies were observed in the study area: 1. Fresh-water aquifers underlying more saline ones ("Reversal") in a multi-aquifer system. 2. "Reversal" and irregular residual saline-water bodies related to historical, frequently fluctuating DS base level and respective interfaces, which have not undergone complete flushing. A rough estimate of flushing rates may be obtained based on knowledge of the above fluctuations. The occurrence of salt beds is also a factor affecting the interface configuration. 3. The interface steepens towards and adjacent to the DS Rift fault zone. Simulation analysis with a numerical, variable-density flow model, using the US Geological Survey's SUTRA code, indicates that interface steep- ening may result from a steep water-level gradient across the zone, possibly due to a low hydraulic conductivity in the immediate vicinity of the fault.

Hydrogeology Journal↗
USGS1969

Hydrology of carbonate rock terranes — A review: With special reference to the United States

Limestone and other carbonate rocks are characterized by many unusual features and extreme conditions, either involving the hydrologic system within them or wrought by hydrologic conditions on them or through them. Perhaps there could be little agreement as to what is typical or average for the many features of carbonate rocks, as indicated by the following conditions: bare rock and thin soils are common, but so are thick soils; very highly permeable limestones are common, but so are poorly permeable ones; and rugged karst topographic features with underlying solution caverns are common, but so are flat, nearly featureless topographic conditions. Some conditions of carbonate terranes are suitable to man's needs and interests, such as the use of some permeable aquifers for water supply and the exploitation of caves for tourist attractions. On the other hand, many problems may exist, including: permeability too low for adequate water supply or so high that the aquifer retains too little water for use during periods of fair weather, soils too thin for growing of crops and for adequate filtration of wastes near the ground surface, instability of the ground for buildings and foundations in sinkhole areas, and unusually rugged topography. Some of the many variable conditions are readily observable, but others can be determined only by careful geologic and hydrologic studies. The need for knowing the specific geologic and hydrologic conditions at various places in limestone terranes, as well as the variations in hydrologic conditions with changing conditions and time, has resulted in many published reports on local areas and on special topical problems of limestone hydrology. Many of these reports have been used to advantage by the present writers in preparing this paper. The concept that secondary permeability is developed by circulation of water through openings with the accompanying enlargement of these openings by solution is now universally accepted in limestone terranes. Emphasis is placed on the hydrogeologic framework, or structural setting, in relation to the ease or difficulty of water to move from a source of recharge, through a part of the limestone, to a discharge area. Parts of the limestone favored by circulating ground water tend to develop solution openings, commonly in the upper part of the zone of saturation; as base level is lowered (sea level or perennial stream level), the related water table lowers in the limestone leaving air-filled caverns above the present zone of saturation in sinkhole areas. Reconstruction of the geologic and hydrologic history of a limestone area aids in determining the extent of development and the positions of fossil and present permeability. References are made to the hydrology of many limestone regions, especially those of the United States.

Journal of Hydrology↗
USGS2019

Estimating the pressure-limited dynamic capacity and costs of basin-scale CO2 storage in a Saline Formation

Deployment of carbon capture and storage (CCS) could be necessary to be able to satisfy baseload electricity demand, maintain diversity in the energy mix, and achieve mitigation of carbon dioxide (CO 2 ) emissions at lowest cost ( IPCC, 2015 ; U.S. DOE, 2016 ). If basin-, regional- or national-scale deployment of CCS is needed, it may be possible to store only a small fraction of the captured CO 2 in oil and natural gas reservoirs. The vast majority would likely have to be stored in saline formations. Pressure buildup as a result of injecting CO 2 into such reservoirs is expected to be an important source of risk associated with CO 2 storage, and could constrain dynamic storage capacities (maximum injection rates) to be far below estimates based on access to theoretical storage resources. Estimates of CO 2 storage costs based on an assumption of practical availability of the theoretical storage resource could lead to underestimation of the costs of CO 2 storage. In this study, simulation results suggest that the pressure-limited dynamic CO 2 storage capacity of the Mount Simon Sandstone could be less than 4% of the theoretical storage resource in this saline formation, and storage costs could be an order of magnitude higher than recent estimates. However, consideration of the geologic heterogeneity in this deep saline formation allowed definition of a high injectivity zone, and estimated costs of CO 2 storage in this “sweet spot” of the reservoir approached recent estimates that did not include costs for pressure management.

Illinois, Indiana, Kentucky↗
USGS2012

Compaction of basin sediments: Modeling based on time-temperature history

Porosity decrease of sandstones, carbonates, and shales during burial is modeled here in terms of time-temperature exposure rather than in terms of depth. Loss of porosity (ϕ) in the subsurface is represented by a power function, ϕ = A ( M ) B , where A and B are constants and M is a measure of integrated time-temperature history. Regression lines of carbonate and sandstone porosity upon Lopatin's time-temperature index of thermal maturity (TTI) generally fall within a rather narrow envelope whose axis is approximated by ϕ = 30(TTI) −0.33 . This equation is useful for regional modeling of carbonate and sandstone compaction. Dependence of porosity upon integrated time-temperature history implies that basin sediments are not in equilibrium but compact through geologic time. Calculations show that subsidence resulting from the loss of porosity with increasing time-temperature exposure (as opposed to deeper burial) can produce a second-stage, passively formed basin containing many hundreds of meters of sediments.

Journal of Geophysical Research Solid Earth↗
USGS1997

On the origin of diverse aftershock mechanisms following the 1989 Loma Prieta earthquake

We test the hypothesis that the origin at the diverse suite of aftershock mechanisms Following the 1989 M 7.1 Loma Prieta, California, earthquake is related to the post-main-shock static stress field We use a 3-D boundary-element algorithm to calculate static stresses combined with a Coulomb failure criterion to calculate conjugate failure planes at aftershock locations. The post-main-shock static stress field is taken as the of a sum of a pre-existing stress field and changes in stress due to the heterogeneous slip across the Loma Prieta rupture plane. The background stress field is assumed to be either a simple shear parallel to the regional trend of the San Andreas fault or approximately fault-normal compression A suite of synthetic aftershock mechanisms from the conjugate failure planes is generated and quantitatively compared (allowing for uncertainties in both mechanism parameters and earthquake locations) to well-constrained mechanisms reported in the US Geological Survey Northern California Seismic Network catalogue. We also compare calculated rakes with those observed by resolving the calculated stress tensor onto observed focal mechanism nodal planes, assuming either plane to be a likely rupture plane.

Geophysical Journal International↗
USGS1998

Mapping the Gulf of Maine with side-scan sonar: A new bottom-type classification for complex seafloors

The bedrock-framed seafloor in the northwestern Gulf of Maine is characterized by extreme changes in bathymetric relief and covered with a wide variety of surficial materials. Traditional methods of mapping cannot accurately represent the great heterogeneity of such a glaciated region. A new mapping scheme for complex seafloors, based primarily on the interpretation of side-scan sonar imagery, utilizes four easily recognized units: rock, gravel, sand and mud. In many places, however, the seafloor exhibits a complicated mixture or extremely 'patchy' distribution of the four basic units, which are too small to map individually. Twelve composite units, each a two-component mixture of the basic units, were established to represent this patchiness at a small scale (1:100,000). Using a geographic information system, these and all other available data (seismic profiles, grab samples, submersible dives and cores) were referenced to a common geographic base, superimposed on bathymetric contours and then integrated into surficial geologic maps of the regional inner continental shelf. This digital representation of the seafloor comprises a multidimensional, interactive model complete with explicit attributes (depth, bottom type) that allow for detailed analysis of marine environments.

Journal of Coastal Research↗
USGS1994

Bibliography of The World Energy Resources Program

The following publications were prepared in the course of World Energy Studies by program scientists. Most are open-file reports because we consider it our prime responsibility to get the program supporting data into the public record. Various of the authors have also seen fit to publish their work in refereed scientific journals and those publication outlets are also listed. The summation of the program work is reported in the proceedings volumes of the World Petroleum Congresses-see Global section of the bibliography. In those reports, petroleum resource data were aggregated by major petroleum resource countries. It is our intention to ultimately report resource data by petroleum basin in order to provide a closer tie of resource understanding and petroleum geology.

Open-File Report↗
USGS1981

Geological considerations in hazardous waste disposal

Present regulations assume that long-term isolation of hazardous wastes - including toxic chemical, biological, radioactive, flammable and explosive wastes - may be effected by disposal in landfills that have liners of very low hydraulic conductivity. In reality, total isolation of wastes in humid areas is not possible; some migration of leachate from wastes buried in the gound will always occur. Regulations should provide performance standards applicable on a site-by-site basis rather than rigid criteria for site selection and design. The performance standards should take into account several factors: (1) the categories, segregation, degradation and toxicity of the wastes; (2) the site hydrogeology, which governs the direction and rate of contaminant transport; (3) the attenuation of contaminants by geochemical interactions with geologic materials; and (4) the release rate of unattenuated pollutants to surface or groundwater. An adequate monitoring system is essential. The system should both test the extent to which the operation of the site meets performance standards and provide sufficient warning of pollution problems to allow implementation of remedial measures. In recent years there has been a trend away from numerous, small disposal sites toward fewer and larger sites. The size of a disposal site should be based on the attenuation capacity of the geologic material, which has a finite, though generally not well-defined, limit. For slowly degradable wastes, engineered sites with leachate-collection systems appear to be only a temporary solution since the leachate collected will also require final disposal.

Journal of Hydrology↗
USGS1992

Decomposition techniques

Sample decomposition is a fundamental and integral step in the procedure of geochemical analysis. It is often the limiting factor to sample throughput, especially with the recent application of the fast and modern multi-element measurement instrumentation. The complexity of geological materials makes it necessary to choose the sample decomposition technique that is compatible with the specific objective of the analysis. When selecting a decomposition technique, consideration should be given to the chemical and mineralogical characteristics of the sample, elements to be determined, precision and accuracy requirements, sample throughput, technical capability of personnel, and time constraints. This paper addresses these concerns and discusses the attributes and limitations of many techniques of sample decomposition along with examples of their application to geochemical analysis. The chemical properties of reagents as to their function as decomposition agents are also reviewed. The section on acid dissolution techniques addresses the various inorganic acids that are used individually or in combination in both open and closed systems. Fluxes used in sample fusion are discussed. The promising microwave-oven technology and the emerging field of automation are also examined. A section on applications highlights the use of decomposition techniques for the determination of Au, platinum group elements (PGEs), Hg, U, hydride-forming elements, rare earth elements (REEs), and multi-elements in geological materials. Partial dissolution techniques used for geochemical exploration which have been treated in detail elsewhere are not discussed here; nor are fire-assaying for noble metals and decomposition techniques for X-ray fluorescence or nuclear methods be discussed.

Journal of Geochemical Exploration↗
USGS2006

Geologic, hydrologic, and geochemical interpretations of mineral deposits as analogs for understanding transport of environmental contaminants

Base- and precious-metal mineral deposits comprise anomalous concentrations of metals and associated elements, which may be useful subjects for study as analogs for migration of environmental contaminants. In the geologic past, hydrothermal mineral deposits formed at the intersection of favorable geologic, hydrologic and geochemical gradients. In the present, weathering of these sulfide-rich deposits occurs as a result of the interplay between rates of oxygen supply versus rates of ground or surface-water flow. Transport and spatial dispersion of elements from a mineral deposit occurs as a function of competing rates of water flow versus rates of attenuation mechanisms such as adsorption, dilution, or (co)precipitation. In this paper we present several case studies from mineralized and altered sedimentary and crystalline aquifers in the western United States to illustrate the geologic control of ground-water flow and solute transport, and to demonstrate how this combined approach leads to a more complete understanding of the systems under study as well as facilitating some capability to predict major flow directions in aquifers.

Journal of Geochemical Exploration↗
USGS1998

Radar attenuation tomography using the centroid frequency downshift method

A method for tomographically estimating electromagnetic (EM) wave attenuation based on analysis of centroid frequency downshift (CFDS) of impulse radar signals is described and applied to cross-hole radar data. The method is based on a constant- Q model, which assumes a linear frequency dependence of attenuation for EM wave propagation above the transition frequency. The method uses the CFDS to construct the projection function. In comparison with other methods for estimating attenuation, the CFDS method is relatively insensitive to the effects of geometric spreading, instrument response, and antenna coupling and radiation pattern, but requires the data to be broadband so that the frequency shift and variance can be easily measured. The method is well-suited for difference tomography experiments using electrically conductive tracers. The CFDS method was tested using cross-hole radar data collected at the U.S. Geological Survey Fractured Rock Research Site at Mirror Lake, New Hampshire (NH) during a saline-tracer injection experiment. The attenuation-difference tomogram created with the CFDS method outlines the spatial distribution of saline tracer within the tomography plane.

Journal of Applied Geophysics↗
USGS1999

Assessment of Mars Pathfinder landing site predictions

Remote sensing data at scales of kilometers and an Earth analog were used to accurately predict the characteristics of the Mars Pathfinder landing site at a scale of meters. The surface surrounding the Mars Pathfinder lander in Ares Vallis appears consistent with orbital interpretations, namely, that it would be a rocky plain composed of materials deposited by catastrophic floods. The surface and observed maximum clast size appears similar to predictions based on an analogous surface of the Ephrata Fan in the Channeled Scabland of Washington state. The elevation of the site measured by relatively small footprint delay-Doppler radar is within 100 m of that determined by two-way ranging and Doppler tracking of the spacecraft. The nearly equal elevations of the Mars Pathfinder and Viking Lander 1 sites allowed a prediction of the atmospheric conditions with altitude (pressure, temperature, and winds) that were well within the entry, descent, and landing design margins. High-resolution (~38 m/pixel) Viking Orbiter 1 images showed a sparsely cratered surface with small knobs with relatively low slopes, consistent with observations of these features from the lander. Measured rock abundance is within 10% of that expected from Viking orbiter thermal observations and models. The fractional area covered by large, potentially hazardous rocks observed is similar to that estimated from model rock distributions based on data from the Viking landing sites, Earth analog sites, and total rock abundance. The bulk and fine-component thermal inertias measured from orbit are similar to those calculated from the observed rock size-frequency distribution. A simple radar echo model based on the reflectivity of the soil (estimated from its bulk density), and the measured fraction of area covered by rocks was used to approximate the quasi-specular and diffuse components of the Earth-based radar echos. Color and albedo orbiter data were used to predict the relatively dust free or unweathered surface around the Pathfinder lander compared to the Viking landing sites. Comparisons with the experiences of selecting the Viking landing sites demonstrate the enormous benefit the Viking data and its analyses and models had on the successful predictions of the Pathfinder site. The Pathfinder experience demonstrates that, in certain locations, geologic processes observed in orbiter data can be used to infer surface characteristics where those processes dominate over other processes affecting the Martian surface layer. Copyright 1999 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗
USGS2017

Satellite-tagged osprey nearly sets longevity record and productivity response to initial captures

We equipped adult Ospreys ( Pandion haliaetus ) from 24 nests in Oregon/Washington with satellite-tracked battery-powered radios, known as platform transmitter terminals (PTTs), in 1996–1999. These Ospreys from the lower Columbia River (river miles 76–286), and the Willamette Valley in western Oregon were part of a larger study of Osprey fall migration, wintering ecology, and spring migration, which included additional adults from the Upper Midwest and East Coast of the United States ( Martell et al. 2001 , 2014 , Washburn et al. 2014 ). These early-generation PTTs weighed 30–35 g (Microwave Telemetry Inc., Columbia, MD U.S.A.) and utilized the ARGOS tracking system ( www.argos-system.org ). We placed PTTs on the birds' backs using Teflon ribbon (Bally Ribbon, Bally, PA U.S.A.) in a standard backpack configuration ( Kenward 2001 ). With the mass of adult male Ospreys 1400 to 1500 g ( Poole et al. 2002 ), the ratio of tag mass to body mass was 2.0 to 2.5%. Ospreys also received a standard size 8 bird band (U.S. Geological Survey) on one leg and a numbered color band on the other. For more details on trapping techniques, attachment procedures, the battery-powered units, turn-on, turn-off cycles, and tracking equipment, see Martell et al. (2001) .

Oregon, Washington↗