USGS Science⌕ Search

SEARCH · USGS Science

Results for “Special Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources

Remote sensing in the USGS Mineral Resource Surveys Program in the eastern United States

Mineral deposits commonly occur within special geologic units or structures, such as fault zones, which can be detected and mapped from aircraft and satellite images. Modern techniques analyze multispectral images that record the way solar energy is reflected or emitted by the materials exposed at the Earth's surface. In sparsely vegetated regions, including most of the Western United States, mineral composition is determined directly by analyzing the spectral properties of rock outcrops. In more densely vegetated terrain, such as the Eastern United States, rock and soil composition can be determined directly in manmade exposures, such as plowed fields and construction sites, or much more general determinations can be made indirectly by analyzing the distribution and apparent health of naturally occurring plants. The association of certain plants with particular rock or soil types has been known for decades. For example, coniferous trees grow preferentially on well-drained sandy soil, whereas deciduous trees dominate on shaly bedrock. These two forest types reflect solar radiation quite differently and, therefore, are distinguished readily in conventional aerial photographs. More subtle plant-bedrock associations require digital multispectral image analysis to infer compositional information from the spectral characteristics of the forest canopy.

Information Handout↗

Status and understanding of groundwater quality in the South Coast Interior groundwater basins, 2008: California GAMA Priority Basin Project

Groundwater quality in the approximately 653-square-mile (1,691-square-kilometer) South Coast Interior Basins (SCI) study unit was investigated as part of the Priority Basin Project of the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The South Coast Interior Basins study unit contains eight priority groundwater basins grouped into three study areas, Livermore, Gilroy, and Cuyama, in the Southern Coast Ranges hydrogeologic province. The GAMA Priority Basin Project is being conducted by the California State Water Resources Control Board in collaboration with the U.S. Geological Survey (USGS) and the Lawrence Livermore National Laboratory. The GAMA South Coast Interior Basins study was designed to provide a spatially unbiased assessment of untreated (raw) groundwater quality within the primary aquifer system, as well as a statistically consistent basis for comparing water quality between basins. The assessment was based on water-quality and ancillary data collected by the USGS from 50 wells in 2008 and on water-quality data from the California Department of Public Health (CDPH) database. The primary aquifer system was defined by the depth intervals of the wells listed in the CDPH database for the SCI study unit. The quality of groundwater in the primary aquifer system may be different from that in the shallower or deeper water-bearing zones; shallow groundwater may be more vulnerable to surficial contamination. The first component of this study, the status of the current quality of the groundwater resource, was assessed by using data from samples analyzed for volatile organic compounds (VOCs), pesticides, and naturally occurring inorganic constituents, such as trace elements and minor ions. This status assessment is intended to characterize the quality of groundwater resources within the primary aquifer system of the SCI study unit, not the treated drinking water delivered to consumers by water purveyors. Relative-concentrations (sample concentration divided by the health- or aesthetic-based benchmark concentration) were used for evaluating groundwater quality for those constituents that have Federal or California regulatory or non-regulatory benchmarks for drinking-water quality. A relative-concentration greater than 1.0 indicates a concentration greater than a benchmark, and a relative-concentration less than or equal to 1.0 indicates a concentration equal to or less than a benchmark. Relative-concentrations of organic constituents and special-interest constituents were classified as “high” (relative-concentration greater than 1.0), “moderate” (relative-concentration greater than 0.1 and less than or equal to 1.0), or “low” (relative-concentration less than or equal to 0.1). Relative-concentrations of inorganic constituents were classified as “high” (relative-concentration greater than 1.0), “moderate” (relative-concentration greater than 0.5 and less than or equal to 1.0), or “low” (relative-concentration less than or equal to 0.5). Aquifer-scale proportion was used as the primary metric in the status assessment for evaluating regional-scale groundwater quality. High aquifer-scale proportion is defined as the percentage of the area of the primary aquifer system with a relative-concentration greater than 1.0 for a particular constituent or class of constituents; percentage is based on an areal rather than a volumetric basis. Moderate and low aquifer-scale proportions were defined as the areal percentage of the primary aquifer system with moderate and low relative-concentrations, respectively. Two statistical approaches—grid-based and spatially weighted—were used to evaluate aquifer-scale proportions for individual constituents and classes of constituents. Grid-based and spatially weighted estimates were comparable in the SCI study unit (within 90-percent confidence intervals). Inorganic constituents (one or more) with health-based benchmarks were detected at high relative-concentrations in 29 percent of the primary aquifer system, at moderate relative-concentrations in 37 percent, and at low relative-concentrations in 34 percent. High aquifer-scale proportions of inorganic constituents primarily reflected high aquifer-scale proportions of nitrate (14 percent), boron (8.6 percent), molybdenum (8.6 percent), and arsenic (5.7 percent). In contrast, the relative-concentrations of organic constituents (one or more) were high in 1.6 percent, moderate in 2.0 percent, and low or not detected in 96 percent of the primary aquifer system. Of the 207 organic and special-interest constituents analyzed for, 15 constituents were detected. Perchlorate was found at moderate relative-concentrations in 34 percent of the aquifer. Two organic constituents were frequently detected (in greater than 10 percent of samples): the trihalomethane chloroform and the herbicide simazine. The second component of this study, the understanding assessment, identified natural and human factors that may have affected groundwater quality by evaluating land use, physical characteristics of the wells, and geochemical conditions of the aquifer. This evaluation was done by using statistical tests of correlations between these potential explanatory factors and water-quality data. Concentrations of arsenic, molybdenum, and manganese were generally greater in anoxic and pre-modern groundwater than other groundwater. In contrast, concentrations of nitrate and perchlorate were significantly higher in oxic and modern groundwater. Concentrations of simazine were greater in modern than pre-modern groundwater. Chloroform detections were positively correlated with greater urban land use. Boron concentrations and chloroform detections were higher in the Livermore study area than in the other study areas of the SCI; total dissolved solids and sulfate concentrations were greater in the Cuyama study area.

California↗

Rare and endangered species of Hawai`i Volcanoes National Park; endangered, threatened, and rare animal, plant, and community handbook

Introduction Hawai`i Volcanoes National Park (HAVO) is the largest area in the State of Hawai`i protected for its geology and landscapes and its native flora and fauna. The park covers approximately 135,000 hectares or 333,000 acres in all. These lands stretch from the seacoast of Kīlauea Volcano to far above timberline on the summit of Mauna Loa (Figure 1). This vast area includes expanses of forests, woodlands, shrublands, and barren lava flows that represent an array of native ecosystems. Contained within these communities are a great many species of rare animals and plants, most of them unique to the island of Hawai`i, and some of them surviving only in the park. These are the biological treasures of Hawai`i Volcanoes National Park. Our book is a guide to all animal and plant species in HAVO that are specially recognized as endangered species in the general sense. (The official designations at four levels and the unofficial designation of species of concern are explained later.) There are 23 such animal species and 71 plant species covered in the handbook, including six species planted in HAVO but not naturally occurring. In addition, we describe seven rare communities. In some cases, HAVO offers the best opportunity to save these species and communities from extinction. Increasingly, the park has attempted to restore rare populations by conducting surveys to locate them, controlling threats such as feral livestock, and bolstering existing populations or creating new ones by planting nursery stock. To aid such efforts, our original intent was to publish an identification guide for researchers and field management personnel. Particularly, we wanted to familiarize the reader with the many rare plant species which otherwise are known mainly from the technical literature. Because we soon came to realize that this handbook would be useful to a much larger, general readership, our aim is to make this information available to anyone interested in endangered animals and plants at Hawai`i Volcanoes National Park.

Hawaii↗

Paleotectonic investigations of the Pennsylvanian System in the United States, Part I: Introduction and regional analyses of the Pennsylvanian System

The Pennsylvanian is the fourth geologic system to be analyzed and synthesized by geologists of the U.S. Geological Survey in the form of a paleotectonic study covering the conterminous United States. Earlier investigations were of the Jurassic, Triassic, and Permian Systems. Results were published as Miscellaneous Geologic Investigation Maps I-175, I-300, and I-450 and in Professional Paper 515. The objective of these investigations is to provide in graphic form the factual basis for recognition of tectonic events of each system on a countrywide scale. The maps in this publication depict rock thickness, generalized lithology, ancient geography, and other regional relations of the Pennsylvanian System. Method of preparation of the maps, the stratigraphic limits of the map units, and various stratigraphic and structural features and their probable tectonic significance are discussed. Pennsylvanian data were largely compiled between 1961 and 196 by 16 geologists, including the late Harold R. Wanless, who covered the five eastern regions and contributed to several of the special studies. The areas of responsibility of the cooperating geologists are indicated in figure 1. Work in Kansas was done by Gary F. Stewart, of the Kansas Geological Survey. Results of this investigation are presented in three units. Part I comprises an introduction and 17 chapters, each describing and discussing one of the regions in which the conterminous United States was divided for purposes of study and mapping. Part II is a synthesis of Pennsylvanian history to accompany interpretive maps of the five divisions of the Pennsylvanian System treated in this publication; it also includes a series of chapters on depositional environments, climatic conditions, and economic products of the system. The final section of part II is devoted to an index of localities and sources used in construction of the principal maps of this publication. Part III consists of the plates on which are presented the major maps and sections.

Professional Paper↗

FEMFLOW3D; a finite-element program for the simulation of three-dimensional aquifers; version 1.0

This document describes a computer program that simulates three-dimensional ground- water systems using the finite-element method. The program was developed to simulate regional ground-water systems, but it can be applied to small-scale problems as well. This program can be used to simulate both confined and water-table aquifers. The program simulates a linearized three-dimensional free-surface ground-water system with a fixed grid. FEMFLOW3D is applicable to the simulation of various free-surface ground-water systems for which the change in aquifer thickness is small relative to the overall aquifer thickness. The finite-element method provides flexibility in the design of a geometric grid that represents the physical dimensions of an aquifer system. For example, features that can be well represented with a finite-element grid include irregular, random geographic and geologic features; irregular boundaries; and increased detail within localized areas of particular interest within the study area. The structure of the computer program consists of a main program, which serves as a simple driver, and a set of subroutines in which the calculations are performed. The background, mathematical basis, structure, and inputs for each of the subroutines are described in the document where applicable. Each subroutine generally handles (1) a part of the mathematical calculations related to the finite-element method, (2) a specific feature of the hydrologic system, or (3) special features related to the management input or output data. Hydrologic features that can be represented with the program include stream-aquifer interactions, phreatophytic evapotranspiration, highly permeable fault zones, land subsidence, and land-aquifer interactions associated with land-use activities. The program can also represent the primary features associated with complex irrigation systems, such as irrigated agriculture, and can calculate the ground-water recharge that results from these activities. Three boundary conditions, including specified-head boundaries, specified-flux boundaries, and variable-flux boundaries, can be represented with the program. The program also provides a method for identifying aquifer and river-bed parameters that can be used in the calibration of models. This document also includes model validation, source code, and example input and output files. Model validation was performed using four test problems. For each test problem, the results of a model simulation with FEMFLOW3D were compared with either an analytic solution or the results of an independent numerical approach. The source code, written in the ANSI x3.9-1978 FORTRAN standard, and the complete input and output of an example problem are listed in the appendixes.

Open-File Report↗

Remote sensing studies of the geomorphology of Surtsey, 1987-1991

The volcanic island of Surtsey, formed by explosive submarine and effusive subaerial eruptions between November 1963 and June 1967, consists of a complex combination of primary and redeposited tephra and alkaline olivine basalt lava flows in a 2.5 km 2 area (Thorarinsson, 1967; Thorarinsson et al., 1964; Fridriksson, 1975). During the past 24 years, wave and wind erosion of this subaerial mid-ocean ridge (MOR) vent complex have modified Surtsey's coastal morphology, including the deposition of a 0.5 km-long northern peninsula ( ness ) composed of tephra and rounded lava fragments derived from the southern half of the island. Detailed geomorphologic and sedimentologic mapping of the various surface units now present on Surtsey has been accomplished throughout the history of the evolving island, most recently by Calles et al. (1980) and Ingolfsson (1980). On the basis of these studies, an effort to quantify the topographic characteristics of the primary geomorphic units on the island was initiated by the National Aeronautics and Space Administration (NASA) and the United States Geological Survey (USGS) in 1987. The objective has been to directly measure the microtopographic properties of the widest range of surface types possible, with special emphasis on the pristine or dynamic types. While large-scale topographic maps of Surtsey were prepared in 1968 and 1975 (Norrman, 1980; Norrman and Erlingsson, 1991; Calles et al, 1980), and geodetic leveling surveys have been carried out (Moore, 1980), there have been no recent attempts to geodetically determine the local topography of the island. Because of the rapid rates of geomorphic processes, such as erosion and deposition, on a small, geologically isolated volcanic island such as Surtsey, it is desirable to determine the meter-scale topographic character of its surface units and landforms, and later a remeasurement of the same surfaces to further quantify volumetric change, subsidence, and process rates. In addition, precise measurements of sub-meter-scale topography of pristine geologic surfaces provides necessary data for the investigation of whether various geologic processes demonstrate fractal or self-affine behavior at a range of length-scales within the interval 0.1 in to 1 km. Thus Surtsey offers a unique opportunity to apply new remote sensing techniques to the measurement of the evolving surface "roughness" characteristics of pristine geologic surfaces within an historically well-monitored environment.

Surtsey Research Progress Report↗

Evolution of the western part of the Coast plutonic–metamorphic complex, South-Eastern Alaska, USA: A summary

The western Cordillera of North America extends for over 6000 km from the tip of Baja California to the Alaska Range. It includes a wide variety of metamorphic and plutonic terrains, but none is more spectacular scenically or geologically than the Coast plutonic-metamorphic complex (Brew & Ford 1984) of western Canada and south-eastern Alaska. This report briefly describes the evolution of the western part of the complex, integrating information from the deformational, plutonic and metamorphic events. Most of the original studies are reported by the authors in U.S. Geological Survey Circular numbers 733, 751, 823-B, 868, 939, 945, 967 and 978, and are not cited specifically here. This summary does not contain either a comprehensive bibliography or a comparison of the metamorphic histories of south-eastern Alaska with the adjacent parts of British Columbia. The Coast plutonic-metamorphic complex is here divided into three major elements: the western metamorphic, the central granitic and the eastern metamorphic zones (Fig. 1). The western metamorphic belt is extremely long (900 km), and narrow (7–25 km). It consists of regional dynamothermally and regional thermally metamorphosed rocks with mineral assemblages ranging from prehnite-pumpellyite to upper amphibolite facies, scattered mesozonal to epizonal granitic bodies, and a few concentrically zoned mafic-ultramafic masses. The metamorphic grade and the amount of deformation increase from south-west to north-east, culminating at, or slightly to the north-east of, the ‘great tonalite sill’: a remarkable 700-km-long, 3- to 25-km-wide vertical to northeast-dipping belt of mostly syntectonic plutons of approximately the same age, composition and structural

Alaska↗

Topographic map of the northwest Loire Valles region of Mars MTM 500k -15/337E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. MTM 500k –15/337E OMKT: Abbreviation for Mars Transverse Mercator; 1:500,000 series; center of sheet latitude 15° S., longitude 337.5° E. in planetocentric coordinate system (this corresponds to –15/022; latitude 15° S., longitude 22.5° W. in planetographic coordinate system); orthophotomosaic (OM) with color coded (K) topographic contours and nomenclature (T) [Greeley and Batson, 1990]. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km (Kirk and others, 2000). The datum (the 0–km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter (Smith and others, 2001). The image base for this map employs Viking Orbiter images from orbit 651. An orthophotomosaic was created on the digital photogrammetric workstation using the DTM compiled from stereo models. Integrated Software for Imagers and Spectrometers (ISIS) (Torson and Becker, 1997) provided the software to project the orthophotomosaic into the Transverse Mercator Projection.

IMAP↗

Topographic map of the Southeast Loire Valles region of Mars MTM 500k -20/347E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. MTM 500k –20/347E OMKT: Abbreviation for Mars Transverse Mercator; 1:500,000 series; center of sheet latitude 20° S., longitude 347.5° E. in planetocentric coordinate system (this corresponds to –20/012; latitude 20° S., longitude 12.5° W. in planetographic coordinate system); orthophotomosaic (OM) with color coded (K) topographic contours and nomenclature (T) [Greeley and Batson, 1990]. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km (Kirk and others, 2000). The datum (the 0–km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter (Smith and others, 2001). The image base for this map employs Viking Orbiter images from orbit 651. An orthophotomosaic was created on the digital photogrammetric workstation using the DTM compiled from stereo models. Integrated Software for Imagers and Spectrometers (ISIS) (Torson and Becker, 1997) provided the software to project the orthophotomosaic into the Transverse Mercator Projection.

IMAP↗

Topographic map of the Parana Valles region of Mars MTM 500k -25/337E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. MTM 500k –25/347E OMKT: Abbreviation for Mars Transverse Mercator; 1:500,000 series; center of sheet latitude 25° S., longitude 347.5° E. in planetocentric coordinate system (this corresponds to –25/012; latitude 25° S., longitude 12.5° W. in planetographic coordinate system); orthophotomosaic (OM) with color coded (K) topographic contours and nomenclature (T) [Greeley and Batson, 1990]. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km (Kirk and others, 2000). The datum (the 0-km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter (Smith and others, 2001). The image base for this map employs Viking Orbiter images from orbit 651. An orthophotomosaic was created on the digital photogrammetric workstation using the DTM compiled from stereo models. Integrated Software for Imagers and Spectrometers (ISIS) (Torson and Becker, 1997) provided the software to project the orthophotomosaic into the Transverse Mercator Projection.

IMAP↗

Topographic Map of the West Candor Chasma Region of Mars, MTM 500k -05/282E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km. The datum (the 0-km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter. The projection is part of a Mars Transverse Mercator (MTM) system with 20? wide zones. For the area covered by this map sheet the central meridian is at 290? E. (70? W.). The scale factor at the central meridian of the zone containing this quadrangle is 0.9960 relative to a nominal scale of 1:500,000. Longitude increases to the east and latitude is planetocentric as allowed by IAU/IAG standards and in accordance with current NASA and USGS standards. A secondary grid (printed in red) has been added to the map as a reference to the west longitude/planetographic latitude system that is also allowed by IAU/IAG standards and has been used for previous Mars maps.

IMAP↗

Topographic map of the Tithonium Chasma Region of Mars, MTM 500k -05/277E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km. The datum (the 0-km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter. The projection is part of a Mars Transverse Mercator (MTM) system with 20? wide zones. For the area covered by this map sheet the central meridian is at 270? E. (70? W.). The scale factor at the central meridian of the zone containing this quadrangle is 0.9960 relative to a nominal scale of 1:500,000. Longitude increases to the east and latitude is planetocentric as allowed by IAU/IAG standards and in accordance with current NASA and USGS standards. A secondary grid (printed in red) has been added to the map as a reference to the west longitude/planetographic latitude system that is also allowed by IAU/IAG standards and has been used for previous Mars maps.

IMAP↗

Topographic Map of the Ophir and Central Candor Chasmata Region of Mars MTM 500k -05/287E OMKT

This map, compiled photogrammetrically from Viking Orbiter stereo image pairs, is part of a series of topographic maps of areas of special scientific interest on Mars. The figure of Mars used for the computation of the map projection is an oblate spheroid (flattening of 1/176.875) with an equatorial radius of 3396.0 km and a polar radius of 3376.8 km. The datum (the 0-km contour line) for elevations is defined as the equipotential surface (gravitational plus rotational) whose average value at the equator is equal to the mean radius as determined by Mars Orbiter Laser Altimeter. The projection is part of a Mars Transverse Mercator (MTM) system with 20? wide zones. For the area covered by this map sheet the central meridian is at 290? E. (70? W.). The scale factor at the central meridian of the zone containing this quadrangle is 0.9960 relative to a nominal scale of 1:500,000. Longitude increases to the east and latitude is planetocentric as allowed by IAU/IAG standards and in accordance with current NASA and USGS standards. A secondary grid (printed in red) has been added to the map as a reference to the west longitude/planetographic latitude system that is also allowed by IAU/IAG standards and has been used for previous Mars maps.

IMAP↗

Potential hydrologic impacts of a tar-sand industry in 11 special tar sand areas in eastern Utah

About 93 percent of the Nation 's estimated 30 billion barrels of crude oil in tar sand deposits is in 11 tar-sand deposits in eastern Utah that were chosen for leasing by the Federal government. The Tar Sand Triangle area, which contains about 15 billion barrels of oil, is the largest. This area and the Sunnyside and P R Springs areas contain more than three-fourths of the Utah reserves. About 88,000 acre-feet of water per year would be required for a commercial tar-sand industry producing about 365,000 barrels per day. At this rate, most of the recoverable oil would be mined within 30 years. About 22,000 acre-feet of water per year would be required for a commercial tar-sand industry producing about 83,000 barrels per day. Impacts on local hydrology would be greatest in the Tar Sand Triangle, Sunnyside, and P R Springs areas. Impacts could be minimized with proper construction of surface facilities to decrease erosion, sediment transport, and impoundment of mining and retort water. Increases in salinity of the Colorado River at Imperial Dam, Ariz.-Calif., could be about 3 milligrams per liter, with a peak of 9 milligrams per liter, for a 365 ,000-barrel-per-day industry and less than 1 milligram per liter , with a peak of 2 milligrams per liter, for an 83 ,000-barrel-per-day industry. (USGS)

Water-Resources Investigations Report↗

Guides to some volcanic terranes in Washington, Idaho, Oregon, and Northern California

This guidebook arose out of a series of field trips held in conjunction with the Pacific Northwest American Geophysical Union meeting held in Bend, Oregon, September 1979. The PNAGU meeting included special volcanology sessions planned by William I. Rose, Jr., Bruce A. Nolf, amd David A. Johnston. Publication of the guidebook volume was originally planned for early 1980 by the Oregon Department of Geology and Mineral Industries (DOGAMI). Inevitable delays, subsequent scheduling problems, and the death of Dave Johnston in the May 18 eruption of Mount St. Helens led to this publication as a USGS Circular. This circular differs from typical U.S. Geological Survey compilations in that not all these papers have been examined by the Geologic Names Committee of the Survey. This Committee is charged with ensuring consistent usage of formational and other stratigraphic names in U.S. Geological Survey publications. Because many of the contributions are from workers outside the Survey, review by the Geologic Names Committee would have been inappropriate. Each author provided camera-ready pages, and the articles have not been edited for uniformity of style or usage. The contributions are generally ordered so as to describe the areas from north to south. Typically, the roadlog comes after the descriptive article except in the case of the Medicine Lake Highland articles, for which the road log is first and several topical contributions follow.

California, Idaho, Oregon, Washington↗

Forest and flooding with special reference to the White River and Ouachita River basins, Arkansas

The observed response of trees to hydrologic stress and distribution of trees in relation to habitat indicate that flooding, ground-water level, soil moisture, soil factors, and drainage characteristics exert a strong influence on bottomland forest species distribution. The dominant hydrologic factor influencing the distribution of bottomland tree species is flooding. Individual tree species are distributed as a function of frequency and duration of flooding. In the lower White and Ouachita River basins, the flood plains consist of a series of terraces, progressively higher terraces having less frequent flooding and less duration of flooding, and a significantly different composition of forest tree species. The sites studied can be divided into four basic groups and several subgroups on the basis of flood characteristics. On Group I (water hickory-overcup oak) sites, flooded near annually 32 to 40 percent of the time, the dominant species are water hickory and overcup oak. On Group II (nuttall oak) sites, flooded near annually 10 to 21 percent of the time, a more varied flora exists including nuttall oak, willow oak, sweetgum, southern hackberry, and American elm. The third group (Group III or shagbark hickory-southern red oak) of sites is flooded at intervals from 2 to 12 years. This group includes southern red oak, shagbark hickory, and black gum. The presence of blackjack oak in addition to Group III species marks Group IV (not flooded in historic time). (Kosco-USGS)

Arkansas↗

Effects of management practices on grassland birds: Eastern Meadowlark

Information on the habitat requirements and effects of habitat management on grassland birds were summarized from information in more than 4,000 published and unpublished papers. A range map is provided to indicate the relative densities of the species in North America, based on Breeding Bird Survey (BBS) data. Although birds frequently are observed outside the breeding range indicated, the maps are intended to show areas where managers might concentrate their attention. It may be ineffectual to manage habitat at a site for a species that rarely occurs in an area. The species account begins with a brief capsule statement, which provides the fundamental components or keys to management for the species. A section on breeding range outlines the current breeding distribution of the species in North America, including areas that could not be mapped using BBS data. The suitable habitat section describes the breeding habitat and occasionally microhabitat characteristics of the species, especially those habitats that occur in the Great Plains. Details on habitat and microhabitat requirements often provide clues to how a species will respond to a particular management practice. A table near the end of the account complements the section on suitable habitat, and lists the specific habitat characteristics for the species by individual studies. A special section on prey habitat is included for those predatory species that have more specific prey requirements. The area requirements section provides details on territory and home range sizes, minimum area requirements, and the effects of patch size, edges, and other landscape and habitat features on abundance and productivity. It may be futile to manage a small block of suitable habitat for a species that has minimum area requirements that are larger than the area being managed. The Brown-headed Cowbird (Molothrus ater) is an obligate brood parasite of many grassland birds. The section on cowbird brood parasitism summarizes rates of cowbird parasitism, host responses to parasitism, and factors that influence parasitism, such as nest concealment and host density. The impact of management depends, in part, upon a species’ nesting phenology and biology. The section on breeding-season phenology and site fidelity includes details on spring arrival and fall departure for migratory populations in the Great Plains, peak breeding periods, the tendency to renest after nest failure or success, and the propensity to return to a previous breeding site. The duration and timing of breeding varies among regions and years. Species’ response to management summarizes the current knowledge and major findings in the literature on the effects of different management practices on the species. The section on management recommendations complements the previous section and summarizes specific recommendations for habitat management provided in the literature. If management recommendations differ in different portions of the species’ breeding range, recommendations are given separately by region. The literature cited contains references to published and unpublished literature on the management effects and habitat requirements of the species. This section is not meant to be a complete bibliography; a searchable, annotated bibliography of published and unpublished papers dealing with habitat needs of grassland birds and their responses to habitat management is posted at the Web site mentioned below. This report has been downloaded from the Northern Prairie Wildlife Research Center WorldWide Web site, www.npwrc.usgs.gov/resource/literatr/grasbird/grasbird.htm. Please direct comments and suggestions to Douglas H. Johnson, Northern Prairie Wildlife Research Center, U.S. Geological Survey, 8711 37th Street SE, Jamestown, North Dakota 58401; telephone: 701- 253-5539; fax: 701-253-5553; e-mail: Douglas_H_Johnson@usgs.gov.

Report↗

Effects of management practices on grassland birds: Henslow's sparrow

Information on the habitat requirements and effects of habitat management on grassland birds were summarized from information in more than 4,000 published and unpublished papers. A range map is provided to indicate the relative densities of the species in North America, based on Breeding Bird Survey (BBS) data. Although birds frequently are observed outside the breeding range indicated, the maps are intended to show areas where managers might concentrate their attention. It may be ineffectual to manage habitat at a site for a species that rarely occurs in an area. The species account begins with a brief capsule statement, which provides the fundamental components or keys to management for the species. A section on breeding range outlines the current breeding distribution of the species in North America, including areas that could not be mapped using BBS data. The suitable habitat section describes the breeding habitat and occasionally microhabitat characteristics of the species, especially those habitats that occur in the Great Plains. Details on habitat and microhabitat requirements often provide clues to how a species will respond to a particular management practice. A table near the end of the account complements the section on suitable habitat, and lists the specific habitat characteristics for the species by individual studies. A special section on prey habitat is included for those predatory species that have more specific prey requirements. The area requirements section provides details on territory and home range sizes, minimum area requirements, and the effects of patch size, edges, and other landscape and habitat features on abundance and productivity. It may be futile to manage a small block of suitable habitat for a species that has minimum area requirements that are larger than the area being managed. The Brown-headed Cowbird (Molothrus ater) is an obligate brood parasite of many grassland birds. The section on cowbird brood parasitism summarizes rates of cowbird parasitism, host responses to parasitism, and factors that influence parasitism, such as nest concealment and host density. The impact of management depends, in part, upon a species’ nesting phenology and biology. The section on breeding-season phenology and site fidelity includes details on spring arrival and fall departure for migratory populations in the Great Plains, peak breeding periods, the tendency to renest after nest failure or success, and the propensity to return to a previous breeding site. The duration and timing of breeding varies among regions and years. Species’ response to management summarizes the current knowledge and major findings in the literature on the effects of different management practices on the species. The section on management recommendations complements the previous section and summarizes specific recommendations for habitat management provided in the literature. If management recommendations differ in different portions of the species’ breeding range, recommendations are given separately by region. The literature cited contains references to published and unpublished literature on the management effects and habitat requirements of the species. This section is not meant to be a complete bibliography; a searchable, annotated bibliography of published and unpublished papers dealing with habitat needs of grassland birds and their responses to habitat management is posted at the Web site mentioned below. This report has been downloaded from the Northern Prairie Wildlife Research Center WorldWide Web site, www.npwrc.usgs.gov/resource/literatr/grasbird/grasbird.htm. Please direct comments and suggestions to Douglas H. Johnson, Northern Prairie Wildlife Research Center, U.S. Geological Survey, 8711 37th Street SE, Jamestown, North Dakota 58401; telephone: 701- 253-5539; fax: 701-253-5553; e-mail: Douglas_H_Johnson@usgs.gov.

Report↗