USGS Science⌕ Search

SEARCH · USGS Science

Results for “Sedimentary Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources
USGS1997

Gas hydrate resources of northern Alaska

Large amounts of natural gas, composed mainly of methane, can occur in arctic sedimentary basins in the form of gas hydrates under appropriate temperature and pressure conditions. Gas hydrates are solids, composed of rigid cages of water molecules that trap molecules of gas. These substances are regarded as a potential unconventional source of natural gas because of their enormous gas-storage capacity. Most published gas hydrate resource estimates are highly simplified and based on limited geological data. The gas hydrate resource assessment for northern Alaska presented in this paper is based on a "play analysis" scheme, in which geological factors controlling the accumulation and preservation of gas hydrates are individually evaluated and risked for each hydrate play. This resource assessment identified two gas hydrate plays; the in-place gas resources within the gas hydrates of northern Alaska are estimated to range from 6.7 to 66.8 trillion cubic metres of gas (236 to 2,357 trillion cubic feet of gas), at the 0.50 and 0.05 probability levels respectively. The mean in-place hydrate resource estimate for northern Alaska is calculated to be 16.7 trillion cubic metres of gas (590 trillion cubic feet of gas). If this assessment is valid, the amount of natural gas stored as gas hydrates in northern Alaska could be almost seven times larger then the estimated total remaining recoverable conventional natural gas resources in the entire United States.

Alaska↗
USGS2012

Canada Basin revealed

More than 15,000 line-km of new regional seismic reflection and refraction data in the western Arctic Ocean provide insights into the tectonic and sedimentologic history of Canada Basin, permitting development of new geologic understanding in one of Earth's last frontiers. These new data support a rotational opening model for southern Canada Basin. There is a central basement ridge possibly representing an extinct spreading center with oceanic crustal velocities and blocky basement morphology characteristic of spreading centre crust surrounding this ridge. Basement elevation is lower in the south, mostly due to sediment loading subsidence. The sedimentary succession is thickest in the southern Beaufort Sea region, reaching more than 15 km, and generally thins to the north and west. In the north, grabens and half-grabens are indicative of extension. Alpha-Mendeleev Ridge is a large igneous province in northern Amerasia Basin, presumably emplaced synchronously with basin formation. It overprints most of northern Canada Basin structure. The seafloor and sedimentary succession of Canada Basin is remarkably flat-lying in its central region, with little bathymetric change over most of its extent. Reflections that correlate over 100s of kms comprise most of the succession and on-lap bathymetric and basement highs. They are interpreted as representing deposits from unconfined turbidity current flows. Sediment distribution patterns reflect changing source directions during the basin’s history. Initially, probably late Cretaceous to Paleocene synrift sediments sourced from the Alaska and Mackenzie-Beaufort margins. This unit shows a progressive series of onlap unconformities with a younging trend towards Alpha and Northwind ridges, likely a response to contemporaneous subsidence. Sediment source direction appeared to shift to the Canadian Arctic Archipelago margin for the Eocene and Oligocene, likely due to uplift of Arctic islands during the Eurekan Orogeny. The final stage of sedimentation appears to be from the Mackenzie-Beaufort region for the Miocene and Pliocene when drainage patterns shifted in the Yukon and Alaska to the Mackenzie valley. Upturned reflections at onlap positions may indicate syn-depositional subsidence. There is little evidence, at least at a regional seismic data scale, of contemporaneous or post-depositional sediment reworking, suggesting little large-scale geostrophic or thermohaline-driven bottom current activity.

Conference Paper↗
USGS2001

Geologic map and digital database of the Conejo Well 7.5 minute quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Conejo Well 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses part of the northern Eagle Mountains and part of the south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults in the Eagle Mountains and an east-west trending system of high-angle dip- and left-slip faults. In and adjacent to the Conejo Well quadrangle, faults of the northwest-trending set displace Miocene sedimentary rocks and basalt deposited on the Tertiary erosion surface and Pliocene and (or) Pleistocene deposits that accumulated on the oldest pediment. Faults of this system appear to be overlain by Pleistocene deposits that accumulated on younger pediments. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Conejo Well database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a point coverage containing line ornamentation, and (5) a scanned topographic base at a scale of 1:24,000. The coverages include attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗
USGS2017

Shear-wave velocity model from Rayleigh wave group velocities centered on the Sacramento/San Joaquin Delta

Rayleigh wave group velocities obtained from ambient noise tomography are inverted for an upper crustal model of the Central Valley, California, centered on the Sacramento/San Joaquin Delta. Two methods were tried; the first uses SURF96, a least-squares routine. It provides a good fit to the data, but convergence is dependent on the starting model. The second uses a genetic algorithm, whose starting model is random. This method was tried at several nodes in the model and compared to the output from SURF96. The genetic code is run five times and the variance of the output of all five models can be used to obtain an estimate of error. SURF96 produces a more regular solution mostly because it is typically run with a smoothing constraint. Models from the genetic code are generally consistent with the SURF96 code sometimes producing lower velocities at depth. The full model, calculated using SURF96, employed a 2-pass strategy, which used a variable damping scheme in the first pass. The resulting model shows low velocities near the surface in the Central Valley with a broad asymmetrical sedimentary basin located close to the western edge of the Central Valley near 122°W longitude. At shallow depths the Rio Vista Basin is found nestled between the Pittsburgh/Kirby Hills and Midland faults, but a significant basin also seems to exist to the west of the Kirby Hills fault. There are other possible correlations between fast and slow velocities in the Central Valley and geologic features such as the Stockton Arch, oil or gas producing regions and the fault-controlled western boundary of the Central Valley.

California↗
USGS2011

Late Pleistocene dune activity in the central Great Plains, USA

Stabilized dunes of the central Great Plains, especially the megabarchans and large barchanoid ridges of the Nebraska Sand Hills, provide dramatic evidence of late Quaternary environmental change. Episodic Holocene dune activity in this region is now well-documented, but Late Pleistocene dune mobility has remained poorly documented, despite early interpretations of the Sand Hills dunes as Pleistocene relicts. New optically stimulated luminescence (OSL) ages from drill cores and outcrops provide evidence of Late Pleistocene dune activity at sites distributed across the central Great Plains. In addition, Late Pleistocene eolian sands deposited at 20-25 ka are interbedded with loess south of the Sand Hills. Several of the large dunes sampled in the Sand Hills clearly contain a substantial core of Late Pleistocene sand; thus, they had developed by the Late Pleistocene and were fully mobile at that time, although substantial sand deposition and extensive longitudinal dune construction occurred during the Holocene. Many of the Late Pleistocene OSL ages fall between 17 and 14 ka, but it is likely that these ages represent only the later part of a longer period of dune construction and migration. At several sites, significant Late Pleistocene or Holocene large-dune migration also probably occurred after the time represented by the Pleistocene OSL ages. Sedimentary structures in Late Pleistocene eolian sand and the forms of large dunes potentially constructed in the Late Pleistocene both indicate sand transport dominated by northerly to westerly winds, consistent with Late Pleistocene loess transport directions. Numerical modeling of the climate of the Last Glacial Maximum has often yielded mean monthly surface winds southwest of the Laurentide Ice Sheet that are consistent with this geologic evidence, despite strengthened anticyclonic circulation over the ice sheet. Mobility of large dunes during the Late Pleistocene on the central Great Plains may have been the result of cold, short growing seasons with relatively low precipitation and low atmospheric CO2 that increased plant moisture stress, limiting the ability of vegetation to stabilize active dune sand. The apparent coexistence of large mobile dunes with boreal forest taxa suggests a Late Pleistocene environment with few modern analogs. ?? 2011 Elsevier Ltd.

Quaternary Science Reviews↗
USGS1979

Similarities between the thick-skinned Blue Ridge anticlinorium and the thin-skinned Powell Valley anticline

The Blue Ridge anticlinorium in northern Virginia is a part of an integrated deformational system spanning the area from the Piedmont to the Appalachian Plateaus. Deformation intensity within the system decreases from east to west. Differences of opinion have emerged concerning the central Appalachians as to whether the basement rocks exposed in the core of the Blue Ridge anticlinorium are rooted or are allochthonous. Available surface and subsurface stratigraphic and structural data suggest that the anticlinorium may be a rootless thick-skinned analogue to the rootless thin-skinned Powell Valley anticline in the Valley and Ridge. Both structures were produced during the Alleghenian orogeny by similar deformational processes. The form of the Powell Valley anticline is attributed to duplication of about 4,575 m (15,000 ft) of sedimentary rock during approximately 16 km (10 mi) of northwest movement above a subhorizontal décollement. Similarly, the form of the Blue Ridge anticlinorium is attributed to duplication of about 9,150 m (30,000 ft) of igneous, metamorphic, and sedimentary rock during a minimum of 59 km (37 mi) of northwest movement above an eastward continuation of a subhorizontal décollement within Cambrian sedimentary rocks beneath the Valley and Ridge. Thus, in northern Virginia there is a mixing of structural styles: the thick-skinned rootless Blue Ridge anticlinorium sits above a thin-skinned detachment. This relationship implies that thin- and thick-skinned styles are simply end members of a complex deformational process that includes a transition zone, where characteristics of both styles commingle. © 1979 Geological Society of America.

Virginia↗
USGS2000

New structural and stratigraphic insights for northwestern Pakistan from field and Landsat Thematic Mapper data

The remote Waziristan region of northwestern Pakistan includes outcrops of the India-Asia suture zone. The excellent exposure of the Waziristan ophiolite and associated sedimentary lithosomes and their inaccessibility made the use of Landsat Thematic Mapper (TM) data desirable in this study. Landsat TM data were used to create a spectral ratio image of bands 3/4, 5/4, and 7/5, displayed as red, green, and blue, respectively, and a principal component analysis image of bands 4, 5, and 7 (RGB). These images were interpreted in the context of available geologic maps, limited field work, and biostratigraphic, lithostratigraphic, and radiometric data. They were used to create a coherent geologic map of Waziristan and cross section of the area that document five tectonic units in the region and provide a new and more detailed tectonic history for the region. The lowest unit is comprised of Indian shelf sediments that were thrust under the Waziristan ophiolite. The ophiolite has been tectonically shuffled and consists of two separate tectonic units. The top thrust sheet is a nappe comprised of distal Triassic to Lower Cretaceous Neotethyan sediments that were underthrust during the Late Cretaceous by the ophiolite riding on Indian shelf strata. The uppermost unit contains unconformable Tertiary and younger strata. The thrust sheets show that the Waziristan ophiolite was obducted during Late Cretaceous time and imply that the Paleocene and Eocene deformation represents collision of India with the Kabul block and/or Asia.

Geological Society of America Bulletin↗
USGSDate not supplied

Seafloor studies of Mamala Bay, Honolulu, Hawaii

No comprehensive study of the effects of disposal of dredge spoils has been conducted to determine if the environment has suffered. The U.S. Army Corps of Engineers (USACE) has regularly dredged the shipping channels of Honolulu Harbor and Pearl Harbor for commercial and military purposes. The 5-year frequency for new dredging activity has led to the formation of extensive offshore wide deposits of relatively coarse sediments being created in a sedimentary environment that naturally collects much finer-grained materials. At the same time, the rapid growth of Honolulu and its suburban region over the past 3 decades has added nutrient-enriched sewage outfall to the artificially-heavy sediment load. The combined effects of dredge-spoil disposal and contaminant loads are not well-documented, and are poorly understood. The U.S. Geological Survey (USGS) began a comprehensive study to characterize the seafloor of Mamala Bay. In 1993, the USGS initiated a program sponsored by the USACE and the U.S. Environmental Protection Agency that produced a detailed map of the seafloor, especially of the distribution of dredge spoils, and a preliminary analysis of the environmental effects of dredge-spoils disposal and the chemical effects of the introduction of nutrient-rich outfall. Part of the work would involve sediment sampling, biological testing, and evaluation. Of particular interest is tissue sampling and analysis of endemic shrimp to determine the rates of absorption of toxic elements, such as heavy metals, that are easily brought into the food chain.

Hawaii↗
USGS1997

Overview of USGS sediment research and monitoring capabilities

For more than a century the USGS, as its name implies, has been the leading federal earth science research organization for the Nation. With the recent addition to the USGS of the National Biological Service in October 1996, as the Biological Resources Division, the mission of the USGS has broadened and the Survey's research capabilities are strengthened considerably. The USGS is now in a position to provide objective and credible scientific information across the fields of geology, geophysics, hydrology, geography, and biology and to provide the science information in an integrated and truly multidisciplinary manner. The subject of sediment is one that is critical to nearly every activity in the USGS and is becoming increasingly important to society and protecting, sustaining, and restoring the Nation's natural resources. The purpose of this workshop is to focus on this common denominator, sedimentary research, and bring together investigators to examine areas of expertise and collaboration on existing studies and to explore potential for future scientific interaction across all four of the divisions. A brief summary of sediment research capability for each division follows.

Conference Paper↗
USGS2004

Geologic Map of the Woodland Quadrangle, Clark and Cowlitz Counties, Washington

The Woodland 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 50 km north of Portland, Oregon (fig. 1). The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Woodland quadrangle lies at the northern edge of the Portland Basin, a roughly 2000-km2 topographic and structural depression that is the northernmost of several sediment-filled structural basins, which collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The Portland Basin is approximately 70 km long and 30 km wide; its long dimension is oriented northwest. Its northern boundary coincides, in part, with the lower Lewis River, which flows westward through the center of the quadrangle. The Lewis drains a large area in the southern Washington Cascade Range, including the southern flank of Mount St. Helens approximately 25 km upstream from the quadrangle, and joins the Columbia River about 6 km south of Woodland (fig. 1). Northwest of Woodland, the Columbia River exits the broad floodplain of the Portland Basin and flows northward through a relatively narrow bedrock valley at an elevation near sea level. The flanks of the Portland Basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but sediment deposited by streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction of the Pacific Plate along the Cascadia Subduction Zone (Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential field-anomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure may control the north-northwest-trending reach of the Columbia River between Portland and Longview (Blakely and others, 1995; Evarts, 2002; Evarts and others, 2002). This map is a contribution to a U.S. Geological Survey program designed to improve the geologic database for the Portland Basin part of the Pacific Northwest urban corridor,

Scientific Investigations Map↗
USGS1985

Reconnaissance geology of the Harrat Hutaymah Quadrangle, sheet 26/42A, Kingdom of Saudi Arabia

Harrat Hutaymah quadrangle is underlain mostly by Proterozoic rocks that are intruded and partly covered in the north by the Quaternary extrusive products of the Harrat Hutaymah basalt field. The Proterozoic basement of the quadrangle may be broadly divided into the older (circa 650 Ma and older) Laban dioritic complex in the east and the younger (to possibly coeval) Kilab monzogranite batholith in the west. The dioritic complex is overlain by a monoclinal section of mostly intermediate composition volcanic and sedimentary rocks in the southeast (the Hibshi formation - dated at circa 632 Ma). The source plutons for the Hibshi volcanic rocks are not well constrained; the volcanics may be comagmatic with late phases of the Kilab batholith. All of these rocks are intruded by a younger (post-orogenic and circa 600 Ma) suite of more evolved granitic plutons and dikes. Several of these evolved granites may represent the root-zones of volcanic caldera complexes. The Hibshi formation is divided into several members that are described in detail based on data from measured sections at the type section (Jibal Hibshi). There is considerable variation in composition and facies within the formation; individual members thicken and thin laterally, and some pinch out entirely over distances of only a few kilometers. Volcanic members at Jabal Hibshi are mostly andesitic to dacitic pyroclastic rocks, but at Jabal Aba al Liqah, basaltic and rhyolitic flow rocks predominate. The Hibshi formation consists of clastic sediments of volcanic and plutonic provenance intertonguing with the varied products of multiple subaerial volcanic centers. For these reasons, regional correlation based only on lithology is discouraged. The Harrat Hutaymah basalt field contains abundant basaltic tephra as well as alkali olivine basalt flows. Tuff rings formed by explosive eruptions above mantle diatremes. Peridotite nodules are common in the basaltic tuff and in some flow rocks. Basaltic volcanism in the region began at a later time (circa 1.8 Ma) than at the other Saudi Arabian harrats; probably due to progressive mantle underflow related to Red Sea rifting. Areas having mineral resource potential include the ancient Samirah gold mine, a quartz-vein deposit in Laban complex dioritic rocks, and areas with tin-tungsten potential in the evolved plutons. Aggregate and pozzolan deposits occur in the basaltic tephra of the Harrat Hutaymah volcanic field and unusually deep groundwater reservoirs are present in the filled tuff-ring craters of the volcanic field.

Open-File Report↗
USGS1967

Geology and ground water of the Savannah River Plant and vicinity, South Carolina

The area described in this report covers approximately 2,600 square miles in west-central South Carolina and includes the site of the Savannah River Plant, a major production facility of the U.S. Atomic Energy Commission. The climate, surface drainage, and land forms of the study area are typical of the southern part of the Atlantic Coastal Plain. Precipitation is normally abundant and fairly evenly distributed throughout the year, and the mean annual temperature is moderately warm (64?F). The major streams that drain the area (the Savannah, Salkehatchie, and Edisto Rivers) have low gradients and flow in a southeasterly direction toward the Atlantic Ocean. Surface features of the area include narrow, flat-bottomed, steep-sided valleys and broad gently rolling interfluvial areas. Those parts of the Coastal Plain included within the report area can be subdivided into the Aiken Plateau, the Congaree Sandhills, and the Coastal Terraces. The area is underlain by a sequence of unconsolidated and partly consolidated sediments of Late Cretaceous, Tertiary, and Quaternary age. The unconsolidated sediments were deposited unconformably on a basement of igneous and metamorphic rocks of Precambrian and Paleozoic age and sedimentary rocks of Triassic age. The basement rocks are similar to the granite-diorite complex of the Charlotte Belt, the metamorphosed rocks of the Carolina Slate Belt, and the consolidated sediments of the Newark Group. The unconsolidated sediments strike about N. 60 ? E. and dip 6-20 feet per mile to the southeast. They form a wedge-shaped mass that increases in thickness toward the southeast to slightly more than 1,200 feet in the vicinity of Allendale, S.C., on the southeast or downdip side of the study area. The oldest or lowermost unconsolidated sedimentary unit, the Tuscaloosa Formation of Late Cretaceous age, is overlain in the subsurface by beds that are also probably Late Cretaceous in age and that herein are named the Ellenton Formation. The Upper Cretaceous deposits are, in turn, overlain by the, McBean Formation and the Congaree(?) Formation of middle Eocene age, the Barnwell Formation of late Eocene age, the Hawthorn Formation of early and middle Miocene age, and by fluvial and marine(?) terrace deposits of Pliocene(?), Pleistocene, and Recent age. In the mapped area, the Congaree(?) Formation includes undifferentiated rocks (mostly Congaree and Barnwell Formations and some Mcbean outliers). (See map explanation.) Structurally, the Upper Cretaceous sediments are overlapped to the northwest by Tertiary deposits. A preliminary geologic map of the general area is included in the report. The principal aquifer in the area is composed of the beds of medium to coarse sand and gravel contained in the Tuscaloosa and Ellenton Formations. Subordinate aquifers include deposits of sand and limestone of Tertiary and Quaternary age. The ground water in the principal aquifer occurs under water-table conditions in the outcrop area of the Tuscaloosa Formation in the northern and western parts of the study area, but it is under artesian pressure downdip in the southern and eastern parts of the study area. Contours drawn on the piezometric surface of the water in the principal aquifer indicate that water is recharged to the aquifer mainly by leakage through the overlying Tertiary formations. Likewise, the piezometric contours show that the outcrop area of the Tuscaloosa Formation functions chiefly as an area of discharge. Doubtless, water is also discharged from the aquifer by moving downdip to areas near the coast where the prevailing hydraulic gradient may favor the upward leakage of water through the upper confining beds. The hydraulic properties of the principal aquifer were determined by a series of pumping tests. The results indicate that the aquifer is highly productive and could supply 15 million gallons per day in the vicinity of the Savannah River Plant without exceeding the available drawdown.

South Carolina↗
USGS2004

Geologic Map of the Saint Helens Quadrangle, Columbia County, Oregon, and Clark and Cowlitz Counties, Washington

The Saint Helens 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 35 km north Portland, Oregon. The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Saint Helens quadrangle lies in the northern part of the Portland Basin, a roughly 2000-km2 topographic and structural depression. It is the northernmost of several sediment-filled structural basins that collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The rhomboidal basin is approximately 70 km long and 30 km wide, with its long dimension oriented northwest. The Columbia River flows west and north through the Portland Basin at an elevation near sea level and exits through a confined bedrock valley less than 2.5 km wide about 16 km north of Saint Helens. The flanks of the basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but contributions from streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction along the Cascadia Subduction Zone Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential fieldanomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure, the Kalama Structural Zone of Evarts (2002), may underlie the north-northwest-trending reach of the Columbia River north of Woodland (Blakely and others, 1995). This map is a contribution to a U.S. Geological Survey (USGS) program designed to improve the geologic database for the Portland Basin region of the Pacific Northwest urban corridor, the populated forearc region of western Washington and Oregon. Better and more detailed information on the bedrock and surficial geology of the basin and its surrounding area is needed to refine assessments of seismic risk (Yelin and Patton, 1991; Bott and Wong, 1993), ground-failure hazards (Madin and Wang, 1999; Wegmann and Walsh, 2001) and resource availability in this rapid

Scientific Investigations Map↗
USGS1952

Geology of the Iron King Mine, Yavapai county, Arizona

The Iron King mine is about 2,000 feet west-northwest of the intersection of the 112 15 west meridian and the 34 30 north parallel in the Humboldt region in central Yavapai County , Arizona . The mine is approximately in the geographical center of the Humboldt region. Precambrian rocks form the bedrock. Late Cenozoic unconsolidated river wash and valley fill with some interbedded basalt locally mantle the Precambrian rocks, especially in the north-central part of the region. The Precambrian rocks consist of two metamorphosed volcanic formations and intrusive rocks that range in composition from quartz porphyry to gabbro. The volcanic formations originally were flows, volcanic breccias, and tuffaceous sedimentary rocks. Dynamothermal metamorphism of these rocks formed textures, structures, and mineral assemblages characteristic of low-grade ;riietamorphic rocks, but sufficient relict textures and structures remain to permit delineation of formations on the bases of their original nature. All the Precambrian rocks are foliated, except those in the interior parts of the larger intrusive masses. This foliation has two major trends, (1) north to N 20° W, and (2) N 20° E. The northeast-trending foliation is younger and locally is superimposed on the north- to northwest-trending foliation. The Precambrian rocks strike north to northwest and dip steeply, chiefly westward. Duplication of stratigraphic units and determination of tops suggest two major northeast-trending folds, which probably plunge southward. The northeast-trending foliation appears to bear an axial-plane relationship to these folds. Some masses of igneous rock probably were intruded during development of foliation. The Iron King deposit supports the only active mine in the Humboldt region. It consists of 12 steeply plunging echelon veins arranged along the footwall of a sheared and altered zone in the metamorphosed andesitic tuffaceous sedimentary rocks. Narrow zones of more intense shear probably localized the veins. Solutions first introduced quartz, pyrite, ankerite, and sericite, forming a sporadically mineralized zone (in the hanging wall of the deposit) and probably veins in the Iron King fracture system. Intra-mineralization shear strongly brecciated these early minerals and formed the structures that localized and distributed the ore minerals in the veins. After this deformation, sphalerite, galena, chalcopyrite, tennantite, arsenopyrite, pyrite, quartz, and ankerite were deposited; the last three minerals may have formed through solution and the redeposition of earlier minerals. Formation of sericite either accompanied or followed the deposition of ore-forming minerals. Silver is related closely in distribution to copper and probably is in the tennantite. Gold occurs chiefly in the pyrite. Banding, mimetic after foliation and planes developed by shearing, is pronounced in much of the vein material. Mineral zoning, generally similar in each vein, is a characteristic of the deposit. High-angle reverse faults of about 100 feet in maximum vertical separation offset the veins. These faults are nearly parallel to the veins in strike and dip.

Arizona↗
USGS2023

Thickness of the Saudi Arabian crust

As part of a joint Saudi Geological Survey (SGS) and U.S. Geological Survey (USGS) project, we analyzed P-wave receiver functions from seismic stations covering most of the Kingdom of Saudi Arabia to map the thickness of the crust across the Arabia Plate. We present an update of crustal-thickness estimates and fill in gaps for the western Arabian Shield and the rifted margin at the Red Sea (the coastal plain), as well as the eastern Arabian Platform. We applied a conventional H-k stacking algorithm and included careful attention to stacking weights, two forms of sedimentary corrections for stations located on the Arabian Platform, and additional processing for noisy stations. We obtained useful results at 154 stations from 898 teleseismic events over a 2-year period from 1995–1997 (for non-SGS stations) and a 6-year period from 2008–2014 (for SGS stations). Average crustal thickness (that is, depth to the Mohorovičić discontinuity [Moho] below the surface) beneath the Red Sea coastal plain (the rift margin) is 29 kilometers (km), beneath the volcanic fields (known in Arabic as harra [plural] or harrat [singular]) is 35 km, beneath the Arabian Shield (excluding harrats) is 37 km, and beneath the Arabian Platform is 38 km. Crustal thinning appears not to extend east of the rift escarpment, suggesting uniform extension that is no broader at depth than at the surface. In contrast to some previous claims that the Arabian Platform crust is thicker than that of the Arabian Shield, we find no statistically significant difference between their whole crustal thicknesses. However, the average subsedimentary crustal thickness (that is, the crystalline crust) for stations on the Arabian Platform is 34 km, 3 km thinner than the crust of the Arabian Shield. Individual station P-wave (pressure) velocity and S-wave (shear) velocity ratios ( V P / V S ) are highly variable for the Arabia Plate, ranging from 1.60 to 1.97 and averaging 1.75, with a standard deviation of 0.07. There are no statistically significant differences between V P / V S ratios of the different geologic regions of Saudi Arabia. Similar V P / V S ratios, coupled with similar crustal thicknesses for harrats and the Arabian Shield, indicate that Cenozoic magmatism has contributed negligibly to crustal growth.

Professional Paper↗
USGS2005

Paleoproterozoic Mojave Province in northwestern Mexico? Isotopic and U-Pb zircon geochronologic studies of Precambrian and Cambrian crystalline and sedimentary rocks, Caborca, Sonora

Whole-rock Nd isotopic data and U-Pb zircon geochronology from Precambrian crystalline rocks in the Caborca area, northern Sonora, reveal that these rocks are most likely a segment of the Paleoproterozoic Mojave province. Supporting this conclusion are the observations that paragneiss from the > or =1.75 Ga Bamori Complex has a 2.4 Ga Nd model age and contains detrital zircons ranging in age from Paleoproterozoic (1.75 Ga) to Archean (3.2 Ga). Paragneisses with similar age and isotopic characteristics occur in the Mojave province in southern California. In addition, "A-type" granite exposed at the southern end of Cerro Rajon has ca 2.0 Ga Nd model age and a U-Pb zircon age of 1.71 Ga, which are similar to those of Paleoproterozoic granites in the Mojave province. Unlike the U.S. Mojave province, the Caborcan crust contains ca. 1.1 Ga granite (Aibo Granite), which our new Nd isotopic data suggest is largely the product of anatexis of the local Precambrian basement. Detrital zircons from Neoproterozoic to early Cambrian miogeoclinal arenites at Caborca show dominant populations ca. 1.7 Ga, ca. 1.4 Ga, and ca. 1.1 Ga, with subordinate Early Cambrian and Archean zircons. These zircons were likely derived predominately from North American crust to the east and northeast, and not from the underlying Caborcan basement. The general age and isotopic similarities between Mojave province basement and overlying miogeoclinal sedimentary rocks in Sonora and southern California is necessary, but not sufficient, proof of the hypothesis that Sonoran crust is allochthonous and was transported to its current position during the Mesozoic along the proposed Mojave-Sonora megashear. One viable alternative model is that the Caborcan Precambrian crust is an isolated, autochthonous segment of Mojave province crust that shares a similar, but not identical, Proterozoic geological history with Mojave province crust found in the southwest United States.

Sonora↗
USGS2018

Overview of the geologic effects of the November 14, 2016, Mw 7.8 Kaikoura, New Zealand, earthquake

The November 14, 2016, Kaikoura, New Zealand, earthquake (moment magnitude [Mw] 7.8) triggered more than 10,000 landslides over an area of about 12,000 square kilometers in the northeastern part of the South Island of New Zealand. In collaboration with GNS Science (the Institute of Geological and Nuclear Science Limited), we conducted ground and helicopter reconnaissance of the affected areas and assisted in rapid hazard evaluation. The majority of the triggered landslides were shallow- to moderate-depth (1–10 meters), highly disrupted falls and slides in rock and debris from Lower Cretaceous graywacke sandstone in the Seaward Kaikoura Range. Deeper, more coherent landslides in weak Upper Cretaceous to Neogene sedimentary rock also were numerous in the gentler topography south and inland (west) of the Seaward Kaikoura Range. The principal ground-failure hazards from the earthquake were the hundreds of valley-blocking landslides, many of which impounded lakes and ponds that posed potential downstream flooding hazards. Both large and small landslides also blocked road and rail corridors in many locations, including the main north-south highway (State Highway 1), which was still closed in October 2017. As part of our investigation, we compared post-earthquake field observations to the output of models used to estimate near-real-time landslide probabilities following earthquakes. The models generally over-predicted landslide occurrence and thus need further refinement.

Kaikoura↗
USGS2020

Major hydrostratigraphic contacts of the Truxton basin and Hualapai Plateau, northwestern Arizona, developed from airborne electromagnetic data

The area surrounding the Grand Canyon has spectacular outcrop exposure in the modern canyon walls, leading to stratigraphic contact delineations that are well constrained near canyons yet poorly constrained where the terrain remains undissected and relatively unexplored by boreholes. An airborne electromagnetic and magnetic survey of the western Hualapai Indian Reservation and surrounding areas was undertaken to support the development of a three-dimensional hydrostratigraphic framework of the Truxton basin and Hualapai Plateau. These data were used to develop models of the resistivity structure with total depths of investigation ranging from 200 meters in the most conductive parts of the Truxton basin to more than 600 meters in the higher resistivity areas underlying the Hualapai Plateau. The modeled resistivity structure was used in conjunction with geologic maps, well lithologic records, and results from gravity models of the depth to bedrock to develop high-resolution regional interpretations of the elevation of the Muav Limestone-Bright Angel Shale contact and the top of the crystalline basement. These contacts are conceptualized to serve as the base of the Paleozoic limestone aquifers primarily underlying the Hualapai Plateau and the Tertiary-Quaternary sedimentary and volcanic aquifers of the Truxton basin, respectively.

Arizona↗