USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of the Air & Waste Management Association”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,689 records · Page 81Linked to original sources
USGS2025

Unlocking ecological insights from sub-seasonal visible-to-shortwave infrared imaging spectroscopy: The SHIFT campaign

We stand at the threshold of a transformative era in Earth observation, marked by space-borne visible-to-shortwave infrared (VSWIR) imaging spectrometers that promise consistent global observations of ecosystem function, phenology, and inter- and intra-annual change. However, the full value of repeat spectroscopy, the information embedded within different temporal scales, and the reliability of existing algorithms across diverse ecosystem types and vegetation phenophases have remained elusive due to the absence of suitable sub-seasonal spectroscopy data. In response, the Surface Biology and Geology (SBG) High-Frequency Time Series (SHIFT) campaign was initiated during late February 2022 in Santa Barbara County, California. SHIFT, designed to support NASA's SBG mission, addressed mission scoping, scientific advancement, applications development, and community building. This ambitious endeavor included weekly Airborne Visible InfraRed Imaging Spectrometer-Next Generation (AVIRIS-NG) imagery acquisitions for 13 weeks (spanning February 24 to May 29, 2022), accompanied by coordinated terrestrial vegetation and coastal aquatic data collection. We describe the rich datasets collected and illustrate how the complex sub-seasonal patterns of change can be linked to biological science and applications, surpassing insights from multispectral observations. Leveraging open-source processing methods and cloud-based analysis tools, the SHIFT campaign showcases the readiness of the scientific community to harness ecological insights from remotely sensed hyperspectral time series. We provide an overview of SHIFT's goals, data collections, preliminary results, and the collaborative efforts of early career scientists committed to unlocking the transformative potential of high-frequency time series data from space-borne VSWIR imaging spectrometers.

Ecosphere↗
USGS2025

Bayesian mapping of regionally grouped, sparse, univariate earth science data

Some earth science data are naturally grouped by region, and it is often desirable to map these data by region. However, if there are only a few samples within each region, then the map should be smoothed in an appropriate way to mitigate the problems that arise from having only a few samples. A smoothing algorithm based on a Bayesian hierarchical model is developed and presented in this report. This algorithm has several features that make it especially suitable for mapping earth science data: it can account for measurements that are censored, it can process multiple datasets with different measurement errors and different censoring thresholds, and it can calculate the uncertainty in any statistic that is mapped. The algorithm is demonstrated by mapping gold concentrations that are measured in streambed sediments in the Taylor Mountains quadrangle in southwestern Alaska.

Alaska↗
USGS2024

Prioritizing US Geological Survey science on salinization and salinity in candidate and selected priority river basins

The US Geological Survey (USGS) is selecting and prioritizing basins, known as Integrated Water Science basins, for monitoring and intensive study. Previous efforts to aid in this selection process include a scientifically defensible and quantitative assessment of basins facing human-caused water resource challenges (Van Metre et al. in Environmental Monitoring and Assessment , 192(7), 458 2020). In the present work, we explore this ranking process based on water quality considerations, specifically salinity and salinization. We selected top candidate basins to study salinity and salinization issues in 18 hydrologic regions that include 163 candidate basins. Our prioritization is based on quantitative assessment of sources of salinity, drivers of change, and receptors that must respond to those sources and drivers. Source terms represented in the prioritization include geology, depth to brackish groundwater, stream conductivity, chloride in precipitation, urban and agricultural land use, application of road salt as a deicer, and irrigation. Drivers represented in prioritization include changes in chemical weathering as a result of changes in rainwater chemistry. Receptors include measures of water stress, measurements of stream ecological health, and socioeconomic factors. In addition, we present research activities for the USGS on salinity and salinization that can be pursued in these basins including assessment of sources, pathways, and loadings; predicting and understanding changes in sources, peaks, and trends; understanding the components of salinity and mobilization of contaminants; understanding the relationship between salinization and changing ecosystems; and developing knowledge on the causes and distribution of groundwater salinity, brackish water resources, and challenges related to desalination.

Enviornmental Monitoring and Assessment↗
USGS2025

Induced earthquakes are generally not tidally triggered in Oklahoma and Kansas

Human-induced earthquakes occur along critically stressed faults as injected wastewater simultaneously heightens fluid pressure and pushes faults to failure. We investigate the possibility that small stresses imposed by Earth tides could trigger earthquakes in the induced seismicity region of Oklahoma and Kansas from 2011 to 2018. We decluster a catalog consisting of ∼110,000 earthquakes using three methods (Reasenberg, nearest-neighbor distance, and phase-bin). We find no significant tidal earthquake triggering using Schuster's p -value test for the declustered catalogs as a whole. We search for localized triggering using discretized space-time cells and find ∼0–6% of cells have significant tidal triggering which is close to what is randomly expected (5%) and indicates there is an insignificant amount of tidal triggering for the full study region. One area that has significant p -values across multiple time windows, ∼2014–2016 is ∼15 km from a region of large wastewater injection volume. It is possible that localized tidal triggering occurs for this time and area because faults remain critically stressed and are particularly susceptible to slip under the small stress load from the semidiurnal tide. Possible explanations for the lack of tidal triggering in our broader study are that the pre-seismic stressing rate in the earthquake nucleation area is faster than the tidal stressing rate (∼3 kPa/day), faults are not close enough to critically stressed to be affected by tidal forcing, and that nucleation occurs over longer periods than the tides considered in this study (∼1, ∼14 days). Fluid injection could be the source of a higher pre-seismic stress rate.

Kansas, Oklahoma↗
USGS2024

Uncertainty and spatial correlation in station measurements for mb magnitude estimation

The body‐wave magnitude (⁠⁠) is a long‐standing network‐averaged, amplitude‐based magnitude used to estimate the magnitude of seismic sources from teleseismic observations. The U.S. Geological Survey National Earthquake Information Center (NEIC) relies on in its global real‐time earthquake monitoring mission. Although waveform modeling‐based moment magnitudes are the modern standard to characterize earthquake size, is important because (1) in many cases, waveform modeling is not possible (e.g., low signal‐to‐noise events), (2) is applicable over a broad range of magnitudes, ∼M 4–7, and (3) there is a many decades‐long history of estimating magnitudes. We use the NEIC Preliminary Determination of Epicenters earthquake catalog to investigate the uncertainty in NEIC station measurements. We show that measurements are spatially correlated, which can bias event ⁠, and we describe an empirical relation between this spatial correlation and station‐to‐station distance. We further describe an approach to mitigate bias from the spatial correlation. Accounting for the spatial covariance of observations can change the event from −0.15 to 0.07 units (10th to 90th percentile) for smaller events (⁠⁠). These smaller events have the largest standard deviations ranging from 0.05 to 0.15 units (10th to 90th percentile).

The Seismic Record↗
USGS2026

Streamflow, water quality, and constituent loads and yields, Scituate Reservoir drainage area, Rhode Island, water year 2023

As part of a long-term cooperative program to monitor water quality within the Scituate Reservoir drainage area, the U.S. Geological Survey, in cooperation with Providence Water (formerly the Providence Water Supply Board), collected streamflow and water-quality data in tributaries to the Scituate Reservoir, Rhode Island. Streamflow and concentrations of chloride and sodium estimated from records of specific conductance for 16 tributaries were used to calculate loads of chloride and sodium during water year 2023 (October 1, 2022, through September 30, 2023). Water-quality samples were collected by Providence Water at 38 sampling stations on tributaries to the Scituate Reservoir during water year 2023. These water-quality data are summarized by using values of central tendency and are used, in combination with measured (or estimated) streamflows, to calculate loads and yields of selected water-quality constituents for water year 2023. Annual mean streamflows for monitoring stations in this study ranged from 0.47 to 34.4 cubic feet per second during water year 2023. At the 16 continuous-record streamgages, tributaries transported about 3,000 metric tons of chloride and 1,900 metric tons of sodium to the Scituate Reservoir; annual chloride yields for the tributaries ranged from 19 to 200 metric tons per square mile, and annual sodium yields ranged from 13 to 120 metric tons per square mile. At the stations where water-quality samples were collected by Providence Water, the medians of the median daily loads were 65,000 million colony forming units per day for coliform bacteria, 870 million colony forming units per day for Escherichia coli , 200 kilograms per day for chloride, 8.2 grams per day as nitrogen for nitrite, 520 grams per day as nitrogen for nitrate, and 300 grams per day as orthophosphate for phosphate. The medians of the median yields were 25,000 million colony forming units per day per square mile for coliform bacteria, 600 million colony forming units per day per square mile for Escherichia coli , 65 kilograms per day per square mile for chloride, 4.6 grams per day per square mile as nitrogen for nitrite, 180 grams per day per square mile as nitrogen for nitrate, and 180 grams per day per square mile as orthophosphate for phosphate.

Rhode Island↗
USGS2026

An entropic explanation for Gutenberg-Richter scaling

We develop a simple explanation for Gutenberg-Richter (G-R) size scaling of earthquakes on a single fault. We discretize the fault and consider all possible contiguous ruptures at that level of discretization. In this static model, we assume that slip scales with rupture length, and that the rupture rates at each point along the fault are consistent with an a priori long-term slip rate. These simple assumptions define an (under-determined) non-negative least-squares inverse problem. Each solution to this inverse problem is a set of earthquake rates that matches the slip-rate constraint. We use a Markov Chain Monte Carlo (MCMC) algorithm to uniformly sample the solution space assuming constant slip rates along the fault. At finer discretizations, deviations from G-R behavior decrease, which is consistent with an entropic pressure towards G-R solutions. When the fault is discretized into 10 or more segments, random solutions found by the MCMC algorithm have G-R size scaling, even though there are trivial solutions that, for example, have earthquakes of only one size. This is because there are simply far more solutions that have G-R scaling; as the problem size increases, the strong degeneracy of GR solutions results in other solutions becoming improbably rare. Also, the entropically favored G-R distribution has a b -value of approximately 1, which agrees with measured b -values in real earthquake catalogs.

JGR Solid Earth↗
USGS2025

Groundwater dominates snowmelt runoff and controls streamflow efficiency in the western United States

Climate change in seasonally snow-covered mountain catchments is reducing water supply and decreasing streamflow predictability. Here, we use tritium age dating to show that contrary to the common assumption that snowmelt quickly contributes to runoff, streamflow during snowmelt in western US catchments is dominated by older groundwater. The average age of streamwater during snowmelt runoff (5.7 ± 4.3 years) was intermediate to the average age of groundwater (10.4 ± 4.5 years) and recent precipitation, indicating that 58% (±34%) of snowmelt runoff was derived from groundwater. Water ages, streamflow, and groundwater storage were mediated by bedrock geology: low-permeability hard rock/shale catchments exhibited younger ages, less storage, and more efficient streamflow generation than high-permeability sandstone/clastic catchments. Our results demonstrate that snowmelt runoff is the result of multiple prior years of climate mediated by groundwater storage. Including these interactions will be crucial for predicting water resources as climate and landscape changes accelerate.

western united States↗
USGS2025

Unveiling coseismic deformation from differenced legacy aerial photography and modern lidar topography: The 1983 M6.9 Borah Peak earthquake, Idaho, USA

The 1983 M6.9 Borah Peak, Idaho, earthquake is one of the largest historical normal fault earthquakes in the western United States. We quantified meter-scale vertical change along the 35 km-long rupture using topographic differencing of 1966 aerial imagery and 2019 lidar-derived data. The initial differencing results are largely obscured by horizontal and vertical georeferencing errors and flight-line stripes. Our error corrections are designed to be insensitive to the coseismic deformation and reduced error by 50%. We calculated vertical separation and resolved a maximum of 2.02 ± 0.46 m at Doublespring Pass. Our vertical separation measurements are generally consistent with those from prior studies using field data and post-earthquake topographic data. However, the differencing measurements are a few decimeters lower than these prior measurements, indicating that differencing can isolate historical from prehistoric earthquake deformation. Our study demonstrates that revisiting historical earthquakes can provide new insights into the magnitude and patterns of coseismic deformation.

Idaho↗
USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗
USGS2025

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater↗
USGS1996

Pesticides in surface water from three agricultural basins in south-central Georgia, 1993-97

Twenty-two of 43 pesticides analyzed were detected in 128 water samples collected from the Tucsawhatchee Creek, the Little River, and the Withlacoochee River. These streams drain agricultural basins in south-central Georgia and were sampled from March 1993 through June 1995. Herbicides were detected more frequently than insecticides. The most frequently detected herbicides were atrazine and metolachlor and the most frequently detected insecticide was carbaryl. Pesticide concentrations in the three streams were low and did not exceed U.S. Environmental Protection Agency drinking water standards. The maximum pesticide concentration was 2.6 mg/L (micrograms per liter) for propargite, a miticide detected in only one sample. The maximum concentrations of the remaining 21 pesticides were less than 0.25 mg/L. The median concentrations were equal to the method detection limit for all pesticides except atrazine (0.008 mg/L) and metolachlor (0.012 mg/L). The ratio of herbicide detections to nondetections was largest in the planting season, smaller in the harvest season and smallest in the fallow season for the three basins. The same pattern existed for the insecticide ratios in the Little River and the Withlacoochee River. Pairwise correlations between concentrations of atrazine and metolachlor, and four parameters (discharge, and concentrations of dissolved organic carbon, suspended organic carbon, and suspended sediment) were evaluated for each stream. The strongest correlations existed between metolachlor and mean daily discharge, and metolachlor and sediment in the Withlacoochee River. The only significant correlation for the Little River was between atrazine and suspended sediment.

Georgia↗
USGS1998

Trace elements in streambed sediment and fish liver at selected sites in the Upper Colorado River Basin, Colorado 1995-96

Trace elements were analyzed in streambed-sediment samples collected from 16 sites and in fish-liver samples collected from 14 sites in the Upper Colorado River Basin in Colorado as part of the National Water-Quality Assessment program. Sites sampled represented agricultural, mining, mixed, and urban/recreation land uses and background conditions. The results for 15 trace elements in streambed-sediment and in fish-liver samples are presented in this report. Fourteen of the selected trace elements were detected in streambed-sediment samples collected at all sites. Twelve of the selected trace elements were detected in fish liver at more than 50 percent of the sites. Cadmium, copper, selenium, and zinc were selected for a more detailed analysis. Cadmium, copper, and zinc concentrations in streambed sediment were highest at mining land-use sites in the Southern Rocky Mountains physiographic province. Selenium concentrations in streambed sediment were highest at an agricultural land-use site in the Colorado Plateau physiographic province. The concentration of trace elements in streambed sediment generally increased as particle size decreased. Concentrations of trace elements in fish liver generally did not follow the same relation to land use as concentrations in streambed sediment; however, cadmium concentrations in fish liver were highest at a mining land-use site in the Southern Rocky Mountains physiographic province, and selenium concentrations in fish liver were highest at an agricultural land-use site in the Colorado Plateau physiographic province. Copper and zinc concentrations in fish liver were highest at mixed land-use sites. Comparison of streambed-sediment and fish-liver concentrations to two other similar NAWQA studies in the Rocky Mountain region generally indicated similar patterns in relation to land use for streambed sediment, but not for fish liver. Cadmium, copper, and zinc concentrations in streambed sediment were highest at sites affected by mining in all three study units. Selenium concentrations in streambed sediment did not indicate relations among the three study units when compared to land use. Cadmium in fish liver was highest at sites affected by mining in all three study units. Copper, selenium, and zinc in fish liver did not indicate relations among the three study units when compared to land use.

Colorado↗
USGS2024

Classification of lakebed geologic substrate in autonomously collected benthic imagery using machine learning

Mapping benthic habitats with bathymetric, acoustic, and spectral data requires georeferenced ground-truth information about habitat types and characteristics. New technologies like autonomous underwater vehicles (AUVs) collect tens of thousands of images per mission making image-based ground truthing particularly attractive. Two types of machine learning (ML) models, random forest (RF) and deep neural network (DNN), were tested to determine whether ML models could serve as an accurate substitute for manual classification of AUV images for substrate type interpretation. RF models were trained to predict substrate class as a function of texture, edge, and intensity metrics (i.e., features) calculated for each image. Models were tested using a manually classified image dataset with 9-, 6-, and 2-class schemes based on the Coastal and Marine Ecological Classification Standard (CMECS). Results suggest that both RF and DNN models achieve comparable accuracies, with the 9-class models being least accurate (~73–78%) and the 2-class models being the most accurate (~95–96%). However, the DNN models were more efficient to train and apply because they did not require feature estimation before training or classification. Integrating ML models into benthic habitat mapping process can improve our ability to efficiently and accurately ground-truth large areas of benthic habitat using AUV or similar images.

Michigan, Wisconsin↗
USGS2024

A methodology to estimate CO2 and energy gas storage resources in depleted conventional gas reservoirs

Depleted hydrocarbon reservoirs are subsurface geological structures capable of sequestering vast quantities of carbon dioxide (CO 2 ) as well as storing other energy gases for later usage, such as natural gas, and potentially hydrogen (H 2 ). Here we outline a methodology to quantify multi-gas storage resources in depleted conventional gas reservoirs for usage in assessments by the United States Geological Survey (USGS) at the scale of sedimentary basins. The methodology consists first of quantifying accessible pore volume in a depleted reservoir for natural gas storage using up to three equations. Input data are derived from commonly reported or estimated reservoir parameters and natural gas production volumes, and equations may be combined in linear models to improve pore volume estimates. Storage estimates from these equations are tested and validated for 31 reservoirs in the Michigan Basin Province, USA that were previously converted to underground gas storage facilities and have known (federally reported) natural gas storage capacities. Secondly, natural gas storage capacities can be transformed via fluid substitution calculations to estimate the storage resources for non-native fluids, applied here for, CO 2 , H 2 , and methane-H 2 blends, accounting for molecule-specific deviations from ideal gas behavior at reservoir pressures and temperatures as well as differing storage efficiencies. Importantly, the storage of non-native fluids may not be appropriate in all depleted gas reservoir settings due to potential risks like leakage, in particular in the case of H 2 storage, requiring additional knowledge of caprock sealing capacity. Given this caveat, we demonstrate the fluid substitution method for natural gas reservoirs of the Northern Niagaran Reef and Southern Niagaran Reef USGS plays in the Michigan Basin Province, as these trends of Silurian pinnacle reefs are capped with tight-sealing evaporite facies. The deterministic equations outlined from this methodology can be incorporated into future probabilistic USGS gas storage assessments for CO 2 , H 2 , and natural gas resources in the United States.

Michigan↗
USGS2025

A method to obtain remotely sensed grain size distributions from nonplanar granular deposits

Constraining the grain size distribution of granular deposits with complex surfaces is difficult with existing approaches. Field and laboratory techniques are time consuming and limited by the maximum grain size that laboratories can accommodate. In this study, we present a new method to identify the coarse fraction of the grain size distribution at a debris-flow fan deposit surveyed with terrestrial laser scanning (TLS) in Glenwood Canyon, Colorado, USA. This method is a novel grain segmentation algorithm developed for application to point cloud data of deposits with complex surfaces and angular grains ranging in size from centimeters to a meter. This approach combines an existing random forest machine learning method with a novel iterative clustering algorithm. We compared the grain size distribution from our algorithm with a Wolman pebble count conducted in the field, and found a root mean squared error of less than 2 cm from the 5th to 95th percentile of the grain size distribution of grains ranging from cobble to boulder sized (6.3–78 cm in our application). Finally, we compared our new algorithm with an existing open-source grain segregation algorithm, and our method outperformed the selected alternative when applied to the debris-flow deposit point cloud.

Colorado↗
USGS2025

Paleoseismology and paleogeodesy using coral microatolls

Establishing the rupture extent and slip distribution of individual paleo-earthquakes is vital for assessing fault behavior including the persistence of rupture segmentation, recurrence patterns, and similarity of successive events, key issues in both fault mechanics and hazard assessment. Techniques with high temporal and geodetic precision as well as a wide distribution of study sites are necessary to investigate past earthquakes in such detail. Coral microatoll growth is one of the best types of geologic record for paleoseismology and paleogeodesy given these needs, as it provides long, continuous, widely distributed records of centimeter-scale vertical tectonic motion with potentially annual-level temporal precision. This chapter describes the process of interpreting microatoll growth records to obtain time series of relative sea level, tectonic vertical deformation fields, and finally slip and coupling parameters on an underlying fault interface.

Book chapter↗
USGS2025

Fiber-optic sensing for earthquake hazards research, monitoring and early warning

The use of fiber‐optic sensing systems in seismology has exploded in the past decade. Despite an ever‐growing library of ground‐breaking studies, questions remain about the potential of fiber‐optic sensing technologies as tools for advancing if not revolutionizing earthquake‐hazards‐related research, monitoring, and early warning systems. A working group convened to explore these topics; we comprehensively examined the application of fiber optics in various aspects of earthquake hazards, encompassing earthquake source processes, crustal imaging, data archiving, and technological challenges. There is great potential for fiber‐optic systems to advance earthquake monitoring and understanding, but to fully unlock their capabilities requires continued progress in key areas of research and development, including instrument testing and validation, increased dynamic range for applications focused on larger earthquakes, and continued improvement in subsurface and source imaging methods. A key current stumbling block results from the lack of clear data archiving requirements, and we propose an initial strategy that balances data volume requirements with preserving key data for a broad range of future studies. In addition, we demonstrate the potential for fiber‐optic sensing to impact monitoring efforts by documenting the data completeness in a number of long‐term experiments. Finally, we outline the features of a instrument testing facility that would enable progress toward reliable and standardized distributed acoustic sensing data. Overcoming these current obstacles would facilitate progress in fiber‐optic sensing and unlock its potential application to a broad range of earthquake hazard problems.

California, Oregon, Washington↗