USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Atmospheres”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources
USGS2012

Ice sculpture in the Martian outflow channels

Many landforms in Martian outflow channels have characteristics that suggest sculpture by glaciers, ice streams, or ice sheets. Viking Orbiter and terrestrial satellite images were examined at similar resolution to compare features of the Martian outflow channels to features produced by the movement of ice on earth. Many resemblances were found. They include the anastomoses, sinuosities, and U‐shaped cross profiles of valleys; hanging valleys; and linear scour marks on valley walls, grooves and ridges on valley floors, and streamlining of bedrock highs. The question of whether ice could have moved in the Martian environment is investigated. Since gradients on Martian channel floors are extremely low or even reversed, a certain thickness of ice is required to initiate glacial motion. If ice filled the Martian channels to the level of interior plateaus, flow could have occurred, even under present climatic conditions, although warmer climates in the past would have been more favorable. Additionally, if the channel fluids were brines, ice might have been wet based and would have moved readily by slipping over the ground. It is envisioned that springs or small catastrophic outbursts discharged fluids from structural outlets or chaotic terrains. The fluids built icings that may have grown into substantial masses and eventually flowed like glaciers down preexisting valleys. Alternatively, the fluids may have formed rivers or floods that formed ice jams and consolidated into icy masses in places where obstacles blocked their flow. These masses of ice or slush were probably episodic and temporary, but where they occurred within the channels, they may have produced landforms that are characteristic of glacial sculpture on earth.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

A teleseismic analysis of the New Brunswick earthquake of January 9, 1982

The analysis of the New Brunswick earthquake of January 9, 1982, has important implications for the evaluation of seismic hazards in eastern North America. Although moderate in size ( m b 5.7), it was well-recorded teleseismically. Source characteristics of this earthquake have been determined from analysis of data that were digitally recorded by the Global Digital Seismograph Network. From broadband displacement and velocity records of P waves, we have obtained a dynamic description of the rupture process as well as conventional static properties of the source. The depth of the hypocenter is estimated to be 9 km from depth phases. The focal mechanism determined from the broadband data corresponds to predominantly thrust faulting. From the variation in the waveforms the direction of slip is inferred to be updip on a west dipping NNE striking fault plane. The steep dip of the inferred fault plane suggests that the earthquake occurred on a preexisting fault that was at one time a normal fault. From an inversion of bodywave pulse durations, the estimated rupture length is 5.5 km. Average properties of the rupture process were examined by a moment tensor analysis of long-period P and SH body waves. The long-period moment of this earthquake was 5.3 × 10 24 dyne cm. The static and dynamic stress drops are 41 and 65 bars, respectively, similar to those of many earthquakes with similar moment in regions that are more seismically active. The joint epicenter determination algorithm was used to locate, relative to the mainshock, the three teleseismically recorded aftershocks that occurred through March 31, 1982. The relocated hypocenters of the aftershocks are significantly different from each other and from that of the mainshock; they provide additional support for the source dimensions inferred from the waveform analysis.

Journal of Geophysical Research Solid Earth↗
USGS2012

Statistical averaging of marine magnetic anomalies and the aging of oceanic crust

Visual comparison of Mesozoic and Cenozoic magnetic anomalies in the North Pacific suggests that older anomalies contain less short-wavelength information than younger anomalies in this area. To test this observation, magnetic profiles from the North Pacific are examined from crust of three ages: 0–2.1, 29.3–33.1, and 64.9–70.3 m.y, B.P. For each time period, at least nine profiles were analyzed by (1) calculating the power density spectrum of each profile, (2) averaging the spectra together, and (3) computing a ‘recording filter’ for each time period by assuming a hypothetical seafloor model. The model assumes that the top of the source is acoustic basement, the source thickness is 0.5 km, and the time scale of geomagnetic reversals is according to Ness et al. (1980). The calculated power density spectra of the three recording filters are complex in shape but show an increase of attenuation of short-wavelength information as the crust ages. These results are interpreted using a multilayer model for marine magnetic anomalies in which the upper layer, corresponding to pillow basalt of seismic layer 2A, acts as a source of noise to the magnetic anomalies. As the ocean crust ages, this noisy contribution by the pillow basalts becomes less significant to the anomalies. Consequently, magnetic sources below layer 2A must be faithful recorders of geomagnetic reversals.

Journal of Geophysical Research Solid Earth↗
USGS2012

In situ studies of velocity in fractured crystalline rocks

A study of the effects of macroscopic fractures on P and S wave velocities has been conducted in four wells drilled in granitic rock to depths between 0.6 and 1.2 km. The effect of macroscopic fractures is to decrease both V p and V s and increase V p / V s . In wells with a relatively low density of macroscopic fractures, the in situ velocity is similar to that of saturated core samples under confining pressure in the laboratory, and there is a clear correlation between zones with macroscopic fractures and anomalously low velocities. In wells with numerous macroscopic fractures, the in situ velocity is lower than that of intact samples under pressure, and there is a correlation between the rate at which in situ velocity increases with depth and the rate at which the velocity of laboratory samples increases with pressure. Differences in in situ P wave velocity between wells cannot be explained solely by differences in the degree of macroscopic fracturing, thus emphasizing the importance of composition and microcracks on velocity. In one highly fractured well the in situ P wave velocity is essentially the same for frequencies ranging from 10 Hz to 20 kHz; this suggests that the macrofractures affect velocity similarly over a broad frequency range. Chemical alteration of rock adjacent to macroscopic fractures appears to play an important role in reducing in situ velocities. Synthetic reflection seismograms generated from the velocity logs suggest that fracture zones are one possible source of deep-crustal reflectors observed on seismic reflection profiles.

Journal of Geophysical Research Solid Earth↗
USGS2012

Investigation of internal friction in fused quartz, steel, Plexiglass, and Westerly granite from 0.01 to 1.00 Hertz at 10-8 to 10-7 strain amplitude

A detailed evaluation on the method of internal friction measurement by the stress-strain hysteresis loop method from 0.01 to 1 Hz at 10 −8 to 10 −7 strain amplitude and 23.9°C is presented. Significant systematic errors in relative phase measurement can result from convex end surfaces of the sample and stress sensor and from end surface irregularities such as nicks and asperities. Preparation of concave end surfaces polished to optical smoothness having a radius of curvature >3.6×10 4 cm reduces the systematic error in relative phase measurements to <(5.5±2.2)×10 −4 radians. The values of Q E −1 (internal friction under uniaxial compression) determined from the relative phase measurements are | Q E −1 – Q s −1 |< 2.8×10 −3 for the tool steel sample and | Q E −1 – Q s −1 |< 2.2×10 −3 for the Westerly granite sample, where Q s −1 is the internal friction of the fused quartz stress sensor under uniaxial compression. These values are consistent with those inferred from the relative modulus dispersion data also presented in this paper. The polymethyl methacrylate (PMM, trade name Plexiglass) sample shows high values of internal friction ( Q E −1 ≅5×10 −2 ) with strong frequency dependence and with a maximum in Q E −1 at ≅0.4 Hz.

Journal of Geophysical Research Solid Earth↗
USGS2012

Wandering terranes in southern Alaska: The Aleutia Microplate and implications for the Bering Sea

Paleomagnetic and geological data suggest that much of southern Alaska is a collage of tectonostratigraphic terranes which originated in Mesozoic time at paleolatitudes far south of their present position. The time of ‘docking’ of the terranes against cratonic Alaska is critical to defining their amalgamated size and extent during their northward motion as well as their role in the evolution of the Bering Sea. One of the largest of the tectonostratigraphic terranes, the Peninsular terrane of south central and southwestern Alaska, extends offshore along the outer Bering Sea continental margin (Beringia). Paleomagnetic data suggest that this terrane has moved northward through all of Cenozoic time, but geologic data imply that the terrane had accreted to Alaska by the end of the Mesozoic. In early Cenozoic time the eastern part of the Aleutian arc appears to have been superimposed on the Peninsular terrane, and postulated northward Cenozoic motion of the terrane would therefore have required northward motion of the arc. Two accretion models, based on docking times for terranes in Alaska, are proposed, and they illustrate that large areas of the abyssal Bering Sea, the Alaska Peninsula, the Aleutian arc, and the Beringian continental margin may be part of a superterrane or microplate called Aleutia (microplate as defined by Beck et al. (1980), i.e., a microplate is a displaced segment of lithosphere that has crustal roots, whereas a superterrane is an amalgamation of terranes which may or may not be rootless). Model A implies that the Aleutian arc developed in situ on the southern edge of Aleutia after the microplate had docked. In model B, the final docking time of the Peninsular terrane is late Cenozoic, which implies that the Aleutia microplate encompasses a mammoth area that includes parts of southern Alaska, the Alaska Peninsula, the southern Beringian margin, the abyssal Bering Sea (Kula plate), and the Aleutian arc. If model A is correct, the docking time of the Peninsular terrane is late Mesozoic or earliest Tertiary. The Aleutia microplate in this model is made up solely of the abyssal Bering Sea (Kula plate), which presumably docked at the same time or slightly after the Peninsular terrane accreted against Alaska. If model B is correct, that is, if the Aleutia collided with nuclear Alaska during the Cenozoic, then a late Cenozoic suture zone, the vestige of a large open sea that must have closed between Aleutia and Alaska, must exist in south central and southwest Alaska. Either evidence for Cenozoic closure and suturing has been obliterated in Alaska or the inferences of Cenozoic terrane motion derived from paleomagnetic data are suspect.

Alaska↗
USGS2012

A dislocation model of strain accumulation and release at a subduction zone

Strain accumulation and release at a subduction zone are attributed to stick slip on the main thrust zone and steady aseismic slip on the remainder of the plate interface. This process can be described as a superposition of steady state subduction and a repetitive cycle of slip on the main thrust zone, consisting of steady normal slip at the plate convergence rate plus occasional thrust events that recover the accumulated normal slip. Because steady state subduction does not contribute to the deformation at the free surface, deformation observed there is completely equivalent to that produced by the slip cycle alone. The response to that slip is simply the response of a particular earth model to embedded dislocations. For a purely elastic earth model, the deformation cycle consists of a coseismic offset followed by a linear‐in‐time recovery to the initial value during the interval between earthquakes. For an elastic‐viscoelastic earth model (elastic lithosphere over a viscoelastic asthenosphere), the postearthquake recovery is not linear in time. Records of local uplift as a function of time indicate that the long‐term postseismic recovery is approximately linear, suggesting that elastic earth models are adequate to describe the deformation cycle. However, the deformation predicted for a simple elastic half‐space earth model does not reproduce the deformation observed along the subduction zones in Japan at all well if stick slip is restricted to the main thrust zone. As recognized earlier by Shimazaki, Seno, and Kato, the uplift profiles could be explained if stick slip were postulated to extend along the plate interface beyond the main thrust zone to a depth of perhaps 100 km, but independent evidence suggests that stick slip at such depths is unlikely.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Crustal and upper mantle structure of the northern and central Sierra Nevada

Teleseismic data were recorded within the Sierra Nevada to look for lateral variations in the upper mantle. The data were collected at both temporary and permanent stations, and P wave residuals were computed. After correcting the P residual data for crustal and topographic effects, there is still a variation of as much as 0.5-0.6 s from the north end of the Sierra Nevada to Mono Lake, located east of the central part of the range. In addition, there are significant variations in travel time patterns, depending on the azimuth of wave arrivals. Two simple modeling approaches have been used to infer the upper mantle velocity structure from the observed variations in travel time. In the first, it is assumed that the velocity variations are distributed throughout a depth range of about 60–160 km. One model that fits the data indicates a north-to-south trend in upper mantle P velocities from about 7.9 km/s at the north end of the Sierra to 7.6 km/s near Mono Lake. Superimposed is a west-to-east trend from 7.85 km/s under the Sierra Nevada crest to 7.7 km/s east of Lake Tahoe. In the second modeling approach, a fixed velocity contrast is assumed between the lithosphere and asthenosphere with variations in travel time resulting from variations in lithospheric thickness. One model, consistent with the observations, indicates a thinning of the lithosphere from 110 km at the north end of the Sierra to 60 km near Mono Lake.

Journal of Geophysical Research Solid Earth↗
USGS2012

Nonlinear strain buildup and the earthquake cycle on the San Andreas fault

Two contrasting models of the earthquake deformation cycle on strike slip faults predict significant temporal declines in shear strain rate near the fault, accompanied by a progressive broadening of the zone of deformation adjacent to it. In the thin lithosphere model, transient deformation results from flow in the asthenosphere due to stress relaxation following faulting through most or all of the lithosphere. For an earth model with a thick elastic lithosphere (plate thickness » depth of seismic slip), transient motions are due to postearthquake aseisrnic slip below the coseismic fault plane. Data from the San Andreas fault indicate a long-term temporal decrease in strain rate that persists for at least 30 years and may extend through the entire earthquake cycle. Observations support a cycle-long rate decrease and a temporal spreading of the deformation profile only if movement cycles on the northern and southern locked sections of the fault are basically similar. If so, the usually lower strain rates and broader deformation zone currently observed on the southern San Andreas represent a later evolutionary stage of the northern locked section, where a great earthquake is a more recent occurrence. Although the data allow some extreme models to be discarded, no sufficiently strong constraints exist to decide between the thin and thick lithosphere models. Regardless of the appropriate model the geodetic observations themselves indicate that strain buildup is sufficiently nonlinear to cause significant departures from recurrence estimates based on linear strain accumulation and the time-predictable model.

Journal of Geophysical Research Solid Earth↗
USGS2012

The use of MAGSAT data to determine secular variation

A combined spatial and secular variation model of the geomagnetic field, labeled M061581, is derived from a selection of Magsat data. Secular variation (SV) data computed from linear fits to midnight hourly values from 19 magnetic observatories were also included in the analysis but were seen to have little effect on the model. The SV patterns from this new model are compared with those from the 1980 IGRF and with those for 1970 computed by the DGRF and with the 1960 patterns computed using the GSFC(12/66) model. Most of the features of the M061581 are identical in location and level with those of the 1980 IGRF. Together they confirm that the reversals in sign of field change seen over Asia and North America between 1965 and 1975 are reverting to the pre-1965 states. The M061581 model gives −32 nT/yr for the dipole decay rate, larger than the 70% increase already reported since 1965. This abnormally high value is interpreted as being a defect of the model because it appears to result from a much larger (−100 nT/yr) drop in field over the polar regions not indicated by the 1980 IGRF. This north polar decrease is shown to be of external origin as the result of a combination of the seasonal effect of the north polar ionospheric (counterclockwise) afternoon Sq p cell increasing in intensity from the beginning (November 1979) to the end (June 1980) of the Magsat data collection period, coupled with an enhancement of its effect as the orbit lowered from the 350– 550 km initial altitudes to near 200 km just prior to burnup. This experiment indicates that secular variation can be obtained from satellite data for intervals of less than a full year if corrections can be made for seasonal effects and that ‘annual snapshots’ of the field by a satellite would allow easy and accurate models of secular change without the use of any surface data.

Journal of Geophysical Research Solid Earth↗
USGS2012

The 1979 Homestead Valley earthquake sequence, California: Control of aftershocks and postseismic deformation

The coseismic slip and geometry of the March 15, 1979, Homestead Valley, California, earthquake sequence are well constrained by precise horizontal and vertical geodetic observations and by data from a dense local seismic network. These observations indicate 0.52±0.10 m of right-lateral slip and 0.17±0.04 m of reverse slip on a buried vertical 6-km-long and 5-km-deep fault and yield a mean static stress drop of 7.2±1.3 MPa. The largest shock had M S = 5.6. Observations of the ground rupture revealed up to 0.1 m of right-lateral slip on two mapped faults that are subparallel to the modeled seismic slip plane. In the 1.9 years since the earthquakes, geodetic network displacements indicate that an additional 60±10 mm of postseismic creep took place. The rate of postseismic shear strain (0.53±0.13 μrad/yr) measured within a 30×30-km network centered on the principal events was anomalously high compared to its preearthquake value and the postseismic rate in the adjacent network. This transient cannot be explained by postseismic slip on the seismic fault but rather indicates that broadscale release of strain followed the earthquake sequence. We have calculated the postearthquake stress field caused by the modeled coseismic slip. We assume that failure is promoted when the sum of the shear stress plus 0.75 times the faultopening stress increases. Most aftershocks concentrate at points where the stresses are enhanced by 0.3 MPa (3 bars) or more; aftershocks are nearly absent where postearthquake stresses decrease by 0.3–0.5 MPa. Isolated off-fault clusters of aftershocks that locate at one fault length from the rupture plane are explainable by this hypothesis. We find that ground rupture and postseismic creep take place where near-surface stresses are calculated to increase within the preexisting fault zones. Two patches that extend 4 km from both ends of the seismic fault exhibited neither aftershocks nor measurable postseismic creep. The sensitivity of aftershocks and ground rupture to changes in stress that are less than 5% of the earthquake stress drop demonstrates that the region around the earthquakes was within a few percent of its failure threshold before the main shocks. The preearthquake stress field and the stress required for failure must also have been nearly uniform.

Journal of Geophysical Research Solid Earth↗
USGS2012

Earthquakes in the Orozco transform zone: seismicity, source mechanisms, and tectonics

As part of the Rivera Ocean Seismic Experiment, a network of ocean bottom seismometers and hydrophones was deployed in order to determine the seismic characteristics of the Orozco transform fault in the central eastern Pacific. We present hypocentral locations and source mechanisms for 70 earthquakes recorded by this network. All epicenters are within the transform region of the Orozco Fracture Zone and clearly delineate the active plate boundary. About half of the epicenters define a narrow line of activity parallel to the spreading direction and situated along a deep topographic trough that forms the northern boundary of the transform zone (region 1). Most focal depths for these events are very shallow, within 4 km of the seafloor; several well-determined focal depths, however, are as great as 7 km. No shallowing of seismic activity is observed as the rise-transform intersection is approached; to the contrary, the deepest events are within 10 km of the intersection. First motion polarities for most of the earthquakes in region 1 are compatible with right-lateral strike slip faulting along a nearly vertical plane, striking parallel to the spreading direction. Another zone of activity is observed in the central part of the transform (region 2). The apparent horizontal and vertical distribution of activity in this region is more scattered than in the first, and the first motion radiation patterns of these events do not appear to be compatible with any known fault mechanism. Pronounced lateral variations in crustal velocity structure are indicated for the transform region from refraction data and measurements of wave propagation directions. The effect of this lateral heterogeneity on hypocenters and fault plane solutions is evaluated by tracing rays through a three-dimensional velocity grid. While findings for events in region 1 are not significantly affected, in region 2, epicentral mislocations of up to 10 km and azimuthal deflections of up to 45&deg; may result from assuming a laterally homogeneous velocity structure. When corrected for the effects of lateral heterogeneity, the epicenters and fault plane solutions for earthquakes in region 2 are compatible with predominantly normal faulting along a topographic trough trending NW&ndash;SE; the focal depths, however, are poorly constrained. These results suggest an en echelon spreading center or leaky transform regime in the central transform region.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Precision of geodolite surveys: A reply to Jackson and Cheng

Jackson and Cheng have suggested that the changes in areal dilatation measured in Geodolite surveys by the U.S. Geological Survey may be simply an artifact of the measuring system. Although systematic error could conceivably account for the observed excursions in dilatation, we maintain that the specific criticisms by Jackson and Cheng are incorrect: the excursions in dilatation cannot be attributed to the offset correction nor to proportional error associated with temperature. The absence of both errors is demonstrated by using data that are particularly sensitive to the two effects.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Experimental deformation of polycrystalline H2O ice at high pressure and low temperature: Preliminary results

Interest in the mechanical properties of water ice under the conditions in which it exists in the outer solar system has motivated the development and use of a new high‐pressure, low‐temperature triaxial deformation apparatus. Constant displacement rate tests on 70 samples of pure polycrystalline water ice have been performed at temperatures 77≤≤258 K, confining pressures 0.1≤≤350 MPa, and strain rates 3.5×10≤ ≤3.5×10 s. In most cases, the ice polymorph tested was ice . Both brittle and ductile behavior have been observed. Brittle behavior of ice, promoted by lower pressure, lower temperature, and higher strain rate, is analogous to that in rocks, with the important exception that brittle fracture strength becomes independent of confining pressure above 50 MPa pressure and the fracture angle is approximately 45° to the loading direction (i.e., the coefficient of internal friction is approximately zero). Ductile flow, the predominant behavior in our tests at ≥195 K, follows a law of form = σ exp (−*/) (σ is stress; is the gas constant; , * are material constants). Three sets of material constants are required to fit the data, with changes in sets (or mechanisms) occurring near 243 K and 195 K. The value of remains near 4 throughout the measured ductile field, but * drops from 91 to 61 to 31 /mole as temperature decreases. The maximum brittle strength measured was 171 MPa; the maximum ductile strength measured was 91 MPa. At confining pressures near the phase transition pressure of ice → ice II, the ductile strength is observed to drop dramatically. Some overlap with previous work occurs at higher temperatures and lower pressures. Agreement with present work is generally good, both quantitatively in the values of and *, and qualitatively in the mechanism of deformation. Although the ductile strengths measured here are somewhat higher than expected on the basis of extrapolations of previous work, the low value of * at <195 K indicates that the ice layer on icy bodies in the solar system is much weaker than has generally been predicted.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Chryse Basin channels: low-gradients and ponded flows.

Gradients on the floors of the Martian outflow channels that are derived from radar-elevation profiles across Lunae Planum and Chryse Basin have much lower values than those obtained from the U.S. Geological Survey's topographic map. Whereas the gradients of Maja and Ares Valles are similar to those of the catastrophic flood channels in the Scablands of Washington State, the gradients of Simud and Tiu Valles are essentially level, and the movement of fluids to the N poses problems. It is proposed that ponding may have formed lakes in depressions associated with the Valles Marineris grabens, ancient craters in the chaotic terrain area, and possibly even the regional low where most chaotic terrains occur. It is envisaged that lakes eventually overflowed, forming the present channels. When dams broke, floods were released catastrophically, with a final gigantic flood from the Valles Marineris system of troughs, which would have had sufficient head to move fluids across nearly level gradients through the Simud and Tiu channels.

Journal of Geophysical Research↗
USGS2012

Petrology and comparative thermal and mechanical histories of clasts in breccia 62236

Lunar breccia 62236 contains large lithic fragments of troctolite, norite, and anorthosite. The mafic phases, olivine, inverted pigeonite, and augite, fill interstitial areas between larger plagioclases and appear to be cumulate phases with extensive adcumulus growth. Pyroxene compositional homogeneity indicates that cation exchange during cooling was limited to an area of about 1 mm. Primary augite and pigeonite both contain 30 μm-wide lamellae of the other along ‘001’. Pigeonite inverted to orthopyroxene without retaining any crystallographic orientation and subsequently exsolved fine lamellae of augite on (100). Profiles across orthopyroxene-augite interfaces obtained in the analytical transmission electron microscope show an increase of ∼5% wollastonite in augite within 0.5 μm of the interface, suggesting that short-range cation exchange continued to temperatures below 500°C. The entire sample has undergone heterogeneous shock deformation. Shock melting of the troctolitic clast suggests pressures of 200–300 kb and well-developed basal twinning in augite from the norite clasts suggests pressures of 50–300 kbars. The present evidence indicates that 62236 contains parts of a slowly cooled microlayered adcumulate that has been heterogeneously shocked several times and combined into the present breccia.

Journal of Geophysical Research Solid Earth↗
USGS2012

Strangways Crater, Northern Territory, Australia: Siderophile element enrichment and lithophile element fractionation

The Strangways Crater, Northern Territory, Australia (15°12′S, 133°35′ E ), has a central core, about 10 km in diameter, of shocked granitic gneiss and amphibolite, and some remnants of a melt rock sheet, surrounded by outer rings of quartzite and siltstone to a diameter of 20–25 km. Seven samples of melt rock (six granitic melts, one shale melt clast) and four samples of country rock (granitic gneiss, amphibolite, shale, quartzite) were analyzed by neutron-activation analysis: for Sc, Cr, Fe, Co, Zn, Rb, Zr, Sb, Cs, Ba, rare earth elements, Hf, Ta, Th, and U, the samples were analyzed instrumentally; and for Ni, Se, Pd, Ag, Cd, Re, Os, Ir, and Au, they were analyzed radiochemically. Siderophile elements are significantly enriched in the granitic melt rocks relative to country rocks; for example, the Ir enrichments range from 0.6 to 2.8 ppb. The low Ir/Ni ratio (∼0.16 relative to C1 chondrites) excludes a chondritic impacting body, and Cr enrichment argues against impact by an iron meteorite. The Strangways Crater may have been formed by the impact of an olivine-rich achondrite and melt rocks appear to contain about 3 wt.% of projectile material. The composition of the granitic melt rocks cannot be reproduced by any simple mixture of analyzed country rock types and chemical fractionation by selective shock melting appears to have taken place.

Journal of Geophysical Research Solid Earth↗
USGS2012

Small-scale features in the Earth's magnetic field observed by Magsat

A spherical harmonic expansion to degree and order 29 is derived using a selected magnetically quiet sample of Magsat data. Global maps representing the contribution due to terms of the expansion above n = 13 at 400 km altitude are compared with previously published residual anomaly maps and shown to be similar, even in polar regions. An expansion with such a high degree and order displays all but the sharpest features seen by the satellite and gives a more consistent picture of the high-order field structure at a constant altitude than do component maps derived independently.

Journal of Geophysical Research Solid Earth↗