USGS Science⌕ Search

SEARCH · USGS Science

Results for “World & I”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

Reference samples for the earth sciences

A revised list of reference samples of interest to geoscientists has been extended to include samples for the agronomist, the archaeologist and the environmentalist. In addition to the source from which standard samples may be obtained, references or pertinent notes for some samples are included. The number of rock reference samples is now almost adequate, and the variety of ore samples will soon be sufficient. There are very few samples for microprobe work. Oil shales will become more important because of the outlook for world petroleum resources. The dryland equivalent of a submarine basalt might be useful in studies of sea-floor spreading and of the geochemistry of basalts. The Na- and K-feldspars of BCS (British Chemical Standards—Bureau of Analysed Samples), NBS (National Bureau of Standards), and ANRT (Association Kationale de la Recherche Technique) could serve as trace-element standards if such data were available. Similarly, the present NBS flint and plastic clays, as well as their predecessors, might be useful for archaeological pottery studies. The International Decade for Ocean Exploration may stimulate the preparation of ocean-water standards for trace elements or pollutants and a standard for manganese nodules.

Geochimica et Cosmochimica Acta↗

Interstitial solutions and diagenesis in deeply buried marine sediments: Results from the Deep Sea Drilling Project

Through the Deep Sea Drilling Project samples of interstitial solutions of deeply buried marine sediments throughout the World Ocean have been obtained and analyzed. The studies have shown that in all but the most slowly deposited sediments pore fluids exhibit changes in composition upon burial. These changes can be grouped into a few consistent patterns that facilitate identification of the diagenetic reactions occurring in the sediments. Pelagic clays and slowly deposited (<1 cm/10 3 yr) biogenic sediments are the only types that exhibit little evidence of reaction in the pore waters. In most biogenic sediments sea water undergoes considerable alteration. In sediments deposited at rates up to a few cm/10 3 yr the changes chiefly involve gains of Ca 2+ and Sr 2+ and losses of Mg 2+ which balance the Ca 2+ enrichment. The Ca-Mg substitution may often reach 30 mM/kg while Sr 2+ may be enriched 15-fold over sea water. These changes reflect recrystallization of biogenic calcite and the substitution of Mg 2+ for Ca 2+ during this reaction. The Ca-Mg-carbonate formed is most likely a dolomitic phase. A related but more complex pattern is found in carbonate sediments deposited at somewhat greater rates. Ca 2+ and Sr 2+ enrichment is again characteristic, but Mg 2+ losses exceed Ca 2+ gains with the excess being balanced by SO 4 post staggered2- losses. The data indicate that the reactions are similar to those noted above, except that the Ca 2+ released is not kept in solution but is precipitated by the HCO 3 post staggered- produced in SO 4 post staggered2- reduction. In both these types of pore waters Na + is usually conservative, but K + depletions are frequent. In several partly consolidated sediment sections approaching igneous basement contact, very marked interstitial calcium enrichment has been found (to 5.5 g/kg). These phenomena are marked by pronounced depletion in Na + , Si and CO 2 , and slight enhancement in Cl - . The changes are attributed to exchange of Na + for Ca 2+ in silicate minerals forming from submarine weathering of igneous rocks such as basalts. Water is also consumed in these reactions, accounting for minor increases in total interstitial salinity. Terrigenous, organic-rich sediments deposited rapidly along continental margins also exhibit significant evidences of alteration. Microbial reactions involving organic matter lead to complete removal of SO 4 post staggered2- , strong HCO 3 post staggered- enrichment, formation of NH 4 post staggered+ , and methane synthesis from H 2 and CO 2 once SO 4 post staggered2- is eliminated. K + and often Na + (slightly) are depleted in the interstitial waters. Ca 2+ depletion may occur owing to precipitation of CaCO 3 . In most cases interstitial Cl - remains relatively constant, but increases are noted over evaporitic strata, and decreases in interstitial Cl - are observed in some sediments adjacent to continents.

Geochimica et Cosmochimica Acta↗

Deep-sea spherules from Pacific clay: Mass distribution and influx rate

From 411 kg of Pacific clay, 22 mg of stony spherules and 50 mg of iron spherules larger than 150 μm were concentrated. The extraterrestrial origin of these particles was evaluated with the aid of both optical and electron microscopy as well as atomic absorption elemental analysis. The integral number ( N ) of stony particles from this sediment in the mass (M) range 20–300 μg is given by N ( > M ( g )) = 5.13 × 10 −6 × M −1.65 . The world-wide influx rate of stony particles in the mass range which survive atmospheric heating and ocean sediment storage is calculated to be 90 tons/yr. The relative contributions of ablation debris vs fused interplanetary dust to the influx of stony spherules is discussed, but as yet the question remains unanswered.

Geochimica et Cosmochimica Acta↗

A precise 232Th-208Pb chronology of fine-grained monazite: Age of the Bayan Obo REE-Fe-Nb ore deposit, China

We have obtained precise Th-Pb internal isochron ages on monazite and bastnaesite for the world's largest known rare earth elements (REE)-Fe-Nb ore deposit, the Bayan Obo of Inner Mongolia, China. The monazite samples, collected from the carbonate-hosted ore zone, contain extremely small amounts of uranium (less than 10 ppm) but up to 0.7% ThO 2 . Previous estimates of the age of mineralization ranged from 1.8 to 0.255 Ga. Magnetic fractions of monazite and bastnaesite samples (<60-μm size) showed large ranges in 232 Th 204 Pb "> 232 Th 204 Pb values (900–400,000) and provided precise Th-Pb internal isochron ages for paragenetic monazite mineralization ranging from 555 to 398 Ma within a few percent error (0.8% for two samples). These results are the first indication that REE mineralization within the giant Bayan Obo ore deposit occurred over a long period of time. The initial lead isotopic compositions (low 206 Pb 204 Pb "> 206 Pb 204 Pb and high 208 Pb 204 Pb) "> 208 Pb 204 Pb) and large negative ϵ Nd values for Bayan Obo ore minerals indicate that the main source(s) for the ores was the lower crust which was depleted in uranium, but enriched in thorium and light rare earth elements for a long period of time. Zircon from a quartz monzonite, located 50 km south of the ore complex and thought to be related to Caledonian subduction, gave an age of 451 Ma, within the range of monazite ages. Textural relations together with the mineral ages favor an epigenetic rather than a syngenetic origin for the orebodies. REE mineralization started around 555 Ma (disseminated monazite in the West, the Main, and south of the East Orebody), but the main mineralization (banded ores) was related to the Caledonian subduction event ca. 474-400 Ma.

Bayan Obo, Kuanggou Fault↗

Karst hydrology: A review

Karst regions of the world are characterized by limestones and other soluble rocks at or near land surface that have been modified by solutional erosion. Such surface features as sinks, long dry valleys, sparse streams, and bare rock and such subsurface features as caverns, arterial solution openings leading to large springs, and a deep water table are typical of karst terranes. These features result in an uneven distribution of permeability in karst systems and surface and subsurface hydrologic conditions that require special hydrogeologic studies. Local high permeability at shallow depth in mature karst regions leads to an ecology associated with a soilless and water-scarce surface environment. Many practical problems result from this high permeability, including: (1) scarcity and poor predictability of groundwater supplies; (2) scarcity of surface-water supplies; (3) instability of the ground; (4) leakage of surface reservoirs; and (5) an unreliable waste-disposal environment. Interest in karst hydrology has increased greatly in the past decade; this interest has resulted in the international exchange of numerous published reports on local areas and on special topical karst problems. Many of these reports have been used by the authors in preparing this paper, which synthesizes results of many workers and focuses attention on: (1) the development of karst features through hydrologic processes; and (2) hydrologic systems of karst terranes.

Journal of Hydrology↗

Theory and application of an approximate model of saltwater upconing in aquifers

Motion and mixing of salt water and fresh water are vitally important for water-resource development throughout the world. An approximate model of saltwater upconing in aquifers is developed, which results in three non-linear coupled equations for the freshwater zone, the saltwater zone, and the transition zone. The description of the transition zone uses the concept of a boundary layer. This model invokes some assumptions to give a reasonably tractable model, considerably better than the sharp interface approximation but considerably simpler than a fully three-dimensional model with variable density. We assume the validity of the Dupuit-Forchheimer approximation of horizontal flow in each layer. Vertical hydrodynamic dispersion into the base of the transition zone is assumed and concentration of the saltwater zone is assumed constant. Solute in the transition zone is assumed to be moved by advection only. Velocity and concentration are allowed to vary vertically in the transition zone by using shape functions. Several numerical techniques can be used to solve the model equations, and simple analytical solutions can be useful in validating the numerical solution procedures. We find that the model equations can be solved with adequate accuracy using the procedures presented. The approximate model is applied to the Smoky Hill River valley in central Kansas. This model can reproduce earlier sharp interface results as well as evaluate the importance of hydrodynamic dispersion for feeding salt water to the river. We use a wide range of dispersivity values and find that unstable upconing always occurs. Therefore, in this case, hydrodynamic dispersion is not the only mechanism feeding salt water to the river. Calculations imply that unstable upconing and hydrodynamic dispersion could be equally important in transporting salt water. For example, if groundwater flux to the Smoky Hill River were only about 40% of its expected value, stable upconing could exist where hydrodynamic dispersion into a transition zone is the primary mechanism for moving salt water to the river. The current model could be useful in situations involving dense saltwater layers.

Journal of Hydrology↗

Analytical solutions to non-Fickian subsurface dispersion in uniform groundwater flow

Analytical solutions are obtained by the Fourier transform technique for the one-, two-, and three-dimensional transport of a conservative solute injected instantaneously in a uniform groundwater flow. These solutions account for dispersive non-linearity caused by the heterogeneity of the hydraulic properties of aquifer systems and can be used as building blocks to construct solutions by convolution (principle of superposition) for source conditions other than slug injection. The dispersivity is assumed to vary parabolically with time and is thus constant for the entire system at any given time. Two approaches for estimating time-dependent dispersion parameters are developed for two-dimensional plumes. They both require minimal field tracer test data and, therefore, represent useful tools for assessing real-world aquifer contamination sites. The first approach requires mapped plume-area measurements at two specific times after the tracer injection. The second approach requires concentration-versus-time data from two sampling wells through which the plume passes. Detailed examples and comparisons with other procedures show that the methods presented herein are sufficiently accurate and easier to use than other available methods.

Journal of Hydrology↗

Discovery of two new large submarine canyons in the Bering Sea

The Beringian continental margin is incised by some of the world's largest submarine canyons. Two newly discovered canyons, St. Matthew and Middle, are hereby added to the roster of Bering Sea canyons. Although these canyons are smaller and not cut back into the Bering shelf like the five very large canyons, they are nonetheless comparable in size to most of the canyons that have been cut into the U.S. eastern continental margin and much larger than the well-known southern California canyons. Both igneous and sedimentary rocks of Eocene to Pliocene age have been dredged from the walls of St. Matthew and Middle Canyons as well as from the walls of several of the other Beringian margin canyons, thus suggesting a late Tertiary to Quaternary genesis of the canyons. We speculate that the ancestral Yukon and possibly Anadyr Rivers were instrumental in initiating the canyon-cutting processes, but that, due to restrictions imposed by island and subsea bedrock barriers, cutting of the two newly discovered canyons may have begun later and been slower than for the other five canyons.

Bering Sea↗

Foraminiferal biostratigraphy of the shelf edge: a key to late Quaternary paleoenvironments

Foraminiferal assemblages in eight piston cores from West Flower Garden Bank at the edge of the Texas continental shelf contain a nearly complete record of late Quaternary paleoclimatic and geologic events. The faunas are divisible into three distinct successive biofacies on the basis of both planktonic and benthic foraminifers: the basal Inflata Facies accumulated in cool shallow waters during late Pleistocene glaciation; the middle Crassaformis Facies represents a deepening sea that had warming surface waters; the upper Cultrata Facies is characteristic of the Holocene outer-shelf environment. Sea level was at -73 m and -53 m at the end of deposition of the Inflata and Crassaformis Facies, respectively. The biostratigraphic events at West Flower Garden Bank can be accurately correlated with those recorded in the middle and inner shelf and in deep-sea cores. The sequence of late Quaternary sea level and paleotemperature changes in the northern Gulf of Mexico can thereby be reconstructed. Eventually, this knowledge can be integrated with similar data from the shelf edge in other parts of the world to help bridge the gap between the known Quaternary record of the deep sea and that of the continents. ?? 1976.

Palaeogeography, Palaeoclimatology, Palaeoecology↗

The terminal Eocene event and the Polish connection

The Eocene/Oligocene boundary in Europe is marked by major discontinuities in all environments: the “Grande Coupure” in continental mammals; the elimination of semitropical elements from high-latitude floras; the virtually complete replacement of the shallow-marine malacofauna; and an extraordinary downslope excursion of carbonate deposition in deep-ocean basins (drop in the CCD). These phenomena collectively represent the “Terminal Eocene Event” (TEE). In the Carpathian Mountains, the TEE is manifested in the thin but regionally persistent Globigerina Marl, a calcareous unit containing abundant cool-water microplankton that occurs within very thick, siliceous, bathyal flysch sequences. In southern Poland, the marl is of very latest Eocene age, within planktonic foraminifera zone P17, calcareous nannoplankton zone NP19/20, and the zone of the dinoflagellate Rhomdodinium perforatum . Zircons from bentonites bracketing the marl are dated by fission-track analysis; at Polany, two underlying bentonites are 41.7 and 39.8 Ma, and at Znamirowice two overlying bentonites are 34.6 and 28.9 Ma, in sequence. This accords with glauconite K/Ar ages in Western Europe by which the Eo/Oligocene boundary age is estimated at 37–38 Ma. Global correlations indicate that the TEE corresponds to a major glacio-eustatic regression with a duration of about 0.5 Ma, in which a large Antarctic ice cap was formed, the ocean circulation was permanently changed to the psychrospheric condition, and world climate shifted irreversibly towards the modern state.

Palaeogeography, Palaeoclimatology, Palaeoecology↗

Arid land monitoring using Landsat albedo difference images

The Landsat albedo, or percentage of incoming radiation reflected from the ground in the wavelength range of 0.5 [mu]m to 1.1 [mu]m, is calculated from an equation using the Landsat digital brightness values and solar irradiance values, and correcting for atmospheric scattering, multispectral scanner calibration, and sun angle. The albedo calculated for each pixel is used to create an albedo image, whose grey scale is proportional to the albedo. Differencing sequential registered images and mapping selected values of the difference is used to create quantitative maps of increased or decreased albedo values of the terrain. All maps and other output products are in black and white rather than color, thus making the method quite economical. Decreases of albedo in arid regions may indicate improvement of land quality; increases may indicate degradation. Tests of the albedo difference mapping method in the Desert Experimental Range in southwestern Utah (a cold desert with little long-term terrain change) for a four-year period show that mapped changes can be correlated with erosion from flash floods, increased or decreased soil moisture, and increases or decreases in the density of desert vegetation, both perennial shrubs and annual plants. All terrain changes identified in this test were related to variations in precipitation. Although further tests of this method in hot deserts showing severe "desertification" are needed, the method is nevertheless recommended for experimental use in monitoring terrain change in other arid and semiarid regions of the world.

Utah↗

Blueschist-facies metamorphism related to regional thrust faulting

Rocks of the blueschist (glaucophane schist) facies occur throughout the world in narrow tectonic belts associated with ultramafic rocks. In the Coast Range province of California, blueschist rocks are devloped in the eugeosynclinal Franciscan Formation of Late Mesozoic age. The blueschist rocks form a narrow belt for more than 800 km along the eastern margin of this province and commonly are separated from rocks of an overlying thrust plate by serpentinite. Increasing metamorphism upward toward the thrust fault is indicated mineralogically by a transition from pumpellyite to lawsonite and texturally by a transition from metagraywacke to schist. The blueschist metamorphism probably occurred during thrusting in a zone of anomalously high water pressure in the lower plate along the sole of the thrust fault. This tectonic mode of origin for blueschist differs from the generally accepted hypothesis involving extreme depth of burial. Other belts of blueschist-facies rocks, including the Sanbagawa belt of Japan, the marginal synclinal belt of New Zealand, and the blueschist-ultramafic belts of Venezuela, Kamchatka, Ural mountains, and New Caledonia have similar geologic relations and might be explained in the same manner.

Tectonophysics↗

Accumulation of fossil fuels and metallic minerals in active and ancient rift lakes

A study of active and ancient rift systems around the world suggests that accumulations of fossil fuels and metallic minerals are related to the interactions of processes that form rift valleys with those that take place in and around rift lakes. The deposition of the precursors of petroleum, gas, oil shale, coal, phosphate, barite, Cu-Pb-Zn sulfides, and uranium begins with erosion of uplifted areas, and the consequent input of abundant nutrients and solute loads into swamps and tectonic lakes. Hot springs and volcanism add other nutrients and solutes. The resulting high biological productivity creates oxidized/reduced interfaces, and anoxic and H 2 S-rich bottom waters which preserves metal-bearing organic tissues and horizons. In the depositional phases, the fine-grained lake deposits are in contact with coarse-grained beach, delta, river, talus, and alluvial fan deposits. Earthquake-induced turbidites also are common coarse-grained deposits of rift lakes. Postdepositional processes in rifts include high heat flow and a resulting concentration of the organic and metallic components that were dispersed throughout the lakebeds. Postdepositional faulting brings organic- and metal-rich sourcebeds in contact with coarse-grained host and reservoir rocks. A suite of potentially economic deposits is therefore a characteristic of rift valleys.

Tectonophysics↗

A review of crust and upper mantle structure studies of the Snake River Plain-Yellowstone volcanic system: A major lithospheric anomaly in the western U.S.A.

The Snake River Plain-Yellowstone volcanic system is one of the largest, basaltic, volcanic field in the world. Here, there is clear evidence for northeasterly progression of rhyolitic volcanism with its present position in Yellowstone. Many theories have been advanced for the origin of the Snake River Plain-Yellowstone system. Yellowstone and Eastern Snake River Plain have been studied intensively using various geophysical techniques. Some sparse geophysical data are available for the Western Snake River Plain as well. Teleseismic data show the presence of a large anomalous body with low P- and S-wave velocities in the crust and upper mantle under the Yellowstone caldera. A similar body in which compressional wave velocity is lower than in the surrounding rock is present under the Eastern Snake River Plain. No data on upper mantle anomalies are available for the Western Snake River Plain. Detailed seismic refraction data for the Eastern Snake River Plain show strong lateral heterogeneities and suggest thinning of the granitic crust from below by mafic intrusion. Available data for the Western Snake River Plain also show similar thinning of the upper crust and its replacement by mafic material. The seismic refraction results in Yellowstone show no evidence of the low-velocity anomalies in the lower crust suggested by teleseismic P-delay data and interpreted as due to extensive partial melting. However, the seismic refraction models indicate lower-than-normal velocities and strong lateral inhomogeneities in the upper crust. Particularly obvious in the refraction data are two regions of very low seismic velocities near the Mallard Eake and Sour Creek resurgent domes in the Yellowstone caldera. The low-velocity body near the Sour Creek resurgent dome is interpreted as partially molten rock. Together with other geophysical and thermal data, the seismic results indicate that a sub-lithospheric thermal anomaly is responsible for the time-progressive volcanism along the Eastern Snake River Plain. However, the exact mechanism responsible for the volcanism and details of magma storage and migration are not yet fully understood.

California, Idaho, Montana, Nevada, Oregon, Washin↗

The Richter scale: its development and use for determining earthquake source parameters

The M L scale, introduced by Richter in 1935, is the antecedent of every magnitude scale in use today. The scale is defined such that a magnitude-3 earthquake recorded on a Wood-Anderson torsion seismometer at a distance of 100 km would write a record with a peak excursion of 1 mm. To be useful, some means are needed to correct recordings to the standard distance of 100 km. Richter provides a table of correction values, which he terms -log A o , the latest of which is contained in his 1958 textbook. A new analysis of over 9000 readings from almost 1000 earthquakes in the southern California region was recently completed to redetermine the -log A o values. Although some systematic differences were found between this analysis and Richter's values (such that using Richter's values would lead to under and overestimates of M L at distances less than 40 km and greater than 200 km, respectively), the accuracy of his values is remarkable in view of the small number of data used in their determination. Richter's corrections for the distance attenuation of the peak amplitudes on Wood-Anderson seismographs apply only to the southern California region, of course, and should not be used in other areas without first checking to make sure that they are applicable. Often in the past this has not been done, but recently a number of papers have been published determining the corrections for other areas. If there are significant differences in the attenuation within 100 km between regions, then the definition of the magnitude at 100 km could lead to difficulty in comparing the sizes of earthquakes in various parts of the world. To alleviate this, it is proposed that the scale be defined such that a magnitude 3 corresponds to 10 mm of motion at 17 km. This is consistent both with Richter's definition of M L at 100 km and with the newly determined distance corrections in the southern California region. Aside from the obvious (and original) use as a means of cataloguing earthquakes according to size, ML has been used in predictions of ground shaking as a function of distance and magnitude; it has also been used in estimating energy and seismic moment. There is a good correlation of peak ground velocity and the peak motion on a Wood-Anderson instrument at the same location, as well as an observationally defined (and theoretically predicted) nonlinear relation between M L and seismic moment. An important byproduct of the establishment of the M L scale is the continuous operation of the network of Wood-Anderson seismographs on which the scale is based. The records from these instruments can be used to make relative comparisons of amplitudes and waveforms of recent and historic earthquakes; furthermore, because of the moderate gain, the instruments can write onscale records from great earthquakes at teleseismic distances and thus can provide important information about the energy radiated from such earthquakes at frequencies where many instruments have saturated.

California↗

Dikes, joints, and faults in the upper mantle

Three different types of macroscopic fractures are recognized in upper-mantle and lower-crustal xenoliths in volcanic rocks from around the world: 1. (1) joints that are tensile fractures not occupied by crystallized magma products 2. (2) dikes that are tensile fractures occupied by mafic magmas crystallized to pyroxenites, gabbros or hydrous-mineral-rich rocks, 3. (3) faults that are unfilled shear fractures with surface markings indicative of shear displacement. In addition to intra-xenolith fractures, xenoliths commonly have polygonal or faceted shapes that represent fractures exploited during incorporation of the xenoliths into the host magma that brought them to the surface. The various types of fractures are considered to have formed in response to the pressures associated with magmatic fluids and to the ambient tectonic stress field. The presence of fracture sets and crosscutting relations indicate that both magma-filled and unfilled fractures can be contemporaneous and that the local stress field can change with time, leading to repeated episodes of fracture. These observations give insight into the nature of deep fracture processes and the importance of fluid-peridotite interactions in the mantle. We suggest that unfilled fractures were opened by volatile fluids exsolved from ascending magmas to the tops of growing dikes. These volatile fluids are important because they are of low viscosity and can rapidly transmit fluid pressure to dike and fault tips and because they lower the energy and tectonic stresses required to extend macroscopic cracks and to allow sliding on pre-existing fractures. Mantle seismicity at depths of 20-65 km beneath active volcanic centers in Hawaii corresponds to the depth interval where CO2-rich fluids are expected to be liberated from ascending basaltic magmas, suggesting that such fluids play an important role in facilitating earthquake instabilities in the presence of tectonic stresses. Other phenomena related to the fractures include permeation of peridotite by fluid inclusions derived by degassing of magmas, partial melting of peridotite and dike rocks, and metasomatic alteration of peridotite host rock by magmas emplaced in fractures. These effects of magmatism generally reduce the bulk density of peridotite and might also reduce seismic velocities. The velocity contrasts between fractured and unfractured peridotite might be detected by seismic-velocity profiling techniques.

Tectonophysics↗

Third-order Middle Miocene-Early Pliocene depositional sequences in the prograding delta complex of the Pannonian Basin

Few studies exist in the geologic literature that show the distribution of seismic facies and depositional sequences within a lacustrine basin. The Pannonian Basin of Central Europe offers a unique opportunity to evaluate the influence of the eustatic signal on lacustrine deposition. Seismic stratigraphie and sedimentological studies indicate that the Middle Miocene-Early Pliocene infill of the transtensional Pannonian Basin was formed by large delta systems. Systematic sequence stratigraphie analysis of 6000 km of reflection seismic data and more than 100 hydrocarbon exploration wells in Hungary allowed the identification of twelve third-order sequence boundaries in the late Neogene sedimentary fill. This number of depositional sequences corresponds to that of the published global eustatic curve for this time period. Furthermore, based on magnetostratigraphic and radiometric data, the ages of these depositional sequences can be tentatively correlated with the global eustatic curve. The Pannonian Basin became isolated from the world sea at the Sarmatian/Pannonian (11.5 Ma) boundary and formed a large lake. The stratal patterns and sedimentary facies of individual systems tracts within the lacustrine sequences display the same characteristics as marine depositional sequences. The relatively low rate of thermal subsidence and the high rate of sediment supply resulted in a good sequence resolution. Within the third-order sequences higher-order sequences can be recognized with an average duration of about 0.1-0.5 Ma.

Tectonophysics↗

Natural occurrence and significance of fluids indicating high pressure and temperature

Most natural minerals have formed from a fluid phase such as a silicate melt or a saline aqueous solution. Fluid inclusions are tiny volumes of such fluids that were trapped within the growing crystals. These inclusions can provide valuable but sometimes ambiguous data on the temperature, pressure, and composition of these fluids, many of which are not available from any other source. They also provide “visual autoclaves” in which it is possible to watch, through the microscope, the actual phase changes take place as the inclusions are heated. This paper reviews the methods of study and the results obtained, mainly on inclusions formed from highly concentrated solutions, at temperatures ≥500°C. Many such fluids have formed as a result of immiscibility with silicate melt in igneous or high-temperature metamorphic rocks. These include fluids consisting of CO 2 , H 2 O, or hydrosaline melts that were <50% H 2 O. From the fluid inclusion evidence it is clear that a boiling, very hot, very saline fluid was present during the formation of most of the porphyry copper deposits in the world. Similarly, from the inclusion evidence it is clear that early (common) pegmatites formed from essentially silicate melts and that the late, rare-element-bearing and chamber-type pegmatites formed from a hydrosaline melt or a more dilute water solution. The evidence on whether this change in composition from early to late solutions was generally continuous or involved immiscibility is not as clear.

Physics and Chemistry of the Earth↗