USGS Science⌕ Search

SEARCH · USGS Science

Results for “River Research and Applications”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,666 records · Page 80Linked to original sources
USGS2026

Multi-site evaluation of a postfire debris-flow runout forecast method

Postfire debris flows pose a hazard to human life, property, and infrastructure when they travel from steep source areas to urbanized alluvial fans or other developed areas. Existing methods for rapid (<1 week) postfire debris-flow hazard assessment document the increase in the likelihood and size of debris flows as the magnitude of high-intensity rain necessary to initiate debris flows increases but do not indicate the extent of downstream debris-flow runout. Although many models for the simulation of debris-flow motion are available, there is no established approach for using these models to delineate locations susceptible to postfire debris-flow runout that (a) is feasible to use at the spatial scale of an entire fire; (b) is appropriate for runout onto unconfined areas; (c) reproduces observed relations between runout and rainfall intensity; and (d) characterizes inherent uncertainty in runout, even without spatiotemporally variable rainfall. We propose and evaluate a method for generating postfire debris-flow runout hazard maps that has all the above qualities. Selection of case studies prioritized events triggered by a range of rainfall intensities, locations within and outside of southern California, and observed runout onto unconfined topography. Qualitative and quantitative assessment of performance for four events indicate that simulation results broadly match observations albeit with some discrepancies at a scale larger than structure or land parcel level (approximately 20-m by 20-m). The method may be used to identify potentially hazardous areas immediately following a fire and to provide approximate runout forecasts when a storm is imminent.

Arizona, California↗
USGS2026

Use of precariously balanced rocks to constrain postglacial earthquake magnitudes in New England, United States

We use the age and fragility of 13 precariously balanced rocks (PBRs) in Massachusetts, New Hampshire, and southwestern Maine to evaluate the estimated probabilistic seismic hazard (PSH) from the U.S. Geological Survey’s National Seismic Hazard Model (NSHM), and also develop a map of maximum postglacial earthquake magnitudes in the region. The PBRs are erratic boulders left behind by the retreat of the Laurentide ice sheet between 13 and 18 ka, and published ice retreat maps are used to estimate their fragility ages. The fragilities and ages of the rocks appear to be consistent with the NSHM, in that the estimated earthquake magnitudes and resulting ground motions that would topple them are only expected on timescales longer than their fragility ages. This result, on the North American passive margin, contrasts with PBR studies at active plate boundaries, where the PBR constraints imply large reductions to estimated PSH. It may be that the PBRs are not old enough in the eastern United States to reveal the same PSH modeling issues as those revealed in the plate boundary settings. The study provides constraints on maximum magnitudes of postglacial earthquakes across much of Massachusetts, New Hampshire, and southwestern Maine, with the constraints limited to the ages of the PBRs.

Maine. Massachusetts, New Hampshire↗
USGS2025

Long-term trends in microseismicity during operational shut-ins at the Coso Geothermal Field, California

Pausing injection and production can lead to induced seismicity in a variety of settings, with some of the largest events occurring during these so-called shut-ins. In geothermal fields, shut-ins are periodically conducted for maintenance on wells and surface infrastructure, thereby offering recurring means of estimating stress changes in the subsurface that lead to increased seismicity rates. Here, we examine daily production and microseismicity data from the Coso Geothermal Field (CGF) in California between 1996 and 2010 to investigate the repetitive trends of operational shut-in microseismicity. Using 24 local seismic stations, we first analyze spatial and temporal trends of over 60,000 earthquakes with magnitudes between -0.4 to 3.8. We find that the northern region exhibits no significant seismicity changes during shut-ins, whereas the rest of the field experiences induced seismicity during almost every shut-in with an increasing intensity towards the southern and eastern portions of the field, highlighting local differences in stress within the CGF. Additionally, we cluster the seismicity using waveform cross-correlation, revealing several earthquake clusters primarily occurring during shut-in periods. These observations suggest that certain fracture and fault sections respond quicker to changes in pore pressure and poroelastic stresses within the geothermal system, possibly highlighting main fluid pathways.

California↗
USGS2024

U.S. Geological Survey Groundwater Climate Response Network—2023

As of October 2023, the U.S. Geological Survey (USGS) operated more than 660 sites across the United States and its territories as part of the Groundwater Climate Response Network (CRN). The CRN is comprised of wells and springs selected to monitor the effects of climate variability, such as droughts, on groundwater levels and spring discharge nationwide. The CRN includes more than 550 locations with realtime data and more than 100 sites with non-real-time data available to the public on the CRN web mapper and the USGS National Water Dashboard.

General Information Product↗
USGS2025

Using visualization science to inform the design of environmental decision-support tools—A case study of the U.S. Geological Survey Waterwatch

Environmental decision-support tools are increasingly being used to serve both expert and non-expert audiences. Many existing tools are primarily expert-focused, and redesigning them can be challenging because experts and non-experts interact with tools differently, existing users may be resistant to changes, and there is little guidance on how to prioritize redesign efforts and demonstrate their efficacy. In this report, we present a case study of a user-centered redesign of an established environmental decision-support tool—the U.S. Geological Survey WaterWatch. WaterWatch supports flood, drought, and other water resource management decisions through the display of water levels at gages across the United States. Using a participatory process, we identified a functional change (replacing the existing rainbow colormap), created an alternative design, and tested the alternative’s usability through two general public surveys. The results showed that replacing the rainbow colormap with a more intuitive diverging colormap improves usability, regardless of the audience’s subjective preference for the rainbow color scheme. In addition, we demonstrated the importance of using legends to improve the audience’s understanding of the map symbols. This study demonstrates how user-centered design approaches can be used to inform the design of high-profile products and tools.

Scientific Investigations Report↗
USGS1997

An optimized network for phosphorus load monitoring for Lake Okeechobee, Florida

Phosphorus load data were evaluated for Lake Okeechobee, Florida, for water years 1982 through 1991. Standard errors for load estimates were computed from available phosphorus concentration and daily discharge data. Components of error were associated with uncertainty in concentration and discharge data and were calculated for existing conditions and for 6 alternative load-monitoring scenarios for each of 48 distinct inflows. Benefit-cost ratios were computed for each alternative monitoring scenario at each site by dividing estimated reductions in load uncertainty by the 5-year average costs of each scenario in 1992 dollars. Absolute and marginal benefit-cost ratios were compared in an iterative optimization scheme to determine the most cost-effective combination of discharge and concentration monitoring scenarios for the lake. If the current (1992) discharge-monitoring network around the lake is maintained, the water-quality sampling at each inflow site twice each year is continued, and the nature of loading remains the same, the standard error of computed mean-annual load is estimated at about 98 metric tons per year compared to an absolute loading rate (inflows and outflows) of 530 metric tons per year. This produces a relative uncertainty of nearly 20 percent. The standard error in load can be reduced to about 20 metric tons per year (4 percent) by adopting an optimized set of monitoring alternatives at a cost of an additional $200,000 per year. The final optimized network prescribes changes to improve both concentration and discharge monitoring. These changes include the addition of intensive sampling with automatic samplers at 11 sites, the initiation of event-based sampling by observers at another 5 sites, the continuation of periodic sampling 12 times per year at 1 site, the installation of acoustic velocity meters to improve discharge gaging at 9 sites, and the improvement of a discharge rating at 1 site.

Florida↗
USGS2026

Ground motions from finite faults with unknown geometry

Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.

Bulletin of the Seismological Society of America↗
USGS2026

Northern bobwhites select for native grasses on working grazing land

Northern bobwhite ( Colinus virginianus ; bobwhite) populations have experienced an 85% decline across most of its range since the 1960s. The most drastic decreases have been in the southeastern United States where biologists attribute the decline to widespread habitat loss, including conversion of native grasslands to tall fescue ( Lolium arundinaceum ) and other exotic cool-season grass (CSG) pasture and hayfields. Including agricultural lands in conservation programs could improve habitat conditions on a regional scale. One working-lands conservation strategy involves the use of native warm-season grasses (NWSGs) rather than cool-season exotic grasses as economically viable cattle forage. To evaluate this management practice for creating bobwhite habitat, we conducted a field study on a bobwhite population in eastern Kentucky, USA, where grazed NWSG and burned NWSG fields were adjacent to exotic grazed and exotic hayed CSG fields. Between April 2019 and October 2022, we used radio telemetry to track bobwhites to evaluate resource selection at second- and third-order scales. Bobwhites used traditionally managed CSGs less than would be expected by chance at the second-order scale in both breeding and non-breeding seasons. Bobwhite use of grazed NWSG and burned NWSG was greater than would be expected by chance at the second-order scale in both breeding and non-breeding seasons. Similarly, at the third-order scale, bobwhites used CSGs less than would be expected by chance, whereas NWSGs and woody stems were used more than by chance alone. Our study suggests that bobwhites select NWSGs at multiple spatial scales despite broad-scale availability of managed exotic CSGs. Under a working-lands framework, the integration of NWSGs into working lands could create bobwhite habitat in the southeastern United States, especially if woody stems are present.

Kentucky↗
USGS2024

A great tsunami earthquake component of the 1957 Aleutian Islands earthquake

The great 1957 Aleutian Islands earthquake ruptured ∼1200 km of the plate boundary along the Aleutian subduction zone and produced a destructive tsunami across Hawaiʻi. Early seismic and tsunami analyses indicated that large megathrust fault slip was concentrated in the western Aleutian Islands, but tsunami waves generated by slip in the west cannot explain the large observed runup in Hawaiʻi far to the southeast. Recently mapped 1957 geologic deposits on eastern Aleutian Islands suggest occurrence of very large nearby slip. Jointly modeling tsunami runup along the eastern Aleutian and Hawaiian Islands together with tide gauge recordings across the Pacific resolves 12-26 m shallow slip along 600 km of the eastern Aleutian Islands in addition to modest, deeper western slip inferred from seismic records. The eastern near-trench slip results in an M W 8.3-8.6 tsunami earthquake component of the M W 8.6-8.8 rupture, comparable in size to the adjacent 1946 Aleutian tsunami earthquake to the east. The reexamination of the 1957 rupture confirms the tsunami hazards posed by the eastern Aleutian subduction zone to Hawaiʻi and lays the groundwork for investigation of large prehistoric earthquakes through modeling tsunami runup inferred from stratigraphic observations to constrain their rupture processes.

Alaska↗
USGS2025

Formation of the Mount Weld rare earth element deposit, Western Australia: A carbonatite-derived laterite

Carbonatite-hosted rare earth element (REE) deposits are the primary source of the world’s light REEs. The Mount Weld REE deposit in Western Australia is hosted in a lateritic sequence that reflects supergene enrichment of the underlying carbonatite. Water-rock interaction is a key to the formation of this world-class deposit. REE enrichment in the laterite is controlled by the breakdown of primary minerals, the release and transport of REEs, and the formation of secondary minerals. Secondary REE-bearing phosphate minerals are the primary REE-host phases in the laterite ore with monazite as the dominant phase; other REE-bearing phases include rhabdophane, cerianite, churchite, florencite, and crandallite subgroup minerals. Profiles through the laterite show that in the REE-rich zone, apatite and primary calcite and dolomite have broken down such that the loss of Ca and Mg, as well as Si and K, leads to a relative increase in the REEs. Sequestering of REEs in secondary mineral phases formed by groundwater further enhances the REE concentration.

Mount Weld Mine↗
USGS2026

Deep critical zone controls on shallow landslides

The deep critical zone (CZ) has long been recognized for its importance in influencing shallow landslides but was not considered feasible to include in slope stability models at the watershed scale. In this study, we demonstrate that simple approximations of the CZ in a fully coupled hydrologic and soil slope stability model can effectively capture the location, timing, and likely size of shallow landslides. To achieve this, we use coupled, process-based models that incorporate the effects of 1) deep CZ structures, 2) three-dimensional transient hydrology, and 3) multidimensional slope stability, calibrated with data from an intensively monitored field site. Our results show that the hydrologically active deep CZ guides groundwater flow, influencing where it drains from or exfiltrates to the soil mantle, producing distinct patterns of soil saturation and seepage forces at the soil-bedrock boundary. Deep conductive weathered critical zone drains the soil mantle, reducing the likelihood of destabilizing pore pressures, while the downslope thinning of the CZ forces groundwater to the surface. This creates localized instability and a tendency for similar-sized landslides across the landscape. In contrast, the absence of conductive weathered bedrock results in more widespread destabilizing pore pressures, leading to larger landslides and the likelihood of landslides earlier in a storm than in landscapes underlain by a deep CZ. Our findings suggest that first-order variations of deep CZ can provide physical explanations for variations observed in the susceptibility, magnitude, and timing of shallow landslides, and that CZ structure may be inferred from patterns and timing of landsliding.

Proceedings of the National Academy of Sciences↗
USGS2026

Discrete element investigation of the influence of shallow soil density on the manifestations of strike-slip surface fault rupture

This study investigates the influence of soil relative density on strike-slip surface fault rupture manifestations using three-dimensional numerical simulations performed with the discrete element method (DEM). The simulations capture the formation of distinctive fault strands within complex flower structures using tens of millions of grains. The tendency for dense soils to localize shear manifests as multiple localized shear bands within wide zones of deformation in strike-slip fault rupture, whereas diffuse shear deformation develops within narrow zones in loose soils. The spatial extents of soil deformation are consistent between simulations having similar relative densities but with different quantities of grains. However, individual shears are more distinguishable in assemblages of finer grains than in assemblages of coarser grains. The simulations show the progressive development of new shears within the bounds of previously developed shears. Shear activity transitions inward as fault activity diminishes along the outermost shears and continues along newly developed shears until a vertically dipping throughgoing shear structure develops that accommodates most of the fault displacement thereon. The throughgoing fault develops at smaller fault displacements in looser soils because the first shear rupture propagates closer to the vertical direction and does not undergo as much inward translation of shear activity, as is observed in denser soils. In all simulations, ground surface uplift develops between nonintersecting active shears, and ground surface subsidence tends to develop where new shears intersect previous shears. The surface traces in these simulations are shown to be consistent with analog models and case histories of surface fault rupture occurring in different shallow subsurface materials. Although computationally costly, these modeling results are valuable for providing a strong numerical supplement to traditional analog models used to represent the mechanics of strike-slip zones in soil, and they provide quantifiable stresses and large-strain deformations throughout the model domain.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2023

Explosive trachyte eruptions from the Al Efairia volcanic center in northern Harrat Rahat, Kingdom of Saudi Arabia

Harrat Rahat is an alkali basalt, continental, intraplate volcanic field located within the central-western part of the Kingdom of Saudi Arabia. The northern quarter of Harrat Rahat contains evolved volcanic products that achieve trachyte compositions (>60 weight percent SiO 2 ). Within the Al Efairia volcanic center, pyroclastic-flow and -surge deposits that reflect explosive trachyte volcanism (and minor exposed lava domes that reflect effusive trachyte eruptions) sit at the surface as the youngest expression of volcanic activity within this part of the Harrat Rahat volcanic field. Five trachyte deposits emplaced explosively have been identified within the Al Efairia volcanic center based on geologic mapping, petrography, geochemistry, and paleomagnetism. These units are the trachytes of Um Rgaibah, Gura 5, Gura 4, Al Efairia, and Al Qayf, in descending stratigraphic order. Here, we present 14 40 Ar/ 39 Ar analyses from four of these units, which yield eruption ages of 4.2±5.2 thousand years (ka) for the trachyte of Um Rgaibah, 79.7±1.6 ka for the trachyte of Gura 5, 84.3±1.6 ka for the trachyte of Gura 4, and 88.0±1.8 ka for the trachyte of Al Efairia. The eruption age of the trachyte of Al Qayf has been constrained to between 410.3±3.4 and 418.8±1.9 ka using paleomagnetic correlations and 40 Ar/ 39 Ar ages from overlying and underlying intermediate composition lava flows. Most of these trachytes have distinct geochemical compositions, petrographic characteristics, and directions of remanent magnetization. The exceptions are for the trachytes of Gura 4 and Gura 5, which overlap in their geochemical, petrographic, paleomagnetic, and geochronologic affinities. Based on these similarities, we interpret the trachytes of Gura 4 and Gura 5 to have erupted during a closely spaced (a few decades) time interval from the same magma batch but from craters that are >2 kilometers (km) apart. The eruption of the trachyte of Al Efairia at 88.0±1.8 ka is the result of a different magma batch that erupted a few thousand years prior to the trachytes of Gura 4 and Gura 5. The Al Efairia volcanic center is remarkably different from the Matan volcanic center located ~10 km to the north, which has also erupted young (<150 ka) trachytes. The Matan volcanic center has been shown to produce trachyte compositions only after eruption of basalt followed by intermediate lava flows, whereas only trachyte compositions have erupted within the Al Efairia volcanic center over this same time interval.

Al Efairia volcanic center, Harrat Rahat↗
USGS1976

Corwin Springs Known Geothermal Resources Area, Park County, Montana

The Corwin Springs Known Geothermal Resources Area (KGRA) is contiguous to Yellowstone National Park along a part of the northern boundary of the park near Gardiner, Park County, Mont. The area contains two known sites of hot-spring activity--LaDuke Spring, 2.8 km southeast of the small resort community of Corwin Springs, and Bear Creek Spring, 2.6 km east of Gardiner. LaDuke Spring issues from brecciated quartzite and has a flow rate of 380 1/min, a surface water temperature of 65°C, a silica-geothermometer temperature of 68.7°C, and a Na-K-Ca geothermometer temperature of 76.8°C. Bear Creek Spring issues from limestone and has a flow rate of 4 1/min, a surface water temperature of 32°C, a silica temperature of 46.7°C, and a Na-K-Ca temperature of 87.2°C. The springs, which are actively depositing travertine, are on or near the trace of the Gardiner fault-a high-angle reverse fault which forms the southwestern boundary of the Beartooth uplift. Features that make the Corwin Springs KGRA potentially significant include: (1) Proximity of the Corwin Springs area to significant Pliocene and Pleistocene volcanism in Yellowstone National Park and related geothermal activity, (2) existence of a large potential geothermal reservoir in the northern extension of the Sepulcher Mountain graben, (3) localization of thermal activity along the Gardiner fault in the Corwin Springs area, (4) occurrence of negative gravity anomaly centered over the northern end of the Sepulcher Mountain graben, (5) existence of negative magnetic anomaly in the Corwin Springs area, (6) location of the area within the Intermountain seismic belt, (7) evidence of recent tectonism in the area, as demonstrated by Pleistocene and Holocene faulting, and (8) observed surface temperatures and estimated geochemical temperatures of the two known hot springs (features which do not indicate high subsurface temperatures).

Montana↗
USGS2024

A partially nonergodic ground-motion model for Fourier amplitude spectra for the San Francisco Bay area, California, USA

We develop a partially nonergodic ground-motion model (GMM) for Fourier amplitude spectra for the San Francisco Bay Area, California, USA, using the Bayless and Abrahamson (2019) GMM as a reference ergodic GMM and developing location-dependent adjustments to the predicted median and variance. We compile regional ground-motion data from moment magnitude (𝑀 w ) >3 earthquakes occurring during 2000–2022 for which magnitude information is available in the U.S. Geological Survey Comprehensive Catalog (Guy et al., 2015). The data set predominantly consists of records from 𝑀 w 3.5–4.5 earthquakes but includes three well-recorded 𝑀 w > 5 events. Ground-motion residuals are evaluated using the time-averaged shear-wave velocity in the top 30 m (𝑉 S30 ) from the California-specific map of Thompson et al. (2018) and basin-depth site parameters from the seismic velocity model of Aagaard and Hirakawa (2021). The 𝑉 S30 dependence and basin-depth scaling of the reference ergodic GMM of Bayless and Abrahamson (2019) are evaluated and modified with the updated data set. We compute maps of site adjustments using a varying-coefficient model that considers the spatial correlation structure and uncertainties at each observation location. The spatial covariance model is developed using ground-motion residuals that are standardized by the uncertainty model, which allows for consideration of the aleatory variability in developing the site adjustments. The covariance model is fit considering the means and standard deviations of the site terms at all locations. The use of partially nonergodic median adjustments results in modified variance components of the within-event variability. Due to the low number of large-magnitude earthquakes that control seismic hazard in the data set, we do not modify between-event variance; however, we present adjustments to site-to-site variability for use in partially nonergodic hazard assessments.

California↗
USGS2024

The Europa Imaging System (EIS) investigation

The Europa Imaging System (EIS) consists of a Narrow-Angle Camera (NAC) and a Wide-Angle Camera (WAC) that are designed to work together to address high-priority science objectives regarding Europa’s geology, composition, and the nature of its ice shell. EIS accommodates variable geometry and illumination during rapid, low-altitude flybys with both framing and pushbroom imaging capability using rapid-readout, 8-megapixel (4k × 2k) detectors. Color observations are acquired using pushbroom imaging with up to six broadband filters. The data processing units (DPUs) perform digital time delay integration (TDI) to enhance signal-to-noise ratios and use readout strategies to measure and correct spacecraft jitter. The NAC has a 2.3° × 1.2° field of view (FOV) with a 10-μrad instantaneous FOV (IFOV), thus achieving 0.5-m pixel scale over a swath that is 2 km wide and several km long from a range of 50 km. The NAC is mounted on a 2-axis gimbal, ±30° cross- and along-track, that enables independent targeting and near-global (≥90%) mapping of Europa at ≤100-m pixel scale (to date, only ∼15% of Europa has been imaged at ≤900 m/pixel), as well as stereo imaging from as close as 50-km altitude to generate digital terrain models (DTMs) with ≤4-m ground sample distance (GSD) and ≤0.5-m vertical precision. The NAC will also perform observations at long range to search for potential erupting plumes, achieving 10-km pixel scale at a distance of one million kilometers. The WAC has a 48° × 24° FOV with a 218-μrad IFOV, achieving 11-m pixel scale at the center of a 44-km-wide swath from a range of 50 km, and generating DTMs with 32-m GSD and ≤4-m vertical precision. The WAC is designed to acquire three-line pushbroom stereo and color swaths along flyby ground-tracks.

Space Science Reviews↗
USGS2026

Estimating the importance of floating surface material to the total phosphorus transport in Silver Creek, Wisconsin using Particle Image Velocimetry

Various techniques are used to estimate nutrient delivery in streams that combine flow and water-quality data. However, the transport of surface floating material is difficult to measure, and is therefore typically neglected when stream sampling and in the estimated nutrient delivery. Here, we describe an approach to estimate the amount of material (duckweed ( Lemna genus), filamentous algae, and other macrophyte fragments) and associated nutrients (in this case, phosphorus, P) transported on the surface of Silver Creek, Wisconsin, to determine if this material is an important transport mechanism and if historical P loads were underestimated. This approach includes estimating the transport of surface material using 10 s videos collected every 15 min from a downward-looking camera installed beneath a bridge. The average velocity of the surface material was first determined using Large-Scale Particle Image Velocimetry (LSPIV), which uses short videos to analyze surface particle movement. The amount of surface material in each video was then computed using computer-vision techniques. The P load associated with the transported surface material was then estimated by combining surface velocities, coverage of floating material, and laboratory-measured P content. Surface material transported ~9–11% of the total summer P load and ~4–7% of the annual load in Silver Creek.

Wisconsin↗
USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗