SEARCH · USGS Science

Results for “Mining Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

USGS2005

Subtle structural influences on coal thickness and distribution: Examples from the Lower Broas-Stockton coal (Middle Pennsylvanian), Eastern Kentucky Coal Field, USA

The Lower Broas-Stockton coal is a heavily mined coal of the Central Appalachian Basin. Coal thickness, distribution, composition, and stratigraphic position were compared with basement structure, gas and oil field trends, and sequence strat- igraphic and paleoclimate interpretations to better understand the geology of the Stockton coal bed in eastern Kentucky. The thickest coal occurs south of the Warfield structural trend and east of the Paint Creek Uplift, two basement-related structures. Along the Warfield trend, coal beds in the underlying Peach Orchard coal zone locally merge with the Stockton coal to form a seam more than 3 m thick. Other areas of thick coal occur in elongate trends. Two pairs of elongate, conjugate trends in Stockton coal thickness are interpreted as regional paleofractures that influenced paleotopography and groundwater during peat accumulation. Compositional group analyses indicate that the Stockton peat infilled depressions in the paleotopography as a topogenous to soligenous mire codominated by tree ferns and lycopsid trees. Flooding from adjacent paleochannels is indicated by partings and seam splits along the margins of the mineable coal body. One or more increments of low-vitrinite coal, dominated by tree ferns and shrubby, Densosporites-producing lycopsids occur at all sample sites. Similar assemblages have been previously used to identify ombrogenous, domed mire origins for Early and Middle Pennsylvanian coals in which ash yields were less than 10%. It is difficult, however, to reconcile ombrogenous conditions with the partings in the Stockton coal in this area. Low-ash, low-vitrinite increments may have been formed in topogenous to soligenous mires with periodic drying or water-table fluctuations, rather than widespread doming. This is consistent with interpretations of increasingly seasonal paleoclimates in the late Middle and Late Pennsylvanian and fracture-influenced groundwater conditions. ??2005 Geological Society of America.

Special Paper of the Geological Society of America↗

USGS1987

Mines, prospects, and occurrences of metallic minerals and barite, Springfield 1° by 2° Quadrangle, Missouri

This map is part of a folio of maps of the Springfield 1° x 2° quadrangle, Missouri, prepared under the Conterminous United States Mineral Assessment Program. Other publications in this folio to data include U.S. Geological Survey Miscellaneous Field Studies Maps MF-1830-A and B and Missouri Geological Survey Open-file Report OFR-85-42-MR. Additional maps showing various geologic aspects of the Springfield quadrangle will be published as U.S. Geological Survey Miscellaneous Field Studies Maps bearing this same serial number with different letter suffixes (MF-1830-D, E).

Missouri↗

USGS1988

Heavy-Mineral Placer Potential Map of the U.S. Continental Shelf, Western and Northern Gulf of Mexico

The establishment of the Exclusive Economic Zone (EEZ) in 1983 by Presidential Proclamation opened for natural resource exploration a vast offshore frontier area contiguous to the United States and its territories. The EEZ extends from the seaward limit of state waters (3 nautical mi from shore) to 200 nautical mi offshore, and it includes the continental shelves. Within the context of the EEZ natural resource assessment effort, the purpose of this study is to delineate, on a regional basis, the potential for heavy-mineral placers on the U.S. Continental Shelf in the western and northern Gulf of Mexico from the United States-Mexico border to the Alabama-Florida state line. This map is intended to serve as a general guide for placer exploration. It shows favorable sea-floor areas for placer occurrence in water depths ranging from 0 to 100 fathoms (600 ft). The map can be used as a guide for focusing costly exploratory efforts, such as coring operations and geophysical surveys. The potential economic value of heavy-mineral placer concentrations on the U.S. Continental Shelf is a function of both geologic and economic variables. Geologic variables include the composition and concentration of the heavy-mineral assemblages and their environment of deposition. Economic variables include the current world market price of extracted metals, as well as the cost of mining, processing, and marketing the metals. These economic factors, in turn, are tempered by the nation1s socio-political climate, which determines its need for specific mineral resources at any given time.

Miscellaneous Field Studies Map↗

USGS1989

Mineral occurrence and drill-hole location map of the International Falls 1 degree by 2 degrees quadrangle, Minnesota and Ontario

A project to assess the mineral potential of the U.S. part of the International Fall 1° x 2° quadrangle was undertaken by the U.S. Geological Survey (USGS) in the early 1984, as part of the Conterminous United States Mineral Assessment Program (CUSMAP). Because glacial drift covers most of the basement rocks south of the U.S.-Canada border and mineral production in this part of Minnesota has been virtually nonexistent, data from the adjacent part of Ontario has been used to understand the geologic framework and to evaluate mineral-deposit models relevant to the assessment of the U.S. part of the International Falls quadrangle. This map and accompanying tables show the locations of mineral occurrences, prospects and mines in both Canada and the United States, and summarize their lithologic association and the characteristic metals found in them. Locations of drill holes within the United States and completed before 1987 are also included on the map.

Minnesota, Ontario↗

USGS2010

Porphyry copper deposit model

This report contains a revised descriptive model of porphyry copper deposits (PCDs), the world's largest source (about 60 percent) and resource (about 65 percent) of copper and a major source of molybdenum, gold and silver. Despite relatively low grades (average 0.44 percent copper in 2008), PCDs have significant economic and societal impacts due to their large size (commonly hundreds of millions to billions of metric tons), long mine lives (decades), and high production rates (billions of kilograms of copper per year). The revised model describes the geotectonic setting of PCDs, and provides extensive regional- to deposit-scale descriptions and illustrations of geological, geochemical, geophysical, and geoenvironmental characteristics. Current genetic theories are reviewed and evaluated, knowledge gaps are identified, and a variety of exploration and assessment guides are presented. A summary is included for users seeking overviews of specific topics.

Scientific Investigations Report↗

USGS1982

Water-quality and hydrogeologic data for three phosphate industry waste-disposal sites in central Florida, 1979-80

This report is a complilation of geologic, hydrologic, and water-quality data and information on test holes collected in the vicinity of gypsum stack complexes at two phosphate chemical plants and one phosphatic clayey waste disposal pond at a phosphate mine and beneficiation plant in central Florida. The data were collected from September 1979 to October 1980 at thee AMAX Phosphate, Inc., chemical plant, Piney Point; the USS AgriChemicals chemical plant, Bartow; and the International Minerals and Chemical Corporation Clear Springs mine, Bartow. Approximmmtely 5,400 field and laboratory water-quality determinations on water samples were collected from about 78 test holes and 31 surface-water, rainfall, and other sampling sites at phosphate industry beneficiation and chemical plant waste-disposal operations. Maps show locations of sampling sites. (USGS)

Florida↗

USGS2011

Distribution of trace metals at Hopewell Furnace National Historic Site, Berks and Chester Counties, Pennsylvania

Hopewell Furnace, located approximately 50 miles northwest of Philadelphia, was a cold-blast, charcoal iron furnace that operated for 113 years (1771 to 1883). The purpose of this study by the U.S. Geological Survey, in cooperation with the National Park Service, was to determine the distribution of trace metals released to the environment from an historical iron smelter at Hopewell Furnace National Historic Site (NHS). Hopewell Furnace used iron ore from local mines that contained abundant magnetite and accessory sulfide minerals enriched in arsenic, cobalt, copper, and other metals. Ore, slag, cast iron furnace products, soil, groundwater, stream base flow, streambed sediment, and benthic macroinvertebrates were sampled for this study. Soil samples analyzed in the laboratory had concentrations of trace metals low enough to meet Pennsylvania Department of Environmental Protection standards for non-residential use. Groundwater samples from the supply well met U.S. Environmental Protection Agency drinking-water regulations. Concentrations of metals in surface-water base flow at the five stream sampling sites were below continuous concentration criteria for protection of aquatic organisms. Concentrations of metals in sediment at the five stream sites were below probable effects level guidelines for protection of aquatic organisms except for copper at site HF-3. Arsenic, copper, lead, zinc, and possibly cobalt were incorporated into the cast iron produced by Hopewell Furnace. Manganese was concentrated in slag along with iron, nickel, and zinc. The soil near the furnace has elevated concentrations of chromium, copper, iron, lead, and zinc compared to background soil concentrations. Concentrations of toxic elements were not present at concentrations of concern in water, soil, or stream sediments, despite being elevated in ore, slag, and cast iron furnace products. The base-flow surface-water samples indicated good overall quality. The five sampled sites generally had low concentrations of nutrients and major ions but had elevated concentrations of iron, manganese, and strontium when compared to sites sampled in adjacent watersheds. The background site on Baptism Creek generally had the lowest concentrations and yields of constituents. Low concentrations of nutrients and major ions at all five sites indicate that measured concentrations can be attributed to general land use and geology and not to point sources. Streambed-sediment sampling results indicated higher concentrations of all metals except nickel at sites on French Creek compared to the background site on Baptism Creek. Concentrations of aluminum, cadmium, and nickel were highest in sediment from the sampling site upstream from Hopewell Furnace. The highest concentrations of arsenic, boron, cobalt, copper, iron, lead, manganese, mercury, and zinc were detected at the site just below Hopewell Furnace, which indicates that the source of these metals may be in Hopewell Furnace NHS. The invertebrate community at the background site on Baptism Creek was dominated by pollution sensitive taxa indicating a healthy, diverse benthic-macroinvertebrate community. Benthic-macroinvertebrate communities at sampling sites on French Creek indicated disturbed communities when compared to the background site on Baptism Creek and that the overall stream quality immediately above and below Hopewell Furnace NHS is degraded. The benthic-macroinvertebrate communities were dominated by pollution-tolerant taxa, and taxa were less diverse than at the background site. Habitat conditions at the upstream site on French Creek were good but were degraded at downstream sites on French Creek. The major habitat issues at these sites were related to a lack of stable substrate, erosion, and deposition. Water quality and streambed-sediment quality do not indicate that the degraded benthic-macroinvertebrate communities are the result of poor water quality. Habitat conditions (erosion and sedimentation) and physical alterations (water temperature) from the outfall of Hopewell Lake are the most likely causes of the impaired communities.

Pennsylvania↗

USGS2001

Geological and geochemical characteristics of high arsenic coals from endemic arsenosis areas in southwestern Guizhou Province, China

Southwest Guizhou Province is one of the most important areas of disseminated, sediment-hosted-type Au deposits in China and is an important area of coal production. The chemistry of most of the coals in SW Guizhou is similar to those in other parts of China. Their As content is near the Chinese coal average, but some local, small coal mines contain high As coals. The highest As content is up to 3.5 wt.% in the coal. The use of high As coals has caused in excess of 3000 cases of As poisoning in several villages. The high As coals are in the Longtan formation, which is an alternating marine facies and terrestrial facies. The coals are distributed on both sides of faults that parallel the regional anticlinal axis. The As content of coal is higher closer to the fault plane. The As content of coal changes greatly in different coal beds and different locations of the same bed. Geological structures such as anticlines, faults and sedimentary strata control the distribution of high As coals. Small Au deposits as well as Sb, Hg, and Th mineralization, are found near the high As coals. Although some As-bearing minerals such as pyrite, arsenopyrite, realgar (?), As-bearing sulfate, As-bearing clays, and phosphate are found in the high As coals, their contents cannot account for the abundance of As in some coals. Analysis of the coal indicates that As mainly exists in the form of As5+ and As3+, perhaps, combined with organic compounds. The occurrence of such exceptionally high As contents in coal and the fact that the As is dominantly organically associated are unique observations. ?? 201 Elsevier Science Ltd.

Conference Paper↗

USGS2007

Effects of Historical Coal Mining and Drainage from Abandoned Mines on Streamflow and Water Quality in Newport and Nanticoke Creeks, Luzerne County, Pennsylvania, 1999-2000

This report characterizes the effects of historical mining and abandoned mine drainage (AMD) on streamflow and water quality and evaluates potential strategies for AMD abatement in the 14-square-mile Newport Creek Basin and 7.6-square-mile Nanticoke Creek Basin. Both basins are mostly within the Northern Anthracite Coal Field and drain to the Susquehanna River in central Luzerne County, Pa. The U.S. Geological Survey (USGS), in cooperation with the Earth Conservancy, conducted an assessment from April 1999 to September 2000 that included (1) continuous stage measurement at 7 sites; (2) synoptic water-quality and flow sampling at 21 sites on June 2-4, 1999, and at 24 sites on October 7-8, 1999; and (3) periodic measurement of flow and water quality at 26 additional sites not included in the synoptic sampling effort. Stream water and surface runoff from the unmined uplands drain northward to the valley, where most of the water is intercepted and diverted into abandoned underground mines. Water that infiltrates into the mine workings becomes loaded with acidity, metals, and sulfate and later discharges as AMD at topographically low points along lower reaches of Newport Creek, Nanticoke Creek, and their tributaries. Differences among streamflows in unmined and mined areas of the watersheds indicated that (1) intermediate stream reaches within the mined area but upgradient of AMD sites generally were either dry or losing reaches, (2) ground water flowing to AMD sites could cross beneath surface-drainage divides, and (3) AMD discharging to the lower stream reaches restored volumes lost in the upstream reaches. The synoptic data for June and October 1999, along with continuous stage data during the study period, indicated flows during synoptic surveys were comparable to average values. The headwaters upstream of the mined area generally were oxygenated (dissolved oxygen range was 4.7 to 11.0 mg/L [milligrams per liter]), near-neutral (pH range was 5.8 to 7.6), and net alkaline (net alkalinity range was 2.0 to 25.0 mg/L CaCO3), with relatively low concentrations of sulfate (6.40 to 24.0 mg/L) and dissolved metals (less than 500 ug/L [micrograms per liter] of iron, manganese, and aluminum). In contrast, the AMD discharges and downstream waters were characterized by elevated concentrations of sulfate and dissolved metals that exceeded Federal and State regulatory limits. The largest AMD sources were the Susquehanna Number 7 Mine discharge entering Newport Creek near its mouth (flow range was 4.7 to 19 ft3/s [cubic feet per second]), the Truesdale Mine Discharge (Dundee Outfall) entering Nanticoke Creek about 0.5 mile upstream of Loomis Park (flow range was 0.00 to 38 ft3/s), and a mine-pit overflow entering near the midpoint of Newport Creek (flow range was 4.0 to 6.9 ft3/s). The three large discharges were poorly oxygenated (dissolved oxygen concentration range was <0.05 to 6.4 mg/L) and had elevated concentrations of sulfate (range was 710 to 890 mg/L) and low concentrations of dissolved aluminum (less than 25 ug/L), but they had distinctive concentrations of net alkalinity and dissolved iron and manganese. Effluent from the Susquehanna Number 7 Mine was near-neutral (pH range was 5.9 to 6.6) and net alkaline (net alkalinity range was 12.0 to 42.0 mg/L CaCO3) with elevated concentrations of sulfate (718 to 1,170 mg/L), dissolved iron (52,500 to 77,400 ug/L), and manganese (5,200 to 5,300 ug/L). Effluent from the Truesdale Mine also was near-neutral (pH range was 5.9 to 6.3) but had variable net alkalinity (-19.0 to 57.0 mg/L CaCO3) with elevated concentrations of sulfate (571 to 740 mg/L), dissolved iron (30,500 to 43,000 ug/L), and manganese (3,600 to 5,200 ug/L). Effluent from the mine-pit overflow in Newport Creek Basin was acidic (pH range was 4.3 to 5.0; net alkalinity range was -42 to -38 mg/L CaCO3) with elevated concentrations of sulfate (800 to 840 mg/L), iron (13,000 to 16,000 ug/L), and manganese (6,800 to 7,000 ug

Scientific Investigations Report↗

USGS2000

Puerto Rico: Marine sediments, terrestrial and seafloor imagery, and tectonic interpretations

Introduction: Puerto Rico is an island situated in the plate boundary zone between the Caribbean and the North American Plates. This is a geologically fascinating, tectonically active region, where the Caribbean Plate has over-ridden the North American Plate and is now sliding past it with strike-slip motion. The details of this tectonic interaction are poorly understood, largely because much of the region lies under water, making it difficult to study. The geologic setting of Puerto Rico has created or contributed to several pressing societal issues, related to human safety, environmental health, and economic development. Because the island lies on an active plate boundary, earthquakes are a constant threat and the densely populated coastal areas are vulnerable to tsunamis. Coastal erosion is a concern in many coastal areas, but is particularly serious to an island economy which relies heavily on a thriving tourist industry. In Puerto Rico, illegal mining of beach sands for use as aggregate has exacerbated coastal erosion and left coastal communities more exposed to the ravages of storms and tsunamis. The serious need for an affordable local source of aggregate to use in the growing construction industry on the island has created a strong interest in locating and evaluating offshore sand and gravel deposits. During the last 20 years the U.S. Geological Survey, often in cooperation with the Puerto Rico Department of Natural Resources and/or the University of Puerto Rico, has conducted a variety of projects to address the geologic aspects of these pressing societal issues. The papers and data presented here are the results of these projects. Some have been previously published elsewhere; others, such as the database of surficial sediments of the Puerto Rico insular shelf, interpretation of side-looking airborne radar imagery of the island, and the GIS data, are presented here for the first time. The purpose of this CD is to make the results of these diverse studies available in a readily accessible digital form, so that managers, planners, and other researchers can utilize the results.

Puerto Rico↗

USGS1955

Geology and ore deposits in the Reid Inlet area, Glacier Bay, Alaska, with added notes on a mineralized zone near Lituya Bay

A gold-bearing area of about 7 1/2 square miles, first discovered by Mr. Joseph Ibach in 1924, exists near the head of Glacier Bay between Reid and Lamplugh glaciers. The dominant rock type in the area is granodiorite which is intruded into bedded rocks that may be of Paleozoic age. The bedded rocks consist of conglomerate, limestone, and black graphitic schist. A light-colored quartz diorite younger than the granodiorite crops out south of the mapped area. Most of the ore deposits are found in fissure type quartz veins. These occur in both the granodiorite and in the older bedded rocks. The mineralizing solutions which brought in the gold have altered the country rock for as much as a few tens of feet to each side of the fissures. Locally, this altered rock is gold-bearing, but in the places sampled the gold content was found to be too low to permit profitable mining. Most of the quartz veins tend to be lenticular, both horizontally and vertically, and the gold tends to be concentrated in discrete spots along the veins. These factors tend to make the ore spotty and its location unpredictable. This has given rise to the concept that the ore in the area has a tendency not to continue below the surface. Geologically there appears to be no reason to believe that gold mineralization is confined to surface outcrop. The Leroy and Rainbow properties are the only two that have yielded significant quantities of gold within the mapped area, but the veins on the Highland Chief and probably the Rambler claims appear to be of sufficient size and grade to be potential ore producers. The LeRoy mine is the largest in the area. The ore body consisted of a fissure type quartz vein averaging between 2 and 3 feet in width with a length of about 60 feet, but in 1954, all of the ore in the main vein had been mined out above the main working level. Ore probably amounting to several hundreds of tons was mined and milled from the Rainbow vein. The results of an investigation of a mineralized area near Lituya Bay is included in this report. The mineralized material consists of hydrothermally altered rock found in volcanic rocks believed to be of Mesozoic age. The gold content is too low to permit profitable mining, although it is possible that undiscovered spots exist in which the gold concentration is sufficiently high to be of economic significance.

Alaska↗

USGS2017

Long-term trends of surface-water mercury and methylmercury concentrations downstream of historic mining within the Carson River watershed

The Carson River is a vital water resource for local municipalities and migratory birds travelling the Pacific Flyway. Historic mining practices that used mercury (Hg) to extract gold from Comstock Lode ore has left much of the river system heavily contaminated with Hg, a practice that continues in many parts of the world today. Between 1998 and 2013, the United States Geological Survey (USGS) collected and analyzed Carson River water for Hg and methylmercury (MeHg) concentrations resulting in a sixteen year record of unfiltered total mercury (uf.THg), filtered (dissolved) Hg (f.THg), total methylmercury (uf.MeHg), filtered MeHg (f.MeHg), and particulate-bound THg (p.THg) and MeHg (p.MeHg) concentrations. This represents one of the longest continuous records of Hg speciation data for any riverine system, thereby providing a unique opportunity to evaluate long-term trends in concentrations and annual loads. During the period of analysis, uf.THg concentration and load trended downward at rates of −0.85% and −1.8% per year, respectively. Conversely, the f.THg concentration increased at a rate of 1.7% per year between 1998 and 2005, and 4.9% per year between 2005 and 2013. Trends in flow-normalized partition coefficients for both Hg and MeHg suggest a statistically significant shift from the particulate to the filtered phase. The upwardly accelerating f.THg concentration and observed shift from the solid phase to the aqueous phase among the pools of Hg and MeHg within the river water column signals an increased risk of deteriorating ecological conditions in the lower basin with respect to Hg contamination. More broadly, the 16-year trend analysis, completed 140 years after the commencement of major Hg releases to the Carson River, provides a poignant example of the ongoing legacy left behind by gold and silver mining techniques that relied on Hg amalgamation, and a cautionary tale for regions still pursuing the practice in other countries.

Nevada↗

USGS1988

Natural aggregates of the conterminous United States

Crushed stone and sand and gravel are the two main sources of natural aggregates. These materials are commonly used construction materials and frequently can be interchanged with one another. They are widely used throughout the United States, with every State except two producing crushed stone. Together they amount to about half the mining volume in the United States. Approximately 96 percent of sand and gravel and 77 percent of the crushed stone produced in the United States are used in the construction industry. Natural aggregates are widely distributed throughout the United States in a variety of geologic environments. Sand and gravel deposits commonly are the results of the weathering of bedrock and subsequent transportation and deposition of the material by water or ice (glaciers). As such, they commonly occur as river or stream deposits or in glaciated areas as glaciofluvial and other deposits. Crushed stone aggregates are derived from a wide variety of parent bedrock materials. Limestone and other carbonates account for approximately three quarters of the rocks used for crushed stone, with granite and other igneous rocks making up the bulk of the remainder. Limestone deposits are widespread throughout the Central and Eastern United States and are scattered in the West. Granites are widely distributed in the Eastern and Western United States, with few exposures in the Midwest. Igneous rocks (excluding granites) are largely concentrated in the Western United States and in a few isolated localities in the East. Even though natural aggregates are widely distributed throughout the United States, they are not universally available for consumptive use. Some areas are devoid of sand and gravel, and potential sources of crushed stone may be covered with sufficient unconsolidated material to make surface mining impractical. In some areas many aggregates do not meet the physical property requirements for certain uses, or they may contain mineral constituents that react adversely when used as concrete aggregate. In areas where suitable natural aggregate is not available or accessible, it may become necessary to improve the quality of existing aggregate, to import aggregate from outside the area, or to substitute artificial aggregate for natural aggregate. In most cases, all of these alternatives add substantially to the cost of the final product. Even though an area may be blessed with an abundance of aggregate suitable for the intended purpose, existing land uses, zoning, or regulations may preclude commercial exploitation of the aggregate. This report also discusses the aggregate industry in general terms, including exploration, mining, and processing, as well as aggregate production rates. Proper long-range planning based on an understanding of the aggregate industry can help assure adequate supplies of aggregate.

conterminous United States↗

USGS1981

New maps of Federal coal

Compilation and analysis of publicly available data on Federal coal are resulting in voluminous map sets showing coal isopachs, structure contours, and overburden isopachs on each known minable coal bed. As of the spring of 1981, there are available from the U.S. Geological Survey Open-File Services Section in Denver map sets at 1:24,000 scale or microfiche sets covering approximately 470 of the ultimately 1,400 quadrangles in the program. Because Congress in 1976 mandated the prompt “inventorying” of all unleased Federal coal for Government land-use planning, and because dollars but not employee positions were provided for the work, the U.S. Geological Survey was obliged to contract for the compilations. A typical map set has a short text and about 20 plates, including a data sheet; a Federal mineral ownership map; and correlation charts. For each coal bed, there are isopachs, structure contours, stripping limits, and mining ratios extending as far as the data will permit, regardless of coal ownership. Reserve base tonnages and relative development potentials are calculated, but only for unleased Federal coal areas. Termed “minable” are coal beds at least 1.524 m (5 ft) thick and less than 914.4 m (3,000 ft) deep. For conventional underground mining methods, beds dipping more than 15° are excluded; also excluded are all but 3.66 m (12 ft) of thick beds. For in situ conversion methods, the minimum dip is 15° except for the deep thick beds in the Powder River Basin. Arbitrary parameters classify the development potential of each unleased 16.19-hectare (40-acre) tract as high, moderate, low, unknown, or negative. The former Secretary of the Interior announced his intention to restrict leasing in general to tracts classified as having high to moderate potential for development. Many geologists will find these systematic map compilations to be useful bases for adding new data points and making their own interpretations, correlations, extrapolations, and reserve estimates.

Geological Society of America Bulletin↗

USGS1985

Origin of discontinuities in coal-bearing strata at roaring creek (basal Pennsylvanian of Indiana)

Basal Pennsylvanian coal-bearing strata exposed along Roaring Creek, west-central Indiana, exhibit extreme lateral discontinuity. Coal seams abruptly change in thickness and elevation; they split, grade into shale, are cut out by channels and disrupted by soft-sediment deformational structures. Initial sediments were laid down by a network of southwest-flowing streams that traversed a deeply channelized upland surface of Mississippian carbonate rocks. Channels aggraded rapidly as uplands were worn down, so the region changed through time from uplands to upper deltaic plain. Local environments included channels, localized point bars, small natural levees and crevasse splays, overbank deposits, and swamps. Differential compaction and subsidence, slumping stream banks, and possibly collapsing sinkholes influenced sedimentation. As a consequence, coals are too discontinuous for economical mining, although they are locally thick and high in quality.

International Journal of Coal Geology↗

USGS2013

Sediment transport in the San Francisco Bay Coastal System: An overview

The papers in this special issue feature state-of-the-art approaches to understanding the physical processes related to sediment transport and geomorphology of complex coastal-estuarine systems. Here we focus on the San Francisco Bay Coastal System, extending from the lower San Joaquin-Sacramento Delta, through the Bay, and along the adjacent outer Pacific Coast. San Francisco Bay is an urbanized estuary that is impacted by numerous anthropogenic activities common to many large estuaries, including a mining legacy, channel dredging, aggregate mining, reservoirs, freshwater diversion, watershed modifications, urban run-off, ship traffic, exotic species introductions, land reclamation, and wetland restoration. The Golden Gate strait is the sole inlet connecting the Bay to the Pacific Ocean, and serves as the conduit for a tidal flow of ~ 8 x 109 m 3 /day, in addition to the transport of mud, sand, biogenic material, nutrients, and pollutants. Despite this physical, biological and chemical connection, resource management and prior research have often treated the Delta, Bay and adjacent ocean as separate entities, compartmentalized by artificial geographic or political boundaries. The body of work herein presents a comprehensive analysis of system-wide behavior, extending a rich heritage of sediment transport research that dates back to the groundbreaking hydraulic mining-impact research of G.K. Gilbert in the early 20th century.

California↗

USGS2014

Platinum-group elements: So many excellent properties

The platinum-group elements (PGE) include platinum, palladium, rhodium, ruthenium, iridium, and osmium. These metals have similar physical and chemical properties and occur together in nature. The properties of PGE, such as high melting points, corrosion resistance, and catalytic qualities, make them indispensable to many industrial applications. PGE are strategic and critical materials for many nations because they are essential for important industrial applications but are mined in a limited number of places and have no adequate substitutes. Exploration and mining companies have found approximately 104,000 metric tons of PGE (with minor gold) in mineral deposits around the world that could be developed. For PGE, almost all known production and resources are associated with three geologic features: the Bushveld Complex, a layered mafic-to-ultramafic intrusion in South Africa; the Great Dyke, a layered mafic-to-ultramafic intrusion in Zimbabwe; and sill-like intrusions associated with flood basalts in the Noril’sk-Talnakh area, Russia. To help predict where PGE supplies might be located, USGS scientists study how and where PGE resources are concentrated in the Earth's crust and use that knowledge to assess the likelihood that undiscovered PGE deposits may exist. Techniques used for assessing mineral resources were developed by the USGS to support the stewardship of Federal lands and evaluate mineral resource availability in a global context. The USGS also compiles statistics and information on the worldwide supply, demand, and flow of PGE. These data are all used to inform U.S. national policymakers.

Fact Sheet↗

USGS1962

Red iron-ore beds of Silurian age in northeastern Alabama, northwestern Georgia, and eastern Tennessee

Mining and smelting of iron ore in Alabama, northwestern Georgia, and eastern Tennessee date almost to Revolutionary War days, bus substantial production in the Southeast was not attained until after 1850. Numerous furnaces were erected int the region, especially in and near Birmingham, Ala., which is still the principal iron and steel-making center of the area. Locally mined iron ores formed the principal feed of the furnaces, and much of the ore was mined from red beds of Silurian age. These red beds are an abundant resource of iron ore, and they account for a large part of the total production in the Southeastern United States. Exhaustion of near-surface ores, which was easily mined and the best grade, combined with improved transportation and economies of large-scale operations elsewhere, forced most of the furnaces to shut down (Edpt. of the Interior, 1959, production statistics and tables 4-9). Geological studies have determined the lithology and approximate extent of the red iron ores of Silurian age in the Southeast. Detailed investigations have been made by private companies and government agencies. Most of this work has been in the Birmingham, Ala., district, and the remainder of the region has relatively little study in recent years.

Alabama, Georgia, Tennessee↗