USGS Science⌕ Search

SEARCH · USGS Science

Results for “Landslides”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources
USGS2024

Plan to coordinate post-earthquake investigations supported by the National Earthquake Hazards Reduction Program (NEHRP)

Introduction This report presents a plan supported by the National Earthquake Hazards Reduction Program (NEHRP) to coordinate domestic and international post-earthquake investigations (herein called “the Plan”). Post-earthquake scientific and engineering investigations are undertaken to capture critical information to understand the causes and impacts of the event, lessons from which can substantially improve the Nation’s resilience after future earthquakes. NEHRP is the Federal Government’s coordinated nationwide program to reduce risks to life and property from earthquakes. The Plan describes the activation and coordination of the four designated NEHRP Agencies in the Federal Government: Federal Emergency Management Agency, National Institute of Standards and Technology, U.S. National Science Foundation, and U.S. Geological Survey (USGS). The Plan also describes coordination between NEHRP Agencies and other organizations that may participate in pre-event and post-earthquake investigations, including non-NEHRP Federal agencies; State, regional, local, Tribal, and territorial agencies; domestic nongovernmental organizations; academic institutions and affiliated organizations; private companies; foreign governmental agencies and nongovernmental organizations; and international organizations. The Plan delineates the coordination of NEHRP post-earthquake scientific and engineering investigations to document the direct, indirect, and cascading physical and societal impacts from fault rupture and ground shaking hazards and from secondary hazards such as landslides, liquefaction, and tsunamis. In addition, the Plan identifies pre-event activities necessary to ensure that post-earthquake investigations are executed effectively. The USGS is the lead NEHRP Agency for activating and coordinating NEHRP post-earthquake investigations and for implementing this Plan. The USGS also leads coordination of the NEHRP Agencies in completing the pre-event activities identified in the Plan. The Plan has new information and supersedes USGS Circular 1242, “The Plan to Coordinate NEHRP Post-Earthquake Investigations,” which was published in 2003. This second-generation Plan was developed with the assistance of the Applied Technology Council (ATC) of Redwood City, California, under USGS contract 140G0121P0309, ATC-155. A 17-member Project Review Panel provided guidance on plan development, and input was solicited from subject matter experts representing key stakeholder groups and from participants at a public workshop.

Circular↗
USGS2024

U.S. Geological Survey Earthquake Hazards Program decadal science strategy, 2024–33

Executive Summary Earthquakes represent one of our Nation’s most significant and costly natural hazards, with estimated annual loses from earthquakes close to $15 billion in 2023. Over the past two centuries, 37 U.S. States have experienced an earthquake exceeding a magnitude of 5, and 50 percent of States have a significant potential for future damaging shaking; these statistics speak to the need for nationwide interest and investment in earthquake hazard characterization and risk reduction. Authorized under the Earthquake Hazards Reduction Authorization Act, the U.S. Geological Survey (USGS) Earthquake Hazards Program (EHP) provides the scientific information, situational awareness, and knowledge necessary to reduce deaths, injuries, and economic losses from earthquakes and earthquake-induced tsunamis, landslides, and soil liquefaction. The EHP supports activities in three focused topical areas: (1) earthquake monitoring, (2) hazard assessment, and (3) applied research, using the results of each—and the coordination among them—to further support risk translation and communication in regions at risk nationwide. For earthquake monitoring, the Advanced National Seismic System (ANSS), a cooperative effort of USGS networks, university partner regional seismic networks, and real-time geodetic networks, collects and analyzes data on earthquakes; issues timely, reliable notifications of their occurrence and impacts; and provides data for earthquake research, hazard, and risk assessment as a foundation for building an earthquake-resilient Nation. The USGS-operated ShakeAlert Earthquake Early Warning system is a recent addition to EHP’s ANSS infrastructure. In the realm of earthquake hazard assessment, the EHP contributes to earthquake risk mitigation strategies by developing the National Seismic Hazard Model and maps, and other related products, that describe the likelihood and potential effects of earthquakes nationwide, especially in the urban areas of highest risk. The EHP also conducts research on the causes, characteristics, and effects of earthquakes and prioritizes work that directly increases the accuracy and precision of earthquake hazards assessments, earthquake forecasts, and earthquake monitoring and situational-awareness products and that supports the Nation’s earthquake mitigation practices. Bridging the EHP’s efforts across research, hazard assessments, and earthquake monitoring is a broad and comprehensive collection of earthquake information products, including the National Seismic Hazard Model, ShakeAlert, and other products describing impact, such as ShakeMap and PAGER (Prompt Assessment of Global Earthquakes for Response), which have been developed and integrated into EHP’s real-time monitoring systems. EHP funds external partners to carry out many important collaborative activities through an active external grants program—one of the largest in the USGS—and through cooperative agreements with other partners such as the university-operated regional seismic networks, funded as part of the ANSS. To continue its support of earthquake hazard characterization and risk reduction, the EHP aims to strengthen its foundational products and practices while positioning itself to respond to the evolving needs of the Nation and follow best practices of the scientific community. This document describes a strategy for the program to ensure it can meet these demands. The foundational priorities outlined in this strategy represent those activities that remain critical to the core functionality of the program and those that can be supported under current fiscal year 2024-level appropriations. Priorities described as aspirational are important for future growth, and to maintain the program’s position as a leading global resource in earthquake science, but would require increases in appropriated funding to be fully realized. Across the program’s portfolio of activities, several major themes have been identified as the most critical activities to advance EHP science over the coming decade. Together, these activities provide the framework necessary to integrate critical hazard characterization and risk reduction activities across the program. They provide the structure for research to advance the understanding of where, when, and why earthquakes occur and how we can use improved knowledge to drive short-term and actionable forecasts of seismic activity. They expand the usefulness of critical earthquake products and advance the sophistication of those products to keep pace with the rapidly evolving needs of an ever-expanding user base while maintaining the position of the USGS as a global leader in earthquake science. Focus on system-level science. Establish an automated earthquake-processing pipeline. Enhance the accuracy and reliability of the ShakeAlert Earthquake Early Warning system and plan for extension to other regions. Implement time-dependent earthquake forecasting. Develop physically realistic models. Expand computational capacity. This science strategy is organized into three primary sections. The first section provides an overview of the EHP and its budget, governance, and program council. Readers familiar with the program may wish to focus on the second section, which describes the core of the science strategy, including priorities across each of the EHP’s major program activities in monitoring, hazard assessment, and targeted research. The third section outlines science priorities that cut across program activities, including those involving collaborations external to the EHP.

American Samoa, Guam, Northern Marianas Islands, U↗
USGS1954

Stripping-coal deposits on lower Lignite Creek, Nenana coal field, Alaska

Stripping-coal reserves in an area of about 9.4 square miles extending from the Nenana River about 6 miles up the valley of Lignite Creek are estimated to amount to about 95, 000, 000 tons. The stripping-coal reserves are located in the lower and middle members of the Tertiary coal-bearing formation. Five continuous beds in the middle member range in thickness from 5 to 30 feet, and a discontinuous bed at the base of the lower member is about 60 feet thick. Analyses of outcrop samples, as received at the laboratory, show a heating content of 7,500--8,200 Btu, an ash content of 6 to 14 percent, and a moisture content of 25 percent. The reserve estimate is based on a maximum thickness of overburden of 200 feet. Coal below the level of Lignite Creek or its major tributaries was not considered as it was assumed that stripping would be by hydraulic methods. Uncertainties regarding the position of the coal outcrops and the extent of burning of the coal beds are the basis for a recommendation that, where possible, the stripping reserves be tested by drilling. Overburden consists largely of weakly consolidated sandstone and includes some coarse gravel and a few boulders 20 feet or more in diameter. Water for hydraulic mining can be obtained from the Nenana River. Lignite Creek does not appear to be a dependable source. Disposal of debris may affect the channel of the Nenana River causing damage to railroads and structures. Landslides are common in the valley of Lignite Creek and will affect mining operations and transportation routes.

Circular↗
USGS1967

Effects of the Truckee, California, earthquake of September 12, 1966

The Truckee, Calif., earthquake of September 12, 1966, had a magnitude of 5.4 on the Richter scale, as reported by the U.S. Coast and Geodetic Survey. It was felt over an area extending from San Francisco eastward to Salt Lake City and from Bakersfield northward beyond Chico, Calif. Ground breakage due to seismic shaking occurred in unconsolidated alluvium along a zone about 10 miles long that trends about N. 30° E. and extends from a point west of Prosser Reservoir, 4 miles northeast of Truckee, to Hoke Valley. The concentration of ground breakage along this zone suggests that it may be related to a subsurface northeastward-trending fault rather than to buried extensions of the northwestward-trending faults that dominate the regional geologic structure. Other effects of the earthquake include the following: (1) Damage to Prosser and Boca Dams, (2) minor damage to several bridges on Interstate Highway 80, (3) several earthquake-generated slumps or landslides on Interstate Highway 80 between Boca Dam and the California-Nevada boundary, (4) damage to the caretaker's house at Boca Dam and a lumber shed at Loyalton, (5) damage by falling rocks to the Farad powerhouse, to the wooden flume which supplies water to the powerhouse, and to the Southern Pacific Lines in Truckee Canyon, (6) minor damage to water wells and water distribution systems, particularly at Truckee, and (7) rejuvenation of springs throughout the Truckee-Russel Valley area.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS1970

Urban sprawl and flooding in southern California

The floods of January 1969 in south-coastal California provide a timely example of the effect of urban sprawl on flood damage. Despite recordbreaking, or near recordbreaking, stream discharges, damage was minimal in the older developed areas that are protected against inundation and debris damage by carefully planned flood-control facilities, including debris basins and flood-conveyance channels. By contrast, heavy damage occurred in areas of more recent urban sprawl, where the hazards of inundation and debris or landslide damage have not been taken into consideration, and where the improvement and development of drainage or flood-control facilities have not kept pace with expanding urbanization.

Circular↗
USGS1973

Effects of the May 5-6, 1973, storm in the Greater Denver area, Colorado

Rain began falling on the Greater Denver area the evening of Saturday, May 5, 1973, and continued through most of Sunday, May 6. Below about 7,000 feet altitude, the precipitation was mostly rain; above that altitude, it was mostly snow. Although the rate of fall was moderate, at least 4 inches of rain or as much as 4 feet of snow accumulated in some places. Sustained precipitation falling at a moderate rate thoroughly saturated the ground and by midday Sunday sent most of the smaller streams into flood stage. The South Platte River and its major tributaries began to flood by late Sunday evening and early Monday morning. Geologic and hydrologic processes activated by the May 5-6 storm caused extensive damage to lands and to manmade structures in the Greater Denver area. Damage was generally most intense in areas where man had modified the landscape--by channel constrictions, paving, stripping of vegetation and topsoil, and oversteepening of hillslopes. Roads, bridges, culverts, dams, canals, and the like were damaged or destroyed by erosion and sedimentation. Streambanks and structures along them were scoured. Thousands of acres of croplands, pasture, and developed urban lands were coated with mud and sand. Flooding was intensified by inadequate storm sewers, blocked drains, and obstructed drainage courses. Saturation of hillslopes along the Front Range caused rockfalls, landslides, and mudflows as far west as Berthoud Pass. Greater attention to geologic conditions in land-use planning, design, and construction would minimize storm damage in the future.

Circular↗
USGS1974

Seismic hazards and land-use planning

Basic earth-science data are necessary for a realistic assessment of seismic hazards and as a basis for limiting corrective land-use controls only to those areas of greatest hazard. For example, the location, character, and amount of likely displacement and activity of surface faulting can be predicted if detailed geologic maps and seismic data are available and are augmented by field studies at critical localities. Because few structures can withstand displacement of their foundations, they should be located off active fault traces, the distance varying with the character of faulting, the certainty with which fault traces are known, and the importance of the structure. Recreational activities and other nonoccupancy land uses should be considered for fault zone areas where land is under pressure for development; elsewhere, such areas should remain as open space. Two methods of predicting ground shaking effects have applications to land-use decisions: (1) Relative earthquake effects can be related to firmness of the ground and can be used in a gross way to allocate population density in the absence of more sophisticated analyses; and (2) intensity maps, based on, (a) damage from former earthquakes, or (b) a qualitative analyses of geologic units added to a design earthquake, can be helpful both for general and specific plans. Theoretical models are used with caution to predict ground motion for critical structures to be located at specific sites with unique foundation conditions. Fully adequate methods of assessing possible shaking remain to be developed. Where land-use decisions do not reflect likely ground shaking effects, stringent building codes are needed, particularly for important structures. Ground failure (landsliding, ground cracking and lurching, differential settlement, sand boils, and subsidence) commonly results from liquefaction, loss of soil strength, or compaction. Areas suspected of being most likely to fail should not be developed unless detailed site studies can demonstrate the hazard does not exist or can be overcome. Various methods can be used to reduce the high, long-term public costs that follow development of unstable ground. However, areas subject to tectonic deformation generally cannot be predicted nor can effects of such deformation be minimized. Large water waves, such as produced by tsunamis, seiches, and dam failure or overtopping, can be anticipated in many places. Their effects can be lessened by land-use regulations similar to flood-plain zoning, restrictions on location of critical structures, and appropriate warning systems. Many local, state, and federal government agencies, universities, and private consultants may be able to assist planners by advising them of pertinent data and where those data can be obtained. Interpretation of the data for an evaluation of seismic risk commonly requires a team of planners, geologists, and soil and structural engineers.

Circular↗
USGS2025

Bathymetric and acoustic-backscatter mapping of Lake Sammamish, Washington, during USGS field activity 2021-656-FA

In 2021, scientists from the U.S. Geological Survey (USGS) acquired bathymetric and acoustic-backscatter data within Lake Sammamish, Washington. Mapping was completed to find evidence of past earthquakes such as underwater landslides and is part of a larger USGS project to understand the overall geologic hazards history of the Cascadia Margin region. The survey was conducted using the USGS research vessel Parke Snavely outfitted with an interferometric sidescan-sonar system for swath mapping. Three estimates of bathymetric uncertainty were calculated from the post-processed bathymetric data. This report provides a summary of the mapping mission.

Washington↗
USGS2017

An open repository of earthquake-triggered ground-failure inventories

Earthquake-triggered ground failure, such as landsliding and liquefaction, can contribute significantly to losses, but our current ability to accurately include them in earthquake-hazard analyses is limited. The development of robust and widely applicable models requires access to numerous inventories of ground failures triggered by earthquakes that span a broad range of terrains, shaking characteristics, and climates. We present an openly accessible, centralized earthquake-triggered groundfailure inventory repository in the form of a ScienceBase Community to provide open access to these data with the goal of accelerating research progress. The ScienceBase Community hosts digital inventories created by both U.S. Geological Survey (USGS) and non-USGS authors. We present the original digital inventory files (when available) as well as an integrated database with uniform attributes. We also summarize the mapping methodology and level of completeness as reported by the original author(s) for each inventory. This document describes the steps taken to collect, process, and compile the inventories and the process for adding additional ground-failure inventories to the ScienceBase Community in the future.

Data Series↗
USGS2005

Geologic map of the Wenatchee 1:100,000 quadrangle, central Washington: A digital database

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Wenatchee 1:100,000 Quadrangle, Central Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Washington↗
USGS2006

Database for the geologic map of the Chelan 30-minute by 60-minute quadrangle, Washington (I-1661)

This digital map database has been prepared by R. W. Tabor from the published Geologic map of the Chelan 30-Minute Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Washington↗
USGS2006

Database for the geologic map of the Snoqualmie Pass 30-minute by 60-minute quadrangle, Washington (I-2538)

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Snoqualmie Pass 30' X 60' Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Data Series↗
USGS2006

Database for the geologic map of the Sauk River 30-minute by 60-minute quadrangle, Washington (I-2592)

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Sauk River 30- by 60 Minute Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled most Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Data Series↗
USGS2006

Database for the geologic map of the Mount Baker 30-minute by 60-minute quadrangle, Washington (I-2660)

This digital map database has been prepared by R.W. Tabor from the published Geologic map of the Mount Baker 30- by 60-Minute Quadrangle, Washington. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the geology at 1:100,000. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. This database depicts the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Washington↗
USGS2006

Database for the Geologic Map of the Skykomish River 30-Minute by 60-Minute Quadrangle, Washington (I-1963)

This digital map database has been prepared from the published geologic map of the Skykomish River 30- by 60-minute quadrangle by the senior author. Together with the accompanying text files as PDF, it provides information on the geologic structure and stratigraphy of the area covered. The database delineates map units that are identified by general age and lithology following the stratigraphic nomenclature of the U.S. Geological Survey. The authors mapped most of the bedrock geology at 1:100,000 scale, but compiled Quaternary units at 1:24,000 scale. The Quaternary contacts and structural data have been much simplified for the 1:100,000-scale map and database. The spatial resolution (scale) of the database is 1:100,000 or smaller. From the eastern-most edges of suburban Seattle, the Skykomish River quadrangle stretches east across the low rolling hills and broad river valleys of the Puget Lowland, across the forested foothills of the North Cascades, and across high meadowlands to the bare rock peaks of the Cascade crest. The Straight Creek Fault, a major Pacific Northwest structure which almost bisects the quadrangle, mostly separates unmetamorphosed and low-grade metamorphic Paleozoic and Mesozoic oceanic rocks on the west from medium- to high-grade metamorphic rocks on the east. Within the quadrangle the lower grade rocks are mostly Mesozoic melange units. To the east, the higher-grade terrane is mostly the Chiwaukum Schist and related gneisses of the Nason terrane and invading mid-Cretaceous stitching plutons. The Early Cretaceous Easton Metamorphic Suite crops out on both sides of the Straight Creek fault and records it's dextral displacement. On the south margin of the quadrangle, the fault separates the lower Eocene Swauk Formation on the east from the upper Eocene and Oligocene(?) Naches Formation and, farther north, its correlative Barlow Pass Volcanics the west. Stratigraphically equivalent rocks of the Puget Group crop out farther to the west. Rocks of the Cascade magmatic arc are mostly represented by Miocene and Oligocene plutons, including the Grotto, Snoqualmie, and Index batholiths. Alpine river valleys in the quadrangle record multiple advances and retreats of alpine glaciers. Multiple advances of the Cordilleran ice sheet, originating in the mountains of British Columbia, Canada, have left an even more complex sequence of outwash and till along the western mountain front, up these same alpine river valleys, and over the Puget Lowland. This database and accompanying plot files depict the distribution of geologic materials and structures at a regional (1:100,000) scale. The report is intended to provide geologic information for the regional study of materials properties, earthquake shaking, landslide potential, mineral hazards, seismic velocity, and earthquake faults. In addition, the report contains new information and interpretations about the regional geologic history and framework. However, the regional scale of this report does not provide sufficient detail for site development purposes.

Data Series↗
USGS2009

Surface rupture map of the 2002 M7.9 Denali fault earthquake, Alaska: Digital data

The November 3, 2002, Mw7.9 Denali Fault earthquake produced about 340 km of surface rupture along the Susitna Glacier Thrust Fault and the right-lateral, strike-slip Denali and Totschunda Faults. Digital photogrammetric methods were primarily used to create a 1:500-scale, three-dimensional surface rupture map, and 1:6,000-scale aerial photographs were used for three-dimensional digitization in ESRI's ArcMap GIS software, using Leica's StereoAnalyst plug in. Points were digitized 4.3 m apart, on average, for the entire surface rupture. Earthquake-induced landslides, sackungen, and unruptured Holocene fault scarps on the eastern Denali Fault were also digitized where they lay within the limits of air photo coverage. This digital three-dimensional fault-trace map is superior to traditional maps in terms of relative and absolute accuracy, completeness, and detail and is used as a basis for three-dimensional visualization. Field work complements the air photo observations in locations of dense vegetation, on bedrock, or in areas where the surface trace is weakly developed. Seventeen km of the fault trace, which broke through glacier ice, were not digitized in detail due to time constraints, and air photos missed another 10 km of fault rupture through the upper Black Rapids Glacier, so that was not mapped in detail either.

Alaska↗
USGS2002

Surficial geologic maps along the riparian zone of the Animas River and its headwater tributaries, Silverton to Durango, Colorado, with upper Animas River watershed gradient profiles

This product consists of Adobe Acrobat .PDF format documents for 10 surficial geologic strip maps along the Animas River watershed from its major headwater tributaries, south to Durango, Colorado. The Animas River originates in the San Juan Mountains north of the historic mining town of Silverton, Colorado. The surficial geologic maps identify surficial deposits, such as flood-plain and terrace gravels, alluvial fans, glacial till, talus, colluvium, landslides, and bogs. Sixteen primary units were mapped that included human-related deposits and structures, eight alluvial, four colluvial, one glacial, travertine deposits, and undifferentiated bedrock. Each of the surficial geologic strip maps has .PDF links to surficial geology photographs, which enable the user to take a virtual tour of these deposits. Geochemical data collected from mapped surficial deposits that pre- and postdate mining activity have aided in determining the geochemical baseline in the watershed. Several photographs with their corresponding geochemical baseline profiles are accessible through .PDF links from several of the maps. A single coverage for all surficial deposits mapped is included as an ArcInfo shape file as an Arc Export format .e00 file. A gradient map for major headwater tributary streams to the Animas River is also included. The gradient map has stream segments that are color-coded based on relative variations in slope and .PDF format links to each stream gradient profile. Stream gradients were derived from U.S. Geological Survey 10-m digital elevation model data. This project was accomplished in support of the U.S. Geological Survey's Abandoned Mine Lands Initiative in the San Juan Mountains, Colorado.

Colorado↗
USGS2013

Historical rock falls in Yosemite National Park, California (1857-2011)

Inventories of rock falls and other types of landslides are valuable tools for improving understanding of these events. For example, detailed information on rock falls is critical for identifying mechanisms that trigger rock falls, for quantifying the susceptibility of different cliffs to rock falls, and for developing magnitude-frequency relations. Further, inventories can assist in quantifying the relative hazard and risk posed by these events over both short and long time scales. This report describes and presents the accompanying rock fall inventory database for Yosemite National Park, California. The inventory database documents 925 events spanning the period 1857–2011. Rock falls, rock slides, and other forms of slope movement represent a serious natural hazard in Yosemite National Park. Rock-fall hazard and risk are particularly relevant in Yosemite Valley, where glacially steepened granitic cliffs approach 1 km in height and where the majority of the approximately 4 million yearly visitors to the park congregate. In addition to damaging roads, trails, and other facilities, rock falls and other slope movement events have killed 15 people and injured at least 85 people in the park since the first documented rock fall in 1857. The accompanying report describes each of the organizational categories in the database, including event location, type of slope movement, date, volume, relative size, probable trigger, impact to humans, narrative description, references, and environmental conditions. The inventory database itself is contained in a Microsoft Excel spreadsheet (Yosemite_rock_fall_database_1857-2011.xlsx). Narrative descriptions of events are contained in the database, but are also provided in a more readable Adobe portable document format (pdf) file (Yosemite_rock_fall_database_narratives_1857-2011.pdf) available for download separate from the database.

California↗