USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research - Atmospheres”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources
USGS2012

Chemistry of rock-forming minerals of the Cretaceous-Paleocene batholith in southwestern Japan and implications for magma genesis

Petrographic descriptions and electron microprobe analyses of minerals are presented for 35 specimens from seven suites chosen to examine the transition from magnetite series to ilmenite series granitoids along two transects across the Cretaceous-Paleocene Inner Zone batholith of southwestern Japan. Regularities in chemical compositions of amphiboles, biotites, and feldspars suggest that fundamentally similar processes produced the magmas that formed the two series. Constant or decreasing Fe/(Fe+Mg) for biotites and amphiboles with increasing host rock silica content, coupled with the absence of early formed magnetite and sphene, suggest that magnetite series rocks may have become oxidized during crystallization near the level of intrusion, through the processes of second boiling and differential loss of hydrogen. For the Daito-Yokota, magnetite series suite, Fe/(Fe+Mg) for biotites decreased from 0.48 to 0.37 as SiO 2 content of the host rock increased from 55.3 to 75.5 wt %; for an ilmenite series suite from the Takanawa Peninsula, Fe/(Fe+Mg) for biotites increased from 0.51 to 0.77 with an increase in host rock SiO 2 from 53.4 to 75.5. Detailed consideration of amphibole chemistry shows predominance of edenitic and tschermakitic substitution schemes as well as coupling between substitutions of Ti in octahedral sites and Al IV . Interrelations between amphibole and biotite chemistry show that Fe/(Fe+Mg) and Mn contents can be interpreted in terms of equilibration, whereas Ti content cannot. The chemistry of chlorites correlates well with that of biotites; primary and secondary muscovites are distinct in composition. Plagioclase in all studied suites shows igneous zoning appropriate to host rock composition; perthitic alkali feldspars in all samples have lost albite component, and temperatures based on the two-feldspar geothermometer are low. The biotite-apatite geothermometer is also inoperative for this group of samples because fully fluorinated apatites typically occur in biotites of modest F content. Whereas magnetites have reequilibrated, analyses of ilmenites for the representative Daito-Yokota and Takanawa suites corroborate biotite compositional data and suggest that f O2 probably differed by 2 to 3 orders of magnitude during crystallization of silica-rich magnetite and ilmenite series granites. Whole-rock chemistry supports mineral chemistry in suggesting that the studied granitoids have crystallized from magmas generated in a lower crustal environment in which mantle-derived magmas partially melted source materials with igneous characteristics.

Journal of Geophysical Research Solid Earth↗
USGS2012

Petrology and geochronology of metamorphosed volcanic rocks and a middle Cretaceous volcanic neck in the east-central Sierra Nevada, California

Metamorphosed Mesozoic volcanic rocks from the east-central Sierra Nevada range in composition from basalt to rhyolite and have ages, based on whole rock Rb-Sr and U-Pb zircon dating, of about 237–224, 185, 163, 134, and 100 m.y. The major plutons of the batholith in this area are of Triassic (215–200 m.y.) and Cretaceous (94–80 m.y.) ages. Initial 87 Sr/ 86 Sr values for the metamorphosed volcanic rocks of the area are in the range from 0.7042 to 0.7058 and are generally different from the values for the surrounding batholithic rocks (0.7056–0.7066). A circular, zoned granitic pluton, with an outcrop area of 2.5 km 2 , similar in appearance to a ring dike complex, was apparently a conduit for some or possibly all of the middle-Cretaceous metamorphosed volcanic rocks exposed about 5 km to the south in the western part of the Ritter Range. Samples from the metamorphosed volcanic rocks and the pluton yield a Rb-Sr whole rock isochron age of 99.9 ± 2.2 m.y. with an initial 87 Sr/ 86 Sr of 0.7048 ± 0.0001. Major element variation diagrams of the pluton and volcanic rocks define coincident compositional trends. The pluton, intruded into Early Jurassic metamorphosed volcanic rocks (Rb-Sr whole rock isochron age of 185 ± 6 m.y., initial 87 / 86 Sr = 0.70474 ± 0.00009), is composed of a central body of granite that is intruded into and almost completely surrounded by a crescent-shaped outer rim of quartz monzodiorite. Contact relations between the granitic rocks, intrusive in some places and completely gradational at other places, indicate that the quartz monzodiorite was not completely crystallized prior to the intrusion of the granite. Modal minerology within the pluton is also consistent with this inferred crystallization history. The granitic rock textures are cataclastic, characterized by a groundmass of feldspar and quartz that surrounds larger grains of feldspar, hornblende, and biotite. Widely spaced aplite dikes from the granite intrude the quartz monzodiorite along the contact between the granitic rocks. The aplite dikes and interstitial alkali feldspar associated with myrmekite in the pluton, being undeformed, indicate crystallization of a small amount of silicate liquid after cataclasis. Aplite compositions suggest a minimum crystallization pressure of 0.5 kb (1–2 km); this depth is consistent with crystallization near the base of a large stratovolcano. The pluton is characterized by steep, linear features, defined by mineral clots and inclusions, that probably formed during the upward movement of the nearly crystallized magma in the volcanic conduit. The ages of volcanic events relative to the ages of the major intrusive epochs and the major element and isotopic compositions of the volcanic rocks relative to the major plutons indicate that the volcanic rocks are not simply or directly related to the major plutons in the Sierra Nevada.

Journal of Geophysical Research Solid Earth↗
USGS2012

Petrogenesis of garnet two-mica granites in the Ruby Mountains, Nevada

Garnet-two-mica granites of Jurassic (160 ± 3 m.y.) and Cretaceous (83 ± 1.3 m.y.) ages intrude amphibolite facies metasedimentary rocks of Precambrian age and lower Paleozoic sedimentary rocks in the northern part of the Ruby Mountains, Nevada. High initial 87 Sr/ 86 Sr and high values of δ 18 O for minerals suggest a dominantly sedimentary source for the magmas. Total rare-earth contents are low and less fractionated (Ce N /Yb N = 10) than granitic rocks of similar composition in the Sierra Nevada and show a negative Eu anomaly (Eu/Eu* = 0.57). These data are consistent with melting in the stability field of plagioclase with little contribution to the melt from refractory minerals such as zircon, sphene, and apatite. Minor euhedral garnets are manganese-rich and magnesium-poor (al 60 sp 34 py 3.6 gr 2.8 ) compared to garnet (al 79 sp 6 py 13 gr 2 ) in the intruded metamorphic rocks and show an increase in manganese and a decrease in calcium in the outer few microns. Fractionation of magnesium-iron between garnet and biotite, and of sodium-potassium between K-feldspar and plagioclase in the granites suggest submagmatic equilibration temperatures, in the range of 365° to 505°C, whereas oxygen isotope equilibration temperatures for two granites are higher at 480° and 570°C. The compositions of the granites plot near minimum melting compositions in the water-saturated quartz-albite-orthoclase system. Comparison of muscovite plus quartz stability, the water-saturated granite solidus, and experimental garnet-melt equilibria suggests pressures of crystallization no lower than about 3.5 kbar. This pressure is compatible with that estimated from garnet-plagioclase-sillimanite-quartz equilibria for the intruded metasedimentary rocks.

Nevada↗
USGS2012

Two-mica granites of northeastern Nevada

The field settings are described and analytical data are presented for six two-mica granites from north-eastern Nevada. High δ 18 O and 87 Sr/ 86 Sr values indicate that all are S-type granites, derived from continental crust. The major element chemistry and accessory mineral contents of these rocks also are characteristic of S-type granites. Chemical, X ray, and other data are presented for the micas recovered from these granites. The muscovites are notably high in Fe 2 O 3 , FeO, and MgO. Except for one hydrobiotite, each of the biotites has an MgO content near 6.0 weight percent. Two different types of two-mica granites are recognized in the area of this study. One type is distinguished by the presence of many biotite euhedra within muscovite phenocrysts and by an unusual suite of accessory minerals completely devoid of opaque oxides. This type probably resulted from anatexis of late Precambrian argillites under conditions of relatively low oxygen fugacity, along a line that roughly coincides with the westward disappearance of continental basement. In the other textural type of two-mica granite the micas are equigranular and there is a greater variety of accessory minerals. The magmatic evolution of this type also appears to reflect the influence of late Precambrian argillites; there may be age differences between the two types of two-mica granites.

Journal of Geophysical Research Solid Earth↗
USGS2012

A stochastic fault model. 2. Time-dependent case

A random model of fault motion in an earthquake is formulated by assuming that the slip velocity is a random function of position and time truncated at zero, so that it does not have negative values. This random function is chosen to be self-affine; that is, on change of length scale, the function is multiplied by a scale factor but is otherwise unchanged statistically. A snapshot of slip velocity at a given time resembles a cluster of islands with rough topography; the final slip function is a smoother island or cluster of islands. In the Fourier transform domain, shear traction on the fault equals the slip velocity times an impedance function. The fact that this impedance function has a pole at zero frequency implies that traction and slip velocity cannot have the same spectral dependence in space and time. To describe stress fluctuations of the order of 100 bars when smoothed over a length of kilometers and of the order of kilobars at the grain size, shear traction must have a one-dimensional power spectrum is space proportional to the reciprocal wave number. Then the one-dimensional power spectrum for the slip velocity is proportional to the reciprocal wave number squared and for slip to its cube. If slip velocity has the same power law spectrum in time as in space, then the spectrum of ground acceleration will be flat (white noise) both on the fault and in the far field.

Journal of Geophysical Research Solid Earth↗
USGS2012

Geodetic measurement of crustal deformation on the San Andreas, Hayward, and Calaveras faults near San Francisco, California

Analysis of a geodetic network of 115 lines crossing the San Andreas, Hayward, and Calaveras faults in the vicinity of San Francisco Bay and measured repeatedly between 1970 and 1980 has revealed details about the accommodation of relative plate motion in this area. The most striking result is that the deformation is not uniformly distributed across the area. In the east bay, along the Hayward and Calaveras faults, all motion appears to take place as slip directly on the fault, with no accumulation of strain in the adjacent crust. On both the Calaveras and the Hayward faults the rate obtained for the 1970 to 1980 period agrees with geologic rates spanning a few million years and with creep rates spanning a few decades. The Hayward fault slip rate is 7 ± 1 mm/yr. The Calaveras fault slip rate is 7 ± 1 mm/yr, with perhaps half of this slip distributed across a zone a few kilometers wide, probably as inelastic deformation of weak near‐surface material. The absence of strain accumulation in the east bay is surprising since the Hayward and Calaveras faults have been the site of large earthquakes in the past. A block located east of the Calaveras fault and south of the Las Positas fault has been rotating clockwise at a rate of 0.3 ± 0.1 μrad/yr with very little internal deformation. Along the San Francisco peninsula no detectable slip occurs (less than 1.5 mm/yr) at the surface, but appreciable strain is accumulating. Near fault shear strain rates are 0.6 ± 0.1 μstrain/yr (engineering) with direction N47°W ± 9. The slip rate near the San Andreas fault is 12.2 ± 3.9 mm/yr distributed across a broad zone. The relative motion across the whole region during the period 1970–1980 is 32.1 ± 7.4 mm/yr.

California↗
USGS2012

Application of wave field continuation to the inversion of refraction data

Three examples of the inversion of refraction data by downward continuation illustrate the applicability of the method to field data. The first example is a refraction profile from the Mojave Desert, California. These data are spatially aliased and contain clear evidence of lateral inhomogeneity. The inversion in this case produces a broken image in the slowness‐depth domain due to the lateral inhomogeneity, but a useful average velocity model is still obtained. The second example is a shallow marine reflection profile. Here, the truncation effects due to the finite horizontal aperture of the recording cable produce artifacts in the slowness‐depth domain. The velocity model is, however, distinct from these artifacts, and the presence of strong precritical reflections aids in the inversion. The third example is another shallow marine reflection profile. The inversion of these data illustrate the utilization of constraints provided by multiples as well as primary arrivals.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Geomagnetic local and regional harmonic analyses

Procedures are developed for using rectangular and cylindrical harmonic analyses in local and regional areas. Both the linear least squares analysis, applicable when component data are available, and the nonlinear least squares analysis, applicable when only total field data are available, are treated. When component data are available, it is advantageous to work with residual fields obtained by subtracting components derived from a harmonic potential from the observed components. When only total field intensity data are available, they must be used directly. Residual values cannot be used. Cylindrical harmonic analyses are indicated when fields tend toward cylindrical symmetry; otherwise, rectangular harmonic analyses will be more advantageous. Examples illustrating each type of analysis are given.

Journal of Geophysical Research Solid Earth↗
USGS2012

The Yellowstone-Snake River Plain seismic profiling experiment: Crustal structure of the Eastern Snake River Plain

Seismic refraction profiles recorded along the eastern Snake River Plain (ESRP) in southeastern Idaho during the 1978 Yellowstone-Snake River Plain cooperative seismic profiling experiment are interpreted to infer the crustal velocity and attenuation (Q-1) structure of the ESRP. Travel-time and synthetic seismogram modeling of a 250 km reversed refraction profile as well as a 100 km detailed profile indicate that the crust of the ESRP is highly anomalous. Approximately 3 to 6 km of volcanic rocks (with some interbedded sediments) overlie an upper-crustal layer (compressional velocity ≅6.1 km/s) which thins southwestward along the ESRP from a thickness of 10 km near Island Park Caldera to 2 to 3 km beneath the central and southwestern portions of the ESRP. An intermediate-velocity (≅6.5 km/s) layer extends from ≅10 to ≅20 km depth. A thick (≅22 km) lower crust of compressional velocity 6.8 km/s, a total crustal thickness of ≅42 km, and a P n velocity of ≅7.9 km/s is observed in the ESRP, similar to the western Snake River Plain and the Rocky Mountains Provinces. High attenuation is evident on the amplitude corrected seismic data due to low-Q values in the volcanic rocks (Q p = 20 to 200) and throughout the crust (Q p = 160 to 300). Based on these characteristics of the crustal structure and volcanic-age progression data, it is suggested that the ESRP has resulted from an intensive period of intrusion of mantle-derived basaltic magma into the upper crust generating explosive silicic volcanism and associated regional uplift and caldera collapse. This activity began about 15 m.y. ago in southwestern Idaho and has migrated northeast to its present position at Yellowstone. Subsequent cooling of the intruded upper crust results in the 6.5 km/s velocity intermediate layer. Crustal subsidence and periodic basaltic volcanism as represented by the ESRP complete the sequence of crustal evolution.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Terranes and suture zones in east central Alaska

East central Alaska, with its 17 terranes, forms a part of the mosaic of allochthonous terranes that join the North American and Siberian plates. These terranes range from continental and continental margin, such as the Tatonduk with its thick well-bedded succession of marine shelf rocks, to seamount, arc, and ocean floor terranes. The Yukon crystalline terrane, the largest described here, is a composite of at least four subterranes juxtaposed across the Tintina fault with the Tatonduk terrane, a northwestern extension of the North American plate in Alaska. Inboard of the Yukon crystalline terrane are packets of closely appressed microterranes separated from the Tatonduk and other terranes belonging to North America by major suture zones. These microterranes lie between North America and the mosaic of accretionary terranes that form the more southerly part of Alaska. The most obviously allochthonous microterranes within the suture zones are the Woodchopper Canyon, an Early Devonian basaltic seamount, and the White Mountains, an Ordovician volcanic arc terrane capped by Silurian and Devonian carbonate bank deposits. The nearest counterpart of these terranes is the Alexander terrane in southeastern Alaska. The Tintina fault of Mesozoic and Cenozoic age, like the Denali fault, primarily follows old suture zones that separate terranes. Strike slip faulting developed after collision in places where further convergence was oblique to the terrane margins. Where terranes met head-on, their leading edges lie along a multiple set of high-angle faults that outline microterranes in accretion zones.

Alaska↗
USGS2012

Post 12 m.y. rotation of southwest Washington

Paleomagnetic field directions from the basalt of Pack Sack Lookout are compared to those from the Pomona Member of the Saddle Mountains Basalt of the Columbia River Basalt Group. The Pomona crops out over a wide region on the Columbia Plateau east of the Cascade Range, and the basalt of Pack Sack Lookout crops out well to the west of the Cascades about 30 to 60 km east of the Washington coast. Our paleomagnetic results support existing geologic and geochemical evidence that both these units are part of a single 12‐m.y.‐old flow that erupted in western Idaho and flowed to the Washington coast. The magnetic data further indicate that southwest Washington has undergone clockwise rotation with respect to the Columbia Plateau and stable North America. The data suggest that both a large‐scale regional rotation of ∼16° and locally complex small‐scale rotations exist, the two being present to different degrees in the eastern and western regions of southwest Washington. The Cascade Range appears to coincide with the tectonic boundary, separating rotated and unrotated regions of Washington state. Rotation of southwest Washington appears to have been associated with the rotation of large pieces of western Oregon and southern Washington, possibly as a result of either a ridge‐push force from the Basin and Range province or shear along the Pacific‐North America plate boundary.

Washington↗
USGS2012

The emplacement of ophiolites by collision

Ophiolites, recognized in most of the world's orogenic belts, are generally interpreted to be oceanic crust and upper mantle (lithosphere) fragments that have been incorporated into continental margins at consuming plate boundaries. We suggest that the mechanism for ophiolite emplacement is the same in both the Alpine and Andean-type orogenes. In both geological settings, obduction of oceanic lithosphere onto the continental lithosphere is caused by the convergence of light, buoyant bodies such as oceanic plateaus, continental slivers, island arcs, or old hot spot traces. For example, the Troodos ophiolite complex, previously interpreted by some workers as resulting from continental collision, may have been emplaced by the collision of Cyprus with the Eratosthenes Plateau embedded in the oceanic eastern Mediterranean crust. On the other hand, the Upper Jurassic Coast Range Ophiolites of California, previously interpreted as resulting from typical oceanic subduction, may be the result of a continuous injection of thick nonsubductable packages of light, continentally derived sedimentary rocks, seamounts, and plateaus into the subduction zones. Many other ophiolite complexes may be similarly related to accreted terranes.

Journal of Geophysical Research↗
USGS2012

Source parameters of the 1980 Mammoth Lakes, California, earthquake sequence

From the more than 1500 Mammoth Lakes earthquakes recorded on three-component digital seismographs (Spudich et al., 1981), 150 were used in an analysis of the locations, mechanism, and source parameters. A composite fault plane solution of nine earthquakes 3.9 ≤ M ≤ 5.1 defines a right-lateral strike slip mechanism on a steeply dipping nearly east-west plane striking S75°E or left-lateral strike slip on a nearly north-south plane striking N10°E. Vertical cross sections of well-located aftershocks indicate possibly three east-west planes that coincide with the locations of the four largest earthquakes with M L ≥ 6.0. Using the spectral analysis of S waves (Brune, 1970), source parameters for 67 earthquakes were determined. Forty-eight had magnitudes greater than or equal to 3.0. Seismic moments ranged from 9.20×10 18 dyn cm to 2.33×10 24 dyn cm. Earthquakes with seismic moment greater than about 1.0×10 21 dyn cm had nearly constant stress drops (≃ 50 bars); earthquakes with seismic moment less than about 1.0×10 21 dyn cm had stress drops that apparently decrease as seismic moment decreases.

California↗
USGS2012

Uranium-lead isotopic ages from the Sierra Nevada Batholith, California

This study provides new information on the timing and distribution of Mesozoic magmatic events in the Sierra Nevada batholithic complex chiefly between 36° and 37°N. latitude. U-Pb ages have been determined for 133 zircon and 7 sphene separates from 82 samples of granitoid rocks. Granitoid rocks in this area range in age from 217 to 80 m.y. Triassic intrusions are restricted to the east side of the batholith; Jurassic plutons occur south of the Triassic plutons east of the Sierra Nevada, as isolated masses within the Cretaceous batholith, and in the western foothills of the range; Cretaceous plutons form a continuous belt along the axis of the batholith and occur as isolated masses east of the Sierra Nevada. No granitic intrusions were emplaced for 37 m.y. east of the Sierra Nevada following the end of Jurassic plutonism. However, following emplacement of the eastern Jurassic granitoids, regional extension produced a fracture system at least 350 km long into which the dominantly mafic, calc-alkalic Independence dike swarm was intruded 148 m.y. ago. The dike fractures probably represents a period of regional crustal extension caused by a redistribution of the regional stress pattern accompanying the Nevadan orogeny. Intrusion of Cretaceous granitic plutons began in large volume about 120 m.y. ago in the western Sierra Nevada and migrated steadily eastward for 40 m.y. at a rate of 2.7 mm/y. This slow and constant migration indicates remarkably uniform conditions of subduction with perhaps downward migration of parent magma generation or a slight flattening of the subduction zone. Such steady conditions could be necessary for the production of large batholithic complexes such as the Sierra Nevada. The abrupt termination of plutonism 80 m.y. ago may have resulted from an increased rate of convergence of the American and eastern Pacific plates and dramatic flattening of the subduction zone. U-Pb ages of the Giant Forest-alaskite sequence in Sequoia National Park are all in the range 99±3 m.y., indicating a relatively short period of emplacement and cooling for this nested group of plutons. U-Pb ages of a mafic inclusion and its host granodiorite indicate that both were derived from a common source or that the mafic inclusion was totally equilibrated with the granodioritic magma. Comparison of isotopic ages determined by different methods such as zircon U-Pb, sphene U-Pb, hornblende K-Ar, and biotite K-Ar suggests that zircon U-Pb ages generally approximate the emplacement age of a pluton. However, some plutons probably contain inherited or entrained old zircons, and the zircons of some samples are disturbed by younger thermal and metamorphic events. The ages reported here are consistent with U-Pb age determinations previously made on granitic rocks to the north [Stern et al., 1981], The age distribution of granitic belts determined here is in general agreement with those established by K-Ar dating [Evernden and Kistler, 1970] but does not differentiate the five epochs of plutonism determined in their study.

California↗
USGS2012

Lead and strontium isotopes and related trace elements as genetic tracers in the Upper Cenozoic rhyolite-basalt association of the Yellowstone Plateau volcanic field

Supported by various field geologic and petrologic data, the contents of Pb, U, Th, Rb, and Sr and the isotopic compositions of Pb and Sr for upper Cenozoic volcanic rocks of the Yellowstone Plateau volcanic field are consistent with the hypothesis of derivation of the basaltic and rhyolitic magmas by partial melting of distinct source regions in the upper mantle and lower crust, respectively. All the basalt samples analyzed but one have systematically lower values of 207 Pb/ 204 Pb and 87 Sr/ 86 Sr than the rhyolites. The values of 206 Pb/ 204 Pb are smaller, and 87 Sr/ 86 Sr are mostly larger than known values in oceanic basalts. In all but one case, the values of 207 Pb/ 204 Pb are higher than expected from an extrapolation of known values in oceanic basalts to less radiogenic values of 206 Pb/ 204 Pb. Because there are no xenoliths, phenocrysts are only moderate to sparse in abundance, REE patterns are low and flat at the radiogenic end of lead isotopic compositions, several values of Rb/Sr are low, and 80% of the basalt samples form a well-developed secondary isochron separate from the rhyolites, we favor an interpretation for basalt genesis wherein isotopic signatures of most mafic magmas were attained in a continental ‘keel’ of mantlelike character about 2.6 b.y. old or somewhat older attached to the crust, and these signatures were unaltered by magma passage through the crust. At the very least, the current data continue to cast serious doubt as to the inevitability of crustal contamination for basaltic magma intruding the continental environment and postulate that much can be learned about the mantle under continents through the study of continental basalts. One basalt unit with an unusually low value of 207 Pb/ 204 Pb and an 87 Ar/ 86 Ar less than 0.704 may represent subcontinental ‘keel’-derived magma that rose unaltered to the surface. Our data also are not consistent with formation of this rhyolite-basalt association primarily by such processes as crystal fractionation, separation of immiscible silicate liquids from a common parental magma, or fractional melting of a homogeneous source. Rather as a conceptual model, we envision large mafic intrusions to have been injected into the lower crust resulting in rhyolite generation through partial anatexis of the adjacent wall rocks which probably had a 206 Pb/ 204 Pb < 17 and 87 Sr/ 86 Sr > 0.709; a model that has much in common with that proposed by Holmes (1931). All the other hypotheses listed have the necessary added complication that either the basalt or the rhyolite or both become contaminated after the two magma types separated, have problems accounting for the lack of igneous rocks of intermediate compositions or production of such large volumes of rhyolitic material (∼5000 km 3 ), and fail to explain why rhyolitic magma is not a more common occurrence in the ocean basin. We appeal to bouyancy of rhyolites to generate a barrier for basalt magma migration and account for the great preponderance of rhyolite relative to basalt at the surface. Furthermore, the complex isotopic picture in the rhyolites indicates that many of these magmas interacted with the upper crustal geologic units that they traversed. The interactions involved diverse processes, probably including reacton with hydrothermal fluids or hydrothermally altered rocks at high levels as well as by contamination with Phanerozoic sedimentary and Precambrian crystalline rocks at deeper levels. At the very least, we feel our study adds a cautionary note to the currently increasingly popular hypothesis that differentiation of basalt or gabbro magmas to rhyolite or granite (as distinct from tonalite or dacite) is a common occurrence and is therefore an important continential building process. Models for formation of rhyolite and granite predominantly by reworking of crust (anatexis) must still be considered. The primitive Archean mantle of the region was characterized by higher Rb/Sr, U/Pb, and Th/U values than are typical of modern suboceanic mantle. The mantle residuum within the continental subcrustal lithosperic ‘keel’ that resulted from the Archean crustal differentiation event probably was depleted in Rb/Sr and U/Pb, and the crust was correspondingly enriched in these ratios. The crust probably was further differentiated by an Archean high-grade metamorphism, during or after the primary event, into a granulitic lower crust depleted in U/Pb and Rb/Sr and a lower-grade upper crust enriched in these ratios.

Journal of Geophysical Research Solid Earth↗
USGS2012

Northern East Pacific Rise: Magnetic anomaly and bathymetric framework

The oceanic crust in the eastern Pacific between 7°N and 30°N and east of 127°W contains a fairly complete history of the spreading centers associated with the East Pacific Rise since 25 m.y. B.P. (late Oligocene). In this paper, we have summarized the seafloor spreading magnetic-anomaly data and the bathymetric data that reflect the record of this tectonic history. The well-defined magnetic lineations north of the Clarion fracture zone, in the mouth of the Gulf of California, and on the east flank of the East Pacific Rise (EPR) are carefully examined and used to provide a guide for interpreting the spreading pattern between the Clarion and Clipperton fracture zones, southward of the Rivera fracture zone over the Mathematician Ridge, and over the entire EPR east of the Mathematician Ridge between the Rivera and Siqueiros fracture zones. The bathymetric data provide a trace of the fracture zone pattern in each of the above mentioned areas. The fracture zone bathymetry and the seafloor spreading magnetic lineations on the EPR south of the Rivera fracture zone have a distinctive fanning pattern caused by close poles of rotation and plate boundary reorganizations. All these data provide a good record of the plate reorganizations in the middle Miocene at magnetic anomaly 5 A time (12.5 to 11 m.y. B.P.), in the late Miocene at magnetic anomaly 3′−4 time (6.5 m.y. B.P.), and in the Pliocene at magnetic anomaly 2′−3 time (3.5 m.y. B.P.). Several abandoned spreading centers, including the Mathematician Ridge, were left behind as a result of these reorganizations. The Mathematician Ridge is shown to be a set of ridges and trough whose origin is related to the tectonic activity associated with each of the above mentioned reorganizations since anomaly 5A.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

The sea slope problem revisited

Discrepancies in sea surface topography based on comparisons between the results of steric leveling and repeated geodetic levelings have identified what is known as the ‘sea slope problem.’ This problem is actually twofold: (1) the sea surface relief based on steric leveling differs significantly from that based on geodetic leveling along several generally north-south coasts, and (2) successively propagated levelings between several widely separated tide stations indicate that the stationary sea slope seemingly has been changing with time, whereas differenced sea level means between these stations indicate that the sea surface relief has remained virtually invariant during the same intervals. Reexamination of the three reported discrepancies between geodetically and sterically determined sea slopes indicates that the Australian example is based on leveling of a quality inappropriate to the comparison. The discrepancy developed along the Atlantic coast of the United States is limited to the reach between Portsmouth–Hampton Roads, Virginia, and Key West, Florida, where the accuracy of steric leveling may be especially vulnerable owing to the dynamic effects of the Gulf Stream. Reconsideration of the example along the Pacific coast of the United States indicates that the various discrepancies are due chiefly to intrasurvey movement and resultant distortion of geodetically defined height differences between tide stations. Agreement between the results of steric and geodetic leveling along tectonically inactive north-south coasts devoid of strong boundary currents is generally good. This observation supports the conclusions (1) that any directionally dependent systematic error in geodetic leveling is measurably insignificant and (2) that where allowance is made for the possible effects of major boundary currents or intrasurvey movement during levelings between tide stations, the sea slope problem tends to vanish.

Journal of Geophysical Research B: Solid Earth↗
USGS2012

Earthquakes of Loihi submarine volcano and the Hawaiian hot spot

Loihi is an active submarine volcano located 35 km south of the island of Hawaii and may eventually grow to be the next and southernmost island in the Hawaiian chain. The Hawaiian Volcano Observatory recorded two major earthquake swarms located there in 1971–1972 and 1975 which were probably associated with submarine eruptions or intrusions. The swarms were located very close to Loihi's bathymetric summit, except for earthquakes during the second stage of the 1971–1972 swarm, which occurred well onto Loihi's southwest flank. The flank earthquakes appear to have been triggered by the preceding activity and possible rifting along Loihi's long axis, similar to the rift-flank relationship at Kilauea volcano. Other changes accompanied the shift in locations from Loihi's summit to its flank, including a shift from burst to continuous seismicity, a rise in maximum magnitude, a change from small earthquake clusters to a larger elongated zone, a drop in b value, and a presumed shift from concentrated volcanic stresses to a more diffuse tectonic stress on Loihi's flank. The 1971–1972 swarm began at depths of 20–50 km about 1 month before the shallow swarm started and suggests an upward migration of seismicity as the first stage of the 13-month swarm. The seismic ‘root’ of Kilauea volcano is well defined by earthquakes which plunge to the south and southwest to a depth of 50–60 km, terminating in a region in which earthquakes are associated with deep harmonic tremor and magma. The zone of these deeper earthquakes and tremor lies between Kilauea, Loihi, and Mauna Loa volcanoes, may feed magma to all three volcanoes, and probably locates the Hawaiian hot spot.

Journal of Geophysical Research Solid Earth↗