USGS Science⌕ Search

SEARCH · USGS Science

Results for “Interfaces”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,441 records · Page 80Linked to original sources

Fast-ice thickness and snow depth in relation to oil entrapment potential, Prudhoe Bay, Alaska

In winter, the undersurface of the sea ice on shallow arctic shelves acts upon the sea bed directly by contact and indirectly by influencing currents and turbulence. The under-ice surface would serve as a trap for pollutants such as oil and gas released from the sea bed. A knowledge of the morphology of the undersurface of the ice is a first step in understanding the sea-bed interactions and in evaluating the quantities, configuration, and dispersal patterns of sub-ice pollutants. Investigations show thicker sea-ice correlates with a thin snow cover and thin sea-ice underlies elongate snow ridges. In early May, 1978, the relationships between under-ice morphology, sea bed morphology, tidal currents, and variations in snow thickness were studied. At three sites representing three different environments--protected bay, deep, open lagoon, and narrow tidal channel--trenches were cut through the ice. The trenches were parallel and perpendicular to the sastrugi-sculptured northeast-southwest trending snow ridge pattern. Snow depth, ice thickness, and ice drafts were measured and an upward-directed side-scanning sonar was towed to examine the morphology of the under-ice surface in an area 100 m square. Snow depth and ice thickness vary about 30-40 cm and exhibit a negative correlation--thin ice coinciding with a thicker insulating snow cover. The areal snow and ice morphology patterns reinforced the correlation. Elongate ridge and trough patterns on the under-ice surface parallel the surface snow ridge patterns on wavelengths typically 10 m wide, yielding sub-ice voids of 25 to 47 x 10 3 m 3 /km 2 (600-1200 barrels per acre). Diving observations indicate a smaller set of depressions 5 cm or less in depth, oriented parallel to the ice crystal fabric, and an escape of sub-ice released air to the snow-ice interface. The results imply that there is a seasonal stability to the snow ridge pattern and that oil concentrations under the ice would be indicated by surficial snow morphology in the fast ice zone. Spreading directions would be enhanced in the elongate dimensions of the under-ice ridges and troughs, that is, upwind and downwind. In spring, gases will leak to the surface.

Alaska↗

Experiments using a convertible data collection platform

Experiments under the sponsorship of the U.S. Geological Survey in the use of a convertible data collection platform (CDCP) were performed by 13 organizations. Success in its use was related directly to the resources applied by the experimenter. After design faults were corrected by the manufacturer, most of the problems encountered were associated with power supplies, sensor, and sensor interfaces. In general, the CDCP and the Geostationary Operational Environmental Satellite systems performed as specified. Based on the experience gained, the Bonneville Power Administration is embarking on an operational implementation of the system, and the other organizations are continuing experimental deployment.

Open-File Report↗

210Pb-determined sedimentation rates and trace-metal concentrations, upper Klamath Lake and Lake Euwana, Oregon

Rates of sedimentation calculated from analyses of 210 Pb activities in cores from Upper Klamath Lake and Lake Euwana (Klamath County, Ore.) indicate that the lakes, whose mean depths are 2.4 m, are filling at approximately 3.5 mm/yr. In Upper Klamath Lake, average accumulation rates range from 0.9 mm/yr at a site in Howard Bay to 12.5 mm/yr at a location near the input from Agency Lake. Divers collected cores, approximately 50 cm long, from eight locations in Upper Klamath Lake and from one location in Lake Euwana; coring sites were chosen to represent a variety of sedimentary environments. Plots of excess 210 Pb activity versus depth show that a sediment-mixing layer, ranging from 5 to 20 cm in thickness, is below the sediment-water interface at all coring locations; the mixing is due to biological activity, wave and current action, and gas generation. Two cores show changes in accumulation rates during the past 100-150 years that are probably related to changes in land use. X-radiographs indicate the presence of pumice layers and allow assessment of biological activity; these two kinds of information are important to the interpretation of 210 P b activity data. Trace-metal contents were determined to establish baseline information. The eight cores from Upper Klamath Lake contain much lower concentrations of all metals measured (Cd, Cu, Cr, Fe, Pb, Mn, and Zn) than are found in other lacustrine environments. The core taken from Lake Euwana contained higher concentrations of metals than the cores collected from Upper Klamath Lake. This study was initiated in response to a concern that possible rapid accumulation of sediments in Upper Klamath Lake poses a threat to the lake's ability to support economically critical activities. The findings indicate that the lake is not filling at a rate that will cause an immediate threat to powerplant, agricultural, and recreational lake use.

Oregon↗

Results of hydraulic tests in wells DOE-1, 2, 3, Salt Valley, Grand County, Utah

Three exploratory wells were drilled for geological, geophysical, and hydrological purposes in Salt Valley, Grand County, Utah. Cap rock, salt, and interbeds of the Paradox Member of the Hermosa Formation of Middle Pennsylvanian age were penetrated. The observed depth below land surface of the cap rock-salt interface ranges from 163 meters (m) to 191 meters. Approximately the upper 100 meters of cap rock were unsaturated by ground water. Within the saturated part of the cap rock, hydraulic heads generally decrease with depth and southwestward. Ion concentrations generally increase with depth in the saturated cap rock. Hydraulic conductivity of cap rock, as determined from pumping tests, may be on the order of 5 x 10 -3 meters per day; as a result, ground-water flow rates in the cap rock are probably very low. A carbon 14 specific activity for cap rock water yielded an uncorrected "age" of greater than 36,000 years. Salt and interbeds have hydraulic conductivities probably less than 1 x 10 -4 meters per day.

Open-File Report↗

Digital models of ground-water flow in the Cape Cod aquifer system, Massachusetts

The Cape Cod aquifer system was simulated with three-dimensional finite-difference ground-water-flow models. Five areas were modeled to provide tools that can be used to evaluate the hydrologic impacts of regional water development and waste disposal. The model boundaries were selected to represent the natural hydrologic boundaries of the aquifer. The boundary between fresh and saline ground water is treated as an interface along which there is no dispersion. The saline-water zone is treated as static (nonflowing). Comparisons of calculated and observed values of head, position of the boundary between fresh and saline water, and ground-water discharge at locations where data are available indicate that the simulated ground-water reservoirs generally agree with field conditions. Model analyses indicate that the total steady-state freshwater-flow rate through the five modeled areas is approximately 412 cubic feet per second.

Massachusetts↗

Hole-to-surface resistivity measurements at Salt Valley, Utah

Evaporites are an important potential medium for the storage of radioactive wastes. In order to ascertain the viability of a proposed waste isolation site, it is necessary to study its geology without extensive drilling that might destroy its structural integrity. Hole-to-surface and hole-to-hole geophysical measurements can be useful in supplementing geologic data obtained from a few drill holes and can be used to aid the interpretation of surface geophysical measurements. The study presented in this paper was conducted at Salt Valley, Utah to test the feasibility of using hole-to-surface direct-current resistivity measurements to detect geologic inhomogeneities in evaporites. These measurements show the following: (1) It is feasible to make hole-to-surface resistivity measurements over evaporites. However, near-surface steel casing can make it difficult to quantitatively analyze the field data with present interpretation techniques. Future investigations should include theoretical studies to solve interpretation problems when steel casing is in the hole and the mud is a high-conductivity brine. (2) A comparison of measurements made from the three different source drill holes shows that the halite acts as an electrical insulator and most of the current emitted from the source is contained in the caprock. (3) A comparison of measurements made parallel and perpendicular to the valley walls shows that there are more variations in the halitecaprock interface perpendicular than parallel to the axis of the Salt Valley anticline. (4) Structurally complex interbeds within the salt may cause differences in the current distribution measured at the surface from current sources buried at different depths. (5) Total field mapping would be more useful than the single-component data that were collected in this study.

Utah↗

Decentralized shared computers in the National Earthquake Hazards Reduction Program

The needs for computer analysis in the National Earthquake Program are varied, complex, and rapidly growing. Major sources of frustration have been the difficulty of keeping up with the required analysis, and the difficulties of sharing a wide variety of data and computer programs among several hundred researchers at dozens of institutions located throughout the U.S. A major effort is underway to create a similar computer environment running on many PDP 11/70 minicomputers located across the country that encourages widespread sharing of data and "software tools" without impeding the free flow of creative ideas in this research program. Large libraries of high-level tools are provided in a well documented manner. The tools can be readily combined into programs using a new interactive language, any compiled language, or, in many cases, the Shell command language of the UNIX** Timesharing System. New tools are easily written by any user. Major system tools provided include advanced general plotting programs and a relational indexed database. Extensions to the operating system include text overlays and an 830,000 baud graphics interface.

Open-File Report↗

Hydrology of the Floridan Aquifer in Northwest Volusia County, Florida

Northwest Volusia County, in east-central Florida, is a 262-square-mile area including the southern part of the Crescent City Ridge and the northern tip of the DeLand Ridge. The hydrogeologic units in the area include the Floridan aquifer, which is made up of parts of the Lake City Limestone, the Avon Park Limestone, and the Ocala Limestone, all of Eocene age; the confining bed, which is composed of clays of Miocene or Pliocene age; and the surficial aquifer, which is made up of Pleistocene and Holocene sands. Ornamental fern growing is a $12 million per year industry in northwest Volusia County. Fern culture requires a large amount of good-quality water for irrigation, and more significantly, a large water withdrawal rate for freeze protection during winter months. The source of most water used is the Floridan aquifer. The large irrigation withdrawals, especially in winter months when spray irrigation is used for freeze protection of ferns, introduce problems such as the potential for saltwater intrusion, the temporary loss of water in domestic wells caused by large potentiometric drawdown, and increased sinkhole activity. The water budget of the surficial layer consists of 55 inches per year rainfall, 39 inches per year evapotranspiration, 13 inches per year runoff, and a net downward leakage of 3 inches per year. Average ground-water irrigational withdrawal is 8.1 million gallons per day, while the peak withdrawal rate is 300 million gallons per day during freeze-protection pumpage. The average irrigation well depth exceeds 300 feet. Transmissivities of the Floridan aquifer range from 4,500 to 160,000 feet squared per day. Highest transmissivities are in the DeLeon Springs area and the lowest are in the east Pierson area. Storage coefficients range from 0.0003 to 0.0013. The water budget of the Floridan aquifer under present conditions of withdrawal consists of 108 cubic feet per second recharge, 2 cubic feet per second horizontal ground-water inflow, 34 cubic feet per second direct discharge, 40 cubic feet per second upward leakage, 22 cubic feet per second horizontal outflow, and 14 cubic feet per second pumpage. The Floridan aquifer contains good-quality water in most of the study area, but also contains brackish water underneath the stressed zones and in the upper zones along the western and southern limits of the area. The altitude of the fresh- saltwater interface varies in the area from 1,500 to 300 feet below sea level. Areal drawdowns in the fern-growing areas of Pierson are 5 feet during growth irrigation periods and 20 to 30 feet during freeze-protection withdrawals. The drawdown in the Pierson area at the end of one intense period of pumpage exceeded 30 feet over a 4.4-square-mile area. A significant amount of the withdrawn water was replaced by leakage during the pumping period. Drawdowns in some pumping wells in northeast Pierson exceed 90 feet during freeze-protection withdrawals. No long-term residual drawdown has occurred. The predominant effect of pumpage on the water budget of the Floridan aquifer has been an increase in recharge. Sinkhole activity has been increased by the temporary increase in load on the aquifer's skeletal structure during intense lowering of the potentiometric surface. There is no evidence of saltwater intrusion, but a monitoring network for future early detection is suggested.

Open-File Report↗

Digital model evaluation of the predevelopment flow system of the Tertiary limestone aquifer, Southeast Georgia, Northeast Florida, and South South Carolina

A computer model using finite-difference techniques was used successfully to simulate the predevelopment flow regime within the multilayered Tertiary limestone aquifer system in Southeastern Georgia, Northeastern Florida, and Southern South Carolina as part of the U.S. Geological Survey 's Tertiary Limestone Regional Aquifer System analysis. The aquifer, of early Eocene to Miocene age, ranges from thin interbedded clastics and marl in the updip area to massive limestone and dolomite 1,500 feet thick in the downdip area. The aquifer is confined above by Miocene clay beds, and terminates at depth in low-permeability rocks or the saltwater interface. Model-simulated transmissivity of the upper permeable zone ranged from about 1 x 10 super 3 foot squared per day in the updip area and within parts of the Gulf Trough (a series of alinement basins filled by fine clastic in material) to about 1 x 10 super 6 foot squared per day in South Georgia, and area having large secondarily developed solution channels. The model results indicate that only about 540 cubic feet per second of water flowed through the predeveloped system, from the updip highland area of high altitude and in the areas north of Valdosta and southwest of Jacksonville, to discharge along streams in the updip area and diffuse upward leakage in the downdip area near the coast and offshore. (USGS)

Florida, Georgia, South Carolina↗

Geology and ore deposits of the Section 23 Mine, Ambrosia Lake District, New Mexico

The section 23 mine is one of about 18 large uranium mines opened in sandstones of the fluvial Westwater Canyon Member of the Jurassic Morrison Formation in the Ambrosia Lake mining district during the early 1960s. The Ambrosia Lake district is one of several mining districts within the Grants mineral belt, an elongate zone containing many uranium deposits along the southern flank of the San Juan basin. Two distinct types of ore occur in the mine. Primary ore occurs as peneconcordant layers of uranium-rich authigenic organic matter that impregnates parts of the reduced sandstone host rocks and which are typically elongate in an east-southeast direction subparallel both to the sedimentary trends and to the present-day regional strike of the strata. These are called prefault or trend ores because of their early genesis and their elongation and alinement. A second type of ore in the mine is referred to as postfault, stacked, or redistributed ore. Its genesis was similar to that of the roll-type deposits in Tertiary rocks of Wyoming and Texas. Oxidation, related to the development of a large tongue of oxidized rock extending from Gallup to Ambrosia Lake, destroyed much of the primary ore and redistributed it as massive accumulations of lower grade ores bordering the redox interface at the edge of the tongue. Host rocks in the southern half of sec. 23 (T. 14 N., R. 10 W.) are oxidized and contain only remnants of the original, tabular, organic-rich ore. Thick bodies of roll-type ore are distributed along the leading edge of the oxidized zone, and pristine primary ore is found only near the north edge of the section. Organic matter in the primary ore was derived from humic acids that precipitated in the pores of the sandstones and fixed uranium as both coffinite and urano-organic compounds. Vanadium, molybdenum, and selenium are also associated with the ore. The secondary or roll-type ores are essentially free of organic carbon and contain uranium both as coffinite and uraninite. They also contain vanadium and selenium but are virtually devoid of molybdenum. Although much has been learned about these deposits since the time this study was conducted, in 1966, a great deal more study will by required to completely elucidate their geologic history.

Open-File Report↗

Ground-water withdrawals and changes in water levels in the Houston District, Texas

During 1975-79, total withdrawals of ground water in the Houston district decreased by 9.7 percent. This percentage represents a decrease from 505 million gallons per day (22.1 cubic meters per second) during 1975, to 456 million gallons per day (20.0 cubic meters per second) during 1979. The decrease resulted from an increased use of surface water that became available from Lake Livingston on the Trinity River during late 1976. During 1975-79, withdrawals of ground water decreased in the Pasadena, Katy, Baytown-La Porte, Johnson Space Center, Texas City, and Alta Loma areas but increased in the Houston area. The decreased withdrawals in the Katy area resulted partly from a small decrease in the acreage of rice planted, but mostly from a decrease in water needed for irrigation during 1979. The pumping of ground water increased in the Houston area because of the growth in population. From spring 1975 to spring 1980, water levels rose in the southeastern one-half of the district and declined in the northwestern one-half. The maximum rise of water levels in wells in the Chicot aquifer was 110 feet (33.5 meters); the maximum rise in wells in the Evangeline aquifer was 150 feet (45.7 meters). The maximum decline of water levels in wells in the Chicot aquifer was 60 feet (18.3 meters); the maximum decline in wells in the Evangeline aquifer was 70 feet (21.3 meters). No significant changes occurred in the chloride concentration in water from wells in the Alta Loma area during 1975-79. The concentration of chloride in water from a well completed in the middle part of the Chicot aquifer at Hitchcock is increasing, probably because of updip migration of the freshwater-saltwater interface.

Open-File Report↗

Ground-water flow in the New Jersey coastal plain

Flow was simulated in 10 aquifers of the New Jersey Coastal Plain using a multilayer finite-difference model for prepumping steady-state conditions and transient conditions from 1896-1981. The highest transmissivity, greater than 10,000 sq ft/day, is in Camden and Gloucester Counties in the Potomac-Raritan-Magothy aquifers; Monmouth and Ocean Counties in the middle aquifer of the Potomac-Raritan Magothy aquifer system; and Ocean, Burlington, Atlantic, and Cape May Counties in the Kirkwood-Cohansey aquifer system. Confining unit leakance is highest, > than 0.001 ft/day/ft in updip areas and lowest, < 0.00001 ft/day/ft, in downdip areas. Areas near the center of the major cones of depression approximate steady-state conditions. However, downdip and offshore areas are under transient conditions. Simulated head changes along the saltwater- freshwater interface boundary indicate that the lower aquifer of the Potomac-Raritan-Magothy aquifer system and the confined Kirkwood aquifer have the greatest potential for updip movement of chlorides. The simulated sources of water to wells in 1978 include: (1) 3% from aquifer storage; (2) 3% from boundary flows; (3) 4% from the ocean and bays; and (4) 90% from streamflow. (USGS)

New Jersey↗

Programs for generating data tables for the annual water-resources data report of the U.S. Geological Survey

The U.S. Geological Survey has developed software that interfaces with the Automated Data Processing System to facilitate and expedite preparation of the annual water-resources data report. This software incorporates a feature that prepares daily values tables and appends them to previously edited files containing station manuscripts. Other features collate the merged files with miscellaneous sections of the report. The report is then printed as page-size, camera-ready copy. All system components reside on a minicomputer; this provides easy access and use by remote field offices. Automation of the annual report preparation process results in significant savings of labor and cost. Use of the system for producing the 1986 annual report in the North Carolina District realized a labor savings of over two man-months. A fully implemented system would produce a greater savings and speed release of the report to users.

Open-File Report↗

Water resources and the hydrologic effects of coal mining in Washington County, Pennsylvania

Washington County occupies an area of 864 square miles in southwestern Pennsylvania and lies within the Pittsburgh Plateaus Section of the Appalachian Plateaus physiographic province. About 69 percent of the county population is served by public water-supply systems, and the Monongahela River is the source for 78 percent of the public-supply systems. The remaining 31 percent of the population depends on wells, springs, and cisterns for its domestic water supply. The sedimentary rocks of Pennsylvanian and Permian age that underlie the county include sandstone, siltstone, limestone, shale, and coal. The mean reported yield of bedrock wells ranges from 8.8 gallons per minute in the Pittsburgh .Formation to 46 gallons per minute in the Casselman Formation. Annual water-level fluctuations usually range from less than 3 ft (feet) beneath a valley to about 16 ft beneath a hilltop. Average hydraulic conductivity ranges from 0.01 to 18 ft per day. Water-level fluctuations and aquifer-test results suggest that most ground water circulates within 150 ft of land surface. A three-dimensional computer flow-model analysis indicates 96 percent of the total ground-water recharge remains in the upper 80 to 110 ft of bedrock (shallow aquifer system). The regional flow system (more than 250ft deep in the main valley) receives less than 0.1 percent of the total ground-water recharge from the Brush Run basin. The predominance of the shallow aquifer system is substantiated by driller's reports, which show almost all water bearing zones are less than 150ft below land surface. The modeling of an unmined basin showed that the hydrologic factors that govern regional groundwater flow can differ widely spatially but have little effect on the shallow aquifers that supply water to most domestic wells. However, the shallow aquifers are sensitive to hydrologic factors within this shallow aquifer system (such as ground-water recharge, hydraulic conductivity of the streamaquifer interface, and hydraulic conductivity of the aquifer). A vertical fracture zone would probably increase ground-water availability within the zone and would probably result in a lower head in the shallow aquifers in an upland draw area and an increased head in a valley. l Streams in the northern and western parts of the county drain to the Ohio River and streams in the eastern and southern parts of the county drain to the Monongahela River. The computed 7-day, 10-year low-flow frequencies for the surface-water sites ranged from 0.0 to 55 x 10-3 cubic feet per second per square mile. The lowest low-flow discharges per square mile were in the south-central and southwestern parts of the county. The highest low-flow discharges per square mile were in the eastern and northern parts of the county. The annual water loss at five gaged streams ranged from 52 to 75 percent of the total precipitation. The loss resulted from evaporation, transpiration, diversion, mines, ground-water outflow from the system, and plant and animal consumption. The major ground-water-quality problems are elevated concentrations of iron, manganese, and dissolved solids, and very hard water. Minor groundwater-quality problems include elevated concentrations of fluoride, chloride, and sulfate. Downgradient along the ground-water flow path, principal ions change from mostly calcium, magnesium, sulfate, and bicarbonate to sodium and chloride. Dissolyed-solids concentrations generally increase with residence time .. Elevated concentrations of sulfate and total dissolved solids were common at the surface-water sites in the northern and eastern parts of the county where most of the active and abandohed coal mines are located and where acid mine drainage is most prevalent. However, measured alkalinity at most of the surface-water sites ranged from 86 to 345 milligrams per liter, indicating that these streams would have a neutralizing effect on most inflows of acid mine drainage. The model of the hypothetically mined Brush Run basin shows that the vertical hydraulic conductivity (either existing or induced by mine subsidence) between the shallow ground-water system and the mine, and the depth to the mine are critical controls on the amount of ground water entering the mine. When the vertical hydraulic conductivity was increased by a factor of four for a mine about 250 ft deep in the main valley, inflow to the mine increased almost by the same factor. The model also shows that increasing the depth to a mine by 200 ft (mine about 450 ft deep in main valley) would cause mine inflow to decrease one order of magnitude. Comparisons between stream discharges during low base-flow conditions in a mined basin (Daniels Run) and an unrnined basin (Brush Run) indicated that the deep mining did not substantially lower streamflow. Although streamflow decreased and, at times, completely disappeared in the middle and lower parts of Daniels Run basin, it reappeared again downstream as ground-water discharge and was part of the flow at the mouth of Daniels Run. Comparison of the water-quality characteristics of the two basins showed that concentrations of dissolved solids, sulfate, sodium, chloride, fluoride, and manganese were greater in the mined basin than in the unmined basin. The pH and iron concentrations were similar in both basins.

Pennsylvania↗

An evaluation of installation methods for STS-1 seismometers

This report documents the results of a series of experiments conducted by the authors at the Albuquerque Seismological Laboratory (ASl) during the spring and summer of 1991; the object of these experiments was to obtain and document quantitative performance comparisons of three methods of installing STS-1 seismometers. Historically, ASL has installed STS-1 sensors by cementing their thick glass base plates to the concrete floor of the vault (see Peterson and Tilgner, 1985, p 44 and Figure 31, p 51 for the details of this installation technique). This installation technique proved to be fairly satisfactory for the China Digital Seismic Network and for several sets of STS-1 sensors installed in other locations since that time. However, the cementing operation is rather labor intensive and the concrete requires a lengthy (about 1 week) curing time during which the sensor installed on it is noisy. In addition it is difficult to assure that all air bubbles have been removed from the interface between the cement and the glass base plate. If air bubbles are present beneath the plate, horizontal sensors can be unacceptably noisy. Moving a sensor installed in this manner requires the purchase of a new glass base plate because the old plate normally can not be removed without breakage. Therefore, this study was undertaken with the aim of developing an improved method of installing STS-1's. The goals were to develop a method which requires less field site labor during the installation and assures a higher quality installation when finished. In addition, the improved installation technique should promote portability. Two alternate installation techniques were evaluated in this study. One method replaces the cement between the base plate and the vault floor with sand. This method has been used in the French Geoscope program and in several IRIS/IDA installations made by the University of California at San Diego (UCSD) and possibly others. It is easily implemented in the field and is quite cheap. The other method utilizes a so called warpless housing designed by E. Wielandt and implemented at ASL. This housing is quite similar to the case design of the STS-2 sensor system. It is designed to minimize the effects of atmospheric pressure variations on the sealed housing.

Open-File Report↗

Geochemistry and migration of contaminants at the Weldon Spring chemical plant site, St. Charles County, Missouri, 1989-91

The geochemistry of the shallow aquifer and geochemical controls on the migration of uranium and other constituents from raffinate pits were determined at the Weldon Spring chemical plant site. Surface-water samples from the raffinate pits con- tained large concentrations of calcium, magnesium, sodium, potassium, sulfate, nitrite, lithium, moly- bdenum, strontium, vanadium, and uranium. Analyses of interstitial-water samples from raffinate pit 3 indicated that concentrations of most constituents increased with increasing depth below the water- sediment interface. Nitrate and uranium were not chemically reduced and attenuated within the raffinate pits and can be expected to migrate into the overburden. Laboratory sorption experiments were performed to evaluate the effect of pH value on the sorption of several raffinate constituents by the overburden. No sorption of calcium, sodium, sulfate, nitrate, or lithium was observed. Sorption of molybdenum was dependent on solution pH and sorption of uranium was dependent on solution pH and carbonate concentration. The sorption of uranium and molybdenum was consistent with sorption controlled by oxyhydroxides. The quality of water collected in overburden lysimeters near raffinate pit 4 can be modeled as a mixture of water from raffinate pits 3 and 4, and an uncontaminated com- ponent in a system at equilibrium with ferrihydrite and calcite. Increased constituent concentrations in a perennial spring north of the site were the result of a subsurface connection between the spring and several losing stream segments receiving runoff from the site, in addition to seepage from the raffinate pits.

Open-File Report↗

Simulation of the effects of ground-water withdrawals and recharge on ground-water flow in Cape Cod, Martha's Vineyard, and Nantucket Island basins, Massachusetts

The effects of changing patterns of ground-water pumping and aquifer recharge on the surface-water and ground-water hydrologic systems were determined for the Cape Cod, Martha's Vineyard, and Nantucket Island Basins. Three-dimensional, transient, ground-water-flow modelS that simulate both freshwater and saltwater flow were developed for the f1ow cells of Cape Cod which currently have large-capacity public-supply wells. Only the freshwater-flow system was simulated for the Cape Cod flow cells where public-water supply demands are satisfied by small-capacity domestic wells. Two- dimensional, finite-difference, change models were developed for Martha's Vineyard and Nantucket Island to determine the projected drawdowns in response to projected in-season pumping rates for 180 days of no aquifer recharge. Results of the simulations indicate very little change in the position of the freshwater-saltwater interface from predevelopment flow conditions to projected ground-water pumping and recharge rates for Cape Cod in the year 2020. Results of change model simulations for Martha's Vineyard and Nantucket Island indicate that the greatest impact in response to projected in-season ground-water pumping occurs at the pumping centers and the magnitude of the drawdowns are minimal with respect to the total thickness of the aquifers.

Massachusetts↗

Structure of the basins and ranges, Southwest New Mexico, an interpretation of seismic velocity sections

This report presents a geologic appraisal of seismic velocity sections that profile a total of 790 km in southwest New Mexico west of Las Cruces and south of Lordsburg and Deming. The present work outlines the contribution of these velocity sections to estimating areas favorable for mineral resource occurrences. Seismic refraction surveys are carried out with the initial goal of estimating the subsurface distribution of acoustic compressional velocity (Vp), which may ultimately be interpreted to provide information on lithology, geologic structure, and the occurrence of natural resources. The seismic sections presented here show velocity detail having dimensions of 100's to 1000's of meters to a depth of about 2.5 km, and across a net of traverses that profile most basins well as several ranges in the study area. Figure 1 shows the location of the seismic refraction lines. The lines are designated 1, 2, 3, 4, 5, and 7; there is no line 6. The survey covers a broad swath of the southwest Basin and Range Province extending from the Arizona border eastward to the Rio Grande River, and from the Mexican border to about lat. 32° 30' N. Lines 1, 3, and 7 traverse the axis of basins in roughly northsouth directions; the remaining lines 2, 4, and 5 trend east-west and cross various ranges and basins. Seismic data that have been collected in this region include deep-crustal refraction traverses by university scientists and commercial seismic reflection profiles acquired for petroleum exploration. Results of deep-crustal refraction studies are reviewed to provide a regional setting for the higher resolution refraction data. Results from seismic reflection will not be discussed. Industry reflection data in the area are not generally available for non-proprietary use. The nearest reflection data publicly available are in the Socorro area, about 80 km north of the present study area (Brown and others, 1980). These data were acquired by the Consortium for Continental Reflection Profiling (COCORP), a public-supported research group, to investigate the possibility of magma beneath part of the Rio Grande valley. Up to 1978 there were about 36 deep borings in the region of southwest New Mexico (Thompson and others, 1978). This drilling resulted mainly from an evaluation of petroleum potential of the Pedrogosa basin which is an extensive area of Paleozoic subsidence in Arizona, New Mexico, and Mexico that accumulated about three kilometers of Paleozoic sedimentary rock (Zeller, 1965; Thompson and others, 1978). Of these drill holes, 25 are close enough to the present seismic sections to provide correlations of velocity to lithology, and to provide an estimate of the errors associated with depth-to-interface interpretations. This information is summarized prior to considering the implications of the seismic sections in detail. The major portion of the report centers around two plates: Plate I shows seismic lines and selected drill hole locations superimposed on gravity contours, and Plate II shows velocitysections with drill hole summaries. These plates provide the foundation for developing inferences on buried lithologic, structural, and mineral resources for the region.

New Mexico↗